Search

In this study, we address the challenge of developing highly conductive hydrogels with enhanced stretchability for use in wearable sensors, which are critical for the precise detection of human motion and subtle physiological strains. Our novel approach utilizes amylopectin, a biopolymer, for the uniform integration of liquid metal gallium into the hydrogel matrix. This integration results in a conductive hydrogel characterized by remarkable elasticity (up to 7100 % extensibility) and superior electrical conductance (Gauge Factor = 31.4), coupled with a minimal detection limit of less than 0.1 % and exceptional durability over 5000 cycles. The hydrogel demonstrates significant antibacterial activity, inhibiting microbial growth in moist environments, thus enhancing its applicability in medical settings. Employing a synthesis process that involves ambient condition polymerization of acrylic acid, facilitated by a hydrophobic associative framework, this hydrogel stands out for its rapid gelation and robust mechanical properties. The potential applications of this hydrogel extend beyond wearable sensors, promising advancements in human-computer interaction through technologies like wireless actuation of robotic systems. This study not only introduces a viable material for current wearable technologies but also sets a foundation for future innovations in bio-compatible sensors and interactive devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Porphyromonas gingivalis causes various health issues through oral infections. This study investigates the antibacterial activities of food-derived dihydrochalcone flavonoids against Porphyromonas gingivalis and their mechanisms of antibacterial action through comparative transcriptome profiling. Susceptibility tests showed that two typical dihydrochalcone flavonoids (phloretin and phlorizin) had much lower minimum inhibitory concentrations (12.5 μg mL -1 and 50 μg mL -1 , respectively) than the common flavanone naringenin (100 μg mL -1 ). SEM observations and the LDH activity assay indicated obvious anomalies in cell morphology and increased cell membrane permeability, indicating the destructive effect of those compounds on the cell structure. These compounds might also induce apoptosis in P. gingivalis , as shown by the CLSM fluorescence images. Transcriptomic analysis revealed that the flavonoid treatment impacted DNA function and oxidative damage. These flavonoids may activate antioxidant-related pathways that are lethal to anaerobic bacteria like P. gingivalis . Additionally, the compounds resulted in the silencing of transposition-related genes, potentially inhibiting resistance-gene acquisition and expression. Phloretin regulated fatty acid metabolism pathways, which are related to the construction and maintenance of the cell membrane. This suggests a relationship between the structure and antibacterial activities of the tested compounds that share a flavonoid skeleton but differ in the C-ring and glucose moiety. This is the first report of the antibacterial activities and mechanisms of action of food-derived dihydrochalcone flavonoids at the transcriptome level, offering a promising approach for the development of new antibacterial agents from natural products and enhancing their applicability in treating diseases associated with oral pathogens as a substitute for antibiotics.

Diabetic wounds are prone to recurrent infections, often leading to delayed healing. To address this challenge, we developed a chitin-copper sulfide (CuS@CH) composite sponge, which combines bacterial trapping with near-infrared (NIR) activated phototherapy for treating infected diabetic wounds. CuS nanoparticles were synthesized and incorporated in situ within the sponge using a chitin assisted biomineralization strategy. The positively charged chitin surface effectively adhered bacteria, while NIR irradiation of CuS generated reactive oxygen species (ROS) heat and Cu 2+ to rapidly damage the trapped bacteria. This synergistic effect resulted in an exceptional antibacterial performance against E. coli (∼99.9%) and S. aureus (∼99.3%). The bactericidal mechanism involved NIR-induced glutathione oxidation, membrane lipid peroxidation, and increased membrane permeability. In diabetic mouse models, the CuS@CH sponge accelerated the wound healing of S. aureus infected wounds by facilitating collagen deposition and reducing inflammation. Furthermore, the sponge demonstrated good biocompatibility. This dual-functional platform integrating bacterial capture and NIR-triggered phototherapy shows promise as an antibacterial wound dressing to promote healing of infected diabetic wound.

