Search

Symmetric Multi-Processing (SMP) based on cache coherency is crucial for high-end embedded systems like automotive applications. RISC-V is gaining traction, and open-source hardware (OSH) platforms offer solutions to issues such as IP costs and vendor dependency. Existing multi-core cache-coherent RISC-V platforms are complex and not efficient for small embedded core clusters. We propose an open-source SystemVerilog implementation of a lightweight snoop-based cache-coherent cluster of Linux-capable CVA6 cores. Our design uses the MOESI protocol via the Arm's AMBA ACE protocol. Evaluated with Splash-3 benchmarks, our solution shows up to 32.87% faster performance in a dual-core setup and an average improvement of 15.8% over OpenPiton. Synthesized using GF 22nm FDSOI technology, the Cache Coherency Unit occupies only 1.6% of the system area., Comment: 4 pages, 4 figures, DSD2024 and SEAA2024 Works in Progress Session AUG 2024; Updated the acknowledgments

Multi-core vector processor architectures excel in handling computationally intensive vectorizable tasks but struggle to achieve optimal resource utilization when facing sequential and control tasks that cannot be vectorized. This work presents Spatzformer, the first reconfigurable RISC-V V (RVV) architecture developed from a baseline open-source dual-core cluster based on Snitch scalar cores augmented with compact Spatz vector units. Spatzformer operates in two distinct modes: split mode, working as a dual-core vector architecture to handle vectorizable tasks concurrently, and merge mode, where two vector units are driven by a single scalar core, allowing the remaining scalar core to handle non-vectorizable control tasks. We implement Spatzformer in a 12-nm technology node and characterize the cost of the added architectural reconfigurability. We show that merge mode accelerates mixed scalar-vector kernels by up to 1.8x compared to split mode. Moreover, it accelerates the vector kernels that require fine-grained synchronization (such as FFT) by up to 20% with respect to the baseline. The reconfigurability features do not degrade the architecture's maximum frequency (1.2GHz, TT, 0.8V, 25C) and have a negligible area impact (+1.4%), with a worst-case energy efficiency drop of only 7% with respect to the non-reconfigurable baseline., Comment: To be published in the 2024 IEEE 35th International Conference on Application Specific Systems (ASAP), Architectures and Processors

We present Occamy, a 432-core RISC-V dual-chiplet 2.5D system for efficient sparse linear algebra and stencil computations on FP64 and narrow (32-, 16-, 8-bit) SIMD FP data. Occamy features 48 clusters of RISC-V cores with custom extensions, two 64-bit host cores, and a latency-tolerant multi-chiplet interconnect and memory system with 32 GiB of HBM2E. It achieves leading-edge utilization on stencils (83 %), sparse-dense (42 %), and sparse-sparse (49 %) matrix multiply., Comment: 2 pages, 7 figures. Accepted at the 2024 IEEE Symposium on VLSI Technology & Circuits

The rapid advancement and exploration of open-hardware RISC-V platforms are driving significant changes in sectors like autonomous vehicles, smart-city infrastructure, and medical devices. OpenTitan stands out as a groundbreaking open-source RISC-V design with a comprehensive security toolkit as a standalone system-on-chip (SoC). OpenTitan includes Earl Grey, a fully implemented and silicon-proven SoC, and Darjeeling, announced but not yet fully implemented. Earl Grey targets standalone SoC implementations, while Darjeeling is for integrable implementations. The literature lacks a silicon-ready embedded implementation of an open-source Root of Trust, despite lowRISC's efforts on Darjeeling. We address the limitations of existing implementations by optimizing data transfer latency between memory and cryptographic accelerators to prevent under-utilization and ensure efficient task acceleration. Our contributions include a comprehensive methodology for integrating custom extensions and IPs into the Earl Grey architecture, architectural enhancements for system-level integration, support for varied boot modes, and improved data movement across the platform. These advancements facilitate deploying OpenTitan in broader SoCs, even without specific technology-dependent IPs, providing a deployment-ready research vehicle for the community. We integrated the extended Earl Grey architecture into a reference architecture in a 22nm FDX technology node, benchmarking the enhanced architecture's performance. The results show significant improvements in cryptographic processing speed, achieving up to 2.7x speedup for SHA-256/HMAC and 1.6x for AES accelerators compared to the baseline Earl Grey architecture.

The ongoing revolution in application domains targeting autonomous navigation, first and foremost automotive "zonalization", has increased the importance of certain off-chip communication interfaces, particularly Ethernet. The latter will play an essential role in next-generation vehicle architectures as the backbone connecting simultaneously and instantaneously the zonal/domain controllers. There is thereby an incumbent need to introduce a performant Ethernet controller in the open-source HW community, to be used as a proxy for architectural explorations and prototyping of mixed-criticality systems (MCSs). Driven by this trend, in this work, we propose a fully open-source, DMA-enhanced, technology-agnostic Gigabit Ethernet architecture that overcomes the limitations of existing open-source architectures, such as Lowrisc's Ethernet, often tied to FPGA implementation, performance-bound by sub-optimal design choices such as large memory buffers, and in general not mature enough to bridge the gap between academia and industry. Besides the area advantage, the proposed design increases packet transmission speed up to almost 3x compared to Lowrisc's and is validated through implementation and FPGA prototyping into two open-source, heterogeneous MCSs., Comment: 4 pages,4 figures, 21st ACM International Conference on Computing Frontiers Workshops and Special Sessions

