Search

Cellulose was isolated from recycled pulp and paper sludge and used to synthesize cellulose nanocrystals. Response surface methodology and Box-Behnken design model were used to predict, improve, and optimize the cellulose isolation process. The optimal conditions were a reaction temperature of 87.5 °C, 180 min with 4% sodium hydroxide. SEM and TEM results revealed that the isolated cellulose had long rod-like structures of different dimensions than CNCs with short rod-like structures. The crystallinity index from XRD significantly increased from 41.33%, 63.7%, and 75.6% for Kimberly mill pulp sludge (KMRPPS), chemically purified cellulose and cellulose nanocrystals, respectively. The TGA/DTG analysis showed that the isolated cellulosic materials possessed higher thermal stability. FTIR analysis suggested that the chemical structures of cellulose and CNCs were modified by chemical treatment. The cellulose surface was highly hydrophilic compared to the CNCs based on the high water holding capacity of 65.31 ± 0.98% and 83.14 ± 1.22%, respectively. The synthesized cellulosic materials portrayed excellent properties for high-end industrial applications like biomedical engineering, advanced materials, nanotechnology, sustainable packaging, personal care products, environmental remediation, additive manufacturing, etc. [ABSTRACT FROM AUTHOR]

Currently, tissue product producers try to meet consumers’ requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency.

Currently, tissue product producers try to meet consumers' requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency. [ABSTRACT FROM AUTHOR]

Banana stem is a known alternative to wood for the production of pulp and paper. During the production of paper, it is extremely important to save costs and time while at the same time enhancing quality of produced paper. In the present study, paper was developed from banana stem fiber by optimizing its density. Response surface methodology (RSM) using Box-Behnken design (BBD) was used to determine optimum blending parameters of the developed papers. The influence of banana stem fiber amount (250-1000 g), water amount (1-2liters) and blending time (5-10 min) on paper density was analyzed using software Stat-Ease 360, Version 13. The optimum conditions of banana stem fiber amount, water amount and blending time to achieve a density of 675.75 g/m3 were determined as 461.83 g, 1.31liters, and 8.53 min, respectively. ANOVA results revealed that the quadratic model best fits the density response, with blending time and banana stem fiber amount as the most significant model terms. Linear effects were more predominant than quadratic and interaction effects. The developed density model was in close agreement with experimental findings with an R2 value of 0.9748. Developed paper had cellulosic contents, with volatiles as high as 82.11%wb and 2.11%wb ash composition. Future works on thermal properties of paper are encouraged.

This study carried out the anaerobic digestion of recycled paper mill wastewater (RPMW) in a high-rate novel anaerobic baffled reactor. The parametric interaction between influent chemical oxygen demand (CODin) and hydraulic retention time (HRT) was modeled, and process responses were optimized by the response surface methodology (RSM) using a three-level factorial design. The results showed that the optimal condition was determined at CODin of 4,000 mg/L and HRT of 2 days and predicted values for COD removal, biochemical oxygen demand (BOD) removal, lignin removal, CH4 content, and CH4 production were found to be 94%, 98%, 68%, 85%, and 20.8 L CH4/d, respectively. According to the statistical analysis of the RSM, all models were significant with very low probability values (from 0.0045 to

The present investigation sought to assess the practicality of utilizing a combined pre-treatment approach comprising electrocoagulation, peroxide, and hypochlorite treatments for the removal of chemical oxygen demand (COD) and tannin/lignin from paper mill wastewater. The study aimed to optimize the operating parameters with a view to maximizing the removal efficiencies while minimizing energy consumption. A pair of iron electrodes were used as anode and cathode in the study, and the main operating parameters were determined as initial pH, applied current, treatment time and oxidant dosage/COD ratio. Response surface methodology (RSM) was used to evaluate the effect of these parameters on COD and tannin/lignin removals. The primary findings of the investigation indicated that the integration of electrocoagulation with peroxide and hypochlorite treatments exhibited efficacy in removing COD, tannin/lignin, colour, phenol, and turbidity from paper mill wastewater. The optimized conditions resulted in COD removal efficiencies of 48.13 ± 2.2% and 29.53 ± 1.4% for EC with H2O2 and Ca(OCl)2, respectively. Tannin/lignin removal efficiencies were 92.59 ± 3.6% and 94.09 ± 1.8% for EC-H2O2 and EC-Ca(OCl)2, respectively. The specific energy consumption (SEC) values showed that EC-Ca(OCl)2 required 7 times more energy than EC-H2O2 for removing 1 kg COD. The principal deduction drawn from the study was that EC-H2O2 pre-treatment demonstrated superior COD removal efficiency and lower energy consumption, while EC-Ca(OCl)2 pre-treatment exhibited greater efficiency in removing toxic and recalcitrant pollutants. In future studies, it would be useful to conduct research to increase COD removal efficiency in addition to tannin/lignin removal in EC-Ca(OCl)2 process. [ABSTRACT FROM AUTHOR]

