Search

In this study, Taguchi experimental design was used to the optimize operating parameters for the degradation of paper mill effluent using electrochemical (EC) process with two-dimensional concentric aluminum tube electrodes (CATE). For this purpose, four significant experimental factors were used in four levels pH (6–9), electrolysis time (10–40 min), voltage (6–12 V) and surface area (357–624 cm(2)). The process parameters were optimized, through performing L16 orthogonal array of Taguchi technique, for the removal of chemical oxygen demand (COD) and turbidity. The percent COD and turbidity reductions were transferred into an accurate S/N ratio for a larger value is the better (LBT) response. The study presents a unique method of finding optimum combination of process parameters to illustrate their effect on the turbidity and COD reduction. The treatment conditions for the maximum elimination of the pollutants were second level of pH (7), third level of ET (30 min), fourth level of voltage (12 V) and second level of surface area (446 cm(2)). The confirmation experiment results were within the confidence intervals (CI) indicating an acceptable agreement between predicted and observed values. Based on the p-values, the electrolysis time and voltages were found to be the most significant factors for both COD and turbidity reduction. The findings of research indicated, that the Taguchi method can be used successfully for the treatment of paper industry effluent by electrochemical technique.

Background Lysine succinylation is a naturally occurring post-translational modification (PTM) that is ubiquitous in organisms. Lysine succinylation plays important roles in regulating protein structure and function as well as cellular metabolism. Global lysine succinylation at the proteomic level has been identified in a variety of species; however, limited information on lysine succinylation in plant species, especially paper mulberry, is available. Paper mulberry is not only an important plant in traditional Chinese medicine, but it is also a tree species with significant economic value. Paper mulberry is found in the temperate and tropical zones of China. The present study analyzed the effects of lysine succinylation on the growth, development, and physiology of paper mulberry. Results A total of 2097 lysine succinylation sites were identified in 935 proteins associated with the citric acid cycle (TCA cycle), glyoxylic acid and dicarboxylic acid metabolism, ribosomes and oxidative phosphorylation; these pathways play a role in carbon fixation in photosynthetic organisms and may be regulated by lysine succinylation. The modified proteins were distributed in multiple subcellular compartments and were involved in a wide variety of biological processes, such as photosynthesis and the Calvin-Benson cycle. Conclusion Lysine-succinylated proteins may play key regulatory roles in metabolism, primarily in photosynthesis and oxidative phosphorylation, as well as in many other cellular processes. In addition to the large number of succinylated proteins associated with photosynthesis and oxidative phosphorylation, some proteins associated with the TCA cycle are succinylated. Our study can serve as a reference for further proteomics studies of the downstream effects of succinylation on the physiology and biochemistry of paper mulberry.

Background Since the COVID-19 pandemic has occurred, nations showed their unpreparedness to deal with a mass casualty incident of this proportion and severity, which resulted in a tremendous number of deaths even among healthcare workers. The World Society of Emergency Surgery conceived this position paper with the purpose of providing evidence-based recommendations for the management of emergency surgical patients under COVID-19 pandemic for the safety of the patient and healthcare workers. Method A systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Review and Meta-analysis Protocols (PRISMA-P) through the MEDLINE (PubMed), Embase and SCOPUS databases. Synthesis of evidence, statements and recommendations were developed in accordance with the GRADE methodology. Results Given the limitation of the evidence, the current document represents an effort to join selected high-quality articles and experts’ opinion. Conclusions The aim of this position paper is to provide an exhaustive guidelines to perform emergency surgery in a safe and protected environment for surgical patients and for healthcare workers under COVID-19 and to offer the best management of COVID-19 patients needing for an emergency surgical treatment. We recommend screening for COVID-19 infection at the emergency department all acute surgical patients who are waiting for hospital admission and urgent surgery. The screening work-up provides a RT-PCR nasopharyngeal swab test and a baseline (non-contrast) chest CT or a chest X-ray or a lungs US, depending on skills and availability. If the COVID-19 screening is not completed we recommend keeping the patient in isolation until RT-PCR swab test result is not available, and to manage him/she such as an overt COVID patient. The management of COVID-19 surgical patients is multidisciplinary. If an immediate surgical procedure is mandatory, whether laparoscopic or via open approach, we recommend doing every effort to protect the operating room staff for the safety of the patient.

Eco-friendly and cost-effective materials and processes to manufacture functional substrates are crucial to further advance the area of printed electronics. One potential key component in the printed electronics platform is an electrically functionalized paper, produced by simply mixing common cellulosic pulp fibers with high-performance electroactive materials. Herein, an electronic paper including nanographite has been prepared using a standardized and scalable papermaking technique. No retention aid was needed to achieve a conducting nanographite loading as high as 50 wt %. The spontaneous retention that provides the integrity and stability of the nanographite paper, likely originates partially from an observed water-stable adhesion of nanographite flakes onto the fiber surfaces. The resulting paper exhibits excellent electrical characteristics, such as an in-plane conductivity of 107 S/cm and an areal capacitance of 9.2 mF/cm(2), and was explored as the back-electrode in printed electrochromic displays. Funding Agencies|Digital Cellulose Centre, a competence center set up by the Swedish Innovation Agency VINNOVA; consortium of Swedish forest industries; Wallenberg Wood Science Center (Knut and Alice Wallenberg Foundation); VINNOVA "EPIC" projectVinnova [2017-05413]; Karl-Erik Onnesjo Foundation

