Search

Objective: Gastric cancer (GC) is a malignant tumor rooting in the gastric mucosal epithelium, ranking the first among various malignant tumors. Therefore, the influence of microRNA-128-3p (miR-128-3p) by regulation of Tuftelin1 (TUFT1) on GC cells was investigated. Methods: The expression levels of miR-128-3p and TUFT1 in GC tissues and cells were detected. The correlation between miR-128-3p expression and overall survival of GC patients was analyzed. Human GC cells MGC803 were transfected with miR-128-3p or TUFT1-related oligonucleotides to figure their roles in viability, apoptosis, invasion, as well as epithelial-mesenchymal transition (EMT). The relationship between miR-128-3p and TUFT1 was validated. Results: miR-128-3p expression was low and TUFT1 expression was high in GC tissues. miR-128-3p expression was positively correlated with the overall survival of patients with GC. miR-128-3p targeted TUFT1. Up-regulated miR-128-3p or suppressed TUFT1 repressed viability, invasion, and EMT, and accelerated apoptosis of GC cells. Overexpressed TUFT1 reduced miR-128-3p-mediated growth inhibition of GC cells. Conclusion: The study stresses that miR-128-3p can inhibit TUFT1 expression, thereby repressing GC cell activities. [ABSTRACT FROM AUTHOR]

Insulated gate bipolar transistor (IGBT) module is one of the most prone-to-fail components in the wind power converter (WPC). The reduction of the junction temperature swing by thermal management can improve the reliability of a WPC. Due to the lack of an applicable selection criterion, not many studies on the control target of junction temperature swing were reported. This article proposes a thermal management strategy to find the control target of junction temperature swing. The proposed strategy considers the return on investment (ROI) of thermal management as a quantitative indicator to guide the control target selection. The selected control target enables optimal benefit of the thermal management. Results show that a 1% increase in the total harmonic distortion would extend the lifetime of IGBT module by 0.144 years. Success of the proposed scheme lies in the efficient regulation of the junction temperature swing. Case studies with different mission profiles and experimental tests on a three-phase two-level inverter are presented to validate the proposed method. [ABSTRACT FROM AUTHOR]

Multi-terminal modular multilevel converter (MMC) power transmission is the current development trend in DC transmission. However, owing to its fast control and dynamic characteristics, it may interact with the other inductive devices or the grid and cause stability issues. This paper describes the use of the impedance analysis method in the frequency domain to analyze system stability. First, the multi-harmonic linearization method is used to model the impedance of a three-terminal MMC system. To make the model more accurate, the modeling considers the effect of frequency coupling caused by an asymmetric controller and the AC sampling site position. This paper then proposes an equivalent method of the grid impedance for the three-terminal system that can accurately judge the stability of the grid-connected system when the AC side is coupled. This work provides a theoretical basis for the prediction and suppression of the oscillation of MMC grid-connected system with coupling on the AC side. Finally, a three-terminal MMC model is built in Matlab/Simulink and the Nyquist stability criterion is used to verify the correctness of the analysis. [ABSTRACT FROM AUTHOR]

Cardiomyocyte hypertrophy is the adaptive response of the heart to various physiological or pathological stresses. To combat this type of disease, more effective drugs are still needed. Wedelolactone is the main ingredient extracted from the medicinal plant Daylily and have effects such as immunomodulatory, anti-fibrosis, and anti-inflammation. However, the role and mechanism of Wedelolactone in myocardial hypertrophy are still unclear. Here, H9C2 cells were treated with Ang II to construct a cardiomyocyte hypertrophy cell model. We found Wedelolactone suppressed the survival of Ang II-induced cardiomyocytes. Wedelolactone further restrained the progression of Ang II-induced cardiomyocyte hypertrophy. Wedelolactone suppressed the oxidative stress of Ang II-induced cardiomyocytes, and restrained the apoptosis. Mechanically, Wedelolactone restrained the progression of Ang II-induced cardiomyocyte hypertrophy via Nuclear factor erythroid 2-related factor 2/Heme oxygenase-1 pathway (Nrf2/HO-1 pathway). In summary, Wedelolactone attenuates angiotensin II-induced hypertrophy and apoptosis in cardiomyocytes. Wedelolactone attenuates angiotensin II-stimulated hypertrophy and apoptosis in cardiomyocytes. [ABSTRACT FROM AUTHOR]

