Search

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

NiFe2O4 material is grown on carbon paper (CP) with the hydrothermal method for use as electrocatalysts in an alkaline electrolyzer. NiFe2O4 material is used as the anode and cathode catalysts (named NiFe(+)/NiFe(−) hereafter). The results are compared with those obtained using CP/NiFe as the anode and CP/Ru as the cathode (named NiFe)(+)/Ru(−) hereafter). During cell operation with NiFe(+)/Ru(−), the current density reaches 500 mA/cm2 at a cell voltage of 1.79 V, with a specific energy consumption of 4.9 kWh/m3 and an energy efficiency of 66.2%. In comparison, for NiFe(+)/NiFe(−), the current density reaches 500 mA/cm2 at a cell voltage of 2.23 V, with a specific energy consumption of 5.7 kWh/m3 and an energy efficiency of 56.6%. The Faradaic efficiency is 96–99%. With the current density fixed at 400 mA/cm2, after performing a test for 150 h, the cell voltage with NiFe(+)/Ru(−) increases by 0.167 V, whereas that with NiFe(+)/NiFe(−) decreases by only 0.010 V. Good, long-term stability is demonstrated. [ABSTRACT FROM AUTHOR]

The article presents studies on the impact of the significant process parameters of a paper machine with a Yankee cylinder on its production capacity and heat energy consumption for drying the paper web. Parameters such as machine speed, web moisture content before and after pressing, parameters of steam supplied to the cylinder and parameters of hot air flowing from the nozzles of the hood were analyzed. The study's results were used to optimize production to improve the energy efficiency and performance of the machine. In order to use the possible methods of improving the production capacity and heat energy consumption, the parameters of the production process were measured and the basic indicators characterizing the operation of the machine were calculated in the Yankee cylinder–dryer hood system. The correct functioning of the machine components and the possibility of their modernization were also analyzed. Technological and construction changes introduced based on the research results made it possible to increase the production capacity by 10% and to reduce the consumption of heat energy per 1 ton of produced paper by 16.3%. The article presents a description of changes in the technology of paper production and modernization of the tissue machine made in the years 2013–2022. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

In the field of intelligent transportation, the planning of traffic flows that meet energy-efficient driving requirements necessitates the acquisition of energy consumption data for each vehicle within the traffic flow. The current methods for calculating vehicle energy consumption generally rely on longitudinal dynamics models, which require comprehensive knowledge of all vehicle power system parameters. While this approach is feasible for individual vehicle models, it becomes impractical for a large number of vehicle types. This paper proposes a digital model for vehicle driving energy consumption using vehicle speed, acceleration, and battery state of charge (SOC) as inputs and energy consumption as output. The model is trained using an optimized CNN-BiLSTM-Attention (OCBA) network architecture. In comparison to other methods, the OCBA-trained model for predicting PHEV driving energy consumption is more accurate in simulating the time-dependency between SOC and instantaneous fuel and power consumption, as well as the power distribution relationship within PHEVs. This provides an excellent framework for the digital modeling of complex power systems with multiple power sources. The model requires only 54 vehicle tests for training, which is significantly fewer than over 2000 tests typically needed to obtain parameters for power system components. The model's prediction error for fuel consumption under unknown conditions is reduced to 5%, outperforming the standard error benchmark of 10%. Furthermore, the model demonstrates high generalization capability with an R2 value of 0.97 for unknown conditions. [ABSTRACT FROM AUTHOR]

Recently, as the use of wearable devices and the demand for eco-friendly energy have increased, many studies have been conducted on triboelectric nanogenerators (TENGs), which can economically harvest energy. Paper is considered a promising substrate and frame material that can be used to manufacture self-powered TENGs, owing to its flexibility, low cost, and accessibility. Herein, we present a sandwich-structured foldable paper-based TENG (FP-TENG) that comprises flexible materials and uses paper as a substrate. The FP-TENG can generate up to 572 mW/m2 of power via contact–separation of the triboelectric electrified body at the top and bottom. With more folds of the FP-TENG, the triboelectric cross-sectional area increases, and, thus, the electrical output increases. In addition, the proposed TENG exhibits excellent durability without signal degradation under 5000 cycles of repeated pushing motions. To demonstrate its practicality, the FP-TENG was manufactured in the form of a wristwatch Velcro and connected to an electronic watch panel to supply power. Various deformations are possible with origami, and they can drive wristwatches through external forces. Therefore, the FP-TENG is expected to be utilized as a sustainable and promising eco-friendly energy source for small electronic devices. [ABSTRACT FROM AUTHOR]

Black-liquor-thickening in an integrated multi-effect evaporation plant consumes substantial amounts of steam produced in pulp and paper mills, and its efficient operation is, thus, crucial. Industrial applications of heat pumps in the pulp and paper industry, especially in black liquor evaporation, show promise in terms of cutting energy consumption and in decarbonizing this industrial branch. Modelling of such a plant includes momentum, heat and mass transfer issues, enriched with black liquor material specification. An existing black liquor evaporation plant which thickens inlet black liquor from 17% to 75% wt. dry solids with a dry solid flow of 2500 tonnes per day is considered. It already includes a MVR (mechanical vapor recompression) pre-evaporator as well as water-condensate stripping columns. A mathematical model of this plant is created in a Matlab environment and, after verification of obtained results, it serves for analyses of possible plant modifications. Among the modification options, installation of a second MVR is modeled and its impact on the whole plant is examined. As a result, a differential (marginal) change in steam and electricity consumed in the plant is obtained. Model results indicate the possibility of a reduction of process steam consumption of around 10 tonnes per hour and an increase in electricity consumption of 600 kW. A favorable simple payback period of 2.5 years can be expected for the considered investment. [ABSTRACT FROM AUTHOR]

Carbon containing waste has a certain calorific value and utilization value due to the presence of carbon elements. However, the current treatment methods are mostly traditional landfill disposal, incineration, or expensive physical and chemical reaction methods, which clearly do not comply with the rules of the current clean and resource-saving society. In this paper, a new technology and system for carbon containing wastes is proposed, which comprehensively treats and recycles carbon containing wastes, including solid waste, wastewater, waste gas, etc., using pyrolysis–gasification two-stage-cycle technology. The calculation results indicate that the technical scheme proposed in this article is feasible and can achieve the recycling of intermediate and final products, the efficient and clean utilization of carbon containing waste, and the graded utilization of energy. The clean utilization rate of carbon containing waste can be effectively improved, the energy consumption and cost of separate treatments can be reduced, and zero waste emissions can be completely achieved by the comprehensive pyrolysis–gasification two-stage-cycle treatment and resource utilization technology, which is one of the preferred solutions for future resource-saving societies. [ABSTRACT FROM AUTHOR]