The synthesis and preparation of 12 chromogenic polymers used to build an intelligent label for security paper applications are described. The process involves coating paper sheets with the polymers. Depending on the number of different polymers used in a combinatory way, a maximum of 1212 combinations is possible, thus creating a matrix that is practically impossible to counterfeit. Currently, most anticounterfeiting proposals for paper-based packaging and documents involve some sort of verification under ultraviolet radiation, and the requirement of additional equipment often relegates the end-user to a passive role. In contrast, in our approach, the combination of sensory polymers in an array gives rise to an invisible label, i.e., an owner cryptographic key, which becomes visible upon scattering a nitrite solution (e.g., spraying or using an impregnated foam roller) over the printed label on the security paper. For this purpose, a monomer containing an aromatic primary amino group and another with an activated aromatic ring are covalently bonded to a polymer with high affinity toward paper, consisting essentially of units of methyl methacrylate and 1-vinyl-2-pyrrolidone. Subsequently, the paper samples are coated with the resulting sensory chromogenic polymer. By spraying, painting, or staining an aqueous acid solution of NaNO2 (at least 1.20 g/L) and the chromogenic polymers, a well-defined color appears, because of the formation of an azo compound. This process provides users with a quick and facile authentication method without additional equipment and without affecting paper strength., S.V. received funding from “La Caixa” Foundation (Grant No. LCF/PR/PR18/51130007). J.M.G. received funding from “Spanish Agencia Estatal de Investigación “ Grant No. PID2020-113264RB-I00/AEI/10.13039/ 501100011033. A.V. received funding from Portugal 2020 in the frame of COMPETE 2020 No. 246/AXIS II/2017 (Project No. 21874). We also gratefully acknowledge European Regional Development Fund (ERDF).

A paper-based electrode is a very attractive component for a disposable, nontoxic, and flexible biosensor. In particular, wearable biosensors, which have recently been attracting interest, not only require these characteristics of paper-based electrodes but must also be able to detect various ions and biomolecules in biological fluids. In this paper, we demonstrate the detection ability of paper-based metal electrodes for wearable biosensors as part of a wireless potentiometric measurement system, focusing on the detection of pH and sodium ions. The paper-based metal electrodes were obtained by simply coating a silicone-rubber-coated paper sheet with a Au (/Cr) thin film by sputtering then modifying it with different functional membranes such as an oxide membrane (Ta2O5) and a fluoropolysilicone (FPS)-based Na+-sensitive membrane, corresponding to the targeted ions. Satisfactory and stable detection sensitivities of the modified paper-based Au electrodes were obtained over several weeks even when they were bent to a radius of curvature in the range of 6.5 to 25 mm, assuming use in a flexible body patch biosensor. Moreover, the Na+ concentration in a sweat sample was evaluated using the paper-based Au electrode with the FPS-based Na+-sensitive membrane in a wireless and real-time manner while the electrode was bent. Thus, owing to their complex mesh structure, flexible paper sheets should be suitable for use as potentiometric electrodes for wearable wireless biosensors., Graphical abstarct

This research has developed a method for rapid detection of SARS-CoV-2 N protein on a paper-based microfluidic chip. The chitosan-glutaraldehyde cross-linking method is used to fix the coated antibody, and the sandwich enzyme-linked immunosorbent method is used to achieve the specific detection of the target antigen. The system studied the influence of coating antibody concentration and enzyme-labeled antibody concentration on target antigen detection. According to the average gray value measured under different N protein concentrations, the standard curve of the method was established and the sensitivity was tested, and its linear regression was obtained. The equation is y = 9.8286x+137.6, R2 = 0.9772 > 0.90, which shows a high degree of fit. When the concentration of coating antibody and enzyme-labeled antibody were 1 μg/mL and 2 μg/mL, P > 0.05, the difference was not statistically significant, so the lower concentration of 1 μg/mL was chosen as the coating antibody concentration. The results show that the minimum concentration of N protein that can be detected by this method is 8 μg/mL, and the minimum concentration of coating antibody and enzyme-labeled antibody is 1 μg/mL, which has the characteristics of high sensitivity and good repeatability.

PURPOSE: Main insight of the study was to evaluate the potential of Perionyx excavatus, an indigenous earthworm of India towards bioconversion of toxic paper mill wastes. The study had considered a comprehensive study over succession of different enzymes and microbial biomasses alongside removal of heavy metals to reflect the qualitative enrichment of the toxic waste through valorisation procedure. METHODS: The process of vermicomposting was performed using ratio of paper mill sludge: cow dung: straw as 5:4:1 and Perionyx excavatus for a period of 60 days. Qualitative enrichment was considered through detailed evaluation of physicochemical parameters and succession of 19 enzymes using API ZYM technology. Heavy metal loads in terms of Zn, Cr, Cu, Pb along with bioaccumulation factor (BAF) were considered to establish functional role of earthworm in bioremediation. Microbial succession was measured in terms of PLFA biomarkers. RESULTS: Enzymatic enrichment of different isozymes of esterase, aminopeptidase and glycosyl hydrolase were found in the vermicompost. A significant reduction of heavy metals was noticed in vermicomposting of primary sludge as Zn > Pb > Cr > Cu and secondary sludge as Zn > Pb > Cu > Cr. An increase in density of Gram positive bacterial and fungal populations was found at the end phase of vermicomposting process which supports maturity of vermicompost. CONCLUSION: Presence of different enzyme activities, reduction of heavy metal loads along with rise of eukaryotic PLFA markers, had illustrated the efficiency of vermicomposting as a valorisation procedure in the qualitative enrichment of toxic organic paper mill sludge.

This study focuses on the production and characterization of biodegradable handmade paper from the Sida rhombifolia plant (SRP) cellulose. Sida rhombifolia plant is a seasonal plant that grows in the equatorial and tropical climates. The studies carried out on this SRP were aimed at investigating the methods required for the production of handmade paper from SRP plant and also at determining the tensile strength. Four specimens of SRP paper of different additive labels S0 (no additive), S1 (starch and KOH), S2 (starch), and S3 (Foska liquid glue) were produced using the Kraft method. Tensile properties (stress at break, elongation at break, and Young’s modulus), the rate of water absorption, and the rate of moisture absorption were carried out. Results showed that the addition of potassium hydroxide considerably reduces Young’s modulus of SRP handmade paper (S1) while the Foska liquid glue (S3) significantly improves it. In addition, the addition of potassium hydroxide and Foska liquid substantially improves the water absorption properties of the paper S2 and S3, respectively. The adhesive liquid creates more porosity and consequently increases the absorption of water. The addition of potassium hydroxide and Foska liquid significantly embedded the rate of moisture absorption. From the results obtained, it can be concluded that the paper S3 can be used as packaging paper since it has better mechanical properties and moisture absorption.

