Search

Bibliometric analysis of highly cited papers facilitates researchers in formulating strategic research possibilities and addressing gaps in specific domains. In this context, a bibliometric analysis was conducted to identify published papers on "oral mucosal lesions in COVID-19" within medical literature. A comprehensive search was performed in the Scopus database in July 2023. Relevant articles were retrieved, reviewed, and data for the bibliometric analysis was recorded. Network visualization of authors, countries, and keywords was generated using VOSviewer software. The analyzed articles were published over the last three years, from 2020 to 2023, with the highest output observed in 2021. The citation count for individual papers ranged from 1 to 340, with a mean of 22.325 ± 58.93 citations. A total of 37 journals were involved in publishing papers on this topic, and five authors each contributed three papers. Notably, Brazil made the highest number of contributions with eight papers. Among the 40 papers, 19 were review papers and 16 were articles discussing various aspects of oral mucosal lesions in COVID-19 patients. Additionally, six papers were identified as systematic reviews, designated with a high level of evidence. This study presents a comprehensive bibliometric analysis of papers published on "oral mucosal lesions in COVID-19." The findings will assist researchers in identifying impactful papers, understanding the prevailing research trends, and guiding future research directions in this domain. The insights gained from this analysis can contribute significantly to advancing knowledge and improving patient care in this critical area of study. • First comprehensive bibliometric analysis on "oral mucosal lesions in COVID-19" in medical literature. • Offers valuable insights to researchers for strategic planning and further exploration in this domain. • Thoroughly examined articles from 2020 to 2023, with a peak in output observed in 2021. • Six systematic reviews among 40 papers, indicating high-quality evidence-based studies. • Brazil emerged as the top contributor with eight papers on the subject. [ABSTRACT FROM AUTHOR]

With prolonged pandemic conditions, and emerging evidence but persisting low awareness of the importance of nutritional derangements, ESPEN has promoted in close collaboration with World Health Organization-Europe a call for papers on all aspects relating COVID-19 and nutrition as well as nutritional care, in the Society Journals Clinical Nutrition and Clinical Nutrition ESPEN. Although more COVID-related papers are being submitted and continue to be evaluated, ESPEN and WHO present the current editorial to summarize the many published findings supporting major interactions between nutritional status and COVID-19. These include 1) high risk of developing the disease and high risk of severe disease in the presence of pre-existing undernutrition (malnutrition) including micronutrient deficiencies; 2) high risk of developing malnutrition during the course of COVID-19, with substantial impact on long-term sequelae and risk of long COVID; 3) persons with obesity are also prone to develop or worsen malnutrition and its negative consequences during the course of COVID-19; 4) malnutrition screening and implementation of nutritional care may improve disease outcomes; 5) social and public health determinants contribute to the interaction between nutritional status and COVID-19, including negative impact of lockdown and social limitations on nutrition quality and nutritional status. We believe the evidence supports the need to consider COVID-19 as (also) a case of malnutrition-enhanced disease and disease-related malnutrition, with added risk for persons both with and without obesity. Similarities with many other disease conditions further support recommendations to implement standard nutritional screening and care in COVID-19 patients, and they underscore the relevance of appropriate nutritional and lifestyle prevention policies to limit infection risk and mitigate the negative health impact of acute pandemic bouts. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Taibah University Medical Sciences is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The use of online learning and subsequent online testing has expanded rapidly in pharmacy programs across the United States. Numerous published studies have compared online learning with traditional methods in pharmacy. However, no such studies have been published in pharmacy. This study's objective is to compare first-professional year student preferences for computer-based vs. traditional paper-and-pencil testing for a required social and administrative pharmacy class. All students enrolled in the class were invited to complete one brief survey at the end of the semester to determine their testing preference. Of the 138 first-professional year students completing the survey, 79% (109 of 138) preferred computer-based testing, 9% had no preference, 6% (8 of 138) preferred paper-and-pencil testing, and the remainder (8 of 138) stated it depended on what was being tested. Ninety-one percent of students did not perceive the testing method to impact their grades. Students preferred computer-based testing over traditional paper-and-pencil as a convenient testing method (mean 4.73 vs. 3.4, P <.001), providing immediate feedback (mean 4.87 vs. 1.91, P <.001), and as a more effective testing method (mean 4.57 vs. 3.96, P <.001). First-professional year students preferred computer-based over traditional paper-and-pencil testing for a social and administrative science class, with the method of testing not perceived to impact grade. This finding is timely, given the recent required transitioning of all pharmacy classes and subsequent testing to an online format due to the coronavirus disease of 2019 pandemic. [ABSTRACT FROM AUTHOR]

We report the development and initial validation of a paper-based nucleic acid testing platform that integrates Loop-mediated isothermal amplification (LAMP) with clustered regularly interspaced short palindromic repeats (CRISPR) technology, referred to as PLACID (Paper-based LAMP-CRISPR Integrated Diagnostics). LAMP eliminates the need for thermal cycling, resulting in simplified instrumentation, and the CRISPR-associated protein (Cas 12a) system eliminates false positive signals from LAMP products, resulting in highly selective and sensitive assays. We optimized the assay to perform both amplification and detection entirely on paper, eliminating the need for complex fluid handling steps and lateral flow assay transfers. Additionally, we engineered a smartphone-operated system that includes a low-powered, non-contact IR heating chamber to actuate paper-based LAMP and CRISPR reactions and enable the detection of fluorescent signals from the paper. The platform demonstrates high specificity and sensitivity in detecting nucleic acid targets with a limit of detection of 50 copies/μL. We integrate an equipment-free sample preparation separation technology designed to streamline the preparation of crude samples prior to nucleic acid testing. The practical utility of our platform is demonstrated by the successful detection of spiked SARS-CoV-2 RNA fragments in saliva, E. Coli in soil, and pathogenic E. Coli in clinically fecal samples of infected patients. Furthermore, we demonstrate that the paper-based LAMP CRISPR chips employed in our assays possess a shelf life of several weeks, establishing them as viable candidates for on-site diagnostics. [ABSTRACT FROM AUTHOR]