Internet of Things (IoT) architectures generally focus on providing consistent performance and reliable communications. The convergence of IoT, edge, fog, and cloud aims to improve the quality of service of applications, which does not typically emphasize energy efficiency. Considering energy in IoT architectures would reduce the energy impact from billions of IoT devices. The research presented in this paper proposes an optimization framework that considers energy consumption of nodes when selecting a node for processing an IoT request in edge-fog-cloud layered architecture. The IoT use cases considered in this paper include smart grid, autonomous vehicles, and eHealth. The proposed framework is evaluated using CPLEX simulations. The results provide insights into mechanisms that can be used to select nodes energy-efficiently whilst meeting the application requirements and other network constraints in multi-layered IoT architectures. [ABSTRACT FROM AUTHOR]

This study explored the association between renewable energy uptake and digitalization in the sector by reviewing relevant literature (published 2010–2022), with the aim of identifying the existing utilization of digital technologies within the sector, challenges to adoption, and future prospects. Different search engines (SCOPUS, Web of Science, and Google Scholar) were used to locate relevant papers and documents. The results revealed the high significance of digital technologies in supporting the renewable energy sector, with high costs and security risks representing the key challenges. Most papers reviewed had a positive outlook, but recommended further research and development for effective energy transition and resilient infrastructure. The current drivers of the integration of digital technologies to support the diffusion of renewable energy sources appear to extend beyond energy demand and involve many aspects of sustainability and sustainable development. Compared with previous reviews, this work has unique scope and novelty since it considers the bigger picture of the coupling between digitalization and the renewable energy sector, with a greater focus on critical areas in these two interconnected bodies that need to be addressed. The relatively small sample of relevant papers (69 from 836 hits) located in the literature review confirms the need for more research covering the subject in greater depth. [ABSTRACT FROM AUTHOR]

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

Grid-connected photovoltaic (PV) power systems are one of the most promising technologies to address growing energy demand and ecological challenges. This paper proposes smart switching to mitigate inrush currents during the connection of single-phase transformers used in PV systems. An effective inrush current mitigation contributes to the reliability of PV systems. The inrush current severity is influenced by the pseudorandom residual flux at the transformer core and the energization point-on-wave. The most common approach to avoid inrush currents is controlled connection, which requires prior knowledge of the residual flux. However, the residual flux can differ in each case, and its measurement or estimation can be impractical. The proposed smart switching is based on a comprehensive analysis of the residual flux and the de-energization trajectories, and only requires two pieces of data (ϕRM and ϕ0, flux values of the static and dynamic loops when the respective currents are null), calculated from two simple no-load tests. It has a clear advantage over common approaches: no need to estimate or measure the residual flux before each connection, avoiding the need for expensive equipment or complex setups. Smart switching can be easily implemented in practical settings, as it considers different circuit breakers with distinctive aperture features, making it cost-effective for PV systems. [ABSTRACT FROM AUTHOR]

The effective scaling-up of redox flow batteries (RFBs) can be facilitated upon lowering the capital costs. The application of ubiquitous manganese along with hydrogen (known as H2−Mn regenerative fuel cells (RFC)) is seen as an effective solution for this purpose. Here, we aim to evaluate different positive electrodes so as to improve the key performance metrics of the H2/Mn RFC, namely electrolyte utilization, energy efficiency, and peak power densities. Commercially available carbon paper and graphite felt are used to show that the latter provides better key performance indicators (KPIs), which is consistent with the results reported for standard all-vanadium RFBs in the literature. Even better KPIs are obtained when an in-house carbon catalyst layer (CCL) is employed in combination with graphite felt electrodes (e.g., more than 80% energy efficiency, >0.5 W cm−2 peak power density and electrolyte utilization of 20 Ah L−1 for felt and carbon metal fabric (CMF), prepared by means of electrospinning and carbonization, in comparison with about 75% energy efficiency 0.45 W cm−2 peak power density and 11 Ah L−1 electrolyte utilization for felt on its own). It is envisaged that if the electrochemical performance of CCLs can be optimized then it could open up new opportunities for the commercial exploitation of H2−Mn systems. [ABSTRACT FROM AUTHOR]

The pulp and paper (P&P) sector is a dynamic manufacturing industry and plays an essential role in the Austrian economy. However, the sector, which consumes about 20 TWh of final energy, is responsible for 7% of Austria's industrial CO2 emissions. This study, intending to assess the potential for improving energy efficiency and reducing emissions in the Austrian context in the P&P sector, uses a bottom-up approach model. The model is applied to analyze the energy consumption (heat and electricity) and CO2 emissions in the main processes, related to the P&P production from virgin or recycled fibers. Afterward, technological options to reduce energy consumption and fossil CO2 emissions for P&P production are investigated, and various low-carbon technologies are applied to the model. For each of the selected technologies, the potential of emission reduction and energy savings up to 2050 is estimated. Finally, a series of low-carbon technology-based scenarios are developed and evaluated. These scenarios' content is based on the improvement potential associated with the various processes of different paper grades. The results reveal that the investigated technologies applied in the production process (chemical pulping and paper drying) have a minor impact on CO2 emission reduction (maximum 10% due to applying an impulse dryer). In contrast, steam supply electrification, by replacing fossil fuel boilers with direct heat supply (such as commercial electric boilers or heat pumps), enables reducing emissions by up to 75%. This means that the goal of 100% CO2 emission reduction by 2050 cannot be reached with one method alone. Consequently, a combination of technologies, particularly with the electrification of the steam supply, along with the use of carbon-free electricity generated by renewable energy, appears to be essential. [ABSTRACT FROM AUTHOR]

