Search

In order to cope with the grid fluctuation caused by large‐scale wind power connected to the grid, the wind thermal power generation system has been proposed and extensively studied. The wind thermal power generation system uses a wind turbine to drive a heat generation device to heat the heat storage medium, which is further exchanged to drive a turbine to generate electricity. A superconducting magnetic eddy current heater (SMH) is proposed for the characteristics of wind thermal power generation system, which uses non‐resistive, large current‐carrying superconducting coils for excitation, and has high output efficiency and power density. The working principle of magnetic eddy current heating is analysed, and the structure of SMH with no ferromagnetic material and two heating screens inside and outside is proposed according to the characteristics of SMH. An analytical model of the SMH is established, and the influence of the structure and materials of the SMH on the magnetic field distribution is analysed. Based on this, a 22‐pole SMH was designed and analysed for output power at 10–20 rpm. A three‐dimensional magnetism‐stress combined analysis model of SMH is established, and the strain and stress characteristics of SMH are simulated under the condition of maximum output power, which verifies the feasibility of the mechanical properties of existing superconducting materials for application in SMH. [ABSTRACT FROM AUTHOR]

An efficient visible-light photoelectrochemical photodetector based on a compact In-rich n-InGaN layer activated by p-Cu2O microcrystals operating as photoanode in the self-powered mode is demonstrated. The photocurrent density of 80 µA/cm2 under one-sun illumination is more than 10 times larger than that of a bare InGaN layer. Moreover, the photocurrent density, responsivity of 0.8 mA/W, specific detectivity of 4 × 109 Jones, and response times of 5–8 ms are more than five times better compared to those of our previously reported nanowire counterpart. The excellent performance is attributed to maximized photocarrier separation in the built-in electric field of the internal p–n junction for fully depleted Cu2O microcrystals with maximized height and the planar geometry, guaranteeing unhindered diffusion of the electrolyte to and from the photoanode surface. [ABSTRACT FROM AUTHOR]

The optimized design of a new high-temperature superconducting rotating pole machine is presented. Its main structural feature is the use of a double stator core which separates the synchronous machine pole shoe from the pole body to rotate separately as the machine rotor, allowing the superconducting coil to operate in a stationary state. The inner stator core, the stationary dewar and the rotor core together form the excitation system of the machine. The excitation coil windings adopt a rectangular cross-section, with flux divertor strategically placed between the high-temperature superconducting coils. This configuration aims to modulate the background magnetic field, specifically reducing the perpendicular magnetic field component. This mitigation minimizes the impact of ambient magnetic fields on the superconducting coil’s current carrying capacity, ensuring an optimized magnetic field environment for its operation. Through the integration of these modifications, the technical and economic parameters of the enhanced high-temperature superconducting machine have been significantly improved. The optimization of design, coupled with detailed calculations of the 3D electromagnetic field, was achieved utilizing the commercial software Ansys EM module. [ABSTRACT FROM AUTHOR]

Cancer-associated fibroblasts (CAFs) are the most abundant stromal cell population in breast tumors. A functionally diverse population of CAFs increases the dynamic complexity of the tumor microenvironment (TME). The intertwined network of the TME facilitates the interaction between activated CAFs and breast cancer cells, which can lead to the proliferation and invasion of breast cells. Considering the special transmission function of CAFs, the aim of this review is to summarize and highlight the crosstalk between CAFs and breast cancer cells in the TME as well as the relationship between CAFs and extracellular matrix (ECM), soluble cytokines, and other stromal cells in the metastatic state. The crosstalk between cancer-associated fibroblasts and tumor microenvironment also provides a plastic therapeutic target for breast cancer metastasis. In the course of the study, the inhibitory effects of different natural compounds on targeting CAFs and the advantages of different drug combinations were summarized. CAFs are also widely used in the diagnosis and treatment of breast cancer. The cumulative research on this phenomenon supports the establishment of a targeted immune microenvironment as a possible breakthrough in the prevention of invasive metastasis of breast cancer. [ABSTRACT FROM AUTHOR]

In recent years, perovskite solar cells have achieved high efficiency in small areas, but the industrialization of perovskite solar cells is still hampered by the efficiency loss of cells during area scaling. Series modules are currently the most widely used and effective modular process for perovskite solar cells, a process that requires the patterning of the layer stack in individual cells. This interconnection scheme consists of three lines, P1–P3, which are ablated using a pulsed laser beam. In this work, we developed an efficient perovskite module with a high geometric fill factor (GFF) based on a two-step spin-coating method by optimizing the laser ablation step. We constructed the entire device structure by means of a picosecond green pulsed laser, meanwhile, the dead area is greatly reduced by optimizing the parameters and process, and finally achieving an ultra-high GFF of over 99%. In addition, we investigated the effect of poor P2 and P3 ablation on the perovskite solar modules and compared the performance of the module before and after ablation optimization. We finally obtained a maximum photoelectric conversion efficiency of 22.79% with an aperture area of 12.6 cm2. Concurrently, we conducted electrocatalytic hydrogen production experiments on the prepared perovskite solar modules, and the experimental results have also shown excellent performance and good prospects. [ABSTRACT FROM AUTHOR]

Mandarinfish ranavirus (MRV), also known as a variant of largemouth bass virus (LMBV), is an emerging pathogen in mandarinfish aquaculture. In this study, monoclonal antibodies (mAbs) against MRV were produced and characterized, and 7 mAbs were obtained through Western blotting screening and all 7 mAbs specifically recognized MRV/LMBV but not several piscine iridoviruses as ISKNV, GIV and TFV. By LC MS/MS analysis, the recognized viral proteins by seven mAbs were identified as MRV‐pORF47L, MRV‐pORF55R, MRV‐pORF57L, MRV‐pORF77L and MRV‐pORF78L, respectively, and all five viral proteins are late expression structural proteins by Western blotting. Based on mAb 1C4, immuno‐histochemistry and immuno‐histo‐fluorescence were performed to re‐assess the tissue tropism of MRV. The result showed that abundant reactive signals were observed in infected spleen, kidney as well as intestine and pyloric caecum. Real‐time quantitative PCR also demonstrated that spleen as well as pyloric caecum and intestines are the major target tissue upon MRV infection. In infected intestines and pyloric caecum, numerous enlarged, multinucleated cells with intracytoplasmic inclusions were identified as the target cells of MRV, suggesting that MRV serves as a digestive tract pathogen to mandarinfish, which may explain why acute infection of MRV can cause the typical clinicopathology featured by severe ascites. [ABSTRACT FROM AUTHOR]

Background. Lung squamous cell carcinoma (LUSC) is characterized by poor prognosis and obvious limitations of therapeutic methods. The molecular target and mechanism of quercetin (QR), a natural anticancer product with extensive pharmacological activities, on lung squamous cell carcinoma is still unclear. Method. The effects of QR on LUSC were examined using cell proliferation, migration, and invasion tests. Key target genes were screened using The Cancer Genome Atlas (TCGA) database, Gene Ontology (GO)/Kyoto Encyclopedia of Genes and Genomes (KEGG) database, STRING website, topology, and prognosis analysis, molecular docking, and other bioinformatics methods for further analysis. Finally, the effects of QR on the expression of key targets in LUSC cells were detected using a cell cycle assay and western blotting. Results. Our study demonstrates that QR not only inhibits the proliferation of LUSC but also affects the invasion and metastasis of LUSC. After downloading and analyzing the TCGA database, 2150 differentially expressed genes were identified. PLK1, CDC20, and BUB1B were identified using enrichment analysis, topological network analysis, cluster analysis, and molecular docking screening. Subsequent experiments showed that QR could interfere with the cell cycle and downregulate the expression of the target gene PLK1 at the protein level. Conclusions. We found that QR not only inhibits the proliferation, migration, and invasion but also blocks the cell cycle progression of LUSC. QR downregulated the expression of the LUSC target gene PLK1 at the protein level. [ABSTRACT FROM AUTHOR]

