Search

This review explores circular economy principles in regard to ethanol production from paper-mill sludge. Environmental sustainability and renewability over fossil fuels make second generation ethanol an attractive energy source in a rapidly growing population and consumption world. Paper sludge (PS), a by-product of the pulp and paper (P&P) industry, can no longer be recycled for paper production and is mainly disposed of in landfills. Therefore, it poses a major environmental challenge. However, it has shown potential as a valuable raw material for ethanol production, along with other pulp and paper products, due to its abundant availability and high cellulosic content. This waste-to-energy (WtE) technology for ethanol production is proposed as an alternative, aligning with circular economy concepts to maximize resource efficiency and minimize waste. This review underlines the circular economy aspects of bioethanol production within paper mill sludge management systems. Circular economy principles applied to ethanol production from PS offer a promising avenue for sustainable biofuel development that not only addresses waste management challenges but also enhances the overall environmental performance of biofuel production. Furthermore, economic benefits are described, highlighting the potential for job creation and community development. [ABSTRACT FROM AUTHOR]

Though paper is an environmentally friendly alternative to plastic as a packaging material, it lacks antibacterial properties, and some papers have a low resistance to oil or water. In this study, a multifunctional paper-coating material was developed to reduce the use of plastic packaging and enhance paper performance. Natural cellulose nanocrystals (CNCs) with excellent properties were used as the base material for the coating. The CNCs were functionalized into dialdehyde CNCs (DACNCs) through periodate oxidation. The DACNCs were subsequently complexed using erythrosine as a photosensitizer to form an erythrosine–CNC composite (Ery-DACNCs) with photodynamic inactivation. The Ery-DACNCs achieved inactivations above 90% after 30 min of green light irradiation and above 85% after 60 min of white light irradiation (to simulate real-world lighting conditions), indicating photodynamic inactivation effects. The optimal parameters for a layer-by-layer dip coating of kraft paper with Ery-DACNCs were 4.5-wt% Ery-DACNCs and 15 coating layers. Compared to non-coated kraft paper and polyethylene-coated paper, the Ery-DACNC-coated paper exhibited enhanced mechanical properties (an increase of 28% in bursting strength). More than 90% of the bacteria were inactivated after 40 min of green light irradiation, and more than 80% were inactivated after 60 min of white light irradiation. [ABSTRACT FROM AUTHOR]

AbstractThis study seeks to profile the shoppers’ propensity to reuse shopping bags and the type of shopping bags they reuse on the basis of demographics. The study used an observation method to record the consumers’ shopping habits and a short questionnaire to record the participants’ demographics. A binary regression analysis and a multinomial regression analysis were used to analyse data. The results indicated that the mature aged, women, and low income shoppers were more likely to practice reuse of plastic shopping bags than their respective counterparts. There were no statistically significant differences in the likelihood of young aged shoppers compared to mature aged shoppers and low income shoppers compared to high income shoppers using cotton bags than plastic bags. There were also no statistically significant differences in the likelihood of young aged shoppers compared to mature aged shoppers and male shoppers compared to female shoppers using paper bags than plastic bags. However, the results indicated a statically significant result in how males compared to females differed in their using of cotton bags than plastic bags and a statistically significant result in how low income shoppers compared to high income shoppers differed in their use of paper bags than plastic bags.

To ensure development sustainability, the linear economic approach is being transformed into a cyclical model. For the pulp and paper industry (PPI), which occupies a significant place in the Russian economy, the shift of circular principles to the field of bioeconomics is becoming more important. This requires the development of basic biotechnological approaches implemented in closed cycles (biorefining). The aim of this study was to develop the biotechnological foundations of the circular economic system of the pulp and paper industry. To achieve the goal, the factors for the implementation of the circular mechanism in the pulp and paper industry were established. The composition of pulp and paper waste was systematized, taking into account the places of their occurrence; the directions and forms of the biorefining of pulp and paper secondary renewable resources were determined; and the principal possibility of obtaining bioethanol, based on the whole complex of sugars from cellulose production wastes, is shown. A wide range of general scientific methods was involved (analysis, synthesis, classification, modeling, etc.). Statistical methods were used to process experimental results in the field of pulp and paper waste bioconversion. The biotechnologies involved included methods of destruction, detoxification, and conversion of useful resources into secondary raw materials and final products. From the standpoint of the environmental approach, there are serious efficiency imbalances in the pulp and paper industry, which justify the implementation of circular mechanisms for organizing economic systems. The overall efficiency is ensured by the use of renewable resources and obtaining environmental effects. Algorithms and parameters of green biotechnological regulations for pulp and paper industry waste recycling provide the possibility of microbiological production of a complex of products: biocomposites, bioplastics, medical products, fertilizers, feed additives, vitamin supplements, and bioenergy resources. A strategy for the efficient biochemical processing of pulp and paper waste into green ethanol was determined. The possibility of increasing the efficiency of alcoholic fermentation using various biocatalysts was experimentally confirmed. The technological features of this method, associated with the need for microaerobic fermentation modes, were determined. [ABSTRACT FROM AUTHOR]