Industrial energy efficiency has received increasing attention in many countries because of its importance in the pursuit of energy supply security, increased economic competitiveness and in the mitigation of greenhouse gases emissions. This paper aimed to evaluate the energy consumption development of the Brazilian pulp and paper industry through an energy decomposition analysis and an energy efficiency index approach over a 30 years period. An international comparison with other important paper-producing countries (i.e., Canada, United States of America, Finland and Sweden) was carried out. It was concluded that despite a significant increase in the energy efficiency levels, responsible for 5.6 PJ savings in electricity consumption and for 38.6 PJ savings in fuels consumption between 1979 and 2009, a saving potential of 7.8 PJ and 146.2 PJ related to the annual consumption of electricity and fuels, respectively, could be identified in the Brazilian pulp and paper industry. Among the countries evolved in the international comparison, both the Swedish and Finnish industries were the most efficient, followed by the Brazilian, American and Canadian, the latter being the only one where there was a reduction in the energy efficiency levels from 1979 to 2009. [ABSTRACT FROM AUTHOR]

Paper can be reused to efficiently manage biomass consumption, meaning that it has potential as an environmentally friendly material. On the other hand, because of high energy usage during the recycling process and transportation inefficiencies, there is a call for the development of technologies that can mitigate this environmental burden. This study evaluated, from a lifecycle perspective, a new technology that can collect and recycle paper within the office. This technology can reduce by over 90% the amount of water used compared with the conventional recycled paper that is pulped and bleached once by the dry process. It also eliminates transportation from paper collection facilities to recycling factories, reducing greenhouse gas emissions. This new technology is already in use in Japan, and analyses by user data indicate that evaluation results differ greatly depending on the utilization rate of the machine. In the future, environmental information should be shared by both users and manufacturers, so that users could increase their utilization rate, and manufacturers could develop alternative bonding agents in order to further reduce the total environmental burden. [ABSTRACT FROM AUTHOR]

Improving energy efficiency is an effective way to address the issues of economic development, energy saving and emissions reduction. For any important industries it is therefore necessary to measure energy efficiency and set a practical target for it. In this paper, we use CCR, SBM and energy intensity to measure the energy efficiency of the paper industries of 22 EU countries. Results indicate that the SBM and CCR efficiency value is more meaningful for policy makers than that of energy intensity, as measurement results of energy intensity deviate from reality and economic efficiency. The CCR and SBM have roughly the same fluctuation trends and the average SBM energy efficiency value is 0.71, always 10 percent lower than CCR model, as it takes simultaneous account of both the optimal input-output and has more discriminatory power in efficiency measurement. Furthermore, EU policy makers could improve energy efficiency by raising energy prices. As for the 2030 EU target of energy saving and emission reduction, the EU should pay more attention to five major paper producers: Finland, Sweden, Germany, the United Kingdom and Italy. [ABSTRACT FROM AUTHOR]

A key challenge in prevention of global warming is how to increase energy efficiency, to be able to deal with increased fossil CO2 emissions from rising energy usage. Increasing energy efficiency will decrease energy usage and is in a key role in emission mitigation. The focus is the pulp and paper industry, which is energy-intensive. Development of industrial energy efficiency has been studied before but the role of industrial transformation is still mostly unknown. The knowledge must be improved, to be able to predict future developments in the most effective way. In this research, impact of various production unit closures and start-ups on energy efficiency of the Finnish pulp and paper industry were studied utilizing statistical analysis. Results indicate that about 20% of the Finnish pulp and paper industry energy efficiency improvement between 2011 and 2017 is caused by the major structural changes. The rest, 80% of the progress, was mainly due to improved technology and more optimal operational modes. Additional findings suggest that modern mill start-ups have a significantly greater potential to reduce energy consumption than old mill closures. [ABSTRACT FROM AUTHOR]

The European Commission has mandated the use of digital building logbooks (DBL) to encourage deep energy renovations and overcome barriers in building renovations. The current energy performance certificates (EPCs) focus on operational energy consumption, whereas the DBL will cover the entire life cycle of buildings and provide a more comprehensive evaluation of buildings, through providing a passport rating in three domains: energy performance, sustainability, and smartness. This paper defines the digital building logbook (DBL) data structure within the context of the EUB SuperHub, a three-year project financed by the European Union under the Horizon 2020 program. The creation of the EUB SuperHub DBL data structure involved an extensive review of relevant literature, including existing DBL data structures developed in previous EU projects (iBRoad, ALDREN, BIM4EEB, X-tendo), recommendations from the "Study on the Development of an EU Framework for Buildings' Digital Logbook", requirements specified in the grant agreement, existing EU legislation, and anticipated future legislation. The proposed digital building logbook data structure for the EUB SuperHub project comprises eight primary categories and is designed to provide all the essential input data needed throughout the building's life cycle to compute the passport rating across three domains: energy efficiency, sustainability, and smartness. With the requirements stipulated in existing and soon-to-be-adopted EU legislation, the introduction of a digital building logbook has become a necessity. Though the undertaking is a formidable task and will require considerable effort, its benefits are numerous and promising, including the potential to enhance energy renovation rates. [ABSTRACT FROM AUTHOR]

It is now well-established that moisture in the oil paper insulation used in power and instrument transformers significantly reduces the transformers' lifetimes, and can eventually lead to premature failure. This moisture should, therefore, always be removed, not only during production but also after repairs. At the final stage of manufacturing, the drying process should be carried out to remove water and air vacuoles contained in the cellulose-based paper before impregnation. Successful drying helps increase the residual life of transformers, because the presence of moisture and air vacuoles accelerates the aging/degradation process of the oil paper insulation. Proper estimation of residual moisture before impregnation and the determination of the time required for drying play key roles in the time-consuming process of drying. In this paper, the disadvantages of inadequate drying are addressed, followed by a mathematical approach to model the paper drying process. A mathematical model describing the kinetics of drying according to temperature, initial moisture, paper weight, final moisture, and extraction rate is proposed. This model also estimated the amount of moisture removed at the end of the drying process. [ABSTRACT FROM AUTHOR]

In recent decades, artificial intelligence has undergone transformative advancements, reshaping diverse sectors such as healthcare, transport, agriculture, energy, and the media. Despite the enthusiasm surrounding AI's potential, concerns persist about its potential negative impacts, including substantial energy consumption and ethical challenges. This paper critically reviews the evolving landscape of AI sustainability, addressing economic, social, and environmental dimensions. The literature is systematically categorized into "Sustainability of AI" and "AI for Sustainability", revealing a balanced perspective between the two. The study also identifies a notable trend towards holistic approaches, with a surge in publications and empirical studies since 2019, signaling the field's maturity. Future research directions emphasize delving into the relatively under-explored economic dimension, aligning with the United Nations' Sustainable Development Goals (SDGs), and addressing stakeholders' influence. [ABSTRACT FROM AUTHOR]

