Search

Alternanthera philoxeroides and Hypophthalmichthys molitrix offer significant nutritional benefits. This study evaluates the proximate composition, amino acid profile, GC-MS analysis, FT-IR spectroscopy, SEM and EDX, and color values of edible paper sheets (EPSs) derived from Alternanthera philoxeroides incorporating different levels of Hypophthalmichthys molitrix flesh. The protein content in the EPSs varied based on fish flesh incorporation, peaking at 52.66% in Ap100/Hm300 (Non-boil). Protein and carbohydrate contents showed an inverse correlation across EPSs, with the highest carbohydrate content of 60.89% in sample Ap400/Hm0 (Boil). Lipid content was also found to correlate with H. molitrix flesh content in EPSs, ranging from 1.59% to 18.41%. Amino acid analysis identified 11 types, with methionine as the most prevalent, followed by leucine, phenylalanine, and lysine. GC-MS analysis revealed 51 bioactive compounds, including carbonic acid, hentriacontane, and various fatty acids. FT-IR analysis showed characteristic bonds, while color analysis displayed L* values ranging from 24.37 to 30.97. SEM analyses depicted the microstructure, surface view, and elemental composition of the EPSs, and EDX showed an abundance of Ca, N, K, O, C, Mg, Na, P, Cl, Mn, and Fe. Therefore, EPSs prepared from A. philoxeroides and H. molitrix could offer a promising approach for effectively utilizing aquatic biomass and providing both plant and animal nutrients to consumers. [ABSTRACT FROM AUTHOR]

Hibiscus cannabinus (kenaf) is an annual fiber crop grown in warm seasons and known for its remarkable productivity; it has been cultivated worldwide for thousands of years as a fiber source. While every part of the plant can be utilized for some purpose, its primary significance lies in the diverse applications of its cellulosic fiber. Kenaf features a blend of long bast and short core fibers, rendering it suitable for various industrial uses. Initially utilized for cordage and livestock feed, kenaf's applications have expanded over the last century to encompass its utilization as paper pulp, biocomposites, textiles, biomass energy, seed oil, filtration aids, industrial absorbents, and even as a component of potting medium or as a potential source of medicine. Although traditionally a niche crop, the discovery of its diverse applications positions kenaf for rapid expansion in production in the upcoming decades. This article aims to explore the manifold applications of kenaf, highlighting those with the greatest future potential and discussing those that hold promise for commercial-level application with additional research. [ABSTRACT FROM AUTHOR]

Herein, a paper-based glucose/air biofuel cell (BFC) was constructed and implemented for self-powered pesticide detection. Our developed paper-based chip relies on a hollow-channel to transport fluids rather than capillarity, which reduces analysis times as well as physical absorption. The gold nanoparticles (Au NPs) and carbon nanotubes (CNTs) were adapted to modify the paper fibers to fabricate the flexible conductive paper anode/cathode electrode (Au–PAE/CNT–PCE). Molecularly imprinted polymers (MIPs) using 2,4-dichlorophenoxyacetic acid (2,4-D) as a template were synthesized on Au–PAE for signal control. In the cathode, bilirubin oxidase (BOD) was used for the oxygen reduction reaction. Based on a competitive reaction between 2,4-D and glucose-oxidase-labeled 2,4-D (GOx-2,4-D), the amount of GOx immobilized on the bioanode can be simply tailored, thus a signal-off self-powered sensing platform was achieved for 2,4-D determination. Meanwhile, the coupling of the paper supercapacitor (PS) with the paper-based chip provides a simple route for signal amplification. Combined with a portable digital multi-meter detector, the amplified signal can be sensitively readout. Through rational design of the paper analytical device, the combination of BFC and PS provides a new prototype for constructing a low-cost, simple, portable, and sensitive self-powered biosensor lab-on-paper, which could be easily expanded in the field of clinical analysis and drug delivery. [ABSTRACT FROM AUTHOR]

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

Paper-based biofuel cells have the potential to serve as health monitoring devices for urinary glucose and volume by incorporating the fabricated electrodes into nursing diapers. In this study, we evaluate the output power and stability of a biofuel cell by combining 3D impedance measurement and admittance analysis. The 3D impedance-based analysis method can simultaneously detect changes in the overall electrode structure of the enzyme electrode and in the quantity of active enzymes and mediators on the electrode surface. The biofuel cell electrodes were fabricated via screen-printing, using polydimethylglycidyl (poly-GMA)- modified MgO-templated carbon (GMgOC) or poly-GMA-unmodified MgO-templated carbon (NMgOC). The enzymes used were flavin adenine dinucleotide-dependent glucose dehydrogenase and bilirubin oxidase, with Azure-A serving as the mediator. Admittance analysis was utilized to measure the enzyme activity and estimate the charge transfer resistance by extrapolating the spectra obtained through admittance analysis. The charge transfer resistances of both electrodes exhibited a greater stability for the GMgOC electrode. This can be attributed to the covalent immobilization of the enzyme and mediator on the electrode facilitated by GMgOC, effectively suppressing enzyme and mediator elution. The electric double-layer capacitance values of both electrodes indicated the overall stability of the electrode structure during the measurement. [ABSTRACT FROM AUTHOR]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined. • The paper analyses the energy strategies in the pulp and paper industry in Sweden. • Energy strategies focus both to improve energy efficiency and develop new energy-products. • The companies' energy strategies combined exploitation and exploration. • A number of managerial implications are presented. [ABSTRACT FROM AUTHOR]

