Search

Alzheimer's disease (AD) is a common neurodegenerative disorder in elderly people, and is associated with a heavy financial burden on our society. The use of serologic biomarkers is an attractive method to diagnose AD. Although the determination of blood-based biomarkers for AD has been explored in many studies, few practical diagnosis methods have been used in the clinic. In this work, we constructed a "chemical tongue" sensor array that is easy to use and based on four kinds of fluorescent gold nanoclusters (Au NCs) for discriminating between multiple proteins at nanomolar concentrations. The device utilizes a linear discrimination analysis based on fluorescence intensity response patterns. Using this chemical tongue sensor array, multiple proteins can be confidently identified even in complex biological systems, such as human urine. Most importantly, sera of AD patients could be effectively discriminated from those of osteoarthritis patients, or of healthy people. Also, the results obtained for the AD patients by the chemical tongue sensor array were validated by CSF determination. We conclude that the chemical tongue sensor array manufactured in this work paves the way for designing an auxiliary diagnosis method for AD that is less invasive and more convenient for the large-scale screening of patients., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Multiplex assays for autoantibodies have shown utility both in research towards understanding the basic biology of autoimmune disease, and as tools for clinical diagnosis. New label-free multiplex analysis methods have the potential to streamline both the process of assay development and assay workflow. We report fabrication and testing of a 5-plex autoantigen microarray using the Arrayed Imaging Reflectometry (AIR) platform. This label-free technology provides rapid, sensitive, and quantitative detection of an arbitrary number of analytes in a standard multiwell format. In this work, we demonstrate that AIR is able to detect antibodies to Ro60, La/SSB, Scl-70, BicD2, and Ro52 in single-donor human serum samples with multiplex results comparable to singleplex ELISA or Luminex assays., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Glass slides coated with a poly(methyl methacrylate) layer and plasma micro-nanotextured to acquire 3D topography (referred as 3D micro-nanotextured slides) were evaluated as substrates for biomolecule microarrays. Their performance is compared with that of epoxy-coated glass slides. We found that the proposed three-dimensional (3D) slides offered significant improvements in terms of spot intensity, homogeneity, and reproducibility. In particular, they provided higher spot intensity, by a factor of at least 1.5, and significantly improved spot homogeneity when compared to the epoxy-silane coated ones (intra-spot and between spot coefficients of variation ranging between 5 and 15% for the 3D micro-nanotextured slides and between 25 and 85% for the epoxy-silane coated ones). The latter was to a great extent the result of a strong "coffee-ring" effect observed for the spots created on the epoxy-coated slides; a phenomenon that was severely reduced in the 3D micro-nanotextured slides. The 3D micro-nanotextured slides offered in addition higher signal to noise ratio values over a wide range of protein probe concentrations and shelf-life over one year without requirement for specific storage conditions. Finally, the protocols employed for protein probe immobilization were extremely simple., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Analysis of serum proteome by antibody microarray is used to identify novel biomarkers and to study signaling pathways including protein phosphorylation and protein-protein interactions. Labeling of serum proteins is important for optimal performance of the antibody microarray. Proper choice of fluorescent label and optimal concentration of protein loaded on the microarray ensure good quality of imaging that can be reliably scanned and processed by the software. We have optimized direct serum protein labeling using fluorescent dye Arrayit Green 540 (Arrayit Corporation, USA) for antibody microarray. Optimized procedure produces high quality images that can be readily scanned and used for statistical analysis of protein composition of the serum., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Fluorescence-encoded magnetic microbeads (FEMMs), with the fluorescence encoding ability of quantum dots (QDs) and magnetic enrichment and separation functions of Fe3O4 nanoparticles, have been widely used for multiple biomolecular detection as microfluidic protein chip supports. However, the preparation of FEMMs with long-term fluorescent encoding and immunodetection stability is still a challenge. In this work, we designed a novel high-temperature chemical swelling strategy. The QDs and Fe3O4 nanoparticles were effectively packaged into microbeads via the thermal motion of the polymer chains and the hydrophobic interaction between the nanoparticles and microbeads. The FEMMs obtained a highly uniform fluorescent property and long-term encoding and immunodetection stability and could be quickly magnetically separated and enriched. Then, the QD-encoded magnetic microbeads were applied to alpha fetoprotein (AFP) detection via sandwich immunoreaction. The properties of the encoded microspheres were characterized using a self-designed detecting apparatus, and the target molecular concentration in the sample was also quantified. The results suggested that the high-performance FEMMs have great potential in the field of biomolecular detection., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this paper, a novel highly sensitive chemiluminescence immune-affinity 96 spots monolith array was developed to detect deoxynivalenol (DON), zearalenone (ZEN), T-2 toxin (T-2), and fumonisin B1 (FB1) in corn samples. Firstly, the monolith array was prepared through on suit UV-initiated copolymerization using polyethylene glycol diacrylate (PEGDA) as cross-linker, glycidyl methacrylate (GMA) as functional monomer and polyethylene glycol 200 (PEG 200) as the porogen. Subsequently, the four mycotoxins immune-affinity monolith array was prepared by immobilization of DON, ZEN, T-2, and FB1 antibody. The mole ratio of PEGDA/GMA, UV exposure time, and the volume ratio of PEG 200/PEGDA were optimized to improve the performances of the immune-affinity monolith array. For the mycotoxins immune-affinity monolith array based on chemiluminescence detection, the limit of detection was 0.0036ng/mL (DON), 0.0048ng/mL (ZEN), 0.0039ng/mL (T-2), and 0.0017ng/mL (FB1), respectively. The linear response in the range of 0.01-0.1ng/mL (R(2)=0.98). The results showed that the proposed four mycotoxins immune-affinity monolith array was a stable, accurate, and highly sensitive method to determine levels of DON, ZEN, T-2, and FB1 in real samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Conventional 2-D microarray is known to have high-throughput detection capability; however, the sensing spots density is significantly hindered by the spot-to-spot distance (gap) requirement for eliminating cross-talks between adjacent spots. Herein a new conceptual 3-D microarray device is proposed to significantly improve the spots density. To demonstrate advantages of the 3-D array, a microfabrication-free fluidic immunoassay device is further made by simply coupling an antibodies-arrayed glass cuboid into a circular glass tube. Rapid, sensitive and high-throughput flow-through immunoassays were accomplished with the 3-D array-based device for detection limits of 10-100 pg mL(-1) and wide dynamic range over 4-5 orders of magnitude in human serum with cancer biomarkers α-fetoprotein (AFP) and carcinoembryonic antigen (CEA) as model targets, holding great promise for practical clinical applications. The 3-D microarray device not only significantly increases the density of sensing spots, but also greatly enhances the mass transport for rapid immunoassay when using in a flow-through device., (Copyright © 2015 Elsevier B.V. All rights reserved.)