Relatively little is known about the processes shaping population structure in cooperatively breeding insect species, despite the long-hypothesized importance of population structure in shaping patterns of cooperative breeding. Polistes paper wasps are primitively eusocial insects, with a cooperative breeding system in which females often found nests in cooperative associations. Prior mark-recapture studies of Polistes have documented extreme female philopatry, although genetic studies frequently fail to detect the strong population structure expected for highly philopatric species. Together these findings have led to lack of consensus on the degree of dispersal and population structure in these species. This study assessed population structure of female Polistes fuscatus wasps at three scales: within a single site, throughout Central New York, and across the Northeastern United States. Patterns of spatial genetic clustering and isolation by distance were observed in nuclear and mitochondrial genomes at the continental scale. Remarkably, population structure was evident even at fine spatial scales within a single collection site. However, P. fuscatus had low levels of genetic differentiation across long distances. These results suggest that P. fuscatus wasps may employ multiple dispersal strategies, including extreme natal philopatry as well as longer-distance dispersal. We observed greater genetic differentiation in mitochondrial genes than in the nuclear genome, indicative of increased dispersal distances in males. Our findings support the hypothesis that limited female dispersal contributes toward population structure in paper wasps.

BackgroundThe EAPC White Paper addresses the issue of spiritual care education for all palliative care professionals. It is to guide health care professionals involved in teaching or training of palliative care and spiritual care; stakeholders, leaders and decision makers responsible for training and education; as well as national and local curricula development groups.MethodsEarly in 2018, preliminary draft paper was written by members of the European Association for Palliative Care (EAPC) spiritual care reference group inviting comment on the four core elements of spiritual care education as outlined by Gamondi et al. (2013) in their paper on palliative care core competencies. The preliminary draft paper was circulated to experts from the EAPC spiritual care reference group for feedback. At the second stage feedback was incorporated into a second draft paper and experts and representatives of national palliative care organizations were invited to provide feedback and suggest revisions. The final version incorporated the subsequent criticism and as a result, the Gamondi framework was explored and critically revised leading to updated suggestions for spiritual care education in palliative care.ResultsThe EAPC white paper points out the importance of spiritual care as an integral part of palliative care and suggests incorporating it accordingly into educational activities and training models in palliative care. The revised spiritual care education competencies for all palliative care providers are accompanied by the best practice models and research evidence, at the same time being sensitive towards different development stages of the palliative care services across the European region.ConclusionsBetter education can help the healthcare practitioner to avoid being distracted by their own fears, prejudices, and restraints and attend to the patient and his/her family. This EAPC white paper encourages and facilitates high quality, multi-disciplinary, academically and financially accessible spiritual care education to all palliative care staff.

Background Brucellosis, as a serious zoonotic infectious disease, has been recognized as a re-emerging disease in the developing countries worldwide. In china, the incidence of brucellosis is increasing each year, seriously threatening the health of humans as well as animal populations. Despite a quite number of diagnostic methods currently being used for brucellosis, innovative technologies are still needed for its rapid and accurate diagnosis, especially in area where traditional diagnostic is unavailable. Methodology/Principal findings In this study, a total of 22 B cell linear epitopes were predicted from five Brucella outer membrane proteins (OMPs) using an immunoinformatic approach. These epitopes were then chemically synthesized, and with the method of indirect ELISA (iELISA), each of them displayed a certain degree of capability in identifying human brucellosis positive sera. Subsequently, a fusion protein consisting of the 22 predicted epitopes was prokaryotically expressed and used as diagnostic antigen in a newly established brucellosis testing method, nano-ZnO modified paper-based ELISA (nano-p-ELISA). According to the verifying test using a collection of sera collected from brucellosis and non-brucellosis patients, the sensitivity and specificity of multiepitope based nano-p-ELISA were 92.38% and 98.35% respectively. The positive predictive value was 98.26% and the negative predictive value was 91.67%. The multiepitope based fusion protein also displayed significantly higher specificity than Brucella lipopolysaccharide (LPS) antigen. Conclusions B cell epitopes are important candidates for serologically testing brucellosis. Multiepitope fusion protein based nano-p-ELISA displayed significantly sensitivity and specificity compared to Brucella LPS antigen. The strategy applied in this study will be helpful to develop rapid and accurate diagnostic method for brucellosis in human as well as animal populations., Author summary Brucellosis is one of the most important zoonosis in the world and has caused tremendous economic losses in agriculture and animal husbandry in many countries. Developing rapid, sensitive and specific diagnostic methods is very important for early detection and treatment of brucellosis patients. In this study, a novel diagnostic technique, nano-ZnO modified paper ELISA, was established. The antigen used in this technique was a fusion protein containing multiple B cell epitopes, which were predicted from Brucella major outer membrane proteins such as Bp26, Omp31, Omp16, Omp2b and Omp25. Comparing to traditional LPS antigen, this multiepitope based antigen displayed considerably higher sensitivity and higher specificity in laboratory. With the strategy described in this paper, more efficient epitopes and protein antigen can be identified in the future. Currently, LPS antigen is only prepared from live Brucella, while protein antigen can be produced in large quantities in prokaryotic expression system. In addition to nano-p-ELISA, this protein antigen can also be used for development other methods such as fluorescent polarization assay (FPA) and immunochromatographic assay (ICA) to meet the varied demand for brucellosis testing.

A newly modified paper-based enzyme-linked immunosorbent assay (P-ELISA) was established by immobilizing more proteins on the paper surface through an atom transfer radical polymerization (ATRP) reaction. In addition, introducing graphene oxide (GO) sheets, Au nanoparticles (AuNps) and two primary antibodies (Ab1s) led to signal amplification and cost reduction. Electronic supplementary material The online version of this article (10.1186/s13065-019-0622-7) contains supplementary material, which is available to authorized users.

No abstract available.

