Search

Biodegradable blends based on plasticized poly(lactic acid) PLA and thermoplastic starch (TPS) have been obtained. The influence of the PLA plasticizer as a compatibility agent has been studied by using two different plasticizers such as neat oligomeric lactic acid (OLA) and functionalized with maleic acid (mOLA). In particular, the morphological, thermal, and mechanical properties have been studied as well as the shape memory ability of the melt-processed materials. Therefore, the influence of the interaction between different plasticizers and the PLA matrix as well as the compatibility between the two polymeric phases on the thermally-activated shape memory properties have been studied. It is very interesting to use the same additive able to act as both plasticizer and compatibilizer, decreasing the glass transition temperature of PLA to a temperature close to the physiological one, obtaining a material suitable for potential biomedical applications. In particular, we obtain that OLA-plasticized blend (oPLA/TPS) show very good thermally-activated capability at 45 °C and 50% deformation, while the blend obtained by using maleic OLA (moPLA/TPS) did not show shape memory behavior at 45 °C and 50% deformation. This fact is due to their morphological changes and the loss of two well-distinguished phases, one acting as fixed phase and the other one acting as switching phase to typically obtain shape memory response. Therefore, the thermally-activated shape memory results show that it is very important to make a balance between plasticizer and compatibilizer, considering the need of two well-established phases to obtain shape memory response. [ABSTRACT FROM AUTHOR]

In this work, using supramolecular polyurethanes theories, two polycaprolactone-based polyurethanes with 2-ureido-4-[1H]-pyrimidinone (UPy) motifs capable of forming quadruple hydrogen bonds were synthetized and characterized, focusing our attention on their capability to show thermally activated shape-memory response. In particular, 1H NMR analyses confirmed the chemical structure of the supramolecular polyurethanes, while DSC showed their totally amorphous morphology. DMTA in tensile mode was used to study their thermally activated shape-memory properties. In our case, the UPy units are the switching domains while the network formed by the segregated hard segments is the permanent domain obtained materials with excellent shape-memory response at both 100 and 85 °C. These materials are promising for multi-responsive materials where bio-based and potentially recyclable polymers with excellent shape-memory properties are needed. [ABSTRACT FROM AUTHOR]

Within bioplastics, natural poly(3‐hydroxybutyrate) (PHB) stands out as fully biocompatible and biodegradable, even in marine environments; however, its high isotacticity and crystallinity limits its mechanical properties and hence its applications. PHB can also be synthesized with different tacticities via a catalytic ring‐opening polymerization (ROP) of rac‐β‐butyrolactone (BBL), paving the way to PHB with better thermomechanical and processability properties. In this work, the catalyst family is extended based on aluminum phenoxy‐imine methyl catalyst [AlMeL2], that reveals efficient in the ROP of BBL, to the halogeno analogous complex [AlClL2]. As well, the impact on the ROP mechanism of different initiators is further explored with a particular focus in dimethylaminopyridine (DMAP), a hardly studied initiator for the ROP of BBL. A thorough mechanistic study is performed that evidences the presence of two concomitant DMAP‐mediated mechanisms, that lead to either a DMAP or a crotonate end‐capping group. Besides, in order to increase the possibilities of PHB post‐polymerization functionalization, the introduction of a side‐chain functionality is explored, establishing the copolymerization of BBL with β‐allyloxymethylene propiolactone (BPLOAll), resulting in well‐defined P(BBL‐co‐BPLOAll) copolymers. [ABSTRACT FROM AUTHOR]

