Search

Fiber-reinforced polymer (FRP) is a composite material made of a polymer matrix reinforced with fibers. Hybrid composites are referred to as high-performance FRP materials used in safety-critical structural applications. Generally, FRP composite laminates are very weak in their out-of-plane properties, to address this issue unidirectional (UD) Glass laminates are prepared by modifying the matrix using plasma-treated multi-walled carbon nanotubes (MWCNTs) in epoxy matrix and compared fracture toughness characteristics with low-cost micro fillers like Aluminum oxide (Al2O3) and Sodium Carbonate (Na2CO3). These Nano and Micro fillers are loaded with 0.5wt%, 1wt% and 2wt% in the epoxy matrix while making FRP laminates. Adding these fillers into the epoxy matrix was caused a significant increase in the out-of-plane load-bearing capacity of the composites as compared to plain Glass epoxy laminates. Thus, the fracture toughness was enhanced by 20-26% and 14-17% under mode I and mode II loading respectively. Further, a Scanning electron microscopic analysis was also done on delaminated glass laminates to understand the failure mechanisms. [ABSTRACT FROM AUTHOR]

In this study, a multi-parameter analysis, using Taguchi method for design of experiments, has been conducted to investigate the optimum curing conditions for GNPs/E-glass fabric/epoxy laminated nanocomposites. The independent variables in the L25 Taguchi orthogonal array were heating rate, curing temperature and curing time, addressing five levels each. Tensile and 3-point bending tests were performed for each experiment number (run number) of the Taguchi L25. The analysis shown that the most significant parameter for tensile strength is the time and for flexural strength is the temperature. Also, it shown that the optimum performance was obtained for temperature values greater than the glass transition temperature Tg. [ABSTRACT FROM AUTHOR]