Fossil-plastics or paper? Or for that matter, bio-plastics and paper? This is a well-entrenched question in academic research, industrial, social and policy-making circles. As environmental life-cycle analyses (or more appropriately, sustainability analyses) show time and again, no single product or process or mode of operation is a ‘total villain’. There are goods and bads, and at times, more of the one than the other. This paper, which is based on a course-report written by the first author at Karlstad University (Sweden), restricts itself to a review of publications which have opted to compare paper bags with low density polyethylene (LDPE) plastic bags, on the basis of their environmental impacts. Environmental impact categories include the global warming potential, energy demand, fossil fuel depletion, water usage, acidification, eutrophication, and a range of toxicities – human, terrestrial, freshwater-aquatic and marine-aquatic. The articles were obtained through Google Scholar, read and reviewed to glean the results presented therein. The ‘What’, ‘How’ and ‘Where’, so to say were studied carefully to understand the reasons behind any differences or similarities detected. On the basis of this focused review, even though no new knowledge is being added, the common belief that the paper bag is environmentally superior to the LDPE alternative is further consolidated. However, if one focuses on water usage and would assign a high weightage to that environmental impact, LDPE perhaps may score a few ‘brownie points’ over paper. One must also not forget that plastics (LDPE in this instance) can be recycled without significant deterioration in its functional properties. In a circular economy (the bioeconomy part of which gradually will expand over time), while introducing more and more bio-based products into the technosphere by way of trans-materialization is recommended, plastics will still continue to exist – albeit in much smaller amounts – and it would be perfectly fine if the degree of recycling is augmented significantly. Speaking of a holistic sustainability analysis, the socio-economic aspects of a choice between LDPE and paper bags must also be factored in, and studied. Much-desired change happens when the top-down meets the bottom-up somewhere midway.

Copyright of Studia Ecologiae et Bioethicae is the property of Uniwerystet Kardynala Stefana Wyznskiege w Warzawie and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This review explores circular economy principles in regard to ethanol production from paper-mill sludge. Environmental sustainability and renewability over fossil fuels make second generation ethanol an attractive energy source in a rapidly growing population and consumption world. Paper sludge (PS), a by-product of the pulp and paper (P&P) industry, can no longer be recycled for paper production and is mainly disposed of in landfills. Therefore, it poses a major environmental challenge. However, it has shown potential as a valuable raw material for ethanol production, along with other pulp and paper products, due to its abundant availability and high cellulosic content. This waste-to-energy (WtE) technology for ethanol production is proposed as an alternative, aligning with circular economy concepts to maximize resource efficiency and minimize waste. This review underlines the circular economy aspects of bioethanol production within paper mill sludge management systems. Circular economy principles applied to ethanol production from PS offer a promising avenue for sustainable biofuel development that not only addresses waste management challenges but also enhances the overall environmental performance of biofuel production. Furthermore, economic benefits are described, highlighting the potential for job creation and community development.

To ensure development sustainability, the linear economic approach is being transformed into a cyclical model. For the pulp and paper industry (PPI), which occupies a significant place in the Russian economy, the shift of circular principles to the field of bioeconomics is becoming more important. This requires the development of basic biotechnological approaches implemented in closed cycles (biorefining). The aim of this study was to develop the biotechnological foundations of the circular economic system of the pulp and paper industry. To achieve the goal, the factors for the implementation of the circular mechanism in the pulp and paper industry were established. The composition of pulp and paper waste was systematized, taking into account the places of their occurrence; the directions and forms of the biorefining of pulp and paper secondary renewable resources were determined; and the principal possibility of obtaining bioethanol, based on the whole complex of sugars from cellulose production wastes, is shown. A wide range of general scientific methods was involved (analysis, synthesis, classification, modeling, etc.). Statistical methods were used to process experimental results in the field of pulp and paper waste bioconversion. The biotechnologies involved included methods of destruction, detoxification, and conversion of useful resources into secondary raw materials and final products. From the standpoint of the environmental approach, there are serious efficiency imbalances in the pulp and paper industry, which justify the implementation of circular mechanisms for organizing economic systems. The overall efficiency is ensured by the use of renewable resources and obtaining environmental effects. Algorithms and parameters of green biotechnological regulations for pulp and paper industry waste recycling provide the possibility of microbiological production of a complex of products: biocomposites, bioplastics, medical products, fertilizers, feed additives, vitamin supplements, and bioenergy resources. A strategy for the efficient biochemical processing of pulp and paper waste into green ethanol was determined. The possibility of increasing the efficiency of alcoholic fermentation using various biocatalysts was experimentally confirmed. The technological features of this method, associated with the need for microaerobic fermentation modes, were determined.

The valorization of wastes as an alternative or secondary raw material in various products and processes has been a solution for the implementation of sustainability, a safer environment, and the concept of circular economy in the efficient use and management of natural resources. To promote sustainability through a circular economy approach, this work tries to demonstrate the environmental gains that are obtained by bringing together, in an industrial symbiosis action, two large industrial sectors (the pulp and paper and the road pavement sectors) responsible for generating large amounts of wastes. A sustainability assessment, based on a life cycle and circular economy approach, is presented here, and discussed using a simple case study carried out on a real scale. Two wastes (dregs and grits) from the pulp and paper industry (PPI) were used to partially replace natural fine aggregates in the production of bituminous mixtures used on the top surface of road pavements. The impacts at a technical, environmental, economic, and social level were assessed and it was shown that this simple waste valorization action is not only positive for the final product from a technical point of view, but also for the environment, causing positive impacts on the different sustainability dimensions that were evaluated. [ABSTRACT FROM AUTHOR]