• Global & national AMR actions focus on infection prevention in healthcare settings. • Home & everyday life settings contribute to acquiring & spreading AMR pathogens. • Targeted hygiene protects against infections, reducing antibiotic prescribing. • Targeted hygiene helps to minimize selection pressure for AMR development globally. • Reducing AMR requires greater focus on targeted hygiene in the home & community. Antimicrobial resistance (AMR) continues to threaten global health. Although global and national AMR action plans are in place, infection prevention and control is primarily discussed in the context of health care facilities with home and everyday life settings barely addressed. As seen with the recent global SARS-CoV-2 pandemic, everyday hygiene measures can play an important role in containing the threat from infectious microorganisms. This position paper has been developed following a meeting of global experts in London, 2019. It presents evidence that home and community settings are important for infection transmission and also the acquisition and spread of AMR. It also demonstrates that the targeted hygiene approach offers a framework for maximizing protection against colonization and infections, thereby reducing antibiotic prescribing and minimizing selection pressure for the development of antibiotic resistance. If combined with the provision of clean water and sanitation, targeted hygiene can reduce the circulation of resistant bacteria in homes and communities, regardless of a country's Human Development Index (overall social and economic development). Achieving a reduction of AMR strains in health care settings requires a mirrored reduction in the community. The authors call upon national and international policy makers, health agencies, and health care professionals to further recognize the importance of targeted hygiene in the home and everyday life settings for preventing and controlling infection, in a unified quest to tackle AMR. [ABSTRACT FROM AUTHOR]

COVID-19 is one of the most important topics these days, specifically on search engines and news. While fake news is easily shared, scientific papers are reliable sources where information can be extracted. With about 24,000 scientific publications on COVID-19 and related research on PubMed, automatic computer-assisted analysis is required. In this paper, we develop two methodologies to get insights on specific sub-topics of interest and latest research sub-topics. These rely on natural language processing and graph-based visualizations. We run these methodologies on two cases: the virus origin and the uses of existing drugs. [ABSTRACT FROM AUTHOR]

• Telemedicine improves access to care in underserved or remote areas. • The COVID pandemic induced a widespread shift to remote rheumatology care methods. • Telemedicine is an unparalleled change to traditional rheumatology health care. • Telerheumatology has been found to have value in many aspects of clinical care including patients' triage, e-PROs, training. • Telerheumatology is not intended to replace but to complement the care provided by in-person visits. In this article, we review published literature on "telerheumatology", a term describing the use of telemedicine in rheumatology. This field has received considerable recent attention through the development of efficient digital technologies, resulting in a good level of satisfaction among patients and health care professionals. In 2020, the social distancing constraints during the COVID-19 pandemic accelerated more widespread adoption worldwide. Telerheumatology is particularly suited for patients with rheumatoid arthritis who have achieved a sustained therapeutic target of remission or low disease activity. To facilitate remote consultations and meet expectations of rheumatologists and patients, international and national guidelines have recently been proposed and existing tools, such as Patient-Reported Outcomes questionnaires, have had to be digitally adapted. In addition, telerheumatology toolkits are proposed by the Arab League of Associations for Rheumatology (ArLAR), the Association of American Medical College (AAMC), and the American College of Rheumatology (ACR) for all learners, from medical students to practicing clinicians, encouraging the acquisition of telehealth skills and facilitating their integration into their routine clinical practice. The main benefits reported for this mode of health care are greater access to specialty care, flexibility, reduced rates of missed appointments, as well as improved patient engagement and autonomy. Limitations include the absence of physical examination. However, to implement telerheumatology effectively and widely in daily clinical practice, some barriers still need to be addressed. These include training of health care professionals, technological restrictions and reimbursement mechanisms. Despite the advantages of telerheumatology, it is not intended to replace face-to-face visits, but rather as a way to enhance access to care, service delivery and health care support for patients. [ABSTRACT FROM AUTHOR]

This study aimed to assess the current status of India's COVID-19 research from the top 100 most cited papers, using bibliometrics methods and indicators and suggest strengths and weaknesses. Publications on COVID-19 research from India between December 2019 and 22 August 2023 were retrieved from the Scopus database. From 37101 studies retrieved, the first top 100 Highly Cited Papers (HCPs) having received 270 to 2931 citations, were identified. The top 100 most cited Indian papers were published from 2020 to 2023, with the majority (75) in the year 2021, followed by 24 in 2022. They were cited a total of 56661 times (average - 566.61 times). The 242 authors of these HCPs were from 159 Indian organizations, and the articles were published in 60 journals. 29 % and 59 % of these HCPs received external funding support and were involved in international collaborations, respectively. There was poor collaboration among Indian research institutions and a dearth of funding from India. None of the Indian HCPs figured in the global 100 HCPs. Although citations of research papers published from India increased during COVID-19, limited collaboration, inadequate funding, and subpar publications hindered Indian scientists. To enhance India's research landscape, we propose dismantling barriers, nurturing collaboration, and encouraging knowledge exchange among domestic institutions. • A profile of the top 100 highly cited papers from Indian authors of COVID-19 research is presented. • There is limited global visibility and poor collaboration in Indian research. • Indian research and funding organizations need to increase funding and collaborations. [ABSTRACT FROM AUTHOR]

Coronavirus Disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2, spreading in Italy during the first months of 2020, abruptly changed the way of practicing medicine in this country. As a consequence of the lockdown, the diagnostic and therapeutic management of paediatric chronic conditions, such as inflammatory bowel disease (IBD) has been affected. During the peak of COVID-19 pandemic, elective visits, endoscopies and infusions have been postponed, with potential clinical and psychological impact on disease course and a high likelihood of increasing waiting lists. While slowly moving back towards normality, clinicians need to recognize the best ways to care for patients with IBD, carefully avoiding risk factors for new potential epidemic outbreaks. In this uncertain scenario until the development and spread of COVID-19 vaccine, it is necessary to continue to operate with caution. Hereby we provide useful indications for a safer and gradual restarting of routine clinical activities after COVID-19 peak in Italy. [ABSTRACT FROM AUTHOR]

