Search

Propanil residues can contaminate habitats where microbial degradation is predominant. In this study, an efficient propanil-degrading strain C-1 was isolated from paddy and identified as Rhodococcus sp. It can completely degrade 10 μg/L-150 mg/L propanil within 0.33-10 h via the hydrolysis of the amide bond, forming 3,4-dichloroaniline. A novel bifunctional amidase, PamC, was identified in strain C-1. PamC can catalyze the hydrolysis of the amide bond of propanil to produce 3,4-dichloroaniline as well as the hydrolysis of the ester bonds of aryloxyphenoxypropionate herbicides (APPHs, clodinafop-propargyl, cyhalofop-butyl, fenoxaprop- p -ethyl, fluazifop- p -butyl, haloxyfop- p -methyl, and quizalofop -p -ethyl) to form aryloxyphenoxypropionic acids. Molecular docking and site-directed mutagenesis confirmed that the catalytic triad Lys82-Ser157-Ser181 was the active center for PamC to hydrolyze propanil and cyhalofop-butyl. This study presents a novel bifunctional amidase with capabilities for both amide and ester bond hydrolysis and enhances our understanding of the molecular mechanisms underlying the degradation of propanil and APPHs.

Due to its detrimental impact on human health and the environment, regulations demand ultralow sulfur levels on fossil fuels, in particular in diesel. However, current desulfurization techniques are expensive and cannot efficiently remove heteroaromatic sulfur compounds, which are abundant in crude oil and concentrate in the diesel fraction after distillation. Biodesulfurization via the four enzymes of the metabolic 4S pathway of the bacterium Rhodococcus erythropolis (DszA-D) is a possible solution. However, the 4S pathway needs to operate at least 500 times faster for industrial applicability, a goal currently pursued through enzyme engineering. In this work, we unveil the catalytic mechanism of the flavin monooxygenase DszA. Surprisingly, we found that this enzyme follows a recently proposed atypical mechanism that passes through the formation of an N 5 OOH intermediate at the re side of the cofactor, aided by a well-defined, predominantly hydrophobic O 2 pocket. Besides clarifying the unusual chemical mechanism of the complex DszA enzyme, with obvious implications for understanding the puzzling chemistry of flavin-mediated catalysis, the result is crucial for the rational engineering of DszA, contributing to making biodesulfurization attractive for the oil refining industry.

The efficient immobilization of haloalkane dehalogenase (DhaA) on carriers with retaining of its catalytic activity is essential for its application in environmental remediation. In this work, adsorption orientation and conformation of DhaA on different functional surfaces were investigated by computer simulations; meanwhile, the mechanism of varying the catalytic activity was also probed. The corresponding experiments were then carried out to verify the simulation results. (The simulations of DhaA on SAMs provided parallel insights into DhaA adsorption in carriers. Then, the theory-guided experiments were carried out to screen the best surface functional groups for DhaA immobilization.) The electrostatic interaction was considered as the main impact factor for the regulation of enzyme orientation, conformation, and enzyme bioactivity during DhaA adsorption. The synergy of overall conformation, enzyme substrate tunnel structural parameters, and distance between catalytic active sites and surfaces codetermined the catalytic activity of DhaA. Specifically, it was found that the positively charged surface with suitable surface charge density was helpful for the adsorption of DhaA and retaining its conformation and catalytic activity and was favorable for higher enzymatic catalysis efficiency in haloalkane decomposition and environmental remediation. The neutral, negatively charged surfaces and positively charged surfaces with high surface charge density always caused relatively larger DhaA conformation change and decreased catalytic activity. This study develops a strategy using a combination of simulation and experiment, which can be essential for guiding the rational design of the functionalization of carriers for enzyme adsorption, and provides a practical tool to rationally screen functional groups for the optimization of adsorbed enzyme functions on carriers. More importantly, the strategy is general and can be applied to control behaviors of different enzymes on functional carrier materials.

A thiamine diphosphate-dependent enzyme annotated as a benzoylformate decarboxylase is encoded by gene cluster ro02984-ro02986 in Rhodococcus jostii RHA1 previously shown to generate vanillin and 4-hydroxybenzaldehyde from lignin oxidation, and a closely related gene cluster is also found in the genome of Pseudomonas fluorescens Pf-5. Two hypotheses for possible pathways involving a thiamine diphosphate-dependent cleavage, either C-C cleavage of a ketol or diketone aryl C 3 substrate or decarboxylation of an aryl C 2 substrate, were investigated by expression and purification of the recombinant enzymes and expression of dehydrogenase and oxidase enzymes also found in the gene clusters. The ThDP-dependent enzymes showed no activity for cleavage of aryl C 3 ketol or diketone substrates but showed activity for decarboxylation of benzoylformate and 4-hydroxybenzoylformate. A flavin-dependent oxidase encoded by gene ro02984 was found to oxidize either mandelic acid or phenylglyoxal. The crystal structure of the P. fluorescens decarboxylase enzyme was determined at 1.69 Å resolution, showing similarity to structures of known benzoylformate decarboxylase enzymes. The P. fluorescens decarboxylase enzyme showed enhanced carboligase activity between vanillin and acetaldehyde, rationalized by the presence of alanine versus serine at residue 73 in the enzyme active site, which was investigated further by site-directed mutagenesis of this residue. A hypothesis for a pathway for degradation of aryl C 2 fragments arising from oxidative cleavage of phenylcoumaran and diarylpropane structures in lignin is proposed.

Naturally occurring enzymatic pathways enable highly specific, rapid thiophenic sulfur cleavage occurring at ambient temperature and pressure, which may be harnessed for the desulfurization of petroleum-based fuel. One pathway found in bacteria is a four-step catabolic pathway (the 4S pathway) converting dibenzothiophene (DBT), a common crude oil contaminant, into 2-hydroxybiphenyl (HBP) without disrupting the carbon-carbon bonds. 2'-Hydroxybiphenyl-2-sulfinate desulfinase ( DszB ), the rate-limiting enzyme in the enzyme cascade, is capable of selectively cleaving carbon-sulfur bonds. Accordingly, understanding the molecular mechanisms of DszB activity may enable development of the cascade as industrial biotechnology. Based on crystallographic evidence, we hypothesized that DszB undergoes an active site conformational change associated with the catalytic mechanism. Moreover, we anticipated this conformational change is responsible, in part, for enhancing product inhibition. Rhodococcus erythropolis IGTS8 DszB was recombinantly produced and purified via Escherichia coli BL21 to test these hypotheses. Activity and the resulting conformational change of DszB in the presence of HBP were evaluated. The activity of recombinant DszB was comparable to the natively expressed enzyme and was inhibited via competitive binding of the product, HBP. Using circular dichroism, global changes in DszB conformation were monitored in response to HBP concentration, which indicated that both product and substrate produced similar structural changes. Molecular dynamics (MD) simulations and free energy perturbation with Hamiltonian replica exchange molecular dynamics (FEP/λ-REMD) calculations were used to investigate the molecular-level phenomena underlying the connection between conformation change and kinetic inhibition. In addition to the HBP, MD simulations of DszB bound to common, yet structurally diverse, crude oil contaminants 2',2-biphenol (BIPH), 1,8-naphthosultam (NTAM), 2-biphenyl carboxylic acid (BCA), and 1,8-naphthosultone (NAPO) were performed. Analysis of the simulation trajectories, including root-mean-square fluctuation (RMSF), center of mass (COM) distances, and strength of nonbonded interactions, when compared with FEP/λ-REMD calculations of ligand binding free energy, showed excellent agreement with experimentally determined inhibition constants. Together, the results show that the combination of a molecule's hydrophobicity and nonspecific interactions with nearby functional groups contributes to a competitive inhibition mechanism that locks DszB in a closed conformation and precludes substrate access to the active site.