This study seeks to profile the shoppers' propensity to reuse shopping bags and the type of shopping bags they reuse on the basis of demographics. The study used an observation method to record the consumers' shopping habits and a short questionnaire to record the participants' demographics. A binary regression analysis and a multinomial regression analysis were used to analyse data. The results indicated that the mature aged, women, and low income shoppers were more likely to practice reuse of plastic shopping bags than their respective counterparts. There were no statistically significant differences in the likelihood of young aged shoppers compared to mature aged shoppers and low income shoppers compared to high income shoppers using cotton bags than plastic bags. There were also no statistically significant differences in the likelihood of young aged shoppers compared to mature aged shoppers and male shoppers compared to female shoppers using paper bags than plastic bags. However, the results indicated a statically significant result in how males compared to females differed in their using of cotton bags than plastic bags and a statistically significant result in how low income shoppers compared to high income shoppers differed in their use of paper bags than plastic bags. [ABSTRACT FROM AUTHOR]

In order to explore the methods of recycling waste paper, reduce environment pollution, and develop a circular economy, the application of waste corrugated paper to the strengthening of polylactic acid (PLA) was studied. Plant fiber from waste corrugated paper (WCPF) was used to prepare WCPF/PLA composite via co-extrusion. The WCPF was extracted from the waste corrugated paper by beating in a Valli beating machine and grinding in a disc grinder. KH-550 coupling agent was used to modify the surface of WCPF to improve the interface adhesive strength between the WCPF and PLA matrix. The effects of the contents of WCPF and KH-550 coupling agent on the mechanical properties, microstructure, crystallization properties, and thermostability of the WCPF/PLA composite were studied. The results show that the WCPF can be well separated from each other. The WCPF can be uniformly dispersed in the PLA matrix through a co-extrusion process. WCPF can increase the mechanical strength and deformation resistance ability of WCPF/PLA composite, and KH-550 coupling agent can further improve that of the WCPF/PLA composite. This study is of obvious significance to the recycling of waste paper and the development of a circular economy. [ABSTRACT FROM AUTHOR]

Though paper is an environmentally friendly alternative to plastic as a packaging material, it lacks antibacterial properties, and some papers have a low resistance to oil or water. In this study, a multifunctional paper-coating material was developed to reduce the use of plastic packaging and enhance paper performance. Natural cellulose nanocrystals (CNCs) with excellent properties were used as the base material for the coating. The CNCs were functionalized into dialdehyde CNCs (DACNCs) through periodate oxidation. The DACNCs were subsequently complexed using erythrosine as a photosensitizer to form an erythrosine–CNC composite (Ery-DACNCs) with photodynamic inactivation. The Ery-DACNCs achieved inactivations above 90% after 30 min of green light irradiation and above 85% after 60 min of white light irradiation (to simulate real-world lighting conditions), indicating photodynamic inactivation effects. The optimal parameters for a layer-by-layer dip coating of kraft paper with Ery-DACNCs were 4.5-wt% Ery-DACNCs and 15 coating layers. Compared to non-coated kraft paper and polyethylene-coated paper, the Ery-DACNC-coated paper exhibited enhanced mechanical properties (an increase of 28% in bursting strength). More than 90% of the bacteria were inactivated after 40 min of green light irradiation, and more than 80% were inactivated after 60 min of white light irradiation.

Thin film transistors on paper are increasingly in demand for emerging applications, such as flexible displays and sensors for wearable and disposable devices, making paper a promising substrate for green electronics and the circular economy. ZnO self-assembled thin film transistors on a paper substrate, also using paper as a gate dielectric, were fabricated by pulsed electron beam deposition (PED) at room temperature. These self-assembled ZnO thin film transistor source–channel–drain structures were obtained in a single deposition process using 200 and 300 µm metal wires as obstacles in the path of the ablation plasma. These transistors exhibited a memory effect, with two distinct states, "on" and "off", and with a field-effect mobility of about 25 cm2/Vs in both states. For the "on" state, a threshold voltage (Vth on = −1.75 V) and subthreshold swing (S = 1.1 V/decade) were determined, while, in the "off" state, Vth off = +1.8 V and S = 1.34 V/decade were obtained. A 1.6 μA maximum drain current was obtained in the "off" state, and 11.5 μA was obtained in the "on" state of the transistor. Due to ZnO's non-toxicity, such self-assembled transistors are promising as components for flexible, disposable smart labels and other various green paper-based electronics. [ABSTRACT FROM AUTHOR]

Recent decades have witnessed increasing interest in the concept of the circular economy within both the business world and political circles. The circular economy spans the entire life cycle of products from product design through production, marketing, and consumption, to waste management, recycling, and re-use, and enthusiasm for putting the concept into practice has been identified across different sectors of the economy. This exploratory case study reviews how some of the leading companies in the paper and retail industries, have publicly addressed the circular economy. The case study outlines the nature of the circular economy, provides a cameo literature review of published work on the circular economy, describes the approach adopted for the case study, reports the findings of the review of how the leading companies in the paper and retail industries have addressed the circular economy, and discusses some wider issues.

