Search

Abstract African countries are in a unique position to reap the socio-economic and environmental benefits of renewable resources as a means for meeting increasing energy demand in a sustainable way. A critical obstacle for the deployment of renewable energy technologies in Africa is the difficulty of attracting sufficient and affordable finance. This paper compares the impact of financial conditions on the cost of electricity generation across six renewable and three fossil-based technologies in 46 African countries. The results show large cost variations and highlight the extent to which renewables are disadvantaged by current financial practices. The energy-economy-environment model TIAM-ECN is used to show how lowering financing costs results in a much higher deployment of renewables. For example, solar PV could account for 10–15% of total electricity generation by 2050, even without explicit climate policy, thanks to financial de-risking programmes. The results demonstrate that changes in financing schemes could outweigh the impact of technology learning. This paper also demonstrates that, once ambitious climate policies are in place, reducing financing costs for renewables could be an efficient way to lower greenhouse gas emissions. Financial de-risking is thus a key ingredient for unlocking the renewable energy potential in Africa. Highlights • We show how renewables are disadvantaged by today's financial practices in Africa. • We show how lower financing costs result in a higher deployment of renewables. • PV can account for 10–15% of electricity generation by 2050 without climate policy. • Changes in financing schemes could outweigh the impact of technology learning. • Financial de-risking is key for unlocking the renewable energy potential in Africa. [ABSTRACT FROM AUTHOR]

This paper evaluates the net effect of renewable energy policy in Spain from 2002 to 2017 and calculates its cost-effectiveness in terms of CO 2 emission reductions in the production of electricity. Our conclusions indicate that although the phasing out of Feed-in Tariffs reduced the regulatory costs, it also limited renewable participation in the electricity market, leading to an increased electricity price and higher emissions. According to our results, the joint effect of (i) the value of avoided emissions due to renewable energy participation and (ii) the merit order effect was able to compensate for the regulatory costs (subsidies) up until 2010, while the sign of the net effect was reversed from 2011 to 2017. Finally, we find that the economic implications of emission reductions are highly dependent on how the social cost of carbon is measured. [ABSTRACT FROM AUTHOR]

Climate change is the greatest challenge of our time for development. Adaptation to this change combined with the reduction of greenhouse gas emissions can help to boost the economic transformation which stimulates growth, fills the energy gap and reduces poverty. This paper focuses on the potential of renewable energy sources (RES) for electricity generation in Madagascar which is a lower-income country. A large accessibility to electricity could be a driving force for the economic development of this fourth worldwide Island. The Electricity mix is currently heavily dependent to fossil fuel imports. Indeed, most of the electric demands are fulfilled by diesel power plants. An overview of the power situation and renewable energy potential of Madagascar is first presented, then different scenarios for the evolution its electricity mix are proposed. [ABSTRACT FROM AUTHOR]

Electricity is the basic tool that drives industrialization, technological advancement, engineering transformation and economic growth all over the world. The situation of Nigeria's electricity power sector is one that has defied virtually every effort made to resurrect it from its state of dilapidation. A major concern is “can there ever be stable and cost effective electricity in Nigeria?” The authors are positive this can be realised, but not without considering other forms of electricity energy resources available in Nigeria other than the conventional sources of electricity which is currently the mainstay. A deliberate transition from conventional sources of electricity energy to renewable and environmental friendly sources is critical for national development, even though recent development show the Nigerian government is backsliding in adopting renewable energy technologies. This paper will be used to highlight the different sources of renewable energy which is critical to solve the lingering problem of electricity generation in Nigeria. Hence, based on the literature, modeled scenarios and field experience, the authors discovered it is much easier for individuals to drive this transition to 100% renewable energy than to continue to depend on government forever. [ABSTRACT FROM AUTHOR]

A central strategy for climate change mitigation is expanding electricity generation from renewable energy sources, with an increasing share of decentralized generation. Some of these sources are variable renewable energy (VRE) sources, such as wind and solar resources. Measures have to be enacted to integrate VRE into an existing power supply system. One approach is switching from grid electricity supply towards direct demand of VRE generation to reduce grid transportation requirements and variable electricity grid feed-in. Within this context, energy flexibility control of manufacturing systems can be used to match energy demand of manufacturing systems with on-site VRE generation. Nonetheless, due to their inherent dynamic behavior, interlinked manufacturing systems provide additional operational and technical challenges such as maintaining throughput when energy control actions are executed. Further, stochastic influences from, for example, VRE generation and manufacturing system behavior constitute the requirement for a real-time approach on the level of manufacturing execution systems. Consequently, this paper presents a method for real-time control of manufacturing systems with several processes and intermediate buffers to increase utilization of (on-site) generated VRE without compromising system throughput. An initial method for an energy flexibility control logic is presented and a simulation prototype to evaluate its effectiveness is implemented. A case study is used to demonstrate the effectiveness and to test sensitivities to system parameter changes. Impact on direct VRE demand and additional operational indicators is evaluated. [ABSTRACT FROM AUTHOR]