Rhodococcus opacus PD630 ( R. opacus ) is a nonmodel, Gram-positive bacterium that holds promise as a biological catalyst for the conversion of lignocellulosic biomass to value-added products. In particular, it demonstrates both a high tolerance for and an ability to consume inhibitory lignin-derived aromatics, generates large quantities of lipids, exhibits a relatively rapid growth rate, and has a growing genetic toolbox for engineering. However, the availability of genetic parts for tunable, high-activity gene expression is still limited in R. opacus . Furthermore, genetic logic circuits for sophisticated gene regulation have never been demonstrated in Rhodococcus spp. To address these shortcomings, two inducible T7 RNA polymerase-based expression systems were implemented for the first time in R. opacus and applied to the construction of AND and NAND genetic logic gates. Additionally, three isopropyl β-d-1-thiogalactopyranoside (IPTG)-inducible promoters were created by inserting LacI binding sites into newly characterized constitutive promoters. Furthermore, four novel aromatic sensors for 4-hydroxybenzoic acid, vanillic acid, sodium benzoate, and guaiacol were developed, expanding the gene expression toolbox. Finally, the T7 RNA polymerase platform was combined with a synthetic IPTG-inducible promoter to create an IMPLY logic gate. Overall, this work represents the first demonstration of a heterologous RNA polymerase system and synthetic genetic logic in R. opacus , enabling complex and tunable gene regulation in this promising nonmodel host for bioproduction.

Glycan head-groups attached to glycosphingolipids (GSLs) found in the cell membrane bilayer can alter in response to external stimuli and disease, making them potential markers and/or targets for cellular disease states. To identify such markers, comprehensive analyses of glycan structures must be undertaken. Conventional analyses of fluorescently labeled glycans using hydrophilic interaction high-performance liquid chromatography (HILIC) coupled with mass spectrometry (MS) provides relative quantitation and has the ability to perform automated glycan assignments using glucose unit (GU) and mass matching. The use of ion mobility (IM) as an additional level of separation can aid the characterization of closely related or isomeric structures through the generation of glycan collision cross section (CCS) identifiers. Here, we present a workflow for the analysis of procainamide-labeled GSL glycans using HILIC-IM-MS and a new, automated glycan identification strategy whereby multiple glycan attributes are combined to increase accuracy in automated structural assignments. For glycan matching and identification, an experimental reference database of GSL glycans containing GU, mass, and CCS values for each glycan was created. To assess the accuracy of glycan assignments, a distance-based confidence metric was used. The assignment accuracy was significantly better compared to conventional HILIC-MS approaches (using mass and GU only). This workflow was applied to the study of two Triple Negative Breast Cancer (TNBC) cell lines and revealed potential GSL glycosylation signatures characteristic of different TNBC subtypes.

The metabolism of widely used aryloxyphenoxypropionate herbicides has been extensively studied in microbes. However, the information on the degradation of diclofop-methyl (DCM) is limited, with no genetic and biochemical investigation reported. The consortium L1 of Rhodococcus sp. JT-3 and Brevundimonas sp. JT-9 was able to degrade DCM through a synergistic metabolism. To elaborate the molecular mechanism of DCM degradation, the metabolic pathway for DCM was first investigated. DCM was initially transformed by strain JT-3 to diclofop acid and then by strain JT-9 to 2-(4-hydroxyphenoxy) propionic acid as well as 2,4-dichlorophenol. Subsequently, the two dcm gene clusters, dcmAE and dcmB1B2CD, involved in further degradation of 2,4-dichlorophenol, were successfully cloned from strain JT-3, and the functions of each gene product were identified. DcmA, a glutathione-dependent dehalogenase, was responsible for catalyzing the reductive dehalogenation of 2,4-dichlorophenol to 4-chlorophenol, which was then converted by the two-component monooxygenase DcmB1B2 to 4-chlorocatechol as the ring cleavage substrate of the dioxygenase DcmC. In this study, the overall DCM degradation pathway of the consortium L1 was proposed and, particularly, the lower part on the DCP degradation was characterized at the genetic and biochemical levels.

Many dynamic biological processes are regulated by protein-protein interactions and protein localization. Experimental techniques to probe such processes with temporal and spatial precision include photoactivatable proteins and chemically induced dimerization (CID) of proteins. CID has been used to study several cellular events, especially cell signaling networks, which are often reversible. However, chemical dimerizers that can be both rapidly activated and deactivated with high spatiotemporal resolution are currently limited. Herein, we present a novel chemical inducer of protein dimerization that can be rapidly turned on and off using single pulses of light at two orthogonal wavelengths. We demonstrate the utility of this molecule by controlling peroxisome transport and mitotic checkpoint signaling in living cells. Our system highlights and enhances the spatiotemporal control offered by CID. This tool addresses biological questions on subcellular levels by controlling protein-protein interactions.

Monoterpenoids offer potential as biocatalytically derived monomer feedstocks for high-performance renewable polymers. We describe a biocatalytic route to lactone monomers menthide and dihydrocarvide employing Baeyer-Villiger monooxygenases (BVMOs) from Pseudomonas sp. HI-70 (CPDMO) and Rhodococcus sp. Phi1 (CHMO Phi1 ) as an alternative to organic synthesis. The regioselectivity of dihydrocarvide isomer formation was controlled by site-directed mutagenesis of three key active site residues in CHMO Phi1 . A combination of crystal structure determination, molecular dynamics simulations, and mechanistic modeling using density functional theory on a range of models provides insight into the origins of the discrimination of the wild type and a variant CHMO Phi1 for producing different regioisomers of the lactone product. Ring-opening polymerizations of the resultant lactones using mild metal-organic catalysts demonstrate their utility in polymer production. This semisynthetic approach utilizing a biocatalytic step, non-petroleum feedstocks, and mild polymerization catalysts allows access to known and also to previously unreported and potentially novel lactone monomers and polymers.

Laboratory evolution of alcohol dehydrogenase produced enzyme variants with improved turnover numbers with a vicinal 1,2-diol and its corresponding hydroxyketone. Crystal structure and transient kinetics analysis aids in rationalizing the new functions of these variants.

The anthropogenic toxic compound 1,2,3-trichloropropane is poorly degradable by natural enzymes. We have previously constructed the haloalkane dehalogenase DhaA31 by focused directed evolution ( Pavlova, M. et al. Nat. Chem. Biol. 2009 , 5 , 727 - 733 ), which is 32 times more active than the wild-type enzyme and is currently the most active variant known against that substrate. Recent evidence has shown that the structural basis responsible for the higher activity of DhaA31 was poorly understood. Here we have undertaken a comprehensive computational study of the main steps involved in the biocatalytic hydrolysis of 1,2,3-trichloropropane to decipher the structural basis for such enhancements. Using molecular dynamics and quantum mechanics approaches we have surveyed (i) the substrate binding, (ii) the formation of the reactive complex, (iii) the chemical step, and (iv) the release of the products. We showed that the binding of the substrate and its transport through the molecular tunnel to the active site is a relatively fast process. The cleavage of the carbon-halogen bond was previously identified as the rate-limiting step in the wild-type. Here we demonstrate that this step was enhanced in DhaA31 due to a significantly higher number of reactive configurations of the substrate and a decrease of the energy barrier to the S N 2 reaction. C176Y and V245F were identified as the key mutations responsible for most of those improvements. The release of the alcohol product was found to be the rate-limiting step in DhaA31 primarily due to the C176Y mutation. Mutational dissection of DhaA31 and kinetic analysis of the intermediate mutants confirmed the theoretical observations. Overall, our comprehensive computational approach has unveiled mechanistic details of the catalytic cycle which will enable a balanced design of more efficient enzymes. This approach is applicable to deepen the biochemical knowledge of a large number of other systems and may contribute to robust strategies in the development of new biocatalysts.