Objective: This study compared the post-activation performance enhancement (PAPE) effects of a flywheel eccentric overload (FEOL) exercise and barbell half squats (BHS) on countermovement jump (CMJ) and 30 m sprint performance. Methods: Twelve male collegiate competitive basketball players were enrolled in this study and they implemented two training protocols: barbell half squat (BHS) and flywheel eccentric overload (FEOL) training. The BHS protocol included three intensities of load: low (40% 1RM), medium (60% 1RM), and high (80% 1RM), with each intensity consisting of 5 sets of 3 repetitions. The FEOL protocol included three inertia intensities: low (0. 015 kg∙m2), medium (0.035 kg∙m2), and high (0.075 kg∙m2), with each intensity consisting of 3 sets of 6 repetitions. The measurement time points were before training (baseline) and at 3, 6, 9, and 12 minutes after training. A two-stage (stage-I and stage-II) randomized crossover design was used to determine the acute effects of both protocols on CMJ and sprint performance. Results: At each training intensity, the jump height, jump peak power output (PPO), jump impulse and 30m sprint speed at 3, 6, 9, and 12 minutes after BHS and FEOL training did not change significantly compared to the baseline. A 2-way ANOVA analysis indicated significant main effects of rest intervals on jump height, jump PPO, and jump impulse, as well as 30m sprint speed. The interaction of the Time × protocol showed a significant effect on jump height between BHS and FEOL groups at high intensity in stage-I (F = 3.809, p = 0.016, df = 4) and stage-II (F = 3.044, p = 0.037, df = 4). And in high training intensity, the jump height at 3 (7.78 ± 9.90% increase, ES = 0.561), 6 (8.96 ± 12.15% increase, ES = 0.579), and 9 min (8.78 ± 11.23% increase, ES = 0.608) were enhanced in I-FEOL group compared with I-BHS group (F = 3.044, p = 0.037, df = 4). In stage-II, the impulse and sprint speed of the FEOL group were significantly higher than those of the BHS group at 6, 9, and 12 min under low (FEOL = 0.015kg∙m2, BHS = 40%1RM), medium(FEOL = 0.035kg∙m2, BHS = 60%1RM), and high (FEOL = 0.075kg∙m2, BHS = 80%1RM) intensities. Furthermore, the sprint speed of the two training protocols did not change at different time points. The interaction of Time × training intensity showed lower sprint speeds in the II-BHS group at a high intensity (BHS = 80%1RM) compared to low (BHS = 40%1RM) and medium (BHS = 60%1RM) training intensities, especially at 9 min and 12 min rest intervals. Conclusion: Although barbell half squat training and flywheel eccentric overload training did not provide a significant PAPE effect on explosive power (CMJ and sprint) in male basketball players, FEOL training showed a better potential effect on enhanced CMJ jump performance at the high training intensity. [ABSTRACT FROM AUTHOR]

With the continuous evolution of bacteria and the constant use of traditional antibiotics, the emergence of drug-resistant bacteria and super viruses has attracted worldwide attention. Antimicrobial therapy has become the most popular and important research field at present. Coordination Polymer (CP) and/or metal-organic framework (MOF) platforms have the advantages of a high biocompatibility, biodegradability, and non-toxicity, have a great antibacterial potential and have been widely used in antibacterial treatment. This paper reviewed the mechanism and antibacterial effect of three typical MOFs (pure Ag-MOFs, hybrid Ag-MOFs, and Ag-containing-polymer @MOFs) in silver-based coordination polymers. At the same time, the existing shortcomings and future views are briefly discussed. The study on the antibacterial efficacy and mechanism of Ag-MOFs can provide a better basis for its clinical application and, meanwhile, open up a novel strategy for the preparation of more advanced Ag-contained materials with antibacterial characteristics. [ABSTRACT FROM AUTHOR]

People can learn, understand, and use music using the solfeggio method. People involved in professional music training have given it importance because it is a fundamental discipline of enlightenment music and a necessary training method and technical theory course to enter the professional level. This article presents an in-depth analysis of the music curriculum model based on data mining technology. Additionally, a music style classification method based on FP Growth association rules mining is developed, which decreases the number of frequent element sets needed and speeds up database scanning. To better match the characteristics of music, a multirepetition structure model is used, and the MFCC (Mel-frequency cepstral coefficients) function is used to set the repetition structure model. The results demonstrate that the music style classification method put forth in this article has clear advantages in terms of efficiency: when the minimum support is 0.2 percent, this method's execution time is about 33 percent compared to the other methods. The outcomes of the experiment suggest that this method can more accurately capture the repeatability of music and enhance separation performance to some extent. [ABSTRACT FROM AUTHOR]

The amorphous formation ability, thermal properties, crystallization behavior, magnetic properties, resistivity and bending ductility of Fe 84.5- x B 12 P 2 C 1 Cu 0.5 Co x (x = 0, 4, 8) alloys were systematically investigated. It is found that the substitution of Fe by Co promotes the transformation of the as-spun alloys from a completely amorphous structure to an amorphous/nanocrystalline dual-phase structure, which is related to the differences in the interactions between the involved atoms. The saturation magnetization of alloys increases with increasing Co content and can be increased to 1.93 T at x = 8 by heat treatment, but excessive substitution of Co for Fe deteriorates the coercivity and bending ductility due to the pre-existing α-Fe(Co) grains. The resistivity is positively correlated with the disorder of structure, and the as-spun alloy with x = 4 exhibits a high resistivity of 136.2 μΩ cm. As a result, the annealed Fe 80.5 B 12 P 2 C 1 Cu 0.5 Co 4 alloy with excellent soft magnetic properties (M s = 1.81 T, H c = 7.8 A/m) and good bending ductility in combination with high resistivity has potential for application in the field of electronic devices. • The crystallization tendency of alloy is enhanced by the substitution of Fe by Co. • The annealed Co4 alloy exhibits an ultrafine nanocrystalline structure. • Co4 alloy combines excellent soft magnetic properties with high resistivity. • Co0, Co4 Alloys exhibit good bending ductility even when annealing at T x1 -60 K. [ABSTRACT FROM AUTHOR]

The occurrence of rainfall is the result of a combination of various meteorological factors. Traditional rainfall early warning models solely use Global Navigation Satellite System (GNSS)-derived Zenith Total Delay (ZTD) or Precipitable Water Vapor (PWV) to forecast rainfall, resulting in a low true detected rate. While non-linear rainfall early warning models based on the Back-Propagation Neural Network (BP-NN) algorithm consider the influences of various meteorological factors, the forecasts often exhibit a high false rate. To further improve the prediction of rainfall, a short-term rainfall early warning model based on the GNSS and BP-NN algorithms is proposed in this study. The method uses the traditional rainfall forecasting model and utilizes the BP-NN algorithm to combine various meteorological factors for rainfall early warning. The results of GNSS and BP-NN together improve the precision of rainfall early warning. Observation data from eight GNSS stations, the fifth-generation reanalysis of European Centre for Medium-Range Weather Forecast (ECMWF ERA5), and temperature, pressure, and rainfall data from corresponding meteorological stations in Ningbo, China were utilized to verify the rainfall early warning model proposed in this study. The results show that the proposed model can complement the advantages of the traditional linear and non-linear rainfall early warning methods. The model can maintain a high True Detected Rate (TDR) of rainfall early warning while simultaneously reducing the False Forecasted Rate (FFR). The average TDR of the eight GNSS stations is 100% and the FFR is 20.75%, which are both better than those of existing traditional linear and non-linear rainfall early warning models. [ABSTRACT FROM AUTHOR]

Summary: Obstacles to the efficient operation of rechargeable aluminum‐air batteries include slow oxygen reduction reaction (ORR), slow kinetics, and large overpotential of oxygen evolution reactions (OER). An effective solution is to develop a new bifunctional electrocatalyst that is effective for both the ORR/OER processes. In this study, we prepared the α‐MnO2/Co3O4 bifunctional composite catalyst by the in situ generation of Co3O4 nanoparticles on α‐MnO2 nanorods. ORR/OER catalytic activity and structures of the prepared catalysts have been investigated systematically. Compared with single‐component α‐MnO2 nanorods and Co3O4 particles catalyst, the α‐MnO2/Co3O4 composite catalyst possesses the smallest average pore diameter (11.84 nm), and the largest specific surface area (41.34 m2 g−1), which is due to the restriction of the growth of Co3O4 particles by α‐MnO2 nanorods. Besides, during the ORR process, the α‐MnO2/Co3O4 composite catalyst shows the most positive onset potential of 0.833 V, the most positive half‐wave potential of 0.760 V, and the biggest limiting current density of 3.881 mA cm−2. Meanwhile, during the OER process, the composite catalyst exhibits the lowest onset potential of 1.630 V, the lowest overpotential of 554 mV, and the biggest limiting current density of 24.590 mA cm−2. Furthermore, the α‐MnO2/Co3O4‐assembled aluminum‐air battery (AAB) delivers the best cycling performance. Our work provides an idea for optimizing the bifunctional catalyst with high ORR/OER activity and low cost used in secondary AAB. Highlights: A novel α‐MnO2/Co3O4 bifunctional composite catalyst was prepared successfully.The α‐MnO2/Co3O4 composite catalyst was applied in a rechargeable Al‐air battery.The α‐MnO2/Co3O4 exhibited better ORR/OER catalytic activity than α‐MnO2 and Co3O4.The Al‐air battery using α‐MnO2/Co3O4 catalyst showed excellent cycling performances. Novelty Statement: This is our original work. Neither the entire paper nor any part of its content has been published or has been accepted elsewhere. It is not being submitted to any other journal. [ABSTRACT FROM AUTHOR]