Traditional packaging materials feed the growing global food protection. However, these packaging materials are not conducive to environment and have not the ability to kill bacteria. Herein, a green and simple strategy is reported for food packaging protection and long-term antibacterial using carboxymethylcellulose-based photothermal film (CMC@CuS NPs/PVA) that consists of carboxymethyl cellulose (CMC) immobilized copper sulfide nanoparticles (CuS NPs) and polyvinyl alcohol (PVA). With satisfied oxygen transmittance (0.03 cc/m 2 /day) and water vapor transmittance (163.3 g/m 2 /day), the tensile strength, tear strength and burst strength reached to 3401.2 N/m, 845.7 mN and 363.6 kPa, respectively, which could lift 4.5 L of water. The composite film had excellent photothermal conversion efficiency and photothermal stability. Under the irradiation of near infrared (NIR), it can rapidly heated up to 197 °C within 25 s. The antibacterial analysis showed that the inhibition rate of composite film against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) could all reach >99 %. Furthermore, the synthesized CuS NPs was well immobilized and the residual rate of copper kept 98.7 % after 10 days. Noticeably, the composite film can preserve freshness of strawberries for up to 6 days. Therefore, the composite film has potential application for food antibacterial protection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

To find a new way to slow down the release of glufosinate (GA) pesticide and to solve the susceptibility to decomposition by soil microorganisms, a series of novel antibacterial polysaccharide-based sustained release beads (PSRB) were prepared. The PSRB was prepared by immobilization of GA loaded polysaccharide-based chitosan quaternary ammonium salt (PS-HACC) microcapsules in the core and layers of the multilayer sodium alginate beads. The PSRB was characterized by FI-IR spectroscopy, XRD, SEM, and BET to reveal their composition and surface morphology. The optimal conditions of the slow release beads were as follows, the concentration of Ca 2+ , pH, temperature and the coating layer number was 0.1 mol/L, 7, 25 °Cand 3, respectively. The kinetic study showed that the slow release of PSRB was in accordance with the Higuchi kinetic model, and the FI-IR and XRD analyses revealed that the PS-HACC and GA were successfully cross-linked to the PSRB. BET showed that PSRB were greater than PSRB 3 at surface area, pore volume and pore size. Inhibition circles experiments demonstrated that WPSRB 3 has good antibacterial activity. The weed control in soybean with PSRB 3 application is perfect and the weed control cycle is long. Therefore, this technology can provide a potential way to control GA release, improve utilization efficiency, reduce pesticide use and environmental pollution, and at the same time, provide a potential way to achieve ecological agriculture., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Petroleum-based packaging materials are nondegradable and unsustainable and thus are harmful to the environment. Renewable packaging films prepared from bio-based raw materials are promising alternatives to petroleum-based packaging materials. In this study, colorless and transparent bio-based films were successfully cast using a solution containing a mixture of arabinogalactan (AG) and poly (vinyl alcohol) (PVA). Vanillin was incorporated into the mixture to endow the films with UV-shielding, antioxidant, and antibacterial properties. The morphological, physical, antioxidant, and antibacterial properties of the blend films were then characterized. At an AG:PVA weight ratio of 1:3, and the vanillin content was 0.15 %, the tensile strength of the AG/PVA/Vanillin (APV) films reached ~28 MPa, while their elongation at break reached ~475 %. The addition of vanillin significantly affected the antioxidant and antibacterial properties of the blend films, which exhibited superb UV barrier capacity. The APV films exhibited extremely low oxygen transmittance, delaying the onset of mold/rot in strawberries and reducing their weight loss. Because of the heat sealability of the blend films, they can be used for encapsulating various substances, such as concentrated laundry liquid. Moreover, the blend films were recyclable and biodegradable. Thus, these films have great potential for applications that require sustainable packaging., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024. Published by Elsevier B.V.)