To improve the recycle value of waste paper and promote circular economic development, waste corrugated paper fiber (WCPF) was used as a reinforcing agent to prepare waste corrugated paper fiber/polylactic acid (WCPF/PLA) composites via dichloromethane solvent which can be reused. The WCPF in the waste corrugated paper is extracted by beating in a Valli beating machine for different time lengths and grinding in a disc grinder. The effects of beating time and the content of WCPF on the microstructure, mechanical properties, thermal decomposition process, and crystallization properties of the WCPF/PLA composite were studied. The result shows that the WCPF can be well separated from each other and can be evenly dispersed in the PLA matrix. When 25 wt% WCPF which was beat for 30 min was used, the composite has the greatest improvement in tensile property. This study provides a new process for the recycling of waste paper in the application of polymer reinforcement. The research on waste paper fiber and degradable polymer composite is of great significance for reducing environmental pollutants and developing circular economy. [ABSTRACT FROM AUTHOR]

The pulp and paper industry (PPI) is a major contributor to the global economy, but it also poses a challenge for waste disposal, as it generates large amounts of several waste streams. Among these, paper rejects are generated during the papermaking process and could account for up to 25% of the produced paper. Moreover, hundreds of millions of tons of paper are produced annually that end up in landfills if not burnt or recycled. Furthermore, the PPI significantly contributes to climate change and global warming in the form of deforestation and water and air pollution. Therefore, the impact of this industry on the sustainability of natural resources and its adverse environmental health effects requires special attention. This review focuses on discussing the sustainable routes to utilize paper waste and rejects from the PPI towards a circular economy. At first, it discusses the industry itself and its environmental impact, followed by the possible sustainable approaches that can be implemented to improve papermaking processes as well as waste management systems, including paper recycling. The literature indicates that paper recycling is crucial because, if appropriately designed, it significantly lowers greenhouse gas emissions, water and resources consumption, and manufacturing costs. However, several concerns have surfaced about the different chemicals that are used to improve recycling efficiency and recycled paper quality. Furthermore, paper recycling is limited to up to seven times. This review, therefore, goes on to highlight several sustainable waste management routes for paper waste utilization other than recycling by emphasizing the concept of converting paper waste and rejects into energy and high-value materials, including biofuels, biohydrogen, biomethane, heat, nanocellulose, hydrochar, construction materials, and soil amendments. Both the benefits and shortcomings of these waste management routes and their applications are discussed. It becomes clear from this review that sustainable management solutions for paper waste and rejects are implementable, but further research and development are still needed. [ABSTRACT FROM AUTHOR]

In the past decades, the German paper industry has been increasing the sustainability of paper production by continuously using more recovered paper. Today, recovered paper is an essential secondary raw material to produce new paper. Nevertheless, around 20 % of the paper produced in Germany is still not returned to the recovered paper stream and instead is mostly thermally used. To further increase the use of fibers from recovered paper as secondary raw material and thus, to reduce primary energy consumption and greenhouse gas emissions, new approaches to recycle recovered paper from mixed waste streams are needed. In the research project "Energy savings in paper production by opening up the value chains of recovered paper from lightweight packaging, residual waste and commercial waste" (EnEWA), a treatment process is developed to recover and recycle recovered paper from the mentioned waste streams. The advanced mechanical process to be newly developed consists of dry-mechanical sorting, the manufacturing of economically usable secondary raw materials (defibration), their wet-mechanical dissolution, separation and hygienization and finally their reuse in paper production. This enables the exploitation of new waste streams in material recycling and thus contributes to reduced energy consumption as well as CO2 emissions within the circular economy. Initial material characterization analyses show that on the one hand the quality of the paper discarded in mixed waste streams is sufficient to be used as secondary raw material and that on the other hand up to 50 % of the paper discarded could have been disposed of within the separate paper collection. The results are incorporated in the development of a sorting process for pre-concentrates, which serves as input material for the treatment process to recover paper fibers. In further steps, the results generated will be integrated, for instance, into the future development of the minimum standard for packaging recycling. [ABSTRACT FROM AUTHOR]

A growing research interest currently exists in the use of paper as a building material. This work aims to present the results of a measurement campaign developed on innovative waste paper-based building components. The research was carried out in Southern Italy and used some local by-product aggregates. Three different mixture designs were developed in the laboratory by adding three kinds of biomass to a pulp paper blend: fava bean residues (FB), sawdust powder (SP) and coffee grains (CG) extracted from exhausted chaffs. A physical characterization was carried out measuring the bulk density and bulk porosity. Scanning Electron Microscopy (SEM) analysis of the single aggregates was followed by a microstructure analysis of the final components. Bulk density evaluation showed a range between 200 and 348 kg·m−3. Furthermore, thermal performances were measured; the thermal conductivity of the experimented samples ranged from 0.071 to 0.093 W·m−1·K−1, thus it is possible to classify the tested materials as thermal insulators. Moreover, the acoustic properties were evaluated and tested. The normal incidence sound absorption coefficient was measured by the impedance tube on cylindrical specimens. In general, a different behavior was observed between the upper and lower base of each specimen due to the manufacturing process and the shrinkage caused by the different interactions occurring between the aggregates and the pulp paper waste; for example, the presence of sawdust reduced shrinkage in the final specimens, with consequent smaller physical variations among the two faces. The correlation existing between the manufacturing process and the microstructural properties was also investigated by the estimation of the non-acoustical parameters using the inverse method and taking into account the JCA (Johnson, Champoux and Allard) model as a reference.