Fly ash (FA) and exhausted bed sands (sands wastes) that are generated in biomass burners for energy production are two of the wastes generated in the pulp and paper industry. The worldwide production of FA biomass is estimated at 10 million tons/year and is expected to increase. In this context, the present work aims to develop one-part alkali-activated materials with biomass FA (0–100 wt.% of the binder) and sands wastes (100 wt.% of the aggregate). FA from two different boilers, CA and CT, was characterized and the mortar's properties, in the fresh and hardened conditions, were evaluated. Overall, the incorporation of FA decreases the compressive strength of the specimens. However, values higher than 30 MPa are reached with 50 wt.% of FA incorporation. For CA and CT, the compressive strength of mortars with 28 days of curing was 59.2 MPa (0 wt.%), 56.9 and 57.0 MPa (25 wt.%), 34.9 and 46.8 MPa (50 wt.%), 20.5 and 13.5 MPa (75 wt.%), and 9.2 and 0.2 MPa (100 wt.%), respectively. The other evaluated characteristics (density, water absorption, leached components and freeze–thaw resistance) showed no significant differences, except for the specimen with 100 wt.% of CA. Therefore, this work proved that one-part geopolymeric materials with up to 90 wt.% of pulp and paper industrial residues (FA and sand) can be produced, thus reducing the carbon footprint associated with the construction sector. [ABSTRACT FROM AUTHOR]

[Display omitted] • New biocathode including BOD, 4-APA, and BP electrode (BP/4-APA/BOD is suggested. • The biocathode is prepared by electrografting method. • Membraneless paper type EBFCs using this biocathode are fabricated. • This paper type EBFC is well operated even in a condition of living body fluid. • OCV/MPD of this paper type EBFC are 0.612 ± 0.002 V/92.025 ± 0.892 μW cm−2. A new biocathode consisting of bilirubin oxidase (BOD), 4-aminophthalic acid (4-APA) and buckypaper (BP) electrode is suggested for enzymatic biofuel cells (EBFCs). Here, to enhance the electron transfer rate of BOD, electrografting method is imported. When this method and 4-APA are utilized, BP surface has negative charges by the polarity arrangement of 4-APA, forming BP/4-APA structure. With the modification of surface charge, T1 active site within BODs having positive charges are strongly bonded with the negative charges of BP/4-APA in neutral pH condition, while the orientation of T1 site is well aligned by electrostatic interaction. This treatment increases both reactivities of cathodic reaction and EBFC performance. To prove that, the performance of membraneless paper-type EBFCs using the new flexible BP/4-APA/BOD biocathode is investigated. According to the evaluations, their maximum power density and open circuit voltage are 92.025 ± 0.892 μW cm−2 and 0.612 ± 0.002 V with injection of 10 mM glucose which is a condition of living body fluid. Such performances are far better than those of other membraneless EBFCs and are large enough to be utilized as a power source of implantable devices for the human body. [ABSTRACT FROM AUTHOR]

The demand for biomass utilization is increasing because of the depletion of fossil resources that are non-renewable in nature. Lignin is the second most renewable organic carbon source, but currently it has limited scope for application in the chemical and fuel industries. Lignin is a side product of the paper and pulp, sugar, and 2G bioethanol industries. Many research groups are working on the value-addition of lignin. Among the lignin depolymerization methods, catalytic hydropyrolysis is gaining attention and is playing a crucial role in developing biorefinery. The hydropyrolysis of lignin was conducted at a higher temperature in the presence of H2. The hydropyrolysis of lignin results in the selective formation of non-oxygenated cyclic hydrocarbons in a shorter reaction time. It is possible to use the cyclic hydrocarbons directly as a fuel or they can be blended with conventional gasoline. This review focuses on the prior art of pyrolysis and hydropyrolysis of lignin. Possible products of lignin hydropyrolysis and suitable synthetic routes to obtain non-oxygenated cyclic hydrocarbons are also discussed. The influence of various process parameters, such as type of reactor, metal catalyst, nature of catalytic supports, reaction temperature, and H2 pressure are discussed with regard to the hydropyrolysis of lignin to achieve good selectivity of cyclic hydrocarbons. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass (LB) is widely used in the field of renewable energy production because of its low price and easy availability. Many kinds of fuels from LB have been developed and are being used in our daily lives. The LB energy has become an indispensable part in the energy mix on account of its steady and sustainable supply. However, there are some neglected issues and misconceptions regarding its development and utilization, although it has numerous advantages over other energy sources. Firstly, its development and utilization can change the living environment of organisms and decrease biodiversity to some extent, relative to using other sources of energy. Secondly, it is not a completely carbon-neutralized fuel as has been claimed in some literature. Finally, its excessive exploitation can seriously damage the environment and biosystems. This editorial will give a brief discussion on some neglected issues and misconceptions during its development and utilization for its suitable exploitation. [ABSTRACT FROM AUTHOR]

Arctic melting is an effect of climate change; the use of fossil fuels in marine shipping emits large amounts of air emissions that impact climate change, and Arctic aquatic and human life. Swedish pulp and paper mills generate large amounts of waste and side streams that could be utilized. The production of forest-based biofuel may be a promising solution to achieve sustainable Arctic marine shipping. This review highlights the socio-economic impacts associated with the production of forest-based biofuel in Sweden, the related opportunities, challenges, knowledge gaps, and further need of research. From the economic perspective, it was found that the production and use of forest-based biofuel have short and long-term economic sustainability benefits: (a) short-term benefits, the use of the waste and side streams of the pulp and paper industry is a low-cost available feedstock, unlike first-generation biofuel from crops like corn forest-based biofuels neither require additional land use, water resources nor compete with food. (b) Long-term benefits: (i) the Swedish shipping sector depends on imported fossil fuels, these new biofuels can replace partly those imported fossil fuels that will reduce shipping costs, and generate economic benefits for local consumers. (ii) Usage of forest-based biofuels as blends with conventional fuels in existing engines will reduce greenhouse gas emissions from the Arctic shipping to the set limits in the region. (iii) One of the important socioeconomic impacts of forest-based biofuel production and use is the new job creation and employment opportunities that will impact the local communities and livelihoods of indigenous people in the area. From a societal perspective, stakeholder involvement is essential to address the sustainability challenges of biofuel production: EU policymakers need to encourage the production and use of biofuels by developing policies that promote biofuel use. Further studies are needed to develop more efficient and low-cost biofuel production routes, more investments in related research and development are required as well. Local indigenous communities must be involved in the decision-making process through surveys, local dialogues, and research studies. The production of forest-based biofuels has great potential and many social-economic impacts alongside the environmental benefits. [ABSTRACT FROM AUTHOR]