Background: Dilated cardiomyopathy (DCM) is one of the common causes of heart failure. Myocardial injury triggers an inflammatory response and recruits immune cells into the heart. High expression of Krüppel-like factor 2 (KLF2) in endothelial cells (ECs) potentially exerts an anti-inflammatory effect. However, the role of extracellular vesicles (EVs) from KLF2-overexpressing ECs (KLF2-EVs) in DCM remains unclear. Methods and results: EVs were separated from the supernatant of KLF2-overexpressing ECs by gradient centrifugation. Mice were repeatedly administered low-dose doxorubicin (DOX) and then received KLF2-EVs through an intravenous injection. Treatment with KLF2-EVs prevented doxorubicin-induced left ventricular dysfunction and reduced the recruitment of Ly6high Mo/Mø in the myocardium. We used flow cytometry to detect Ly6high monocytes in bone marrow and spleen tissues and to elucidate the mechanisms underlying this beneficial effect. KLF2-EVs increased the retention of Ly6Chigh monocytes in the bone marrow but not in the spleen tissue. KLF2-EVs also significantly downregulated C–C chemokine receptor 2 (CCR2) protein expression in cells from the bone marrow. Conclusions: EVs derived from KLF2-overexpressing ECs reduced cardiac inflammation and ameliorated left ventricular dysfunction in DCM mice by targeting the CCR2 protein to inhibit Ly6Chigh monocyte mobilization from the bone marrow. [ABSTRACT FROM AUTHOR]

[Display omitted] • δ13C, δ15N, and δ18O were analyzed to reveal carbon–nitrogen coupled absorption. • Stability regulation mechanism of karst reservoir was indicated by diel monitoring. • The stability promotes the biological carbon pump development of karst reservoir. • Biological carbon pump caused carbon burial in karst reservoir. While river damming has been extensively investigated, there remains unclear in the diel biogeochemical processes and carbon control mechanisms in karst reservoirs, under the influence of the biological carbon pump (BCP) effect. We investigated the diel variation of Hongjiadu (HJD) and Wujiangdu (WJD) reservoirs, which exhibit typical periodic thermal stratification, in the Wujiang River located in Southwest China. We found that diel variation of dissolved inorganic carbon (DIC) (HJD: 1668.6 ± 10.4 µmol/L; WJD: 1777.9 ± 31.5 µmol/L), δ13C DIC (HJD: −3.1 ± 0.1 ‰; WJD: −4.6 ± 0.4 ‰), and other parameters in the lentic zones were relatively stable. Moreover, the Revelle factor in the lentic zones (HJD: 44.3-49.0; WJD: 44.3-53.9) were substantially higher than those of the fluvial zones (HJD: 24.4-33.4; WJD: 14.2-35.1). The stable diel variations indicate that the HJD and WJD reservoirs may have distinct stability regulatory mechanisms. In the lentic zones, δ13C DIC , nitrogen–oxygen isotope (δ15N and δ18O), and the correlation of C-N indicated that the conversion of DIC and NO 3 – is primarily influenced by primary production, and there was coupled absorption of carbon and nitrogen nutrients during photosynthesis. Meanwhile, the C/N weight ratio (6.0-10.1) and the δ13C POC (−30.0 ‰ to −24.7 ‰) also revealed a gradual transition from soil organic matter (OM) in the fluvial zone to phytoplankton source in the intermediate-lentic zone. Thus, two reservoirs had a significant BCP effect and converted a significant amount of DIC to autochthonous organic carbon (AOC) burial in the lentic zones. The BCP effect in subtropical deep karst reservoirs buried lots of carbon, increased carbon sequestration and decreased CO 2 emissions in the lentic zone. Simultaneously, the stability of reservoirs promotes BCP effect and intensifies carbon sequestration, which is of great significance for the study of the global carbon sources-sinks pattern. [ABSTRACT FROM AUTHOR]

In this study, we developed a Cu 0.5 Fe 2.5 S 4 nanocatalyst through facile sulfidation of the Cu-MIL-88B(Fe) precursor to expedite surface Fe(III) reduction and enhance H 2 O 2 activation in the heterogeneous electro-Fenton (HEF). The as-prepared catalyst possesses relatively large specific surface area and uniformly dispersed metal active sites. The Cu 0.5 Fe 2.5 S 4 -catalyzed HEF system allowed complete removal of naproxen with minimal metal leaching, surpassing that of Cu-MIL-88B(Fe) or Fe 3 S 4. Quantitative XPS analysis, electrochemical characterization and density functional theory calculations reveal an electron donor-shuttle regime in which S2- and Cu species serve as the electron donor and shuttle, respectively. The Cu species significantly accelerate the internal electron transfer between S and Fe and mitigate the dissolution of the adjacent iron sites, securing the sustainable reducing capacity. Moreover, Cu 0.5 Fe 2.5 S 4 -based HEF exhibits great practicability for treatment of various organics in urban wastewater. This study opens new avenue for addressing the challenge of sluggish Fe(III)/Fe(II) cycling in HEF. [Display omitted] • Cu 0.5 Fe 2.5 S 4 designed from MOF sulfidation serves as novel HEF catalyst. • S2- provides many electrons to boost the Fe(III)/Fe(II) cycling in HEF. • Cu species acts as the electron shuttle to accelerate the internal electron transfer. • The Cu-doping stabilizes the adjacent iron sites and enhances the •OH production. • The high porosity and dispersibility of Cu 0.5 Fe 2.5 S 4 promote the mass transport in HEF. [ABSTRACT FROM AUTHOR]

The search for natural and efficacious antineoplastic drugs, with minimal toxicity and side effects, is an important part of antitumor drug research and development. Tanshinone IIA is the most evaluated lipophilic active component of Salvia miltiorrhiza. Tanshinone IIA is a path-breaking traditional drug applied in cardiovascular treatment. It has also been found that tanshinone IIA plays an important role in the digestive, respiratory and circulatory systems, as well as in other tumor diseases. Tanshinone IIA significantly inhibits the proliferation of several types of tumors, blocks the cell cycle, induces apoptosis and autophagic death, in addition to inhibiting cell migration and invasion. Among these, the regulation of tumor-cell apoptosis signaling pathways is the key breakthrough point in several modes of antitumor therapy. The PI3K/AKT/MTOR signaling pathway and the JNK pathway are the key pathways for tanshinone IIA to induce tumor cell apoptosis. In addition to glycolysis, reactive oxygen species and signal transduction all play an active role with the participation of tanshinone IIA. Endogenous apoptosis is considered the main mechanism of tumor apoptosis induced by tanshinone IIA. Multiple pathways and targets play a role in the process of endogenous apoptosis. Tanshinone IIA can protect chemotherapy drugs, which is mainly reflected in the protection of the side effects of chemotherapy drugs, such as neurotoxicity and inhibition of the hematopoietic system. Tanshinone IIA also has a certain regulatory effect on tumor angiogenesis, which is mainly manifested in the control of hypoxia. Our findings indicated that tanshinone IIA is an effective treatment agent in the cardiovascular field and plays a significant role in antitumor therapeutics. This paper reviews the pharmacological potential and inhibitory effect of tanshinone IIA on cancer. It is greatly anticipated that tanshinone IIA will be employed as an adjuvant in the treatment of various cancers. [ABSTRACT FROM AUTHOR]