Background Cord‐blood and heel‐prick TSH levels are essential in diagnosing and preventing the serious complications of congenital hypothyroidism, which mainly include intellectual disability. The study aimed to compare between cord‐blood and heel‐prick TSH sensitivity and specificity in detecting congenital hypothyroidism (CH) among newborn screened babies. Method The study included 21,012 newborn screened babies for congenital hypothyroidism starting from September 2013 until March 2019. Both cord‐blood and heel‐prick TSH were collected from each newborn. Heel prick and cord‐blood TSH cutoff values of >21 μU/ml and >30 mIU/L respectively were considered positive. Results Out of the total screened newborns, 12 were confirmed for having primary congenital hypothyroidism. Nine cases were positive for cord‐blood TSH (Sensitivity 75%, specificity 99.9%, and a recall rate of 0.004%), while 139 cases were positive for heel‐prick blood TSH (Sensitivity of 100%, specificity of 99.3%, and a recall rate of 0.60%). Conclusion For the screening of CH, heel prick is considered a superior method, but cord blood remains a practical option due to its cost‐effectiveness, immediate action, and lower recall rate. Therefore, whenever recall is difficult and/or early discharge is the practice, cord blood is an alternative method to heel prick but not with cases of prematurity., Cord blood and heel prick TSH levels are essential in diagnosing and preventing congenital hypothyroidism (CH). Out of the total screened newborn 12 were confirmed for having primary congenital hypothyroidism. 10 cases were positive for cord blood TSH (Sensitivity 75%, specificity 99.9%, and a recall rate of 0,004%) while 139 cases were positive for heel prick blood TSH (Sensitivity 100%, specificity 99.3%, and a recall rate of 0.60%). Cord blood is an alternative method to heel‐prick but not with cases of prematurity.

Currently, all assays measuring acetylcholinesterase (AChE) activity following a suspected nerve agent exposure leverage methodologies that fail to identify the agent. This limits the overall effectiveness and ability to administer proper countermeasures. As such, there is an urgent need to identify novel, rapid, and more comprehensive approaches to establish AChE activity, including identification of the toxicant. Paper spray mass spectrometry was used to monitor the activity of acetylcholinesterase, both in-solution and on modified hydrophobic paper surface. Hydrophobic paper surfaces were prepared using vaporized trichloro(3,3,3-trifluoropropyl)silane. In both approaches, mixtures of diluted human whole blood with and without VX were mixed with a non-endogenous AChE specific substrate, 1,1-dimethyl-4-acetylthiomethylpiperidinium (MATP+). Formation of the cleaved MATP+ product was monitored over time and compared to MATP+ to determine relative AChE activity. This on-substrate assay was effective at determining AChE activity and identifying the toxicant; however, determination of AChE activity in-solution proceeded at a slower rate. The on-substrate assay serves as a pioneering example of an enzymatic reaction occurring on the surface of a paper spray ionization ticket. This work broadens the range of applications relating to paper spray ionization-based clinical diagnostic assays. Graphical Abstractᅟ Electronic supplementary material The online version of this article (10.1007/s13361-018-2072-1) contains supplementary material, which is available to authorized users.

Paper electronics offer an environmentally sustainable option for flexible and wearable systems and perfectly fit the available printing technologies for high manufacturing efficiency. As the heart of energy‐consuming devices, paper‐based batteries are required to be compatible with printing processes with high fidelity. Herein, hydrogel reinforced cellulose paper (HCP) is designed to serve as the separator and solid electrolyte for paper batteries. The HCP can sustain higher strain than pristine papers and are biodegradable in natural environment within four weeks. Zinc‐metal (Ni and Mn) batteries printed on the HCP present remarkable volumetric energy density of ≈26 mWh cm–3, and also demonstrate the feature of cuttability and compatibility with flexible circuits and devices. As a result, self‐powered electronic system could be constructed by integrating printed paper batteries with solar cells and light‐emitting diodes. The result highlights the feasibility of hydrogel reinforced paper for ubiquitous flexible and eco‐friendly electronics., Hydrogel reinforced cellulose paper presents enhanced mechanical and conductivity properties that make them suitable as the separator and quasi‐solid electrolyte for paper batteries. The printed zinc batteries (Mn–Zn and Ni–Zn) are flexible, cuttable, and potentially integrable with other paper electronics.

Raman spectroscopy has been widely used to measure thermophysical properties of 2D materials. The local intense photon heating induces strong thermal nonequilibrium between optical and acoustic phonons. Both first principle calculations and recent indirect Raman measurements prove this phenomenon. To date, no direct measurement of the thermal nonequilibrium between optical and acoustic phonons has been reported. Here, this physical phenomenon is directly characterized for the first time through a novel approach combining both electrothermal and optothermal techniques. While the optical phonon temperature is determined from Raman wavenumber, the acoustic phonon temperature is precisely determined using high‐precision thermal conductivity and laser power absorption that are measured with negligible nonequilibrium among energy carriers. For graphene paper, the energy coupling factor between in‐plane optical and overall acoustic phonons is found at (1.59–3.10) × 1015 W m−3 K−1, agreeing well with the quantum mechanical modeling result of 4.1 × 1015 W m−3 K−1. Under ≈1 µm diameter laser heating, the optical phonon temperature rise is over 80% higher than that of the acoustic phonons. This observation points out the importance of subtracting optical–acoustic phonon thermal nonequilibrium in Raman‐based thermal characterization., The optical–acoustic phonon thermal nonequilibrium is first probed through novel electrothermal and optothermal techniques. For graphene paper, the optical‐acoustic phonon energy coupling factor is found at (1.59–3.10) × 1015 W m−3 K−1, agreeing well with theoretical predictions. Under ≈1 µm laser heating, the optical phonon temperature rise is over 80% higher than that of the acoustic phonons.

Arsenic contamination in groundwater is a supreme environmental problem, and levels of this toxic metalloid must be strictly monitored by a portable, sensitive and selective analytical device. Herein, a new system of smartphone-integrated paper sensors with Cu nanoclusters was established for the effective detection of As(III) in groundwater. For the integration system, the fluorescence emissive peak of Cu nanoclusters at 600 nm decreased gradually with increasing As(III) addition. Meanwhile, the fluorescence colour also changed from orange to colourless, and the detection limit was determined as 2.93 nM (0.22 ppb) in a wide detection range. The interfering ions also cannot influence the detection selectivity of As(III). Furthermore, the portable paper sensors based on Cu nanoclusters were fabricated for visual detection of As(III) in groundwater. The quantitative determination of As(III) in natural groundwater has also been accomplished with the aid of a common smartphone. Our work has provided a portable and on-site detection technique toward As(III) in groundwater with high sensitivity and selectivity.