On the 2nd of March 2020, Kingdom of Saudi Arabia confirmed its first case of the coronavirus's newly emerging strain, causing coronavirus disease 2019 (COVID-19). Soon after, the number of confirmed cases started to increase nationally. In light of the emerging outbreak, all healthcare professionals, including pharmacists, began to function with maximum capacity and efforts. The Saudi Society of Clinical Pharmacy (SSCP) acknowledges the substantial impact pharmacists can play during outbreaks. Based on the existing scientific knowledge during this outbreak, the SSCP established an expert writing task force to conceptualize and draft the proposed recommendations that highlights the roles and responsibilities of pharmacists during epidemics and pandemics. The SSCP writing task force issued 28 recommendations. In addition to the national and institutional guidelines, these recommendations could serve as guidance for the impacted entities. [ABSTRACT FROM AUTHOR]

[Display omitted] • M-GQDs exhibit excellent performance in distinguishing and detecting antibiotics. • Special phenomena are presented when various kinds of antibiotics are added with different mechanisms. • The probe shows low LOD for DOX, PEF and LEV of 39.3 nM, 48.6 nM and 35.1 nM. • A 3D μPAD-based platform is proposed for real-time monitoring antibiotics. For antibiotics misuse since the global outbreak of COVID 19, a novel strategy for discriminating and detecting antibiotics is proposed based on the graphene quantum dots with multi-doped heteroatoms including F, N and P (M-GQDs), which exhibit blue emission (419.0 nm) under the excitation of 336.0 nm. Specifically, the fluorescence of M-GQDs is quenched by tetracyclines (TCs) owing to inner filter effect (IFE) and enhanced by alkane-modified fluoroquinolones (AFQs), which is attributed to restricted conformational rotation based on π-π stacking, hydrogen-bonding and electrostatic interactions. Meanwhile, the electron-accepting property of oxazine ring in oxazine-modified fluoroquinolones (OFQs) increases emission peak at 498.0 nm and decreases emission peak at 419.0 nm as the color changes from blue to cyan. Moreover, a cascade system integrated with 3D microfluidic paper‐based analytical device (3D-μPAD) is applied successfully for visually distinguishing three antibiotics, which shows great potential and versatility of M-GQDs for food safety monitoring. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has presented a serious challenge to the hepatology community, particularly healthcare professionals and patients. While the rapid development of safe and effective vaccines and treatments has improved the clinical landscape, the emergence of the omicron variant has presented new challenges. Thus, it is timely that the European Association for the Study of the Liver provides a summary of the latest data on the impact of COVID-19 on the liver and issues guidance on the care of patients with chronic liver disease, hepatobiliary cancer, and previous liver transplantation, as the world continues to deal with the consequences of the COVID-19 pandemic. [ABSTRACT FROM AUTHOR]

Illustration of the assembly, distribution, and point-of-care use of a rapidly-deployable, cell-free COVID-19 biosensor: 1) Assemble: Assembling CFPS reagents by mixing E. coli lysate, murine RNase Inhibitor (mRI), energy sources, cofactors, and toehold switch riboregulator plasmid. 2) Print: aliquoting CFPS reagents onto paper substrates housed in a plastic test cassette. 3) Dehydrate: lyophilizing CFPS reagents on paper substrates. 4) Distribute. 5) Saliva sample: applying saliva samples onto cassette without pretreatments. 6) Reaction: bioluminescent protein expression in presence of target RNA (+), or ribosome detachment in absence of target RNA (-). 7) Visual result: bioluminescent output in the presence of target RNA and NanoLuc luciferase expression. [Display omitted] • Progress towards a rapid, low-cost, point-of-care Covid-19 biosensor. • Engineered toehold switches respond to saliva enriched with SARS-CoV-2 RNA. • mRI enables robust paper-based cell-free protein synthesis in the presence of saliva. • Plastic cassette houses paper-based diagnostic test for simple distribution and use. The COVID-19 pandemic has illustrated the global demand for rapid, low-cost, widely distributable and point-of-care nucleic acid diagnostic technologies. Such technologies could help disrupt transmission, sustain economies and preserve health and lives during widespread infection. In contrast, conventional nucleic acid diagnostic procedures require trained personnel, complex laboratories, expensive equipment, and protracted processing times. In this work, lyophilized cell-free protein synthesis (CFPS) and toehold switch riboregulators are employed to develop a promising paper-based nucleic acid diagnostic platform activated simply by the addition of saliva. First, to facilitate distribution and deployment, an economical paper support matrix is identified and a mass-producible test cassette designed with integral saliva sample receptacles. Next, CFPS is optimized in the presence of saliva using murine RNase inhibitor. Finally, original toehold switch riboregulators are engineered to express the bioluminescent reporter NanoLuc in response to SARS-CoV-2 RNA sequences present in saliva samples. The biosensor generates a visible signal in as few as seven minutes following administration of 15 μL saliva enriched with high concentrations of SARS-CoV-2 RNA sequences. The estimated cost of this test is less than 0.50 USD, which could make this platform readily accessible to both the developed and developing world. While additional research is needed to decrease the limit of detection, this work represents important progress toward developing a diagnostic technology that is rapid, low-cost, distributable and deployable at the point-of-care by a layperson. [ABSTRACT FROM AUTHOR]

Using a monthly data between 2008 and 2019, this study investigated how the development of the Internet technologies has shaped the consumer consumption pattern of different types of paper products in China during this period. In detail, this study covers four major types of paper products in the Chinese market: newsprint, printing paper, household paper, and packaging paper. The developments of Internet technologies were decomposed into two aspects: the communication technology (CT) and the software platform technology (PT). Granger causality analysis was employed to determine whether the consumption pattern of paper products was affected by the development of the Internet. Furthermore, impulse-response analyses were utilized to measure how the consumption pattern of each paper product was shaped by the development of each aspect of Internet technologies, i.e., CT or PT. The empirical results suggested that the Internet developments are causing the consumption patterns shifts of all four paper products. Specifically, the consumptions of newsprint and printing paper were driven by both CT and PT. However, the consumptions of packaging paper and household paper were driven by the PT only. Compared to the development of CT, we found that the quick evolution of PT plays a more significant role in shifting people's consumption of paper products in China. The empirical results revealed by this study could provide valuable economics and policy implications to both academia and relevant industries. • Internet development has shifted the paper products consumption pattern in China. • Development of internet boosted the demand for printing paper and household paper. • Development of internet suppressed the demand for newsprint. • The effects of internet technological development are separated into two aspects. • Emerging Internet platforms shifted the consumption of paper products efficiently. [ABSTRACT FROM AUTHOR]

