Search

BackgroundCoronary artery calcification (CAC) is associated with high rates of restenosis and adverse clinical events after percutaneous coronary intervention (PCI) with drug-eluting stents (DES).ObjectivesThe aim of this study was to evaluate the long-term clinical outcomes of drug-coated balloon (DCB)-only treatment for de novo lesions with and without CAC.MethodsPatients with de novo coronary disease treated with the DCB-only strategy were retrospectively enrolled from three centers and categorized into a CAC group and a non-CAC group. The primary endpoint was the target lesion failure (TLF) rate during the 3-year follow-up. Secondary endpoints included the occurrence of major adverse cardiac events (MACEs), target lesion revascularization (TLR), cardiac death, myocardial infarction (MI) and any revascularization. Propensity score matching (PSM) was conducted to assemble a cohort of patients with similar baseline characteristics.ResultsA total of 1,263 patients with 1,392 lesions were included, and 243 patients were included in each group after PSM. Compared with the non-CAC group, the incidence rates of TLF (9.52% vs. 4.94%, odds ratio [OR]: 2.080; 95% confidence interval [CI]: 1.083–3.998, P = 0.034) and TLR (7.41% vs. 2.88%, OR: 2.642; 95% CI: 1.206–5.787, P = 0.020) in the CAC group were higher. The incidence rates of MACE (12.35% vs. 7.82%, OR: 1.665; 95% CI: 0.951–2.916, P = 0.079), cardiac death (2.06% vs. 2.06%, OR: 0.995; 95% CI: 0.288–3.436, P = 0.993), MI (1.23% vs. 0.82%, OR: 2.505; 95% CI: 0.261–8.689, P = 0.652) and any revascularization (12.76% vs. 9.67%, OR: 1.256; 95% CI: 0.747–2.111, P = 0.738) were similar between groups.ConclusionsCAC increased the incidence of TLF and TLR without a substantial increase in the risk of MACE, cardiac death, MI, or any revascularization in patients treated with DCB-only angioplasty during the 3-year follow-up.

BackgroundData on drug-coated balloons (DCB) for de novo coronary chronic total occlusion (CTO) are limited. We aimed to investigate the long-term outcomes of substitution of drug-eluting stents (DES) by DCB.MethodsWe compared the outcomes of less DES strategy (DCB alone or combined with DES) and DES-only strategy in treating de novo coronary CTO in this prospective, observational, multicenter study. The primary endpoints were major adverse cardiovascular events (MACE), target vessel revascularization, myocardial infarction, and death during 3-year follow-up. The secondary endpoints were late lumen loss (LLL) and restenosis until 1-year after operation.ResultsOf the 591 eligible patients consecutively enrolled between January 2015 and December 2019, 281 (290 lesions) were treated with DCB (DCB-only or combined with DES) and 310 (319 lesions) with DES only. In the DCB group, 147 (50.7%) lesions were treated using DCB-only, and the bailout stenting rate was relatively low (3.1%). The average stent length per lesion in the DCB group was significantly shorter compared with the DES-only group (21.5 ± 25.5 mm vs. 54.5 ± 26.0 mm, p 0.999). The Kaplan–Meier estimates of MACE at 3-year (11.8% vs. 12.0%, log-rank p = 0.688) was similar between the groups.ConclusionPercutaneous coronary intervention with DCB is a potential “stent-less” therapy for de novo CTO lesions with satisfactory long-term clinical results compared to the DES-only approach.

Shape memory polymers (SMP) are the smart materials that have received the most attention and are the most commonly employed. SMP can be 4D printed to create prefabricated components with transform shapes, properties, or functions under different external excitations. Although smart equipment assembled from these prefabricated components is extensively used in various fields, a systematic overview summary of their design ideas still needs to be provided. This paper briefly analyzes current trends in the design ideas and application of SMP-based prefabricated components. By summarizing two different design ideas: structural combination and material modification, it demonstrates the application of smart equipment assembled from SMP-based prefabricated components in medical, industrial, and aerospace fields. Furthermore, current challenges with both design ideas are discussed.

Osteoporotic fractures, also known as fragility fractures, are prevalent in the elderly and bring tremendous social burdens. Poor bone quality, weak repair capacity, instability, and high failure rate of internal fixation are main characteristics of osteoporotic fractures. Osteoporotic bone defects are common and need to be repaired by appropriate materials. Proximal humerus, distal radius, tibia plateau, calcaneus, and spine are common osteoporotic fractures with bone defect. Here, the consensus from the Osteoporosis Group of Chinese Orthopaedic Association concentrates on the epidemiology, characters, and management strategies of common osteoporotic fractures with bone defect to standardize clinical practice in bone repair of osteoporotic fractures.