RISC-V open-source systems are emerging in deployment scenarios where safety and security are critical. OpenTitan is an open-source silicon root-of-trust designed to be deployed in a wide range of systems, from high-end to deeply embedded secure environments. Despite the availability of various cryptographic hardware accelerators that make OpenTitan suitable for offloading cryptographic workloads from the main processor, there has been no accurate and quantitative establishment of the benefits derived from using OpenTitan as a secure accelerator. This paper addresses this gap by thoroughly analysing strengths and inefficiencies when offloading cryptographic workloads to OpenTitan. The focus is on three key IPs - HMAC, AES, and OpenTitan Big Number accelerator (OTBN) - which can accelerate four security workloads: Secure Hash Functions, Message Authentication Codes, Symmetric cryptography, and Asymmetric cryptography. For every workload, we develop a bare-metal driver for the OpenTitan accelerator and analyze its efficiency when computation is offloaded from a RISC-V application core within a System-on-Chip designed for secure Cyber-Physical Systems applications. Finally, we assess it against a software implementation on the application core. The characterization was conducted on a cycle-accurate RTL simulator of the System-on-Chip (SoC). Our study demonstrates that OpenTitan significantly outperforms software implementations, with speedups ranging from 4.3x to 12.5x. However, there is potential for even greater gains as the current OpenTitan utilizes a fraction of the accelerator bandwidths, which ranges from 16% to 61%, depending on the memory being accessed and the accelerator used. Our results open the way to the optimization of OpenTitan-based secure platforms, providing design guidelines to unlock the full potential of its accelerators in secure applications., Comment: 8 pages, 2 figures, accepted at CF'24 conference, pre camera-ready version

Ensuring predictability in modern real-time Systems-on-Chip (SoCs) is an increasingly critical concern for many application domains such as automotive, robotics, and industrial automation. An effective approach involves the modeling and development of hardware components, such as interconnects and shared memory resources, to evaluate or enforce their deterministic behavior. Unfortunately, these IPs are often closed-source, and these studies are limited to the single modules that must later be integrated with third-party IPs in more complex SoCs, hindering the precision and scope of modeling and compromising the overall predictability. With the coming-of-age of open-source instruction set architectures (RISC-V) and hardware, major opportunities for changing this status quo are emerging. This study introduces an innovative methodology for modeling and analyzing State-of-the-Art (SoA) open-source SoCs for low-power cyber-physical systems. Our approach models and analyzes the entire set of open-source IPs within these SoCs and then provides a comprehensive analysis of the entire architecture. We validate this methodology on a sample heterogenous low-power RISC-V architecture through RTL simulation and FPGA implementation, minimizing pessimism in bounding the service time of transactions crossing the architecture between 28% and 1%, which is considerably lower when compared to similar SoA works.

The rapid advancement of energy-efficient parallel ultra-low-power (ULP) ucontrollers units (MCUs) is enabling the development of autonomous nano-sized unmanned aerial vehicles (nano-UAVs). These sub-10cm drones represent the next generation of unobtrusive robotic helpers and ubiquitous smart sensors. However, nano-UAVs face significant power and payload constraints while requiring advanced computing capabilities akin to standard drones, including real-time Machine Learning (ML) performance and the safe co-existence of general-purpose and real-time OSs. Although some advanced parallel ULP MCUs offer the necessary ML computing capabilities within the prescribed power limits, they rely on small main memories (<1MB) and ucontroller-class CPUs with no virtualization or security features, and hence only support simple bare-metal runtimes. In this work, we present Shaheen, a 9mm2 200mW SoC implemented in 22nm FDX technology. Differently from state-of-the-art MCUs, Shaheen integrates a Linux-capable RV64 core, compliant with the v1.0 ratified Hypervisor extension and equipped with timing channel protection, along with a low-cost and low-power memory controller exposing up to 512MB of off-chip low-cost low-power HyperRAM directly to the CPU. At the same time, it integrates a fully programmable energy- and area-efficient multi-core cluster of RV32 cores optimized for general-purpose DSP as well as reduced- and mixed-precision ML. To the best of the authors' knowledge, it is the first silicon prototype of a ULP SoC coupling the RV64 and RV32 cores in a heterogeneous host+accelerator architecture fully based on the RISC-V ISA. We demonstrate the capabilities of the proposed SoC on a wide range of benchmarks relevant to nano-UAV applications. The cluster can deliver up to 90GOp/s and up to 1.8TOp/s/W on 2-bit integer kernels and up to 7.9GFLOp/s and up to 150GFLOp/s/W on 16-bit FP kernels.

Modern RISC-V platforms control and monitor security-critical systems such as industrial controllers and autonomous vehicles. While these platforms feature a Root-of-Trust (RoT) to store authentication secrets and enable secure boot technologies, they often lack Control-Flow Integrity (CFI) enforcement and are vulnerable to cyber-attacks which divert the control flow of an application to trigger malicious behaviours. Recent techniques to enforce CFI in RISC-V systems include ISA modifications or custom hardware IPs, all requiring ad-hoc binary toolchains or design of CFI primitives in hardware. This paper proposes TitanCFI, a novel approach to enforce CFI in the RoT. TitanCFI modifies the commit stage of the protected core to stream control flow instructions to the RoT and it integrates the CFI enforcement policy in the RoT firmware. Our approach enables maximum reuse of the hardware resource present in the System-on-Chip (SoC), and it avoids the design of custom IPs and the modification of the compilation toolchain, while exploiting the RoT tamper-proof storage and cryptographic accelerators to secure CFI metadata. We implemented the proposed architecture on a modern RISC-V SoC along with a return address protection policy in the RoT, and benchmarked area and runtime overhead. Experimental results show that TitanCFI achieves overhead comparable to SoA hardware CFI solutions for most benchmarks, with lower area overhead, resulting in 1% of additional area occupation., Comment: 6 pages, 1 figure, accepted at DATE'24 conference, pre camera-ready version