Treatment of infected wound by simultaneously eliminating bacteria and inducing angiogenesis to promote wound tissue regeneration remains a clinical challenge. Dynamic and reversable hydrogels can adapt to irregular wound beds, which have raised great attention as wound dressings. Herein, a sprayable chitosan-based hydrogel (HPC/CCS/ODex-IGF1) was developed using hydroxypropyl chitosan (HPC), caffeic acid functionalized chitosan (CCS), oxidized dextran (ODex) to crosslink through the dynamic imine bond, which was pH-responsive to the acidic microenvironment and could controllably release insulin growth factor-1 (IGF1). The HPC/CCS/ODex-IGF1 hydrogels not only showed self-healing, self-adaptable and sprayable properties, but also exhibited excellent antibacterial ability, antioxidant property, low-cytotoxicity and angiogenetic activity. In vivo experiments demonstrated that hydrogels promoted tissue regeneration and healing of bacteria-infected wound with a rate of approximately 98.4 % on day 11 by eliminating bacteria, reducing inflammatory and facilitating angiogenesis, demonstrating its great potential for wound dressing., Competing Interests: Declaration of competing interest The author declare that they have no competing financial interests or personal relationships that could have appeared to influence the work reported in the paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Conventional oil-water separation membranes are difficult to establish a trade-off between membrane flux and separation efficiency, and often result in serious secondary contamination due to their fouling issue and non-degradability. Herein, a double drying strategy was introduced through a combination of oven-drying and freeze-drying to create a super-wettable and eco-friendly oil-water separating aerogel membrane (TMA df ). Due to the regular nacre-like structures developed in the drying process and the pores formed by freeze-drying, TMA df aerogel membrane finally develops regularly arranged porous structures. In addition, the aerogel membrane possesses excellent underwater superoleophobicity with a contact angle above 168° and antifouling properties. TMA df aerogel membrane can effectively separate different kinds of oil-water mixtures and highly emulsified oil-water dispersions under gravity alone, achieving exceptionally high flux (3693 L·m -2 ·h -1 ) and efficiency (99 %), while being recyclable. The aerogel membrane also displays stability and universality, making it effective in removing oil droplets from water in corrosive environments such as acids, salts and alkalis. Furthermore, TMA df aerogel membrane shows long-lasting antibacterial properties (photothermal sterilization up to 6 times) and biodegradability (completely degraded after 50 days in soil). This study presents new ideas and insights for the fabrication of multifunctional membranes for oil-water separation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This research presents a new approach to facilely fabricating a multifunctional film using polyvinyl alcohol (PVA) as the base material. The film is modified chemically to incorporate various desirable properties such as high transparency, UV-shielding, antibacterial activity, and fluorescence. The fabrication process of this film is straightforward and efficient. The modified film showed exceptional UV-blocking capability, effectively blocking 100% of UV radiation. It also exhibits strong antibacterial properties. Additionally, the film emitted bright blue fluorescence, which can be useful in various optical and sensing applications. Despite the chemical modification, the film retained the excellent properties of PVA, including high transparency (90%) at 550 nm and good mechanical strength. Furthermore, it demonstrated remarkable stability even under harsh conditions such as exposure to long-term UV radiation, extreme temperatures (-40 or 120 °C), or immersion in different solvents. Overall, this work showcases a promising strategy to develop versatile, structurally stable, transparent, and flexible polymer films with multiple functionalities. These films have potential applications in various fields that require protection, such as packaging materials, biomedical devices, and optical components., (© 2024 Wiley‐VCH GmbH.)

Improving electron transfer rate of Co species and inhibiting aggregation of metal-organic frameworks (MOFs) particles are essential prerequisites for activating advanced oxidation process in wastewater treatment field. Here, we exploit Cu species with variable valence states to accelerate electron transfer of Co species and then to boost the unsatisfactory degradation efficiency for refractory pharmaceuticals via in-situ growth of copper and cobalt species on l-lysine functionalized carboxylated cellulose nanofibers. Utilizing the synergistic interplay of Co sites and deliberately exposed Cu 0 /Cu 1+ atoms, the subtly designed catalyst exhibited a surprising degradation efficiency (~100 %) toward tetracycline hydrochloride within 10 min (corresponding to a catalytic capacity of 267.71 mg/g) without adjusting temperature and pH. Meanwhile, the catalyst displays good recyclability, well tolerance for coexisting ions and excellent antibacterial performance derived from the intrinsic antibacterial property of Cu-MOF. This research provided a novel strategy to construct MOFs-cellulose materials toward degrading various stubborn antibiotic pollutants., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Solar desalination is an effective solution to address the global water scarcity issue. However, biofouling poses a significant challenge for solar evaporators due to the presence of bacteria in seawater. In this study, an anti-biofouling evaporator was constructed using the synergistic antibacterial effect of lignin and silver nanoparticles (AgNPs). The AgNPs were easily synthesized using lignin as reductant under mild reaction conditions. Subsequently, the