Resumen Contrario a lo que se ha señalado tradicionalmente, el marco teórico muchas veces constituye una sección independiente de la introducción en los artículos de investigación. En este, los escritores establecen la tradición teórica desde la cual se desarrolla la investigación y hacen un recuento de los avances teóricos e investigativos en la disciplina y específicamente en el tema del estudio, estableciendo un diálogo con otras voces. En este artículo, se examina cómo los escritores organizan su marco teórico mediante las cláusulas verbales y los recursos del subsistema de graduación propuestos por la lingüística sistémico-funcional para expresar fuerza y construir su voz autorial. Se identificaron las cláusulas verbales y los recursos del subsistema de graduación asociados a ellas en las secciones de marco teórico de veinte artículos científicos en español, publicados en revistas colombianas del área de la lingüística aplicada. El análisis mostró la variedad de recursos con los que los escritores dan fuerza a sus referentes conceptuales, desde las cláusulas verbales, especialmente en lugares prominentes del marco teórico: en los macroTemas, hiperTemas, macroNuevos e hiperNuevos. Comprender estas características del marco teórico puede ser relevante para la enseñanza de la escritura académica. Abstract Opposite to what is traditionally stated, the theoretical framework often constitutes an independent section in research articles. Therein writers establish the theoretical tradition that supports their research and make an account of the theoretical and research developments in their discipline, specifically, in their topic of research, thus establishing a dialogue with other voices. This article examines how writers organize their theoretical framework by means of verbal clauses using the resources of the graduation subsystem proposed by the systemic functional linguistics to express force -which will help them to construct their authorial voice. This study analyzed the verbal clauses and the graduation resources of the theoretical frameworks in 20 research articles in Spanish language published in Colombian journals from the area of applied linguistics. Findings show the variety of resources deployed by writers in their verbal clauses to strengthen their commitment to their tenets, especially in prominent places of their theoretical framework, such as the macroTheme, hyperThemes, macroNew and hyperNew. Awareness of these theoretical framework features may be relevant for teaching academic writing. Résumé Contrairement à ce qui a été traditionnellement dit, le cadre théorique constitue maintes fois une section indépendante de l'introduction dans les articles de recherche. Dans le cadre théorique, les auteurs élaborent la tradition théorique à partir de laquelle leur recherche est développée et font une recension de l'histoire des avancées de la théorie et de la recherche dans leur discipline et, plus particulièrement, selon leur sujet d’étude. Il s´y établit ainsi une polyphonie conceptuelle. Dans cet article, nous examinons comment les auteurs organisent leur cadre théorique en ayant recours à des clauses verbales et en s´appuyant sur les ressources du sous-système de la gradation de la linguistique systémique fonctionnelle pour exprimer de la force, ainsi construire leur voix auctoriale. Nous avons analysé les clauses verbales ainsi que les ressources du sous-système de graation associés dans la section du cadre théorique de vingt articles scientifiques en espagnol, publiés dans des revues spécialisées du domaine de la linguistique appliquée. L'analyse a montré la diversité des ressources déployées par les auteurs visant à donner de la force à leurs référents conceptuels à partir des clauses verbales, en particulier à des endroits bien précis dans le cadre théorique : dans les macro-thèmes, hyper-thèmes, macro-nouveaux et hyper-nouveaux. La com préhension de ces caractéristiques du cadre théorique peut être pertinente pour l'enseignement de l'écriture universitaire.

Graphical abstract, Introduction Due to its high specificity and sensitivity, liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) is the gold standard method for immunosuppressant quantification in therapeutic drug monitoring. In this context, dried blood spots (DBS) have become a promising strategy as a sample collection procedure. Although the advantages of DBS over venipuncture are well known, this approach has limitations that strongly influence the acceptance of analytical results. Among them, the most important is hematocrit (Ht). The easiest way of overcoming this problem is by analyzing complete spots. In this strategy, called dried matrix on paper discs (DMPD), blood is volumetrically applied on pre-punched discs. Objectives To validate an LC-MS/MS method for the quantification of tacrolimus, sirolimus, everolimus and cyclosporin A using DMPD. Methods The procedure was validated according to international guidelines using a commercial kit. The following performance parameters were evaluated: selectivity, carryover, linearity, accuracy, precision, lower limit of quantitation, relative recovery, commutability and stability. In addition, a method comparison study was performed to evaluate the clinical influence of Ht on the results. Results All performance parameters were within acceptance criteria and, hence, it was determined that the validated method is fit for the intended purpose. Likewise, calculated bias values on medical decision levels showed that there was no clinical influence of Ht on the results. Conclusion Unlike other similar methodologies that have been published, here, a simple method has been fully validated. This is the first LC-MS/MS methodology adapting a commercial kit to use DMPD as a sampling strategy.

Paper‐based sensors, microfluidic platforms, and electronics have attracted attention in the past couple of decades because they are flexible, can be recycled easily, environmentally friendly, and inexpensive. Here we report a paper‐based potentiometric sensor to detect the whole Zika virus with a minimum sensitivity of 0.26 nV/Zika and a minimum detectable signal (MDS) of 2.4x107 Zika. Our paper sensor works very similar to a P‐N junction where a junction is formed between two different regions with different electrochemical potentials on the paper. These two regions with slightly different ionic contents, ionic species and concentrations, produce a potential difference given by the Nernst equation. Our paper sensor consists of 2‐3 mm x 10 mm segments of paper with conducting silver paint contact patches on two ends. The paper is dipped in a buffer solution containing aptamers designed to bind to the capsid proteins on Zika. We then added the Zika (in its own buffer) to the region close to one of the silver‐paint contacts. The Zika virus (40 nm diameter with 43 kDa or 7.1x10‐20 gm weight) became immobilized in the paper’s pores and bonded with the resident aptamers creating a concentration gradient. Atomic force microscopy and Raman spectroscopy were carried out to verify that both the aptamer and Zika become immobilized in the paper. The potential measured between the two silver paint contacts reproducibly became more negative upon adding the Zika. We also showed that a Liquid Crystalline Display (LCD) powered by the sensor can be used to read the sensor output.