Drought stress, a major abiotic stress, significantly affects wheat (Triticum aestivum L.) production globally. To identify genes and metabolic pathways crucial for responding to short-term drought stress, we conducted transcriptomic and metabolomic analyses of winter wheat cultivar Jimai 418 at four developmental stages: jointing (GS31), booting (GS45), anthesis (GS65), and 8 days after anthesis (DAA8). Transcriptomic analysis identified 14,232 differentially expressed genes (DEGs) under drought stress compared to the control. Specifically, 1387, 4573, 7380, and 892 DEGs were identified at the four developmental stages, respectively. Enriched pathways associated with these DEGs included plant hormone signal transduction, mitogen-activated protein kinase (MAPK) signaling, galactose metabolism, and starch and sucrose metabolism. Totals of 222, 633, 358, and 38 differentially accumulated metabolites (DAMs) were identified at the four stages, respectively. Correlation analysis of both datasets revealed DEGs and DAMs associated with plant hormone signal transduction, arginine and proline metabolism, ABC transporters, and amino acid biosynthesis. These findings offer significant insights into Jimai 418's molecular response to short-term drought stress. The identified DEGs, DAMs, and enriched pathways contribute to our understanding of wheat drought tolerance. This research will facilitate further investigations into drought tolerance mechanisms and guide the breeding of wheat varieties with enhanced drought resistance. [ABSTRACT FROM AUTHOR]

• The limitation of the recent control methods (FCIN and FCOUT) are analyzed by analytical expressions. • The proposed method greatly improves the system stability, since it overcomes the limitation that the recent control methods do not consider the duty cycle perturbations. • The proposed method is simple and readily realized in the traditional control structure because it constructs an integrator and a high pass filter path outside the PLL. The interaction between the inverter and the grid in weak grids may produce resonances that lead to reduced power quality and instability concern. The recently proposed control methods based on eliminating disturbances in the control loop avoid the challenging control parameter design faced by the existing stability-enhancing control methods. They are effective to overcome the instability concern, but may not be able to maintain stable operation of the system in certain situations. Moreover, they affect the steady-state output current of the system under the fluctuation of the grid. This paper proposes a phase feed-forward method in the dq-frame to overcome the problems encountered by these control methods, such as duty cycle perturbation and grid phase jump. The proposed method constructs an integrator and a high pass filter path outside the PLL. It is simple and readily realized in the traditional control structure. Simulation and experimental results are presented to demonstrate the effectiveness of the proposed control method. [ABSTRACT FROM AUTHOR]

Drought stress is the main limiting factor to spring maize production in the North China Plain (NCP). However, amounts of soil water and precipitation evaporate unproductively during the long fallow season before sowing spring maize. Therefore, sub-surface plastic mulching (PM) and straw mulching (SM) were conducted to reduce evaporation following the harvest of the previous season's crop in this three-year study. PM resulted in less water evaporation during the fallow season compared with SM and the control without mulching (CK). Thus, more water was stored in the soil under PM. Similarly, evapotranspiration from sowing to the sixth-leaf stage (V6) in CK and SM was increased by 18.5–43.1% compared with PM. Conversely, evapotranspiration of PM was higher than that of CK and SM during the V6-silking period. During the grain filling stage, there was no significant difference in evapotranspiration among treatments owing to abundant rainfall. Correlation analysis indicated that excessive soil water used during the fallow season and seedling stage exacerbated the yield reduction. However, more water employed from V6 to silking increased yield. PM increased soil temperature during the seedling stage, thus accelerating spring maize growth, but without significantly affecting grain yield. PM could increase leaf area index, thus improving the biomass accumulation. Finally, the kernel setting rate was elevated under PM compared to CK and SM. Grain yield, water use efficiency (WUE), and annual WUE of PM were increased by 9.3–15.2%, 8.7–15.6%, and 16.7–25.8% relative to CK and SM, respectively. In conclusion, sub-surface plastic mulching stored water for spring maize growth and development, and enhanced water availability during the critical stage of water demand, thus increasing grain yield and WUE and reducing annual evapotranspiration. • Sub-surface plastic mulching (PM) reduced water use in fallow season. • PM can store more soil water for spring maize kernel setting around silking. • PM obviously increased spring maize yield and WUE and reduced annul ET. [ABSTRACT FROM AUTHOR]

