Search

Lipid vesicles immobilized via molecular linkers at a solid support represent a convenient platform for basic and applied studies of biological processes occurring at lipid membranes. Using total internal reflection fluorescence microscopy (TIRFM), one can track such processes at the level of individual vesicles provided that they contain dyes. In such experiments, it is desirable to determine the size of each vesicle, which may be in the range from 50 to 1000 nm. Fortunately, TIRFM in combination with nanoparticle tracking analysis makes it possible to solve this problem as well. Herein, we present the formalism allowing one to interpret the TIRFM measurements of the latter category. The analysis is focused primarily on the case of unpolarized light. The specifics of the use of polarized light are also discussed. In addition, we show the expected difference in size distribution of suspended and immobilized vesicles under the assumption that the latter ones are deposited under diffusion-controlled conditions. In the experimental part of our work, we provide representative results, showing explicit advantages and some shortcomings of the use of TIRFM in the context under consideration, as well as how our refined formalism improves previously suggested approaches. [ABSTRACT FROM AUTHOR]

Kinetics of vesicle adsorption on SiO[sub 2] and TiO[sub 2] surfaces was investigated for vesicle sizes from 25 to 200 nm. On SiO[sub 2], nonruptured vesicles are adsorbed up to a critical coverage, Θ[sub c], after which spontaneous rupture and bilayer formation occurs in qualitatively the same manner for all vesicle sizes. On TiO[sub 2], adsorption of nonruptured vesicles continues up to saturation. A comparison between the kinetics at low coverages on SiO[sub 2] and TiO[sub 2], where intact vesicles adsorb on both surfaces, reveals that the vesicles on SiO[sub 2] are more flattened than nonruptured vesicles adsorbed on TiO[sub 2], indicating a stronger vesicle-surface interaction on SiO[sub 2]. [ABSTRACT FROM AUTHOR]

The genesis for this topical review stems from the interdisciplinary Biointerfaces International conference 2016 (BI 2016) in Zurich, Switzerland, wherein the need for advances in analytical tools was both expressed and addressed. Pushing the limits of detection for characterizing individual components, such as single proteins, single drug-delivery vehicles, or probing single living cells in a more natural environment, will contribute to the understanding of the complex biomolecular systems central to a number of applications including medical diagnostics, tissue engineering, and drug screening and delivery. Accordingly, the authors begin with an overview of single nanoparticle analytics highlighting two emerging techniques and how they compare with existing techniques. The first is based on single particle tracking of nanoparticles tethered to a mobile supported lipid bilayer, enabling the simultaneous characterization of both size and composition of individual nanoparticles. The second technique is based on probing variations in the ionic conduction across nanoscale apertures for detection of not only nanoparticles but also membrane-tethered proteins, thereby allowing a multiparameter characterization of individual nanoscopic objects, addressing their size, shape, charge, and dipole moment. Subsequently, the authors lead into an example of an area of application that stands to benefit from such advances in bioanalytics, namely, the development of biomimetic lipid- and polymer-based assemblies as stimuli-responsive artificial organelles and nanocarriers designed to optimize delivery of next generation high-molecular-weight biological drugs. This in turn motivates the need for additional advanced techniques for investigating the cellular response to drug delivery, and so the review returns again to bioanalytics, in this case single-cell analysis, while highlighting a technique capable of probing and manipulating the content of individual living cells via fluidic force microscopy. In presenting a concerted movement in the field of bioinspired bioanalytics, positioned in the context of drug delivery, while also noting the critical role of surface modifications, it is the authors’ aim to evaluate progress in the field of single component bioanalytics and to emphasize the impact of initiating and maintaining a fruitful dialogue among scientists, together with clinicians and industry, to guide future directions in this area and to steer innovation to successful translation. [ABSTRACT FROM AUTHOR]