The global advocacy of resource conservation and waste management emphasizes the significance of sustainable practices, particularly in sectors such as paper manufacturing and recycling. Currently, conventional chemical methods are predominant for paper production, necessitating the use of substantial amount of toxic chemicals. This chemical-intensive approach compromises the recycled fiber quality, generates hazardous effluent causing serious ecological threats which triggers regulatory complexities for the mills. To address these challenges modern research suggests adopting sustainable eco-friendly practices such as employing enzymes. This review aims to explore the applicability of ‘laccase’ enzyme for paper recycling, investigating its properties and contribution to improved recycling practices. By delving into the potential application of laccase integration into the papermaking process, this article sheds light on the limitations inherent in traditional methods surmounted within both research and translational landscapes. Culture and process optimization studies, supporting the technological improvements and the future prospects have been documented. [ABSTRACT FROM AUTHOR]

Emergency general surgeons often provide care to severely ill patients requiring surgical interventions and intensive support. One of the primary drivers of morbidity and mortality is perioperative bleeding. In general, when addressing life threatening haemorrhage, blood transfusion can become an essential part of overall resuscitation. However, under all circumstances, indications for blood transfusion must be accurately evaluated. When patients decline blood transfusions, regardless of the reason, surgeons should aim to provide optimal care and respect and accommodate each patient's values and target the best outcome possible given the patient's desires and his/her clinical condition. The aim of this position paper was to perform a review of the existing literature and to provide comprehensive recommendations on organizational, surgical, anaesthetic, and haemostatic strategies that can be used to provide optimal peri-operative blood management, reduce, or avoid blood transfusions and ultimately improve patient outcomes. [ABSTRACT FROM AUTHOR]

Demand for green environments has stimulated research on the migration from conventional to renewable energy sources. In the case of combustible energy for domestic applications, briquettes produced from biomass have proven to be a good replacement for wood fuel. In this study, investigation on the performance analysis and optimization of mix ratio of briquettes produced from sugarcane bagasse using composite binders (waste paper and clay) was carried out. Box-Behnken Design feature of the Design Expert software was employed for the optimization of the briquettes mix ratio. Briquettes were produced from sugarcane bagasse based on the optimum conditions of 9.12% clay, 12.57% waste paper, 78.31% proportion of sugarcane bagasse and 5 KN compaction pressure. The produced briquette was found to have a compressive strength of 6.4715 MPa and 0.857 g/min burning rate. The results of the study shows that the experimental values were close to the predicted values with a percentage error of 3.11% for compressive strength and1.79% for burning rate which confirms the validity and adequacy of the predicted models. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The article deals with the problem of calculating the volume calendar plan of a paper mill. The presented mathematical model and methods make it possible to schedule paper production orders between several paper machines (PM) to even their loading, devise cutting plans for each winder and arrange the order of their implementation. When forming cutting plans, orders are grouped in accordance with such parameters as grammage, roll diameter, core diameter, product type and number of layers. Deadlines and volumes in customer orders are taken into account. The cutting plans for each winder account for the allowable roll width limits and the maximum number of knives. To find the optimal schedule, a combination of the following criteria is used: minimal trim loss, minimal changes to the knives' setup and smooth transitions by product grades. Solution algorithms are presented that use a combination of the simplex method, the column generation, the branch and bound methods, the greedy algorithm and the local search procedure. We tested the solution approach on real production data from a paper mill in European Russia and obtained the production sequence that better matches deadlines in customer orders compared to the plan devised manually by production planners. [ABSTRACT FROM AUTHOR]

Demand for green environments has stimulated research on the migration from conventional to renewable energy sources. In the case of combustible energy for domestic applications, briquettes produced from biomass have proven to be a good replacement for wood fuel. In this study, investigation on the performance analysis and optimization of mix ratio of briquettes produced from sugarcane bagasse using composite binders (waste paper and clay) was carried out. Box-Behnken Design feature of the Design Expert software was employed for the optimization of the briquettes mix ratio. Briquettes were produced from sugarcane bagasse based on the optimum conditions of 9.12% clay, 12.57% waste paper, 78.31% proportion of sugarcane bagasse and 5 KN compaction pressure. The produced briquette was found to have a compressive strength of 6.4715 MPa and 0.857 g/min burning rate. The results of the study shows that the experimental values were close to the predicted values with a percentage error of 3.11% for compressive strength and1.79% for burning rate which confirms the validity and adequacy of the predicted models.