Against the background of long-term climate change, quantifying the response of maize growth and development to climate change during critical growth stages will contribute to future decision-making in maize production. However, there have been few reports on the impact of climate change on maize dry matter accumulation and yield formation using long-term field trial data. In this study, field trial data from 13 agricultural meteorological stations in the Beijing–Tianjin–Hebei region from 1981 to 2017 were analyzed using partial correlation analysis and multiple regression models to investigate the effects of climate change on maize growth and yield. The results showed that the average temperature (Tavg) and accumulated effective precipitation (EP) during the maize growing season increased while the accumulated solar radiation (SRD) decreased from 1981 to 2017. During the seedling stage (GS1, VE-V8) and ear development stage (GS2, V8-R1), Tavg increased by 0.34 °C and 0.36 °C/decade, respectively, and EP increased by 1.83 mm and 3.35 mm/decade, respectively. The significant increase in Tavg during GS1 was the main reason for the inhibitory effect of climate change on maize growth, development, and biomass accumulation. However, the increase in SRD during the grain formation stage (GS3, R1–R3) and grain filling stage (GS4, R3–R6) was favorable for yield formation, increasing the grain number per ear (GN) and grain weight (GW) by 5.00% and 2.84%, respectively. SRD significantly increased after the silk stage, partially offsetting the adverse effects of temperature on maize yield formation, but the final result was a 0.18% and 0.94% reduction in maize plant dry weight (TDW) and grain yield (GY), respectively, due to the combined effects of the three climate factors. Spatially, climate change mainly had a negative impact on maize in the eastern and western parts of the central region of Beijing–Tianjin–Hebei, with a maximum GY reduction of up to 34.06%. The results of this study can provide a scientific basis for future decision-making in maize production against the background of climate change. [ABSTRACT FROM AUTHOR]

• A quasi-online condition monitoring technique for wind power converter is proposed. • This method enables concurrent health monitoring of power module and cooling system. • This approach does not need to measure the power loss and junction temperature. The power converter plays an important role in the energy conversion and management of wind turbine system. It is one of the core components in the system, but also one of the most prone to fail components according to industry-wide survey. Condition monitoring of power converter can improve the reliable operation of wind turbine system and reduce its unscheduled downtime. In this paper, a novel quasi-online monitoring technique based on the time-constants of heat sink temperature is proposed to check the health status of wind power converter. Advantages of the proposed technique include: (1) This approach enables the monitoring of power module degradation and cooling system deterioration in the converter simultaneously. (2) This method does not need to measure the junction temperature and power loss which reduces the cost and complexity of operation. Experimental tests were conducted to verify the effectiveness of this technique. Results also indicate that the maximum coefficient of variation of time-constants is below 1.7% under different converter operating conditions and ambient temperatures. In addition, the maximum error of time-constants in the application of condition monitoring is less than 3.1%. [ABSTRACT FROM AUTHOR]

The increase in wind power penetration leads to the risk of energy supply interruption in integrated electricity‐heat energy systems (IHES). This paper presents an analytical‐based approach for the efficient operational reliability evaluation of the IHES. The wind power distribution characteristic model considering correlation is constructed based on Hidden Markov Model (HMM). To reduce computational complexity, a critical system state identification (CSSI) method is proposed that characterises both random device failures and wind power uncertainty. Under each critical system state, the analytical function relationship between the reliability index and the uncertainty factors is established based on the virtual stochastic response surface (VSRS) method. The analytical function can directly calculate the reliability index when the wind power output varies, avoiding a large number of repeated calculations of the optimal load‐shedding model of the system and reducing the time required for reliability assessment. This allows the operator to evaluate the operational reliability of the integrated energy system in real‐time. The numerical simulation of the test system combining the IEEE 33‐node distribution system and the existing 28‐node heating system proves the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Phased warming in late winter and early spring can increase winter wheat grain yield. However, the effects of different durations of warming during this period on winter wheat grain yield and quality are not yet clear. Therefore, this study conducted field warming experiments in a movable polyethylene greenhouse during the late winter and early spring stages of the three wheat growing seasons from 2019 to 2022. The results showed that the accumulated growing degree days (GDD) of the warming treatment during the warming period were increased by 87.3–215.7 °C d compared to the control (CK). The warming treatment advanced and prolonged the duration of vegetative growth and spike differentiation after regreening, promoted spike and flower development, and increased grain length, grain width, and grain area. During the three growing seasons, the longer the warming duration (WD) of the warming treatment, the more obvious were the observed promoting effects on the kernel number per spike and 1000-kernel weight. From 2019 to 2021, compared to the CK, the spike number per unit area and grain yield of the warming treatments increased with the prolongation of WD. However, in the 2022 growing season the spike number per unit area and grain yield of the warming treatment were increased with longer WD, reaching the maximum at WD of 56 days and then gradually decreasing with longer WD. Compared to CK, the grain protein content, wet gluten content, and sedimentation value of the warming treatment decreased with the prolongation of WD. The promotion effect of longer WD on grain starch content and protein yield was more significant. In summary, the accumulated GDD during the warming period compared to CK was 155.8–181.2 °C d, and at WD of 50–56 days a relatively higher grain yield and protein yield could be obtained. [ABSTRACT FROM AUTHOR]

