Search

The EFSA Panel on Food Additives and Flavourings (FAF) provides a scientific opinion on the safety of curdlan as a new food additive used as firming and gelling agent, stabiliser, thickener. Curdlan is a high molecular weight polysaccharide consisting of β‐1,3‐linked glucose units, produced by fermentation from Rhizobium radiobacter biovar 1 strain NTK‐u. The toxicological dataset consisted of sub‐chronic, chronic and carcinogenicity, reproductive and developmental toxicity studies as well as genotoxicity. In vivo data showed that curdlan is not absorbed as such but is extensively metabolised by the gut microbiota into CO2 and other innocuous compounds. Curdlan was not genotoxic and was well‐tolerated with no overt organ‐specific toxicity. Effects observed at very high doses of curdlan, such as decreased growth and increased cecum weight, are common for indigestible bulking compounds and therefore considered physiological responses. In a combined three‐generation reproductive and developmental toxicity study, decreased pup weight was observed during lactation at 7500 mg curdlan/kg body weight (bw) per day, the highest dose tested. The Panel considered the observed effects as treatment‐related and adverse, although likely secondary to nutritional imbalance and identified a conservative no observed adverse effect level (NOAEL) of 2500 mg/kg bw per day. Despite the limitations noted in the dataset, the Panel was able to conclude applying the margin of exposure (MOE) approach. Given that curdlan and its break‐down products are not absorbed and that the identified adverse effect is neither systemic nor local, no adjustment factor was deemed necessary. Thus, an MOE of at least 1 was considered sufficient. The highest exposure estimate was 1441 mg/kg bw per day in toddlers at the 95th percentile of the proposed maximum use level exposure assessment scenario. The Panel concluded that there is no safety concern for the use of curdlan as a food additive at the proposed uses and use levels. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings was requested to evaluate 14 flavouring substances assigned to the Flavouring Group Evaluation 80 (FGE.80), using the Procedure as outlined in the Commission Regulation (EC) No 1565/2000. Thirteen substances have already been considered in FGE.80 and its revision and in FGE.96 [FL‐no: 10.005, 10.024, 10.025, 10.050, 10.061, 10.069, 10.070, 10.072, 10.169, 13.009, 13.012, 13.161 and 16.055]. The remaining flavouring substance 3a,4,5,7a‐tetrahydro‐3,6‐dimethylbenzofuran‐2(3H)‐one [FL‐no: 10.057] has been cleared with respect to genotoxicity in FGE.217Rev3 and it is considered in this revision 2 of FGE.80. The substance [FL‐no: 10.057] was evaluated through a stepwise approach that integrates information on the structure–activity relationships, intake from current uses, threshold of toxicological concern (TTC) and available data on metabolism and toxicity. The Panel concluded that [FL‐no: 10.057] does not give rise to safety concerns at its levels of dietary intake, when estimated on the basis of the 'Maximised Survey‐derived Daily Intake' (MSDI) approach. Besides the safety assessment of the flavouring substance, the specifications for the material of commerce have also been considered and the information provided was complete for [FL‐no: 10.057]. However, for the flavouring substance [FL‐no: 10.057] in the present revision and for eight substances evaluated in previous revisions, the 'modified Theoretical Added Maximum Daily Intakes' (mTAMDIs) values are above the TTC for their structural class (III). For four substances previously evaluated in FGE.80Rev1 and in FGE.96, use levels are still needed to calculate the mTAMDI estimates. Therefore, in total for 13 flavouring substances, data on uses and use levels should be provided to finalise their safety evaluations. For [FL‐no: 10.050, 10.069 and 13.161], information on the composition of stereoisomeric mixtures is needed. [ABSTRACT FROM AUTHOR]

The present opinion deals with the re‐evaluation of shellac (E 904) when used as a food additive and with the new application on the extension of use of shellac (E 904) in dietary foods for special medical purposes. The Panel derived an acceptable daily intake (ADI) of 4 mg/kg body weight (bw) per day for wax‐free shellac (E 904) produced by physical decolouring, based on a NOAEL of 400 mg/kg bw per day and applying an uncertainty factor of 100. The Panel concluded that the ADI of 4 mg/kg bw per day should be considered temporary for wax‐free shellac (E 904) produced by chemical bleaching, while new data are generated on the identity and levels of the organochlorine impurities in E 904. This ADI is not applicable for wax‐containing shellac as a food additive. For several age groups, the ADI was exceeded at the 95th percentile in the non‐brand‐loyal exposure assessment scenario and maximum level exposure assessment scenario. Considering the low exceedance and the fact that both the exposure estimation and the toxicological evaluation of shellac were conservative, the panel concluded that the calculated exceedance of the ADI does not indicate a safety concern. The Panel recommended to the European Commission separating specifications for E 904 depending on the manufacturing process, chemical bleaching and physical decolouring, because they result in different impurities; revising the definition of the food additive to include a description of each manufacturing process; deleting information on wax‐containing shellac from the EU specifications; revising the acid value for wax‐free shellac produced by chemical bleaching; lowering the maximum limit for lead; to consider introducing limits for other toxic elements potentially present in shellac; including a maximum limit for chloroform and total inorganic chloride in the EU specification for shellac produced by chemical bleaching. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additive and Flavourings (FAF Panel) provides a scientific opinion on the safety of soy leghemoglobin from genetically modified Komagataella phaffii as a food additive in accordance with Regulation (EC) No 1331/2008. The proposed food additive, LegH Prep, is intended to be used as a colour in meat analogue products. The yeast Komagataella phaffii strain MXY0541 has been genetically modified to produce soy leghemoglobin; the safety of the genetic modification is under assessment by the EFSA GMO Panel (EFSA‐GMO‐NL‐2019‐162). The amount of haem iron provided by soy leghemoglobin from its proposed uses in meat analogue products is comparable to that provided by similar amounts of different types of meat. The exposure to iron from the proposed food additive, both at the mean and 95th percentile exposure, will be below the 'safe levels of intake' established by the NDA Panel for all population groups. Considering that the components of the proposed food additive will be digested to small peptide, amino acids and haem B; the recipient (non GM) strain qualifies for qualified presumption of safety status; no genotoxicity concern has been identified and no adverse effects have been identified at the highest dose tested in the available toxicological studies, the Panel concluded that there was no need to set a numerical acceptable daily intake (ADI) and that the food additive does not raise a safety concern at the proposed use in food category 12.9 and maximum use level. The Panel concluded that the use of soy leghemoglobin from genetically modified Komagataella phaffii MXY0541 as a new food additive does not raise a safety concern at the proposed use and use level. This safety evaluation of the proposed food additive remains provisional subject to the ongoing safety assessment of the genetic modification of the production strain by the GMO Panel (EFSA‐GMO‐NL‐2019‐162). [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of 2‐methyl‐1‐(2‐(5‐(p‐tolyl)‐1H‐imidazol‐2‐yl)piperidin‐1‐yl)butan‐1‐one [FL‐no: 16.134] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. The substance has not been reported to occur naturally and is chemically synthesised. In food, it is intended to be used as a flavouring substance only in chewing gum. The chronic dietary exposure to [FL‐no: 16.134] was estimated to be 45 μg/person per day for a 60‐kg adult and 28.4 μg/person per day for a 15‐kg 3‐year‐old child. [FL‐no: 16.134] did not show genotoxicity in a bacterial reverse mutation test and an in vitro mammalian cell micronucleus assay. Based on the submitted toxicokinetic and metabolism data, it can be predicted that the flavouring substance is metabolised to innocuous products only. The Panel derived a lower confidence limit of the benchmark dose (BMDL) of 0.71 mg/kg bw per day for a 20% increase in the relative thyroid (including parathyroid) weight observed in a 90‐day toxicity study in rats. Based on this BMDL, adequate margins of exposure of 887 and 374 could be calculated for adults and children, respectively. The Panel concluded that there is no safety concern for [FL‐no: 16.134], when used as a flavouring substance at the estimated level of dietary exposure, based on the intended use and use levels as specified in Appendix B. The Panel further concluded that the combined exposure to [FL‐no: 16.134] from its use as a food flavouring substance and from its presence in toothpaste and mouthwash is also not of safety concern. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of naringenin [FL‐no: 16.132] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. No other substances with sufficient structural similarity have been identified in existing FGEs that could be used to support a read‐across approach. The information provided on the manufacturing process, the composition and the stability of [FL‐no: 16.132] was considered sufficient. From studies carried out with naringenin, the Panel concluded that there is no concern with respect to genotoxicity. The use of naringenin as a flavouring substance at added portions exposure technique (APET) exposure levels is unlikely to pose a risk for drug interaction. For the toxicological evaluation of naringenin, the Panel requested an extended one‐generation toxicity study on naringenin, in line with the requirements of the Procedure and to investigate the consequence of a possible endocrine‐disrupting activity. The Panel considered that changes in thymus weight, litter size, post‐implantation loss and a consistent reduced pup weight in the high‐dose F2 generation could not be dismissed and selected therefore, the mid‐dose of 1320 mg/kg body weight (bw) per day for the parental males as the no observed adverse effect level (NOAEL) of the study. The exposure estimates for [FL‐no: 16.132] (31,500 and 50,000 μg/person per day for children and adults, respectively) were above the threshold of toxicological of concern (TTC) for its structural class (III). Using the NOAEL of 1320 mg/kg bw per day at step A4 of the procedure, margins of exposure (MoE) of 1590 and 630 could be calculated for adults and children, respectively. Based on the calculated MoEs, the Panel concluded that the use of naringenin as a flavouring substance does not raise a safety concern. [ABSTRACT FROM AUTHOR]