Objective. To evaluate the effect of massive transfusion protocol on coagulation function in elderly patients with multiple injuries. Methods. In this retrospective cohort study, clinical data were collected from a total of 94 elderly patients with multiple injuries, including 44 cases who received routine transfusion protocol (control group) and 50 cases who concurrently received massive transfusion protocol in our hospital (research group). The changes in platelet parameters, coagulation function, and organ dysfunction scores at admission and 24 h after transfusion were compared between the two groups. The 24-hour plasma and red blood cell transfusion volume, length of stay, complications, and mortality of the two groups were analyzed statistically. Results. Twenty-four hours after blood transfusion, the hematocrit, platelets, and hemoglobin in the research group were higher than those in the control group, while the activated partial thromboplastin time, prothrombin time, thrombin time, fibrinogen, and scores of Marshall scoring system and Sequential Organ Failure Assessment were lower than those in the control group (P < 0.01). The 24-hour plasma transfusion volume was higher, and the length of intensive care unit (ICU) stay and total length of stay were lower in the research group compared with the control group (P < 0.01). No significant difference was found in the mortality rate between the research group and the control group (10.00% vs. 13.64%, P > 0.05). The incidence of complications in the research group was lower than that in the control group (12.00% vs. 31.82%, P < 0.05). Conclusion. Massive transfusion protocol for elderly patients with multiple injuries can improve their coagulation function and platelet parameters, alleviate organ dysfunction, shorten length of ICU stay, and decrease the incidence of complications, which is conducive to improving the prognosis of patients. [ABSTRACT FROM AUTHOR]

The liver is a crucial center in the regulation of energy homeostasis under starvation. Although downregulation of mammalian target of rapamycin complex 1 (mTORC1) has been reported to play pivotal roles in the starvation responses, the underpinning mechanisms in particular upstream factors that downregulate mTORC1 remain largely unknown. To identify genetic variants that cause liver energy disorders during starvation, we conduct a zebrafish forward genetic screen. We identify a liver hulk (lvh) mutant with normal liver under feeding, but exhibiting liver hypertrophy under fasting. The hepatomegaly in lvh is caused by enlarged hepatocyte size and leads to liver dysfunction as well as limited tolerance to starvation. Positional cloning reveals that lvh phenotypes are caused by mutation in the ftcd gene, which encodes the formimidoyltransferase cyclodeaminase (FTCD). Further studies show that in response to starvation, the phosphorylated ribosomal S6 protein (p-RS6), a downstream effector of mTORC1, becomes downregulated in the wild-type liver, but remains at high level in lvh. Inhibition of mTORC1 by rapamycin rescues the hepatomegaly and liver dysfunction of lvh. Thus, we characterize the roles of FTCD in starvation response, which acts as an important upstream factor to downregulate mTORC1, thus preventing liver hypertrophy and dysfunction. Author summary: Under starvation, the liver initiates a series of metabolic adaptations to maintain energy homeostasis that is critical for survival. During this process, mTORC1 pathway is downregulated to reduce anabolism and promote catabolism, ensuring adequate usage of limited resources. However, mechanisms underlying the downregulation of mTORC1 remain incompletely understood. In a zebrafish genetic screen aiming to characterize factors important for starvation response in the liver, we identify an ftcd mutation that causes liver hypertrophy and dysfunction under fasting. FTCD acts upstream to inactivate mTORC1 in response to starvation. Our work reveals previously unappreciated roles of FTCD in the responses to energy stress through modulating mTORC1 activities, moreover implicates a potential liver disorder risk of FTCD deficiency under the circumstances of starvation. [ABSTRACT FROM AUTHOR]

State-of-the-art Re-ID methods based on unsupervised domain adaption transferred the domain knowledge by pre-training model on labeled source domain and fine-tuned the pre-trained model with pseudo labels generated by clustering samples on unlabeled target domain. Unfortunately, compared with supervised Re-ID methods, the performance of exiting clustering-based UDA Re-ID methods dropped sharply, since these methods utilized a not good enough baseline and seldom handled the noisy pseudo labels generated by clustering algorithm. In this paper, we try to address the UDA problem by designing a Strong Clustering-based Unsupervised Re-ID (SCURID) baseline for further research at first. Then, we integrate the hard labels and soft multilabels to learn more discriminative features on a unified angular regularized metric space. Specifically, we design the angular margin losses consisting of Hard Angular Margin Identification (HAMI) loss and Soft Angular Margin Identification (SAMI) loss. The HAMI loss can learn generalizable and discriminative features through hard pseudo labels generated by clustering on unlabeled target domain. The SAMI loss is proposed to refine the hard noisy pseudo labels through the soft multilabels obtained from peer network. Benefited from SCURID baseline and two angular margin losses, it enables the clustering-based UDA Re-ID model to alleviate the negative effect of noisy labels and toward more discriminability. Comprehensive and extensive experiments on three public available Re-ID datasets, e.g., Matket-1501, DukeMTMC-reID and MSMT17, demonstrate that our proposed method can outperform the state-of-the-art results on UDA Re-ID task. [ABSTRACT FROM AUTHOR]

[Display omitted] • BPF promotes glycolysis and the secretion of pro-inflammatory cytokines in macrophages. • Enhanced glycolysis promotes the secretion of pro-inflammatory cytokines induced by BPF. • The PI3K-AKT pathway is involved in BPF induced glycolysis and the secretion of pro-inflammatory cytokines of macrophages. • Estrogen receptor (ER) mediates the activation of PI3K-AKT signaling pathway induced by BPF. Bisphenol F (BPF) is a member of endocrine disrupting chemicals (EDCs). As a substitute of bisphenol A (BPA), BPF is widely used in various consumer products, leading to an increased risk of people's exposure. However, there are few studies on the immunotoxicity and mechanism of BPF. This study aimed to investigate the effect of BPF on the secretion of pro-inflammatory cytokines by macrophages and explore its mechanism. In our study, RAW264.7 macrophages were treated with different concentrations of BPF (0, 5, 10 and 20 μM) for 24 h. The results showed that the secretion of pro-inflammatory cytokines (IL-6, TNF-α and IL-1β) and the production of lactate were increased in a dose-dependent manner. BPFalso led to the activation of the PI3K-AKT signaling pathway. After pretreatment with glycolysis inhibitor (2-DG) and exposure to BPF (20 μM), the secretion of pro-inflammatory cytokines induced by BPF was inhibited. PI3K inhibitor (LY294002) and estrogen receptor (ER) antagonist (ICI 182,780) could also inhibit the above effects induced by BPF (20 μM). In conclusion, our results suggested that BPF can enhance glycolysis through ER mediated PI3K-AKT signaling pathway, and the enhanced glycolysis further promoted the secretion of pro-inflammatory cytokines. Our research provides basic data for future studies on bisphenol exposure and immunotoxicity. [ABSTRACT FROM AUTHOR]

Hierarchical Fe-MFI were synthesized by post-treatment with TPAOH and applied as catalysts in liquid phase dehydration of 1-phenylethanol. The catalysts were characterized by XRD, TEM and N2 physisorption et al. After treatment, more ferric ions occupied zeolite framework sites, leading to increase in Brønsted acid sites content. Moreover, secondary pores with pore size range in 8–100 nm were introduced into inside zeolite. The secondary pores improved the accessibility of active centers and diffusion properties of reactants. The conversion of 1-phenylethanol reached 90% with 99% styrene selectivity in 1.5 h at 80 °C, while the reaction time of hierarchical Fe-MFI is only a half of microporous Fe-MFI zeolite. Moreover, the hierarchical Fe-MFI could be reused for at least five times. [ABSTRACT FROM AUTHOR]

After a major debt crisis occurs in a listed company, the stock prices of related enterprises may also fluctuate sharply, resulting in the spread of debt risk to more enterprises. Taking the stocks of listed companies as network nodes, we constructed a complex stock market network over three periods of time through the logarithmic return rate of stocks for the three periods of prophase, metaphase, and anaphase of the debt crisis. We studied the topological characteristics of the network and destructiveness over the three periods. Finally, the minimum spanning tree was used to construct a network and the community structure of the network. The empirical analysis took the debt crisis of the China Evergrande Company as an example to analyze the impact of its major debt crisis on the Chinese stock market. The research findings were as follows: First, the debt crisis increased the inter-industry connections within the network, that is, the correlations between enterprises in different industries was enhanced. Second, the closeness of the cross-industry connections increased the connectivity efficiency of the network, but compared with the other two periods, the debt crisis in the metaphase was less stable. Third, community research showed that in the metaphase of the debt crisis, the enterprises became the core nodes of the network. [ABSTRACT FROM AUTHOR]