Small compound active site interactors receive considerable attention for their ability to positively influence the fold of glycosidases. Endoglycoceramidase II (EGCII) from Rhodococcus sp. is an endo-β-glucosidase releasing the complete glycan from ceramide in glycosphingolipids. Cleavage of the β-glycosidic linkage between glucose and ceramide is also catalyzed by glucocerebrosidase (GBA), the exo-β-glucosidase deficient in Gaucher disease. We demonstrate that established β-glucoside-configured cyclophellitol-type activity-based probes (ABPs) for GBA also are effective, mechanism-based, and irreversible inhibitors of EGCII. The stability of EGCII is markedly enhanced by formation of covalent complexes with cyclophellitol ABPs substituted with hydrophobic moieties, as evidenced by an increased melting temperature, resistance against tryptic digestion, changes in (15)N-(1)H transverse relaxation optimized spectroscopy spectra of the [(15)N]Leu-labeled enzyme, and relative hydrophobicity as determined by 8-anilino-1-naphthalenesulfonic acid fluorescence. The stabilization of EGCII conformation correlates with the shape and hydrophobicity of the substituents of the ABPs. We conclude that the amphipathic active site binders with aliphatic moieties act as a "hydrophobic zipper" on the flexible EGCII protein structure.

The biological function of glycosphingolipids (GSLs) is largely determined by their glycan headgroup moiety. This has placed a renewed emphasis on detailed GSL headgroup structural analysis. Comprehensive profiling of GSL headgroups in biological samples requires the use of endoglycoceramidases with broad substrate specificity and a robust workflow that enables their high-throughput analysis. We present here the first high-throughput glyco-analytical platform for GSL headgroup profiling. The workflow features enzymatic release of GSL glycans with a novel broad-specificity endoglycoceramidase I (EGCase I) from Rhodococcus triatomea, selective glycan capture on hydrazide beads on a robotics platform, 2AB-fluorescent glycan labeling, and analysis by UPLC-HILIC-FLD. R. triatomea EGCase I displayed a wider specificity than known EGCases and was able to efficiently hydrolyze gangliosides, globosides, (n)Lc-type GSLs, and cerebrosides. Our workflow was validated on purified GSL standard lipids and was applied to the characterization of GSLs extracted from several mammalian cell lines and human serum. This study should facilitate the analytical workflow in functional glycomics studies and biomarker discovery.

The vast majority of characterized oxygenases use bound cofactors to activate molecular oxygen to carry out oxidation chemistry. Here, we show that an enzyme of unknown activity, RhCC from Rhodococcus jostii RHA1, functions as an oxygenase, using 4-hydroxyphenylenolpyruvate as a substrate. This unique and complex reaction yields 3-hydroxy-3-(4-hydroxyphenyl)-pyruvate, 4-hydroxybenzaldehyde, and oxalic acid as major products. Incubations with H2(18)O, (18)O2, and a substrate analogue suggest that this enzymatic oxygenation reaction likely involves a peroxide anion intermediate. Analysis of sequence similarity and the crystal structure of RhCC (solved at 1.78 Å resolution) reveal that this enzyme belongs to the tautomerase superfamily. Members of this superfamily typically catalyze tautomerization, dehalogenation, or decarboxylation reactions rather than oxygenation reactions. The structure shows the absence of cofactors, establishing RhCC as a rare example of a redox-metal- and coenzyme-free oxygenase. This sets the stage to study the mechanistic details of cofactor-independent oxygen activation in the unusual context of the tautomerase superfamily.

The Baeyer-Villiger monooxygenases (BVMOs) are microbial enzymes that catalyze the synthetically useful Baeyer-Villiger oxidation reaction. The available BVMO crystal structures all lack a substrate or product bound in a position that would determine the substrate specificity and stereospecificity of the enzyme. Here, we report two crystal structures of cyclohexanone monooxygenase (CHMO) with its product, ε-caprolactone, bound: the CHMO(Tight) and CHMO(Loose) structures. The CHMO(Tight) structure represents the enzyme state in which substrate acceptance and stereospecificity is determined, providing a foundation for engineering BVMOs with altered substrate spectra and/or stereospecificity. The CHMO(Loose) structure is the first structure where the product is solvent accessible. This structure represents the enzyme state upon binding and release of the substrate and product. In addition, the role of the invariant Arg329 in chaperoning the substrate/product during the catalytic cycle is highlighted. Overall, these data provide a structural framework for the engineering of BVMOs with altered substrate spectra and/or stereospecificity.

The anthropogenic compound 1,2,3-trichloropropane (TCP) has recently drawn attention as an emerging groundwater contaminant. No living organism, natural or engineered, is capable of the efficient aerobic utilization of this toxic industrial waste product. We describe a novel biotechnology for transforming TCP based on an immobilized synthetic pathway. The pathway is composed of three enzymes from two different microorganisms: engineered haloalkane dehalogenase from Rhodococcus rhodochrous NCIMB 13064, and haloalcohol dehalogenase and epoxide hydrolase from Agrobacterium radiobacter AD1. Together, they catalyze consecutive reactions converting toxic TCP to harmless glycerol. The pathway was immobilized in the form of purified enzymes or cell-free extracts, and its performance was tested in batch and continuous systems. Using a packed bed reactor filled with the immobilized biocatalysts, 52.6 mmol of TCP was continuously converted into glycerol within 2.5 months of operation. The efficiency of the TCP conversion to the intermediates was 97%, and the efficiency of conversion to the final product glycerol was 78% during the operational period. Immobilized biocatalysts are suitable for removing TCP from contaminated water up to a 10 mM solubility limit, which is an order of magnitude higher than the concentration tolerated by living microorganisms.

Catalyzed by Rhodococcus erythropolis AJ270 whole cells in an aqueous phosphate buffer-n-hexane biphasic system, racemic axially chiral 2,3-allenenitriles underwent hydrolysis to afford enantioenriched (aR)-2,3-allenamides and (aS)-2,3-allenoic acids with ee's up to >99.5%. Overall biotransformations proceeded through the nitrile hydratase-catalyzed efficient but nonselective hydration of nitriles followed by the amide hydrolysis catalyzed by the substrate-dependent enantioselective amidase. The application of the method has been demonstrated by the transformations of the resulting allene products into highly functionalized heterocyclic compounds with axial chirality of reactants being entirely transferred into or expressed as point chirality of products.

Post-translational redox generation of cysteine-sulfenic acids (Cys-SOH) functions as an important reversible regulatory mechanism for many biological functions, such as signal transduction, balancing cellular redox states, catalysis, and gene transcription. Herein we show that arylboronic acids and cyclic benzoxaboroles can form adducts with sulfenic acids in aqueous medium and that these boron-based compounds can potentially be used to trap biologically significant sulfenic acids. As proof of principle we demonstrate that a benzoxaborole can inhibit the enzyme activity of an iron-containing nitrile hydratase, which requires a catalytic αCys114-SOH in the active site. The nature of the adduct and the effect of the boronic acid's pK(a)(B) on the stability constant of the adduct are discussed within.

The use of purified and overexpressed alcohol dehydrogenases to synthesize enantiopure fluorinated alcohols is shown. When the bioreductions were performed with ADH-A from Rhodococcus ruber overexpressed in E. coli, no external cofactor was necessary to obtain the enantiopure (R)-derivatives. Employing Lactobacillus brevis ADH, it was possible to achieve the synthesis of enantiopure (S)-fluorohydrins at a 0.5 M substrate concentration. Furthermore, due to the activated character of these substrates, a huge excess of the hydrogen donor was not necessary.