An immunodiagnostic lab-on-a-bead suspension microarray based on microbeads encoded with quantum dots (QDs) has been developed and preclinically validated for multiplexed quantitative detection of prostate cancer markers in human serum samples. The sensitivity and specificity of the microarray are similar to those of "gold-standard" single-analyte ELISA. Moreover, the array has an improved immunoassay capacity, ensures quantitative detection of multiple cancer biomarkers and may be operational in a considerably wider dynamic range of concentrations. The array is characterized by reduced time and cost of analysis and is compatible with classical flow cytometers. Proof-of-concept preclinical tests ensured simultaneous quantitative determination of free and total prostate-specific antigens in human serum, with clear discrimination between the control and clinical samples. The proposed approach is flexible and paves the way to development of a wide variety of immunodiagnostic assays for multiplexed early diagnosis of various diseases., From the Clinical Editor: Early diagnosis of cancer can result in better prognosis for patients. Thus, the use of specific tumor markers is widely employed in clinical practice. Traditional screening methods only employ single markers. The authors here developed a microarray system based on microbeads encoded with quantum dots (QDs), which can be used for multiplexed quantitative detection. The validated results on patient samples should lead to the development of a wider variety of assays for other diseases., (Copyright © 2015 Elsevier Inc. All rights reserved.)