Achieving the target of carbon neutrality has been an important approach for China to mitigate global climate change. Enterprises are major carbon emitters, and a well-designed early warning system is needed to ensure that their emissions align with carbon neutrality goals. Therefore, this study utilized electricity big data to construct an early warning model for enterprise carbon emissions based on carbon quota allocation. Taking key carbon-emitting enterprises in Guangxi as a case study, we aim to provide insights to support China's dual carbon goals. Firstly, we established the Carbon Quota Allocation System, enabling carbon quota allocation at the enterprise levels. Secondly, we developed the Enterprise Carbon Neutrality Index, facilitating dynamic warnings for carbon emissions among enterprises. The main conclusions are as follows: (1) In 2020, Guangdong received the highest carbon quota of 606 million tons, representing 5.72% of the national total, while Guangxi only received 2.63 billion tons. (2) Only 39.34% of enterprises in Guangxi are able to meet the carbon neutrality target, indicating significant emission reduction pressure faced by enterprises in the region. (3) Over 90% of enterprises in Guangxi receive Commendation and Encouragement warning levels, suggesting that enterprises in Guangxi are demonstrating a promising trend in emission reduction efforts. [ABSTRACT FROM AUTHOR]

In the traditional control scheme of a 12/8-pole bearingless switched reluctance motor (BSRM), radial force and torque are usually controlled as a compromise due to the conflict between their effective output areas. Additionally, each phase requires individual power circuits and is excited in turn to produce a continuous levitation force, resulting in high power device requirements and high controller costs. This paper discusses a 12/8-pole single-winding hybrid-rotor bearingless switched reluctance motor (HBSRM) with a hybrid rotor consisting of cylindrical and salient-pole lamination segments. The asymmetric rotor of the HBSRM slightly increases the complexity of its structure and magnetic circuit, but makes it possible to generate the desired radial force at any rotor angular position. A control scheme for the HBSRM is developed to utilize the independent excitation of the four windings in one phase to generate the desired levitation force at any rotor angular position, and it requires only half the number of power circuits used in the conventional control scheme of a 12/8-pole single-winding BSRM. Different from the average torque chosen to be controlled in traditional methods, this scheme directly regulates the instantaneous total torque produced by all excited phases together and presents a current algorithm to optimize the torque contribution of each phase so as to reduce torque pulsation, and the improved performance of this bearingless motor is finally validated by simulation analysis. [ABSTRACT FROM AUTHOR]

Lead iodide (PbI 2) as a defect passivation in perovskite thin films can reduce halide vacancies and improve the performance of perovskite solar cells. However, excess PbI 2 can hurt the device's performance. In the case of perovskite films prepared by two-step sequential deposition, excess PbI 2 is distributed on the surface of perovskite film. The photo-decomposition of PbI 2 and the formation of surface energy barriers can hinder charge transfer in the device, leading to reduced device performance and accelerated device degradation. Inspired by the use of surfactants to control the morphology of perovskite nanocrystals, a dual-functional surfactant (oleamide) was introduced to control the distribution of excess PbI 2 on perovskite films. By adding oleamide, the aggregation distribution of PbI 2 was successfully achieved at the perovskite grain boundaries (GBs), forming a Type-I band alignment and reducing the trap density, thereby prolonging the carrier lifetime. The results show that the power conversion efficiency (PCE) of the device increased from 21.23% to 23.12% after the introduction of oleamide. Compared with the control and oleamide-modified devices, the deep-level defects were reduced by about five orders of magnitude due to the Lewis-base nature of amide groups in oleamide. In addition, due to the aggregation distribution of excess PbI 2 at GBs and the hydrophobicity of oleamide, the modified device showed better stability, maintaining 83% of its initial performance after 1000 h in air. [ABSTRACT FROM AUTHOR]

A label-free sensing paradigm based on smart flared-nanokites is developed for multiplexed detection of virus DNA. A nanokite consists of silver nanoclusters beacons (Ag NCBs) immobilized on gold nanoparticle (Au NP) core. Ag NCB, possessing hairpin-shaped configuration, includes three functional domains: silver nanoclusters (Ag NCs) as the reporter, conjugated loop as recognizing element, and stem attached thiol. Via thiol-gold bond, Ag NCBs self-assemble on Au NP and form Ag NCBs/Au NP. In this conformation, close proximity of Ag NCs to Au NP leads to quenching fluorescence owing to energy transfer. However, upon recognizing loop binds to target, concomitant flying of Ag NCs from Au NP can be monitored as corresponding fluorescence enhancement, termed a flared-nanokite. Interestingly, ultra-high fluorescence recovery rate is calculated as 4379.2% (1300.4%) for G-/R-nanokite. Moreover, through by bicolor Ag NCBs simultaneously immobilize on Au NP, multicolor flared-nanokite for multichannel detecting DNAs has been successfully constructed based on multistimuli-responsive effect, demonstrating its promising application in accurate diagnosis and treatment. [Display omitted] • Activatable flared-nanokites are developed for multiplexed detection of virus genes. • Nanokite consists of silver nanoclusters beacons immobilized on gold nanoparticle. • Ultra-high fluorescence recovery rate 4379.2% and 1300.4% for G- and R-nanokites. • Constructing logic gates for detecting DNAs via smart multicolor flared-nanokites. [ABSTRACT FROM AUTHOR]

Polymer hydrogels are a promising electrolyte for flexible superconductors (FSCs) due to their excellent flexibility, ions transportations and interfacial compatibility. However, the large internal resistance will decrease the power density (PD) and energy density (ED) of FSCs. In this work, Ti 3 C 2 T x was introduced to polyacrylamide/calcium alginate (PC) hydrogel electrolyte to decrease the internal resistance (IR) and improve the interfacial adhesion. The polyacrylamide/calcium alginate@Ti 3 C 2 T x (PCT) composite hydrogels were successfully prepared by in-situ polymerization. Their mechanical property and adhesive property to various substrates were investigated, respectively, and a flexible supercapacitor was assembled with composite hydrogels as electrolyte and two self-made Ti 3 C 2 T x sheets as electrode. It was found composite hydrogels can adhere to various substrates, which make the voltage drop of FSCs from 163 mV to 78.9 mV. The FSCs show a good performance, whose specific capacitance is 1051.9 mF cm−2 with a current density of 1.07 mA cm−2, and the ED reaches 32.3 Wh kg−1 and the capacitance retention rate is as high as 96% at a high current density of 18.7 mA cm−2. Meanwhile, it can sensitively monitor human movements such as finger bending, frowning, swallowing, etc. This work is expected to be applied in the field of energy storage and sensing. [Display omitted] • Ti 3 C 2 T x was introduced to the PC hydrogel to decrease the internal resistance and improve the interfacial adhesion. • The FSC with PCT as electrolyte has high specific capacitance (1051.9 mF cm−2) and large energy density (32.3 Wh kg−1). • The PCT hydrogel shows a good performance in the field of sensing, it can sensitively monitor many human movements. [ABSTRACT FROM AUTHOR]

This study aims to reconstruct signals that are sparse with a tight frame from undersampled data by using the ℓ q -minimization method. This problem can be cast as a ℓ q -minimization problem with a tight frame subjected to an undersampled measurement with a known noise bound. We proved that if the measurement matrix satisfies the restricted isometry property with δ 2 s ≤ 1 / 2 , there exists a value q 0 such that for any q ∈ (0 , q 0 ] , any signal that is s-sparse with a tight frame can be robustly recovered to the true signal. We estimated q 0 as q 0 = 2 / 3 in the case of δ 2 s ≤ 1 / 2 and discussed that the value of q 0 can be much higher. We also showed that when δ 2 s ≤ 0.3317 , for any q ∈ (0 , 1 ] , robust recovery for signals via ℓ q -minimization holds, which is consistent with the case of ℓ q -minimization without a tight frame. [ABSTRACT FROM AUTHOR]