[Display omitted] • Optimization study of Photo-Fenton and PDS/UV processes for BOD and COD removal. • Photo-Fenton process was able to enhance biodegradability. • PDS/UV process on the best condition only could maintain the biodegradability. • The operational cost of Photo-Fenton processes is much cheaper than PDS/UV process. The aim of this study is to provide an Advanced Oxidation Process (AOP) based solution to enhance biological treatment efficiency by improving biodegradability of wastewater. Photo-Fenton and Peroxydisulfate (PDS)/UV processes were selected in this study as a representative of hydroxyl and sulfate radical based AOPs. A central composition design (CCD) employed to optimize operational cost and BOD/COD ratio to determine optimal conditions for enhancing wastewater treatment efficiency. The study achieved a maximum COD removal of 71.5 % and increased wastewater biodegradability. Optimal conditions for Photo-Fenton process were DOD (H 2 O 2) 0.28, [Fe2+] 106.26 mg/L, and pH 2.32, costing 2.27 USD per 1 kg COD removed. For PDS/UV process, 75.5 % COD removal was achieved at a cost of 10.6 USD/1 kg removed COD. The PDS/UV process had higher COD removal than Photo-Fenton but did not improve wastewater biodegradability. Optimal conditions were DOD (PDS) 0.19, pH 6.68, costing 10.6 USD/1 kg COD removed. [ABSTRACT FROM AUTHOR]

• A Goal Programming model to optimize a waste paper recycling network was elaborated. • The model considers objectives related to sustainability, multiple products and periods. • Vehicle routing, different-capacity vehicles and multiple trips are highlights. • The possibility of storing material at the collection points is considered. • The formulation provides relevant solutions to assist decision-makers. Organization and planning of reverse logistics networks make sustainable processes more efficient. Thus, an important sector for connecting the collection and waste paper recycling echelons is the intermediate center. In this study, a Mixed Integer Linear Programming model, which is multi-objective, multi-product, multi-level and multi-period, was developed to optimize the waste paper logistics processes of intermediate centers. The formulation includes the following echelons: collection, considering vehicle routing with different capacities; inventory of non-baling materials; baling sorted waste and inventory of bales; selling bales; disposal of non-recyclable waste. The aims of the model include: maximizing the collected waste; minimizing distances; maximizing both the production and sale of bales, and minimizing costs. According to research carried out in the literature, the developed model is a new proposal and to implement it, the Weighted Goal Programming and Revised Multi-Choice Goal Programming approaches were used to deal with multiple objectives and incorporate uncertainty into the quantity of waste available for collection. To analyze the proposed model, computational tests were executed with instances based on real data from a Brazilian company in the sector. For all performed tests, General Algebraic Modeling System 23.6.5 modeling language and CPLEX 12.2.0.2 solver were used for modeling and optimization. The results show that this study presents formulation and technological approaches that represent real situations and provide competitive solutions to the problem. [ABSTRACT FROM AUTHOR]

Abstract By way of broadening the use of diverse sustainable bioethanol feedstocks, the potentials of Paper mulberry fruit juice (PMFJ), as a non-food, sugar-based substrate, were evaluated for fuel ethanol production. The suitability of PMFJ was proven, as maximum ethanol concentration (56.4 g/L) and yield (0.39 g/g) were achieved within half a day of the start of fermentation, corresponding to very high ethanol productivity of 4.7 g/L/hr. The established potentials were further optimally maximized through the response surface methodology (RSM). At the optimal temperature of 30 °C, yeast concentration of 0.55 g/L, and pH of 5, ethanol concentration, productivity, and yield obtained were 73.69 g/L, 4.61 g/L/hr, and 0.48 g/g, respectively. Under these ideal conditions, diverse metal salts were afterward screened for their effects on PMFJ fermentation. Based on a two-level fractional factorial design, nutrient addition had no positive impact on ethanol production. Thus, under the optimal process conditions, and without any external nutrient supplementation, bioethanol from PMFJ compared favorably with typical sugar-based energy crops, highlighting its resourcefulness as a high-value biomass resource for fuel ethanol production. Graphical Abstract