Paper as a consumer product offers a undisputed benefits to human society, and it has been proven to be critical in driving most sensitive needs of mankind—principally in areas of security, education, sanitation, and communication—and thus has been produced and consumed worldwide. Its sustainable production and usage is one topic that has featured prominently in many discussion fronts and more often than not ends with recommendations for an alternative source of raw material, improvement in production procedures, and ecological concerns. Paper use is an ecological concern that has triggered many paper intervention actions around the world such as the Paper Task Force in USA, Sustainable Paper Alliance in China, and Paper and Beyond in Europe. In Nigeria, however, challenges associated with paper production, consumption, and economic prospects have not been adequately tackled. This is conspicuously evident in the huge volume of paper products imported annually into the country as a result of unsustainable local production. The cumulative impact of these issues reflect negatively on the Nigeria's paper industry and spread indirectly to the entire country's economy in terms of high capital freight spent on importation, volatile product price, and loss of employment opportunities. This work sought to review the challenges and opportunities associated with raw material sources, energy and water consumption, environmental pollution, paper consumption, and disposal of used paper products in Nigeria. The current review also advocated for wastepaper as a variant of raw material with a sustainable potential. [ABSTRACT FROM AUTHOR]

Power grids in the 21st century face unprecedented challenges, including the urgent need to combat pollution, mitigate climate change, manage dwindling fossil fuel reserves, integrate renewable energy sources, and meet greater energy demand due to higher living standards. These challenges create heightened uncertainty, driven by the intermittent nature of renewables and surges in energy consumption, necessitating adaptable demand response (DR) strategies. This study addresses this urgent situation based on a statistical analysis of recent scientific research papers. It evaluates the current trends and DR practices in buildings, recognizing their pivotal role in achieving energy supply–demand equilibrium. The study analysis provides insight into building types, sample sizes, DR modeling approaches, and management strategies. The paper reveals specific research gaps, particularly the need for more detailed investigations encompassing building types and leveraging larger datasets. It underscores the potential benefits of adopting a multifaceted approach by combining multiple DR management strategies to optimize demand-side management. The findings presented in this paper can provide information to and guide future studies, policymaking, and decision-making processes to assess the practical potential of demand response in buildings and ultimately contribute to more resilient and sustainable energy systems. [ABSTRACT FROM AUTHOR]

This paper presents a shock detection device for packages in the supply chain. The primary purpose is to identify package damage during storage, delivery, and handling. Additionally, products are likely to be damaged if dropped from a certain height, which sometimes does not appear on the package. By continuously measuring package vibrations and detecting shocks in the supply chain, consumers can gain an insight into the state of the product upon delivery. This paper presents the Smart Sticker implementation for ultra-low-power shock detection in the supply chain. The overall energy consumption must be kept as low as possible while continuously sensing the presence of shock to ensure that the Smart Sticker's battery lasts as long as possible. The Smart Sticker functions in three modes to meet the established constraints: low-power, active, and data transfer mode. While detecting the shock, the low-power mode uses the least amount of energy needed. If the shock exceeds the threshold, the Smart Sticker enters active mode, stores the detected g force value in memory, and then switches back to low-power mode. Finally, employing Near Field Communication (NFC) and energy harvesting, the data transfer mode allows the consumer to read the recorded data. The results show that the Smart Sticker for shock detection performs according to set requirements and successfully monitors and detects shock for packages in the supply chain. [ABSTRACT FROM AUTHOR]

With the global energy crisis and environmental pollution intensifying, tissue papermaking enterprises urgently need to save energy. The energy consumption model is essential for the energy saving of tissue paper machines. The energy consumption of tissue paper machine is very complicated, and the workload and difficulty of using the mechanism model to establish the energy consumption model of tissue paper machine are very large. Therefore, this article aims to build an empirical energy consumption model for tissue paper machines. The energy consumption of this model includes electricity consumption and steam consumption. Since the process parameters have a great influence on the energy consumption of the tissue paper machines, this study uses three methods: linear regression, artificial neural network and extreme gradient boosting tree to establish the relationship between process parameters and power consumption, and process parameters and steam consumption. Then, the best power consumption model and the best steam consumption model are selected from the models established by linear regression, artificial neural network and the extreme gradient boosting tree. Further, they are combined into the energy consumption model of the tissue paper machine. Finally, the models established by the three methods are evaluated. The experimental results show that using the empirical model for tissue paper machine energy consumption modeling is feasible. The result also indicates that the power consumption model and steam consumption model established by the extreme gradient boosting tree are better than the models established by linear regression and artificial neural network. The experimental results show that the power consumption model and steam consumption model established by the extreme gradient boosting tree are better than the models established by linear regression and artificial neural network. The mean absolute percentage error of the electricity consumption model and the steam consumption model built by the extreme gradient boosting tree is approximately 2.72 and 1.87, respectively. The root mean square errors of these two models are about 4.74 and 0.03, respectively. The result also indicates that using the empirical model for tissue paper machine energy consumption modeling is feasible, and the extreme gradient boosting tree is an efficient method for modeling energy consumption of tissue paper machines. [ABSTRACT FROM AUTHOR]

The sugarcane industry has assumed an increasingly important role at a global level, with countries such as Brazil and India dominating the field. However, this causes environmental problems, since the industry produces large amounts of waste, such as sugarcane bagasse. This by-product, which is energetically partially recovered in sugar mills and in the pulp and paper industry, can make a significant contribution to the general use of biomass energy, if the usual disadvantages associated with products with low density and a high moisture content are overcome. From this perspective, thermochemical conversion technologies, especially torrefaction, are assumed to be capable of improving the fuel properties of this material, making it more appealing for potential export and use in far-off destinations. In this work, sugarcane samples were acquired, and the process of obtaining bagasse was simulated. Subsequently, the bagasse was dried and heat-treated at 200 and 300 °C to simulate the over-drying and torrefaction process. Afterward, product characterization was performed, including thermogravimetric analysis, elemental analysis, calorimetry, and energy densification. The results showed significant improvements in the energy content, from 18.17 to 33.36 MJ·kg−1 from dried bagasse to torrefied bagasse at 300 °C, showing that despite high mass loss, there is potential for a future value added chain for this waste form, since the increment in energy density could enhance its transportation and use in locations far off the production site. [ABSTRACT FROM AUTHOR]