Sustainable power generation for portable electronic devices is of high interest due to increasing energy demands. Miniaturized biofuel cells are well-reported for this purpose where ubiquitous fluids, like glucose or lactate, can be leveraged. However, such biofuel cells need enzymes to complete the catalysis, leading to many prevalent issues like the longevity of enzymes, complicated immobilization, additional mediators etc. Therefore, non-enzymatic glucose biofuel cells (NEGBFCs) are gaining interest due to their cost-effectiveness, high repeatability and excellent stability. However, based on our best knowledge such glucose biofuel cells are not reported in microfluidic environment, and therefore their potential is not exploited. Realization of the functionality of such NEGBFCs in a microscale is crucial to replace them with their enzymatic counterparts. In this work, for the first time, a microfluidic non-enzymatic glucose biofuel cell (μNEGBFC) is developed on a paper-based platform using metallic catalysts. The catalysts for electrocatalytic energy generation is fabricated using electrodeposition method and their detailed physicochemical characterizations are done. The μNEGBFC is capable of producing a power density of 12.5 μW/cm2 with a stable potential of 410 mV. This green power output can be used to operate low-power micro-devices and lab-on-chip sensors in a more continual and viable manner. [Display omitted] • A simple, cost-effective electrodeposition technique was used for electrode fabrication. • Gold deposited anode and copper deposited cathode were used as electrodes. • A paper-based Microfluidic Non-Enzymatic Biofuel Cell (μNGBFC) was constructed. • The developed μNGBFC generated a power density of 12.5 μW/cm2. • The μNGBFC was capable of retaining 56% of the initial power after 72 h. [ABSTRACT FROM AUTHOR]

In this study, eco-friendly and disposable paper-based membraneless microfluidic enzymatic fuel cells (EFCs) were developed without any mediators to reduce the toxicity and cost of EFCs. Glucose oxidase and laccase were immobilized on multi-walled carbon nanotube electrodes to catalyze the redox reaction of glucose and oxygen. Micromachining techniques well-suited for mass production were used to precisely fabricate micro-scale Y-shaped and cross-shaped EFCs. Experimental measurements showed that the concentration of glucose in the fuel solution affects the cell performance, which occurs because the flow speed of the fuel stream decreases as the concentration of glucose increases. The highest performance of power density (104.2 ± 3.35 μW cm−2) and current density (615.6 ± 3.14 μA cm−2) were obtained with the Y-shaped channel configuration at a glucose concentration of 100 mM. This performance is the best of all paper-based single EFCs reported to date. The new paper-based co-laminar flow mediatorless EFC exhibits strong potential to power miniaturized and portable on-site diagnostic devices. • The first mediatorless paper-based co-laminar flow enzymatic fuel cell was developed. • A glucose biofuel cell was micromachined to be precise and mass-producible. • The microchannel of the biofuel cell was designed with Y-shaped and cross-shaped structures. • Electrolyte flow speed decreased with the rise of glucose concentration in the electrolyte. • The proposed fuel cell shows better performance than enzymatic fuel cells with a mediator. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ex-situ catalytic pyrolysis of paper sludge was demonstrated in a pilot plant. • >99 wt% of minerals in the paper sludge are recovered. • The bio-oil with HHV of 40.9 MJ kg−1 is produced with a carbon yield of 21%. • The bio-based chemicals mainly contain paraffins, olefins, and aromatics. Paper sludge is a solid waste by-product abundantly produced in the paper industry and contains fine minerals and lignocellulosic biomass. In this contribution, the ex-situ catalytic fast pyrolysis of paper sludge with a high mineral content of ca. 71 wt% is reported for the first time and demonstrated in a pilot-scale unit (feeding rate of 11.3 kg h−1) using a granular Na 2 CO 3 /γ-Al 2 O 3 catalyst (loading of 650 g) to produce a high-grade bio-oil at a fast pyrolysis temperature of 475 ± 5 °C (pre-screened using a pyroprobe) and a catalytic upgrading temperature of 500 °C. Besides, > 99 wt% minerals in the paper sludge could be recovered, including paper fillers such as CaCO 3 (major) and talc. The bio-oil obtained at a carbon yield of 21 C.% has a low oxygen content of 3.2 wt%, a low total acidity number of 5.2 mg KOH g−1, low H 2 O content of 0.7 wt%, and a high higher heating value of 40.9 MJ kg−1. It consists of value-added bio-based chemicals such as paraffins, olefins, and low molecular weight aromatics. The results demonstrate that the use of paper sludge to recover minerals and to obtain fuels and chemicals using ex-situ catalytic pyrolysis is technically feasible at a pilot plant scale, which will be of importance for the development of future bio-based economy. [ABSTRACT FROM AUTHOR]

The objective of this study is to analyze the economic viability of municipal household solid waste (organic matter + paper) for the production of gas, coke and biofuel through the pyrolysis and distillation process. The waste was collected in the city of Belém do Pará-Brazil and pretreated at the Federal University of Pará. The analyzed fraction (organic matter + paper) was subjected to the pretreatment of drying, crushing, and sieving and was subsequently subjected to proximate characterization and, finally, pyrolysis of the organic fraction (organic matter + paper) in a fixed bed reactor. Initially, it was necessary to review the literature, and with the yields obtained by pyrolysis of the fraction, economic feasibility analyses were carried out. The economic indicators for evaluating the most viable pyrolysis process were basic payback, discounted payback, net present value, internal rate of return, and profitability index, which are all financial metrics commonly used in investment analysis and decision making. These metrics provide valuable insights into the financial viability and attractiveness of investment projects. They are essential tools for assessing the feasibility and profitability of various ventures, helping decision-makers make informed choices in allocating resources. The analysis of the indicators showed the economic viability considering an analysis horizon of 10 years of materials based on organic material and paper. The breakeven point obtained was USD 0.96/dm3 and the minimum biofuel sales price found in this project was USD 1.30/dm3. The sensitivity research found that material costs (organic matter + paper), bio-oil yield, total project investment and electricity, respectively, are the variables that most affect the minimum biofuel sales price. [ABSTRACT FROM AUTHOR]