Background: Central to effective public health policy and practice is the trust between the population served and the governmental body leading health efforts, but that trust has eroded in the years preceding the pandemic. Vaccine hesitancy among adults is also a growing concern across the United States. Recent data suggest that the trustworthiness of information about the coronavirus 2019 (COVID-19) vaccine was a larger concern than the vaccine's adverse effects or risks.Objective: This study aims to describe the methods used to create a public health microinfluencer social media vaccine confidence campaign for the COVID-19 vaccine in underserved Tennessee communities. A secondary objective is to describe how the Social-Ecological Model (SEM) and Social Cognitive Theory may address vaccine hesitancy using community pharmacies.Methods: In late 2020, 50 independent community pharmacies in underserved communities across Tennessee were involved in a public health project with the State of Tennessee Department of Health and the University of Tennessee Health Science Center College of Pharmacy. The project involved a 3-pronged, pharmacy-based COVID-19 vaccination outreach project, including (1) social media messaging (i.e., microinfluencer approach), (2) community partner collaboration, and (3) in-pharmacy promotion. Quantitative and qualitative data will assess the quality and effectiveness of the program. Social media outcomes will also be assessed to measure the impact of the microinfluencer social media training.Results: Project implementation is planned for 6 months (January 2021 to June 2021) after an initial month of planning by the research team (December 2020) and preceding several months of assessment (July 2021 and beyond).Conclusions: Novel, theory-based approaches will be necessary to improve vaccine confidence. One approach to promoting public health, derived from the SEM, may be to use trusted microinfluencers on social media platforms, such as local community pharmacists and community leaders. [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel ChF/ZnO/CNT nano-hybrid was fabricated for detection of COVID-19. • Paper based aptasensor with colorimetric detection approach was developed. • Oxidation of TMB substrate by biosensor was detectable by naked eye sensitively. • The LOD of method was 0.05 pg/mL in colorimetric and 8 pg/mL in paper-based platform. Corona Virus Disease 2019 (COVID-19) as the infectious disease caused the pandemic disease around the world through infection by SARS-CoV-2 virus. The common diagnosis approach is Quantitative RT-PCR (qRT-PCR) which is time consuming and labor intensive. In the present study a novel colorimetric aptasensor was developed based on intrinsic catalytic activity of chitosan film embedded with ZnO/CNT (ChF/ZnO/CNT) on 3,3′,5,5′-tetramethylbenzidine (TMB) substrate. The main nanocomposite platform was constructed and functionalized with specific COVID-19 aptamer. The construction subjected with TMB substrate and H 2 O 2 in the presence of different concentration of COVID-19 virus. Separation of aptamer after binding with virus particles declined the nanozyme activity. Upon addition of virus concentration, the peroxidase like activity of developed platform and colorimetric signals of oxidized TMB decreased gradually. Under optimal conditions the nanozyme could detect the virus in the linear range of 1–500 pg mL and LOD of 0.05 pg mL. Also, a paper-based platform was used for set up the strategy on applicable device. The paper-based strategy showed a linear range between 50 and 500 pg mL with LOD of 8 pg mL. The applied paper based colorimetric strategy showed reliable results for sensitive and selective detection of COVID-19 virus with the cost-effective approach. [ABSTRACT FROM AUTHOR]

According to a recent World Health Organization estimate, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, which originated in China in 2019, has spread globally, infecting nearly 100 million people worldwide by January 2021. Patients with chronic liver diseases (CLD), particularly cirrhosis, hepatobiliary malignancies, candidates for liver transplantation, and immunosuppressed individuals after liver transplantation appear to be at increased risk of infections in general, which in turn translates into increased mortality. This is also the case for SARS-CoV-2 infection, where patients with cirrhosis, in particular, are at high risk of a severe COVID-19 course. Therefore, vaccination against various pathogens including SARS-CoV-2, administered as early as possible in patients with CLD, is an important protective measure. However, due to impaired immune responses in these patients, the immediate and long-term protective response through immunisation may be incomplete. The current SARS-CoV-2 pandemic has led to the exceptionally fast development of several vaccine candidates. A small number of these SARS-CoV-2 vaccine candidates have already undergone phase III, placebo-controlled, clinical trials in healthy individuals with proof of short-term safety, immunogenicity and efficacy. However, although regulatory agencies in the US and Europe have already approved some of these vaccines for clinical use, information on immunogenicity, duration of protection and long-term safety in patients with CLD, cirrhosis, hepatobiliary cancer and liver transplant recipients has yet to be generated. This review summarises the data on vaccine safety, immunogenicity, and efficacy in this patient population in general and discusses the implications of this knowledge on the introduction of the new SARS-CoV-2 vaccines. [ABSTRACT FROM AUTHOR]

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has become pandemic, reaching almost one million death worldwide. At present standard treatment for coronavirus disease 2019 (COVID-19) is not well defined because the evidence, either from randomized or observational studies, with conflicting results, has led to rapid changes in treatment guidelines. Our aim was to narratively summarize the available literature on the management of COVID-19 in order to combine current evidence and interpretation of the data by experts who are treating patients in the frontline setting. The panel conducted a detailed review of the literature and eventual press releases from randomized clinical trials for each possible available treatment. Inductive PubMed search waws performed for publications relevant to the topic, including all clinical trials conducted. The result was a flowchart with treatment indications for patients with COVID-19. After 6 months of a pandemic situation and before a possible second coronavirus wave descends on Europe, it is important to evaluate which drugs proved to be effective while also considering that results from many randomized clinical trials are still awaited. Indeed, among treatments for COVID-19, only glucocorticoids have resulted in an association with a significant decrease in mortality in published randomized controlled trials. New therapeutic strategies are urgently needed. [ABSTRACT FROM AUTHOR]