The principle of immobilized metal affinity chromatography (IMAC) has been recently implemented for protein microarrays for the study of protein abundance and function. Ni-Co film fabricated by electrodeposition is a novel microarray surface in an alloy type for immobilizing histidine-tagged proteins based on IMAC. In this paper, the effects of crystallographic structures and surface properties of Ni-Co coatings, with and without the annealing process, on the immobilization of histidine-tagged proteins were systematically investigated. The experimental results reveal that the stronger hcp texture, due to a higher Co content, results in better affinity adsorption for histidine-tagged biotin. Nevertheless, the allotropic phase transformation from hcp to fcc, due to the annealing process, leads to the decrease of affinity adsorption. The wettability property and the surface roughness of Ni-Co coating are, however, not important factors. Obviously, the crystallographic structure of Ni-Co coating is the dominant factor for the specific affinity adsorption of histidine-tagged protein., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The distribution of inkjet-printed biomolecules in porous nitrocellulose substrates often results in a non-homogeneous spot morphology commonly referred to as 'doughnut-shaped' spots. We have studied the influence of Pluronic F127 (an amphiphilic surfactant) on the functionality of inkjet-printed primary antibody molecules and on the final assay result by performing a one-step antibody binding assay in the nitrocellulose substrate. The primary antibody was printed with and without Pluronic, followed by the addition of double-labelled amplicons as antigen molecules and a fluorophore-labelled streptavidin as detection conjugate. The distribution of the fluorescence intensity down into the nitrocellulose substrate was investigated by confocal laser scanning microscopy in 'Z' stacking mode. Each horizontal slice was further analysed by applying a concentric ring format and the fluorescence intensity in each slice was represented in a colour-coded way. The mean and total fluorescence intensity of the antibody binding assay (fluorescent streptavidin) showed a peak at 0.2% (w/v) Pluronic F127. In addition, an improved spot morphology was observed also peaking at the same Pluronic concentration. Subsequently, we investigated the direct influence of Pluronic F127 on the location of the primary antibody molecules by labelling these molecules with the fluorophore Alexa-488. Our results show that upon increasing the concentration of Pluronic F127 in the printing buffer, the spot diameter increased and the number of primary antibody molecules bound in the spot area gradually decreased. This was confirmed by analysing the distribution of fluorescently labelled primary antibody molecules down into the membrane layers. We conclude that a particular ratio between primary antibody and Pluronic F127 molecules in combination with available substrate binding capacity results in an optimal orientation, that is Fab-UP, of the primary antibody molecules. Consequently, an increased number of antigen molecules (in our case the labelled amplicons) and of the fluorescent detection conjugate (streptavidin) will give an optimal signal. Moreover, distribution of the primary antibody molecules was more homogeneous at the optimal Pluronic F127 concentration, contributing to the better spot morphology observed., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Background: Autoantibodies against platelet glycoproteins (GPs) play an important role in immune thrombocytopenic purpura (ITP). This study was to develop an improved flow cytometric immunobead array (FCIA) assay to detect platelet autoantibodies in ITP patient plasma., Methods: Plasma samples were isolated from 71 ITP patients and 136 non-ITP controls and incubated with platelets from normal individuals. After washing, platelets were lysed and the platelet lysates were incubated with polystyrene microbeads coupled with monoclonal antibodies against human GPs IX (SZ1), Ib (SZ2), IIIa (SZ21), IIb (SZ22), and P-selectin (SZ51). Platelet GP-autoantibody complexes were detected by flow cytometry using a FITC-labeled secondary antibody., Result: Autoantibodies against platelet GPIb, GPIIb, GPIIIa, GPIX and P-selectin were detected in plasma from ITP patients, as indicated by high mean fluorescent intensity values when microbeads with antibodies SZ1, SZ2, SZ21, SZ22, and SZ51 were used. In ROC analysis, values of the area under the curve were 0.74, 0.83, 0.80, 0.79 and 0.87, respectively. Compared with the previously reported assays, this new FCIA eliminated the need of isolating platelets from ITP patients without compromising assay sensitivity and accuracy in predicting ITP., Conclusion: This simplified FICA assay may be more suitable for ITP diagnosis in clinical laboratory settings., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Although the crystalline S-layer arrays that form the exoskeleton of many archaea and bacteria have been studied for decades, a long-awaited crystal structure coupled with a growing understanding of the S-layer assembly process are injecting new excitement in the field. The trend is amplified by computational strategies that allow for in silico design of protein building blocks capable of self-assembling into 2D lattices and other prescribed quaternary structures. We review these and other recent developments toward achieving unparalleled control over the geometry, chemistry and function of protein-based 2D objects from the nanoscale to the mesoscale., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Low-density protein microarrays are emerging tools in diagnostics whose deployment could be primarily limited by the cost of fluorescence detection schemes. This paper describes an electrical readout system of microarrays comprising an array of gold interdigitated microelectrodes and an array of polydimethylsiloxane microwells, which enabled multiplexed detection of up to thirty six biological events on the same substrate. Similarly to fluorescent readout counterparts, the microarray can be developed on disposable glass slide substrates. However, unlike them, the presented approach is compact and requires a simple and inexpensive instrumentation. The system makes use of urease labeled affinity reagents for developing the microarrays and is based on detection of conductivity changes taking place when ionic species are generated in solution due to the catalytic hydrolysis of urea. The use of a polydimethylsiloxane microwell array facilitates the positioning of the measurement solution on every spot of the microarray. Also, it ensures the liquid tightness and isolation from the surrounding ones during the microarray readout process, thereby avoiding evaporation and chemical cross-talk effects that were shown to affect the sensitivity and reliability of the system. The performance of the system is demonstrated by carrying out the readout of a microarray for boldenone anabolic androgenic steroid hormone. Analytical results are comparable to those obtained by fluorescent scanner detection approaches. The estimated detection limit is 4.0 ng mL(-1), this being below the threshold value set by the World Anti-Doping Agency and the European Community., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In protein research, protein microarray facilitates high-throughput study of protein abundance and function. An appropriate microarray surface that can be used to immobilize protein samples is a prerequisite for the investigation of molecular interactions. Ni-Co alloy coated protein microarray chip has been found to adsorb histidine-tagged proteins effectively based on the method of immobilized metal affinity chromatography. Due to the ingredient of bi-metallic elements, different electroplating conditions resulted in distinct binding affinities. Therefore, the influence of Ni-Co material properties on the immobilization of histidine-tagged protein was systematically investigated in this study. In the experiments, the contact angle measurement suggested that no strong relationship can be established between the wettability of chip surface and its corresponding protein immobilization. ESCA test demonstrated that the major ingredients of the Ni-Co alloy coated protein microarray chip were Ni and Co. In addition, the XRD test concluded that a Ni-Co protein chip that consists mostly of hcp lattice has better binding capability. SEM micrographs provide direct image evidence. These material tests summarize that the Ni-Co alloy coated protein microarray chip adsorbs His-tagged proteins through its surface morphology. Therefore, it can provide specific binding due to the affinity adsorption between the intermediate metals and the protein., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Plasma immersion ion implantation (PIII) modifies the surface properties of polymers, enabling them to covalently immobilize proteins without using linker chemistry. We describe the use of PIII treated polycarbonate (PC) slides as a novel platform for producing microarrays of cluster of differentiation (CD) antibodies. We compare their performance to identical antibody microarrays printed on nitrocellulose-coated glass slides that are currently the industry standard. Populations of leukocytes are applied to the CD microarrays and unbound cells are removed revealing patterns of differentially immobilized cells that are detected in a simple label-free approach by scanning the slides with visible light. Intra-slide and inter-slide reproducibility, densities of bound cells, and limits of detection were determined. Compared to the nitrocellulose-coated glass slides, PIII treated PC slides have a lower background noise, better sensitivity, and comparable or better reproducibility. They require three-fold lower antibody concentrations to yield equivalent signal strength, resulting in significant reductions in production cost. The improved transparency of PIII treated PC in the near-UV and visible wavelengths combined with superior immobilization of biomolecules makes them an attractive platform for a wide range of microarray applications., (Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.)

The construction of crystalline arrays allows proteins to be presented in a dense, oriented and functional way that also facilitates determination of their structure. Rational design of these supramolecular structures is becoming increasingly tractable with recent successes exploiting both innate protein symmetry and advances in protein–protein interface design. Pre-existing symmetry minimizes the number of non-native interfaces that must be produced, and the use of symmetric interfaces facilitates protein alignment. Arrays in which metal coordination or peptide binding are responsible for the inter-particle associations show particular promise due to the malleable and reversible nature of these interactions. Cross-pollination of the principles that underlie successful strategies is likely to produce rapid advances in this field and consequent benefits to both nanotechnology and structural biology.