Time-dependent fluorescence shifts (TDFS) of chromophores selectively attached to proteins may give information on the dynamics of the probed protein moieties and their degree of hydration. Previously, we demonstrated that a coumarin dye selectively labeling the tunnel mouth of different haloalkane dehalogenases (HLDs) can distinguish between different widths of tunnel mouth openings. In order to generalize those findings analogous experiments were performed using a different chromophore probing the same region of these enzymes. To this end we synthesized and characterized three new fluorescent probes derived from dimethylaminonaphthalene bearing a linker almost identical to that of the coumarin dye used in our previous study. Labeling efficiencies, acrylamide quenching, fluorescence anisotropies, and TDFS for the examined fluorescent substrates confirm the picture gained from the coumarin studies: the different tunnel mouth opening, predicted by crystal structures, is reflected in the hydration and tunnel mouth dynamics of the investigated HLDs. Comparison of the TDFS reported by the coumarin dye with those obtained with the new dimethylaminonaphthalene dyes shows that the choice of chromophore may strongly influence the recorded TDFS characteristics. The intrinsic design of our labeling strategy and the variation of the linker length ensure that both dyes probe the identical enzyme region; moreover, the covalently fixed position of the chromophore does not allow for a major relocalization within the HLD structures. Our study shows, for the first time, that TDFS may strongly depend on the choice of the chromophore, even though the identical region of a protein is explored.

We report a combined quantum mechanical/molecular mechanical (QM/MM) study of the effect of mutations of the Phe434 residue in the active site of cyclohexanone monooxygenase (CHMO) on its enantioselectivity toward 4-hydroxycyclohexanone. In terms of our previously established model of the enzymatic Baeyer-Villiger reaction, enantioselectivity is governed by the preference toward the equatorial ((S)-selectivity) or axial ((R)-selectivity) conformation of the substituent at the C4 carbon atom of the cyclohexanone ring in the Criegee intermediate and the subsequent rate-limiting transition state for migration (TS2). We assess the enantiopreference by locating all relevant TS2 structures at the QM/MM level. In the wild-type enzyme we find that the axial conformation is energetically slightly more stable, thus leading to a small excess of (R)-product. In the Phe434Ser mutant, there is a hydrogen bond between the serine side chain and the equatorial substrate hydroxyl group that is retained during the whole reaction, and hence there is pronounced reverse (S)-enantioselectivity. Another mutant, Phe434Ile, is shown to preserve and enhance the (R)-selectivity. All these findings are in accordance with experiment. The QM/MM calculations allow us to explain the effect of point mutations on CHMO enantioselectivity for the first time at the molecular level by an analysis of the specific interactions between substrate and active-site environment in the TS2 structures that satisfy the basic stereoelectronic requirement of anti-periplanarity for the migrating σ-bond.

Rhodococcus sp. strain B1 could degrade 100 mg/L butachlor within 5 days. Butachlor was first hydrolyzed by strain B1 through N-dealkylation, which resulted in the production of butoxymethanol and 2-chloro-N-(2,6-dimethylphenyl)acetamide. Butoxymethanol could be further degraded and utilized as the carbon source for the growth of strain B1, whereas 2-chloro-N-(2,6-dimethylphenyl)acetamide could not be degraded further. The hydrolase designated ChlH, responsible for the N-dealkylation of the side chain of butachlor, was purified 185.1-fold to homogeneity with 16.1% recovery. The optimal pH and temperature of ChlH were observed to be 7.0-7.5 and 30 °C, respectively. This enzyme was also able to catalyze the N-dealkylation of other chloroacetamide herbicides; the catalytic efficiency followed the order alachlor > acetochlor >butachlor > pretilachlor, which indicated that the alkyl chain length influenced the N-dealkylation of the chloroacetamide herbicides. This is the first report on the biodegradation of chloroacetamide herbicides at the enzyme level.

Aldoxime dehydratase is a heme-containing enzyme that utilizes the ferrous rather than the ferric ion to catalyze the synthesis of nitriles by dehydration of the substrate. We report a theoretical study of this enzyme aimed at elucidating its catalytic mechanism and understanding this oxidation state preference (Fe(2+) versus Fe(3+)). The uncatalyzed dehydration reaction was modeled by including three and four water molecules to assist in the proton transfer, but the computed barriers were very high at both the DFT (B3LYP) and coupled cluster CCSD(T) levels. The enzymatic dehydration of Z-acetaldoxime was explored through QM/MM calculation using two different QM regions and covering all three possible spin states. The reaction starts by substrate coordination to Fe(2+) via its nitrogen atom to form a six-coordinated singlet reactant complex. The ferrous heme catalyzes the N-O bond cleavage by transferring one electron to the antibond in the singlet state, while His320 functions as a general acid to deliver a proton to the leaving hydroxide, thus facilitating its departure. The key intermediate is identified as an Fe(III)(CH(3)CH═N(•)) species (triplet or open-shell singlet), with the closed-shell singlet Fe(II)(CH(3)CH═N(+)) being about 6 kcal/mol higher. Subsequently, the same His320 residue abstracts the α-proton, coupled with electron transfer back to the iron center. Both steps are calculated to have feasible barriers (14-15 kcal/mol), in agreement with experimental kinetic studies. For the same mode of substrate coordination, the ferric heme does not catalyze the N-O bond cleavage, because the reaction is endothermic by about 40 kcal/mol, mainly due to the energetic penalty for oxidizing the ferric heme. The alternative binding option, in which the anionic aldoxime coordinates to the ferric ion via its oxyanion, also results in a high barrier (around 30 kcal/mol), mainly because of the large endothermicity associated with the generation of a suitable base (neutral His320) for proton abstraction.

Catalyzed by Rhodococcus erythropolis AJ270, an amidase-containing microbial whole cell catalyst in neutral phosphate buffer at 30 °C, a number of prochiral α-substituted α-aminomalonamides underwent highly efficient and enantioselective hydrolytic desymmetrization to afford functionalized α-tetrasubstituted α-amino acids in 74-98% chemical yields and 94.0 to >99.5% ee. The presence of a free α-amino (NH(2)) substituent in the substrates was deemed important to ensure high biocatalytic efficiency and enantioselectivity. The synthetic application of biocatalytic desymmetrization was demonstrated by practical chemical transformations of (R)-2-amino-2-carbamoylpent-4-enoic acid to α-substituted serine analogues and a bioactive diamino alcohol derivative.

Anaerobic transformation of the explosive RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) by microorganisms involves sequential reduction of N-NO(2) to the corresponding N-NO groups resulting in the initial formation of MNX (hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine). MNX is further reduced to the dinitroso (DNX) and trinitroso (TNX) derivatives. In this paper, we describe the degradation of MNX and TNX by the unusual cytochrome P450 XplA that mediates metabolism of RDX in Rhodococcus rhodochrous strain 11Y. XplA is known to degrade RDX under aerobic and anaerobic conditions, and, in the present study, was found able to degrade MNX to give similar products distribution including NO(2)(-), NO(3)(-), N(2)O, and HCHO but with varying stoichiometric ratio, that is, 2.06, 0.33, 0.33, 1.18, and 1.52, 0.15, 1.04, 2.06, respectively. In addition, the ring cleavage product 4-nitro-2,4,-diazabutanal (NDAB) and a trace amount of another intermediate with a [M-H](-) at 102 Da, identified as ONNHCH(2)NHCHO (NO-NDAB), were detected mostly under aerobic conditions. Interestingly, degradation of TNX was observed only under anaerobic conditions in the presence of RDX and/or MNX. When we incubated RDX and its nitroso derivatives with XplA, we found that successive replacement of N-NO(2) by N-NO slowed the removal rate of the chemicals with degradation rates in the order RDX > MNX > DNX, suggesting that denitration was mainly responsible for initiating cyclic nitroamines degradation by XplA. This study revealed that XplA preferentially cleaved the N-NO(2) over the N-NO linkages, but could nevertheless degrade all three nitroso derivatives, demonstrating the potential for complete RDX removal in explosives-contaminated sites.