Quillaia extract (E 999) was re‐evaluated in 2019 by the EFSA Panel on Food Additives and Flavourings (FAF). EFSA derived an acceptable daily intake (ADI) of 3 mg saponins/kg bw per day for E 999. Following a European Commission call for data to submit data to fill the data gaps, the present follow‐up opinion assesses data provided by interested business operators (IBOs) to support an amendment of the EU specifications for E 999. Additionally, this opinion deals with the assessment of the proposed extension of use for E 999 in food supplements supplied in a solid and liquid form, excluding food supplements for infants and young children and, as a carrier in botanical nutrients. The Panel concluded that the proposed extension of use, if authorised, could result in an exceedance of the ADI at the maximum of the ranges of the mean for children, adolescents and the elderly, and for all populations at the 95th percentile. An additional proposed extension of use for E 999 to be used as a carrier for glazing agents on entire fresh fruits and vegetables has been received. Since no information on the proposed use levels of E 999 on a saponins content basis has been provided by this applicant, the Panel was not able to evaluate the safety of this extension of use. Considering the technical data submitted, the Panel recommended some modifications of the existing EU specifications for E 999, mainly to lower the limits for lead, mercury and arsenic and to include a maximum limit for cadmium and for calcium oxalate. The Panel also recommended that the limits would be expressed on a saponins basis. The Panel proposed to revise the definition of E 999 to better describe the composition in a qualitative way. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of synthesised DNA oligonucleotides as a new food additive, in accordance with Regulation (EC) No 1331/2008. Considering that the additional information requested by the Panel during the risk assessment was not provided by the applicant, the assessment was concluded on the basis of the sole information available in the application. The proposed food additive consists of purified synthetic DNA sequences intended to be used for traceability purposes, alone or combined with carriers. Information provided by the applicant on the identity, characterisation and production process of the proposed food additive was considered insufficient. The Panel considered that the product specifications as proposed by the applicant do not adequately define and characterise the proposed food additive. The applicant proposed for the food additive the maximum use levels of 0.001 mg/kg for a variety of food categories. The food additive was also proposed as a Group I additive at a specific maximum level of quantum satis. The applicant did not provide exposure estimates according to the EFSA ANS Panel guidance (2012). No biological or toxicological data were provided by the applicant for the proposed food additive. Considering the inadequate information available and the uncertainty introduced by the proposal at quantum satis, along with the insufficient specifications, the Panel could not conclude on the safety of the food additive as proposed and described by the applicant. [ABSTRACT FROM AUTHOR]

This opinion addresses the re‐evaluation of erythritol (E 968) as food additive and an application for its exemption from the laxative warning label requirement as established under Regulation (EU) No 1169/2011. Erythritol is a polyol obtained by fermentation with Moniliella pollinis BC or Moniliella megachiliensis KW3‐6, followed by purifications and drying. Erythritol is readily and dose‐dependently absorbed in humans and can be metabolised to erythronate to a small extent. Erythritol is then excreted unchanged in the urine. It does not raise concerns regarding genotoxicity. The dataset evaluated consisted of human interventional studies. The Panel considered that erythritol has the potential to cause diarrhoea in humans, which was considered adverse because its potential association with electrolyte and water imbalance. The lower bound of the range of no observed adverse effect levels (NOAELs) for diarrhoea of 0.5 g/kg body weight (bw) was identified as reference point. The Panel considered appropriate to set a numerical acceptable daily intake (ADI) at the level of the reference point. An ADI of 0.5 g/kg bw per day was considered by the Panel to be protective for the immediate laxative effect as well as potential chronic effects, secondary to diarrhoea. The highest mean and 95th percentile chronic exposure was in children (742 mg/kg bw per day) and adolescents (1532 mg/kg bw per day). Acute exposure was maximally 3531 mg/kg bw per meal for children at the 99th percentile. Overall, the Panel considered both dietary exposure assessments an overestimation. The Panel concluded that the exposure estimates for both acute and chronic dietary exposure to erythritol (E 968) were above the ADI, indicating that individuals with high intake may be at risk of experiencing adverse effects after single and repeated exposure. Concerning the new application, the Panel concluded that the available data do not support the proposal for exemption. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additive and Flavourings (FAF Panel) provides a scientific opinion on the safety of a new process to produce steviol glycosides by fermentation of simple sugars using a genetically modified strain of Yarrowia lipolytica (named Y. lipolytica VRM). The manufacturing process may result in impurities different from those that may be present in the other steviol glycosides E 960a‐d, therefore the Panel concluded that separate specifications are required for the food additive produced as described in the current application. Viable cells and DNA from the production strain are not present in the final product. The Panel considered that the demonstration of the absence of kaurenoic acid in the proposed food additive, using a method with a limit of detection (LOD) of 0.3 mg/kg, is adequate to dispel the concerns for potential genotoxicity. Given that all steviol glycosides follow the same metabolic pathways, the Panel considered that the current steviol glycosides would fall within the same group of substances. Therefore, the Panel considered that the already existing data on rebaudioside M and structurally related steviol glycosides are sufficient, and a similar metabolic fate and toxicity is expected for the food additive. The results from the bacterial reverse mutation assay and the in vitro micronucleus assay were negative and indicated absence of genotoxicity from the food additive. The existing acceptable daily intake (ADI) of 4 mg/kg body weight (bw) per day, expressed as steviol equivalents, was considered to be applicable to the proposed food additive. The Panel concluded that there is no safety concern for steviol glycosides, predominantly Rebaudioside M, produced by fermentation using Y. lipolytica VRM, to be used as a food additive at the proposed uses and use levels. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmokEz Enviro‐23 (SF‐006), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmokEz Enviro‐23 is obtained by pyrolysis of oak, maple, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 3.2 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 9.5 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan‐2(5H)‐one and benzene‐1,2‐diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA‐reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Zesti Smoke Code 10 (SF‐002), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Zesti Smoke Code 10 is obtained by pyrolysis of hickory and oak woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.02 to 4.6 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 13.0 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan‐2(5H)‐one and benzene‐1,2‐diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA‐reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Fumokomp (SF‐009), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003 (in the renewal application the Primary Product is reported as 'Fumokomp Conc.'). This opinion refers to an assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Fumokomp Conc. is produced by pyrolysis of beech and hornbeam woods. Gas chromatography–mass spectrometry (GC–MS) was applied for both identification and quantification of the volatile constituents of the Primary Product. Given the limitations of the method, the Panel cannot judge with confidence whether the applied method meets the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. Moreover, the Panel concluded that the absence of furan‐2(5H)‐one from the Primary Product was not convincingly demonstrated. At the maximum proposed use levels, dietary exposure estimates calculated with FAIM ranged from 0.04 to 0.9 mg/kg body weight (bw) per day at the mean and from 0.1 to 1.5 mg/kg bw per day at the 95th percentile. The information available on the 32 identified components of the Primary Product, although limited, did not indicate a concern for genotoxicity for any of these substances. However, whole mixture testing in an in vitro mouse lymphoma assay gave positive results which would require an adequate in vivo follow‐up study. In addition, the potential for aneugenicity of the Primary Product has not been adequately investigated. Accordingly, the potential safety concern for genotoxicity of the Primary Product cannot be ruled out. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R709 (SF‐008), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R709 is obtained by pyrolysis of beech and oak wood as main source materials. The panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.8 to 12.2 mg/kg body weight (bw) per day at the mean and from 2.3 to 51.4 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan‐2(5H)‐one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the TTC of 0.0025 μg/kg bw per day for DNA‐reactive mutagens and/or carcinogens, the panel concluded that the Primary Product raises concern with respect to genotoxicity. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmoKEz C‐10 (SF‐005), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmoKEz C‐10 is obtained by pyrolysis of maple, oak, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 5.1 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 18.1 mg/kg bw per day at the 95th percentile. The Panel concluded that five components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan‐2(5H)‐one and benzene‐1,2‐diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA‐reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Scansmoke SEF7525 (SF‐004), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Scansmoke SEF7525 is obtained from a tar produced from a mixture of red oak, white oak, maple, beech and hickory. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent‐free fraction amounts to 32.6 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent‐free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with Food Additive Intake Model (FAIM) ranged from 0.6 to 3.8 mg/kg body weight (bw) per day at the mean and from 1.1 to 10.1 mg/kg bw per day at the 95th percentile. Based on the available information on genotoxicity on 44 identified components, the Panel concluded that two substances in the Primary Product, styrene and benzofuran, raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. Considering that the exposure estimates for styrene and benzofuran are above the threshold of toxicological concern (TTC) value of 0.0025 kg/kg bw per day for DNA‐reactive mutagens and/or carcinogens and since further data are needed to clarify their potential genotoxicity, the Panel concluded that the potential safety concern for genotoxicity of the Primary Product cannot be ruled out. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Smoke Concentrate 809045 (SF‐003), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Product Smoke Concentrate 809045 is obtained by pyrolysis of beech wood. The Panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.1 to 1.5 mg/kg body weight (bw) per day at the mean and from 0.2 to 5.2 mg/kg bw per day at the 95th percentile. The Panel concluded that eleven components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan‐2(5H)‐one and benzene‐1,2‐diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA‐reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity. [ABSTRACT FROM AUTHOR]

The Panel on Food Additives and Flavourings of the European Food Safety Authority was requested to evaluate the genotoxic potential of four flavouring substances [FL‐no: 10.023, 10.030, 10.057 and 13.012] from subgroup 4.1 of FGE.19. For three of these substances [FL‐no: 10.023, 10.030 and 13.012], the concern for genotoxicity has been ruled out in previous revisions of Flavouring Group Evaluation 217 (FGE.217). However, in FGE.217Rev2, a concern for genotoxicity could not be ruled out for 3a,4,5,7a‐tetrahydro‐3,6‐dimethylbenzofuran‐2(3H)‐one [FL‐no: 10.057]. After publication of FGE.217Rev2, industry provided additional genotoxicity studies for [FL‐no: 10.057], which are evaluated in the present opinion FGE.217Rev3. The flavouring substance [FL‐no: 10.057] did not induce gene mutations or numerical or structural chromosomal aberrations in vitro. Based on these data, the Panel concluded that the concern for genotoxicity is ruled out for [FL‐no: 10.057]. Consequently, it can be evaluated through the Procedure. [ABSTRACT FROM AUTHOR]

The Panel on Food Additives and Flavourings (FAF) was requested to consider the JECFA evaluations of 28 flavouring substances in the Flavouring Group Evaluation 76 (FGE.76Rev2). Twenty‐one of these substances have been considered in FGE.76Rev1. Seven substances could not be evaluated, because of concerns with respect to genotoxicity. New genotoxicity data have been provided for 4‐methyl‐5‐vinylthiazole [FL‐no: 15.018] and 4,5‐dimethyl‐2‐isobutyl‐3‐thiazoline [FL‐no: 15.032], which are representative substances of [FL‐no: 15.005] and [FL‐no: 15.029, 15.030, 15.130 and 15.131], respectively. The Panel concluded that the concern for genotoxicity is ruled out for [FL‐no: 15.018 and 15.005]. The concerns for gene mutations and clastogenicity are ruled out for [FL‐no: 15.032, 15.029, 15.030, 15.130 and 15.131]. In vitro, [FL‐no: 15.032] induced micronuclei through an aneugenic mode of action. The available in vivo micronucleus study was not adequate to rule out the concern for potential aneugenicity in vivo. The Panel compared the lowest concentration resulting in aneugenicity in vitro with the use levels reported for [FL‐no: 15.032]. Based on this comparison, the Panel concluded that the use of [FL‐no: 15.032] at the maximum reported use levels does not raise a concern for aneugenicity. Based on structural similarity, for the remaining four substances [FL‐no: 15.029, 15.030, 15.130 and 15.131], an aneugenic potential may also be anticipated. Individual genotoxicity data are needed to establish whether they have aneugenic potential. The Panel agrees with JECFA conclusions for 24 flavouring substances 'No safety concern at estimated levels of intake as flavouring substances' when based on the MSDI approach. For six substances, more reliable information on uses and use levels are needed to refine the mTAMDI estimates. For 15 substances, use levels are needed to calculate the mTAMDIs. For [FL‐no: 15.109 and 15.113], information on the actual stereochemical composition is inadequate and the conclusion reached for the named substances cannot be applied to the materials of commerce. [ABSTRACT FROM AUTHOR]

The Panel on Food additives and Flavourings (FAF) was requested to evaluate the flavouring substances 2,4‐dimethyl‐3‐thiazoline [FL‐no: 15.060] and 2‐isobutyl‐3‐thiazoline [FL‐no: 15.119] in Flavouring Group Evaluation 21 revision 6 (FGE.21Rev6). FGE.21Rev6 deals with 41 flavouring substances of which 39 have been already evaluated to be of no safety concern when based on the MSDI approach. For [FL‐no: 15.060 and 15.119], a concern for genotoxicity was raised in FGE.21. Genotoxicity data have been submitted for the supporting substance 4,5‐dimethyl‐2‐isobutyl‐3‐thiazoline [FL‐no: 15.032] evaluated in FGE.76Rev2. The concerns for gene mutations and clastogenicity are ruled out for [FL‐no: 15.032] and for the structurally related substances [FL‐no: 15.060 and 15.119], but not for aneugenicity. Therefore, the aneugenic potential of [FL‐no: 15.060 and 15.119] should be investigated in studies with the individual substances. For [FL‐no: 15.054, 15.055, 15.057, 15.079 and 15.135], (more reliable) information on uses and use levels is needed to (re)calculate the mTAMDIs in order to finalise their evaluation. Provided that information is submitted for [FL‐no: 15.060 and 15.119] with respect to potential aneugenicity, that would allow evaluation of these substances through the Procedure, also for these two substances, more reliable data on uses and use levels would be required. Upon submission of such data, additional data on toxicity may become necessary for all seven substances. For [FL‐no: 15.054, 15.057, 15.079 and 15.135], information on the actual percentages of stereoisomers in the material of commerce based on analytical data should be provided. [ABSTRACT FROM AUTHOR]