Accurate detection and quantification of individual molecules is important for the development of improved diagnostic methods as well as biochemical characterization of disease progression and treatments. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a surface analysis technique capable of imaging the distribution of specific molecules on surfaces with a high spatial resolution (<1 μm) and high sensitivity. ToF-SIMS is particularly suitable for detection of molecules up to ∼2 kDa, including lipids, whereas larger molecules, such as peptides and proteins, are fragmented during analysis, which makes them difficult to identify. In this study, an approach for extending the molecular detection capability of ToF-SIMS is presented, based on the specific binding of functionalized liposomes to molecular targets on the sample surface and subsequent detection of the liposomes by ToF-SIMS. Furthermore, by using different recognition elements conjugated to liposomes with different lipid compositions, simultaneous detection of different targets was accomplished. This multiplexing capability was investigated for two types of recognition elements (antibodies and cholera toxin) and for target molecules immobilized on surfaces using two frequently applied surface functionalization strategies: a supported lipid bilayer aimed to mimic a cell membrane and a polyethylene glycol modified surface, commonly employed in bioanalytical sensor applications. The efficacy of the conjugation protocols and the specificity of the recognition mechanism were confirmed using quartz crystal microbalance with dissipation monitoring, while fluorescence microscopy was used to validate the ToF-SIMS data and the reliability of the freeze-drying step required for ToF-SIMS analysis. The results demonstrated specific binding of the two types of liposomes to each target and showed a concentration-dependent binding to the targets on the different model surfaces. In particular, the possibility to use the contrasts in the mass spectra of SIMS to identify the concentration dependent coverage of different liposomes opens up new opportunities for multiplexed detection and quantification of molecules at biotechnology relevant interfaces. [ABSTRACT FROM AUTHOR]

The organization of lipid membranes plays an important role in a wide range of biological processes at different length scales. Herein, the authors present a procedure based on time-of-flight secondary ion mass spectrometry (ToF-SIMS) to characterize the nanometer-scale ordering of lipids in lipid membrane structures on surfaces. While ToF-SIMS is a powerful tool for label-free analysis of lipid-containing samples, its limited spatial resolution prevents in-depth knowledge of how lipid properties affect the molecular assembly of the membrane. The authors overcome this limitation by measuring the formation of lipid dimers, originating in the same nanometer-sized primary ion impact areas. The lipid dimers reflect the local lipid environment and thus allow us to characterize the membrane miscibility on the nanometer level. Using this technique, the authors show that the chemical properties of the constituting lipids are critical for the structure and organization of the membrane on both the nanometer and micrometer length scales. Our results show that even at lipid surface compositions favoring two-phase systems, lipids are still extracted from solid, gel phase, domains into the surrounding fluid supported lipid bilayer surrounding the gel phase domains. The technique offers a means to obtain detailed knowledge of the chemical composition and organization of lipid membranes with potential application in systems where labeling is not possible, such as cell-derived supported lipid bilayers. [ABSTRACT FROM AUTHOR]

Synthetic polymers, nanoparticles, and carbon-based materials have great potential in applications including drug delivery, gene transfection, in vitro and in vivo imaging, and the alteration of biological function. Nature and humans use different design strategies to create nanomaterials: biological objects have emerged from billions of years of evolution and from adaptation to their environment resulting in high levels of structural complexity; in contrast, synthetic nanomaterials result from minimalistic but controlled design options limited by the authors' current understanding of the biological world. This conceptual mismatch makes it challenging to create synthetic nanomaterials that possess desired functions in biological media. In many biologically relevant applications, nanomaterials must enter the cell interior to perform their functions. An essential transport barrier is the cell-protecting plasma membrane and hence the understanding of its interaction with nanomaterials is a fundamental task in biotechnology. The authors present open questions in the field of nanomaterial interactions with biological membranes, including: how physical mechanisms and molecular forces acting at the nanoscale restrict or inspire design options; which levels of complexity to include next in computational and experimental models to describe how nanomaterials cross barriers via passive or active processes; and how the biological media and protein corona interfere with nanomaterial functionality. In this Perspective, the authors address these questions with the aim of offering guidelines for the development of next-generation nanomaterials that function in biological media. [ABSTRACT FROM AUTHOR]

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has been proven to successfully image different kinds of molecules, especially a variety of lipids, in biological samples. Proteins, however, are difficult to detect as specific entities with this method due to extensive fragmentation. To circumvent this issue, the authors present in this work a method developed for detection of proteins using antibody-conjugated liposomes, so called immunoliposomes, which are able to bind to the specific protein of interest. In combination with the capability of ToF-SIMS to detect native lipids in tissue samples, this method opens up the opportunity to analyze many different biomolecules, both lipids and proteins, at the same time, with high spatial resolution. The method has been applied to detect and image the distribution of amyloid-β (Aβ), a biologically relevant peptide in Alzheimer's disease (AD), in transgenic mouse brain tissue. To ensure specific binding, the immunoliposome binding was verified on a model surface using quartz crystal microbalance with dissipation monitoring. The immunoliposome binding was also investigated on tissue sections with fluorescence microscopy, and compared with conventional immunohistochemistry using primary and secondary antibodies, demonstrating specific binding to Aβ. Using ToF-SIMS imaging, several endogenous lipids, such as cholesterol and sulfatides, were also detected in parallel with the immunoliposome-labeled Aβ deposits, which is an advantage compared to fluorescence microscopy. This method can thus potentially provide further information about lipid-protein interactions, which is important to understand the mechanisms of neurodegeneration in AD. [ABSTRACT FROM AUTHOR]