Enriching the surface density of immobilized capture antibodies enhances the detection signal of antibody sandwich microarrays. In this study, we improved the detection sensitivity of our previously developed P-Si (porous silicon) antibody microarray by optimizing concentrations of the capturing antibody. We investigated immunoassays using a P-Si microarray at three different capture antibody (PSA - prostate specific antigen) concentrations, analyzing the influence of the antibody density on the assay detection sensitivity. The LOD (limit of detection) for PSA was 2.5 ng mL(-1), 80 pg mL(-1), and 800 fg mL(-1) when arraying the PSA antibody, H117 at the concentration 15 μg mL(-1), 35 μg mL(-1), and 154 μg mL(-1), respectively. We further investigated PSA spiked into human female serum in the range of 800 fg mL(-1) to 500 ng mL(-1). The microarray showed a LOD of 800 fg mL(-1) and a dynamic range of 800 fg mL(-1) to 80 ng mL(-1) in serum spiked samples., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Self-assembled monolayers (SAMs) formed by adsorption of octadecylphosphonic acid (ODPA) on zirconium mediated glass substrates were prepared. In this sandwich structure, Zr(4+) was used as a bi-linker to bind phosphonic acid head group in ODPA to glass substrates. The contact angle of the as-prepared SAMs was measured to be around 104°. X-ray photoelectron spectroscopy (XPS) characterization indicated the modification of Zr(4+) on glass substrates was critical for the formation of reasonably dense, well-ordered SAMs similar in quality to those typically formed on other metal oxide surfaces. Bifunctional molecule, 10-mercaptodecanylphosphonic acid (MDPA), bearing thiol terminal groups for various chemical reactions, was synthesized and formed SAMs on glass using the same approach, which allowed us to control the surface chemistry and functionality through photooxidation of the thiol terminal group. Photopatterning of proteins was performed first by exposing the SAMs to UV light through a mask, followed by protein immobilization to the masked regions through a heterobifunctional linker, while the exposed areas prohibit nonspecific protein absorption. The present strategy, which combined the SAMs assembly and photolithography, offered a facile approach for the fabrication of biomolecule patterning and could be applied to construction of biochips and other applications., (Copyright © 2013 Elsevier B.V. All rights reserved.)

We have developed a technique to create 50μm-deep microwells coated with a reactive and robust thin film, which withstands photolithographic processing, and allows for subsequent chemical functionalisation with biological cues (i.e. peptides). First, plasma polymerisation of 1-bromopropane was used to generate a bromine-functionalised thin film (BrPP) on a substrate of silicon wafer. Second, an epoxy functionalised polymer UV photoresist, SU-8, was deposited and developed to create 50μm-deep patterned microwells that display the BrPP coating at their base. Third, amino acids or peptides were selectively attached to the bottom of the microwells through bromine displacement by an amine or thiol nucleophile. Each surface functionalisation step was monitored by XPS, AFM, and contact angle measurements. These functionalities were then used as linkers to immobilise enzymes (e.g. HRP), which retain activity at the end of the process as shown by a biochemical activity assay. Peptide promoters of cell attachment were also immobilised and their functionality was evaluated using an L929 fibroblast adhesion assay. In conclusion, this work describes an innovative combination of plasma thin film deposition and photolithography to create 50μm-deep functionalised microwells for peptide display in biological applications., (Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.)

A promising pathway to improve on the sensitivity of protein microarrays is to immobilize the capture antibodies in a three dimensional hydrogel matrix. We describe a simple method based on printing of an aqueous protein solution containing a photosensitive polymer and the capture antibody onto a plastic chip surface. During short UV-exposure photocrosslinking occurs, which leads to formation of a hydrogel, which is simultaneously bound to the substrate surface. In the same reaction the antibody becomes covalently attached to the forming hydrogel. As the capture antibodies are immobilized in the three-dimensional hydrogel microstructures, high fluorescence intensities can be obtained. The chip system is designed such, that non-specific protein adsorption is strongly prevented. Thus, the background fluorescence is strongly reduced and very high signal-to-background ratios are obtained (SBR>6 for c(BSA)=1 pM; SBR>100 for c(BSA)>100 pM). The kinetics of antigen binding to the arrayed antibodies can be used to determine the concentration of a specific protein (for example the tumor marker β2-microglobulin) in solution for a broad range of analyte concentrations. By varying size and composition of the protein-filled hydrogel microstructures as well as adjusting the extent of labeling it is possible to easily adapt the surface concentration of the probe molecules such that the fluorescence signal intensity is tuned to the prevalence of the protein in the analyte. As a consequence, the signal tuning allows to analyze solutions, which contain both proteins with high (here: upper mg mL(-1) range) and with very low concentrations (here: lower μg mL(-1) range). This way quantitative analysis with an exceptionally large dynamic range can be performed., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The accuracy of antibody-based microarrays depends on eliminating or at least minimizing the effect of cross-reactive components. In this work, a method to create a versatile, compartmentalized storage system for antibodies and soluble microarray reagents is described. These containers are made of hydrogel plugs immobilized on a slide facing the corresponding sub-array on a printed surface. The hydrogels were polymerized using a 4% w/v N,N-dimethylacrylamide and 3% w/v bisacrylamide solution, thus generating large pore sizes to allow the facile transfer of intact, functional biomolecules. The hydrogel microenvironments can be desiccated and rehydrated with a desired solution, and they can store reagents in a dry form. These hydrogels were shown to provide limits of detection similar to those obtained by conventional incubation conditions in an assay for HIV p24 antigen. Moreover, they prevent cross-reactivity issues in the detection of Staphylococcus aureus enterotoxins A and B and promote the accurate quantification of interleukin 10 by a microarray-integrated calibration curve., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Proteins are fundamental components of all living systems and critical drivers of biological functions. The large-scale study of proteins, their structures and functions, is defined as proteomics. This systems-wide analysis leads to a more comprehensive view of the intricate signaling transduction pathways that proteins engage in and improves the overall understanding of the complex processes supporting the living systems. Over the last two decades, the development of high-throughput analytical tools, such as microarray technologies, capable of rapidly analyzing thousands of protein-functioning and protein-interacting events, has fueled the growth of this important field. Herein, we review the most recent advancements in microarray technologies, with a special focus on peptide microarray, small molecule microarray, and protein microarray. These technologies have become prominent players in proteomics and have made significant changes to the landscape of life science and biomedical research. We will elaborate on their performance, advantages, challenges, and future directions., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