This paper addresses the challenges in forecasting electrical energy in the current era of renewable energy integration. It reviews advanced adaptive forecasting methodologies while also analyzing the evolution of research in this field through bibliometric analysis. The review highlights the key contributions and limitations of current models with an emphasis on the challenges of traditional methods. The analysis reveals that Long Short-Term Memory (LSTM) networks, optimization techniques, and deep learning have the potential to model the dynamic nature of energy consumption, but they also have higher computational demands and data requirements. This review aims to offer a balanced view of current advancements and challenges in forecasting methods, guiding researchers, policymakers, and industry experts. It advocates for collaborative innovation in adaptive methodologies to enhance forecasting accuracy and support the development of resilient, sustainable energy systems. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive bibliometric review and visualization of smart and sustainable energy consumption, delving into the challenges and opportunities of developing renewable and non-renewable energy sources. The study examines research trends and emerging themes about integrating smart solutions and sustainable energy resource consumption. The analytical methods used involve thoroughly analyzing empirical data, case studies, and review papers to map the research landscape. The results highlight dominant research topics, influential authors, and publication timelines in this field. The review identifies the key challenges in harnessing renewable and non-renewable energy sources, including the need for reliable energy sources, energy storage systems, and smart grid technologies. The paper concludes with insights into the most effective practices for promoting smart and energy-efficient methods while emphasizing the complexity of sustainable energy solutions. [ABSTRACT FROM AUTHOR]

Transitioning to clean cooking fuels is not only part of achieving SDG7 but also makes a significant contribution to mitigating climate change by reducing carbon emissions. Research projects and pilots across a number of countries in Africa and South Asia have been exploring the suitability and energy performance of different cooking appliances and fuels. The paper presents the first statistical analysis across these multiple datasets to determine the range of energy required to cook dishes using different technologies and fuels. The paper draws out distinctions between African and Asian dishes, notably the impact of energy-intensive dishes prepared mostly in Africa. The paper demonstrates that the standard efficiency-based approaches to comparing the performance of stoves are not appropriate to modern electric cooking devices, so a novel alternative approach based on specific energy consumption and termed energy ratios is developed. Charcoal stoves are shown to use 15 times as much energy as electric pressure cookers (EPCs) to cook African dishes, and a detailed review of how the EPC works explains why this should be. Energy ratios provide a basis for estimating carbon emission reductions associated with transitioning to modern cooking fuels and also for estimating household cooking costs. Fuel and electricity prices from studies show that the cost of cooking with an EPC can be only 20% of the cost of cooking with charcoal, which highlights the potential for modern, energy-efficient electric cooking devices to defy the conventional wisdom of the energy ladder. [ABSTRACT FROM AUTHOR]

Vehicle-to-grid (V2G) systems play a key role in the integration of electric vehicles (EVs) into smart grids by enabling bidirectional energy flows between EVs and the grid. Optimizing V2G operations poses significant challenges due to the dynamic nature of energy demand, grid constraints, and user preferences. This paper addresses the optimization challenges in V2G systems and explores the use of artificial intelligence (AI) methods to tackle these challenges. The paper provides a comprehensive analysis of existing work on optimization in V2G systems and identifies gaps where AI-driven algorithms, machine learning, metaheuristic extensions, and agile optimization concepts can be applied. Case studies and examples demonstrate the efficacy of AI-driven algorithms in optimizing V2G operations, leading to improved grid stability, cost optimization, and user satisfaction. Furthermore, agile optimization concepts are introduced to enhance flexibility and responsiveness in V2G optimization. The paper concludes with a discussion on the challenges and future directions for integrating AI-driven methods into V2G systems, highlighting the potential for these intelligent algorithms and methods. [ABSTRACT FROM AUTHOR]

A stratospheric pseudolite (SP) is a pseudolite installed on a stratospheric airship. A stratospheric pseudolite network (SPN) is composed of multiple SPs, which shows promising potential in navigation applications because of its station-keeping capability, long service duration, and flexible deployment. Most traditional research about SPN geometry optimization has centered on geometric dilution of precision (GDOP). However, previous research rarely dealt with the topic of how SPN geometry configuration not only affects its GDOP, but also affects its energy balance. To obtain an optimal integrated performance, this paper employs the proportion of energy consumption in energy production as an indicator to assess SPN energy status and designs a composite indicator including GDOP and energy status to assess SPN geometry performance. Then, this paper proposes an SPN geometry optimization algorithm based on gray wolf optimization. Furthermore, this paper implements a series of simulations with an SPN composed of six SPs in a specific service area. Simulations show that the proposed algorithm can obtain SPN geometry solutions with good GDOP and energy balance performance. Also, simulations show that in the supposed scenarios and the specific area, a higher SP altitude can improve both GDOP and energy balance, while a lower SP latitude can improve SPN energy status. [ABSTRACT FROM AUTHOR]

In this paper, a joint optimization algorithm of offloading decision, energy harvesting time, and unmanned aerial vehicle (UAV) location is proposed for user equipment (UEs)'s task completion latency problem in a communication–sensing–computing integration scenario with wireless energy supply. Under the constraints of causality of energy harvesting consumption by the UEs and conditional mutual information, the total latency minimization problem of the UEs is established. Firstly, the optimization variables of the problem are transformed from three variables of offloading decision, energy harvesting time, and UAV location to two variables of offloading decision and UAV location by means of the derived closed expression, and then the transformed optimization problem is decomposed into the offloading decision optimization sub-problem and the UAV location optimization sub-problem to be solved alternately and iteratively. The genetic algorithm is employed to tackle the optimization sub-problem of offloading decisions, and the successive convex approximation algorithm is applied to the drone positioning optimization sub-problem. Simulation results show that the proposed algorithm in this paper reduces the average task completion latency by 35 percent and 15 percent, respectively, compared to the two baseline algorithms for different numbers of UEs. [ABSTRACT FROM AUTHOR]

