Search

Concrete-filled double skin steel tubular columns with large hollow ratios (LHR-CFDST), as quintessential elements within offshore wind turbine structures, have received significant attention in contemporary times. As the scale of this type of structure continues to expand, an effective strategy to reduce steel consumption involves elevating the diameter-to-thickness (D/t) ratios of the steel tubes. Presently, there is a dearth of studies that explore the performance of LHR-CFDST columns in the case of thin-walled inner steel tubes. Four LHR-CFDST columns with varying D/t ratios of the inner tubes and one double-skin hollow steel tubular column were produced and tested under axial compression. The study encompassed an investigation into failure modes, local buckling behaviors, and ductility characteristics. The local buckling performance index of specimens with varying D/t ratios differed by up to 16.9%. Furthermore, the verified finite element model was subsequently employed for mechanistic analyses pertaining to the sandwiched concrete's stress distributions, and so on. When the peak loads were attained, the maximum variation in the stress values of the concrete of the specimens with different D/t ratios reached 50.4%. Subsequently, a multi-parameter impact analysis was applied to give a reasonable limit on the D/t ratio (225) of the inner steel tube for engineering design. Finally, the prevailing ultimate strength formulas outlined in established specifications were adapted by integrating the characteristics uncovered through this investigation. • Thin-walled inner tubes have a significant effect on CFDST with large hollow ratios • Inner tube's D/t ratio is positively correlated with the local buckling • Stress distribution and contact stresses in concrete are inextricably linked to the inner tube's D/t ratio • Multi-parameter impact analysis gives a reasonable limit of the D/t ratio for design • The equation considering the effect of buckling predict the CFDST columns with thin-walled inner tubes more accurately [ABSTRACT FROM AUTHOR]

Concrete-filled double skin steel tubular columns with large hollow ratio (LHR-CFDST) have been commonly used in recent years. With the increasing size of the engineering structures, one efficient way to decrease the consumption of steel is to increase the diameter-to-thickness ratio. Few studies have been conducted to report on thin-walled LHR-CFDST columns. At the same time, local buckling may occur in these structures in the absence of stiffening measures. Based on this, an experimental and numerical analysis was carried out for the stiffened thin-walled LHR-CFDST columns under axial compression in this paper. Five thin-walled LHR-CFDST columns with different stiffening measures (ribs, studs) were tested. The failure modes, load versus shortening curves, local buckling behaviours and ductility were investigated. The test results indicates that the stiffened measures effectively delayed the appearance of local buckling and increased the peak load. Besides, the finite element models validated by the test results were applied to the subsequent mechanical mechanism analysis of the stiffened thin-walled LHR-CFDST. It can be seen that the stiffened measures enhance the confinement of the inner and outer steel tubes on the concrete and greatly improve the ultimate strength of the concrete. Finally, the predicted peak load formulae in the existing design specifications were modified by combining the characteristics of the specimens in this paper. The peak load values obtained by the improved formulae agreed well with the test results. • Five thin-walled CFDST columns with different stiffening forms (ribs, studs) were tested under axial compression. • The effects of stiffeners on the local buckling and peak load of specimens were revealed. • The validated finite element model was developed to further analyze the structural mechanisms. • The interaction between steel tubes and concrete were investigated. • The predicted peak load formulae in the existing design specifications were modified. [ABSTRACT FROM AUTHOR]