We report a simple and sensitive method for label-free detection of single-stranded DNA-binding protein (SSBP) based on an array of microfabricated cantilevers. The single-stranded DNA (ssDNA) was immobilized on the surface of the sensing cantilevers to detect SSBP, while the reference cantilevers were modified with 6-mercapto-1-hexanol to detect any unwanted cantilever deflection. The differential deflection signals that reveal specific SSBP-ssDNA binding have been found to depend on the SSBP concentration. Using the cantilever array sensor we can detect SSBP in the concentration range from 0.01 to 7 μg mL(-1). Other proteins, such as thrombin or bovine serum albumin induced no significant deflection of the cantilevers. Our results show the potential for the application of cantilever array sensor system as a powerful tool to detect proteins with high sensitivity and specificity., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The use of antibody-based diagnostic testing has increased significantly over the past decade, giving rise to a wide range of diagnostic devices. At one end of the cost-range are rapid inexpensive point-of-care tests based on immunochromatographic strips which provide a qualitative positive or negative test outcome. On the other hand, quantitative tests generally require the use of dedicated and expensive laboratory instruments. There remains a need for diagnostic instruments and tests that can provide quantitative assessment of disease markers at low cost. This paper describes the development of a novel low cost optical device for reading colorimetric and fluorescent immunodiagnostic test results. This portable instrument uses a webcam to capture test results from a specially designed 16-well slide containing a miniaturized array of test spots. Arrays are illuminated with either LEDs or lasers, while transmitted or emitted light is captured through a long-pass filter, allowing two different types of optical measurement to be performed within the same device. This device was used to read results from an array of antibodies conjugated with either an enzymatic or fluorescent tag resulting in a colored or fluorescent readout., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Producing high quality protein microarrays on inexpensive substrates like polystyrene is a big challenge in the field of diagnostics. Using a non-contact inkjet printer we have produced microarrays on polystyrene slides for two different biotinylated biomolecules, bovine serum albumin (BSA-biotin) and immunoglobulin-G (IgG-biotin), and studied the influence of buffer (composition and pH) on the spot morphology and signal intensity. Atomic force microscopy revealed the morphological pattern of the (biomolecule) spots printed from phosphate buffer (pH 7.4), phosphate buffered saline (pH 7.4) and carbonate buffer (pH 9.6). The spots showed an irregular crust-like appearance when printed in phosphate buffered saline (pH 7.4), mainly due to the high NaCl content, whereas spots of biomolecules printed in carbonate buffer (pH 9.6) showed a smooth morphology. In addition, the rinsing of these dried spots led to the loss of a considerable fraction of the biomolecules, leaving behind a small fraction that is compatible with the (mono)layer. It was confirmed by confocal laser microscopy that the quality of the spots with respect to the uniformity and distribution of the biomolecules therein was superior when printed in carbonate buffer (pH 9.6) as compared to other buffer systems. Particularly, spotting in PBS yielded spots having a very irregular distribution and morphology., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Reflectometric interference spectroscopy (RIfS) is a label-free, time-resolved technique, and suitable for detecting antibody-antigen interaction. This work describes a continuous flow biosensor for C-reactive protein (CRP), involving an effective immobilization method of a monoclonal antibody against CRP (anti-CRP) to achieve highly sensitive RIfS-based detection of CRP. The silicon nitride-coated silicon chip (SiN chip) for the RIfS sensing was first treated with trimethylsilylchloride (TMS), followed by UV-light irradiation to in situ generation of homogeneous silanols on the surface. Following amination by 3-aminopropyltriethoxysilane, carboxymethyldextran (CMD) was grafted, and subsequently, protein A was immobilized to create the oriented anti-CRP surface. The immobilization process of protein A and anti-CRP was monitored with the RIfS system by consecutive injections of an amine coupling reagent, protein A and anti-CRP, respectively, to confirm the progress of each step in real time. The sensitivity was enhanced when all of the processes were adopted, suggesting that the oriented immobilization of anti-CRP via protein A that was coupled with the grafted CMD on the aminated surface of TMS-treated SiN chip. The feasibility of the present sensing system was demonstrated on the detection of CRP, where the silicon-based inexpensive chips and the simple optical setup were employed. It can be applied to other target molecules in various fields of life science as a substitute of surface plasmon resonance-based expensive sensors., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Nanospheres lithographic (NSL) method has been used to fabricate nano-structured arrays (NAs) of hexagonally close-packed gold (Au) using polystyrene beads [PS, diameter ∼300 nm] as mask. The developed NA was incorporated with a customized and cheap microfluidics system to demonstrate its applicability as an alternative easy and efficient platform for multiplex analysis and Lab-on-a-Chip applications. The chip functionality was demonstrated with horseradish peroxidase (HRP) and anti-HRP antibody as model for recognition system. The enzyme-linked immunosorbent assay (ELISA) performed on fabricated protein biochip had a detection limit 100 pg/mL for HRP. The antibody chip was also checked for the shelf-life and it was found that these chips could be stored for 50 days when stored at 4°C without any significant loss of activity. Therefore, NAs based protein biochip with the correct microfluidics could find huge potential application in diagnostics and biosensing technology., (Copyright © 2012 Elsevier Inc. All rights reserved.)

A simple method by combined molecular self assembly and surface-initiated atom transfer radical polymerization (SI-ATRP) was proposed to prepare a biologically inert surface for micropatterning active proteins. The MPEG microdomains having a short terminal poly(ethylene glycol) (PEG) unit were prepared by self assembly of 2-(methyoxy(polyethylenoxy) propyl)trimethoxy silane (MPEG-silane). The remaining local regions or poly(poly(ethylene glycol)methyl ether methacrylate-co-glycidyl methacrylate) (P(PEGMEMA-co-GMA)) microdomains were produced via SI-ATRP of PEGMEMA and GMA comonomers. The epoxy groups of the P(PEGMEMA-co-GMA) microdomains were used directly for covalent coupling of an active protein (human immunoglobulin or IgG) via the ring-opening reaction to produce the IgG-coupled microdomains. The IgG-coupled microdomains interact only and specifically with target anti-IgG, while the other antifouling microregions from self-assembled monolayers with short terminal PEG units effectively prevent specific and non-specific protein fouling. When extended to other active biomolecules, microarrays for specific and non-specific analyte interactions with a high signal-to-noise ratio could be readily tailored., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Lectins are the proteins which can distinguish glycosylation patterns. They are frequently used as biomarkers for progressions of several diseases including cancer. As the lectin microarray based prognosis devices miniaturize the process of glycoprofiling, it is anticipated that their performance can be augmented by integration with microfluidic framework. This is analogous to microfluidics based DNA arrays. However, unlike small oligonucleotide microarrays, it remains uncertain whether the binding reaction-kinetic parameters can be considered invariant of imposed hydrodynamics, for relatively larger and structure sensitive molecules such as lectins. Here we show, using two standard lectins namely Concanavalin A and Abrus Agglutinin, that the steady state binding efficiency unexpectedly declines beyond a critical shear rate magnitude. This observation can be explained only if the associated reaction constants are presumed to be functions of hydrodynamic parameters. We methodically deduce the shear rate dependence of association and dissociation constants from the comparison of experimental and model-simulation trends. The aforementioned phenomena are perceived to be the consequences of strong hydrodynamic perturbations, culminating into molecular structural distortion. The exploration, therefore, reveals a unique coupling between reaction kinetics and hydrodynamics for biomacromolecules and provides a generic scheme towards futuristic microfluidics-coupled biomedical assays., (Copyright © 2011 Elsevier B.V. All rights reserved.)