Following a request from the European Commission, EFSA developed a new scientific guidance to assist applicants in the preparation of applications for the authorisation of flavourings to be used in or on foods. This guidance applies to applications for a new authorisation as well as for a modification of an existing authorisation of a food flavouring, submitted under Regulation (EC) No 1331/2008. It defines the scientific data required for the evaluation of those food flavourings for which an evaluation and approval is required according to Article 9 of Regulation (EC) No 1334/2008. This applies to flavouring substances, flavouring preparations, thermal process flavourings, flavour precursors, other flavourings and source materials, as defined in Article 3 of Regulation (EC) No 1334/2008. Information to be provided in all applications relates to: (a) the characterisation of the food flavouring, including the description of its identity, manufacturing process, chemical composition, specifications, stability and reaction and fate in foods; (b) the proposed uses and use levels and the assessment of the dietary exposure and (c) the safety data, including information on the genotoxic potential of the food flavouring, toxicological data other than genotoxicity and information on the safety for the environment. For the toxicological studies, a tiered approach is applied, for which the testing requirements, key issues and triggers are described. Applicants should generate the data requested in each section to support the safety assessment of the food flavouring. Based on the submitted data, EFSA will assess the safety of the food flavouring and conclude whether or not it presents risks to human health and to the environment, if applicable, under the proposed conditions of use.This publication is linked to the following EFSA Supporting Publications article: http://onlinelibrary.wiley.com/doi/10.2903/sp.efsa.2022.EN-7669/full [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the genotoxic potential of five flavouring substances from subgroup 3.3 of FGE.19, in the Flavouring Group Evaluation 216 (FGE.216). In FGE.216 and in FGE.216Rev1, the CEF Panel requested additional genotoxicity data on 2‐phenylcrotonaldehyde [FL‐no: 05.062], the representative for these five substances. New experimental data on [FL‐no: 05.062] were provided and are evaluated in the present revision of FGE.216 (FGE.216Rev2). Based on the new data, the Panel concluded that, for all the five substances, the concerns for gene mutations and clastogenicity are ruled out by the negative results observed in an in vivo gene mutation assay and in an in vivo comet assay, respectively. In vitro, [FL‐no: 05.062] induced micronuclei through an aneugenic mode of action. The available in vivo micronucleus studies were inconclusive and cannot be used to rule out potential aneugenicity of [FL‐no: 05.062] in vivo. Therefore, the Panel compared the lowest concentration resulting in aneugenicity in vitro with the use levels reported for this substance. Based on this comparison, the Panel concluded that the use of the flavouring substance [FL‐no: 05.062] at the reported use levels in several food categories would raise a concern for aneugenicity. Based on structural similarity, for the remaining four substances in this FGE [FL‐no: 05.099, 05.100, 05.175 and 05.222], an aneugenic potential may also be anticipated. For these four substances, individual data are needed to establish whether they have aneugenic potential. Accordingly, it is currently not appropriate to assess any of these five substances through the Procedure for the evaluation of flavouring substances. [ABSTRACT FROM AUTHOR]

Glycerol (E 422) was re‐evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow‐up to that assessment, in this opinion, the Panel on Food Additives and Flavourings (FAF) addresses the data gaps identified to support an amendment of the EU specifications for E 422 in Commission Regulation (EU) No 231/2012. The Panel performed a risk assessment of undesirable impurities present in E 422. The Panel concluded that the maximum limits in the EU specifications for the four toxic elements (arsenic, lead, mercury and cadmium) should be lowered based on actual levels in the commercial food additive E 422. The Panel recommended setting a numerical limit value for acrolein in the specifications for E 422. The potential exposure to free 3‐monochloropropanediol at the maximum limit of 0.1 mg/kg, as laid out in the specifications for E 422, does not give rise to a health concern. The Panel recommended to consider modifying the definition of E 422 in Commission Regulation (EU) No 231/2012 indicating that E 422 is obtained only from vegetable oils and fats and undergoes purification processes that involve distillation, and other clean up steps to obtain refined glycerol. Overall, the Panel concluded that the technical data provided support an amendment of the specifications for glycerol (E 422). [ABSTRACT FROM AUTHOR]