With the widespread application of lithium-ion battery packs, it calls for efficient balancing methods to improve the performance of these battery systems. The relevant research has focused on the design of equalization circuits and control strategies while neglecting quantitative analysis and comparison of battery active equalization structures from the systematic level. In this paper, we propose an improved system-theoretic modeling approach for active equalization structures that takes into account the battery's constraints, including equalization current rate and SOC operation range. Accordingly, the mathematical models of various active equalization structures are derived that can describe their equalization dynamic behavior. Then, the analytical algorithms are developed to estimate the balancing time of active equalization structures online. Finally, extensive numerical simulations are conducted to evaluate and compare the average performance of these equalization systems in term of equalization time. It then comes up with a comprehensive comparison among them. Consequently, the Multicell-to-Multicell (MC2MC) balancing structure benefits the fast balancing speed and the lowest sensitive to initial batteries’ SOCs. The global structure has the lowest implementation cost and the series structure benefits the simplest control. Moreover, the module-based structures have faster balancing speed when each module contains about 4–6 batteries. [ABSTRACT FROM AUTHOR]

This letter proposes an indirect power dissipation level short circuit protection (IPDL-SCP) method for silicon carbide (SiC) metal-oxide semiconductor field-effect transistors (mosfets). Due to differences between normal conducting and short-circuit (SC) conditions, this method is triggered by the voltage oscillation vss at the parasitic inductance (Lss) of the source and directly monitoring vds of SiC mosfet. For verification, the short circuit protection circuit is tested and proved functional on the SC test bench. Experimental results show that the protection circuit can respond to both hard switching fault (HSF) and fault under load (FUL), while the fastest response delays are 75 ns for HSF and 170 ns for FUL. Comparisons with other commonly used SC protection methods have also been made, which show that the proposed IPDL-SCP method has better performance in shorter protection delays. [ABSTRACT FROM AUTHOR]

Due to global warming, high temperature stress severely impacts maize growth and development, especially during the early filling stage. Supplemental irrigation is an effective measure to mitigate high temperature stress in maize. However, the underlying mechanism for alleviating transient high temperature stress during the early grain-filling stage is still unclear. A two-year field experiment involving high temperature during the early filling stage (HT), supplemental irrigation under high temperature stress (HTW), supplemental irrigation under control condition (W), and control treatment (CK) by using heat-tolerant variety ZD958 and heat-sensitive variety XY335 was conducted. Compared with the CK treatment, the HT treatment significantly decreased the activities of superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT). HT also significantly reduced the Pn, soluble sugar content in stem, and dry matter accumulation, thus reducing kernel number per ear and yield by 11.2–17.6% and 23.4–23.7% in the both variety, respectively. However, compared with HT, the HTW treatment reduced the daily mean canopy temperature of ZD958 and XY335 by 2.6 °C and 2.8 °C, respectively. Accordingly, HTW increased SPAD value, photosynthetic performance, starch and soluble sugars content in stems and leaves, and antioxidant enzymes activities, but reduced the malondialdehyde (MDA). Moreover, HTW increased the grain sink capacity, prolonged the effective filling days by 1.4–6.5 d, and increased the average filling rate by 14.8–41.0% compared with HT. Finally, grain yield of HTW was increased by 15.8–22.3% compared with HT. Therefore, supplemental irrigation could effectively enhanced maize heat resistance by reduce canopy temperature. This study provides important insights into enhancing maize resistance and yield stability under a warming climate. • Supplemental irrigation (SI) reduced the canopy temperature under heat stress (HT). • SI improved the antioxidant defense of maize under HT. • SI improved the photosynthesis and assimilate accumulation under HT. • SI increased assimilates availability thus improving kernel number per ear and yield. [ABSTRACT FROM AUTHOR]