Biosensors allowing for the rapid and sensitive detection of viral pathogens in environmental or clinical samples are urgently needed to prevent disease outbreaks and spreading. We present a bioanalytical assay for the detection of whole viral particles with single virus sensitivity. Specifically, we focus on the detection of human norovirus, a highly infectious virus causing gastroenteritis. In our assay configuration, virus-like particles are captured onto a supported lipid bilayer containing a virus-specific glycolipid and detected after recognition by a glycolipid-containing fluorescent vesicle. Read-out is performed after illumination of the vesicle labels by total internal reflection fluorescence microscopy. This allows for visualization of individual vesicles and for recording of their binding kinetics under equilibrium conditions (equilibrium fluctuation analysis), as demonstrated previously. In this work we extend the concept and demonstrate that this simple assay setup can be used as a bioanalytical assay for the detection of virus particles at a limit of detection of 16 fM. Furthermore, we demonstrate how the analysis of the single vesicle-virus-like particle interaction dynamics can contribute to increase the accuracy and sensitivity of the assay by discriminating specific from non-specific binding events. This method is suggested to be generally applicable, provided that these events display different interaction kinetics. [ABSTRACT FROM AUTHOR]

We have developed an instrument for surface interaction studies, which combines a newly invented four detector optical reflectometry setup with quartz crystal microbalance with dissipation (QCM-D) monitoring. The design is such that data from both techniques can be obtained simultaneously on the same sensor surface, with the same signal-to-noise ratio and time resolution, as for the individual techniques. In addition, synchronized information about structural transformations, molecular mass, and the hydration of thin films on solid surfaces can be obtained on the same specimen, as validated by monitoring the formation of supported lipid bilayers on a silica-coated QCM sensor surface. We emphasize that the optical (molecular) mass can be separated from the acoustic mass including hydrodynamically coupled solvent, which means, in turn, that the amount of solvent sensed by the QCM-D technique can be dynamically resolved during adsorption processes. In addition, the advantage/necessity to use four, compared to two, detector reflectometry is emphasized. [ABSTRACT FROM AUTHOR]

We demonstrate a convenient chip platform for the addressable immobilization of protein-loaded vesicles on a microarray for parallelized, high-throughput analysis of lipid-protein systems. Self-sorting of the vesicles on the microarray was achieved through DNA bar coding of the vesicles and their hybridization to complementary strands, which are preimmobilized in defined array positions on the chip. Imaging surface plasmon resonance in ellipsometric mode was used to monitor vesicle immobilization, protein tethering, protein-protein interactions, and chip regeneration. The immobilization strategy proved highly specific and stable and presents a mild method for the anchoring of vesicles to predefined areas of a surface, while unspecific adsorption to both noncomplementary regions and background areas is nonexistent or, alternatively, undetectable. Furthermore, histidine-tagged receptors have been stably and functionally immobilized via bis-nitrilotriacetic acid chelators already present in the vesicle membranes. It was discovered though that online loading of proteins to immobilized vesicles leads to cross contamination of previously loaded vesicles and that it was necessary to load the vesicles offline in order to obtain pure protein populations on the vesicles. We have used this cross-binding effect to our benefit by coimmobilizing two receptor subunits in different ratios on the vesicle surface and successfully demonstrated ternary complex formation with their ligand. This approach is suitable for mechanistic studies of complex multicomponent analyses involving membrane-bound systems. [ABSTRACT FROM AUTHOR]

The authors present in this paper how the extended Mie theory can be used to translate not only end-point data but also temporal variations of extinction peak-position changes, Δλpeak(t), into absolute mass uptake, Γ(t), upon biomacromolecule binding to localized surface plasmon resonance (SPR) active nanoparticles (NPs). The theoretical analysis is applied on a novel sensor template composed of a three-layer surface architecture based on (i) a self-assembled monolayer of HS(CH2)15COOH, (ii) a 1:1 mixture of biotinylated and pure poly(L-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG), and (iii) NeutrAvidin. Assisted by independent estimations of the thickness of the three-layer architecture using quartz crystal microbalance with dissipation (QCM-D) monitoring, excellent agreement with parallel mass-uptake estimations using planar SPR is obtained. Furthermore, unspecific binding of serum to PLL-g-PEG was shown to be below the detection limit, making the surface architecture ideally suited for label-free detection of immunoreactions. To ensure that the immunocomplex formation occurred within the limited sensing depth (∼10 nm) of the NPs, a compact model system composed of a biotinylated human recombinant single-chain antibody fragment ([nullset_(circle_with_slash-through)]∼2 nm) directed against cholera toxin was selected. By tracking changes in the centroid (center of mass) of the extinction peak, rather than the actual peak position, signal-to-noise levels and long-term stability upon cholera toxin detection are demonstrated to be competitive with results obtained using conventional SPR and state-of-the-art QCM-D data. [ABSTRACT FROM AUTHOR]