Introduction and aim. Prototheca is the only alga regarded as pathogenic. Much less frequently, infections can be also caused by Chlorella, which is a widely-known dietary supplement. Unlike Prothoteca algae, Chlorella contains chlorophyll and can be used in the production of biofuel as well as electric and thermal energy. The purpose of this review is to analyze cases of chlorella infection. Material and methods. The literature review was performed by analyzing research and review articles from the Pubmed and ScienceDirect databases published over the last 50 years. Analysis of literature. The first case of infection caused by Chlorella was reported in a lamb in 1973 and from then on infections in other species of mammals (mostly herbivorous), reptiles and fish have been observed. So far, two cases of chlorellosis in humans have been con- firmed, the last one in 2014 in Australia. Both infections were a result of a mechanical trauma in freshwater. In 2014 the patient developed aggressive Chlorella infection with necrosis of adipose tissue through bursa and into the paratenon of patellar tendon where it was necessary to perform debridement and bursectomy. It seems that in both cases negative pressure wound therapy brought about successful results. Conclusion. The studies on algae will open up perspectives for better prevention and treatment of infections caused by non-typical organisms such as Chlorella. [ABSTRACT FROM AUTHOR]

This paper uses the biomass of livestock, poultry manure and straw to study the resource utilization and integration technology by division and classification. The SPSS regression analysis and integration were applied to analyze the economic benefits of the base period (2018) and the audit period (2020). The analysis gives an opportunity in rural areas to reduce chemical fertilizers, pesticides, electricity and coal cost in planting, and this paper opens a novel window for utilizing renewable energy resources and reducing carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

Producers of biofuels for the EU market may use 'low ILUC-risk' certification as evidence that they have not deprived other economic sectors of feedstock material, and hence that indirect land use change (ILUC) emissions have been avoided. At present, the uptake of low ILUC-risk certification is limited to a handful of niche projects, as there is little commercial incentive for obtaining certification. This may be considered a missed opportunity, because low ILUC-risk farming methods offer a range of sustainability co-benefits beyond the mitigation of ILUC emissions. This paper examines the policy foundations of low ILUC-risk and develops policy recommendations that would aim to confer advantages to low ILUC-risk biofuels. Some weaknesses in the low ILUC-risk system's environmental safeguards are also highlighted. [ABSTRACT FROM AUTHOR]

The present paper deals with the evaluation of the impact of newly developed biofuels together with a comparison with conventionally produced fuel, diesel, in terms of their impact on the technical and emission condition of a studied vehicle. The main energy and emission parameters of the internal combustion diesel engine were evaluated. For laboratory experiments, a discrete test method was used for comprehensive assessment, the procedure of which is described in the methodology of the paper together with a description of the measurement chain designed to achieve the determined results. The paper deals with the evaluation of the measured results of power, torque, consumption, and emissions such as CO2 and absorption coefficient. Among the technical parameters, the power and torque drop were observed for each biofuel. The decrease is attributed to lower values of calorific value, viscosity, and density. A positive effect was observed for the CO2 and absorption coefficient emission parameters, i.e., a decrease for each of the newly developed biofuels studied. [ABSTRACT FROM AUTHOR]

Although there are some issues and concerns about the World Trade Organization dispute settlement system, it remains an effective tool for countries to find reasonable solutions for their trading problems. This paper aims to identify the mechanisms of the settlement process between WTO members and to provide a relevant review of the European Union's trade disputes, in particular for energy sector cases. For this purpose, the paper implies a conceptual and descriptive framework and a qualitative approach regarding the EU's trade disputes, especially for energy sector. The results show that the EU is one of the most frequent members in trade disputes, but most of them are concluded. At the same time, most of the cases in the energy sector remain in the consultation phase, the EU being complained by Argentina, Indonesia, Russia, China and Malaysia for sectors related to biodiesel, renewable energy generation and oil palm-based biofuels. [ABSTRACT FROM AUTHOR]

Wood-processing facilities, including pulp, paper, lumber, and engineered wood facilities, use large amounts of energy for such purposes as evaporative drying and the curing of adhesives. Much of that energy is already being supplied by the incineration of biomass, and there is opportunity to increase the proportion of renewable energy that is used. Specific changes can be made within such factories that allow them to come closer to what is thermodynamically possible in terms of avoiding the wastage of exergy, which can be defined as useful energy. Savings in exergy are often obtained by optimization of a network of heat exchangers within an integrated system. No steam should be allowed to leak to the atmosphere; rather the latent heat (due to phase transitions) and sensible heat (due to temperature changes) are recovered during the heating up of incoming air and water, ideally at a similar range of temperatures. Thus, by a combination of process integration and full utilization of cellulosic residues generated from the process, even bio-based industries can be made greener. [ABSTRACT FROM AUTHOR]

The development and utilization of biomass energy based on the thermochemical conversion of crop biomass to produce hydrogen are of great significance for promoting China's ecological civilization construction, energy revolution, and low-carbon economic development. Henan province is one of the largest agricultural and pasturage provinces in China. Based on the analysis of the status and trends of Henan's biomass energy (BE) development, this paper summarizes the present status of the construction of ecological civilization (CEC) and the factors restricting its development. Challenges in developing biomass energy are analyzed systematically, and strategies and key technical directions for future biomass energy development are discussed. Finally, the paper presents countermeasures and suggestions for CEC based on the development of BE, which will vigorously promote the development and utilization of BE and the process of CEC. This research provides a reference for the further development of BE and CEC in the future. [ABSTRACT FROM AUTHOR]

