Search

Alternanthera philoxeroides and Hypophthalmichthys molitrix offer significant nutritional benefits. This study evaluates the proximate composition, amino acid profile, GC-MS analysis, FT-IR spectroscopy, SEM and EDX, and color values of edible paper sheets (EPSs) derived from Alternanthera philoxeroides incorporating different levels of Hypophthalmichthys molitrix flesh. The protein content in the EPSs varied based on fish flesh incorporation, peaking at 52.66% in Ap100/Hm300 (Non-boil). Protein and carbohydrate contents showed an inverse correlation across EPSs, with the highest carbohydrate content of 60.89% in sample Ap400/Hm0 (Boil). Lipid content was also found to correlate with H. molitrix flesh content in EPSs, ranging from 1.59% to 18.41%. Amino acid analysis identified 11 types, with methionine as the most prevalent, followed by leucine, phenylalanine, and lysine. GC-MS analysis revealed 51 bioactive compounds, including carbonic acid, hentriacontane, and various fatty acids. FT-IR analysis showed characteristic bonds, while color analysis displayed L* values ranging from 24.37 to 30.97. SEM analyses depicted the microstructure, surface view, and elemental composition of the EPSs, and EDX showed an abundance of Ca, N, K, O, C, Mg, Na, P, Cl, Mn, and Fe. Therefore, EPSs prepared from A. philoxeroides and H. molitrix could offer a promising approach for effectively utilizing aquatic biomass and providing both plant and animal nutrients to consumers. [ABSTRACT FROM AUTHOR]

Several lignocellulosic wastes are generated in the pulp and paper industry (PPI), such as small wood chips (pinchips) and paper sludge, presenting a high cellulose content suitable to be converted into biofuels or bio-products in a forest biorefinery scheme. In this work, two schemes of biorefinery were proposed for their valorization, processing small eucalyptus wood pinchips in two different strategies: (i) autohydrolysis at 230ºC, and (ii) autohydrolysis at 195ºC followed by organosolv process (47.7% ethanol-water, 198ºC for 60 min). More than 95% of cellulose was recovered in both schemes. In the combined process, 76% of delignification was achieved and 78% of xylan was solubilized as xylooligosaccharides. To reduce operational cost of lignocellulosic biomass-to-ethanol fermentation, the mixture of the treated eucalyptus pinchips from two processes with sludge was also proposed to increase the initial glucan content and to supply a rich source of nitrogen (present in the sludge). For that, two experimental designs were carried out for ethanol production by simultaneous saccharification and fermentation (SSF) process. Ethanol from SSF assays using sludge as co-substrate at 0.6 g of sludge/g of treated wood pinchips and 16 FPU/g of pretreated solids allowed to obtain 59 g/L (90% of conversion) and 46 g/L (96% of conversion) when blended with the wood from autohydrolysis and with the wood from autohydrolysis followed by organosolv, respectively. Overall, this study shows an alternative process valorization of biomasses derived from PPI for production of advanced biofuels and bio-products (such as xylooligosaccharides and lignin) contributing to achieving a circular economy. • Multi-waste valorization approach was proposed to produce biofuel and bioproducts. • Autohydrolysis and organosolv processes allowed > 90% glucan recoveries. • Higher than 40 g/L of ethanol and 90% of yield were obtained in both schemes developed. • Blending with sludge improve ethanol production from pretreated eucalyptus wood. [ABSTRACT FROM AUTHOR]

Herein, we successfully construct the 3D biocompatible graphene through crosslinking 2D graphene nanosheet onto carbon fiber paper with poly(diallyldimethylammonium chloride) (PDDA) as anode of the alcohol biofuel cell. Compared with the bioanode without 3D graphene, the current density and output power of PDDA‐graphene‐ADH bioanode is increased by 23 % and 41 % at a high concentration of ethanol at pH 8.9, suggesting the stabilization role of graphene in enzyme loading. The study provides us a deep analysis on structures and performances of the bioanode incl. electrochemistry, X‐ray photoelectron spectra, and atomic force microscopy images, which is significant to develop the new methods to construct 3D porous electrodes in energy conversion device. [ABSTRACT FROM AUTHOR]