A generic protocol for the creation of material-mediated self-assembled patterns of streptavidin, defined solely by patterns of gold and SiO2, is presented. Protein-adsorption resistance of selected regions was obtained by material-specific adsorption of thiol-modified poly(ethylene)glycol (thiol-PEG) on gold followed by adsorption of poly-L-lysine (PLL) modified PEG (PLL-g-PEG) on SiO2. Selective streptavidin binding to either gold or SiO2 (or both) was ensured by introducing biotin-modified thiolated (thiol-biotin) and/or biotin-modified PLL-g-PEG (PLL-g-PEGbiotin) compounds. The introduction of biotin did not influence the protein-adsorption resistance. On the macroscopic scale, the protein-adsorption-resistant properties and the streptavidin-binding capacity were optimized using quartz crystal microbalance with dissipation monitoring. The reproduction of micrometer-scale gold patterns on SiO2 into patterns of streptavidin was verified using fluorescence microscopy, while the compatibility of the material-specific surface-modification strategy with nanoscale features was accomplished by modifying a localized surface plasmon resonance (LSPR) active template, defined by randomly distributed nanoapertures in a thin gold film on SiO2. The demonstrated compatibility of the latter substrate with LSPR-based label-free sensing of biorecognition reactions, combined with the fact that all compounds utilized are commercially available, makes the surface-modification protocol attractive as a generic surface modification solution for a broad range of biorecognition-based assays. [ABSTRACT FROM AUTHOR]

A correction to the article on the lipid membrane nanometer-scale molecular organization by ion mass spectrometry is presented.

The resonance conditions for excitation of propagating surface plasmons at planar metal/dielectric interfaces and localized surface plasmons associated with metal nanostructures are both sensitive to changes in the interfacial refractive index. This has made these phenomena increasingly popular as transducer principles in label-free sensing of biomolecular recognition reactions. In this article, the authors review the recent progress in the field of nanoplasmonic bioanalytical sensing in general, but set particular focus on certain unique possibilities provided by short-range ordered nanoholes in thin metal films. Although the latter structures are formed in continuous metal films, while nanoparticles are discrete entities, these two systems display striking similarities with respect to sensing capabilities, including bulk sensitivities, and the localization of the electromagnetic fields. In contrast, periodic arrays of nanoholes formed in metal films, most known for their ability to provide wavelength-tuned enhanced transmission, show more similarities with conventional propagating surface plasmon resonance. However, common for both short-range ordered and periodic nanoholes formed in metal films is that the substrate is electrically conductive. Some of the possibilities that emerge from sensor templates that are both electrically conductive and plasmon active are discussed and illustrated using recent results on synchronized nanoplasmonic and quartz crystal microbalance with dissipation monitoring of supported lipid bilayer formation and subsequent biomolecular recognition reactions. Besides the fact that this combination of techniques provides an independent measure of biomolecular structural changes, it is also shown to contribute with a general means to quantify the response from nanoplasmonic sensors in terms of bound molecular mass. [ABSTRACT FROM AUTHOR]

This article summarizes our most recent contributions to the rapidly growing field of supported lipid assemblies with emphasis on current studies addressing both fundamental and applied aspects of supported lipid bilayer (SLB) and tethered lipid vesicles (TLVs) to be utilized in sensing applications. The new insights obtained from combining the quartz crystal microbalance with dissipation monitoring technique with surface plasmon resonance are described, and we also present recent studies in which nanoplasmonic sensing has been used in studies of SLBs and TLVs. To gain full control over the spatial arrangement of TLVs in both two and three dimensions, we have developed a method for site-selective and sequence-specific sorting of DNA-tagged vesicles to surfaces modified with complementary DNA. The combination of this method with nanoplasmonic sensing formats is covered as well as the possibility of using DNA-modified vesicles for the detection of unlabeled DNA targets on the single-molecule level. Finally, a new method for membrane fusion induced by hybridization of vesicle-anchored DNA is demonstrated, including new results on content mixing obtained with vesicle populations encapsulating short, complementary DNA strands. [ABSTRACT FROM AUTHOR]