3-Hydroxybenzoate 6-hydroxylase (3HB6H) from Rhodococcus jostii RHA1 is a nicotinamide adenine dinucleotide (NADH)-specific flavoprotein monooxygenase involved in microbial aromatic degradation. The enzyme catalyzes the para hydroxylation of 3-hydroxybenzoate (3-HB) to 2,5-dihydroxybenzoate (2,5-DHB), the ring-fission fuel of the gentisate pathway. In this study, the kinetics of reduction of the enzyme-bound flavin by NADH was investigated at pH 8.0 using a stopped-flow spectrophotometer, and the data were analyzed comprehensively according to kinetic derivations and simulations. Observed rate constants for reduction of the free enzyme by NADH under anaerobic conditions were linearly dependent on NADH concentrations, consistent with a one-step irreversible reduction model with a bimolecular rate constant of 43 ± 2 M(-1) s(-1). In the presence of 3-HB, observed rate constants for flavin reduction were hyperbolically dependent on NADH concentrations and approached a limiting value of 48 ± 2 s(-1). At saturating concentrations of NADH (10 mM) and 3-HB (10 mM), the reduction rate constant is ~51 s(-1), whereas without 3-HB, the rate constant is 0.43 s(-1) at a similar NADH concentration. A similar stimulation of flavin reduction was found for the enzyme-product (2,5-DHB) complex, with a rate constant of 45 ± 2 s(-1). The rate enhancement induced by aromatic ligands is not due to a thermodynamic driving force because Em 0 for the enzyme-substrate complex is -179 ± 1 mV compared to an E(m)(0) of -175 ± 2 mV for the free enzyme. It is proposed that the reduction mechanism of 3HB6H involves an isomerization of the initial enzyme-ligand complex to a fully activated form before flavin reduction takes place.

The Baeyer-Villiger monooxygenases (BVMOs) are a family of bacterial flavoproteins that catalyze the synthetically useful Baeyer-Villiger oxidation reaction. This involves the conversion of ketones into esters or cyclic ketones into lactones by introducing an oxygen atom adjacent to the carbonyl group. The BVMOs offer exquisite regio- and enantiospecificity while acting on a wide range of substrates. They use only NADPH and oxygen as cosubstrates, and produce only NADP(+) and water as byproducts, making them environmentally attractive for industrial purposes. Here, we report the first crystal structure of a BVMO, cyclohexanone monooxygenase (CHMO) from Rhodococcus sp. HI-31 in complex with its substrate, cyclohexanone, as well as NADP(+) and FAD, to 2.4 Å resolution. This structure shows a drastic rotation of the NADP(+) cofactor in comparison to previously reported NADP(+)-bound structures, as the nicotinamide moiety is no longer positioned above the flavin ring. Instead, the substrate, cyclohexanone, is found at this location, in an appropriate position for the formation of the Criegee intermediate. The rotation of NADP(+) permits the substrate to gain access to the reactive flavin peroxyanion intermediate while preventing it from diffusing out of the active site. The structure thus reveals the conformation of the enzyme during the key catalytic step. CHMO is proposed to undergo a series of conformational changes to gradually move the substrate from the solvent, via binding in a solvent excluded pocket that dictates the enzyme's chemospecificity, to a location above the flavin-peroxide adduct where catalysis occurs.

Enantioselective epoxidation followed by regioselective epoxide opening reaction are the key processes in construction of the polyether skeleton. Recent genetic analysis of ionophore polyether biosynthetic gene clusters suggested that flavin-containing monooxygenases (FMOs) could be involved in the oxidation steps. In vivo and in vitro analyses of Lsd18, an FMO involved in the biosynthesis of polyether lasalocid, using simple olefin or truncated diene of a putative substrate as substrate mimics demonstrated that enantioselective epoxidation affords natural type mono- or bis-epoxide in a stepwise manner. These findings allow us to figure out enzymatic polyether construction in lasalocid biosynthesis., (© 2012 American Chemical Society)

Gamma-caprolactone (GCL) is well-known as a food flavor and has been recently described as a biostimulant molecule promoting the growth of bacteria with biocontrol activity against soft-rot pathogens. Among these biocontrol agents, Rhodococcus erythropolis, characterized by a remarkable metabolic versatility, assimilates various γ-butyrolactone molecules with a branched-aliphatic chain, such as GCL. The assimilative pathway of GCL in R. erythropolis was investigated by two-dimensional gel electrophoresis coupled to matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) analysis. This analysis suggests the involvement of the lactonase QsdA in ring-opening, a feature confirmed by heterologous expression in Escherichia coli. According to proteome analysis, the open-chain form of GCL was degraded by β- and ω-oxidation coupled to the Krebs cycle and β-ketoadipate pathway. Ubiquity of qsdA gene among environmental R. erythropolis isolates was verified by PCR. In addition to a previous N-acyl homoserine lactone catabolic function, QsdA may therefore be involved in an intermediate degradative step of cyclic recalcitrant molecules or in synthesis of flavoring lactones.

Fourier transform infrared (FTIR) spectra, "light" minus "dark" difference FTIR spectra, and time-resolved step-scan (TRS(2)) FTIR spectra are reported for carbonmonoxy aldoxime dehydratase. Two C-O modes of heme at 1945 and 1964 cm(-1) have been identified and remained unchanged in H(2)O/D(2)O exchange and in the pH 5.6-8.5 range, suggesting the presence of two conformations at the active site. The observed C-O frequencies are 5 and 16 cm(-1) lower and higher, respectively, than that obtained previously (Oinuma, K.-I.; et al. FEBS Lett.2004, 568, 44-48). We suggest that the strength of the Fe-His bond and the neutralization of the negatively charged propionate groups modulate the ν(Fe-CO)/ν(CO) back-bonding correlation. The "light" minus "dark" difference FTIR spectra indicate that the heme propionates are in both the protonated and deprotonated forms, and the photolyzed CO becomes trapped within a ligand docking site (ν(CO) = 2138 cm(-1)). The TRS(2)-FTIR spectra show that the rate of recombination of CO to the heme is k(1945 cm(-1)) = 126 ± 20 s(-1) and k(1964 cm(-1)) = 122 ± 20 s(-1) at pH 5.6, and k(1945 cm(-1)) = 148 ± 30 s(-1) and k(1964 cm(-1)) = 158 ± 32 s(-1) at pH 8.5. The rate of decay of the heme propionate vibrations is on a time scale coincident with the rate of rebinding, suggesting that there is a coupling between ligation dynamics in the distal heme environment and the environment sensed by the heme propionates. The implications of these results with respect to the proximal His-Fe heme environment including the propionates and the positively charged or proton-donating residues in the distal pocket which are crucial for the synthesis of nitriles are discussed.