Highlights • UASB was proposed for RPMW anaerobic treatement under mesophilic conditions. • Start-up up of the UASB reactor was completed in the 24 days. • 80,76 % COD and 90 % TS were removed at an OLR of 7,27 g COD/L d. • At optimal OLR of 8.31 g COD/L d was required to produce 62.51 L/d biogas. • For HRT 15.14 h, after reactor start-up 80.63 % of COD was removed. • The average biogas composition was 72.98 % CH4, 19.76 % CO2, 0.9 % O2., The anaerobic digestion (AD) has become an alternative source and an attractive treatment method. Up-flow Anaerobic Sludge Blanket (UASB) digester has been designed to treat the Recycled paper mill wastewater (RPMW) in Morocco. This paper provides a research on anaerobic digestion of RPMW using UASB technology. The UASB digester was designed following the characterization of wastewater and the feed rate, with the volume of 70 liters. The UASB reactor treating the RPMW was operated for 130 days with minimal overload problems. The experiments were carried out in the mesophilic temperature (37 °C) at different organic loading rates (OLR). A daily analysis was performed to ensure the efficiency of the digester. In this study, the AD experiment was performed in continuous mode with an effluent inlet flow rate equal to 1 L/h. Using the optimal OLR value 5.18 g COD/Ld and with an effluent 5,7 g COD/L, a biogas yield of 92 N mL/g COD removed (at normal temperature and pressure) was obtained during the RPMW anaerobic treatment. The reactor was operated at an optimal hydraulic retention time (HRT) of 15.14 h with a biogas production volume of the optimal value 62.5 L/d. These results indicate that RPMW can be effectively treated in a UASB reactor with the advantage of producing biogas. We tested our system with RPMW, to see the production capacity of the UASB system, which the objective is to develop the system for the industrial scale.

Non-invasive diagnosis on biological liquid samples, such as urine, sweat, saliva, and tears, may allow patients to evaluate their health by themselves. To obtain accurate diagnostic results, target liquid must be precisely sampled. Conventionally, urine sampling using filter paper can be given as an example sampling, but differences in the paper structure can cause variations in sampling volume. This paper describes precise liquid sampling using synthetic microfluidic papers, which are composed of obliquely combined micropillars. Sampling volume accuracy was investigated using different designs and collection methods to determine the optimal design and sample collecting method. The optimized protocol was followed to accurately measure potassium concentration using synthetic microfluidic paper and a commercially available densitometer, which verified the usefulness of the synthetic microfluidic papers for precision sampling.

Following the fast spread of the coronavirus (Covid-19) across Europe and North America in March 2020, many people started stockpiling commodities like toilet paper. Despite the high relevance for public authorities to adequately address stockpiling behavior, empirical studies on the psychological underpinnings of toilet paper stockpiling are still scarce. In this study, we investigated the relation between personality traits, perceived threat of Covid-19, and stockpiling of toilet paper in an online survey (N = 996) across 22 countries. Results suggest that people who felt more threatened by Covid-19 stockpiled more toilet paper. Further, a predisposition towards Emotionality predicted the perceived threat of Covid-19 and affected stockpiling behavior indirectly. Finally, Conscientiousness was related to toilet paper stockpiling, such that individuals higher in Conscientiousness tended to stockpile more toilet paper. These results emphasize the importance of clear communication by public authorities acknowledging anxiety and, at the same time, transmitting a sense of control.

Rabies is a lethal zoonotic encephalomyelitis that causes an estimated 59,000 human deaths yearly worldwide. Although developing countries of Asia and Africa bear the heaviest burden, surveillance and disease detection in these countries is often hampered by the absence of local laboratories able to diagnose rabies and/or the difficulties of sample shipment from low-access areas to national reference laboratories. Filter papers offer a convenient cost-effective alternative for the sampling, shipment, and storage of biological materials for the diagnosis of many pathogens including rabies virus, yet the properties of diagnostic tests using this support have not been evaluated thoroughly. Sensitivity and specificity of molecular diagnosis of rabies infection using a reverse transcription followed by a hemi-nested polymerase chain reaction (RT-hn-PCR) either directly on brain tissue or using brain tissue dried on filter paper were assessed on 113 suspected field animal samples in comparison to the direct fluorescent antibody test (FAT) recommended by the World Health Organization as one of the reference tests for rabies diagnosis. Impact of the duration of the storage was also evaluated. The sensitivity and the specificity of RT-hn-PCR i) on brain tissue were 96.6% (95% CI: [88.1–99.6]) and 92.7% (95% CI: [82.4–98.0]) respectively and ii) on brain tissue dried on filter paper 100% (95% CI: [93.8–100.0]) and 90.9% (95% CI: [80.0–97.0]) respectively. No loss of sensitivity of RT-hn-PCR on samples of brain tissue dried on filter paper left 7 days at ambient temperature was detected indicating that this method would enable analyzing impregnated filter papers sent to the national reference laboratory at ambient temperature within a 1-week shipment time. It could therefore be an effective alternative to facilitate storage and shipment of samples from low-access areas to enhance and expand rabies surveillance., Author summary Dogs are responsible for 99% of human rabies deaths. Facilitating diagnostic of rabid dogs can help further identify i) people who were exposed to rabies in order to encourage them to seek post exposure prophylaxis and ii) other exposed animals to break the transmission chain (i.e. prevent them from further transmitting the virus to other people and animals). Yet, the reference diagnostic method for animal rabies requires brain samples to be collected post-mortem and shipped under temperature-controlled conditions. The shipping of such samples is complex in low-access areas, especially in low income countries, which are often those that bear the heaviest rabies burden. Filter papers offer a convenient alternative for biological sample shipment and storage. Here the efficiency of a molecular diagnostic method applied to brain tissue dried on filter paper is compared to one of the reference methods, the direct fluorescent antibody test. Our results show it has an excellent sensitivity (it does not miss any positive samples), even when filter papers are left 7 days at ambient temperature. These results let us foresee a cost-effective alternative facilitating shipment, storage and testing of samples from rabies suspected animals from low-access areas. This could considerably enhance and expand rabies surveillance in low-income countries, allowing a more comprehensive evaluation of rabies burden, and thus reinforcing arguments for allocating funds to rabies control policies.