Lignin-AgNPs solution was integrated into polyacrylamide hydrogel (PAAm) without any purification steps, resulting in the formation of Lignin/AgNPs-PAAm (LAg-PAAm). Under the combined action of AgNPs and the hydroquinone groups present in oxidized lignin, LAg-PAAm achieved over 99 % disinfection efficiency within 1 h, effectively preventing biofilm formation in pore channels of solar evaporators. The anti-biofouling solar evaporator demonstrated an evaporation rate of 1.85 kg m -2  h -1 under 1 sun irradiation, and maintained stable performance for >30 days due to its high efficient bactericidal effect. Furthermore, it also exhibited exceptional salt-rejection capability attributed to its superior hydrophilicity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The purpose of this study was to enhance the antimicrobial activity of bagasse paper by coating the paper with bismuth oxide (Bi 2 O 3 ) and using it to accelerate the process of wound healing. Paper sheets were prepared from sugarcane waste (bagasse). First, the paper sheets were coated with different Bi 2 O 3 concentrations to improve the antimicrobial activity of the paper. After that, the paper sheets were allowed to dry in an oven at 50 °C for 3 h. Then, in vitro antimicrobial activity was evaluated against different microbial species, including Gram-negative bacteria (i.e., Klebsiella pneumonia, Escherichia coli) and Gram-positive bacteria (i.e., Staphylococcus aureus, Streptococcus pyogenes). The obtained results showed that the paper coated with 25% and 100% Bi 2 O 3 had activity against all models of bacteria; however, the paper coated with 100% Bi 2 O 3 composite had the strongest inhibitory effect. Then, bagasse paper was coated with 100% Bi 2 O 3 and different antibiotics, to investigate their wound-healing potency in a wounded rat model for 14 days. Moreover, the paper coated with 100% Bi 2 O 3 inhibited the cellular migration in vitro. Conclusively, coating paper with Bi 2 O 3 enhances the wound-healing potential when applied to wounds. This impact could be ascribed to Bi 2 O 3 's broad antibacterial activity, which reduced infection and accelerated the healing process.

Sustainable organohydrogel electronics have shown promise in resolving the electronic waste (e-waste) evoked by traditional chemical cross-linking hydrogels. Herein, thermoplastic-recycled gelatin/oxidized starch (OST)/glycerol/ZnCl 2 organohydrogels (GOGZs) were fabricated by introducing the anionic polyelectrolyte OST and solvent exchange strategy to construct noncovalently cross-linking networks. Benefiting from the electrostatic interaction and hydrogen and coordination bonds, GOGZ possessed triple-supramolecular interactions and a continuous ion transport pathway, which resulted in excellent thermoplasticity and high ionic conductivities and mechanical and antibacterial properties. Because of the thermally induced phase transition of gelatin, GOGZ exhibited isotropic-ionic conductivity with a positive temperature coefficient and realized intrinsic affinity with the activated carbon electrode for fabricating a double-layer structure supercapacitor. These novel features significantly decreased the impedance (3.71 Ω) and facilitated the flexible supercapacitors to achieve thermoenhanced performance with 4.89 Wh kg -1 energy density and 49.2 F g -1 specific mass capacitance at 65 °C. Fantastically, the GOGZ-based stress sensor exhibited a monolinear gauge factor ( R 2 = 0.999) at its full-range strain (0 to 350%), and its sensitivity increased with the thermoplastic-recycled times. Consequently, this sustainable and temperature-sensitive sensor (-40 to 60 °C) could serve as health monitoring wearable devices with excellent reliability ( R 2 = 0.999) at tiny strain. Moreover, GOGZ could achieve efficient self-enhancement by stretch-induced alignment. The sustained weighted load, tensile strength, and elongation at break of the stretch-induced GOGZ were 6 kg/g, 2.37 MPa, and 300%, respectively. This self-enhanced feature indicated that GOGZ can be utilized as an artificial muscle. Eventually, GOGZ obtained high intrinsic antibiosis ( D inhibition circle > 25 mm) by a binding species (-COO - NH 3 + -) from COOH in OST and NH 2 in gelatin, freezing resistance, and water retention. In summary, this study provided an effective strategy to fabricate thermoplastic-recycled organohydrogels for multifunctional sustainable electronics with novel performance.

The lignin precursors of coniferin and syringin were synthesised, and guaiacyl-type and guaiacyl-syringyl-type oligomeric lignin dehydrogenation polymers (DHP and DHP-GS) were prepared with the bulk method. The carbon-13 nuclear magnetic resonance spectroscopy showed that both DHP-G and DHP-GS contained β-O-4, β-5, β-β, β-1, and 5-5 substructures. Extraction with petroleum ether, ether, ethanol, and acetone resulted in four fractions for each of DHP-G (C 11 -C 14 ) and DHP-GS (C 21 -C 24 ). The antibacterial experiments showed that the fractions with lower molecular weight had relatively strong antibacterial activity. The ether-soluble fractions (C 12 of DHP-G and C 22 of DHP-GS) had strong antibacterial activities against E. coli and S. aureus . The C 12 and C 22 fractions were further separated by preparative chromatography, and 10 bioactive compounds (G 1 -G 5 and GS 1 -GS 5 ) were obtained. The overall antibacterial activities of these 10 compounds was stronger against E. coli than S. aureus . Compounds G 1 , G 2 , G 3 , and GS 1 , which had the most significant antibacterial activities, contained β-5 substructures. Of these, G 1 had the best antibacterial activity. Its inhibition zone diameter was 19.81 ± 0.82 mm, and the minimum inhibition concentration was 56.3 ± 6.20 μg/mL. Atmospheric pressure chemical ionisation mass spectrometry (APCI-MS) showed that the antibacterial activity of G 1 was attributable to a phenylcoumarin dimer, while the introduction of syringyl units reduced antibacterial activity.