Hibiscus cannabinus (kenaf) is an annual fiber crop grown in warm seasons and known for its remarkable productivity; it has been cultivated worldwide for thousands of years as a fiber source. While every part of the plant can be utilized for some purpose, its primary significance lies in the diverse applications of its cellulosic fiber. Kenaf features a blend of long bast and short core fibers, rendering it suitable for various industrial uses. Initially utilized for cordage and livestock feed, kenaf's applications have expanded over the last century to encompass its utilization as paper pulp, biocomposites, textiles, biomass energy, seed oil, filtration aids, industrial absorbents, and even as a component of potting medium or as a potential source of medicine. Although traditionally a niche crop, the discovery of its diverse applications positions kenaf for rapid expansion in production in the upcoming decades. This article aims to explore the manifold applications of kenaf, highlighting those with the greatest future potential and discussing those that hold promise for commercial-level application with additional research. [ABSTRACT FROM AUTHOR]

• A distributed constant type equivalent circuit model for paper-based lactate biofuel cells was proposed. • Parameter values using electrochemical impedance spectroscopy (EIS) were estimated. • Local EIS measurement was performed to demonstrate the validity of the equivalent circuit model. In this study, a distributed constant-type equivalent circuit model for paper-based lactate biofuel cells (PBFCs) where the anode and cathode are formed on the same plane was constructed, and a method of determining parameter values in the equivalent circuit model was proposed. When PBFC were prepared and the electrochemical impedance of the entire cell was measured, the Nyquist diagram produced a spectrum due to the current line distribution. Parameters, such as charge transfer and solution resistances, were calculated from the obtained spectrum using theoretical impedance equations derived from the proposed equivalent circuit model proposed. In addition, the behavior of the current distribution in the battery was evaluated in detail by moving the reference electrode on and performing local electrochemical impedance spectroscopy at multiple points on the electrode. The models and methods proposed in this study are good for evaluating systems affected by distributed current lines, such as flat batteries, and for determining cell design, electrode areas, and arrangements. [Display omitted] [ABSTRACT FROM AUTHOR]

Herein, a paper-based glucose/air biofuel cell (BFC) was constructed and implemented for self-powered pesticide detection. Our developed paper-based chip relies on a hollow-channel to transport fluids rather than capillarity, which reduces analysis times as well as physical absorption. The gold nanoparticles (Au NPs) and carbon nanotubes (CNTs) were adapted to modify the paper fibers to fabricate the flexible conductive paper anode/cathode electrode (Au–PAE/CNT–PCE). Molecularly imprinted polymers (MIPs) using 2,4-dichlorophenoxyacetic acid (2,4-D) as a template were synthesized on Au–PAE for signal control. In the cathode, bilirubin oxidase (BOD) was used for the oxygen reduction reaction. Based on a competitive reaction between 2,4-D and glucose-oxidase-labeled 2,4-D (GOx-2,4-D), the amount of GOx immobilized on the bioanode can be simply tailored, thus a signal-off self-powered sensing platform was achieved for 2,4-D determination. Meanwhile, the coupling of the paper supercapacitor (PS) with the paper-based chip provides a simple route for signal amplification. Combined with a portable digital multi-meter detector, the amplified signal can be sensitively readout. Through rational design of the paper analytical device, the combination of BFC and PS provides a new prototype for constructing a low-cost, simple, portable, and sensitive self-powered biosensor lab-on-paper, which could be easily expanded in the field of clinical analysis and drug delivery. [ABSTRACT FROM AUTHOR]