This work reports on the development and performance evaluation of newly developed paper sheets coated, on both sides, with thin films of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) for applications of food packaging. For this, PHBV/paper/PHBV multilayers were first prepared by the thermo-sealing technique, optimizing the process variables of temperature and time. Thereafter, the multilayer sheets were characterized in terms of their morphological, optical, thermal, mechanical, and barrier properties and compared with equivalent paper structures double coated with high-barrier multilayer films of petrochemical polymers. The results indicated that the double coatings of PHBV successfully improved the mechanical resistance and ductility, protected from moisture, and also reduced the aroma and oxygen permeances of paper, having a minimal effect on its optical and thermal properties. Finally, the compostability of the resultant multilayer sheets was analyzed, confirming that the presence of the PHBV coatings slightly delayed the aerobic biodegradation and disintegration of paper.

A growing research interest currently exists in the use of paper as a building material. This work aims to present the results of a measurement campaign developed on innovative waste paper-based building components. The research was carried out in Southern Italy and used some local by-product aggregates. Three different mixture designs were developed in the laboratory by adding three kinds of biomass to a pulp paper blend: fava bean residues (FB), sawdust powder (SP) and coffee grains (CG) extracted from exhausted chaffs. A physical characterization was carried out measuring the bulk density and bulk porosity. Scanning Electron Microscopy (SEM) analysis of the single aggregates was followed by a microstructure analysis of the final components. Bulk density evaluation showed a range between 200 and 348 kg·m−3. Furthermore, thermal performances were measured; the thermal conductivity of the experimented samples ranged from 0.071 to 0.093 W·m−1·K−1, thus it is possible to classify the tested materials as thermal insulators. Moreover, the acoustic properties were evaluated and tested. The normal incidence sound absorption coefficient was measured by the impedance tube on cylindrical specimens. In general, a different behavior was observed between the upper and lower base of each specimen due to the manufacturing process and the shrinkage caused by the different interactions occurring between the aggregates and the pulp paper waste; for example, the presence of sawdust reduced shrinkage in the final specimens, with consequent smaller physical variations among the two faces. The correlation existing between the manufacturing process and the microstructural properties was also investigated by the estimation of the non-acoustical parameters using the inverse method and taking into account the JCA (Johnson, Champoux and Allard) model as a reference. [ABSTRACT FROM AUTHOR]

The circular economy is considered by international institutions such as the United Nations and the European Union as the most urgent strategy to orient the economic development model towards sustainability. To find concrete applications, the circular economy requires greater awareness in consumers and businesses. The Italian paper industry, which boasts high levels of competitiveness at an international level, has initiated important restructuring and rationalization processes over the last decade with a view to recycling and sustainability. Only the final phase of the production process is yet to comply with all circular economy criteria, that is, the recovery of production waste (pulper). Hence, the actual technological and strategic challenge of the paper industry is to phase out landfilling of recyclable waste and implement energy recovery strategies, as well as promoting the use of renewable sources.

Even though the recycling of paper and paperboard is quite successful when compared to the recycling of other resources, there are many things to improve. Recovering the used paper and paperboard without contamination and sending it back to the papermill that produced it would enhance the recycling potential and efficiency of recovered fiber resources. Close collaboration between a paper and packaging company and a logistics company has made a big improvement in recycling and achieved the circular economy of fiber resources. It is time to find better ways to collaborate, thereby improving our capability to keep our planet green. [ABSTRACT FROM AUTHOR]

High-performance aramid papers are ideal insulating materials in the electric industry, due to their superior mechanical strength and insulation capabilities. However, when subjected to prolonged high-voltage and high-power operations, these papers are prone to electrical damage, such as breakdown or corona aging. Unfortunately, most damaged aramid papers are viewed as mere waste, discarded through landfill or other unsustainable disposal methods. It is not only contrary to circular economy principles but also poses a significant environmental threat due to the potential for pollution. Herein, a closed-loop recycling strategy is proposed that efficiently and effectively reclaims electrically damaged meta-aramid papers. Using the DMAc/LiCl deprotonation system, waste aramid papers are completely decomposed into molecular chains, exposing carbon residues resulting from electrical breakdown. These carbon residues are removed through a step-by-step purification process. A reprotonation treatment is then applied to regenerate new meta-aramid papers by reforming the intermolecular hydrogen bonds. This approach not only fully restores the original honeycomb-like structure but also ensures the crystallization and hydrogen bond content, maintaining both electrical and mechanical properties at above 90 % of their original values. Notably, our recycling method is also compatible with aramid-based composites, achieving exceptional recycling efficiency. [Display omitted] • Electrically damaged meta-aramid paper can be recycled in a closed loop. • The DMAc/LiCl system completely dissolves waste aramid into PMIA molecular chains. • Carbon residues induced by electrical breakdown can be removed by purification. • The synergistic conservation of electrical and mechanical properties exceeds 90 %. • Closed loop recycling strategy is also viable for inorganic-aramid composite paper. [ABSTRACT FROM AUTHOR]

Recycling is emerging as both a viable alternative to extraction in many industries and a cornerstone of the circular economy. In this paper, we assess the role of paper and cardboard recycling on the forest sector, from both an economic and carbon perspective. For this purpose, we add the recycling industry to an existing forest-sector model in an attempt to capture its effects on other wood products and the overall forest resource. As the forest sector has an important potential for climate change mitigation, this model allows us to assess the effects of increased paper and cardboard recycling on the availability of the natural resource and the carbon balance of the forest sector. We show that these results are strongly linked to the hypotheses of substitutability and/or complementarity of recycled pulp and virgin pulpwood. Although we find increased emissions at the pulp sector level, the effects on emissions in other wood products are small. When pulp products are considered substitutes, we find the impact on total net sequestration to be positive. In the case where pulp products are considered complements, we find the impact on total net sequestration to be negative. [ABSTRACT FROM AUTHOR]

