Search

Multilevel inverters (MLIs) are being used in wide range of power electronic applications. These converters have attracted a lot of attention during recent years and exist in different topologies with similar basic concepts. This paper presents five main submodules (SMs) to be used as the basic structures of MLIs. The paper reviews the common MLI topologies from the structural point of view. The topologies are divided into the different SMs to show conventional MLI configurations and future topologies that can be created from the main SMs. A comparative study between different topologies is performed in detail. The MLIs are categorized and investigated with from different perspectives such as the number of components, the ability to create inherent negative voltage, working in regeneration mode and using single dc source. [ABSTRACT FROM AUTHOR]

At 13.56 MHz, the circuit parasitic elements strongly affect the stability, performance, and efficiency of the inverter. In this paper, the effect of parasitic elements in the 13.56-MHz half-bridge inverter is analyzed in detail based on the point of view of the high-frequency ringing in the circuit. A proposed inverter design that aims to attenuate the influence of the parasitic elements is presented, including optimized printed circuit board (PCB) design and ringing damping design. The simulation and experiment results show that the proposed PCB design not only reduces the parasitic inductance in the ringing loop but also improves the stability of the inverter by avoiding the subresonant at low frequency and reducing the radiation electromagnetic interference noise. This paper also points out that the ringing current exists in the circuit even with the proposed optimized PCB design lead to the instability of the inverter at high voltage operating condition. The proposed damping circuit significantly suppresses the ringing in the circuit and improves the stability as well as the efficiency of the inverter. The experiment results confirm that by using the proposed design, the half-bridge inverter module using Silicon mosfet is stable at 13.56-MHz switching frequency and its efficiency obtains \text93.1\% at 1.2-kW output power. [ABSTRACT FROM PUBLISHER]

The high-frequency magnetic linked solid-state transformer (SST) has the tremendous potential to solve the issues related to interfacing the grid with renewable energy sources and the non-linear loads as well as to provide the additional control functionalities. Several H-bridges are usually connected in series for the medium voltage grid integration of the SST. The number of the dual active bridge modules and the number of high-frequency magnetic links (HFMLs) usually increase with the increase of the number of series connected H-bridges. This increases the possibility of parameter mismatches and system instability. Therefore, the multiple-active bridge (MAB) dc-dc converter concept has been proposed for next generation SST, where multiple H-bridges share the same HFML. This configuration reduces the number of HFML and increases the cross-coupling power transfer capability. However, the design process of the MAB converter involves a multi-physics research in the field of power electronics, magnetics, switching, control, and energy management. In this paper, the detailed analytical modelling and the control technique of the silicon carbide (SiC)-based MAB converter are investigated. The small and large signal average models of the converter are developed and a voltage balance controller is designed for the better understanding of the controller characteristics. The effect of connecting several H-bridges to a single HFML is investigated in detail. Moreover, to reduce the switching loss, the converter topology adopts the SiC-based switching devices instead of the traditional silicon (Si)-based devices and the nanocrystalline magnetic material is used for the HFML design due to its low specific core loss. A scaled down laboratory prototype of the MAB converter is implemented in the laboratory and can be utilized as a basic building block for the next generation SST. [ABSTRACT FROM AUTHOR]

Pulsed power loads (PPLs) are becoming prevalent in medium-voltage naval dc micro-grids. To alleviate their effects on the system, energy storages are commonly installed. For optimal performance, their interface converters need to have fast dynamics and excellent disturbance rejection capability. Moreover, these converters often need to have voltage transformation and galvanic isolation capability since common energy storage technologies such as batteries and supercaps are typically assembled with low-voltage strings. In order to address these issues, a moving discretized control set model predictive control (MDCS-MPC) is proposed in this paper and applied on a dual-active-bridge converter. Fixed switching frequency is maintained, enabling easy passive components design. The proposed MDCS-MPC has a reduced prediction horizon, which allows low computational burden. The operating principle of the MDCS-MPC is introduced in the development of a cost function, which provides stiff voltage regulation. Resonance damping and sampling noise resistance can also be achieved with the proposed cost function. An adaptive step is introduced to enable a fast transition. Assessments on the performance of the proposed MDCS-MPC are conducted. Comparisons with other control methods are also provided. Experimental validations on a 300 V/300 V 20-kHz 1-kW dual-active-bridge converter are carried out to verify the theoretical claims. [ABSTRACT FROM AUTHOR]