The European Union, in pursuit of the goal of reducing emissions by at least 55% by 2030 and achieving climate neutrality by 2050, is deploying different actions, with industry decarbonization as a key strategy. However, increasing electricity demand requires an intensification of energy generation from clean technologies, and the energy system's expansion is hindered by renewable generation's climatic dependencies and the imperative for substantial electrical infrastructure investments. Although the transmission grid is expected to grow, flexibility mechanisms and innovative technologies need to be applied to avoid an overwhelming growth. In this context, this paper presents a thorough assessment, conducted within the FLEXINDUSTRIES project, of the flexibility potential across seven energy-intensive industries (automotive industry, biofuel production, polymer manufacturing, steel manufacturing, paper mills, pharmaceutical industry, and cement production). The methodology followed during the analysis entails reviewing the state-of-the-art existing flexibility mechanisms, industries' energy markets engagement, and technical/operational readiness. The results highlight the feasibility of the proposed actions for enabling energy market flexibility through demand-response programs, quantifying energy opportunities, and pinpointing regulatory and technical barriers. [ABSTRACT FROM AUTHOR]

Fluidic actuation systems are optimizable as to energy consumption by reducing the friction in the hydraulic cylinders. Polymeric materials with special antifriction properties and good resistance to hydraulic fluids can be deployed to enhance the performance of hydraulic cylinders. Small friction forces can also be ensured by facilitating the hydrodynamic separation of the elements of the friction tribosystem, namely the seal and sealed-off surface, respectively. The study presented in this paper analyzed the hydrodynamic separation phenomenon in hydraulic cylinders with coaxial sealing systems of the pistons. The process underlying the forming of the fluid film between the seal and its contact surface was considered and the formula for calculating film thickness was deduced. This paper presents graphs that describe the variation of the fluid film thickness versus the dimensional and material characteristics of the sealing systems. The study yielded recommendations as to the most adequate polymeric material to be used and the optimum dimensional characteristics of the seal. [ABSTRACT FROM AUTHOR]

This paper provides a detailed literature review of the environmental implications of vehicle platooning, a topic gaining significant attention in transportation. While previous reviews have focused on the safety, planning, fuel economy, and microsimulation aspects of platooning, this paper delves into environmental aspects. It identifies a lack of research adopting a holistic approach to transport and environmental benefits and emphasizes the need for further research to enhance vehicle efficiency and improve air quality and health conditions. This study traces the historical evolution of platooning, highlighting the shift in research focus over the decades. It advocates for more research on platooning's environmental aspects, particularly pollutant emissions and air quality. The primary contributions of this work are threefold and include the following: firstly, it delineates simulation methodologies for platooning and the associated pollutant emissions; secondly, it offers a critical assessment of the existing literature on vehicle emissions, fuel consumption, and energy savings; and thirdly, it illuminates the prospective research challenges within the specialized domain of vehicle platooning. [ABSTRACT FROM AUTHOR]

The three-dimensional (3D) path planning problem of an Unmanned Aerial Vehicle (UAV) considering the effect of environmental wind in a dense city is investigated in this paper. The mission of the UAV is to fly from its initial position to its destination while ensuring safe flight. The dense obstacle avoidance and the energy consumption in 3D space need to be considered during the mission, which are often ignored in common studies. To solve these problems, an improved Deep Reinforcement Learning (DRL) path planning algorithm based on Double Deep Q-Network (DDQN) is proposed in this paper. Among the algorithms, the random obstacle training method is first proposed to make the algorithm consider various flight scenarios more globally and comprehensively and improve the algorithm's robustness and adaptability. Then, the linear soft update strategy is employed to realize the smooth neural network parameter update, which enhances the stability and convergence of the training. In addition, the wind disturbances are integrated into the energy consumption model and reward function, which can effectively describe the wind disturbances during the UAV mission to achieve the minimum drag flight. To prevent the neural network from interfering with training failures, the meritocracy mechanism is proposed to enhance the algorithm's stability. The effectiveness and applicability of the proposed method are verified through simulation analysis and comparative studies. The UAV based on this algorithm has good autonomy and adaptability, which provides a new way to solve the UAV path planning problem in dense urban scenes. [ABSTRACT FROM AUTHOR]

The deployment of intelligent transportation is still in its early stages and there are many challenges that need to be addressed before it can be widely adopted. Autonomous vehicles are a class of intelligent transportation that is rapidly developing, and they are being deployed in selected cities. A combination of advanced sensors, machine learning algorithms, and artificial intelligence are being used in these vehicles to perceive their environment, navigate, and make the right decisions. These vehicles leverage extensive data sourced from various sensors and computers integrated into the vehicle. Hence, massive computational power is required to process the information from various built-in sensors in milliseconds to make the right decision. The power required by the sensors and the use of additional computational power increases the energy consumption, and, hence, could reduce the range of the autonomous electric vehicle relative to a standard electric car and lead to additional emissions. A number of review papers have highlighted the environmental benefits of autonomous vehicles, focusing on aspects like optimized driving, improved route selection, fewer stops, and platooning. However, these reviews often overlook the significant energy demands of the hardware systems—such as sensors, computers, and cameras—necessary for full autonomy, which can decrease the driving range of electric autonomous vehicles. Additionally, previous studies have not thoroughly examined the data processing requirements in these vehicles. This paper provides a more detailed review of the volume of data and energy usage by various sensors and computers integral to autonomous features in electric vehicles. It also discusses the effects of these factors on vehicle range and emissions. Furthermore, the paper explores advanced technologies currently being developed by various industries to enhance processing speeds and reduce energy consumption in autonomous vehicles. [ABSTRACT FROM AUTHOR]

With the rapid development of renewable energy and the increasing maturity of energy storage technology, microgrids are quickly becoming popular worldwide. The stochastic scheduling problem of microgrids can increase operational costs and resource wastage. In order to reduce operational costs and optimize resource utilization efficiency, the real-time scheduling of microgrids becomes particularly important. After collecting extensive data, reinforcement learning (RL) can provide good strategies. However, it cannot make quick and rational decisions in different environments. As a method with generalization ability, meta-learning can compensate for this deficiency. Therefore, this paper introduces a microgrid scheduling strategy based on RL and meta-learning. This method can quickly adapt to different environments with a small amount of training data, enabling rapid energy scheduling policy generation in the early stages of microgrid operation. This paper first establishes a microgrid model, including components such as energy storage, load, and distributed generation (DG). Then, we use a meta-reinforcement learning framework to train the initial scheduling strategy, considering the various operational constraints of the microgrid. The experimental results show that the MAML-based RL strategy has advantages in improving energy utilization and reducing operational costs in the early stages of microgrid operation. This research provides a new intelligent solution for microgrids' efficient, stable, and economical operation in their initial stages. [ABSTRACT FROM AUTHOR]