Bio-inspired borate cross-linked pulp foam (PF) with high porosity and low density can be widely used in many fields. However, PF is flammable, and lack of mechanical strength and antibacterial activity. To solve these issues, an ultra-strong PF was prepared by incorporation of chitosan and cationic polyacrylamide (CPAM). Results showed that the obtained PF exhibited highly improved mechanical properties (the compressive strength (485 kPa at a strain of 50%) was over 6 times higher compared with the borate cross-linked PF without chitosan and CPAM, and it was even higher than most of the reported cellulose-based porous materials). Also, the prepared PF has good performance on fire-retardance (hard to light), thermal insulation, antibiosis and sound absorption, due to the synergistic actions of borate, chitosan and CPAM. Additionally, spent liquor in preparing PF could be fully recycled, and thus this sustainable approach has potential for large-scale production of high-performance PF., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The conjugation between drug and biopolymers through an easily hydrolysable bond such as ester linkage, disulfide linkage, or imine-bond have been extensively employed to control the drug release pattern and improve its bioavailability. This work described the conjugation of 9-aminoacridine (9-AA) to Gum Arabic (GA) via Schiff's base, as a pH-responsive bond. First, GA was oxidized to Arabic Gum dialdehyde (AGDA), then a different amount of 9-AA (10, 25, and 50 mg 9-AA) was coupled to defined amount of AGDA, the coupling was confirmed by elemental analysis and different spectroscopic tools. In addition, the physical features of Schiff's base conjugates including surface morphology, thermal stability, and crystalline structure were examined. The thermogravimetric analysis revealed that the incorporation of 9-AA slightly improved the thermal stability. The coupling of 9-AA to AGDA dramatically enhanced its in vitro antimicrobial and antitumor activities. All conjugates exhibited broad-spectrum activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Bacillus subtilis, and Candida albicans. Moreover, AGA 25 and AGA 50 demonstrated promising capability to suppress the proliferation of human colon cancer cell line (Caco-2), with IC 50 190.10 and 180.80 μg/mL respectively., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Bacterial infectious diseases are serious health problem which extends to economic and social complications. Moreover, bacterial antibiotic resistance, lack of suitable vaccine or emergence of new mutations is forcing the development of novel antimicrobial agents. The objective of this study is to synthesize and characterize star-like zinc oxide nanoparticles for the application of antibacterial activities in cellulose based hygiene products. ZnO NPs were in situ synthesized via precipitation method on the surface of cellulose fibers. Since bactericidal activity of nanoparticles in part depends on the concentration in the growth medium, various amount of ZnO was incorporated into cellulose matrix ranging from 1 to 3 wt%. Microscopic (TEM, SEM) and spectroscopic (FT-IR, XRD) methods were utilized to investigate the final products. The infrared absorption spectra analysis supported by theoretical finding that during the reaction, ZnO nanoparticles could be bonded with cellulose fibers via hydrogen bonding. The yield of functionalization was determined through thermogravimetric analysis. Collected data proved the successful functionalization of the cellulose fibers with nanoparticles. Static contact angle measurements were carried out showing absorptive character of as prepared fabrics. All the samples were tested for the antibacterial properties and the results were compared to the samples prepared from the pristine cellulose fibers. Moreover, mechanical tests were performed revealing that the addition of only 2 wt% of the nanofiller boosted tensile, tearing and bursting strength by a factor of 1.6, 1.4 and 2.2 in comparison to unfunctionalized paper sample, respectively. Fabricated fabric presenting high hydrophilicity and antibacterial properties have gained increased applications in fabric industry, including hygiene product industry and hence the result of this study would be a welcomed option., (© 2022. The Author(s).)