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

Paper-based biofuel cells have the potential to serve as health monitoring devices for urinary glucose and volume by incorporating the fabricated electrodes into nursing diapers. In this study, we evaluate the output power and stability of a biofuel cell by combining 3D impedance measurement and admittance analysis. The 3D impedance-based analysis method can simultaneously detect changes in the overall electrode structure of the enzyme electrode and in the quantity of active enzymes and mediators on the electrode surface. The biofuel cell electrodes were fabricated via screen-printing, using polydimethylglycidyl (poly-GMA)- modified MgO-templated carbon (GMgOC) or poly-GMA-unmodified MgO-templated carbon (NMgOC). The enzymes used were flavin adenine dinucleotide-dependent glucose dehydrogenase and bilirubin oxidase, with Azure-A serving as the mediator. Admittance analysis was utilized to measure the enzyme activity and estimate the charge transfer resistance by extrapolating the spectra obtained through admittance analysis. The charge transfer resistances of both electrodes exhibited a greater stability for the GMgOC electrode. This can be attributed to the covalent immobilization of the enzyme and mediator on the electrode facilitated by GMgOC, effectively suppressing enzyme and mediator elution. The electric double-layer capacitance values of both electrodes indicated the overall stability of the electrode structure during the measurement. [ABSTRACT FROM AUTHOR]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined. • The paper analyses the energy strategies in the pulp and paper industry in Sweden. • Energy strategies focus both to improve energy efficiency and develop new energy-products. • The companies' energy strategies combined exploitation and exploration. • A number of managerial implications are presented. [ABSTRACT FROM AUTHOR]

Fly ash (FA) and exhausted bed sands (sands wastes) that are generated in biomass burners for energy production are two of the wastes generated in the pulp and paper industry. The worldwide production of FA biomass is estimated at 10 million tons/year and is expected to increase. In this context, the present work aims to develop one-part alkali-activated materials with biomass FA (0–100 wt.% of the binder) and sands wastes (100 wt.% of the aggregate). FA from two different boilers, CA and CT, was characterized and the mortar's properties, in the fresh and hardened conditions, were evaluated. Overall, the incorporation of FA decreases the compressive strength of the specimens. However, values higher than 30 MPa are reached with 50 wt.% of FA incorporation. For CA and CT, the compressive strength of mortars with 28 days of curing was 59.2 MPa (0 wt.%), 56.9 and 57.0 MPa (25 wt.%), 34.9 and 46.8 MPa (50 wt.%), 20.5 and 13.5 MPa (75 wt.%), and 9.2 and 0.2 MPa (100 wt.%), respectively. The other evaluated characteristics (density, water absorption, leached components and freeze–thaw resistance) showed no significant differences, except for the specimen with 100 wt.% of CA. Therefore, this work proved that one-part geopolymeric materials with up to 90 wt.% of pulp and paper industrial residues (FA and sand) can be produced, thus reducing the carbon footprint associated with the construction sector. [ABSTRACT FROM AUTHOR]

[Display omitted] • New biocathode including BOD, 4-APA, and BP electrode (BP/4-APA/BOD is suggested. • The biocathode is prepared by electrografting method. • Membraneless paper type EBFCs using this biocathode are fabricated. • This paper type EBFC is well operated even in a condition of living body fluid. • OCV/MPD of this paper type EBFC are 0.612 ± 0.002 V/92.025 ± 0.892 μW cm−2. A new biocathode consisting of bilirubin oxidase (BOD), 4-aminophthalic acid (4-APA) and buckypaper (BP) electrode is suggested for enzymatic biofuel cells (EBFCs). Here, to enhance the electron transfer rate of BOD, electrografting method is imported. When this method and 4-APA are utilized, BP surface has negative charges by the polarity arrangement of 4-APA, forming BP/4-APA structure. With the modification of surface charge, T1 active site within BODs having positive charges are strongly bonded with the negative charges of BP/4-APA in neutral pH condition, while the orientation of T1 site is well aligned by electrostatic interaction. This treatment increases both reactivities of cathodic reaction and EBFC performance. To prove that, the performance of membraneless paper-type EBFCs using the new flexible BP/4-APA/BOD biocathode is investigated. According to the evaluations, their maximum power density and open circuit voltage are 92.025 ± 0.892 μW cm−2 and 0.612 ± 0.002 V with injection of 10 mM glucose which is a condition of living body fluid. Such performances are far better than those of other membraneless EBFCs and are large enough to be utilized as a power source of implantable devices for the human body. [ABSTRACT FROM AUTHOR]

