Search

Abstract The insulators of overhead power lines play a crucial role in maintaining the reliability of transmission and distribution networks. Because they are exposed to harsh and dynamic environmental conditions, it is essential to investigate the impact of environmental parameters such as pollution, inclined angle with the cross arm, and temperature on the dielectric performance of the insulators of overhead lines. Conventionally, the effect of such parameters can be investigated through experimental measurements of the insulator flashover voltage. However, this approach is costly and time-consuming and calls for the isolation of the lines to conduct the test, causing interruption to the entire grid. As such, there is an essential need to develop a new methodology to quantify the flashover voltage of overhead insulators operating under various environmental conditions, which is the main aim of this paper. The Central Composite Design is employed to develop a mathematical correlation between the insulator flash over voltage as a dependent variable and three environmental parameters: pollution level, inclined angle, and temperature as independent variables. The robustness of the developed equation is validated through extensive experimental measurements of the insulator’s flash overvoltage under various conditions. Results reveal a good agreement between the actual and predicted flashover voltage using the developed correlation, as the absolute error for all investigated samples is less than 6%.

Health index is an essential tool to evaluate the condition of power transformers. Generally, there are two methodologies to evaluate the health index of power transformers: conventional methods and machine learning-based approaches. The main challenge in employing the health index to assess transformer’s condition is the lack of supporting data, which hinders its ability to accurately reflect the actual health condition of the transformers. While several studies on estimating the transformers health index using machine learning techniques can be found in the literatures, not much attention was given to the cumulative impact of multiple data unavailability on the calculation’s accuracy. This paper presents a comprehensive analysis of health index predictions using two machine learning methods: specifically, regression and classification against conventional methods of weighting and scoring. Furthermore, the paper presents some strategies to overcome the unavailability of multiple data. Six methods are presented and evaluated across 15 missing data scenarios to assess their effectiveness compared with scenarios featuring complete data. Results reveal that Gradient Boosting Regression has the most accurate accuracy in predicting the health index with a 95%, assuming complete data, and 97.87% considering data unavailability. The paper also presents an economic analysis to highlight the profitability associated with predicting missing data compared with the certainty level and evaluation using asset owner interpretation to assess the feasibility of the proposed method. The main contribution of the paper is the presentation of a comprehensive view for asset owners to make informed decisions in case of data unavailability.

Reliable operation of oil-immersed power transformers is crucial for electrical transmission and distribution networks. However, the aging of high voltage assets including power transformers along with the increasing of load demand have heightened the importance of adopting cost-effective asset management strategies. Dissolved gas analysis (DGA) has been recognized as a valuable diagnostic tool for detecting potential faults and monitoring the condition of oil-immersed power transformers. Traditional offline DGA method involves periodic sampling and laboratory analysis, which often results in delayed detection and response to emerging faults. To address these limitations, online DGA approach has been emerged to provide real-time monitoring and continuous data acquisition. This paper presents a new asset management approach for mineral oil-immersed power transformers by analysing the online DGA data using convolutional neural networks. The proposed approach provides real time solutions to classify emerging fault type and predict transformer health deterioration level with high accuracy. Results show that the accuracy of fault diagnostics of the proposed approach is approximately 87%.

The accuracy of voltage transformer (VT) measurements is imperative for the security and reliability of power systems and the equitability of energy transactions. The integration of a substantial number of electric vehicles (EVs) and their charging infrastructures into the grid poses new challenges for VT measurement fidelity, including voltage instabilities and harmonic disruptions. This paper introduces an innovative transformer measurement error prediction model that synthesizes Multivariate Variational Mode Decomposition (MVMD) with a deep learning framework integrating Bidirectional Temporal Convolutional Network and Multi-Head Attention mechanism (BiTCN-MHA). The paper is aimed at enhancing VT measurement accuracy under fluctuating load conditions. Initially, the optimization of parameter selection within the MVMD algorithm enhances the accuracy and interpretability of bi-channel signal decomposition. Subsequently, the model applies the Spearman rank correlation coefficient to extract dominant modal components from both the decomposed load and original ratio error sequences to form the basis for input signal channels in the BiTCN-MHA model. By superimposing predictive components, an effective prediction of future VT measurement error trends can be achieved. This comprehensive approach, accounting for input load correlations and temporal dynamics, facilitates robust predictions of future VT measurement error trends. Computational example analysis of empirical operational VT data shows that, compared to before decomposition, the proposed method reduces the Root-Mean-Square Error (RMSE) by 17.9% and the Mean Absolute Error (MAE) by 23.2%, confirming the method’s robustness and superiority in accurately forecasting VT measurement error trends.

