Search

Concrete-filled steel tubular (CFST) columns are widely utilized in structures owing to their cost-effectiveness, high strength, ductility, and proven fire resistance. Despite these advantages, concerns persist regarding the performance of CFST columns with locally corroded steel tubes, impeding their widespread adoption in offshore structures. This research employs three-dimensional finite element (FE) simulations for circular CFST stub columns subjected to axial compression, validated against experimental data. Verification includes full load-displacement histories, ultimate axial strengths, and failure modes. The validated FE models are then employed to assess and compare the structural behavior of CFST columns with various shapes of localized corrosion, analyzing overall load-deformation curves, interaction stress-deformation responses, and composite actions. To acquire critical data for understanding stub column behavior, 81 specimens underwent non-linear finite element analysis, with local corrosion represented by artificial notches in steel tubes. Test parameters, such as notch orientations, lengths, depths, widths, and concrete compressive strength, are varied. Results elucidate the impacts of these parameters on different aspects of stub column responses with corroded steel tubes. Furthermore, the accuracy of existing design models in predicting the ultimate axial strengths of CFST columns with corroded steel tubes is assessed. Finally, through parametric analysis of test results, a practical model is proposed and verified for computing the peak resistance of a CFST stub column with a locally corroded steel tube. • Finite-element simulation model for circular CFST stub columns with locally corroded steel tubes is developed. • The influence of different shapes of localized corrosion on the performance of circular CFST stub columns is investigated. • The behavior of circular CFST stub columns with locally corroded steel tubes is parametrically studied. • The proposed finite-element simulation and design models provide accurate predictions. [ABSTRACT FROM AUTHOR]

Concrete-filled double skin steel tubular columns with large hollow ratios (LHR-CFDST), as quintessential elements within offshore wind turbine structures, have received significant attention in contemporary times. As the scale of this type of structure continues to expand, an effective strategy to reduce steel consumption involves elevating the diameter-to-thickness (D/t) ratios of the steel tubes. Presently, there is a dearth of studies that explore the performance of LHR-CFDST columns in the case of thin-walled inner steel tubes. Four LHR-CFDST columns with varying D/t ratios of the inner tubes and one double-skin hollow steel tubular column were produced and tested under axial compression. The study encompassed an investigation into failure modes, local buckling behaviors, and ductility characteristics. The local buckling performance index of specimens with varying D/t ratios differed by up to 16.9%. Furthermore, the verified finite element model was subsequently employed for mechanistic analyses pertaining to the sandwiched concrete's stress distributions, and so on. When the peak loads were attained, the maximum variation in the stress values of the concrete of the specimens with different D/t ratios reached 50.4%. Subsequently, a multi-parameter impact analysis was applied to give a reasonable limit on the D/t ratio (225) of the inner steel tube for engineering design. Finally, the prevailing ultimate strength formulas outlined in established specifications were adapted by integrating the characteristics uncovered through this investigation. • Thin-walled inner tubes have a significant effect on CFDST with large hollow ratios • Inner tube's D/t ratio is positively correlated with the local buckling • Stress distribution and contact stresses in concrete are inextricably linked to the inner tube's D/t ratio • Multi-parameter impact analysis gives a reasonable limit of the D/t ratio for design • The equation considering the effect of buckling predict the CFDST columns with thin-walled inner tubes more accurately [ABSTRACT FROM AUTHOR]

Concrete-filled double skin steel tubular columns with large hollow ratio (LHR-CFDST) have been commonly used in recent years. With the increasing size of the engineering structures, one efficient way to decrease the consumption of steel is to increase the diameter-to-thickness ratio. Few studies have been conducted to report on thin-walled LHR-CFDST columns. At the same time, local buckling may occur in these structures in the absence of stiffening measures. Based on this, an experimental and numerical analysis was carried out for the stiffened thin-walled LHR-CFDST columns under axial compression in this paper. Five thin-walled LHR-CFDST columns with different stiffening measures (ribs, studs) were tested. The failure modes, load versus shortening curves, local buckling behaviours and ductility were investigated. The test results indicates that the stiffened measures effectively delayed the appearance of local buckling and increased the peak load. Besides, the finite element models validated by the test results were applied to the subsequent mechanical mechanism analysis of the stiffened thin-walled LHR-CFDST. It can be seen that the stiffened measures enhance the confinement of the inner and outer steel tubes on the concrete and greatly improve the ultimate strength of the concrete. Finally, the predicted peak load formulae in the existing design specifications were modified by combining the characteristics of the specimens in this paper. The peak load values obtained by the improved formulae agreed well with the test results. • Five thin-walled CFDST columns with different stiffening forms (ribs, studs) were tested under axial compression. • The effects of stiffeners on the local buckling and peak load of specimens were revealed. • The validated finite element model was developed to further analyze the structural mechanisms. • The interaction between steel tubes and concrete were investigated. • The predicted peak load formulae in the existing design specifications were modified. [ABSTRACT FROM AUTHOR]

Steel tubes with large diameter-thickness ratios are widely used in tubular steel towers of wind turbines. These steel tubes are susceptible to local buckling under compression-bending load, thus leading to a failure of the overall structures. In this paper, a new structural form of steel tubes with longitudinal stiffeners was proposed. Six specimens were tested to study the effects of stiffeners forms and diameter-thickness ratios of steel tubes. Finite element models were compared and validated by test results and used to further study the structural mechanisms. Lastly, the ultimate strength of specimens was evaluated by existing design guidelines preliminarily. According to the results, by setting stiffeners, especially the T-type stiffeners under the same consumption of the steel, the local buckling was prevented and the plastic deformability of the steel tubes was increased, resulting in the great enhancement of ultimate strength and ductility. The limits of quantity and width-thickness ratio of stiffeners to obtain a more stable and significant improvement effect were suggested through parametric analysis. The current methods agree well with the test results of unstiffened steel tubes but might be inaccurate for stiffened steel tubes. • Six specimens with different stiffener types and diameter-thickness ratios were tested under compression-bending load. • The finite element models were compared and validated by test results and used to further study the structural mechanisms. • The effects of stiffeners on the compression-bending behavior of steel tubes were revealed. • The limits of quantity and width-thickness ratio of stiffeners to obtain a significant effect were suggested. • The applicability and accuracy of the calculating methods in existing design guidelines were preliminarily evaluated. [ABSTRACT FROM AUTHOR]

Tapered Concrete-Filled Double Skin Steel Tubular (CFDST) columns have been commonly used in structures. To report further information, it is necessary to perform more studies on the structural behaviour of tapered CFDST columns, especially for those with high hollow ratios. This paper thus conducted an investigation on the tapered CFDST stub columns under axial compression. Specimens with varied tapered angle, hollow ratio and tubes' thickness were tested, and then typical failure modes, load versus displacement relations as well as strain development were revealed. Validated finite element models were given to further analyse the columns' structural mechanisms including the stress distributions, the interaction between the steel tubes and the sandwiched concrete, and the influence of main parameters. The ultimate strength of specimens was calculated tentatively using the methods in the existing design guidelines, and their accuracy and applicability for the tapered CFDST stub columns with high hollow ratios were preliminarily evaluated. A simplified method was suggested to predict the ultimate strength based on one of the guidelines, and the predictions show reasonable agreement with the test results. [Display omitted] • Tests on tapered CFDST stub columns under axial compression are reported. • Experimental performance of tapered CFDST stub columns is revealed. • Mechanism analysis is conducted through verified finite element models. • Methods for predicting the ultimate strength of tapered CFDST columns are checked. [ABSTRACT FROM AUTHOR]