Gate-oxide degradation has been one of the critical reliability concerns of silicon carbide (SiC) metal–oxide–semiconductor-field-effect transistors (mosfets), which could be monitored through aging-sensitive parameters. In this article, an online gate-oxide degradation monitoring method for planar SiC mosfets is proposed by extracting gate charge time at a specific range of gate voltage. It is based on the findings that the input capacitances of planar SiC mosfets change significantly over gate-oxide degradation, which is theoretically analyzed and experimentally verified. The capacitance variations are converted into the gate charge time as the new aging-sensitive parameter. The new parameter measurement circuit is proposed and integrated into the gate driver module. The article results indicate that the new parameter varies noticeably with gate-oxide degradation and the difference of this parameter caused by junction temperature is much smaller than that caused by degradation. Besides, the parameter is immune to package degradation and load current. The condition monitoring method can be implemented online since the parameter is extracted during the off-state of SiC mosfet devices, which does not affect normal operation. The confirmatory experiment is carried out to verify the correctness of the proposed method. [ABSTRACT FROM AUTHOR]

The survival benefit for patients with gastric cancer (GC) is modest due to its high transfer potential. Targeted therapy for metastasis-related genes in GC may be a viable approach, however, inhibitors specifically targeting GC are limited. In this study, GC patient-derived xenografts (PDX) with metastatic burden were established via orthotopic transplantation. PCR-Array analysis of primary and metastatic tumors revealed EPH receptor B2 (EPHB2) as the most significantly upregulated gene. The interaction between the EPHB2 receptor and its cognate-specific EFNB1 ligands was high in GC and correlated with a poor prognosis. Fc-EFNB1 treatment increased the invasion and migration abilities of GC cells and induced a high EPHB2 expression. EPHB2 knockdown in GC cells completely abolished the ephrin ligand-induced effects on invasion and migration abilities. Signal transduction analysis revealed Wnt/β-catenin and FAK as downstream signaling mediators potentially inducing the EPHB2 phenotype. In conclusion, the observed deregulation of EPHB2/EFNB1 expression in GC enhances the invasive phenotype, suggesting a potential role of EPHB2/EFNB1 compound in local tumor cell invasion and the formation of metastasis. [Display omitted] • EPHB2 and EFNB1 are co-expressed in gastric cancer cells and tissues. • The interaction between EPHB2 and EFNB1 significantly promoted gastric cancer metastasis. • EPHB2/EFNB1 compounds are potential indicators for the diagnosis of gastric cancer metastasis. [ABSTRACT FROM AUTHOR]

Background: Upland Cotton (Gossypium hirsutum L.) has few cotton varieties suitable for mechanical harvesting. The plant height of the cultivar is one of the key features that need to modify. Hence, this study was planned to locate the QTL for plant height in a 60Co γ treated upland cotton semi-dwarf mutant Ari1327. Results: Interestingly, bulk segregant analysis (BSA) and genotyping by sequencing (GBS) methods exhibited that candidate QTL was co-located in the region of 5.80–9.66 Mb at D01 chromosome in two F2 populations. Using three InDel markers to genotype a population of 1241 individuals confirmed that the offspring's phenotype is consistent with the genotype. Comparative analysis of RNA-seq between the mutant and wild variety exhibited that Gh_D01G0592 was identified as the source of dwarfness from 200 genes. In addition, it was also revealed that the appropriate use of partial separation markers in QTL mapping can escalate linkage information. Conclusions: Overwhelmingly, the results will provide the basis to reveal the function of candidate genes and the utilization of excellent dwarf genetic resources in the future. [ABSTRACT FROM AUTHOR]