Rhodococcus jostii RHA1, a polychlorinated biphenyl-degrading soil bacterium whose genome has been sequenced, shows lignin degrading activity in two recently developed spectrophotometric assays. Bioinformatic analysis reveals two unannotated peroxidase genes present in the genome of R. jostii RHA1 with sequence similarity to open reading frames in other lignin-degrading microbes. They are members of the Dyp peroxidase family and were annotated as DypA and DypB, on the basis of bioinformatic analysis. Assay of gene deletion mutants using a colorimetric lignin degradation assay reveals that a ΔdypB mutant shows greatly reduced lignin degradation activity, consistent with a role in lignin breakdown. Recombinant DypB protein shows activity in the colorimetric assay and shows Michaelis-Menten kinetic behavior using Kraft lignin as a substrate. DypB is activated by Mn(2+) by 5-23-fold using a range of assay substrates, and breakdown of wheat straw lignocellulose by recombinant DypB is observed over 24-48 h in the presence of 1 mM MnCl(2). Incubation of recombinant DypB with a β-aryl ether lignin model compound shows time-dependent turnover, giving vanillin as a product, indicating that C(α)-C(β) bond cleavage has taken place. This reaction is inhibited by addition of diaphorase, consistent with a radical mechanism for C-C bond cleavage. Stopped-flow kinetic analysis of the DypB-catalyzed reaction shows reaction between the intermediate compound I (397 nm) and either Mn(II) (k(obs) = 2.35 s(-1)) or the β-aryl ether (k(obs) = 3.10 s(-1)), in the latter case also showing a transient at 417 nm, consistent with a compound II intermediate. These results indicate that DypB has a significant role in lignin degradation in R. jostii RHA1, is able to oxidize both polymeric lignin and a lignin model compound, and appears to have both Mn(II) and lignin oxidation sites. This is the first detailed characterization of a recombinant bacterial lignin peroxidase.

The soil bacterium Rhodococcus jostii RHA1 contains two dye-decolorizing peroxidases (DyPs) named according to the subfamily they represent: DypA, predicted to be periplasmic, and DypB, implicated in lignin degradation. Steady-state kinetic studies of these enzymes revealed that they have much lower peroxidase activities than C- and D-type DyPs. Nevertheless, DypA showed 6-fold greater apparent specificity for the anthraquinone dye Reactive Blue 4 (k(cat)/K(m) = 12800 ± 600 M(-1) s(-1)) than either ABTS or pyrogallol, consistent with previously characterized DyPs. By contrast, DypB showed the greatest apparent specificity for ABTS (k(cat)/K(m) = 2000 ± 100 M(-1) s(-1)) and also oxidized Mn(II) (k(cat)/K(m) = 25.1 ± 0.1 M(-1) s(-1)). Further differences were detected using electron paramagnetic resonance (EPR) spectroscopy: while both DyPs contained high-spin (S = (5)/(2)) Fe(III) in the resting state, DypA had a rhombic high-spin signal (g(y) = 6.32, g(x) = 5.45, and g(z) = 1.97) while DypB had a predominantly axial signal (g(y) = 6.09, g(x) = 5.45, and g(z) = 1.99). Moreover, DypA reacted with H(2)O(2) to generate an intermediate with features of compound II (Fe(IV)═O). By contrast, DypB reacted with H(2)O(2) with a second-order rate constant of (1.79 ± 0.06) × 10(5) M(-1) s(-1) to generate a relatively stable green-colored intermediate (t(1/2) ∼ 9 min). While the electron absorption spectrum of this intermediate was similar to that of compound I of plant-type peroxidases, its EPR spectrum was more consistent with a poorly coupled protein-based radical than with an [Fe(IV)═O Por(•)](+) species. The X-ray crystal structure of DypB, determined to 1.4 Å resolution, revealed a hexacoordinated heme iron with histidine and a solvent species occupying axial positions. A solvent channel potentially provides access to the distal face of the heme for H(2)O(2). A shallow pocket exposes heme propionates to the solvent and contains a cluster of acidic residues that potentially bind Mn(II). Insight into the structure and function of DypB facilitates its engineering for the improved degradation of lignocellulose.

Putrescine oxidase (PuO) from Rhodococcus erythropolis is a soluble homodimeric flavoprotein, which oxidizes small aliphatic diamines. In this study, we report the crystal structures and cofactor binding properties of wild-type and mutant enzymes. From a structural viewpoint, PuO closely resembles the sequence-related human monoamine oxidases A and B. This similarity is striking in the flavin-binding site even if PuO does not covalently bind the cofactor as do the monoamine oxidases. A remarkable conserved feature is the cis peptide conformation of the Tyr residue whose conformation is important for substrate recognition in the active site cavity. The structure of PuO in complex with the reaction product reveals that Glu324 is crucial in recognizing the terminal amino group of the diamine substrate and explains the narrow substrate specificity of the enzyme. The structural analysis also provides clues for identification of residues that are responsible for the competitive binding of ADP versus FAD (~50% of wild-type PuO monomers isolated are occupied by ADP instead of FAD). By replacing Pro15, which is part of the dinucleotide-binding domain, enzyme preparations were obtained that are almost 100% in the FAD-bound form. Furthermore, mutants have been designed and prepared that form a covalent 8α-S-cysteinyl-FAD linkage. These data provide new insights into the molecular basis for substrate recognition in amine oxidases and demonstrate that engineering of flavoenzymes to introduce covalent linkage with the cofactor is a possible route to develop more stable protein molecules, better suited for biocatalytic purposes.

Rhodococcus rhodochrous J1 produces high- and low-molecular mass nitrile hydratases (H-NHase and L-NHase, respectively), depending on the inducer. The incorporation of cobalt into L-NHase has been found to depend on the α-subunit exchange between cobalt-free L-NHase (apo-L-NHase) and its cobalt-containing mediator, NhlAE (holo-NhlAE), this novel mode of post-translational maturation having been named self-subunit swapping and NhlE having been recognized as a self-subunit swapping chaperone. We discovered an H-NHase maturation mediator, NhhAG, consisting of NhhG and the α-subunit of H-NHase. The incorporation of cobalt into H-NHase was confirmed to be dependent on self-subunit swapping. For the first time, particles larger than apo-H-NHase were observed during the swapping process via dynamic light scattering measurements, suggesting the formation of intermediate complexes. On the basis of these findings, we initially proposed a possible mechanism for self-subunit swapping. Electron paramagnetic resonance analysis demonstrated that the coordination environment of a cobalt ion in holo-NhhAG is subtly different from that in H-NHase. Cobalt is inserted into cobalt-free NhhAG (apo-NhhAG) but not into apo-H-NHase, suggesting that NhhG functions not only as a self-subunit swapping chaperone but also as a metallochaperone. In addition, α-subunit swapping did not occur between apo-L-NHase and holo-NhhAG or between apo-H-NHase and holo-NhlAE in vitro. These findings revealed that self-subunit swapping is a subunit-specific reaction.

We report the synthesis of carbon nanotubes (CNTs)/mesostructured silica core-shell nanowires via an interfacial surfactant templating approach. The nanowires possess perpendicularly aligned and uniform accessible mesopores, high surface area and large pore volume. When dimethyl sulfoxide reductase (DMSOR) enzyme is immobilized on the core-shell nanowires, the complex can enhance the electrical communication between the active sites of the enzyme and the electrode surface in the presence of a mediator. The unique properties of the CNTs and the uniform accessible mesopores of the nanowires have made this material promising in the applications as carbon nanotubes field-effect transistors, electrochemical detection, and biosensors.

The transient-state kinetic approach reveals the formation and subsequent interconversions of intermediates in real time. Its potential for the mechanistic resolution of enzymatic and other complex chemical mechanisms has been severely limited however by the lack of a rigorous and applicable theoretical basis in contrast to that of the less direct but soundly based algebraic algorithms of the steady-state approach. Having recently established three rigorously derived fundamental "rules" of transient-state kinetics applicable to realistic multiple step reactions, we present here the successful application of the very counterintuitive "second rule" to the resolution of the mechanism of the l-phenylalanine dehydrogenase catalyzed reaction.