We have developed a fibrinogen-specific sandwich enzyme-linked immunosorbent assay (ELISA) microarray assay for use in qualitatively distinguishing between blood plasma and serum samples. Three capture antibodies (49D2, HPA001900, and F8512) were evaluated in conjunction with 1D6 as the detection antibody. The data show that 49D2 and (to a lesser extent) F8512 successfully identify previously unknown plasma and serum samples based on approximately a 28-fold difference in signal intensity between the sample types. This assay has utility in rapidly identifying previously archived clinical samples with incomplete annotation in a high-throughput manner prior to proteomic analyses., (Copyright © 2011 Elsevier Inc. All rights reserved.)

A novel kind of hydrophilic monolith based immobilized enzyme reactors (IMERs) was prepared both in UV-transparent capillaries and on glass microchips by the photopolymerization of N-acryloxysuccinimide and poly(ethylene glycol)diacrylate, followed by trypsin immobilization. The performance of capillary IMERs for protein digestion was evaluated by the digestion of myoglobin with the residential time from 12s to 71 s. With μRPLC-ESI-MS/MS analysis, the obtained sequence coverages were all over 80%, comparable to that obtained by in-solution digestion for 12 h. The nonspecific absorption of BSA on monolithic support was evaluated, and no obvious protein residue was observed by a fluorescence assay. Moreover, no carry-over of the digests on the capillary IMER was found after the digestion of myoglobin (24 μg) and BSA (9 μg), which further demonstrated the good hydrophilicity of such matrix. In addition, an integrated microchip-based system involving on-line protein digestion by microchip-based IMER, peptides separation by nanoRPLC and identification by ESI-MS/MS was established, by which a mixture of standard proteins and one RPLC fraction of Escherichia coli extract were successfully identified, indicating that the hydrophilic monolith based IMER might provide a promising tool for high-throughput proteomic analysis., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The problems that have been associated with protein multiplex microarray immunoassay substrates and existing technology platforms include: binding, sensitivity, a low signal to noise ratio, target immobilization and the optimal simultaneous detection of diverse protein targets. Current commercial substrates for planar multiplex microarrays rely on protein attachment chemistries that range from covalent attachment to affinity ligand capture, to simple adsorption. In this pilot study, experimental performance parameters for direct monoclonal mouse IgG detection were compared for available two and three-dimensional slide surface coatings with a new colloidal nitrocellulose substrate. New technology multiplex microarrays were also developed and evaluated for the detection of pathogen-specific antibodies in human serum and the direct detection of enteric viral antigens. Data supports the nitrocellulose colloid as an effective reagent with the capacity to immobilize sufficient diverse protein target quantities for increased specific signal without compromising authentic protein structure. The nitrocellulose colloid reagent is compatible with the array spotters and scanners routinely used for microarray preparation and processing. More importantly, as an alternate to fluorescence, colorimetric chemistries may be used for specific and sensitive protein target detection. The advantages of the nitrocellulose colloid platform indicate that this technology may be a valuable tool for the further development and expansion of multiplex microarray immunoassays in both the clinical and research laboratory environment., (Copyright © 2010 Elsevier B.V. All rights reserved.)

In this paper, we propose an effective protocol for bacterial detection using antibody microarray-based strategies with gold nanoparticle probes. In this approach, bacteria are captured by immobilized IgGs on the microarray spots. The capturing events are marked by attachment of lectin (e.g. Ricinus Communis Agglutini (RCA) and Concanavalin A (ConA)) conjugated gold nanoparticles followed by silver deposition for signal enhancement. The detection principle is resonance light scattering (RLS). Using this technique, highly selective discrimination of bacterial strain types (i.e., gram-negative, gram-positive and fungus) down to 10(3) cells per assay with a dynamic range of nearly three orders of magnitude are demonstrated. In addition, the capturing process can be inhibited by lipopolysaccharides (LPS), which gives further evidence of the binding mechanism. Furthermore, antibacterial assay with antibacterial drugs (amoxicillin and vancomycin) demonstrates that the approach enables to detect antibacterial efficiency as well as derive MIC (minimum inhibitory concentration) plots.