In a society where advances and innovations occur on a daily basis, outreach and meaningful engagement with the general public become more challenging. The amount of information produced and repackaged surpasses existing systems in place to ensure truthful and factual engagement with the public, especially with complex matters regarding health science. This perspective paper discusses the value of contextualization and optimization for creating transparent and engaging content. We reflect on the innovative Transformative Storytelling Technique as a new category creating hybrid content to guide the experience of audiences, starting with the case of informal caregivers helping individuals living with neurological conditions. Moreover, we share our perspective on the important considerations for current and future development of highly targeted content using this technique. We include reflexions around the risks and ethical principles needed in the utilization and dissemination of “guided” content for the general public.

A multi-modal search space can be defined as having multiple attraction basins – each basin has a single local optimum which is reached from all points in that basin when greedy local search is used. Optimization in multi-modal search spaces can then be viewed as a two-phase process. The first phase is exploration in which the most promising attraction basin is identified. The second phase is exploitation in which the best solution (i.e. the local optimum) within the previously identified attraction basin is attained. The goal of thresheld convergence is to improve the performance of search techniques during the first phase of exploration. The effectiveness of thresheld convergence has been demonstrated through applications to existing metaheuristics such as particle swarm optimization and differential evolution, and through the development of novel metaheuristics such as minimum population search and leaders and followers.

Background and Objectives: Wastewater treatment of paper recycling and cardboard industries with the aim of water recycling and reducing environmental impact is one of the daily needs of industries. Therefore, the aim of the present study was to optimize the conditions of coagulation and flocculation process in wastewater treatment of paper recycling industries using the response surface method. Materials and Methods: In this laboratory study, response surface method and central composite design were used to design the experiments and to determine the effects of the studied variables (pH, concentrations of alum, Poly aluminum chloride (PAC), and cationic polymer) on the total suspended solid (TSS) and chemical oxygen demand (COD) removal efficiency. Data analysis was done using ANOVA statistical test with a significant level of 0.05. Results: The results showed that in the combination of PAC with cationic polymer (optimal conditions; pH=7.5, PAC concentration=450 mg/L, cationic polymer concentration=1.5 mg/L), the TSS and COD removal efficiency were 97.34% and 75.76%, respectively. In combination of alum with cationic polymer (optimal conditions; pH=8.5, alum concentration=550 mg/L, cationic polymer concentration=2 mg/L), removal efficiencies were 98.96% and 77.83%, respectively. The simultaneous effects of two independent variables, pH and concentration, had a significant effect (p<0.05) in removing TSS and COD variables. Conclusion: The results showed that the combination of PAC with cationic polymer had a better efficiency. Also, the COD and TSS in the final effluent were higher and lower than the standard values, respectively. Therefore, chemical coagulation process is proposed as pretreatment. [ABSTRACT FROM AUTHOR]

The integrated industrial control systems require a reliable communication among each part of control systems. The limitation of network topology comprises the low latency of data transmission. The network algorithm topologies are sometimes failed to ensure the faulttolerant network design even if they offer it. Therefore, this works investigates a Node Insertion Algorithm (NIA) and Ant Colony Optimization (ACO) in order to solve the Travelling Salesman Problem (TSP) for network topologies in a communication network. The NP Non deterministic (polynomial time)-hardness based of TSP leads to the impossibility of polynomial time algorithm to solve an exponentially increasing amount of communication addresses. TSP itself is a well-known solution method known in the graph theory which is based on approximation algorithm. Therefore, this work also presents a comparison between the NIA and ACO for 200 nodes of network topologies. The results show that NIA is superior than ACO in terms of resulting ring's cost and computation duration. Three topologies are tested and it is observable that NIA requires only 14.88 seconds to finish the computation in which the resulting ring's length reaches 164019 units. Therefore, the achievement of the NIA can be applied for logical and physical nodes for a reliable connection in an industrial topology network. [ABSTRACT FROM AUTHOR]