In Nazi Germany (1933–45), reclaiming waste became an intrinsic component of the regime's economy as well as its ideological, racial, and expansionist ambitions. National Socialist interventions into waste streams began in 1934 with salvage campaigns. The state then brought urban waste policies and municipal waste services under its control, restructuring and 'Aryanising' the waste salvage trade. Moreover, both consumers and producers were prompted to collect and reprocess waste. Over time, the gradual expansion of the Nazi waste recovery policies and campaigns – here referred to as the 'Nazi waste exploitation regime' – brought forth a determined vision of a circular economy in which no waste whatsoever should escape its reclamation for the national community or Volksgemeinschaft. This article sketches the actors, structures, and objectives of this waste exploitation regime for the case of rags and paper and uncovers its entanglement with Nazi racist and genocidal ideology and expansionism. [ABSTRACT FROM AUTHOR]

To encourage proper waste management for electrical and electronic devices (e-waste), it is necessary to invest heavily in the development of recycling technologies. One way to improve the process is to automate separating the shredded parts of e-waste using a robot. This paper's literature review, utilizing the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) framework, showcases potential robotic technologies for e-waste separation. However, the intricate design of these devices can pose significant challenges in their implementation. Various legal, organizational, and sociological obstacles have left Serbia's e-waste management practice underdeveloped, resulting in an unsatisfactory recycling rate. In this paper, we examined the possibility of using robots in the precise example of recycling refrigerators in a recycling center in Eastern Serbia, concluding that such a solution would have multiple positive effects, both on the employees and the working environment, on the operations of the recycling center itself, and on increasing the e-waste recycling rate in the country. [ABSTRACT FROM AUTHOR]

The increasing pressure on natural resources and the climate has been noted by businesses and governments worldwide, who now face the difficult task of integrating paths of environmental sustainability and economic growth. One promising approach to sustainable development, reducing the pressure on natural resources and solving waste problems is circular economy. From different ways of implementing circular economy, this study focuses on the productization of industrial side streams, which carry a great deal of underutilized potential. In this article, the productization of pulp and paper industry side stream, fiber sludge, for commercial use as a dust-binding agent is studied via a descriptive, in-depth case study. Apart from inconsistent quality, fluctuating supply, cost of storage and logistics, what makes industrial side stream utilization challenging is the lack of knowledge that stakeholders have about side streams and their utilization and the lack of new value chain development for their commercial use. Therefore, it is essential for all parties involved to have a clearer vision of what is being sold for what purposes, through productization. This study found that the productization of side streams follows the same steps as the productization of any other traditional product, and the productized side streams can be added to the company's product portfolio as by-products. [ABSTRACT FROM AUTHOR]

Waste paper disposed in landfills notably contributes to greenhouse gas (GHG) emissions and impedes more sustainable, circular alternatives, such as recycling. In Hong Kong, this unsustainable approach is currently dominant as 68% of waste paper products are treated in landfills in 2020. To contextualize the impact of local waste paper management and explore mitigation potentials of circular alternatives, this paper develops a quantitative assessment framework around GHG emissions development trajectories. Combining guidelines of the Intergovernmental Panel on Climate Change (IPCC), national GHG inventories, and local parameters from life cycle analysis, five GHG emissions projections were simulated along the Shared Socioeconomic Pathways (SSPs) until 2060. Most recent baselines indicate that Hong Kong's current waste paper treatment generated 638,360 tons CO 2 -eq in 2020, comprising 1,821,040 tons CO 2 -eq from landfill and 671,320 tons CO 2 -eq from recycling, and −1,854,000 tons CO 2 -eq from primary material replacement. Proceeding along a Business-as-Usual scenario under SSP5, GHG emissions will dramatically increase to a net 1,072,270 tons CO 2 -eq by 2060, whereas a recycling-intensive scenario will lead to a net saving of −4,323,190 tons CO 2 -eq. To complement the quantitative evidence on the benefits of waste paper recycling, field research was conducted to explore the feasibility of circular policy innovation from the perspective of recycling stakeholders. These empirical qualitative and quantitative findings from stakeholders' business routines and material transactions provide crucial indications for policy and institutional innovation: Essentially, for Hong Kong to improve waste paper recycling capacities and facilitate a circular economy (CE), local stakeholders require support via fiscal policy measures (financial subsidies or tax reductions) and infrastructure improvements (delivery access and material storage). In sum, this study employs a novel analytical framework combining original qualitative and quantitative evidence to provide policy innovation towards circular, GHG emission-saving waste paper management. [Display omitted] • A new framework assessing greenhouse gas emissions from waste paper treatment. • Exploring long-term carbon neutrality pathways for managing waste paper. • Using empirical evidence from recycling stakeholders for circular policy innovation. [ABSTRACT FROM AUTHOR]