The demand for biomass utilization is increasing because of the depletion of fossil resources that are non-renewable in nature. Lignin is the second most renewable organic carbon source, but currently it has limited scope for application in the chemical and fuel industries. Lignin is a side product of the paper and pulp, sugar, and 2G bioethanol industries. Many research groups are working on the value-addition of lignin. Among the lignin depolymerization methods, catalytic hydropyrolysis is gaining attention and is playing a crucial role in developing biorefinery. The hydropyrolysis of lignin was conducted at a higher temperature in the presence of H2. The hydropyrolysis of lignin results in the selective formation of non-oxygenated cyclic hydrocarbons in a shorter reaction time. It is possible to use the cyclic hydrocarbons directly as a fuel or they can be blended with conventional gasoline. This review focuses on the prior art of pyrolysis and hydropyrolysis of lignin. Possible products of lignin hydropyrolysis and suitable synthetic routes to obtain non-oxygenated cyclic hydrocarbons are also discussed. The influence of various process parameters, such as type of reactor, metal catalyst, nature of catalytic supports, reaction temperature, and H2 pressure are discussed with regard to the hydropyrolysis of lignin to achieve good selectivity of cyclic hydrocarbons. [ABSTRACT FROM AUTHOR]

Our understanding of ecosystem functioning is strongly linked to the study of predator–prey relationships and food web structures. However, trophic ecology has often focused on identifying taxonomic relationships and quantifying the biomass or energy ingested by consumers, but has often failed to integrate the importance of the nutritional quality of resources in ecological dynamics. Underlying this gap is the multi‐dimensional nature of resource quality which has hampered any consensus on the definition of resource nutritional quality. In this special issue, we aimed at gathering a subset of articles exemplifying the diversity of variables by which resources quality is quantified, the diversity of research topics that can be tackled in ecology – from physiological or evolutionary aspects to ecosystem processes – and propose some perspectives on the integration of nutritional quality within broader ecological concepts. Using a semi‐automated literature analysis, we map the current landscape of the 'resources nutritional quality' research of the last 30 years. We depict how it has been quantified through physical, biological or chemical indicators, the use of these parameters being largely dependent on the type of ecosystem studied and on the investigated ecological process. We then position the articles published in this special issue of Oikos within this landscape, showing they cover a small but relatively well representative subset of the domains of resources quality‐related issues. Articles in this special issue browse a range of individual and population‐level approaches (embracing evolutionary questions) to community related questions, include methodological issues and ecosystem‐wide approaches using trophic quality indicators as tracers of resources origin. Based on these studies and on the literature review, we identify a non‐exhaustive list of challenges and perspectives of research that we consider of highest priority in the large topic of trophic ecology. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass (LB) is widely used in the field of renewable energy production because of its low price and easy availability. Many kinds of fuels from LB have been developed and are being used in our daily lives. The LB energy has become an indispensable part in the energy mix on account of its steady and sustainable supply. However, there are some neglected issues and misconceptions regarding its development and utilization, although it has numerous advantages over other energy sources. Firstly, its development and utilization can change the living environment of organisms and decrease biodiversity to some extent, relative to using other sources of energy. Secondly, it is not a completely carbon-neutralized fuel as has been claimed in some literature. Finally, its excessive exploitation can seriously damage the environment and biosystems. This editorial will give a brief discussion on some neglected issues and misconceptions during its development and utilization for its suitable exploitation. [ABSTRACT FROM AUTHOR]