In recent years, global environmental problems such as air pollution and the greenhouse effect have become more and more serious. The utilization of biomass energy not only can promote low-carbon transformation to establish a competitive advantage through value creation under the goals of carbon peaking and carbon neutrality but is also an important force in solving environmental problems. Government subsidy policies play an important role in promoting the development of biomass energy utilization. Taking straw as an example, this paper constructs a straw recycling supply chain system dynamics model consisting of farmers, acquisition stations, power plants, and pyrolysis plants based on a real-world case. Two types of straw processing, namely power generation and pyrolysis, are considered in the model. This paper analyzes the economic and environmental impacts of three subsidy policies, namely the unified rate policy, the linear growth policy, and a two-step policy, by comparing the profit, carbon, and pollution emission reduction benefits of the supply chain under different subsidy scenarios. The result shows that, among the three subsidy policies, the unified rate policy shows the best-promoting effect. The research results and policy implications in this paper could be a reference for governments trying to formulate subsidy policies for developing biomass energy utilization. [ABSTRACT FROM AUTHOR]

Hydrothermal carbonization (HTC) is one of the thermochemical processes commonly used to convert raw biomass into hydrochar, a valuable solid carbonaceous product. Waste biomasses such as forestry residues, agricultural wastes and sewage sludges have drawn considerable interests as hydrochar feedstocks. These materials are regarded as economically sustainable material and their usage provides an effective solution to waste management concerns. The carbonization procedure is accomplished using water as a reaction medium at temperatures between 150 and 300 °C and pressure up to 20 bar. Typically, the biomass transformation process is completed using a carbonization time ranging from several minutes to several hours. In addition to the HTC temperature and carbonization time, the impact of biomass feedstocks utilized on the hydrochar properties and fuel/combustion performance dictated their potential applications as solid fuel and carbon materials. This paper provides a brief commentary on recent studies involving the main biomass wastes transformation using the HTC approach. The impact of raw biomass quality on the resulting hydrochar properties is highlighted and combustion behaviour/performance are compared and discussed. [ABSTRACT FROM AUTHOR]

Ecofuels and their feedstock come in three main product classes: electrofuels (e-Fuels), biofuels, and non-biowaste-derived fuels. Ecofuels originate from non-fossil sources, derived from circular raw materials such as non-food organic waste, renewable hydrogen, and captured CO2 through a rapid process of carbon fixation. Proposed regulation drafts under discussion indicate that new fuels would need to reach a substantial degree of climate neutrality. The manufacture of all ecofuels, however, requires energy input to accomplish the conversion of the initial feedstock; their climate neutrality claims stem from the use of renewable electric energy and/or biomasses in the production process, but fossil fuels are still the main primary sources of global (and the EU's) electric power, and most biofuels consumed in the EU transport mix are still crop-based, with potential conflicts with food and land use. Furthermore, entirely neglecting GHG emissions from renewable energy generation is scientifically debatable, as the impact of the energy (and the related GHG emissions) embedded in the materials used to build renewable energy facilities is small, but not nil. The paper reports ecofuel trends according to the above-mentioned originating technologies and discusses the issues related to their development. [ABSTRACT FROM AUTHOR]

Ion chromatography and related techniques have been the most popular separation methods used in the determination of organic and inorganic anions and cations, predominantly in water and wastewater samples. Making progress in their development and introducing new stationary phases, methods of detection and preparation of samples for analyses have given rise to the broadening of their analytical range. Nowadays, they are also used for substances that are not ionic by nature but can convert to such forms under certain conditions. These encompass, among others, carbohydrates, whose role and significance in humans' lives and environment is invaluable. Their presence in the air is mostly due to the industrial burning of biomass for energy production purposes. In addition, the content of sugars in plants, fruits and vegetables, constituting the base of human diets, affects our health condition. Given that, there is not only a need for their determination by means of routine methods but also for searching for novel analytical solutions. Based on literature data from the past decade, this paper presents the possibilities and examples of applications regarding ion chromatography and related techniques for the determination of carbohydrates in environmental samples, biomass and plants constituting food or raw materials for food production. Attention has been paid to the virtues and limitations of the discussed separation methods in this respect. Moreover, perspectives on their development have been defined. [ABSTRACT FROM AUTHOR]

This paper reports the first study of phyco-remediation of cyantraniliprole, a second-generation diamide insecticide with high toxicity and persistence in aquatic environments, using the green microalga Chlamydomonas reinhardtii. Cultures of C. reinhardtii were treated with four concentrations of cyantraniliprole (0, 25, 50, and 100 ppm). The removal efficiency, antioxidant responses, and biomass composition of the microalga were measured after 1 h and one week of exposures. C. reinhardtii was able to remove cyantraniliprole from the medium by biodegradation, biotransformation, bioaccumulation, and bio-adsorption mechanisms, achieving up to 87.0% removal within 1 h and 84.5% after one week. The microalga also maintained acceptable levels of enzymatic and nonenzymatic antioxidants, indicating its tolerance to cyantraniliprole stress. Moreover, some treated cultures (especially those with 25 and 50 ppm cyantraniliprole) showed enhanced specific growth rate, and biomass productivity compared to control cultures. In addition, those with 50 and 100 ppm cyantraniliprole showed enhanced carbohydrate and lipid concentrations compared to the control cultures. These results suggest that C. reinhardtii is a promising candidate for bioremediation of cyantraniliprole-contaminated water and biofuel production. [ABSTRACT FROM AUTHOR]