In the experiment, a chemical oxidation method was used to prepare nano-divalent silver oxide powder with a particle size of about 10 nm. Compared with silver nanoparticles and monovalent silver compounds, nano‑silver oxide has better antibacterial properties. The cellulose antibacterial aerogel was prepared by combining it with cellulose nanofibrils and using freeze-thaw cycles and freeze-drying methods. The microscopic morphology, mechanical properties, in vitro release of silver ions, antibacterial properties and biodegradability of composite aerogels were studied. The porosity of the cellulose antibacterial aerogel can reach 94%, the swelling rate was greater than 1000%, and the pore size was between 13 and 15 nm, which showed a larger storage space and attachment site for the aerogel. The diameter of the inhibition zone of the aerogel against Escherichia coli and Staphylococcus aureus was 23 mm and 20 mm respectively, and the aerogels still exhibited significant antibacterial activities with more than 99.5% reductions in Escherichia coli and Staphylococcus aureus, which shows highly effective antibacterial properties. This research proposes an economical and novel preparation method of antibacterial cellulose aerogel, making it a candidate material with high efficiency, broad-spectrum antibacterial and more suitable for life needs., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Hydrogel dressings with similar structural characteristics to the extracellular matrix and tunable physicochemical properties have become promising candidates for wound healing. However, the fabrication of an ideal hydrogel dressing with low-cost, good biocompatibility, excellent hemostatic capacity, potent and broad-spectrum antibacterial activity remains a huge challenge. Herein, a lignocellulose-based nanocomposite hydrogel (ATC/SA/PVA) is fabricated by simply mixing Ag nanoparticles loaded, tannic acid-decorated lignocellulose nanofibrils with sodium alginate and polyvinyl alcohol. Based on the dynamic borate ester bonds and multiple weak hydrogen bonds, the fabricated hydrogel exhibits excellent flexibility and self-healing performance. Its highly porous structure endows the gel excellent blood and tissue exudates absorption ability. Interestingly, the release behavior of Ag nanoparticles from hydrogel displays pH dependence, which can facilitate the accumulation of Ag nanoparticles at the wound site, thereby accelerating the process of wound healing. In vitro antibacterial assay demonstrates the potent antibacterial ability of hydrogel against both Gram-positive (S. aureus) and negative bacteria (E. coli). More importantly, in vivo investigations reveal that such hydrogel can effectively accelerate tissue regeneration and wound healing with no obvious adverse effects. All these results suggest that this nanocomposite hydrogel would be a promising candidate to accelerate wound healing., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A lignin-based PU coating was prepared for paper-based green packaging. Two representative diisocyanate were used to prepare the coatings. Due to the rigid aromatic, the physical properties of the TDI system reached the maximum below the lignin content of 40%. The HDI that contains flexible aliphatic chains alleviated the brittleness of coating, and it showed physical advantages when the lignin content was more than 50%. Owing to the high lignin content, the coating presented enhanced thermal stability. After coated with the lignin-based PU coatings, the dry tensile strength of coated paper was improved by 126%. Amazingly, the wet strength was increased from 0.31 to 12.6 MPa with an improvement nearly 40 times. Based on the coordination of lignin, Ag + was introduced into the PU matrix, which imparted the coating with excellent antibacterial ability. The colony forming units of E. coli and S. aureus were both less than 1. However, no inhibition halo was observed, which indicated that the Ag was firmly anchored on the coating and the antibacterial ability is only available when the bacterial contact the coating surface. The lignin-based PU coating with favorable sustainability and properties shows great potential in paper-based green packaging fields., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This work demonstrated a facile and sustainable approach to functionalize cellulose nanopaper (CNP) by impregnation of chitosan (CS) and the followed halogenation. It was found that the tensile strength of the functionalized CNP (CNP/CS-Cl) was enhanced by 38.3% and 512.6% at dry and wet conditions, respectively. Meanwhile, the total transmittance (at 550 nm) of CNP/CS-Cl was increased from 75% of pure CNP to 85%, with 35% decrease in optical haze. Moreover, the CNP/CS-Cl exhibited significant enhancement in barrier properties. Importantly, part of the amino groups on CS were transformed into N-halamines during the halogenation process, which endowed the CNP/CS-Cl with excellent antibacterial performance against both S. aureus and E. coli with 100% bacterial reduction after 10 min of contact. Thus, this work provides a simple and efficient approach to functionalize CNP with water resistance, high transparency, excellent antibacterial and barrier properties, which will expand the potential applications of CNP., (Copyright © 2021 Elsevier Ltd. All rights reserved.)