Cyclohexanone monooxygenase (CHMO) is a flavoprotein that carries out the archetypical Baeyer-Villiger oxidation of a variety of cyclic ketones into lactones. Using NADPH and O(2) as cosubstrates, the enzyme inserts one atom of oxygen into the substrate in a complex catalytic mechanism that involves the formation of a flavin-peroxide and Criegee intermediate. We present here the atomic structures of CHMO from an environmental Rhodococcus strain bound with FAD and NADP(+) in two distinct states, to resolutions of 2.3 and 2.2 A. The two conformations reveal domain shifts around multiple linkers and loop movements, involving conserved arginine 329 and tryptophan 492, which effect a translation of the nicotinamide resulting in a sliding cofactor. Consequently, the cofactor is ideally situated and subsequently repositioned during the catalytic cycle to first reduce the flavin and later stabilize formation of the Criegee intermediate. Concurrent movements of a loop adjacent to the active site demonstrate how this protein can effect large changes in the size and shape of the substrate binding pocket to accommodate a diverse range of substrates. Finally, the previously identified BVMO signature sequence is highlighted for its role in coordinating domain movements. Taken together, these structures provide mechanistic insights into CHMO-catalyzed Baeyer-Villiger oxidation.

The effect of temperature as a determinant for selecting microbial populations associated with alkane-degradation was examined in crude oil-amended soil microcosms. After a 30-day incubation, >95% of n-alkane components in the crude-oil were depleted and approximately 40 and 60% of added [14C] hexadecane was converted to 14CO2 at 4-10 and 25 degrees C, respectively. Concomitant with crude-oil depletion, 16S rRNA gene sequence analysis revealed the emergence of a prominent Rhodococcus-like 16S rRNA sequence at all temperatures and a prominent Pseudomonas-like sequence at 4 and 10 degrees C. The diversity of alkane hydroxylase genes (alkB) associated with the amendments was examined using group-specific alkB-PCR primerstargeting phylogenetically distinct groups of alkane-degrading bacteria and subsequent cloning, denaturing gradient gel electrophoresis and sequencing analyses. Diverse Rhodococcus-alkB genes were detected at all temperatures, while a single prominent Pseudomonas-alkB genotype was detected only at lower temperatures. Two isolates obtained from the microcosms were shown to have 16S rRNA and alkB genes identical to those observed and were used to examine growth as a function of temperature. The Pseudomonas isolate exhibited a substantially higher growth rate at 4 and 10 degrees C than the Rhodococcus isolate, consistent with the inference that differences in adaptation to low temperature explain the observed shift in populations. High resolution analysis of alkB genes enabled the differentiation of distinct alkane-degrading populations responding to crude-oil amendment from other closely related, well-studied strains with different temperature adaptations.

Biotransformations of a number of racemic beta-hydroxy and beta-amino nitrile derivatives were studied using Rhodococcus erythropolis AJ270, the nitrile hydratase and amidase-containing microbial whole cell catalyst, under very mild conditions. The overall enantioselectivity of nitrile biotransformations was governed predominantly by the amidase whose enantioselectivity was switched on remarkably by an O- and a N-benzyl protection group of the substrates. While biotransformations of beta-hydroxy and beta-amino alkanenitriles gave low yields of amide and acid products of very low enantiomeric purity, introduction of a simple benzyl protection group on the beta-hydroxy and beta-amino of nitrile substrates led to the formation of highly enantioenriched beta-benzyloxy and beta-benzylamino amides and acids in almost quantitative yield. The easy protection and deprotection operations, high chemical yield, and excellent enantioselectivity render the nitrile biotransformation a useful protocol in the synthesis of enantiopure beta-hydroxy and beta-amino acids.

Catalyzed by Rhodococcus erythropolis AJ270 (whole cell catalyst) under very mild conditions, a number of racemic trans-3-arylaziridine-2-carbonitriles and amides were efficiently transformed into enantiopure 2R,3S-3-arylaziridine-2-carboxamides. While the nitrile hydratase exhibits low selectivity against nitrile substrates, the amidase is highly enantioselective toward 2S,3R-3-arylaziridine-2-carboxamides. Upon the treatment with catalytic hydrogenation, amine, or water in the presence of one equivalent of TFA, the resulting aziridine-2-carboxamides underwent highly efficient and stereospecific ring-opening reactions to produce enantiopure alpha-amino-, alpha,beta-diamino-, and alpha-amino-beta-hydroxy-propanamide derivatives in high yields.

Mono- and biphasic aqueous-organic solvent systems (50% v v-1) as well as micro-aqueous organic systems (99% v v-1) were successfully employed for the biocatalytic reduction of ketones catalyzed by alcohol dehydrogenase ADH-A from Rhodococcus ruber via hydrogen transfer. A clear correlation between the log P of the organic solvent and the enzyme activity--the higher, the better--was found. The use of organic solvents allowed highly stereoselective enzymatic carbonyl reductions at substrate concentrations close to 2.0 M.

[reaction: see text] Enantiopure (1R,2S)-1-benzyl- and 1-arylaziridine-2-carboxamides were obtained by kinetic resolution of their racemates by Rhodococcus rhodochrous IFO 15564 catalyzed hydrolysis. Several regio- and enantioselective nucleophilic ring openings of (1R,2S)-1-benzylaziridine-2-carboxamide or its LAH-reduced product led to a series of enantiopure products, such as O-methyl-l-serine and some vicinal diamines.

In essence, evolutionary processes occur gradually, while maintaining fitness throughout. Along this line, it has been proposed that the ability of a progenitor to promiscuously catalyze a low level of the evolving activity could facilitate the divergence of a new function by providing an immediate selective advantage. To directly establish a role for promiscuity in the divergence of natural enzymes, we attempted to trace the origins of a bacterial phosphotriesterase (PTE), an enzyme thought to have evolved for the purpose of degradation of a synthetic insecticide introduced in the 20th century. We surmised that PTE's promiscuous lactonase activity may be a vestige of its progenitor and tested homologues annotated as "putative PTEs" for lactonase and phosphotriesterase activity. We identified three genes that define a new group of microbial lactonases dubbed PTE-like lactonases (PLLs). These enzymes proficiently hydrolyze various lactones, and in particular quorum-sensing N-acyl homoserine lactones (AHLs), and exhibit much lower promiscuous phosphotriesterase activities. PLLs share key sequence and active site features with PTE and differ primarily by an insertion in one surface loop. Given their biochemical and biological function, PLLs are likely to have existed for many millions of years. PTE could have therefore evolved from a member of the PLL family while utilizing its latent promiscuous paraoxonase activity as an essential starting point.

Metabolically engineered Escherichia coli has previously been used to degrade cis-1,2-dichloroethylene (cis-DCE). The strains express the six genes of an evolved toluene ortho-monooxygenase from Burkholderia cepacia G4 (TOM-Green, which formed a reactive epoxide) with either (1) gamma-glutamylcysteine synthetase (GSHI, which forms glutathione) and the glutathione S-transferase IsoILR1 from Rhodococcus AD45 (which adds glutathione to the reactive cis-DCE epoxide) or (2) with an evolved epoxide hydrolase from Agrobacterium radiobacter AD1 (EchA F108L/I219L/C248I which converts the reactive cis-DCE epoxide to a diol). Here, the impact of this metabolic engineering for bioremediation was assessed by investigating the changes in the proteome through a quantitative shotgun proteomics technique (iTRAQ) by tracking the changes due to the sequential addition of TOM-Green, IsoILR1, and GSHI and due to adding the evolved EchA versus the wild-type enzyme to TOM-Green. For the TOM-Green/EchA system, 8 proteins out of 268 identified proteins were differentially expressed in the strain expressing EchA F108L/I219L/C248I relative to wild-type EchA (e.g., EchA, protein chain elongation factor EF-Ts, 50S ribosomal subunits L7/L12/L32/L29, cysteine synthase A, glycerophosphodiester phosphodiesterase, iron superoxide dismutase). For the TOM-Green/IsoILR1/GSHI system, the expression level of 49 proteins was changed out of 364 identified proteins. The induced proteins due to the addition of TOM-Green, IsoILR1, and GSHI were involved in the oxidative defense mechanism, pyruvate metabolism, and glutathione synthesis (e.g., 30S ribosomal subunit proteins S3 and S16, 50S ribosomal subunit protein L20, alkyl hydroperoxide reductase, lactate dehydrogenase, acetate kinase, cysteine synthase A). Enzymes involved in indole synthesis, fatty acid synthesis, gluconeogenesis, and the tricarboxylic acid cycle were repressed (e.g., tryptophanase, acetyl-CoA carboxylase, phosphoenolpyruvate carboxykinase, malate dehydrogenase). Hence, the metabolic engineering that leads to enhanced aerobic degradation of 1 mM cis-DCE (2.4-4-fold more chloride ions released) and reduced toxicity from cis-DCE epoxide results in enhanced synthesis of glutathione coupled with an induced stress response as well as repression of fatty acid synthesis, gluconeogenesis, and the tricarboxylic acid cycle.