As climate change intensifies and the need to reduce human-caused emissions becomes more urgent, transitioning to a bio-based economy is essential. This paper explores the diverse industrial applications of plant oils as sustainable alternatives to petroleumbased products, including their use in food, polymers, lubricants, surfactants, pesticides, emollients, and biofuels. This review delves into biosynthetic pathways, detailing the key enzymes and processes involved in the synthesis of triacylglycerol. It thoroughly discusses how genetic and metabolic engineering can not only increase oil yields but also modify fatty acid compositions to better meet industrial requirements. By understanding genetics and utilizing advanced biotechnologies, the oil content and quality of plant sources can be significantly enhanced, aligning with both sustainability goals and industrial demands. This paper provides a comprehensive overview of the current uses and genetic engineering of plant oil production, proposing innovative strategies such as utilizing oils from biomass or cultivating non-edible oil crops. These approaches aim to establish a sustainable industrial system, reduce reliance on fossil fuels, and promote the growth of an environmentally responsible biobased economy. Additionally, the review highlights future directions, examining the economic implications and environmental benefits of adopting plant oils across various sectors and positioning them as pivotal to achieving an eco-friendly, bio-based economy. [ABSTRACT FROM AUTHOR]

Nowadays, Energy has become one of the most important issues. Negative environmental effects of fossil fuels lead countries to use renewable and sustainable energy sources day by day. In addition, energy supply and security have been an motivator factor in this field. This study focus on biomass that renewable and sustainable energy source. According to studies in literature, energy production from biomass resource less than other energy sources. The most important reason for this is the logistics costs. Therefore, biomass supply chain optimization is an important issue. In this study, mathematical models of biomass supply chain are reviewed. When the studies are evaluated, there are three approaches in modeling biomass supply chains. These approaches are as follows: 1) Collection and Distirubiton, 2) Selection, 3) Clustering. In additon, researchers generally focus on single-aim mixed integer mathematical models. However, recently, it is seen that there are multi-aim models in the literature for minimizing emissions as well as supply chain costs. In this study, general information about biomass and biomass supply chain, studies of in this area, mathematical models, details of published papers are given. Objective functions, cost/income items, methods of these models are discussed in detail. [ABSTRACT FROM AUTHOR]

Energy (including thermal) needs are growing rapidly worldwide thus leading to increased energy production. Considering stricter requirements for the employment of non-renewable energy sources, the use of biofuel in energy facilities appears as one of the best options, having high potential for growth that will increase in the long run both in the Baltic region and the European Union as a whole. This publication investigates the possibilities of using various blends of biofuel containing lignin for heat production and emissions to the air during combustion processes. The paper examines the chemical composition of lignin and bottom ash and explores the impact of a different ratio of lignin in the fuel mixture, the effect of the power of biofuel combustion plants (boilers) and the influence of fuel supply to the combustion chamber on gaseous pollutants (CO, NOx, SO2) and particulate matter emissions. The results of the conducted study demonstrate that, in contrast to pure lignin, the concentrations of alkali metals, boron and, to a lesser extent, nickel and chlorine have increased the most in bottom ash. The use of lignin can effectively reduce the need for conventional biofuel by 30–100% and to increase the temperature of exhaust gases. The lowest emissions have been observed using a mixture of 30% of lignin and biofuel at the lowest range of power (2.5–4 MW). Under the optimal oxygen/temperature mode, carbon monoxide concentrations are approximately 20 mg/Nm3 and those of nitrogen oxides–500 mg/Nm3. Particulate matter emissions reach 150 mg/Nm3, and hence applying air treatment equipment is required. [ABSTRACT FROM AUTHOR]

Forests are a potentially carbon-negative energy source and function as carbon sinks. However, both of these functions have become threatened significantly by spruce bark beetle infestation in Czechia. This paper assesses how this ecological issue may affect the future energy mix, and in the process, affect carbon emission reduction targets and the available share of renewable energy sources (RESs). We assess several forest development scenarios with three policy incentives: subsidising wood pellet production, striving for climate neutrality, and adhering to ecological constraints. We build a spatially enriched energy system model, TIMES-CZ, based on Eurostat's NUTS3 regions. We find that the spruce bark beetle infestation may not exert a lasting influence on overall decarbonisation pathways, the energy mix, or system-wide costs in any forest scenario. The RESs share is affected only until 2030, and the effect is minimal, at <1.5 percentage points. Nevertheless, Czechia's RES contribution is far below the 45% 2030 EU target. Subsidising wood pellet production is a costly transition that does not contribute to meeting the target. Limiting forest biomass availability and adhering to ecological constraints increase the overall system costs and worsen the chances of meeting decarbonisation targets. [ABSTRACT FROM AUTHOR]

The fast depletion of fossil fuels and growing concerns about environmental sustainability have increased interest in using biomass as a renewable energy source. Fast pyrolysis, a thermochemical conversion process, has emerged as a promising technique for converting biomass into valuable biofuels and bio-based chemicals. The aim of this literature review is to comprehensively analyze recent advances in biomass fast pyrolysis, focusing on the principles, process parameters, product yields, and potential applications of biomass fast pyrolysis. This comprehensive review, based on an in-depth analysis of 61 scientific papers and 4 patents, provides an overview of various biomass technologies (combustion, gasification, pyrolysis) used for biofuel production. It focuses on the principles, benefits and applications of these technologies and serves as a valuable resource for researchers, engineers and policy makers. Based on the wealth of information from rigorously selected sources, we explore the key process parameters and reactor types associated with each technology, providing insight into its efficiency and product composition. [ABSTRACT FROM AUTHOR]