Featured Application: Hybrid microgrids for residential applications with connections to renewable energy sources, electric vehicle recharging stations and the AC energy grid. This editorial manuscript reviews the papers accepted for publication in the Special Issue "DC & Hybrid Microgrids" of Applied Sciences. This Special Issue, co-organized by the University of Pisa, Italy and Østfold University College in Norway, has collected nine papers from 25 submitted, with authors from Asia, North America and Europe. The published articles provide an overview of the most recent research advances in direct current (DC) and hybrid microgrids, exploiting the opportunities offered by the use of renewable energy sources, battery energy storage systems, power converters, innovative control and energy management strategies. [ABSTRACT FROM AUTHOR]

The widely recognised Energiewende, ("energy transition") in Germany has lost its original momentum. We therefore address the question of how the transition process to a new energy system can be reignited. To do so, we developed the "5Ds approach", which lays the groundwork for a process analysis and the identification of important catalysts and barriers. Focusing on the five major fields required for the energy transition, we analyse the effects of: (1) Decarbonisation: How can efficiency and renewable energies be expanded successfully? (2) Digitalisation: Which digital solutions facilitate this conversion and would be suitable as sustainable business models? (3) Decentralisation: How can potential decentralised energy and efficiency opportunities be developed? (4) Democratisation: How can participation be strengthened in order to foster acceptance (and prevent "yellow vest" protests, etc.)? (5) Diversification of service: Which services can make significant contributions in the context of flexible power generation, demand-side management, storage and grids? Our paper comes to the conclusion that German policy efforts in the "5D" fields have been implemented very differently. Particularly with regard to democratisation, the opportunities for genuine participation among the different social actors must be further strengthened to get the Energiewende back on track. New market models are needed to meet the challenges of the energy transition and to increase the performance of "5D" through economic incentives. [ABSTRACT FROM AUTHOR]

Artificial intelligence is changing and influencing our world. As one of the main algorithms in the field of artificial intelligence, convolutional neural networks (CNNs) have developed rapidly in recent years. Especially after the emergence of NASNet, CNNs have gradually pushed the idea of AutoML to the public's attention, and large numbers of new structures designed by automatic searches are appearing. These networks are usually based on reinforcement learning and evolutionary learning algorithms. However, sometimes, the blocks of these networks are complex, and there is no small model for simpler tasks. Therefore, this paper proposes POSS-CNN aiming at target recognition and detection, which employs a multi-branch CNN structure with PSNC and a method of automatic parallel selection for super parameters based on a multi-branch CNN structure. Moreover, POSS-CNN can be broken up. By choosing a single branch or the combination of two branches as the "benchmark", as well as the overall POSS-CNN, we can achieve seven models with different precision and operations. The test accuracy of POSS-CNN for a recognition task tested on a CIFAR10 dataset can reach 86.4%, which is equivalent to AlexNet and VggNet, but the operation and parameters of the whole model in this paper are 45.9% and 45.8% of AlexNet, and 29.5% and 29.4% of VggNet. The mAP of POSS-CNN for a detection task tested on the LSVH dataset is 45.8, inferior to the 62.3 of YOLOv3. However, compared with YOLOv3, the operation and parameters of the model in this paper are reduced by 57.4% and 15.6%, respectively. After being accelerated by WRA, POSS-CNN for a detection task tested on an LSVH dataset can achieve 27 fps, and the energy efficiency is 0.42 J/f, which is 5 times and 96.6 times better than GPU 2080Ti in performance and energy efficiency, respectively. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) offers unique capabilities in terms of design freedom and customization, contributing to sustainable manufacturing. However, energy efficiency remains a challenge in the widespread adoption of AM processes. In this paper, we present a comprehensive review of the current research on energy efficiency in AM, addressing challenges, opportunities, and future directions. Our analysis reveals a lack of standardization in the measurement and reporting of energy consumption, making it difficult to evaluate and compare the energy performance of various systems. We propose a holistic framework to address energy efficiency throughout the entire life cycle of the AM process, highlighting the importance of design optimization, material selection, advanced control systems, and energy management strategies. The paper also emphasizes the need for further research on the interactions between process parameters, along with the potential of integrating renewable energy sources into AM systems. This review offers valuable insights for both academics and industry professionals, calling for standardized methodologies and a focus on energy management to optimize energy efficiency in AM processes, ultimately enhancing competitiveness and sustainability in modern manufacturing. [ABSTRACT FROM AUTHOR]

A cut-to-length (CTL) forest harvester is a purpose-built, hydraulically actuated mobile work machine used for felling, delimbing, and cross-cutting trees into dimensions and assortments. In such a machine, the diesel engine load is known to fluctuate greatly over the work cycle. To manage these changing power demands, a hydraulic hybrid system is implemented into a full-scale proof-of-concept machine to discover its functionality and to collect experimental results in real operating conditions. The hydraulic hybrid system installed on a CTL harvester machine was tuned to enable the collection of two actual datasets of timber harvesting, and data collection over a period of production use was carried out. In addition to updating the state-of-the-art research into heavy non-road mobile machinery regarding hybrid systems, this paper discusses the two tests carried out in actual production conditions with the studied hydraulic hybrid system. The adaptations and modifications to the studied and tested system since earlier papers are discussed—especially the improvements in the system dynamics and response as well as the control of the hybrid system. In conclusion, the tested system can be said to operate satisfactorily and shows clear advantages over the conventional system, even though it still has some limitations. The results show that the system has the potential to increase the productivity of the machine through the demonstrated higher peak power, as well as showing improvement in fuel efficiency under highly fluctuating loads, especially with heavy or large-volume tree stems. [ABSTRACT FROM AUTHOR]