[Display omitted] • A rotational paper-based analytical device was designed for differential detection of SARS-CoV-2 and influenza A H1N1 virus. • The tetrahedral DNA framework could fix aptamer in a straightforward direction and well-defined spacing. • The strong affinity of aptamer toward target S protein and H1N1 ensured the specificity of this strategy. • The developed platform exhibited excellent analysis performance in terms of simple, rapid, low cost, disposability and high sensitivity. Coronavirus disease 2019 (COVID-19) and influenza A are two respiratory infectious diseases with similar clinical manifestations. Because of the complex global epidemic situation of COVID-19, the distinction and diagnosis of COVID-19 and influenza A infected persons is crucial for epidemic prevention and control. In this study, tetrahedral DNA framework (TDF) was combined with a rotational paper-based analytical device, and the color change generated by the reaction between horseradish peroxidase (HRP) and 3,3′5,5′-tetramethylbenzidine (TMB)–H 2 O 2 was used for grayscale signal analysis by ImageJ software. The quantitative detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and influenza A H1N1 virus were realized simultaneously. Under the optimal conditions, the paper-based analytical device showed a good linear relationship between the two viruses in the range of 10-14-10-8g/mL, and the two viruses were not affected by cross reaction. This sensor provides a convenient and reliable method for clinical rapid differentiation and diagnosis of COVID-19 and influenza A. [ABSTRACT FROM AUTHOR]

The recent pandemic events in Thailand, Covid-19 in 2018, demonstrated the need for an event-based smart monitoring system. While a distributed multi-level architecture has emerged as an architecture of choice for a larger-scale smart event-based system that requires better latency, security, scalability, and reliability, a recently introduced data mesh paradigm can add a few additional benefits. The paradigm enables each district to become an event-based smart monitoring mesh and handle its analytics and monitoring workload. Districts can form a set of domains in a network of event-based smart community monitoring systems and provide data products for others during a crisis. This paper presents a distributed data mesh paradigm for an event-based smart monitoring product in a given community with predefined domains. The paper presents smart monitoring as a data product between domains. Key considerations for designing an event-based smart monitoring data product are given. The author introduces three possible domains necessary for creating a smart monitoring system in each community. Each domain creates a data product for a given domain and shares data between domains. Finally, a three-layer analytics architecture for a smart monitoring product in each domain and a use case is presented. [ABSTRACT FROM AUTHOR]

This paper aims to analyze and understand the impact of the corona virus disease (COVID-19) on aviation and also the role aviation played in the spread of COVID-19, by reviewing the recent scientific literature. We have collected 110 papers on the subject published in the year 2020 and grouped them according to their major application domain, leading to the following categories: Analysis of the global air transportation system during COVID-19, the impacts on the passenger-centric flight experience, and the long-term impacts on broad aviation. Based on the aggregated reported findings in the literature, this paper concludes with a set of recommendations for future scientific directions; hopefully helping aviation to prepare for a post-COVID-19 world. • We give an overview of the COVID-19 impact on air transportation. • In total, 110 papers have been carefully studied, categorized, and reported. • We investigate airlines, passenger experience, and long-term impact. • We conclude our review paper with future research directions. [ABSTRACT FROM AUTHOR]

The article highlights a report on people with dyspnea following COVID-19 hospitalisation; and mentions that additional telerehabilitation is more effective at improving exercise capacity, muscle strength and the physical component of quality of life than education alone.

The article highlights a report on people with dyspnea following COVID-19 hospitalisation; and mentions that additional telerehabilitation is more effective at improving exercise capacity, muscle strength and the physical component of quality of life than education alone.

COVID-19 is a highly diffuse respiratory infection caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2). Currently, quantitative real-time polymerase chain reaction (qRT-PCR) technology is commonly used in clinical diagnosis of COVID-19. However, this method is time-consuming and labor-intensive, which is limited in clinical application. Here, we propose a new method for the ultrasensitive and visual detection of SARS-CoV-2 viral nucleic acid. The assay integrates with a paper device and highly efficient isothermal amplification technology - Netlike rolling circle amplification (NRCA), which can reach a limit of detection of 4.12 aM. The paper-based NRCA owns advantages of specificity, portability, visualization and low-cost. Therefore, this method can effectively meet the requirements of point-of-care testing, providing a novel molecular detection technology for clinical diagnosis of COVID-19 and promoting the development of NRCA devices. [Display omitted] ● A paper biosensor was used for ultrasensitive and visual detection of SARS-CoV-2. ● Amplified analysis has been achieved by netlike rolling circle amplification. ● The paper-based NRCA owns advantages of portability, visualization and low-cost. ● The assay can effectively meet the requirements of point-of-care diagnosis of COVID-19. [ABSTRACT FROM AUTHOR]

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a serious threat to human health. Current methods such as reverse transcription polymerase chain reaction (qRT-PCR) are complex, expensive, and time-consuming. Rapid, and simple screening methods for the detection of SARS-CoV-2 are critically required to fight the current pandemic. In this work we present a proof of concept for, a simple optical sensing method for the screening of SARS-CoV-2 through its spike protein subunit S1. The method utilizes a target-specific extractor chip to bind the protein from the biological specimens. The disulfide bonds of the protein are then reduced into a biothiol with sulfhydryl (SH) groups that react with a blue-colored benzothiazole azo dye-Hg complex (BAN-Hg) and causes the spontaneous change of its blue color to pink which is observable by the naked eye. A linear relationship between the intensity of the pink color and the logarithm of reduced S1 protein concentration was found within the working range 130 ng.mL−1-1.3 pg mL−1. The lowest limit of detection (LOD) of the assay was 130 fg mL−1. A paper based optical sensor was fabricated by loading the BAN-Hg sensor onto filter paper and used to screen the S1 protein in spiked saliva and patients' nasopharyngeal swabs. The results obtained by the paper sensor corroborated with those obtained by qRT-PCR. The new paper-based sensing method can be extended to the screening of many viruses (e.g. the human immunodeficiency virus, the human polyomavirus, the human papilloma virus, the adeno associated viruses, the enteroviruses) through the cysteine residues of their capsid proteins. The new method has strong potential for screening viruses at pathology labs and in remote areas that lacks advanced scientific infrastructure. Further clinical studies are warranted to validate the new sensing method. [Display omitted] • A proof of concept on an optical sensor for screening viruses through the capsid proteins. • The sensor was used to detect SARS-CoV-2 through the S1 protein. • The free cysteine of the protein causes the sensor color to change spontaneously. • The sensor detected the protein in biological specimens down to 130 fg mL−1 • The sensing method is rapid when compared to qRT-PCR. [ABSTRACT FROM AUTHOR]