Recently multilevel inverters (MLIs) have received wide attention from industry and academia, as they are changing into a viable technology for diverse applications. To produce high-quality output using less switch count, development of novel reduced switch MLI (RS MLI) topologies has been a focus of current research theme. This paper presents design and control of a switched-diode dual source single switch MLI (SDDS MLI). The generalized SDDS MLI is first designed using an asymmetric basic unit. Proposed SDDS MLI requires less switch count and driver circuit count compared with the few recently developed RS MLI topologies. To improve the voltage quality by eliminating targeted low-order harmonics, a modified version of fish swarm optimization algorithm is examined for computing optimum switching angles required to control the SDDS MLI. Moreover, suitability and superiority of the derived algorithm are established by comparing with traditional selective harmonic elimination techniques. The developed topology is investigated through several MATLAB simulations as well as experimental tests in the laboratory applying the modified control approach. [ABSTRACT FROM AUTHOR]

A gate driving for power devices is a key technology to further improve switching characteristics. With the help of digital gate driver IC, the switching behavior of power devices can be enhanced even under high-speed switching. In this paper, an evaluation platform for determining the optimal switching pattern of an active gate drive control is proposed for an inverter circuit. A high speed optimization system is built up to search for an advantageous switching pattern that reduces total switching loss of two power devices in an inverter circuit and constrains surge voltage simultaneously. The proposed online optimization demonstrates its feasibility for the full-bridge inverter circuit, which is rated at 500 V with digital active gate drive control. Experimental results show that the proposed optimization system is able to obtain optimal switching pattern from $64^{60}$ possible combinations of switching patterns within 15 min, which is 6 times faster than the previous study. Optimizations can also conducted under different load current conditions. Eventually, the obtained optimal pattern yields up to 42% reduction in the total switching loss when it constrains surge voltage to minimum compared with the conventional driving pattern. [ABSTRACT FROM AUTHOR]

The ever-increasing utilization of sensitive loads in the industrial, commercial, and residential areas in distribution networks requires enhanced reliability and quality of supply. This can be achieved, thanks to self-healing features of smart grids that already include the control technologies necessary for the restoration strategy in case of a fault. In this paper, an analytical and global optimization model is proposed for the restoration problem. A novel mathematical formulation is presented for the reconfiguration problem reducing the number of required binary variables while covering more practical scenarios compared to the existing models. The considered self-healing actions besides the network reconfiguration are the nodal load-rejection, the tap setting modification of voltage regulation devices (incl. OLTCs, SVR, and CBs), and the active/reactive power dispatch of DGs. The voltage dependency of loads is also considered. Thus, the proposed optimization problem determines the most efficient restoration plan minimizing the number of de-energized nodes with the minimum number of self-healing actions. The problem is formulated as a Mixed-Integer Second Order Cone Programming (MISOCP) and solved using the Gurobi solver via the MATLAB interface YALMIP. A real 83–node distribution network is used to test and verify the presented methodology. [ABSTRACT FROM AUTHOR]

In this paper, a practical online open-switch fault detection method is presented. The proposed open-switch fault detection method is used to detect the open-circuited fault switch in the parallel inverters system. This method can relieve the severe effects of the over-current stress, to avoid the secondary fault to the electrical components in the parallel inverters system. This method is based on the detection of the resulting zero-sequence current, under the fault conditions. The proposed algorithm is activated by detecting the zero-sequence current between the parallel units, under the open-switch fault conditions. The sign of the resulting zero-sequence current is related to the upper or the lower open-switch fault case. The faulty phase identification relies on the analysis and the investigation of only the current measurements information of the faulty inverter. This method can get rid of the effects of the load, to obtain a reliable identification. The effectiveness of the proposed open-switch fault detection algorithm is theoretically analyzed and validated by the simulations and the experiments. [ABSTRACT FROM AUTHOR]

