Search

III-nitride heterostructure-based metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs), compared with Schottky and p-GaN gate HEMTs, have demonstrated significant potential in the next-generation high-power electronic devices due to their exceptional gate reliability. This study presents a comprehensive investigation of threshold voltage (VTH) instability in III-nitride heterostructure-based MIS-HEMTs, with a specific emphasis on the interfaces of the multi-heterostructures. Two widely studied amorphous materials, namely, Al2O3 and SiNx, have been extensively examined as primary gate insulators in GaN-based MIS-HEMTs. To efficiently remove native oxides from the (Al)GaN surface, a novel in situ high-temperature remote plasma pretreatment (RPP) technique has been developed. This technique involves sequential application of NH3/N2 plasmas on the (Al)GaN surface before depositing the gate insulators using plasma-enhanced atomic layer deposition. The remarkable RPP process has proven to be a highly effective method for revealing atomic steps on the GaN surface, irrespective of whether the surface has undergone oxidation or etching processes. To further enhance the interface quality and potentially reduce bulk traps in the gate insulator, optimization of deposition temperature and post-deposition annealing conditions have been explored. Additionally, an electron-blocking layer, such as SiON, is incorporated into the MIS-HEMTs to prevent electron injection into bulk traps within the insulator. Novel characterization techniques including constant-capacitance and isothermal-mode deep-level transient spectroscopy have also been developed to explore the failure mechanisms in MIS-HEMTs. These techniques allow for the differentiation between bulk traps in the GaN epitaxy and those present within the gate insulators. This in-depth physical understanding provides valuable insights into the sources of failure in GaN-based MIS-HEMTs. [ABSTRACT FROM AUTHOR]

Ultrathin oxides (UOs) and ultrathin nitrides (UNs) play a crucial role in forming lattice-mismatched semiconductor heterostructures that are fabricated by using semiconducting grafting approach. The grafting approach has shown its great potential to realize GaN-based heterojunction bipolar transistors by fulfilling the missing high-performance p-type nitrides with other p-type semiconductors. A handful of UO and UN dielectrics readily available by atomic layer deposition (ALD) satisfy the requirements of double-sided surface passivation and quantum tunneling for semiconductor grafting. Due to the states existing between the UO or UN conduction band and that of the GaN, the ALD deposited UO or UN layer can generate significant effects on the surface band-bending of GaN. Understanding the band parameters of the interface between UO or UN and c-plane Ga-face GaN can guide the selection of interfacial dielectrics for grafted GaN-based devices. In this study, we performed x-ray photoelectron spectroscopy measurements to obtain the band-bending properties on c-plane, Ga-face GaN samples coated by different ALD cycles of ultrathin-HfO2 or ultrathin AlN. The valence band spectra of GaN coated with ultrathin-ALD–Al2O3, ALD–HfO2, or PEALD–AlN/ALD–Al2O3 were further analyzed to calculate the valence and conduction band offsets between the ALD dielectrics and the Ga-face GaN under different thicknesses and post-deposition annealing conditions of the dielectrics. [ABSTRACT FROM AUTHOR]

High quality Al2O3 film grown by atomic layer deposition (ALD), with ozone (O3) as oxygen source, is demonstrated for fabrication of normally-off AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs). Significant suppression of Al-O-H and Al-Al bonds in ALD-Al2O3 has been realized by substituting conventional H2O source with O3. A high dielectric breakdown E-field of 8.5 MV/cm and good TDDB behavior are achieved in a gate dielectric stack consisting of 13-nm O3-Al2O3 and 2-nm H2O-Al2O3 interfacial layer on recessed GaN. By using this 15-nm gate dielectric and a high-temperature gate-recess technique, the density of positive bulk/interface charges in normally-off AlGaN/GaN MIS-HEMTs is remarkably suppressed to as low as 0.9 x 1012cm-2, contributing to the realization of normally-off operation with a high threshold voltage of +1.6 V and a low specific ON-resistance RON,sp of 0.49 mΩ cm². [ABSTRACT FROM AUTHOR]