[Display omitted] • MIL-88B(Fe)/Fe 3 S 4 hybrids for effective water treatment by heterogeneous electro-Fenton. • Hybrid catalyst: highly uniform composition due to excellent distribution of small Fe 3 S 4. • Sulfidation allows breaking the activity-stability trade-off for high performance HEF. • Good recyclability of hybrids and fast trimethoprim removal even in urban wastewater. • Great catalytic activity and degradation mechanism confirmed by DFT calculations. Fe-based metal–organic frameworks are promising catalysts for water treatment, although their viability is hampered by the slow regeneration of active Fe(II) sites. A facile sulfidation strategy is proposed to boost the catalytic activity of MIL-88B(Fe) in heterogeneous electro-Fenton (HEF) treatment of organic micropollutants at mild pH. The synthesized MIL-88B(Fe)/Fe 3 S 4 hybrids possessed numerous and durable unsaturated iron sites, acting the S2− atoms as electron donors that enhanced the Fe(II) recycling. The sulfidated catalyst outperformed the MIL-88B(Fe), as evidenced by the 7-fold faster degradation of antibiotic trimethoprim by HEF and the fast destruction of micropollutants in urban wastewater. The hybrid catalyst was reused, obtaining >90% drug removal after four runs and, additionally, its inherent magnetism facilitated the post-treatment recovery. Electrochemical tests and DFT calculations provided mechanistic insights to explain the enhanced catalysis, suggesting that the accelerated Fe(III)/Fe(II) cycling and the enhanced mass transport and electron transfer accounted for the efficient trimethoprim degradation. [ABSTRACT FROM AUTHOR]

The concepts of S -convergence and liminf convergence are extended from dcpos to T 0 topological spaces. We introduce WC-spaces, a weakening of C-spaces, which were introduced as the generalization to T 0 spaces of continuous posets with their Scott topology. The main results are: (1) A T 0 space (X , τ) is a C-space iff the S -convergence coincides with convergence in the topology τ iff (X , τ) is a web space and the liminf convergence coincides with convergence in the supremum of τ and the lower topology; (2) A T 0 space is a WC-space iff the liminf convergence is topological for the liminf topology. [ABSTRACT FROM AUTHOR]

• Fe-based amorphous alloy was treated by the continuous rapid annealing. • B s and H c of the as-annealed alloy are 1.66 T and 7.6 A/m, respectively. • As-annealed ribbon can be bent 180° without breaking. • Precipitation of α-Fe with a size of 2–5 nm is responsible for the good properties. Fe-based amorphous alloys are promising soft magnetic materials for applications in power electronic devices. However, the practical use is inevitably limited by their brittleness that results from annealing. In this paper, an Fe 85 P 11 C 2 B 2 amorphous alloy was heat treated by using a self-designed continuous rapid annealing equipment. After rapidly annealing the amorphous precursors at 773 K for 0.3 s, the α-Fe phase with a size of 2 ∼ 5 nm precipitated, and the ribbon sample exhibits a high saturation magnetization (B s) of 1.66 T and low coercivity (H c) of 7.6 A/m in combination with good bending ductility. This work will provide a new heat treatment method for the soft-magnetic Fe-based amorphous alloy that can inhibit annealing-induced brittleness. [ABSTRACT FROM AUTHOR]

Solution-processed Cu-doped SnO 2 as an effective electron transporting layer for high-performance planar perovskite solar cells are systematically studied. The energy-level of SnO 2 electron transporting layer and the crystallization of CsFAMA films exhibit dramatically different evolution trends with respect to the addition of copper. The replacement of Sn ions by copper ions in the materials result in an improvement in conductivity of Cu-doped SnO 2 , further improve the current density of the corresponding devices. A little bit of p-type CuO does a lot for SnO 2 electron transport layer and their solar cells are firstly demonstrated. [Display omitted] • The Cu-doped SnO 2 has been successfully achieved, which results in the enhanced conductivity and improved energy band position for the Cu: SnO 2 electron transport layer. • A better quality of perovskite film with enhanced crystallinity and enlarged grain size was obtained. • The doping concentration of 5 mol% was desirable for the fabricated CsFAMA solar cells with a champion PCE of 21.35%. • The PSCs device based on Cu: SnO 2 ETL delivers excellent stability under continuous light or thermal conditions. A high-quality electron transport layer (ETL) is indispensable for effective and stable planar perovskite solar cells (PSCs). Tin oxide (SnO 2) is considered the most promising alternative to TiO 2 as ETL due to its excellent optical and electrical properties. However, some of improvements need to be carried out for intrinsic SnO 2 , such as conductivity, energy loss, and lattice mismatch in the SnO 2 /perovskite interface. Herein, the Cu-doped SnO 2 (Cu: SnO 2) as ETL has been made through mixing the copper salt precursor solution with SnO 2 colloidal solution in room-temperature solution-processed. The Cu incorporated into SnO 2 increases the conductivity of ETL and uplifts the conduction band to obtain a more suitable band alignment in SnO 2 /perovskite interface for relieving the energy barrier in the charge transporting. Moreover, it further improves the quality of perovskite films with the enhanced crystallinity, enlarged grain size, which have an impact on light absorption and reduction of defect states for the perovskite layer. The power conversion efficiency (PCE) of the prepared planar PSCs with Cu:SnO 2 ETL exceeds 21%, compared with the SnO 2 -based PSCs (19.63%), and the long-term stability was improved. [ABSTRACT FROM AUTHOR]

Graphene inducing graphitization of hard carbon can be realized via assemble of PF and GO with hydrogen bonding, and sequential inducing tendency during carbonization process. [Display omitted] • A hard carbon with less defects and lower specific surface area is synthesized. • The unique structure is realized via graphene induced graphitization of hard carbon. • The hard carbon exhibits ultrahigh initial coulombic efficiency (90.4%). • A Na-ion full cell with great stability and superior rate capability is demonstrated. Hard carbons exhibit great potential as anode materials for Sodium-ion batteries (SIBs). However, the large initial irreversible capacity is still a major obstacle in their practical application. It is widely known that lower surface area and fewer defects may increase the initial Coulombic efficiency (ICE) for carbon anode in SIBs. In this study, a graphene-induced graphitization strategy is proposed for synthesizing less defective hard carbon. This strategy is realized through the assembly of phenolic resin (PF) and graphene oxide (GO) taking advantage of their hydrogen bonding interaction. Thus, aromatic ring near graphene has a strong tendency to be arranged along the graphene layer during pyrolysis process, a significant transition from sp 3 to sp 2 hybridization carbon occurs, endowing hard carbon with fewer defects and lower surface area. The structural advantages of the hard carbon contribute to the superior ICE (90.4%), the highest ever reported, and excellent reversible specific capacity of 343 mA h g−1 at 30 mA g−1 even after 100 cycles. [ABSTRACT FROM AUTHOR]

With designing stator teeth by using grain oriented silicon sheets (GO) and other parts still with non-grain oriented silicon sheets (NGO), the electromagnetic performance of interior permanent magnet synchronous machine (GO-IPMSM) can be improved greatly, however its torque ripple will be increased as well. For reducing its torque ripple, optimizing its rotor barrier shape is an effective way. In this paper, the polynomial method is proposed to establish the rotor barrier shape, and the genetic algorithm (GA) method is employed for the optimization process. In case the optimized GO-IPMSM can work normally, its anti irreversible demagnetization ability is analyzed as well. As shown, with the GO is adopted for designing the stator teeth and its rotor barrier shape is optimized, though its torque ability and efficiency have been increased, its anti irreversible demagnetization risk ability is reduced, however the proposed machine can still operate safely. [ABSTRACT FROM AUTHOR]

This study aims at the problem of reconstruction the unknown links in debt networks among enterprises. We use the topological matrix of the enterprise debt network as the object of reconstruction and use the time series data of accounts receivable and payable as input and output information in the debt network to establish an underdetermined linear system about the topological matrix of the debt network. We establish an iteratively reweighted least-squares algorithm, which is an algorithm in compressed sensing. This algorithm uses reweighted ℓ 2 -minimization to approximate ℓ 1 -norm of the target vectors. We solve the ℓ 1 -minimization problem of the underdetermined linear system using the iteratively reweighted least-squares algorithm and obtain the reconstructed topological matrix of the debt network. Simulation experiments show that the topology matrix reconstruction method of enterprise debt networks based on compressed sensing can reconstruct over 70% of the unknown network links, and the error is controlled within 2%. [ABSTRACT FROM AUTHOR]

