Search

The most commonly used real-time augmentation services in China are the International GNSS Service's (IGS) real-time service (RTS), PPP-B2b service, and Double-Frequency Multi-Constellation (DFMC) service of the BeiDou Satellite-Based Augmentation System (BDSBAS) service. However, research on the performance evaluation, comparison, and application scope of these three products is still incomplete. This article introduces methods for obtaining real-time augmentation information and real-time orbit and clock offset recovery. Based on real-time orbit and clock offset accuracy, positioning accuracy, and positioning availability, this article systematically evaluates the performance and analyzes the application fields of Centre National d'Études Spatiales (CNES), PPP-B2b, and BDSBAS augmentation information. The results of the evaluation revealed that the radial accuracy of the CNES and PPP-B2b real-time orbit product is consistent, and the Root Mean Square (RMS) is better than 5 cm. The CNES real-time orbit product can achieve centimeter-level accuracy in both along-track and cross-track components, surpassing PPP-B2b's decimeter-level accuracy. Both services demonstrate consistent accuracy in the real-time clock offset, with PPP-B2b showing similar standard deviations (STDs) of 0.16 ns for different satellites. However, for CNES, the STD of the real-time clock offset varies, with values of 0.10 ns, 0.19 ns, and 0.60 ns, respectively, for GPS, BDS-3 Medium Earth Orbit (MEO), and BDS-3 Inclined Geosynchronous Satellite Orbit (IGSO) satellites. Centimeter-level accuracy is achieved after convergence and positioning availability exceeds 99% for CNES and PPP-B2b services. Therefore, the difference between the two services in application areas depends on the acquisition of augmentation information. However, BDSBAS, which concentrates on code observations, demonstrates inferior performance in real-time orbit, clock offset, positioning accuracy, and positioning availability when compared to the other two services. Its primary application is in the aviation and maritime domains, where there is a greater need for service integrity, continuity, and reliability. [ABSTRACT FROM AUTHOR]

Introducing precise atmosphere information into precise point positioning enables rapid ambiguity resolution and introduces a significant accuracy improvement. However, it can only be implemented in regions with dense networks and stable communication links. For larger areas, e.g., an intercontinental level, there is a conflict between the accuracy of corrections and the amount of atmosphere information to be disseminated. We develop a hierarchical augmentation mode to combine the advantages of the fitting model and region interpolation model to relieve the communication burden. Relying on the fitting model with fewer coefficients applied over large areas as the essential information, the unmodeled errors are calculated at each reference station, and further correction information is optional compensation depending on the magnitude of the unmodeled residuals. We perform the proposed models on 103 EUREF Permanent Network stations with 200-km station spacing and 84 stations as the external validation. The ionosphere and troposphere fitting models have an average accuracy of about 4.2 and 1.3 cm, respectively, under meteorologically calm conditions. The unmodeled error transmission determined by the magnitude of residuals can be reduced by 61% and 96% for the ionospheric and tropospheric delays, respectively, with respect to the legacy interpolation mode. Further compensation implemented, i.e., unmodeled residuals, can achieve instantaneous convergence for 83.6% of all solutions, and the overall initialization time is within 1.0 min. Thus, the proposed hierarchical positioning mode satisfies real-time positioning convergence requirements and significantly reduces massive corrections in communication. [ABSTRACT FROM AUTHOR]

Real-time satellite clock offset is a crucial element for real-time precise point positioning (RT-PPP). However, the elapsed time for undifferenced (UD) multi-global navigation satellite system (GNSS) real-time satellite clock offset estimation at each epoch is increased with the growth of stations, which may fall short of real-time application requirements. Therefore, a rapid estimation method for UD multi-GNSS real-time satellite clock offset is proposed to improve the computation efficiency, in which both the dimension of the normal equation (NEQ) and the number of redundant observations are calculated before adjustment; if these two values are larger than the predefined thresholds, the elevation mask is gradually increased until they are less than the predefined thresholds. Then, the clock offset estimation is conducted; this method is called clock offset estimation using partial observations. Totals of 50, 60, 70 and 80 stations are applied to perform experiments. Compared to clock offset estimation using all observations, the elapsed times of clock offset estimation using partial observations can be reduced from 6.80 to 3.10 s, 7.93 to 2.97 s, 12.04 to 3.14 s for 60, 70 and 80 stations, respectively. By using the proposed method, the elapsed time of the clock offset estimation at each epoch is less than 5 s. The estimated clock offset accuracy for GPS, BDS-3, Galileo and GLONASS satellites are better than 0.04, 0.05, 0.03 and 0.16 ns when using the partial observations to estimate clock offset with 50, 60, 70 and 80 stations, respectively. For the multi-GNSS kinematic PPP using the estimated clock offset from 50, 60, 70 and 80 stations with partial observations, the positioning accuracy at 95% confidence level in the east, north and up direction are better than 2.70, 2.20 and 5.60 cm, respectively. [ABSTRACT FROM AUTHOR]