Metal-binding peptides have attracted attention for their usefulness in biomineralization processes. In this work screening of high affinity peptides against ZnO was performed using a combinatorial library approach with a peptide array and computational analysis. The computationally assisted peptide screening and design enabled identification of linear peptides with affinity for ZnO with limited experimentation. Starting with the screening data obtained from a random 6-mer library of 420 sequences, the characteristics of the peptides with high ZnO affinity were analyzed using a fuzzy neural network algorithm by comparison of high and low affinity peptides. Three physical properties of amino acids (hydrophobicity, isoelectric point and size) and positional information of each residue were analyzed and a peptide rule with restricted amino acids at certain positions was extracted. The average affinity for ZnO increased 2.0-fold when 300 sequences were synthesized according to the restricted random library, compared with the non-restricted library. In addition, for a peptide library with the amino acids at the restricted sites exchanged the average binding capacity decreased to 0.7-fold. Interestingly, the peptides with high ZnO affinity obtained exhibited binding specificity for ZnO. Computationally assisted screening is an invaluable means for finding peptides with limited experimentation., (Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Blood-based protein biomarkers hold great promise to advance medicine with applications that detect and diagnose diseases and aid in their treatment. We are developing such applications with our proteomics technology that combines high-content with low limits of detection. Biomarker discovery relies heavily on archived blood sample collections. Blood is dynamic and changes with different sampling procedures potentially confounding biomarker studies. In order to better understand the effects of sampling procedures on the circulating proteome, we studied three sample collection variables commonly encountered in archived sample sets. These variables included (1) three different sample tube types, PPT plasma, SST serum, and Red Top serum, (2) the time from venipuncture to centrifugation, and (3) the time from centrifugation to freezing. We profiled 498 proteins for each of 240 samples and compared the results by ANOVA. The results found no significant variation in the measurements for most proteins (approximately 99%) when the two sample processing times tested were 2h or less, regardless of sample tube type. Even at the longest timepoints, 20 h, approximately 82% of the proteins, on average for the three collection tube types, showed no significant change. These results are encouraging for proteomic biomarker discovery., ((c) 2009. Published by Elsevier B.V.)

We present the first single-chip array of integrated NMR receivers for parallel spectroscopy and imaging. The array, optimized for operation at 300 MHz, is composed of eight separate channels, with each channel consisting of a detection coil, a tuning capacitor, a low noise amplifier and a 50 ohm buffer. As all the integrated electronics are placed underneath the reception coils, the array is densely packed. Each single-channel reception coil has a diameter of 500 microm, resulting in a total active area of 1 mm by 2 mm for the array. The (1)H time-domain spin sensitivity of a single channel is approximately 1x10(15) spins/square root(Hz).

Although many methods exist to study the recognition and signaling properties of proteins in isolation, it remains a challenge to perform these investigations on a system-wide or proteome-wide scale and within the context of biological complexity. Protein microarray technology provides a powerful tool to assess the selectivity of protein-protein interactions in high-throughput and to quantify the abundances and post-translational modification states of many different proteins in complex mixtures. Here, we provide an overview of the various applications of protein microarray technology and compare the strengths and technical challenges associated with each approach. Overall, we conclude that if this technology is to have a substantial impact on our understanding of cell biology and physiology, increased emphasis must be placed on obtaining rigorously controlled quantitative data from protein function microarrays and on assessing the selectivity of reagents used in conjunction with protein-detecting microarrays.

Protein array technology has begun to play a significant role in the study of protein-protein interactions and in the identification of antigenic targets of serum autoantibodies in a variety of autoimmune disorders. More recently, this technology has been applied to the identification of autoantibody signatures in cancer. The identification of tumour-associated antigens (TAAs) recognised by the patient's immune response represents an exciting approach to identify novel diagnostic cancer biomarkers and may contribute towards a better understanding of the molecular mechanisms involved. Circulating autoantibodies have not only been used to identify TAAs as diagnostic/prognostic markers and potential therapeutic targets, they also represent excellent biomarkers for the early detection of tumours and potential markers for monitoring the efficacy of treatment. Protein array technology offers the ability to screen the humoral immune response in cancer against thousands of proteins in a high throughput technique, thus readily identifying new panels of TAAs. Such an approach should not only aid in improved diagnostics, but has already contributed to the identification of complex autoantibody signatures that may represent disease subgroups, early diagnostics and facilitated the analysis of vaccine trials.

Enthalpy arrays enable label-free, solution-based calorimetric detection of molecular interactions in a 96-detector array format. The combination of the small size of the detectors and the ability to perform measurements in parallel results in a significant reduction of sample volume and measurement time compared with conventional calorimetry. We have made significant improvements in the technology by reducing the temperature noise of the detectors and improving the fabrication materials and methods. In combination with an automated measurement system, the advances in device performance and data analysis have allowed us to develop basic enzyme assays for substrate specificity and inhibitor activity. We have also performed a full titration of 18-crown-6 with barium chloride. These results point to future applications for enthalpy array technology, including fragment-based screening, secondary assays, and thermodynamic characterization of leads in drug discovery.

The activation of caspase-3 plays an important role in the apoptotic process. In this study, we describe a novel method by which caspase-3-dependent proteolytic cleavage can be monitored, using a surface plasmon resonance (SPR) imaging protein chip system. To the best of our knowledge, this is the first report regarding the SPR imaging-based monitoring of caspase-3 activation. In order to evaluate the performance of this protocol, we constructed a chimeric caspase-3 substrate (GST:DEVD:EGFP) comprised of glutathione S transferase (GST) and enhanced green fluorescent protein (EGFP) with a specialized linker peptide harboring the caspase-3 cleavage sequence, DEVD. Using this reporter, we assessed the cleavage of the artificial caspase-3 substrate in response to caspase-3 using an SPR imaging sensor. The purified GST:DEVD:EGFP protein was initially immobilized onto a glutathionylated gold chip surface, and subsequently analyzed using an SPR imaging system. As a result, caspase-3 activation predicated on the proteolytic properties inherent to substrate specificity could be monitored via an SPR imaging system with a detection performance similar to that achievable by the conventional method, including fluorometric assays. Collectively, our data showed that SPR imaging protein chip system can be effectively utilized to monitor the proteolytic cleavage in caspase-3, thereby potentially enabling the detection of other intracellular protease activation via the alteration of the protease recognition site in the linker peptides.

Cellular responses are the consequence of complex reactions of protein networks. The complexity should ultimately be described by a set of formulas in a quantitative fashion, in which each formula defines the reactions in response to given types of input. However, testing these formulas has not been a simple task because of the lack of appropriate means for experimental validation. 'Reverse-phase' lysate microarrays have been proved to be powerful for such requirements and thus can be a good resource for providing an experimental reference point for the theoretical biology of protein networks.