• We examined panic buying and hoarding at the onset of the COVID-19 outbreak. • Perceived scarcity was the strongest predictor of panic buying. • Intolerance of uncertainty was the strongest predictor of hoarding. • Buying restrictions imposed by retailers may reduce panic buying. The COVID-19 pandemic led to panic buying in many countries across the globe, preventing vulnerable groups from accessing important necessities. Some reports inaccurately referred to the panic buying as hoarding. Although hoarding is a separate issue characterised by extreme saving behaviour, the two problems may be influenced by similar factors. Participants from Australia and the United States (final N = 359) completed online self-report measures of panic buying, hoarding, shopping patterns, perceived scarcity, COVID-19 illness anxiety, selfishness, and intolerance of uncertainty. Our findings showed that panic buying was related to hoarding symptoms (r 's =.23 -.36), and yet, both were uniquely associated with different psychological factors. Whilst panic buying was most strongly related to greater perceived scarcity (r 's =.38 -.60), hoarding was most related to a general intolerance of uncertainty (r 's =.24 -.57). Based on our findings, future strategies to prevent panic buying should focus on reducing perceived scarcity cues in the community, as this seems to be the primary driver of panic buying. Another preventative strategy to reduce excessive acquiring and saving may be to implement educational programs to increase people's ability to tolerate distress and uncertainty. [ABSTRACT FROM AUTHOR]

Coronavirus disease 2019 (COVID-19) has been recognized as a global pandemic outbreak, opening the most severe socio-economic crisis since World War II. Different scientific activities have been emerged in this global scenario, including the development of innovative analytical tools to measure nucleic acid, antibodies, and antigens in the nasopharyngeal swab, serum, and saliva for prompt identification of COVID-19 patients and to evaluate the immune response to the vaccine. The detection of SARS-CoV-2 in saliva remains a challenge for the lack of sufficient sensitivity. To address this issue, we developed a novel paper-based immunoassay using magnetic beads to support the immunological chain and 96-well wax-printed paper plate as a platform for color visualization by using a smartphone combined with Spotxel free-charge app. To assess the reliability of the measurement of SARS-CoV-2 in saliva, untreated saliva was used as a specimen and the calibration curve demonstrated a dynamic range up to 10 μg/mL, with a detection limit equal to 0.1 μg/mL. The effectiveness of this sustainable analytical tool in saliva was evaluated by comparing the data with the nasopharyngeal swab specimens sampled by the same patients and tested with Real-Time PCR reference method, founding 100% of agreement, even in the case of high Cycle Threshold (CT) numbers (low viral load). Furthermore, the positive saliva samples were characterized by the next-generation sequencing method, demonstrating the capability to detect the Delta variant, which is actually (July 2021) the most relevant variant of concern. • Colorimetric smartphone-assisted immunosensor for detection of SARS-CoV-2 in saliva. • Multiplex detection by paper-based immunosensor based on 96-well wax-printed paper. • Capability to detect the Delta variant, positive samples characterized by the NGS method. [ABSTRACT FROM AUTHOR]

This study aims to use a paper-based sensor array for point-of-care detection of COVID-19 diseases. Various chemical compounds such as nanoparticles, organic dyes and metal ion complexes were employed as sensing elements in the array fabrication, capturing the metabolites of human serum samples. The viral infection caused the type and concentration of serum compositions to change, resulting in different color responses for the infected and control samples. For this purpose, 118 serum samples of COVID-19 patients and non-COVID controls both men and women with the age range of 14–88 years were collected. The serum samples were initially subjected to the sensor, followed by monitoring the variation in the color of sensing elements for 5 min using a scanner. By taking into consideration the statistical information, this method was capable of discriminating COVID-19 patients and control samples with 83.0% accuracy. The variation of age did not influence the colorimetric patterns. The desirable correlation was observed between the sensor responses and viral load values calculated by the PCR test, proposing a rapid and facile way to estimate the disease severity. Compared to other rapid detection methods, the developed assay is cost-effective and user-friendly, allowing for screening COVID-19 diseases reliably. [Display omitted] • An optoelectronic tongue was fabricated by non-specific receptors for detection of serum metabolites. • The sensor was used to discriminate patients infected by COVID-19 from healthy controls. • The discrimination analysis was achieved by comparison between the total responses of patient and healthy classes. • The severity of the disease and the viral load associated with PCR analysis were estimated. [ABSTRACT FROM AUTHOR]

Respiratory viruses, especially coronaviruses, have resulted in worldwide pandemics in the past couple of decades. Saliva-based paper microfluidic assays represent an opportunity for noninvasive and rapid screening, yet both the sample matrix and test method come with unique challenges. In this work, we demonstrated the rapid and sensitive detection of SARS-CoV-2 from saliva samples, which could be simpler and more comfortable for patients than existing methods. Furthermore, we systematically investigated the components of saliva samples that affected assay performance. Using only a smartphone, an antibody-conjugated particle suspension, and a paper microfluidic chip, we made the assay user-friendly with minimal processing. Unlike the previously established flow rate assays that depended solely on the flow rate or distance, this unique assay analyzes the flow profile to determine infection status. Particle-target immunoagglutination changed the surface tension and subsequently the capillary flow velocity profile. A smartphone camera automatically measured the flow profile using a Python script, which was not affected by ambient light variations. The limit of detection (LOD) was 1 fg/μL SARS-CoV-2 from 1% saliva samples and 10 fg/μL from simulated saline gargle samples (15% saliva and 0.9% saline). This method was highly specific as demonstrated using influenza A/H1N1. The sample-to-answer assay time was <15 min, including <1-min capillary flow time. The overall accuracy was 89% with relatively clean clinical saline gargle samples. Despite some limitations with turbid clinical samples, this method presents a potential solution for rapid mass testing techniques during any infectious disease outbreak as soon as the antibodies become available. [ABSTRACT FROM AUTHOR]