In this study, a ternary blend modifier (TBM) was prepared with RPE, RPP, and various dosages of PP-g-MAH (i.e., 0%, 1%, 3%, 5%, 7%, and 9% by weight of RPE and RPP) by a twin-screw extruder. The performance of TBM (4% by weight of asphalt) modified asphalt was studied, with the increase of PP-g-MAH content, the penetration decreases gradually, but softening point and viscosity increases and ductility exists minimum value at 7% content, with the increasing of PP-g-MAH percentage, the dynamic rheological properties show that |G*| increases, while the δ and |G*|cosδ decrease, and the fatigue performance (|G*|sinδ) of TBM modified asphalt is worse than virgin asphalt. Dynamic stability test shows that TBM shows the prominent high-temperature properties of a modified (asphalt mixture. BBR test indicates that the m-value of asphalt modified with TBM does not fulfill the requirements (m-value>0.3) except at 5% and 7%, but the S meets the standard requirements (S < 300 MPa), and increases from 0% to 7%, then decreases slightly. In order to illuminate possible reasons, a chemical reaction (ester compounds generated) and physical twines of concerned polymer molecules were put forward, and the results were confirmed by infrared analysis.

Gamma-delta (γδ) T cells are a subset of T cells that promote the inflammatory responses of lymphoid and myeloid lineages, and are especially vital to the initial inflammatory and immune responses. Given the capability to connect crux inflammations of adaptive and innate immunity, γδ T cells are responsive to multiple molecular cues and can acquire the capacity to induce various cytokines, such as GM-CSF, IL-4, IL-17, IL-21, IL-22, and IFN-γ. Nevertheless, the exact mechanisms responsible for γδ T cell proinflammatory functions remain poorly understood, particularly in the context of the central nervous system (CNS) diseases. CNS disease, usually leading to irreversible cognitive and physical disability, is becoming a worldwide public health problem. Here, we offer a review of the neuro-inflammatory and immune functions of γδ T cells, intending to understand their roles in CNS diseases, which may be crucial for the development of novel clinical applications.

In this paper, the effect of sodium alginate (SA) on the flotation separation of molybdenite (MoS2) from chalcopyrite using kerosene as collector was systematically investigated. The results of single-mineral micro-flotation tests indicated that SA exhibited strong depression on chalcopyrite flotation while it imposed no impact on the floatability of molybdenite. However, in the chalcopyrite–molybdenite mixed-mineral flotation system, the presence of chalcopyrite significantly increased the depressing effect of SA on molybdenite flotation, leading to a considerable reduction in the flotation selectivity. The negative impact of chalcopyrite on the performance of SA in molybdenite flotation was eliminated by adding a certain dosage of kerosene prior to SA. A concentrate containing 53.43% of molybdenum (Mo) was obtained at 76.90% of recovery using 19 mg/L kerosene and 40 mg/L SA at pH 5.4. Zeta potential measurements indicated that the adsorption of SA on chalcopyrite surfaces was stronger than that on molybdenite surfaces, which agreed with the single-mineral flotation test results. The adsorption of SA on chalcopyrite was further confirmed to be chemisorption by Fourier-transform infrared spectroscopy (FTIR) spectra analyses. When Cu2+ appeared in solution, the flotation of molybdenite was strongly depressed by SA. Mechanism analyses indicated that more active sites were generated on molybdenite surfaces after the addition of Cu2+, thus promoting the adsorption of SA.

Little evidence exists to confirm whether the sensory-related neural activity that occurs when observing others in pain is highly responsive to empathy for pain. From a perspective of intervention, the present study employed placebo manipulation with a transferable paradigm to explore whether the sensory regional activation that occurs when viewing pictures of others in pain could be modulated by the placebo effect. We first performed a screening behavioral experiment for selecting placebo responders and then entered them into a functional magnetic resonance (fMRI) experiment in which they were exposed to the same conditions as before. Participants were informed that it was equally possible to be assigned to the treatment group (placebo manipulation) or the no-treatment group (control); they all, in fact, received treatment and placebo effect would be detected by comparing placebo conditions and no-placebo control condition. Each participant experienced a phase of reinforcing placebo belief with pain in self and a phase of testing transferable placebo effect on empathy for pain. As a result, we found significant activation in sensory areas, including the posterior insula (PI) and the postcentral gyrus, and in the middle cingulate cortex while participants observed pictures of others in pain. More importantly, for the first time, we observed relieved activation in the PI modulated by the placebo effect only associated with pain pictures but not with no-pain pictures. This suggests that sensory activity in the PI might be involved in the processing for empathic pain. This new approach sheds light on research and applications in clinical settings.

Objective: To detect the changes of gray matter volume (GMV) and their correlation with severity of symptom in patients with post-traumatic stress disorder (PTSD) who were defined with updated DSM-5 diagnostic criteria.Method: 71 participants were assigned into PTSD group (n = 35) or trauma-exposed control (TEC) group (n = 36) with the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition. Voxel-based morphometry analysis was used to detect alterations in GMV in the PTSD group.Results: We found that the PTSD group had larger GMV in the left middle temporal gyrus (MTG) and in the right dorsal medial prefrontal cortex (dmPFC), and smaller GMV in the region of the right temporal pole (TP) than the TEC group. We also found that PTSD Checklist for DSM-5 (PCL-5) scores correlated positively with the left MTG and right dmPFC GMV, and negatively with left TP GMV. These correlations were consistent with the findings of the between-group comparisons.Conclusions: GMV alterations in the MTG, dmPFC, and TP are detected in the group comparisons and correlated with symptom severity when classifying PTSD individuals according to DSM-5 diagnostic criteria within an earthquake-exposed population.