Seaweed is a promising marine macroalgae of the millennium, providing various ecological, social, and economic benefits. At present, seaweed production reached 35.8 million t from farming, accounting for 97% of global seaweed output, with a world market of US$ 11.8 billion. Seaweeds are an excellent source of nutritious human food because of their low lipid content, high minerals, fibers, polyunsaturated fatty acids, polysaccharides, vitamins, and bioactive compounds. Many seaweed sub-products offer unique properties to develop various functional foods for the food processing industries. In the perspective of climate change mitigation, seaweed farms absorb carbon, serve as a CO2 sink and reduce agricultural emissions by providing raw materials for biofuel production and livestock feed. Seaweed farming system also helps in climate change adaptation by absorbing wave energy, safeguarding shorelines, raising the pH of the surrounding water, and oxygenating the waters to minimize the impacts of ocean acidification and hypoxia on a localized scale. Moreover, it contributes substantially to the sustainable development of the economic condition of coastal women by providing livelihood opportunities and ensuring financial solvency. This review paper highlights the significance of seaweed farming in global food and nutritional security, mitigation and adaptation to global climate change, and women empowerment within a single frame. This review paper also outlined the major issues and challenges of seaweed farming for obtaining maximum benefits in these aspects. The main challenges of making seaweed as a staple diet to millions of people include producing suitable species of seaweeds, making seaweed products accessible, affordable, nutritionally balanced, and attractive to the consumers. Various food products must be developed from seaweeds that may be considered equivalent to the foods consumed by humans today. Lack of effective marine spatial planning to avoid user conflicts is vital for expanding the seaweed farming systems to provide aquatic foods and contribute globally for mitigation and adaptation of climate change impacts. Hence, women's empowerment through seaweed farming is primarily constrained by the lack of technical knowledge and financial resources to establish the coastal farming system. All the information discussed in this paper will help to understand the critical needs for large-scale seaweed farming for climate resilience mariculture, potentials for global food security, and future research on various aspects of seaweed farming and their diverse utilization. [ABSTRACT FROM AUTHOR]

The European Union has recommended that about 10–50% of the global energy requirement should be supplemented by waste biomass resources by 2050 in order to achieve the objective of having net-zero-emission economies. This has led to intensive research being conducted on developing appropriate biofuel production technologies using advanced or integrated systems to tackle local, national, and global energy challenges using waste feedstock. Researchers have realized the potential of microbes (e.g., yeast strains) for bioenergy production. For this paper, both non-oleaginous and oleaginous yeasts were reviewed, with a specific focus being placed on their diversity in metabolism and tolerance to the various challenges that arise from the use of waste feedstock and influence bioprocessing. Gathering in-depth knowledge and information on yeast metabolism has paved the way for newer and better technologies to employ them for consolidated biorefineries to not only produce biofuels but also to cut down process expenses and decrease the risks of net carbon emissions. The rationale for using yeast strains improved by metabolic engineering and genetic manipulation that can substantially meet the challenges of alternate fuel resources is also described in this paper. This literature review presents the advantages and disadvantages of yeast-based biofuel production and highlights the advancements in technologies and how they contrast to conventional methods. Over the last decade, scientific publications have endorsed the idea of biorefineries for environmentally friendly, cost-effective, and sustainable biofuel production. [ABSTRACT FROM AUTHOR]

The supply logistics of energy biomasses generally involves a complex system of supply chains, which aim to achieve timely and cost-efficient feedstock deliveries to biomass demand points. The performance of supply chains is often examined in case studies where spatial data about biomass sources and transportation networks are deployed in varying resolutions and to different geographical extents. In this paper, we have reviewed 94 publications, in which spatial data were used in case studies that focused on analysing and optimising energy biomass supply chains. The reviewed publications were classified into 16 categories, according to the publication year, study methods and objectives, biomass types, supply system complexity and the spatial features of each study area. This review found that the use of geographical information systems in this context has increased in popularity in recent years, and that and the multiformity of the applied methods, study objectives and data sources have increased simultaneously. Another finding was that most of the studies that we reviewed focused on countries in which spatial biomass and transport network data of high quality were unrestrictedly available. Nevertheless, case studies, including spatial data from multiple countries, were represented marginally in the papers that we reviewed. In this paper we also argue that a standard way of reporting geographical contents in biomass case studies should be developed to improve the comprehension and reproducibility of the publications in this field of research. [ABSTRACT FROM AUTHOR]

Environmental pollution caused by marine engines fueled with fossil fuels is a matter of growing significance. The search for renewable and clean energy sources and improvements in the way fossil fuels are burnt aims to reduce the environmental impact of these engines. For this purpose, fatty acid methyl esters were produced from pure canola oil using KOH-assisted methanol-based transesterification with a maximum yield of 90.68 ± 1.6%. The marine engine's model was created with CONVERGE software, followed by experimental verification. This paper examines the blended fuel characteristics of a diesel engine with biodiesel blends (0%, 5%, 10%, and 15%) at different loads of engines (50%, 75%, and 100%). It also explores the variation in these characteristics of B10 (10% biodiesel–diesel blends) at three different load conditions and four different EGR rates (0%, 5%, 10%, and 15%). The results indicate that the addition of biodiesel to diesel fuel reduces CO, HC, and soot emissions, while increasing NOx emissions. Additionally, the EGR rate decreases NOx emissions but results in higher levels of soot, CO, and HC emissions. Finally, response surface methodology was used to elicit the engine's characteristics. It was determined that the optimum experimental operating conditions were 100% engine load, 6.9% biodiesel addition, and 7.7% EGR. The corresponding BTE, BSFC, NOx, and HC emissions were 38.15%, 282.62 g/(kW-h), 274.38 ppm, and 410.37 ppm, respectively. [ABSTRACT FROM AUTHOR]

Τhis paper proposed a sustainable treatment scheme for effluents from fruit and vegetable processing industries with high organic load that combined heterotrophic microalgae cultivation with microalgae spray drying producing end-products of commercial interest (biofertilisers and/or animal feed). A pilot plant was operated with feedstock from a fruit and vegetable processing industry and its final products were assessed. The pilot plant was powered by renewable energy (solar energy supported by biomass), which minimized the carbon footprint and operating costs of the process. Through the ultimate analysis of the produced algae, it was evident that in all cases it could be commercialized as a solid NPK organic fertilizer being in line with the respective EU and Spanish legislation framework. As far as the animal feed perspective is concerned, the end-product of the pilot plant could be efficiently included in the feed of various animals, substituting a significant part of the animal feed required. The results from the implementation were used for the design of a full-scale implementation of the innovative treatment scheme, proving that 1.26 ton/d of microalgae could be produced, which could be later used as fertiliser and/or animal feed from the daily wastewater production of a medium sized fruit and vegetable processing company. From an environmental perspective, the proposed solution provides a gold standard example of the circular economy concept, since 1.15 kg CO2 equivalent per kg of sludge avoided could be saved. Additionally, the use of renewable energy (solar and biomass) will result in a saving of 0.531 kg of CO2 emissions per kWh consumed. Conclusively, the proposed treatment scheme could meet circularity and sustainability since the end-products quality permits their integration into new value chains. [ABSTRACT FROM AUTHOR]