Featured Application: Papermaking industry and technology. Innovative applications of vegetal residues. This study examines the potential of four invasive plant species, both arboreal and herbaceous, within the riparian forest of the Umia River in Galicia, a common ecosystem in northern Spain. These invasive species (Arundo donax, Phytolacca americana, Eucalyptus globulus, and Tradescantia fluminensis) were collected and assessed for their suitability as an alternative source of pulp and paper materials for the paper industry to mitigate the environmental impacts associated with conventional cellulose fiber production from harmful monocultures. Cellulosic material from leaves, bark, and/or stems of each of the selected species was isolated from lignin and hemicelluloses through kraft pulping processes. Resulted fibers and pulps were analyzed visually, morphologically, chemically, and mechanically to evaluate their papermaking properties. To compare these properties with those of commercially available pulp, test sheets were concurrently produced using commercial bleached Eucalyptus cellulose. The findings reveal that the employed fibers exhibit promising characteristics for artistic paper production. Regarding the pulp, two refining times were tested in a PFI machine, and the Schopper–Riegler degree was measured. Paper sheets underwent various tests to determine thickness, basis weight, apparent volume, apparent density, permeability, and chemical composition, as well as microscopic optical and morphological properties. The fibers obtained from the waste derived from the removal of invasive exotic species and biodiversity control present a viable and intriguing alternative for decentralized paper production, yielding noteworthy results for the creative sector. This research highlights the potential of harnessing invasive species for sustainable and innovative paper manufacturing practices. [ABSTRACT FROM AUTHOR]

This study examines the generation and treatment of disposable single-use paper cups at Lappeenranta University of Technology (LUT) campus located in Finland. The study was carried out within the LUT campus considering take-away venues and the waste collection system, with the intersection of the local waste treatment system. The University was considered as a closed system where different activities and services are taking place. This work contributes to a better understanding of newly adopted circularity measures and application possibilities. The research attempted to evaluate the environmental impacts, and reduction options of disposable single-use paper cups within the Lappeenranta University of Technology (LUT) campus, and measured the circularity indicator of single-use paper cups.

Abstract Papermaking enterprises are currently under both environmental pressure and economic pressure for sustainable development in China. Thus, the efficiency, effectiveness, and benefits of resource utilization need to be improved. High-consumption and high-pollution companies should manufacture paper using sustainable methods. This study highlights a resource value flow analysis from the circular economy perspective, developing an extension of material flow cost accounting and modifying it by accounting for environmental damage as well as economic benefits. With reference to the Plan-Do-Check-Act cycle, this specific case study was conducted to verify the comprehensive utility of resource value flow analysis by establishing decision-making prioritization according to the dualistic diagnosis of "internal resource loss–external environmental damage costs." In general, applying a resource value flow analysis can both reduce resource consumption and minimize environmental damage, enhancing the sustainable development of a process industry with limited resources. Highlights • Material flows and value flows form an interactive unit in the resource value flow analysis model. • The resource value flow analysis model extends the environmental dimension of material flow cost accounting. • A dualistic diagnosis of "internal resource loss and external environmental damage costs" can achieve both economic profits and environmental benefits. • The Plan-Do-Check-Act cycle was introduced to strengthen the practical application of the resource value flow analysis. [ABSTRACT FROM AUTHOR]

Featured Application: One of the main technological challenges within Circular Economy strategies is to minimize the environmental impact of plastic packaging. In this regard, the use of PHBV films to coat paper sheets represents a highly sustainable strategy to produce food packaging multilayer structures with improved mechanical and barrier properties. This work reports on the development and performance evaluation of newly developed paper sheets coated, on both sides, with thin films of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) for applications of food packaging. For this, PHBV/paper/PHBV multilayers were first prepared by the thermo-sealing technique, optimizing the process variables of temperature and time. Thereafter, the multilayer sheets were characterized in terms of their morphological, optical, thermal, mechanical, and barrier properties and compared with equivalent paper structures double coated with high-barrier multilayer films of petrochemical polymers. The results indicated that the double coatings of PHBV successfully improved the mechanical resistance and ductility, protected from moisture, and also reduced the aroma and oxygen permeances of paper, having a minimal effect on its optical and thermal properties. Finally, the compostability of the resultant multilayer sheets was analyzed, confirming that the presence of the PHBV coatings slightly delayed the aerobic biodegradation and disintegration of paper. [ABSTRACT FROM AUTHOR]

Invasive plant species can impede the establishment and growth of native plants and affect several ecosystem properties. These properties include soil cover, nutrient cycling, fire regimes, and hydrology. Controlling invasive plants is therefore a necessary, but usually expensive, step in restoring an ecosystem. The sustainability of materials with an emphasis on the use of local resources plays an important role in the circular economy. The use of alternative fibers from invasive plants promotes local production in smaller paper mills that offer the protection of local species and the reduction of waste and invasive plants. A synthesis of the literature is needed to understand the various impacts of invasive plants and their practical control in the context of papermaking applications and to identify associated knowledge gaps. To improve our understanding of the practical application of invasive species in the paper industry, we reviewed the existing literature on invasive plant species in the area of fiber production, printability, coating solution production, dyes, and extracts, and collected information on the major invasive plant species in Europe and the methods used for various applications. [ABSTRACT FROM AUTHOR]

The recycled paper and board industry needs to improve the quality of their products to meet customer demands. The refining process and strength additives are commonly used to increase mechanical properties. Interfiber bonding can also be improved using cellulose nanofibers (CNF). A circular economy approach in the industrial implementation of CNF can be addressed through the in situ production of CNF using side cellulose streams of the process as raw material, avoiding transportation costs and reducing industrial wastes. Furthermore, CNF fit for use can be produced for specific industrial applications.This study evaluates the feasibility of using two types of recycled fibers, simulating the broke streams of two paper machines producing newsprint and liner for cartonboard, to produce in situ CNF for direct application on the original pulps, old newsprint (ONP), and old corrugated container (OCC), and to reinforce the final products. The CNF were obtained by 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO)-mediated oxidation and homogenization at 600 bar. Handsheets were prepared with disintegrated recycled pulp and different amounts of CNF using a conventional three-component retention system. Results show that 3 wt.% of CNF produced with 10 mmol of NaClO per gram of dry pulp improve tensile index of ONP ~30%. For OCC, the same treatment and CNF dose increase tensile index above 60%. In both cases, CNF cause a deterioration of drainage, but this effect is effectively counteracted by optimising the retention system.