Accurate, rapid, and low-cost molecular diagnostics is essential in managing outbreaks of infectious diseases, such as the pandemic of coronavirus disease 2019 (COVID-19). Accordingly, microfluidic paper-based analytical devices (μPADs) have emerged as promising diagnostic tools. Among the extensive efforts to improve the performance and usability of diagnostic tools, biosensing mechanisms based on electrochemical impedance spectroscopy (EIS) have shown great promise because of their label-free operation and high sensitivity. However, the method to improve EIS biosensing on μPADs is less explored. Here, we present an experimental approach to enhancing the performance of paper-based EIS biosensors featuring zinc oxide nanowires (ZnO NWs) directly grown on working electrodes (WEs). Through a comparison of different EIS settings and an examination of ZnO-NW effects on EIS measurements, we show that ZnO-NW-enhanced WEs function reliably with Faradaic processes utilizing iron-based electron mediators. We calibrate paper-based EIS biosensors with different morphologies of ZnO NWs and achieve a low limit of detection (0.4 pg ml−1) in detecting p24 antigen as a marker for human immunodeficiency virus (HIV). Through microscopic imaging and electrochemical characterization, we reveal that the morphological and the electrochemical surface areas of ZnO-NW-enhanced WEs indicate the sensitivities and sensing ranges of the EIS nanobiosensors. Finally, we report that the EIS nanobiosensors are capable of differentiating the concentrations (blank, 10 ng ml−1, 100 ng ml−1, and 1 μg ml−1) of IgG antibody (CR3022) to SARS-CoV-2 in human serum samples, demonstrating the efficacy of these devices for COVID-19 diagnosis. This work provides a methodology for the rational design of high-performance EIS μPADs and has the potential to facilitate diagnosis in pandemics. • Paper-based electrochemical impedance biosensors for accurate, rapid, and low-cost diagnostics of infectious diseases. • Zinc oxide nanowires (ZnO NWs) were directly synthesized on paper electrodes through hydrothermal growth. • Morphological and electrochemical surface areas of ZnO NWs on a working electrode affect the sensitivity and detection range of the electrochemical impedance biosensors. • Serological testing of IgG antibody (CR3022) to COVID-19 was demonstrated. [ABSTRACT FROM AUTHOR]

Coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is emerging as a global pandemic outbreak. To date, approximately one million deaths and over 32 million cases have been reported. This ongoing pandemic urgently requires an accurate testing device that can be used in the field in a fast manner. Serological assays to detect antibodies have been proven to be a great complement to the standard method of reverse transcription-polymerase chain reaction (RT-PCR), particularly after the second week of infection. We have developed a specific and sensitive immunosensor for immunoglobulin detection produced against SARS-CoV-2. Unlike other lateral flow-based assays (LFAs) involving the utilization of multiple antibodies, we have reported a label-free paper-based electrochemical platform targeting SARS-CoV-2 antibodies without the specific requirement of an antibody. The presence of SARS-CoV-2 antibodies will interrupt the redox conversion of the redox indicator, resulting in a decreased current response. This electrochemical sensor was proven effective in real clinical sera from patients with satisfactory results. In addition, the proposed format was also extended to antigen detection (the spike protein of SARS-CoV-2), which presents new possibilities for diagnosing COVID-19. • Electrochemical sensor for COVID-19 diagnostic. • Serological assay for SARS-CoV-2 antibodies was demonstrated. • Sensitivity enhancement compared to the traditional LFA devices. • Applicable to real clinical sera with satisfactory results. [ABSTRACT FROM AUTHOR]

Real-time reverse transcriptase-polymerase chain reaction (RT-PCR)-based assays are the gold standard for virus diagnosis. Point-of-care (POC) technologies have shown great progress during this period. Herein, we propose a novel fuchsine dye-loaded polymersome for a colorimetric paper-based dot blot spike protein diagnostic assay for COVID-19 via smartphone-assisted sensing. The prepared platform aimed to create an adaptable tool that competes with traditional nanoparticle-based assays employing gold and silver. Analytical characterization and application of the testing platform showed high sensitivity (10 times better than gold nanoparticles), stability, fast turnaround, and reproducibility. The potential and possibilities demonstrated by the current platform could be observed in its adaptability for different markers and pathologies. In addition, smartphone-assisted sensing emphasizes the ability to use the tool at home by common peoples which can lower the burden on the healthcare facilities and reach more underdeveloped regions. • Facile, quick, and sensitive colorimetric paper-based biosensor for COVID-19. • Platform is based on functionalized dye-loaded polymersome. • Polymersomes were more sensitive than silver-enhanced gold nanoparticles. • Higher stability, repeatability, and reproducibility. • The biosensor is adjustable for other diseases. [ABSTRACT FROM AUTHOR]

• Detection of cytokine storm biomarkers with mobile biosensors. • Immunosensors are made solely of cellulose modified with antibody-decorated nanoparticles. • Turnaround time under 10 min. • Detection of biomarkers in respiratory samples allows monitoring local inflammation. • Compatible with decentralized health care schemes. Decentralizing COVID-19 care reduces contagions and affords a better use of hospital resources. We introduce biosensors aimed at detecting severe cases of COVID-19 in decentralized healthcare settings. They consist of a paper immunosensor interfaced with a smartphone. The immunosensors have been designed to generate intense colorimetric signals when the sample contains ultralow concentrations of IL-6, which has been proposed as a prognosis biomarker of COVID-19. This is achieved by combining a paper-based signal amplification mechanism with polymer-filled reservoirs for dispensing antibody-decorated nanoparticles and a bespoken app for color quantification. With this design we achieved a low limit of detection (LOD) of 10−3 pg mL-1 and semi-quantitative measurements in a wide dynamic range between 10−3 and 102 pg mL-1 in PBS. The assay time is under 10 min. The low LOD allowed us to dilute blood samples and detect IL-6 with an LOD of 1.3 pg mL-1 and a dynamic range up to 102 pg mL-1. Following this protocol, we were able to stratify COVID-19 patients according to different blood levels of IL-6. We also report on the detection of IL-6 in respiratory samples (bronchial aspirate, BAS) from COVID-19 patients. The test could be easily adapted to detect other cytokines such as TNF-α and IL-8 by changing the antibodies decorating the nanoparticles accordingly. The ability of detecting cytokines in blood and respiratory samples paves the way for monitoring local inflammation in the lungs as well as systemic inflammation levels in the body. [ABSTRACT FROM AUTHOR]