Vietnam, a country in Southeast Asia, is anticipated to experience an increase in energy consumption due to the growth of its manufacturing and industrial sectors, which aims to establish Vietnam as the world's new production hub. Fossil fuels, which are ecologically unfriendly and quickly running out, are now Vietnam's primary energy source. Due to the detrimental effects of fossil fuels on the environment, we can apply strategic decision-making in the industrial sector to choose the best alternative for a renewable energy resource (RER). RERs such as solar energy, wind energy, solid waste energy, biomass energy, geothermal energy, biofuel energy, and hydropower energy are important for generating energy and will be crucial for the survival of humanity, the planet, and other living things in the future. The actions of RER-based industrial development must be encouraged since they will make a significant contribution to overcome environmental impact limitations. The 2-tuple linguistic q -rung orthopair fuzzy set (2TL q -ROFS) is a novel development in fuzzy set theory that presents a decision-making method for selecting the most appropriate alternative. In this paper, we develop a family of the 2TL q -ROF Maclaurin symmetric mean aggregation operators such as the 2TL q -ROF Maclaurin symmetric mean (2TL q -ROFMSM) operator, the 2TL q -ROF dual Maclaurin symmetric mean (2TL q -ROFDMSM) operator and its weighted forms. We also look into a few of the proposed operators' properties and special cases. Then based on 2TL q -ROFS, a new Decision Making Trial and Evaluation Laboratory (DEMATEL) model is constructed, which can use the decision makers' preferences to get the optimum objective weights for attributes. Next, we extend the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method to 2TL q -ROF version which not only covers the uncertainty of human cognition but also gives decision makers a larger space to represent their decisions. Utilizing this model the best RER for Vietnam is selected. The outcomes of the hybrid 2TL q -ROF-DEMATEL-TOPSIS method reveal that among the energy resources, hydropower energy ranked highest, followed by biofuel energy. [ABSTRACT FROM AUTHOR]

Background: In addition to the other uses for macroalgae, since the 1970s, there has been interest in using macroalgae as a source of biofuels, due to the high rates of productivity and intrinsic advantages over other biofuel crops such as not requiring land use or significant freshwater input. A wide range of conversion processes exist but anaerobic digestion was one of the first demonstrated and is still a widely proposed conversion pathway. To be economically viable and scalable within Europe, the industry will need to be based on a small number of fast growing, high-yielding European macroalgae species. There is a wide body of scientific work on the conversion of seaweeds to biofuel via anaerobic digestion. Main text: These studies demonstrate that the efficiency of this conversion pathway is highly variable between species, processing techniques, composition and digestor conditions. In this paper, we review this body of work specifically linking it to candidate species for European macroalgae bio-energy cultivation with the aim to promote the future development of the European macroalgal cultivation sector and allow for a better alignment with the requirements for biofuel production from macroalgae. Conclusions: Overall, anaerobic digestion of seaweed offers opportunities for large-scale energy production which avoids some of the issues that have faced previous generations of biofuels, but there are a number of key challenges to overcome to ensure wider adoption and economic viability. (1) Optimising the biomass production to ensure an economic and uniform feedstock with the composition optimised to increase desirable characteristics such as sugar content and the carbon and nitrogen ratio and to reduce inhibitory factors such as halogenated secondary metabolites, sulphur and heavy metals. (2) Improving conversion rates through co-digestion, pre-treatments and tailored microbial communities, using scalable and economically feasible technology. (3) Developing tailored microbial communities capable of utilising the diverse polysaccharides in seaweed feedstock and being tolerant of the saline conditions associated with them. Addressing these issues will deliver significant benefits towards the development of a bio-energy industry based on the anaerobic digestion of cultured seaweeds. [ABSTRACT FROM AUTHOR]

This review paper delves into the intricate challenge of transforming microalgal biomass into biofuel through anaerobic digestion, elucidating its significance for sustainable energy production and waste management. Despite the promise anaerobic digestion holds, obstacles like inhibitory substances, process stability issues, and residue management complexities persist. Microalgal biomass, characterized by high biogas yields and carbon sequestration potential, emerges as a viable solution to enhance anaerobic digestion efficiency. Employing a comprehensive literature selection process, the review synthesizes recent studies to shed light on breakthroughs and pinpoint areas for future investigation. Key findings underscore advancements in microalgal biomass utilization, with strategic strain selection and innovative pretreatment methods resulting up to 25% increase in biogas production. Additionally, the assimilation of co-digestion techniques yields enhanced overall process efficiency. Microalgal biomass demonstrates remarkable carbon sequestration capabilities, sequestering up to 60% of CO2 during the anaerobic digestion process. Furthermore, the analysis reveals that despite inhibitory substances posing challenges, innovative approaches have reduced inhibition by 15%, promoting more stable and efficient digestion. Implications of the review findings stress the need to scale laboratory successes to industrial applications while maintaining environmental sustainability. Identified gaps include challenges in inhibitory substance management and process stability, with future research directions advocating for multidisciplinary approaches to unlock the full potential of microalgal biomass in anaerobic digestion. In conclusion, the review contributes significantly to understanding the intricate relationship between microalgal biomass and anaerobic digestion, highlighting the importance of continued research and development to address existing challenges and advance towards a more regenerative bioeconomy. [ABSTRACT FROM AUTHOR]