This article presents experimental data for physical characteristics, fiber compositions, and tensile properties of non-flushable wipes, flushable wipes, and toilet papers. Samples included 42 flushable wipes, 16 non-flushable wipes, and 11 toilet papers that were collected from around the world by considering product diversity in their retail regions (e.g., north america, and europe), manufacturers (e.g., global, and regional), and function (e.g., baby, toddler, patient, adult, and feminine wipes). The data were generated in accordance with relevant standard methods of International Organization for Standardization (ISO). The data are provided here in full (not hosted by any public repository) in association with the research article: "Physical characteristics, fiber compositions, and tensile properties of nonwoven wipes and toilet papers in relevance to what is flushable" [1]. Readers are referred to the research article for discussions and interpretations of the data presented in this document. (C) 2019 The Author(s). Published by Elsevier Inc.

Aim. To evaluate in vitro the antibacterial effect of a paper made of silver phosphate cellulose fibers (SPCF) on Staphylococcus aureus, the most common diabetic foot ulceration (DFU) pathogen when compared with other common commercial products. Methods. The antibacterial activity of SPCF samples was evaluated through time with cell counting on agar plates. SPCF samples were then compared with commercial wound care products currently in use in DFU treatments (Silvercel™, Acticoat 7, and Aquacel Ag ExtraTM) through time on agar plates (growth inhibition zones). Results. After 6 hours, there was no viable bacterial cell detected on either plate (p<0.05). There was a net growth inhibition zone for SPCF samples but no significant difference between the two silver concentrations. Compared with common commercial products, SPCF paper provides results equal to Acticoat 7 (p<0.05) and superior to Aquacel AG ExtraTM and Silvercel™ at lower silver concentrations (p<0.001). Conclusions. These results have shown the efficiency of SPCF paper to eliminate Staphylococcus aureus in these conditions. SPCF papers are effective when compared with other common commercial products and could have an industrial potential in wound care. Infected DFU could benefit from the antibacterial effectiveness of SPCF, but more relevant experimentations related to foot ulcers are needed.

In this White Paper, we discuss the current state of microbial cancer therapy. This paper resulted from a meeting (‘Microbial Based Cancer Therapy’) at the US National Cancer Institute in the summer of 2017. Here, we define ‘Microbial Therapy’ to include both oncolytic viral therapy and bacterial anticancer therapy. Both of these fields exploit tumor-specific infectious microbes to treat cancer, have similar mechanisms of action, and are facing similar challenges to commercialization. We designed this paper to nucleate this growing field of microbial therapeutics and increase interactions between researchers in it and related fields. The authors of this paper include many primary researchers in this field. In this paper, we discuss the potential, status and opportunities for microbial therapy as well as strategies attempted to date and important questions that need to be addressed. The main areas that we think will have the greatest impact are immune stimulation, control of efficacy, control of delivery, and safety. There is much excitement about the potential of this field to treat currently intractable cancer. Much of the potential exists because these therapies utilize unique mechanisms of action, difficult to achieve with other biological or small molecule drugs. By better understanding and controlling these mechanisms, we will create new therapies that will become integral components of cancer care.

Background Biochars are the new generation of sustainable soil amendments which may be applied both to fertilize and remediate the impacted soils. The aim of current research has been synthesis and characterization of pulp and paper-derived biochars and determination of their mechanisms in simultaneous immobilization of heavy metals (Cu2+, Pb2+, and Zn2+) within contaminated soil. In a novel attempt, three different solid wastes of Mazandaran Wood and Paper Industries (barks and effluent sludge) were utilized to produce biochars. Methods The thermogravimetric behavior of the three selected biomasses were initially analyzed and the proper pyrolysis condition has been determined, accordingly. Alterations in surface active groups, before and after the pyrolysis process, have been detected by Fourier transform infrared (FTIR) spectroscopy. Elemental analysis and acid digestion procedure have been employed to measure C, H, N, S, O, and P contents of the biochars. Moreover, porosity and morphological characteristics have been monitored by Brauner-Emmet-Teller (BET) porosimetry and scanning electron microscopy (SEM). Batch adsorption tests have been designed and carried out. Finally, a set of soil sequential extraction experiments was performed over both amended/unamended soils which together with a post-sorption FTIR analysis, explained the possible competitive immobilization mechanism. Results Porosimetry study indicated the nanoporosity of the chars and the distribution pattern of adsorbed metals over the char samples. Batch sorption tests suggested remarkable uptake capacity for each char. The results of post sorption tests suggested that Cu is mainly involved in organic bonds of -NH2, -OH and -COOH groups, Pb forms insoluble hydroxide, phosphate or carbonate precipitates, and Zn is mostly engaged in the residual fraction. Conclusions Accordingly, the bulky wastes are confirmed to have the potential to form sustainable biochar soil amendments.