An enzyme "alkylaldoxime dehydratase (OxdRG)" was purified and characterized from Rhodococcus globerulus A-4, in which nitrile hydratase (NHase) and amidase coexisted with the enzyme. The enzyme contains heme b as a prosthetic group, requires reducing reagents for the reaction, and is most active at a neutral pH and at around 30 degrees C, similar to the phenylacetaldoxime dehydratase from Bacillus sp. OxB-1 (OxdB). However, some differences were seen in subunit structure, substrate specificity, and effects of activators and inhibitors. The corresponding gene, oxd, encoding a 1059-base pair ORF consisting of 353 codons, was cloned, sequenced, and overexpressed in Escherichia coli. The predicted polypeptide showed 30.3% identity to OxdB. The gene is mapped just upstream of the gene cluster encoding the enzymes involved in the metabolism of aliphatic nitriles, i.e., NHase and amidase, and their regulatory and activator proteins. We report here the existence of an aldoxime dehydratase genetically linked with NHase and amidase, and responsible for the metabolism of alkylaldoxime in R. globerulus.

Nitrile hydratase (NHase) from Rhodococcus N-771, which catalyzes hydration of nitriles to the corresponding amides, exhibits novel photosensitivity; in the dark, it is in the inactive form that binds an endogenous nitric oxide (NO) molecule at the non-heme iron center, and photodissociation of the NO activates the enzyme. NHase is also known to have a unique active site structure. Two cysteine ligands to the iron center, alphaCys112 and alphaCys114, are post-translationally modified to sulfinic acid (Cys-SO(2)H) and sulfenic acid (Cys-SOH), respectively, which are thought to play a crucial role in the catalytic reaction. Here, we have determined the protonation structures of these Cys-SO(2)H and Cys-SOH groups using Fourier transform infrared (FTIR) spectroscopy in combination with density functional theory (DFT) calculations. The light-induced FTIR difference spectrum of NHase between the dark inactive and light active forms exhibited two prominent signals at (1154-1148)/1126 and (1040-1034)/1019 cm(-1), which downshifted to 1141/1114 and 1026/1012 cm(-1), respectively, in the uniformly (34)S-labeled NHase. In addition, a minor signal at 915/908 cm(-1) also showed a considerable downshift upon (34)S labeling. These (34)S-sensitive signals were basically conserved in D(2)O buffer with only slight shifts. Vibrational frequencies of methanesulfenic acid (CH(3)SOH) and methanesulfinic acid (CH(3)SO(2)H), simple model compounds of Cys-SOH and Cys-SO(2)H, respectively, were calculated using the DFT method in both the protonated and deprotonated forms and in metal complexes. Comparison of the calculated frequencies and isotope shifts with the observed ones provided the assignment of the two major signals around 1140 and 1030 cm(-1) to the asymmetric and symmetric SO(2) stretching vibrations, respectively, of the S-bonded Cys-SO(2)(-) complex, and the assignment of the minor signal around 910 cm(-1) most likely to the SO stretch of the S-bonded Cys-SO(-) complex. These assignments and the small frequency shifts upon deuteration are consistent with the view that the deprotonated alphaCys112-SO(2)(-) and alphaCys114-SO(-) are hydrogen-bonded with the protons from betaArg56 and/or betaArg141, forming a reactive cavity at the interface of the alpha and beta subunits. There is further speculation that either of these groups is hydrogen bonded to a reactant water molecule, increasing its basicity to facilitate the nucleophilic attack on the nitrile substrate bound to the iron center.

Nitrile hydratase (NHase) is a non-heme iron or non-corrin cobalt enzyme having two post-translationally modified ligand residues, cysteine-sulfinic acid (alphaCys112-SO(2)H) and -sulfenic acid (alphaCys114-SOH). We studied the interaction between Fe-type NHase and isobutyronitrile (iso-BN) which had been reported as a competitive inhibitor with a K(i) value of 5 microM. From detailed kinetic studies of the inhibitory effect of iso-BN on Fe-type NHase, we found that authentic iso-BN was hydrated normally and that the impurity present in commercially available iso-BN inhibited NHase activity strongly. The inhibitory compound induced significant changes in the UV-vis absorption spectrum of NHase, suggesting its interaction with the iron center. This compound was purified by using reversed-phase HPLC and identified as 2-cyano-2-propyl hydroperoxide (Cpx) by (1)H and PFG-HMBC NMR spectroscopy. Upon addition of a stoichiometric amount of Cpx, NHase was irreversibly inactivated, probably by the oxidation of alphaCys114-SOH to Cys-SO(2)H. This result suggests that the -SOH structure of alphaCys114 is essential for the catalytic activity. The oxygen atom in Cys-SO(2)H is confirmed to come from the solvent H(2)O. The oxidized NHase was found to induce the UV-vis absorption spectral changes by addition of Cpx, suggesting that Cpx strongly interacted with iron(III) in the oxidized NHase to form a stable complex. Thus, Cpx functions as a novel irreversible inhibitor for NHase.

Haloalkane dehalogenase from Rhodococcus rhodochrous NCIMB 13064 (DhaA) catalyzes the hydrolysis of carbon-halogen bonds in a wide range of haloalkanes. We examined the steady-state and pre-steady-state kinetics of halopropane conversion by DhaA to illuminate mechanistic details of the dehalogenation pathway. Steady-state kinetic analysis of DhaA with a range of halopropanes showed that bromopropanes had higher k(cat) and lower K(M) values than the chlorinated analogues. The kinetic mechanism of dehalogenation was further studied using rapid-quench-flow analysis of 1,3-dibromopropane conversion. This provided a direct measurement of the chemical steps in the reaction mechanism, i.e., cleavage of the carbon-halogen bond and hydrolysis of the covalent alkyl-enzyme intermediate. The results lead to a minimal mechanism consisting of four main steps. The occurrence of a pre-steady-state burst, both for bromide and 3-bromo-1-propanol, suggests that product release is rate-limiting under steady-state conditions. Combining pre-steady-state burst and single-turnover experiments indicated that the rate of carbon-bromine bond cleavage was indeed more than 100-fold higher than the steady-state k(cat). Product release occurred with a rate constant of 3.9 s(-1), a value close to the experimental k(cat) of 2.7 s(-1). Comparing the kinetic mechanism of DhaA with that of the corresponding enzyme from Xanthobacter autotrophicus GJ10 (DhlA) shows that the overall mechanisms are similar. However, whereas in DhlA the rate of halide release represents the slowest step in the catalytic cycle, our results suggest that in DhaA the release of 3-bromo-1-propanol is the slowest step during 1,3-dibromopropane conversion.