Search

In this study an open-source tool GCD Analyzer, based on Microsoft® Excel, for Computerized Glow Curve Deconvolution analysis (CGCD) of thermoluminescence (TL) glow peak has been developed using a more accurate rational approximation. It is capable of deconvolution of glow curves having discrete or continuous trap distribution and can be used for routine as well as emergency radiation dosimetric analysis. This tool has a unique feature of TL glow curve analysis by combining discrete and continuous energy distributions for crystalline, amorphous, and mixed materials. To obtain best values of trap parameters like activation energy (E), frequency factor (s), order of kinetics (b), GCD Analyzer has the capability of analyzing glow curve using selectable individual peak of various physical kinetic models i.e. FOK, SOK, GOK, MOK, and Continuous Traps Distribution (CTD) with subtraction of optional background signal. The residual graph gives a clear visual understanding of the Figure of Merit (F.O.M). A comparison of asymptotic and rational approximation to the built-in second order exponential integral function E 2 (E/KT) for E/KT < 600 is also presented. The results are verified by deconvolution of test synthetic glow curves with F.O.M up to 0.0005%, experimental glow curve for CTD with F.O.M of 0.9781%, and in the case of GLOWCANIN project glow curves, the F.O.M is comparable to the least values achieved by inter-comparison participants. • Development of easy to use CGCD tool based on Microsoft Excel®. • Deconvolution of TL glow curves using individual or combination of various models. • An inter-comparison of asymptotic and rational approximations in TL expressions. • Accuracy of fitted results depends upon the selection of approximation. • Use of GLOWCANIN project and synthetic glow curves for validation and analysis. [ABSTRACT FROM AUTHOR]

Thermoluminescence (TL), kinetic parameters and dosimetric features of Pakistani limestone (CaCO 3) is reported in this study. Both compositional and structural analyses reveal that the material has a crystalline nature with rhombohedral structure and non-uniform crystallite size having major content of CaCO 3. A powdered limestone sample of 30 mg is found to be the optimized weight for TL and other dosimetric studies. After irradiating the samples with a test dose of 100 Gy using a β source three composite glow peaks termed as P1, P2 and P3 are visible at 100, 230 and 330 °C respectively using a linear heating rate of 1 °C/s during the TL readout. The Coefficient of Variation (COV) is found to be about 4%. Kinetic parameters (i.e., frequency factor (f), activation energy (E), and the kinetic order (b)) are estimated using both first and second Order of kinetics using an in-house Computerized Glow Curve Deconvolution (GCD) software. The figure-of-merit (FOM) is found to be 2.12%. The distribution of continuum traps with activation energy in the range of 0.77–2.59 eV is observed in the kinetic parameter analysis of the glow peaks of the sample. The TL response in the dose range of 1–5 Gy (not reported previously) and linearity in the dose response in the dose range of 1–10 Gy is observed in samples of Pakistani limestone. The Minimum Detectable Dose (MDD) is 1.01 Gy clearly resembling the experimentally linear fitted results. After a fading study for a period of thirty days, only the first peak i.e., P1 majorly fades while no major change is observed in the amplitude of peaks P2 and P3. In addition, P1 is the main contributor fading by 92% within the first 24 h of irradiation while P2 fades by 30 %. However, P3 shows stability with a very minor fading of 0.05% within 24 h of irradiation. This study concludes that Pakistani limestone can be further assessed as a potential radiation dosimeter for various applications. • Material characterization, TL, kinetic parametric analysis and other dosimetric features of Pakistani limestone were investigated. • Sample weight optimization study was performed for powdered Pakistani limestone. • Three glow peaks P1, P2 and P3 were observed with a test dose of 100 Gy with beta source while fourth peaks was identified using deconvolution by CGCD method. • TL response observed between 1–5 Gy with Minimum Detectable Dose (MDD) of 1 Gy and 3.4 % Coefficient of Variation (COV). [ABSTRACT FROM AUTHOR]