BACKGROUND: The partograph has been endorsed by World Health Organization (WHO) since 1994 which presents an algorithm for assessing maternal and foetal conditions and labor progression. Monitoring labour with a partograph can reduce adverse pregnancy outcomes such as prolonged labor, emergency C-sections, birth asphyxia and stillbirths. However, partograph use is still very low, particularly in low and middle income countries (LMICs). In Bangladesh the reported partograph user rate varies from 1.4% to 33.0%. Recently, an electronic version of the partograph, with the provision of online data entry and user aid for emergency clinical support, has been tested successfully in different settings. With this proven evidence, we conducted and operations research to test the feasibility and effectiveness of implementing an e-partograph, for the first time, in 2 public hospitals in Bangladesh.METHODS: We followed a prospective crossover design. Two secondary level referral hospitals, Jessore and Kushtia District Hospital (DH) were the study sites. All pregnant women who delivered in the study hospitals were the study participants. All nurse-midwives working in the labor ward of study hospitals were trained on appropriate use of both types of partograph along with standard labour management guidelines. Collected quantitative data was analyzed using SPSS 23 statistical software. Discrete variables were expressed as percentages and presented as frequency distribution and cross tabulations. Chi square tests were employed to test the association between exposure and outcome variables. Potential confounding factors were adjusted using multivariate binary logistic regression methods. Ethical approval was obtained from the institutional review board of the International Centre for Diarrheal Disease Research, Bangladesh (icddr,b).FINDINGS: In total 2918 deliveries were conducted at Jessore DH and 2312 at Kushtia DH during one-year study period. Of them, 1012 (506 in each facility) deliveries were monitored using partograph (paper or electronic). The trends of facility based C-section rates was downwards in both the hospitals; 43% to 37% in Jessore and from 36% to 25% in Kushtia Hospital. There was a significant reduction of prolonged labour with e-partograph use. In Kushtia DH, the prolonged labour rate was 42% during phase 1 with the paper version which came down to 29% during phase-2 with the e-partograph use. The similar result was observed in Jessore DH where the prolonged labour rate reduced to 7% with paper partograph from the reported 30% prolonged labour with e-partograph. The e-partograph user rate was higher than the paper partograph during both phases (phase 1: 3.31, CI: 2.04-5.38, p < .001 and in phase 2: 15.20 CI: 6.36-36.33, p < .001) after adjusting for maternal age, parity, gestational age, religion, mother's education, husband's education, and fetal sex.CONCLUSION: The partograph user rate has significantly improved with the e- partograph and was associated with an overall reduction in cesarean births. Use of the e-partograph was also associated with reduced rates of prolonged labour. This study has added to the growing body of evidence on the positive impact of e-partograph use. We recommend implementing e-partograph intervention at scale in both public and private hospitals in Bangladesh.TRIAL REGISTRATION: ClinicalTrials.gov NCT03509103.

Social interactions have large effects on individual physiology and fitness. In the immediate sense, social stimuli are often highly salient and engaging. Over longer time scales, competitive interactions often lead to distinct social ranks and differences in physiology and behavior. Understanding how initial responses lead to longer-term effects of social interactions requires examining the changes in responses over time. Here we examined the effects of social interactions on transcriptomic signatures at two times, at the end of a 45-minute interaction and 4 hours later, in female Polistes fuscatus paper wasp foundresses. Female P. fuscatus have variable facial patterns that are used for visual individual recognition, so we separately examined the transcriptional dynamics in the optic lobe and the non-visual brain. Results demonstrate much stronger transcriptional responses to social interactions in the non-visual brain compared to the optic lobe. Differentially regulated genes in response to social interactions are enriched for memory-related transcripts. Comparisons between winners and losers of the encounters revealed similar overall transcriptional profiles at the end of an interaction, which significantly diverged over the course of 4 hours, with losers showing changes in expression levels of genes associated with aggression and reproduction in paper wasps. On nests, subordinate foundresses are less aggressive, do more foraging and lay fewer eggs compared to dominant foundresses and we find losers shift expression of many genes in the non-visual brain, including vitellogenin, related to aggression, worker behavior, and reproduction within hours of losing an encounter. These results highlight the early neurogenomic changes that likely contribute to behavioral and physiological effects of social status changes in a social insect., Author summary Aggressive interactions often create inequalities–some individuals win while others lose. Winning versus losing can lead to large physiological differences between individuals, including different neurogenomic profiles between winners and losers. How this information about contest outcome leads to distinct neurogenomic profiles is poorly understood. Here we examine gene expression in response to aggressive social encounters in paper wasps, which naturally form dominance hierarchies on their nests in the wild. Shortly following encounters winners and losers have similar expression profiles, likely because similar mechanisms are engaged by social experiences. Four hours later, we find divergent neurogenomic profiles between winners and losers, with losers showing larger shifts in expression compared to winners. Many of the most dynamically expressed genes have been previously associated with dominance and caste differences in paper wasps showing how a single interaction can engage many of the same genomic networks that are involved in mediating more dramatic differences in queen-worker behavioral differences are also involved in responses shortly following social interactions.

BACKGROUND: Two common techniques used in canteen hygiene supervision, are the coliform paper assay, which is the standard method, and the adenosine triphosphate (ATP) bioluminescence method. The coliform paper assay requires the incubation of the sample, which is time-consuming and does not provide a real-time assessment. Meanwhile, the ATP bioluminescence assay can provide real-time kitchenware cleanliness data. OBJECTIVE: This study aimed to compare these two methods for evaluating the sanitary condition of kitchenware and explore whether the ATP bioluminescence assay can be used as a standard method in sanitary inspection. METHODS: In this study, the cluster random sampling method was used to sample kitchenware from six canteens in the Hebei province, China. Samples were, assessed through the coliform paper test and ATP bioluminescence assay. RESULTS: Kitchenware negative rates for the coliform paper method and the ATP test were 64.39% and 49.07%, respectively. The Escherichia coli positive detection rate grew steadily as the relative light units (RLU) value for the ATP technique increased. The kappa coefficient for the two methods was 0.549, indicating that the two methods yield relatively consistent results. CONCLUSION: Although currently not considered a standard method, simply using ATP detection is advantageous for quick on-site detection in catering unit hygiene supervision.

Fluorescence is well-known nowadays as one of the most efficient anti-counterfeiting techniques. Zinc oxide quantum dots (ZnOQds) are exceptionally fluorescence when exposed to ultraviolet (UV) light, which makes them a candidate for anti-counterfeiting printing. The resulting anti-counterfeiting papers are sustainable and resistance against organic dyes. In this work, ZnOQds were prepared via a green method and characterized under UV–visible spectroscopy, along with microscopic observations by transmission electron microscopy (TEM) and crystallography by X-ray diffraction (XRD). Formation of ZnOQds nanocrystals with an average partials size of 7.3 nm was approved. Additionally, double-layers sheets were prepared at two loading concentrations of ZnOQds, namely 0.5 and 1 (wt./v) and underwent characterization using a topographical surface study via field emission scanning electron microscopy (FE-SEM). Hybrid sheets were mechanically more stable compared to single-layer paper and likewise polymer film. Moreover, aging simulation approved a high stability for hybrid sheets. Particularly, the photoluminescence emission affirmed anti-aging character of hybrid paper for more than 25 years. The hybrid sheets also showed a broad range of antimicrobial activity.