The quantity of biodegradable plastics is increasing steadily and taking a larger share in the residual waste stream. As the calorific value of biodegradable plastic is almost two-fold lower than that of conventional ones, its increasing quantity decreases the overall calorific value of municipal solid waste and refuse-derived fuel which is used as feedstock for cement and incineration plants. For that reason, in this work, the torrefaction of biodegradable waste, polylactic acid (PLA), and paper was performed for carbonized solid fuel (CSF) production. In this work, we determined the process yields, fuel properties, process kinetics, theoretical energy, and mass balance. We show that the calorific value of PLA cannot be improved by torrefaction, and that the process cannot be self-sufficient, while the calorific value of paper can be improved up to 10% by the same process. Moreover, the thermogravimetric analysis revealed that PLA decomposes in one stage at ~290–400 °C with a maximum peak at 367 °C, following a 0.42 reaction order with the activation energy of 160.05 kJ·(mol·K)−1.

Packaging appearance is important in a competitive market. Designers strive to create products that attract customers and often use laminated packaging, due to the attractive appearance and quality characteristics of the material. The circular economy in the recycling of cardboard packaging helps to reduce waste, saves natural resources and increases the quality of the environment. All of the above contributes to sustainable production, but the quality and properties of the obtained recycled paper materials should not be ignored. Recycling of laminated cardboard packaging often has a negative impact on the quality of recycled paper, due to the formation of sticky particles that can affect the optical properties of recycled paper and the efficiency of the recycling process. This article provides insight into the influence of each stage of production of packaging intended for pharmaceutical products on the properties and characteristics of recycled paper. The standard INGEDE 11 deinking method was used to remove dyes and other impurities from the pulp. The obtained optical results of the characteristics of recycled laboratory sheets obtained from laminated and non-laminated cardboard samples were compared in order to determine the impact of each stage of box production on the quality of the paper pulp. The acquired knowledge can be applied in the design phase of a more sustainable product, and laminated materials can be used in luxury products or to increase the functionality of the packaging. Designing for recycling will contribute to an increase in the quality of the obtained paper mass, which is directly related to an increase in the productivity of recycling and the sustainability of the packaging production process. [ABSTRACT FROM AUTHOR]

The optimization of water management in industrial processes is paramount in diminishing or mitigating, as far as possible, the negative externalities generated by its current use within the linear economy model. This research presents methods for the optimization of wastewater from paper mills which are associated with the new sustainability and circular economy model. In this way, the concept of circular economy was applied to the wastewater treatment from a paper mill, with the objective of recovering the resources contained in this type of effluent. The wastewater treatment plant is based on a biological reactor of activated sludge, and treats a flow of 4868 m3·day−1. This study proposes the development and evaluation of indicators of circular economy applied to wastewater from a paper mill, as well as the assessment of the removal performance of color, total suspended solids (TSS), biochemical oxygen demand on the fifth day (BOD5), and chemical oxygen demand (COD), which are higher than 96% in all cases. Per 1 m3 of wastewater from a paper mill, a volume of 0.9 m3 of potentially reusable water and a recovered sludge mass of 0.7 kg are generated; the latter is reused as a mineral filler during the process itself. In light of this, a multivariable statistical analysis was applied to determine the relationship of the operation variables and indicators of circular economy. In this way, wastewater from the paper mill can be regarded as a technological nutrient, which is partially reintroduced into the production process, enabling the recovery of the water and mineral fillers that it contains.

Pulp and paper industry produces massive amounts of sludge from wastewater treatment, which constitute an enormous environmental challenge. A possible management option is the conversion of sludge into carbon-based adsorbents to be applied in water remediation. For such utilization it is important to investigate if sludge is a consistent raw material originating reproducible final materials (either over time or from different manufacturing processes), which is the main goal of this work. For that purpose, different primary (PS) and biological sludge (BS) batches from two factories with different operation modes were sampled and subjected to pyrolysis (P materials) and to pyrolysis followed by acid washing (PW materials). All the materials were characterized by proximate analysis, total organic carbon (TOC) and inorganic carbon (IC), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and N 2 adsorption isotherms (specific surface area ( S BET )and porosity determination). Sludge from the two factories proved to have distinct physicochemical properties, mainly in what concerns IC. After pyrolysis, the washing step was essential to reduce IC and to considerably increase S BET , yet with high impact in the final production yield. Among the materials here produced, PW materials from PS were those having the highest S BET values (387–488 m 2 g −1 ). Overall, it was found that precursors from different factories might originate final materials with distinct characteristics, being essential to take into account this source of variability when considering paper mill sludge as a raw material. Nevertheless, for PS, low variability was found between batches, which points out to the reliability of such residues to be used as precursors of carbon adsorbents. [ABSTRACT FROM AUTHOR]