Objective: Communication in healthcare has influenced and been influenced by the COVID-19 pandemic. In this position paper, we share observations based on the latest available evidence and experiential knowledge that have emerged during the pandemic, with a specific focus on policy and practice.Methods: This is a position paper that presents observations relating to policy and practice in communication in healthcare related to COVID-19.Results: Through our critical observations as experts in the field of healthcare communication, we share our stance how healthcare communication has occured during the pandemic and suggest possible ways of improving policy and professional practice. We make recommendations for policy makers, healthcare providers, and communication experts while also highlighting areas that merit further investigation regarding healthcare communication in times of healthcare crises.Conclusion: We have witnessed an upheaval of healthcare practice and the development of policy on-the-run. To ensure that policy and practice are evidence-based, person-centred, more inclusive and equitable, we advocate for critical reflection on this symbiotic relationship between COVID-19 and the central role of communication in healthcare.Practice Implications: This paper provides a summary of the key areas for development in communication in healthcare during COVID-19. It offers recommendations for improvement and a call to review policies and practice to build resilience and inclusive and equitable responsiveness in communication in healthcare. [ABSTRACT FROM AUTHOR]

The importance of user-friendly, inexpensive, sensitive, and selective detection of viruses has been highlighted again due to the recent Coronavirus disease 2019 (COVID-19) pandemic. Among the analytical tools, paper-based devices (PADs) have become a leading alternative for point-of-care (POC) testing. In this review, we discuss the recent development strategies and applications in nucleic acid-based, antibody/antigen-based and other affinity-based PADs using optical and electrochemical detection methods for sensing viruses. In addition, advantages and drawbacks of presented PADs are identified. Current state and insights towards future perspectives are presented regarding developing POC diagnosis platform for COVID-19. This review considers state-of-the-art technologies for further development and improvement in PADs performance for virus detection. [Display omitted] • Reviewed developments in PADs for optical and electrochemical detection of viruses. • Highlighted recent applications in antibody/antigen-, nucleic acid-, aptamer- and CRISPR-based PADs for viral detection. • Emphasized low-cost POC diagnostic tools to control the global COVID-19 pandemic. [ABSTRACT FROM AUTHOR]

The microfluidic paper-based analytical devices (μPADs) have grown-up swiftly over the decade due to its low cost, simple fabrication procedure, resource-limitedness, non-toxicity and their environmentally benign nature. The μPADs, also identified as point-of-care devices or health care devices have successfully applied in several fields such as diagnostics, biological, food safety, environmental, electrochemical and most importantly colorimetric/fluorimetric sensors, owing to the attractive passive motions of analyte without any external forces. In recent years, a large number of colorimetric and fluorimetric probes have been reported that can selectively recognize the analytes in μPADs. However, there is no organized review on its structure-activity relationship. In this review, we have focused to summarize the colorimetric and fluorimetric probes utilized in μPADs. This review discuss about the relationships between the structure and functions of various probes as signaling units of the efficient μPADs. The probes including nanomaterials, nanozymes, polymers and organic molecules, their structural activity with regard to sensing performances along with their limit of detection are also discussed. This review is expected to assist readers for better understanding of the sensing mechanisms of various chemo and bio-probes utilized in μPADs, as well as promote their advancement in the field. On the other hand, this review also helps the researchers for enhancement of μPADs and paves way for synergistic application of existing molecular probes as an effective diagnostic tool for the worldwide pandemic novel corona virus COVID-19. [Display omitted] • Traditional fabrications methods for µPADs are summarized. • Discusses about the hindrances of commercial wax printing method for fabrication of µPADs. • Various sensory materials are categorized and discussed along with their structure activity properties. • Highlights about the most promising material that could be a probable probe for µPADs. • The vision towards employing µPADs for COVID19 diagnosis is also discussed. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has highlighted the need for diversity in the market and alternative materials for personal protective equipment (PPE). Paper has high coatability for tunable barrier performance, and an agile production process, making it a potential substitute for polyolefin-derived PPE materials. Bleached and newsprint papers were laminated with polyethylene (PE) coatings of different thicknesses, and characterised for their potential use as medical gowns for healthcare workers and COVID-19 patients. Thicker PE lamination improved coating homogeneity and water vapour resistance. 49 GSM bleached paper with 16 GSM PE coating showed high tensile and seam strength, and low water vapour transmission rate (WVTR). Phi-X174 bacteriophage testing revealed that paper laminated with 15 GSM coating hinders virus penetration. This research demonstrates that PE laminated paper is a promising material for low cost viral protective gowns. [Display omitted] • Polyethylene (PE) laminated bleached paper was assessed as a medical gown material. • High tensile and seam strength were achieved for the laminate composites. • Viral penetration was hindered by a 49 GSM paper sheet with a 15 GSM PE coating. • The laminated paper met medical gown material testing standards. • Prototypes were praised by medical professionals when worn in a clinical setting. [ABSTRACT FROM AUTHOR]

The pervasive spread of infectious diseases and pandemics, such as the 2019 coronavirus disease (COVID-19), are becoming increasingly serious and urgent threats to human health. Preventing the spread of such diseases prioritizes the development of sensing devices that can rapidly, selectively, and reliably detect pathogens at minimal cost. Paper-based analytical devices (PADs) are promising tools that satisfy those criteria. Numerous paper-based biosensors have been established that rival conventional pathogen detection methods. Among them, colorimetric strategies are promising since results can be interpreted by eye, and are simple to operate, which is advantageous for point-of-care testing (POCT). Particularly, the application of nanomaterials on paper-based biosensors has become important as these materials are capable of converting signals from pathogens through unique mechanisms to yield an amplified colorimetric readout. To highlight the research progress on using nanomaterials in colorimetric paper-based biosensor for pathogen detection, we discuss the sensing mechanisms of how they work, structural and analytical characteristics of the devices, and representative recent applications. Current challenges and future directions of using PADs and nanomaterial-mediated strategies are also discussed. Image 1 • Recent developments in paper-based analytical devices for colorimetric detection of pathogens are reviewed in detail. • Three main types of point-of-care paper-based devices are exploited for robust performance in pathogen detection. • Colorimetric strategies are sensitive and offer fast response and convenience to end-users. • Diverse nanomaterials are deployed for both signal transduction and amplification to enhance sensitivity. • Sensing mechanisms fundamental to colorimetric pathogen detection are discussed. [ABSTRACT FROM AUTHOR]