• A simple solvent engineering strategy was employed to control morphology of PbI 2 films effectively by water processing. • Platelet-like PbI 2 films can successfully control the residual amount of PbI 2 in perovskite film. • Platelet-like PbI 2 films can control the morphology of the perovskite film and improve the device efficiency [Display omitted] The performance of organic-inorganic perovskite solar cells depends largely on the quality of perovskite film. Currently, various methods are applied to prepare the perovskite film. Among them, the two-step method is counted as a promising candidate to obtain high-quality perovskite film. In this study, we attain a special platelet-like PbI 2 films by applying pure water to cover wet PbI 2 film and standing for a period of time. The unique morphology contributes to the entry of organic cations solution into the PbI 2 and promoting its reaction with PbI 2 , which reducing the residual amount of PbI 2 in the perovskite film. Compared to the traditional two-step method, water processing method can obtain a high-quality perovskite film with enlarged grain size, improved crystallization, and prolonged carrier lifetime. As a result, the efficiency of the prepared device based on the film has increased from 17.90% without water processing to 20.14% of water processing. Which demonstrates that this solvent engineering for PbI 2 film opens up a possibility to prepare high-quality perovskite in a two-step method and obtain highly efficient perovskite solar cells. [ABSTRACT FROM AUTHOR]

In this paper, the concepts of g s 2 -convergence and quasi-liminf convergence of filters in posets are introduced. The main results are: (1) For an order consistent topology τ on a poset P , P is τ -quasicontinuous iff the g s 2 -convergence coincides with τ -convergence; (2) For an order consistent topology τ on a poset P , the quasi-liminf convergence coincides with τ ∨ ω (P) -convergence if P is τ -quasicontinuous; (3) For an order consistent topology τ on a poset P , P is τ -continuous iff the s 2 -convergence coincides with τ -convergence iff it is meet τ -continuous and the quasi-liminf convergence coincides with τ ∨ ω (P) -convergence. [ABSTRACT FROM AUTHOR]

Recently, spinel high-entropy oxide (HEO) anode materials have garnered extensive attention for high-energy lithium-ion batteries due to their high specific capacity. Many studies have explored its energy storage mechanism, but few have paid attention to its characteristics in long cycle life. In this work, the whole life cycling performance of (FeCoNiCrMn)-HEO is presented and investigated for the first time. Distinct capacity trends are studied to divide the cycling life into three stages: activation, upgradation, and degradation. Ex situ morphological characterizations are conducted to reveal that the driving force of stage change is continuous particle fragmentation. As a result, refined particles promote conversion reaction reversibility and induce extra interfacial capacity, achieving 2831 mAh g−1 at 825 cycles. Density functional theory (DFT) calculations provide a deeper insight into the high entropy effect on the ultra-high extra interfacial capacity. However, continuous refinement brings about huge electrolyte interface-derived layers, which are also responsible for pre-decay and post-collapse. The view of the evolution of the lithium storage mechanism is explicitly presented and experimentally verified by high-energy ball milling and fluorinated vinyl carbonate (FEC). These above results can give practical solutions to design high specific capacity and long-life cycle stability HEO anode in the future. [Display omitted] • The whole life performance of (FeCoNiCrMn)-HEO was studied for the first time. • The driving force of capacity change is continuous particle fragmentation. • Particle refinement enhances reaction reversibility and interfacial capacity. • The high entropy effect led to the ultra-high extra capacity. [ABSTRACT FROM AUTHOR]

In recent years, with the rapid development of information technology, the volume of image data has grown exponentially. However, these datasets typically contain a large amount of redundant information. To extract effective features and reduce redundancy from images, a representation learning method based on the Vision Transformer (ViT) has been proposed, and to our best knowledge, Transformer was first applied to zero-shot learning (ZSL). The method adopts a symmetric encoder–decoder structure, where the encoder incorporates Multi-Head Self-Attention (MSA) mechanism of ViT to reduce the dimensionality of image features, eliminate redundant information, and decrease computational burden. Consequently, it effectively extracts features, and the decoder is utilized for reconstructing image data. We evaluated the representation learning capability of the proposed method in various tasks, including data visualization, image reconstruction, face recognition, and ZSL. By comparing with state-of-the-art representation learning methods, the outstanding results obtained validate the effectiveness of this method in the field of representation learning. [ABSTRACT FROM AUTHOR]

Graphene, the first isolated two-dimensional atomic crystal, is about to pass its 20th year. The last decade has been a critical period for graphene to gradually move from the laboratory to practical applications, and the research on the spin-related physical properties and various spintronic applications of graphene is still enduring. In this review, we systematically retrospect the important and state-of-art progresses about graphene-based spintronics. First, spin–orbit coupling and various tuning means in graphene have been introduced, such as adatoms, electrical control, and the proximity effect. Second, several methods for inducing magnetism in graphene are summarized, including defect, atom doping, proximity effect, and the recently attractive twisted magic-angle. Third, graphene-based lateral and vertical spin valves are discussed, along with some emergent spin transport properties, including spin injection, scattering, and relaxation. Fourth, graphene-based spin logic circuits for spin communications and multifunctional spin logic devices are exhibited. Finally, some significant opportunities and challenges of graphene-based spintronics for the fundamental physics and practical applications in the future are briefly discussed. [ABSTRACT FROM AUTHOR]

Cement is a widely used construction material globally. Its manufacturing contributes to anthropogenic CO2 emissions significantly. However, its alkaline compounds can absorb CO2 from the surrounding environment and engage in a carbonation reaction, thereby functioning as a carbon sink. As a major cement producer and consumer, China has an important responsibility to rigorously investigate and accurately account for cement carbon uptake. This study presents a comprehensive analytical model of cement carbon uptake from China, revealing a substantial increase in carbon uptake from 1930 to 2021, peaking at 426.77 MtCO2 (95% Confidence Interval: 317.67–874.33 Mt CO2) in 2021. The uptake accounts for 8.10% to 45.40% of China's annual land sink and 2.51% to 4.54% of the global land sink. The cumulative carbon uptake by cement is approximately 7.06 Gt CO2 (95% CI: 5.22–9.44 Gt CO2) during this period, offsetting 50.7% of the total emissions (13.91 Gt CO2, 95% CI: 12.44–17.00 Gt CO2) from the cement industry. Notably, cement mortar contributed to most absorption (65.64%). From a life cycle perspective, the service stage of cement materials is the period where the largest CO2 sink is formed, accounting for 90.03% of the total. Therefore, the potential for carbon sequestration in cement materials and their waste is enormous. Additionally, the model improves the accuracy of cement carbon accounting, supporting both China and global carbon neutrality assessments. Thus, it is crucial for China to achieve its carbon neutrality goals sooner by prioritizing the environmental benefits of cement materials and wastes, and accelerating the development and commercialization of CO2 sequestration technologies for cement and its by-products. [ABSTRACT FROM AUTHOR]

Magnetic tunnel junctions (MTJs) are widely applied in spintronic devices for efficient spin detection through the imbalance of spin polarization at the Fermi level. The van der Waals (vdW) property of 2D magnets with atomically flat surfaces and negligible surface roughness greatly facilitates the development of MTJs, primarily in ferromagnets. Here, A‐type antiferromagnetism in 2D vdW single‐crystal (Fe0.8Co0.2)3GaTe2 is reported with TN ≈ 203 K in bulk and ≈ 185 K in 9‐nm nanosheets. The metallic nature and out‐of‐plane magnetic anisotropy make it a suitable candidate for MTJ electrodes. By constructing heterostructures based on (Fe0.8Co0.2)3GaTe2/WSe2/Fe3GaTe2, a large tunneling magnetoresistance (TMR) ratio of 180% at low temperature is obtained, with the TMR signal persisting at near‐room temperature 280 K. Furthermore, the TMR is tunable by the electric field, and the MTJ device operates stably with a low applied bias down to 1 mV (≈0.6 nA), highlighting its potential for energy‐efficient spintronic devices. This work opens up new opportunities for 2D antiferromagnetic spintronics and quantum devices. [ABSTRACT FROM AUTHOR]