The air-drying of resin impregnated paper sheets in industrial lines, formed by a serial array of furnaces, presents a high number of different controllable operational parameters whose adjustment, usually done by the maintenance staff, leads to non-efficient configurations. A model-based numerical tool, which predicts accurately in a few seconds the evolution of the paper temperature and paper grammage along the line for a given combination of the input operational parameters (direct design), was used coupled to an optimization tool to select appropriate operational parameters (inverse design) that ensure a drying process quality (i.e., fulfills an objective grammage profile) with a minimum of energy consumption. The numerical tool was capable of selecting suitable configurations with an energy reduction of up to 50% for several tested industrial cases, making the model an essential tool in the framework of the increasingly relevant role of digital twins in industry. [ABSTRACT FROM AUTHOR]

Despite their widespread applications in sectors such as pulp and paper, textile, food and beverage, pharmaceuticals, and biofuel production, laccases encounter challenges related to their activity and stability under varying reaction conditions. This review accumulates data on the complex interplay between laccase characteristics and reaction conditions for maximizing their efficacy in diverse biotechnological processes. Benefits of organic media such as improved substrate selectivity and reaction control, and their risks such as enzyme denaturation and reduced activity are reported. Additionally, the effect of reaction conditions such as pH and temperature on laccase activity and stability are gathered and reported. Sources like Bacillus pumilus, Alcaligenes faecalis, Bacillus clausii, and Bacillus tequilensis SN4 are producing laccases that are both thermo-active and alkali-active. Additionally, changes induced by the presence of various substances within reaction media such as metals, inhibitors, and organic solvents are also reported. Bacillus pumilus and Bacillus licheniformis LS04 produce the most resistant laccases in this case. Finally, the remarkable laccases have been highlighted and the proper laccase source for each industrial application is suggested. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Food Safety & Quality is the property of Journal of Food Safety & Quality Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

[Display omitted] • Waste office paper was utilized as a substrate for microbial lipid production. • A detailed optimization study has been conducted for biomass and lipid yield. • Optimization results in10.55 g/L biomass, 6.13 g/L lipid with 58% lipid content. • Biodiesel properties of the produced lipids met with the international standards. • A solution to mitigate the hazardous effects caused by waste and fossil fuel. Environmental issues caused by fossil fuel and its rapid depletion demand the need to produce biofuel from renewable energy resources. The disposal of waste paper in landfills causes air pollution and contaminates groundwater. Hence, exploiting paper waste as a renewable resource for microbial lipid production can solve these environmental issues in a greener way. Further, these microbial lipids are a reliable source for biodiesel production. In this study, waste office paper was utilized as a substrate to produce microbial lipids through fermentation by the oleaginous yeast, Rhodosporidium toruloides, using a biorefinery approach. The production conditions were optimized using the Box-Behnken design; a fermentation time of 116.16 h, a C/N ratio of 60, and an inoculum concentration of 9.67% yielded a biomass of 10.55 g/L and a lipid yield of 6.13 g/L with a total lipid content of 58%. The major lipids produced were oleic acid (42%), palmitic acid (36%), stearic acid (9.8%), and myristic acid (8%), which clearly indicates the suitability of the lipids produced by R. toruloides for biodiesel production. The predicted biodiesel properties of the transesterified product met the international standard specifications. Hence, utilizing waste office paper for biodiesel production will be an effective way of mitigating the environmental pollution caused by waste paper and the harvesting of fossil fuels. [ABSTRACT FROM AUTHOR]

Optimization of alkaline hydrogen peroxide (AHP) pretreatment and enzymatic hydrolysis of wheat straw (WS) was carried out to enhance fermentable sugar yields with the use of glucose and xylose yields from the pretreated WS as responses. In the first step, variables including temperature, hydrogen peroxide concentration and time during pretreatment were detected to have significant effects on the sugar yields. The results indicate that maximal sugar yields could be obtained while the WS was pretreated using 71 g/L hydrogen peroxide solution with 200 g/L of solid loading at 50 °C for 7.6 h. The corresponding cellulose recovery, hemicellulose recovery and lignin removal were 97.5%, 84.3% and 75.0%, respectively. In the second step, enzymatic hydrolysis of the pretreated WS was optimized. The results show that the reaction time, enzyme loading and biomass loading during enzymatic hydrolysis also had significant effects on the sugar yields. The final maximum yields of glucose (552.7 mg/gds (mg/g dry substrate)) and xylose (223.6 mg/gds) could be obtained while enzymatic hydrolysis was carried out at 50 °C for 37.0 h using 10.8 FPU/gds (filter paper activity unit per gram dry substrate) of enzyme loading, 88 g/L of biomass loading and 0.3% (w/v) of Tween-80. The corresponding cellulose conversion and hemicellulose conversion were 94.0% and 83.5%, respectively. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)