Currently one of the most challenging tasks in biological and medical research is to explore and understand the function of all proteins encoded by the genome of an organism. A systematic approach based on the genome sequences is feasible because the full genome of many organisms presently is available and many more are underway. For the production of expression atlases different strategies are used. Early attempts to acquire information about protein expression levels have focused on the analysis of mRNA levels within different tissues and cell types. Recently, novel strategies to focus directly on protein levels have been developed. To assess global protein expression in a systematic and high-throughput manner, methods based on design of specific affinity ligands to recognize the proteins have been presented. By subsequently using these affinity molecules for detection of the corresponding proteins in a wide range of platforms, important information can be gained. This article focuses on strategies to profile protein levels and in particular the human protein atlas initiative and the use of microarray technologies.

Analytical polymeric microchips in both fluidic and array formats offer short analysis times, coupling of many sample processing and chemical reaction steps on one platform with minimal sample and reagent consumption, as well as low cost, minimal fabrication times and disposability. However, the invariable bulk properties of most commercial polymers have driven researchers to develop new modification strategies. This article critically reviews the scope and development of chemical modifications of such polymeric chips since 2003. Surface modifications were based on chemical derivatization or activation of surface layers with reagent solutions, reactive gases and irradiation. Bulk modification of polymer chips used newly incorporation of monomers with selective chemical functionalities throughout the bulk polymer material and integrated the chip modification and fabrication into a single step. Such modifications hold a great promise for establishing a true 'lab-on-chip' as can be seen from many novel applications for modulating electroosmosis, suppressing protein adsorption in microchip capillary electrophoretic separations, extraction of analytes and for zone-specific binding of enzymes and other biomolecules.

Protein nanoarrays containing integrin alphavbeta3 or BSA were fabricated on ProLinker-coated Au surface by dip-pen nanolithography (DPN). An atomic force microscope (AFM) tip coated with ProLinker was modified by vitronectin. We measured the interaction force between nanoarrayed integrin alphavbeta3 or BSA and immobilized vitronectin on the cantilever tip by employing tethering-unbinding method. The unbinding force between integrin alphavbeta3 and vitronectin (1087+/-62 pN) was much higher than that of between BSA and vitronectin (643+/-74 pN). These results demonstrate that one can distinguish a specific protein interaction from non-specific interactions by means of force measurement on the molecular interactions between the nanoarrayed protein and its interacting protein on the AFM tip.

The reproducibility of three-dimensional hydrogel surfaces based on polyurethane, poly(vinyl alcohol), and polyacrylamide (HydroGel) with respect to scanning mode (confocal vs nonconfocal), alignment (circular vs irregular), and influence of fluorescent background was investigated. It is demonstrated that, if even probe spots are provided, fluorescence intensities measured at the same photomultiplier tube gain are similar for confocal and nonconfocal scanning modes. Uneven probe spots, however, cause reduced fluorescence with confocal scanners, greater spot-to-spot variation, and higher degrees of intra- and interexperimental variability (%CV among three experiments). By using irregular instead of circular spot alignment, reproducibility (%CV) is improved for good- and bad-quality spots, in the latter case by up to three times as much. In addition, circularity can be used together with the mean-median correlation of pixel intensities as a quality measure.

Constant advancements in printing technology, informatics, surface modification strategies and peptide chemistries mean that peptide arrays have, like DNA arrays, become even more miniaturised and complex in terms of not only the numbers of peptides immobilised but also their lengths. As a result peptide-based arrays have become a powerful tool in the interrogation, examination and perturbation of a host of biological systems.

We have developed a modified microtiter plate which has following advantageous features and functions to both conventional microtiter plate and protein array, such as 1) use of conventional microtiter plate reader and washer, and 2) allowance of simultaneous reaction in the same liquid for all wells. Four proteins of human serum albumin, human C-reactive protein (CRP), human plasminogen and human MIP-1alpha as sample proteins, were measured with the modified microtiter plate. Although the reaction liquid of each wells on the modified microtiter plate shares through concave portion, its antigen/antibody in each well is independent. The independence of the reaction is supported by the result that the above four proteins produced dose-response curves simultaneously. Unlike a conventional protein array, our plate does not need the drying process for antibody adhesion to the plate, preventing inactivation of the antibody. And one can detect the antigen/antibody reaction using the enzymatic amplification reaction (for example utilizing the biotin-streptavidine interaction) like a conventional plate. In addition to these features, our microtiter plate also has the merit of eliminating the so-called "edge effect".

Hydrogels are considered an optimum material for protein chip surfaces, since they provide a quasi-liquid environment which allows protein activity to be maintained and shows good spot morphology as well as excellent immobilization capacity. In the following, we present a polyurethane (PU) chip that electrostatically binds IgG. The PU surface is optimized with regard to layer thickness (approximately 200 nm), hydrogel (2%) and immobilized antibody concentration (0.5 mg mL(-1); 0.3 ng spot(-1)), pH and ionic strength of the print buffer as well as to blocking solution. Evaluation is done in a direct IgG immunoassay using the Nexterion slide H as a reference. It is shown that higher IgG loading is achieved on the PU chip than on slide H, no matter whether 1x PBS (pH 7.2), Sörensen (pH 5.8) or Nexterion buffer was used as a spotting solution. Moreover, the crossreactivity with goat IgG, human IgG and monoclonal anti-CRP spotted in Nexterion buffer was as low as < or = 0.74% (slide H: < or = 3.34%).

Biomimetics--the concept of taking ideas from nature and implementing them in technology--has found particular use for the development of nanoscale materials. One such approach employs protein-mediated biotemplating for the nanostructuring of inorganic material. Recently, two key advances have been witnessed in this field. Firstly, the number of successfully employed biotemplates, including feasibility demonstrations of using three-dimensional crystalline structures, has been expanded. Secondly, the introduction of site-directed mutations on the protein template, or the display of peptides that exhibit effective biorecognition sequences for inorganic structures, has led to substantial improvements in our ability to control protein-mediated biotemplating. Taken together, these achievements will pave the way for the successful application of protein-mediated biotemplating in the future.