The replacement of fossil-derived plastics with those obtained from bio-based resources, which present suitable performance to be employed as commodity plastics is currently an important field of research, given the urgent need to transition from a fossil-based to a more sustainable economy. In this context, this work is focused on the application of a catalytic system based on silsesquioxane-cyclopentadienyl titanium complexes for the preparation of bio-based polymers, which can be used as additives to improve the poor material properties of a biodegradable polymer such as poly(lactic acid) (PLA). These titanium complexes, when activated with methylaluminoxane or with triflate salts, are shown to be capable of the polymerization of two bio-based monomers: myrcene and anethole. It is notable that polymerizations with these two distinct monomers take place through different mechanisms. The resulting polymyrcene (PMy) and polyanethol (PAN) have been applied as modifiers for PLA. Binary blends of PMy and PLA exhibited a considerable decrease in T g and the promotion of PLA crystallization for a PMy content below 15 wt%. The mechanical properties of the PLA/PMy blends also displayed plasticization, with a decrease in the elastic modulus and enhanced plasticity, which resulted in less fragile systems compared to pure PLA. Morphological analysis has indicated a partially miscible, phase-separated system with micron-sized domains. In contrast, PAN completely inhibited PLA crystallization and the PLA/PAN blends were immiscible, but well-dispersed, a phase-separated system was obtained in solvent-casting film preparation with very small PAN domains. The blends showed higher tensile modulus than pure PLA and an absence of plastic behaviour, resulting in more fragile systems upon the addition of PAN to PLA. [Display omitted] • Polymerization of bio-based monomers (myrcene and anethol) using titanium catalysts is presented. • The bio-based polymyrcene and polyanethol obtained, were used as modifiers for poly(lactic acid) (PLA). • It was found that polymyrcene acts as a plasticizer, reducing the fragility of pure PLA. • However, polyanethol completely inhibits PLA crystallization. [ABSTRACT FROM AUTHOR]

Two non-toxic potassium compounds, 1 and 2, with a commercial oximate ligand have been prepared and fully spectroscopically characterized. Their activity as catalysts for the ring-opening polymerization (ROP) process of LLA has been studied, showing that they are extremely active and able to polymerize the monomer in a few minutes. For derivative 2, the presence of a crown ether in the potassium coordination sphere affects the nuclearity of the compound and consequently its solubility, with both aspects having an influence in the polymerization process. Detailed studies of the polymerization mechanism have been performed, and an unusual anionic mechanism was observed in absence of a co-initiator. Indeed, the monomer deprotonation generates a lactide enolate, which initiates the polymerization propagation. On the contrary, when a 1:1 ratio of cat:BnOH is used, a mixture of mechanisms is observed, the anionic mechanism and the activated monomer one, while from a cat:BnOH ratio of 1:2 and over, only the activated monomer mechanism is observed. [ABSTRACT FROM AUTHOR]

Functional packaging represents a new frontier for research on food packaging materials. In this context, adding antioxidant properties to packaging films is of interest. In this study, poly(butylene adipate- co -terephthalate) (PBAT) and olive leaf extract (OLE) have been melt-compounded to obtain novel biomaterials suitable for applications which would benefit from the antioxidant activity. The effect of cellulose nanocrystals (CNC) on the PBAT/OLE system was investigated, considering the interface interactions between PBAT/OLE and OLE/CNC. The biomaterials' physical and antioxidant properties were characterized. Morphological analysis corroborates the full miscibility between OLE and PBAT and that OLE favours CNC dispersion into the polymer matrix. Tensile tests show a stable plasticizer effect of OLE for a month in line with good interface PBAT/OLE interactions. Simulant food tests indicate a delay of OLE release from the 20 wt% OLE-based materials. Antioxidant activity tests prove the antioxidant effect of OLE depending on the released polyphenols, prolonged in the system at 20 wt% of OLE. Fluorescence spectroscopy demonstrates the nature of the non-covalent PBAT/OLE interphase interactions in π-π stacking bonds. The presence of CNC in the biomaterials leads to strong hydrogen bonding interactions between CNC and OLE, accelerating OLE released from the PBAT matrix. [ABSTRACT FROM AUTHOR]

[Display omitted] • Raw lignin was modified through a green and scalable reactive extrusion design. • Lignin/poly(butylene adipate-co-terephthalate) biomaterials were melt processed up to 90 wt% bio-content. • Tough biomaterials were film blown and shopping bags were produced. • Mechanical recycling and composting were verified as end-of-life options. • Reactive design was industrially scaled-up in conventional twin screw extruder. [ABSTRACT FROM AUTHOR]