Person re-identification, getting impressive performance under the single-domain setting, often suffers huge performance drop when deploying to the unseen target domain owing to domain gap. Current research mainly focuses on unsupervised domain adaptation to alleviate the domain gap, and the methods by clustering the target-domain samples have achieved significant results. However, some inaccurate pseudo-labels, i.e., noisy pseudo-labels, may be generated on clustering, which will seriously affect the performance of the model. In order to solve the above problem, we propose a novel unsupervised domain adaptive person re-identification method by exploiting reliable pseudo-labels (RPL) from two aspects, i.e., adaptive dynamic clustering (ADC) and cross-camera similarity evaluation (CCSE). Specifically, firstly, for the methods based on the density-based clustering algorithm, we propose the adaptive dynamic clustering which calculates the clustering radius adaptively and dynamically to obtain more reasonable clustering results in the iterative optimization of the model. Next, for noisy pseudo-labels caused by small inter-class variations under the same camera, we propose the cross-camera similarity evaluation to filter out these noises to further improve the discrimination of the model. Extensive experiments on three publicly available large-scale datasets show that the proposed method can achieve state-of-the-art performance on unsupervised domain adaptation person re-identification. [ABSTRACT FROM AUTHOR]

Surface acoustic wave (SAW) is a powerful technique for investigating quantum phases appearing in two-dimensional electron systems. The electrons respond to the piezoelectric field of SAW through screening, attenuating its amplitude, and shifting its velocity, which is described by the relaxation model. In this work, we systematically study this interaction using orders of magnitude lower SAW amplitude than those in previous studies. At high magnetic fields, when electrons form highly correlated states such as the quantum Hall effect, we observe an anomalously large attenuation of SAW, while the acoustic speed remains considerably high, inconsistent with the conventional relaxation model. This anomaly exists only when the SAW power is sufficiently low. [ABSTRACT FROM AUTHOR]

We demonstrated that ternary HfAlO2 amorphous film prepared with common co-sputtering technology can be a suitable gate dielectric for bilayer MoTe2 transistors. The film quality can be improved by optimizing the sputtering process and post-annealing treatment, which is superior to its binary Al2O3 and HfO2 components and satisfies gate dielectric criteria. The bilayer MoTe2 transistors with ∼29-nm-thick HfAlO2 gate dielectric exhibit an Ion/Ioff ratio of over 108 by a low operating voltage, together with a small subthreshold swing ≈ 71.22 mV/dec. These promising characteristics favor the development of high-performance and low-power ultrathin MoTe2-based beyond-silicon electronics. [ABSTRACT FROM AUTHOR]

Leaf morphology is a crucial aspect of plant architecture, yet the molecular mechanisms underlying leaf development remain incompletely understood. In this study, a narrow leaf mutant, m625, was identified in rice (Oryza sativa L.), exhibiting pleiotropic developmental defects. Pigment measurement revealed reduced levels of photochromic pigments in m625. Cytological analysis demonstrated that the m625 gene affected vascular patterns and cell division. Specifically, the narrowing of the leaf was attributed to a decrease in small vein number, shorter vein spacing, and an abnormal V-shaped arrangement of bulliform cells, while the thickening was caused by longer leaf veins, thicker mesophyll cells, and an increased number of parenchyma cell layers. The dwarf stature and thickened internode were primarily due to shortened internodes and an increase in cell layers, respectively. Positional cloning and complementation assays indicated that the m625 gene is a novel allele of NAL1. In the m625 mutant, a nucleotide deletion at position 1103 in the coding sequence of NAL1 led to premature termination of protein translation. Further RNA-Seq and qRT-PCR analyses revealed that the m625 gene significantly impacted regulatory pathways related to IAA and ABA signal transduction, photosynthesis, and lignin biosynthesis. Moreover, the m625 mutant displayed thinner sclerenchyma and cell walls in both the leaf and stem, particularly showing reduced lignified cell walls in the midrib of the leaf. In conclusion, our study suggests that NAL1, in addition to its known roles in IAA transport and leaf photosynthesis, may also participate in ABA signal transduction, as well as regulate secondary cell wall formation and sclerenchyma thickness through lignification. [ABSTRACT FROM AUTHOR]

Developing novel high‐temperature van der Waals ferromagnetic semiconductor materials and investigating their interface coupling effects with 2D topological semimetals are pivotal for advancing next‐generation spintronic and quantum devices. However, most van der Waals ferromagnetic semiconductors exhibit ferromagnetism only at low temperatures, limiting the proximity research on their interfaces with topological semimetals. Here, an intrinsic, van der Waals layered room‐temperature ferromagnetic semiconductor crystal, FeCr0.5Ga1.5Se4 (FCGS), is reported with a Curie temperature (TC) as high as 370 K, setting a new record for van der Waals ferromagnetic semiconductors. The saturation magnetization at low temperature (2 K) and room temperature (300 K) reaches 8.2 and 2.7 emu g−1, respectively. Furthermore, FCGS possesses a bandgap of ≈1.2 eV, which is comparable to the widely used commercial silicon. The FCGS/graphene 2D heterostructure exhibits an impeccably smooth and gapless interface, thereby inducing a robust van der Waals magnetic proximity coupling effect between FCGS and graphene. After the proximity coupling, graphene undergoes a charge carrier transition from electrons to holes, accompanied by a transition from non‐magnetic to ferromagnetic transport behavior with robust anomalous Hall effect (AHE). Notably, the van der Waals magnetic proximity‐induced AHE remains robust even up to 400 K. [ABSTRACT FROM AUTHOR]

Open in new tab Download slide OBJECTIVES This study aimed to analyse and determine the role of aortic length and curvature in the pathogenesis of acute type A aortic dissection (ATAAD) with ascending aortic diameters (AADs) <5 cm. METHODS We reviewed the clinical and imaging data of patients with ATAAD (n  = 201) and ascending aortic dilation (n  = 83). Thoracic aortic bending index (TABI) was used to quantify aortic curvature and analyse its role in ATAAD below the diameter risk threshold. RESULTS The AAD was <5.0 and <4.0 cm in 78% and 37% of patients with ATAAD, respectively. The median ascending aortic length (AAL) was 104.6 mm (Q1–Q3, 96.5–113.6 mm), and in 62.7% of patients, it was <11 cm. The median TABI was 14.99 mm/cm (Q1–Q3, 14.18–15.86 mm/cm). Patients with ATAAD and those with aortic dilation were matched for AAD, age, sex, height and other clinical factors. After matched, the dissection group had higher AALs (median, 102.9 mm; Q1–Q3, 96.0–112.5 mm vs median, 88.2 mm; Q1–Q3, 83.7–95.9 mm; P  < 0.001) and TABI (median, 14.84 mm/cm; Q1–Q3, 14.06–15.83 mm/cm vs median, 13.55 mm/cm; Q1–Q3, 13.03–14.28 mm/cm; P  < 0.001). According to the regression analysis, the area under the curve required to distinguish patients with ATAAD from those with aortic dilation was 0.831 in AAL, 0.837 in TABI and 0.907 when AAL was combined with TABI. CONCLUSIONS The patients with ATAAD had higher AAL and TABI than those with aortic dilation. The combination of TABI and AAL might be a potential morphological marker for determining ATAAD risk below the current aortic diameter risk threshold. [ABSTRACT FROM AUTHOR]

Organic semiconductors with noncovalently conformational locks (OSNCs) are promising building blocks for hole‐transporting materials (HTMs). However, lack of satisfied neighboring building blocks negatively impacts the optoelectronic properties of OSNCs‐based HTMs and imperils the stability of perovskite solar cells (PSCs). To address this limitation, we introduce the benzothieno[3,2‐b]thiophene (BTT) to construct a new OSNC, and the resulting HTM ZS13 shows improved intermolecular charge extraction/transport properties, proper energy level, efficient surface passivation effect. Consequently, the champion devices based on doped ZS13 yield an efficiency of 24.39 % and 20.95 % for aperture areas of 0.1 and 1.01 cm2, respectively. Furthermore, ZS13 shows good thermal stability and the capability of inhibiting I− ion migration, thus, leading to enhanced device stability. The success in neighboring‐group engineering can triggered a strong interest in developing thienoacene‐based OSNCs toward efficient and stable PSCs. [ABSTRACT FROM AUTHOR]