Polyglycerol esters of fatty acids (PEFA, E 475) was re‐evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow‐up to this assessment, in this opinion, the Panel on Food Additives and Flavouring (FAF) addresses the data gaps identified to support an amendment of the EU specifications for E 475. The Panel performed a risk assessment of undesirable impurities and constituents potentially present in E 475. The Panel concluded that the maximum limits in the EU specifications for the 4 toxic elements (arsenic, lead, mercury and cadmium) should be lowered based on actual levels in the commercial food additive E 475. The Panel also concluded that maximum limits for erucic acid, 3‐monochloropropanediol and glycidyl esters should be included in the EU specifications for E 475. Alternatively, the Panel recommends an amendment of the definition of E 475 to include a requirement that the fats and oils used in the manufacturing of E 475 comply with the respective EU legislation regarding suitability for human consumption. Further, the Panel concluded that there is no need for setting a specification limit for the content of trans‐fatty acids in E 475 as a limit is established in the Regulation (EU) No 2019/649, i.e. 2 g of trans‐fat per 100 g fat in food for the final consumer. Finally, the Panel recommends a modification of the definition of E 475 indicating that polyglycerol used for the manufacturing of E 475 should be produced from glycerol meeting the specifications for E 422 (Commission Regulation (EU) No 231/2012). In this case, respective specification limits for epichlorohydrin, acrolein and butanetriol would not be needed for E 475. [ABSTRACT FROM AUTHOR]

The food enzyme complex, containing trypsin (EC 3.4.21.4), chymotrypsin (EC 3.4.21.1), α‐amylase (1,4‐α‐d‐glucan glucanohydrolase, EC 3.2.1.1) and triacylglycerol lipase (triacylglycerol acylhydrolase, EC 3.1.1.3), is obtained from porcine pancreas by American Laboratories, Inc., USA. The food enzyme is intended primarily for the hydrolysis of milk proteins to be used in foods for special medical or nutritional dietary management. ■■■■■ is extensively used in the manufacturing process, and residual amounts of the solvent remain in the food enzyme. The applicant estimates a typical range of ■■■■■ in the food enzyme to be 10,000–13,000 mg/kg. Directive 2009/32/EC sets a maximum residue level of 10 mg/kg for foods and food ingredients produced in the EU or imported into the EU. The use of ■■■■■ for the production of a food enzyme falls within the scope of Directive 2009/32/EC. Consequently, the food enzyme does not comply with the existing requirements within the EU governing residual amount of solvent. [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additive and Flavourings (FAF) assessed the safety of glucosylated steviol glycosides proposed for use as a new food additive in different food categories. Glucosylated steviol glycosides consist of a mixture of glucosylated steviol glycosides, containing 1–20 additional glucose units bound to the parent steviol glycosides. Glucosylated steviol glycosides consist of not less than 95% (on dry, dextrin‐free, basis) of total steviol glycosides, comprised of glucosylated and parent steviol glycosides. Glucosylated steviol glycosides are produced via enzymatic bioconversion using cyclomaltodextrin glucanotransferase (CGTase) (EC 2.4.1.19), derived from a non‐genetically modified strain of Anoxybacillus caldiproteolyticus, that catalyses the transfer of glucose from starch to steviol glycosides mixtures isolated from the dried leaves of Stevia Rebaudiana. The Panel considered that the metabolism of glucosylated steviol glycosides is sufficiently similar to the already authorised steviol glycosides, and thus, the toxicological data previously assessed by the ANS Panel for steviol glycosides (E 960) were considered to support their safety as food additive. The existing acceptable daily intake (ADI) for steviol glycosides (E 960) of 4 mg/kg body weight (bw) per day expressed as steviol can also be applied to glucosylated steviol glycosides. The Panel concluded that there is no safety concern for the use of glucosylated steviol glycosides as a new food additive at the proposed use and use levels. The Panel recommended some modifications to the specifications proposed by the applicant for glucosylated steviol glycosides with respect to the assay, the definition of the proposed new food additive and the proposed maximum limits for arsenic. [ABSTRACT FROM AUTHOR]

EFSA asked the Panel on Plant Protection Products and their residues to deliver a Scientific Opinion on testing and interpretation of comparative in vitro metabolism studies for both new active substances and existing ones. The main aim of comparative in vitro metabolism studies of pesticide active substances is to evaluate whether all significant metabolites formed in the human in vitro test system, as a surrogate of the in vivo situation, are also present at comparable level in animal species tested in toxicological studies and, therefore, if their potential toxicity has been appropriately covered by animal studies. The studies may also help to decide which animal model, with regard to a particular compound, is the most relevant for humans. In the experimental strategy, primary hepatocytes in suspension or culture are recommended since hepatocytes are considered the most representative in vitro system for prediction of in vivo metabolites. The experimental design of 3 × 3 × 3 (concentrations, time points, technical replicates, on