In order to further improve the efficiency of dual-active-bridge (DAB) converter, a hybrid five-variable modulation scheme with minimal root mean square (rms) current is proposed in this article, which combines the traditional phase-shift and pulsewidth modulation schemes. By adopting the proposed optimal scheme, a wider zero-voltage switching (ZVS) operation range and lower rms current level are achieved simultaneously when compared with other modulation schemes, which significantly improves the efficiency of the DAB converter. Moreover, for the complexity of the proposed modulation scheme with five variables, the Fourier decomposition based analytical expressions are derived for the converter and a generalized performance analysis results are presented. Besides, in order to avoid the analysis error, especially at light-load condition, the optimization strategy takes the rms current as the optimal objective, which includes the eight harmonic component of the inductor current rather than just considers the fundamental component. And an offline particle swarm optimization algorithm is introduced to acquire the optimal operating points for the whole power range. To substantiate the effectiveness of the proposed modulation scheme, a comprehensive comparison among related works in terms of the rms value and ZVS range were carried out under various operation condition. Finally, a 1.2 kW experimental platform was built and the highest experimental efficiency under the proposed modulation scheme reaches 96.8%. [ABSTRACT FROM AUTHOR]

In this article, an online condition monitoring (CM) method is proposed for the bond wire degradation of insulated-gate bipolar transistor (IGBT) modules in a single-phase or three-phase three-level neutral-point-clamped (3LNPC) dc–ac, ac–dc converter. The proposed method has the ability to detect the whole IGBTs in a 3LNPC converter, based on finding the idle on-state IGBTs under the specific load current direction and switching sequence of a leg. The detection time is short (0.2 ms) and the influence of online CM on load current can be completely neglected as long as the insertion areas for CM test are chosen reasonably. Meanwhile, an advanced bond wire CM module is designed to conduct the CM test. This module can generate and inject the current pulse trains into IGBT modules, with the high current for CM test and low current for temperature-sensitive electrical parameter measurement, and sample the collector–emitter on-state voltage (VCE ON) stably and precisely. Finally, the experimental work was carried out to verify the effectiveness of the proposed method and the practicality of the developed CM module. [ABSTRACT FROM AUTHOR]

Gallium nitride (GaN) devices are widely used due to their excellent performance when integrated into power electronics applications. However, owing to their low parasitic parameters and fast switching speed, they are more prone to instability than the silicon devices. The sustained oscillation discussed in this article is one of the instability problems, which may result in overshoot or even more serious device breakdown; thus, it is pretty necessary to suppress it effectively in practical applications. It is the first time to adopt an RC snubber to suppress the sustained oscillation in this article, which is very simple and cheap but effective. First, the sustained oscillation modeling based on a double pulse circuit is carried out. Then, the RC region is established quantitatively according to the root locus analysis results, which makes up for the defects of these qualitative methods before. Furthermore, it is first found that the sustained oscillation can be fully suppressed due to the existence of dipoles. Finally, the oscillation suppression effect within the RC region is compared with that outside the region by the simulation and experimental results, which are consistent with the theoretical analysis. Additionally, the possible negative influence of the added RC snubber is also discussed in this article, which shows that it has a little impact on the switching speed and energy loss, while the sustained oscillation is well suppressed. [ABSTRACT FROM AUTHOR]

• The relationship between the operating points, solar irradiance and cell temperature is analyzed. • A multivariable small signal admittance model considering the solar irradiance and cell temperature is built. • In order to analyze the PV system stability with the model, a novel stability analysis method is proposed. The method can obtain the system stability under all operating points at a time, whereas current analysis methods do not. • More accurate stability results are obtained due to consideration of PV cell temperature. In recent years, solar photovoltaic (PV) power technology has been applied widely. The interaction between the PV generator and the grid, however, may cause the stability issue and oscillation in practical applications. Hence it is very important to analyze the stability of grid-connected PV system. Due to the fluctuation of solar irradiance, the operating characteristics of the grid-connected system alter, and the grid-connected system shows different stability at the altered operating points. Therefore, it is vital to analyze the grid-connected PV system stability at all operating points in the entire operation range. The impedance-based analysis method is a useful tool for stability analysis of the system. However, since the operating point of the system often alters continuously, it is difficult to use conventional impedance/admittance model to characterize the system performance. To overcome this drawback, this paper attempts to incorporate the solar irradiance into the conventional PV generator admittance model and develops a multivariable small signal admittance model for PV generator. Moreover, the PV cell temperature influence is also considered in the model. Further, a new analysis method is proposed to enable the stability analysis. Simulation and experiment were conducted to demonstrate the effectiveness of the model and the stability analysis method. [ABSTRACT FROM AUTHOR]