Wood has always been an indispensable material in human society throughout history. Its efficient utilization is even more crucial today in achieving the Sustainable Development Goals (SDGs). However, its production, trade, use, and recycling are seldom systematically assessed, with Germany being an exception due to the extensive work conducted by the University of Hamburg and the Thünen Institute over the years. To provide a more precise account of wood use, this study employs oven-dry metric tonne as the reference unit to construct a static wood flow based on the material flow analysis and wood resource balance in Germany in 2020. The Sankey diagrams comprehensively visualize the flow and stock of wood in various sectors, including forests, sawmills, pulp mills, buildings, energy, and waste. Results showed that forest felling volume exceeded growth due to significant wood demand and export, while forest carbon sinks increased because more hardwood was retained in German forests. The building and construction sector was the largest consumer of primary wood products, accounting for 52.1 % of the total, followed by furniture (29.5 %) and packaging (14.0 %). All waste paper was used to produce recycled fiber pulp, whereas only 14 % of waste wood was employed in particle board production. The woody biomass energy, amounting to 142.4 TWh, provided approximately 4.4 % of Germany's primary energy consumption, with around half of it used in private households. In addition to apparent data, this study also uses resource allocation, carbon storage, and cascade potential as examples to demonstrate that wood flow is applicable for further in-depth analysis, supporting wood efficient utilization. It can even be applied to any country and period with sufficient data and conversion factors, but here, they also prevented this study from comprehensively describing past and future wood flows. [Display omitted] [ABSTRACT FROM AUTHOR]

Arctic melting is an effect of climate change; the use of fossil fuels in marine shipping emits large amounts of air emissions that impact climate change, and Arctic aquatic and human life. Swedish pulp and paper mills generate large amounts of waste and side streams that could be utilized. The production of forest-based biofuel may be a promising solution to achieve sustainable Arctic marine shipping. This review highlights the socio-economic impacts associated with the production of forest-based biofuel in Sweden, the related opportunities, challenges, knowledge gaps, and further need of research. From the economic perspective, it was found that the production and use of forest-based biofuel have short and long-term economic sustainability benefits: (a) short-term benefits, the use of the waste and side streams of the pulp and paper industry is a low-cost available feedstock, unlike first-generation biofuel from crops like corn forest-based biofuels neither require additional land use, water resources nor compete with food. (b) Long-term benefits: (i) the Swedish shipping sector depends on imported fossil fuels, these new biofuels can replace partly those imported fossil fuels that will reduce shipping costs, and generate economic benefits for local consumers. (ii) Usage of forest-based biofuels as blends with conventional fuels in existing engines will reduce greenhouse gas emissions from the Arctic shipping to the set limits in the region. (iii) One of the important socioeconomic impacts of forest-based biofuel production and use is the new job creation and employment opportunities that will impact the local communities and livelihoods of indigenous people in the area. From a societal perspective, stakeholder involvement is essential to address the sustainability challenges of biofuel production: EU policymakers need to encourage the production and use of biofuels by developing policies that promote biofuel use. Further studies are needed to develop more efficient and low-cost biofuel production routes, more investments in related research and development are required as well. Local indigenous communities must be involved in the decision-making process through surveys, local dialogues, and research studies. The production of forest-based biofuels has great potential and many social-economic impacts alongside the environmental benefits. [ABSTRACT FROM AUTHOR]