Single-phase universal-input ac–dc converters are needed in a wide range of applications. This paper presents a novel power factor correction (PFC) architecture that can achieve high-power density and high efficiency for grid-interface power electronics. The multitrack PFC architecture reduces the internal device voltage stress of the power converter subsystems, allowing PFC circuits to maintain zero-voltage-switching at high frequency (1 MHz–4 MHz) across universal input voltage range (85  $\rm V_{\text{ac}}$ –265  $\rm V_{\text{ac}}$). The high performance of the power converter is enabled by delivering power in multiple stacked voltage domains and reconfiguring the power processing paths depending on the input voltage. This multitrack concept can be used together with many other design techniques for PFC systems to create mutual advantages in many function blocks. A prototype 150 W, universal ac input, 12  $\rm V_{\text{dc}}$ output, isolated multitrack PFC system with a power density of 50 W/in $^3$ , and a peak end-to-end efficiency of 92% has been built and tested to verify the effectiveness of the multitrack PFC architecture. [ABSTRACT FROM AUTHOR]

A 1-φ hybrid nine-level inverter (H9LI) topology has been proposed in this paper. The proposed H9LI topology uses a simple phase disposition pulsewidth modulation strategy to generate nine-voltage levels in the output. The main advantage of this topology is that it has a low switch count (ten switches) compared to the existing nine-level inverter topologies. To regulate the voltage across auxiliary capacitor, two innovative control techniques are proposed, which are integrated with the inverter modulation technique itself. Hence, it does not require any extra voltage balancing circuits to maintain the voltage across the auxiliary capacitor and input dc capacitors. A major advantage of these control techniques is that they eliminate the sensing of the coupled inductor current. Another significant advantage of H9LI is that loss distribution among all the power switches is more uniform compared to existing nine-level inverters. Due to low part count and absence of extra voltage balancing circuits, the H9LI achieves higher efficiency (η ≍ 94.5%) and lower cost. Furthermore, the requirement of filter size reduces due to the presence of coupled inductor in H9LI. The proposed 1-φ grid connected H9LI is verified through MATLAB/Simulink simulations and validated through experiments on a laboratory prototype of 400-VA rating. [ABSTRACT FROM AUTHOR]

This paper presents a model-based method to diagnose single- and multiple-transistor open-circuit (OC) faults in grid-tied three-phase voltage-source inverters (VSIs). The method is based on calculated average bridge arm pole-to-pole (PTP) voltages and error-adaptive thresholds. Only existing signals for closed-loop control are needed; thus, this method can be easily embedded in the system without extra sampling and circuits. Average PTP voltage deviations are chosen as diagnosis variables, which show considerable distinction quickly after fault. Consequently, fast fault diagnosis speed can be achieved. The fault diagnosis time for single fault can be as short as two switching periods. Besides, diagnosis variables show the same faulty characteristics in inverter mode and rectifier mode; thus, this method is effective in both modes. Moreover, for the first time, the variation of inductance caused by conducted current is considered to obtain a more accurate variable-inductance model, and the thresholds are updated according to mathematically estimated diagnosis variable calculation errors from sampling error, inductance error, dead time, and delay time, which maintains high robustness as well as fast speed. Finally, the effectiveness of the proposed method is validated with experiments. [ABSTRACT FROM AUTHOR]