Peer-to-peer (P2P) energy trading has attracted a lot of attention and the number of electric vehicles (EVs) has increased in the past couple of years. Toward sustainable mobility, EVs meet the standard development goals (SDGs) for attaining a sustainable future in the transport sector. This development and increasing number of EVs creates an opportunity for prosumers to trade electricity. Considering this opportunity, this review article aims to provide an in-depth analysis of P2P energy trading of EVs using blockchain in centralized and decentralized networks, which enables prosumers to exchange energy directly with one another. The paper is aimed to provide the reader with a state-of-the-art review on the P2P energy trading for EVs, considering different blockchain algorithms that are practically implemented or still in the research phase. Moreover, the paper presents blockchain applications, current trends, and future challenges of EVs’ energy trading. P2P energy trading for EVs using blockchain algorithms can be successfully implemented considering real-time scenarios and economically benefits smart sustainable societies.

Accurate short-term load forecasting (STLF) is essential for power grid systems to ensure reliability, security and cost efficiency. Thanks to advanced smart sensor technologies, time-series data related to power load can be captured for STLF. Recent research shows that deep neural networks (DNNs) are capable of achieving accurate STLP since they are effective in predicting nonlinear and complicated time-series data. To perform STLP, existing DNNs use time-varying dynamics of either past load consumption or past power correlated features such as weather, meteorology or date. However, the existing DNN approaches do not use the time-invariant features of users, such as building spaces, ages, isolation material, number of building floors or building purposes, to enhance STLF. In fact, those time-invariant features are correlated to user load consumption. Integrating time-invariant features enhances STLF. In this paper, a fuzzy clustering-based DNN is proposed by using both time-varying and time-invariant features to perform STLF. The fuzzy clustering first groups users with similar time-invariant behaviours. DNN models are then developed using past time-varying features. Since the time-invariant features have already been learned by the fuzzy clustering, the DNN model does not need to learn the time-invariant features; therefore, a simpler DNN model can be generated. In addition, the DNN model only learns the time-varying features of users in the same cluster; a more effective learning can be performed by the DNN and more accurate predictions can be achieved. The performance of the proposed fuzzy clustering-based DNN is evaluated by performing STLF, where both time-varying features and time-invariant features are included. Experimental results show that the proposed fuzzy clustering-based DNN outperforms the commonly used long short-term memory networks and convolution neural networks.

The accuracy of voltage transformer (VT) measurements is imperative for the security and reliability of power systems and the equitability of energy transactions. The integration of a substantial number of electric vehicles (EVs) and their charging infrastructures into the grid poses new challenges for VT measurement fidelity, including voltage instabilities and harmonic disruptions. This paper introduces an innovative transformer measurement error prediction model that synthesizes Multivariate Variational Mode Decomposition (MVMD) with a deep learning framework integrating Bidirectional Temporal Convolutional Network and Multi-Head Attention mechanism (BiTCN-MHA). The paper is aimed at enhancing VT measurement accuracy under fluctuating load conditions. Initially, the optimization of parameter selection within the MVMD algorithm enhances the accuracy and interpretability of bi-channel signal decomposition. Subsequently, the model applies the Spearman rank correlation coefficient to extract dominant modal components from both the decomposed load and original ratio error sequences to form the basis for input signal channels in the BiTCN-MHA model. By superimposing predictive components, an effective prediction of future VT measurement error trends can be achieved. This comprehensive approach, accounting for input load correlations and temporal dynamics, facilitates robust predictions of future VT measurement error trends. Computational example analysis of empirical operational VT data shows that, compared to before decomposition, the proposed method reduces the Root-Mean-Square Error (RMSE) by 17.9% and the Mean Absolute Error (MAE) by 23.2%, confirming the method's robustness and superiority in accurately forecasting VT measurement error trends. [ABSTRACT FROM AUTHOR]

The insulators of overhead power lines play a crucial role in maintaining the reliability of transmission and distribution networks. Because they are exposed to harsh and dynamic environmental conditions, it is essential to investigate the impact of environmental parameters such as pollution, inclined angle with the cross arm, and temperature on the dielectric performance of the insulators of overhead lines. Conventionally, the effect of such parameters can be investigated through experimental measurements of the insulator flashover voltage. However, this approach is costly and time-consuming and calls for the isolation of the lines to conduct the test, causing interruption to the entire grid. As such, there is an essential need to develop a new methodology to quantify the flashover voltage of overhead insulators operating under various environmental conditions, which is the main aim of this paper. The Central Composite Design is employed to develop a mathematical correlation between the insulator flash over voltage as a dependent variable and three environmental parameters: pollution level, inclined angle, and temperature as independent variables. The robustness of the developed equation is validated through extensive experimental measurements of the insulator's flash overvoltage under various conditions. Results reveal a good agreement between the actual and predicted flashover voltage using the developed correlation, as the absolute error for all investigated samples is less than 6%., (© 2024. The Author(s).)