This paper introduces a groundbreaking approach to demand response management, aiming to empower consumers through innovative strategies. The key contribution is the concept of "acquiring flexibility rights", wherein consumers engage with power aggregators to curtail energy usage during peak-load periods, receiving incentives in return. A flexibility right coefficient is introduced, allowing consumers to tailor their participation in demand response programs, ensuring their well-being. Additionally, a lighting intensity control system is developed to enhance residential lighting network efficiency. The study demonstrates that high-energy consumers, adopting a satisfaction factor of 10, can achieve over 61% in electricity cost savings by combining the lighting control system and active participation in demand response programs. This not only reduces expenses but also generates income through the sale of flexibility rights. Conversely, low-energy consumers can fully offset their expenses and accumulate over USD 33 in earnings through the installation of solar panels. This paper formulates an optimization problem considering flexibility rights, lighting control, and time-of-use tariff rates. An algorithm is proposed for a distributed solution, and a sensitivity analysis is conducted for evaluation. The proposed method showcases significant benefits, including cost savings and income generation for consumers, while contributing to grid stability and reduced blackout occurrences. Real data from a residential district in Tehran validates the method's effectiveness. This study concludes that this approach holds promise for demand response management in smart grids, emphasizing the importance of consumer empowerment and sustainable energy practices. [ABSTRACT FROM AUTHOR]

Solar energy is not only the most abundant energy on earth but it is also renewable. The use of this energy is expanding very rapidly mainly through photovoltaic technology. However, electricity storage remains a bottleneck in tackling solar resource variability. Thus, solar thermal energy becomes of particular interest when energy storage is required, as thermal energy storage is much cheaper than electricity storage. The objective of this paper is to make a short update on the CSP (Concentrated Solar Power) market as of the year 2023. It is based on the CSP-GURU database, which lists information on CSP power plants all over the world. Although this database is open, it is not easy to find UpToDate analysis. An overview of this expanding technology is presented and offers readable figures with the most important information. This includes the evolution of installed capacities worldwide along with upcoming projects (under construction) and technological trends. The evolution of storage capacities and operating temperatures is discussed. Investment costs and levelized cost of electricity are also provided to obtain reliable data for comparison with other energy technologies. Specific land requirements are highlighted, along with overall efficiency. Relevant examples are discussed in this paper. Eventually, it outlines the evolution of the CSP landscape with useful information for scientific and educational purposes. [ABSTRACT FROM AUTHOR]

In order to cope with the problems of energy shortage and environmental pollution, carbon emissions need to be reduced and so the structure of the power grid is constantly being optimized. Traditional centralized power networks are not as capable of controlling and distributing non-renewable energy as distributed power grids. Therefore, the optimal dispatch of microgrids faces increasing challenges. This paper proposes a multi-strategy fusion slime mould algorithm (MFSMA) to tackle the microgrid optimal dispatching problem. Traditional swarm intelligence algorithms suffer from slow convergence, low efficiency, and the risk of falling into local optima. The MFSMA employs reverse learning to enlarge the search space and avoid local optima to overcome these challenges. Furthermore, adaptive parameters ensure a thorough search during the algorithm iterations. The focus is on exploring the solution space in the early stages of the algorithm, while convergence is accelerated during the later stages to ensure efficiency and accuracy. The salp swarm algorithm's search mode is also incorporated to expedite convergence. MFSMA and other algorithms are compared on the benchmark functions, and the test showed that the effect of MFSMA is better. Simulation results demonstrate the superior performance of the MFSMA for function optimization, particularly in solving the 24 h microgrid optimal scheduling problem. This problem considers multiple energy sources such as wind turbines, photovoltaics, and energy storage. A microgrid model based on the MFSMA is established in this paper. Simulation of the proposed algorithm reveals its ability to enhance energy utilization efficiency, reduce total network costs, and minimize environmental pollution. The contributions of this paper are as follows: (1) A comprehensive microgrid dispatch model is proposed. (2) Environmental costs, operation and maintenance costs are taken into consideration. (3) Two modes of grid-tied operation and island operation are considered. (4) This paper uses a multi-strategy optimized slime mould algorithm to optimize scheduling, and the algorithm has excellent results. [ABSTRACT FROM AUTHOR]

This paper focuses on optimizing the Zuker RNA folding algorithm, a bioinformatics task with non-serial polyadic dynamic programming and non-uniform loop dependencies. The intricate dependence pattern is represented using affine formulas, enabling the automatic application of tiling strategies via the polyhedral method. Three source-to-source compilers—PLUTO, TRACO, and DAPT—are employed, utilizing techniques such as affine transformations, the transitive closure of dependence relation graphs, and space–time tiling to generate cache-efficient codes, respectively. A dedicated transpose code technique for non-serial polyadic dynamic programming codes is also examined. The study evaluates the performance of these optimized codes for speed-up and scalability on multi-core machines and explores energy efficiency using RAPL. The paper provides insights into related approaches and outlines future research directions within the context of bioinformatics algorithm optimization. [ABSTRACT FROM AUTHOR]

The Qinghai–Tibet plateau, with an average altitude of over 4000 m, has low annual average temperatures and a high demand for building heating. This region's abundant solar energy resources hold substantial practical significance for improving the indoor heat environment and reducing building energy consumption. This paper investigates the impact of orientation and skylight area ratio on building heat load and indoor temperature, using both actual measurement and simulation methods, with a case study of the comprehensive building at Beiluhe Observation and Research Station of Frozen Soil Engineering and Environment (Beiluhe Station), located in the Qinghai–Tibet Plateau region. Initially, a model was established using the EnergyPlus 9.4 software, with orientation variables set from east to west in 15° increments, to simulate the variations in building heat load resulting from orientation changes; simulations were then conducted for three different skylight area ratios under the optimal orientation to evaluate their influence on heat load and indoor temperature. The results show that for the architectural style examined in this paper, the optimal building orientation within the region is 30° south by east, with the optimal orientation range spanning from 45° south by east to due south. Heating load is negatively correlated with the skylight area ratio, and beyond a certain threshold, the rate of decrease in heat load diminishes or even stabilizes. The conclusions of this paper offer guidance for the orientation and skylight design of new buildings on the Qinghai–Tibet Plateau. [ABSTRACT FROM AUTHOR]

In response to the optimal operation of ocean container ships, this paper presents a two-level planning model that takes into account carbon tax policies. This model translates the CO2 emissions of ships into carbon tax costs and aims to minimize the overall operation costs of the ships. In top-level planning, the model considers factors such as speed, cargo load, and energy consumption to establish an objective function and optimization strategy. In bottom-level planning, the model involves ship stability and imposes corresponding constraints. By integrating the two levels of planning, a ship operation optimization model that considers multiple factors is obtained. With practical ocean container ships as cases, through numerical examples and sensitivity analysis, the constraint, stability, and structural feasibility of the constructed model are confirmed. The research results of this paper provide a decision-making basis for optimizing the operation of oceanic container ships. [ABSTRACT FROM AUTHOR]