Abstract: This paper is concerned with modeling possible future paths for Lebanon’s electricity future and evaluating them. The baseline scenario (BS) reflects the business-as-usual state of affairs and thus describes the most likely evolution of the power sector in the absence of any climate change-related or other policies. Two alternative scenarios are examined in contrast to the BS; the renewable energy scenario (RES) and the natural gas scenario (NGS). Using the Long range Energy Alternatives Planning System (LEAP) software we conduct a full-fledged scenario analysis and examine the technical, economic, and environmental implications of all scenarios. From an economic standpoint as well as from an environmental perspective both alternative scenarios are superior to the baseline. Hence, the results of the simulation show that the alternative scenarios are more environmentally and economically attractive than the BS. They would help Lebanon meet its social, environmental, and economic development goals, while at the same time providing other unquantifiable benefits that are discussed further in the paper. Anticipated barriers to the shift in energy mix from conventional sources to renewable energy sources are also presented and discussed [Copyright &y& Elsevier]

Abstract: The utilisation of renewable energy resources for power generation is extremely important for Ireland due to the lack of indigenous fossil fuel resources. A micro-wind turbine is by far the most commonly used grid-connected micro-renewable electricity generation system for domestic applications in Ireland, followed by solar PV. Unfortunately, neither a single micro-wind turbine nor a single solar PV system can provide a continuous power supply due to variations in weather and climate conditions. The coupling of these two systems however can improve the power supply reliability by using the complementary characteristics of wind and solar energy. In this paper, a micro-renewable electricity-generation-system integration technique, tailored for applications in Ireland but generally applicable, is presented. Net present value is the parameter used to identify the optimal system. The optimal system can be a mono system, formed from a single micro-wind turbine or a single solar PV system, or a hybrid system formed from a combination of both. A renewable energy requirement is a constraint used in the integration to eliminate systems that cannot provide sufficient energy from renewable energy resources. The integration technique is applied to find the optimal system, under current Irish conditions, that can be formed from six sample micro-wind turbines and/or solar PV systems assembled from three sample solar PV modules. The analyses show that, with a 50% renewable energy requirement, the optimal system is a mono system containing a 2.4 kW micro-wind turbine; however, critically, the system is not economically viable. Four parameter studies assessing the effect of household electrical load, imported electricity price, exported electricity tariff and wind speed have also been conducted. From these studies it is seen that the most effective way to improve the financial performance of all systems is to offer a higher exported electricity tariff; installing a mono/hybrid system containing a micro-wind turbine in a location with a good wind resource can also have a significant effect. [Copyright &y& Elsevier]

Abstract: Solar energy is the most promising source of clean, renewable energy and it has the greatest potential of any power source to solve the world''s energy problems. However, the problem, is how best to harness this vast amount of solar energy. Nevertheless, even if highly efficient Concentrating Solar Power (CSP) could be made cheaply, there would be considerable change in solar power. This technology is expected to be more efficient and to achieve a manufacturing cost of less than $1/W near future. This paper reviews and elaborates the methodology utilized to design and fabricate the solar dish concentrator and outlines the parameters that can be used to increase the efficiency of solar fraction in parabolic dish concentrator under wet climate environment in Malaysia. The study finally provides ideas to the continually increasing ability of these technologies to concentrate and harness solar energy for electricity production and thus eliminate the growing concern over climate change and how it will hurt the region''s environment, human health and economy. [Copyright &y& Elsevier]

Abstract: In recent years, the threat of global climate change, high fuel import dependence, and rapidly rising electricity demand levels have intensified the quest for more sustainable energy systems. This in turn has increased the need for policy makers to promote electricity generation from renewable energy sources. Guaranteed prices coupled with a buy-back obligation for electricity fed into the grid is a popular renewables promotion instrument, especially in Europe. More recently, driven mainly by electricity market liberalisation efforts, quota targets for the share of renewables in combination with tradable ‘green’ certificates (TGC) have received considerable attention. TGC offer a greater theoretical potential for economic efficiency gains, due to price competition and the greater flexibility assigned to the obliged parties. While guaranteed prices and TGC schemes support the operation of renewable energy technology systems, bidding schemes for renewable energy generation capacity are used to raise economic efficiency on the plant construction side. All of these policy instruments suffer from the shortcoming that they do not explicitly account for the often widely varying environmental, social and economic impacts of the technologies concerned. In this paper, we propose a methodology for the design of renewable energy policy instruments that is based on integrated assessment. In particular, we argue that using participatory multicriteria evaluation as part of the design of renewable energy promotion policies would make it possible: (1) to differentiate the level of promotion in a systematic and transparent manner according to their socio-ecological economic impact, and (2) to explicitly account for the preferences of stakeholders. A further problem of existing TGC and bidding schemes is that diversity of supply could be severely diminished, if few low-cost technologies were allowed to dominate the renewable energy market. To ensure a certain diversity of technologies, our scheme suggests the use of different technology bands for technologies that are relatively homogeneous with respect to their maturity. [Copyright &y& Elsevier]

As the nuclear industry arrives at a crossroads, this paper looks atBNFL's nuclear future. It does this by addressing two key issues: the energy balance and regulation. The first issue takes in the problems of climate change and renewables, and the nuclear contribution. Thesecond issue raises the possibility that, although safety is the toppriority for BNFL, the cost of regulation may be becoming disproportionate to the advantages gained. The paper concludes that the balancing act between energy supply and CO2 reduction can only beachieved successfully if nuclear is a significant part of the equation. [ABSTRACT FROM AUTHOR]