pooled hepatocytes) will maximise the chance to identify unique (UHM) and disproportionate (DHM) human metabolites. When DHM and UHM are being assessed, test item‐related radioactivity recovery and metabolite profile are the most important parameters. Subsequently, structural characterisation of the assigned metabolites is performed with appropriate analytical techniques. In toxicological assessment of metabolites, the uncertainty factor approach is the first alternative to testing option, followed by new approach methodologies (QSAR, read‐across, in vitro methods), and only if these fail, in vivo animal toxicity studies may be performed. Knowledge of in vitro metabolites in human and animal hepatocytes would enable toxicological evaluation of all metabolites of concern, and, furthermore, add useful pieces of information for detection and evaluation of metabolites in different matrices (crops, livestock, environment), improve biomonitoring efforts via better toxicokinetic understanding, and ultimately, develop regulatory schemes employing physiologically based or physiology‐mimicking in silico and/or in vitro test systems to anticipate the exposure of humans to potentially hazardous substances in plant protection products. This publication is linked to the following EFSA Supporting Publications article: http://onlinelibrary.wiley.com/doi/10.2903/sp.efsa.2021.EN-6989/full [ABSTRACT FROM AUTHOR]

The present opinion deals with the re‐evaluation of thaumatin (E 957) when used as a food additive. Thaumatin is a natural plant protein, consisting of thaumatin I and thaumatin II proteins together with minor amounts of plant constituents, obtained by acidic aqueous extraction of the arils of the fruit of Thaumatococcus daniellii plant. The Panel followed the conceptual framework for the risk assessment of certain food additives and considered that thaumatin is a digestible protein; adequate exposure estimates were available; there was no concern with respect to the genotoxicity; no conclusion on oral allergenicity could be drawn from the available human data; no adverse effects were observed in sub‐chronic toxicity studies in rats and dogs at the highest dose tested of up 5,200 and 1,476 mg/kg bodyweight (bw) per day, respectively, and in a prenatal developmental toxicity study up to 2,000 mg/kg bw per day; moderate confidence in the body of evidence supported the absence of association between exposure to thaumatin and adverse health outcomes. Therefore, the Panel concluded that there is no need for a numerical acceptable daily intake (ADI) for thaumatin (E 957) and, based on a margin of safety (MOS) of 5,417, considered to be an underestimate and derived using the highest 95th percentile (P95) exposure of 0.48 mg/kg bw per day in consumers only, there is no safety concern for thaumatin (E 957) at the regulatory maximum level exposure assessment scenario, which was considered the most appropriate. The Panel recommended that European Commission considers introducing in the EU specifications for thaumatin (E 957) a new specification limit for the minimum combined content of thaumatin I and II proteins in E 957, a specification limit for yeast, mould counts and Salmonella spp and lowering the existing maximum limit for arsenic along with the inclusion of maximum limits for mercury and cadmium.This publication is linked to the following EFSA Supporting Publications article: http://onlinelibrary.wiley.com/doi/10.2903/sp.efsa.2021.EN-6918/full [ABSTRACT FROM AUTHOR]

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the substance 2-hydroxy-4-methoxybenzaldehyde [FL-no: 05.229] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. 2-Hydroxy-4-methoxybenzaldehyde belongs to chemical group 23 (Commission Regulation (EC) No 1565/2000) and is structurally related to the hydroxy- and alkoxy-ring substituted benzyl derivatives evaluated in FGE.52 and in FGE.20Rev4. The Panel considered the structural/metabolic similarity sufficient to evaluate the candidate substance following a group-based approach according to the EFSA Guidance on the data required for the risk assessment of flavourings to be used in or on foods. The information provided on the manufacturing process, the composition and the stability of [FL-no: 05.229] was considered sufficient. From studies carried out with this substance, the Panel concluded that there is no concern with respect to genotoxicity. Based on QSAR evaluation of possible metabolism, and based on information from structurally related substances, various metabolic routes can be anticipated, which only result in the formation of innocuous metabolites. The exposure estimates for [FL-no: 05.229] (24 and 60 μg/person per day for children and adults, respectively) were below the Threshold of Toxicological Concern (TTC) for its structural class (I). Accordingly, toxicity studies are not required and the Panel concluded at step A3 of the Procedure that 2-hydroxy-4-methoxybenzaldehyde is not of safety concern when used as a flavouring substance at the intended uses and use levels. Cumulative exposure estimates for 2-hydroxy-4-methoxybenzaldehyde and three structurally related substances (2.4 and 6.2 mg/kg body weight (bw) per day for adults and children, respectively) are above the TTC for structural class I, but below the ADI (acceptable daily intake) of 0-10 mg/kg bw per day for vanillin, which is one of these structurally related substances. Therefore, the cumulative exposure to these four substances [FL-no: 05.015, 05.018, 05.229 and 09.749] also does not raise a safety concern. [ABSTRACT FROM AUTHOR]