Sustainable power generation for portable electronic devices is of high interest due to increasing energy demands. Miniaturized biofuel cells are well-reported for this purpose where ubiquitous fluids, like glucose or lactate, can be leveraged. However, such biofuel cells need enzymes to complete the catalysis, leading to many prevalent issues like the longevity of enzymes, complicated immobilization, additional mediators etc. Therefore, non-enzymatic glucose biofuel cells (NEGBFCs) are gaining interest due to their cost-effectiveness, high repeatability and excellent stability. However, based on our best knowledge such glucose biofuel cells are not reported in microfluidic environment, and therefore their potential is not exploited. Realization of the functionality of such NEGBFCs in a microscale is crucial to replace them with their enzymatic counterparts. In this work, for the first time, a microfluidic non-enzymatic glucose biofuel cell (μNEGBFC) is developed on a paper-based platform using metallic catalysts. The catalysts for electrocatalytic energy generation is fabricated using electrodeposition method and their detailed physicochemical characterizations are done. The μNEGBFC is capable of producing a power density of 12.5 μW/cm2 with a stable potential of 410 mV. This green power output can be used to operate low-power micro-devices and lab-on-chip sensors in a more continual and viable manner. [Display omitted] • A simple, cost-effective electrodeposition technique was used for electrode fabrication. • Gold deposited anode and copper deposited cathode were used as electrodes. • A paper-based Microfluidic Non-Enzymatic Biofuel Cell (μNGBFC) was constructed. • The developed μNGBFC generated a power density of 12.5 μW/cm2. • The μNGBFC was capable of retaining 56% of the initial power after 72 h. [ABSTRACT FROM AUTHOR]

In this study, eco-friendly and disposable paper-based membraneless microfluidic enzymatic fuel cells (EFCs) were developed without any mediators to reduce the toxicity and cost of EFCs. Glucose oxidase and laccase were immobilized on multi-walled carbon nanotube electrodes to catalyze the redox reaction of glucose and oxygen. Micromachining techniques well-suited for mass production were used to precisely fabricate micro-scale Y-shaped and cross-shaped EFCs. Experimental measurements showed that the concentration of glucose in the fuel solution affects the cell performance, which occurs because the flow speed of the fuel stream decreases as the concentration of glucose increases. The highest performance of power density (104.2 ± 3.35 μW cm−2) and current density (615.6 ± 3.14 μA cm−2) were obtained with the Y-shaped channel configuration at a glucose concentration of 100 mM. This performance is the best of all paper-based single EFCs reported to date. The new paper-based co-laminar flow mediatorless EFC exhibits strong potential to power miniaturized and portable on-site diagnostic devices. • The first mediatorless paper-based co-laminar flow enzymatic fuel cell was developed. • A glucose biofuel cell was micromachined to be precise and mass-producible. • The microchannel of the biofuel cell was designed with Y-shaped and cross-shaped structures. • Electrolyte flow speed decreased with the rise of glucose concentration in the electrolyte. • The proposed fuel cell shows better performance than enzymatic fuel cells with a mediator. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ex-situ catalytic pyrolysis of paper sludge was demonstrated in a pilot plant. • >99 wt% of minerals in the paper sludge are recovered. • The bio-oil with HHV of 40.9 MJ kg−1 is produced with a carbon yield of 21%. • The bio-based chemicals mainly contain paraffins, olefins, and aromatics. Paper sludge is a solid waste by-product abundantly produced in the paper industry and contains fine minerals and lignocellulosic biomass. In this contribution, the ex-situ catalytic fast pyrolysis of paper sludge with a high mineral content of ca. 71 wt% is reported for the first time and demonstrated in a pilot-scale unit (feeding rate of 11.3 kg h−1) using a granular Na 2 CO 3 /γ-Al 2 O 3 catalyst (loading of 650 g) to produce a high-grade bio-oil at a fast pyrolysis temperature of 475 ± 5 °C (pre-screened using a pyroprobe) and a catalytic upgrading temperature of 500 °C. Besides, > 99 wt% minerals in the paper sludge could be recovered, including paper fillers such as CaCO 3 (major) and talc. The bio-oil obtained at a carbon yield of 21 C.% has a low oxygen content of 3.2 wt%, a low total acidity number of 5.2 mg KOH g−1, low H 2 O content of 0.7 wt%, and a high higher heating value of 40.9 MJ kg−1. It consists of value-added bio-based chemicals such as paraffins, olefins, and low molecular weight aromatics. The results demonstrate that the use of paper sludge to recover minerals and to obtain fuels and chemicals using ex-situ catalytic pyrolysis is technically feasible at a pilot plant scale, which will be of importance for the development of future bio-based economy. [ABSTRACT FROM AUTHOR]