A grid-tied cascaded H-bridge (CHB) converter with low frequency modulation techniques needs to meet power quality standards. At the same time, the effects of grid voltage harmonics on CHB converter's current harmonics must be considered in the modulation techniques. Furthermore, the dc link voltages of grid-tied converters need to be regulated. In this paper, an asymmetric selective harmonic current mitigation-pulse width modulation (PWM) (ASHCM-PWM) technique is used to meet the current harmonic limits of a power quality standard with the effects of grid voltage harmonics considered in the equation set of its optimization process. A voltage balancing technique based on the average power of each cell is derived to regulate the dc link voltages of the CHB converters without using dc voltage sensors. By using the proposed voltage balancing technique, the CHB converters do not need complicated dc link voltage controllers. As a result, the cost and complexity of the grid-tied converters can be significantly reduced. Simulations and experiments were conducted on a 7-level grid-tied CHB converter to validate the proposed voltage balancing technique with ASHCM-PWM modulation technique. [ABSTRACT FROM AUTHOR]

This paper presents the concept of three-phase module-integrated converters (MICs) incorporated in grid-tied large-scale photovoltaic (PV) systems. The current-source converter with dc voltage boost capability, namely the single-stage power conversion system, is proposed for the three-phase PV MIC system. A model predictive scheme with low switching frequency is designed to control the proposed topology in such a way that provides a certain amount of active and reactive power in steady-state operation and also provides a proper ratio of reactive power under transient conditions to meet the low-voltage ride through regulations. To predict the future behavior of current control values and switching states, a discrete-time model of the MIC is developed in the synchronous reference frame. It is demonstrated that the injected active and reactive power can be controlled by minimizing the cost function introduced in the predictive switching algorithm. The proposed structure is simulated in MATLAB/SIMULINK software. An experimental verification is provided to justify the performance of the proposed control method through a 300-VA laboratory prototype. The results verify the desired performance of the proposed control scheme for exchanging both active and reactive powers between the PV MIC and the grid within different operating conditions. [ABSTRACT FROM AUTHOR]

Grid-connected power conversion systems for renewable energy sources must fulfill several requirements, e.g., the high efficiency, the reduced cost and complexity, and, quite often, the boost capabilities that is usually achieved using a front-end dc–dc boost converter before the inversion stage, leading to a two-stage architecture. Meanwhile, single-stage power conversion systems, which perform the boosting operation within the inversion one, offer some potential advantages, in terms of reducing the complexity and the volume of the whole system. Among several proposed options, the split-source inverter (SSI) has been recently proposed by Abdelhakim et al. as an alternative option with some interesting features to the commonly used Z-source inverter. Taking into account that the SSI is controlled by a single parameter, i.e., its dc and ac sides are controlled by the modulation index, it is of paramount importance to investigate its control scheme in grid-connected mode, which has never been studied yet. Hence, this paper models the SSI dc side and proposes a modified modulation scheme combined with the commonly used synchronous reference frame control technique to achieve a decoupled control scheme of the SSI in grid-connected mode, i.e., the dc and the ac sides of the SSI can be controlled independently, which is convenient for many applications. The introduced control scheme is analyzed and simulated using a MATLAB/Simulink model, where a reduced scale 1-kVA grid-connected SSI is designed and simulated for the sake of experimental validation. Finally, the designed system is implemented experimentally to validate and verify the reported analysis and simulations. [ABSTRACT FROM PUBLISHER]

This paper proposes a new single-phase dc/ac converter topology with soft-switching operation. The proposed converter achieves soft-switching by using DCM (discontinuous current mode) operation and a common turn-off snubber capacitor connected to the dc terminals of a full-bridge configuration. One additional semiconductor switch is used to disconnect the snubber capacitor from the dc side, and allows the snubber capacitor to be discharged. The DCM operation realizes zero-current turn-on and the snubber capacitor achieves zero-voltage turn-off. The proposed converter can be applied to a grid-connected converter for domestic renewable energy and energy storage, including Photovoltaic and battery energy storage devices. This paper describes operation principles, control and modulation techniques as a grid-connecting converter. Experimental verification including loss analysis with a 1-kW pilot device is provided. [ABSTRACT FROM AUTHOR]

This paper investigates the suitability of selective harmonic elimination (SHE) for low-loss multimegawatt grid-connected photovoltaic (PV) inverters. The proposed system is able to meet utilities regulations, IEEE and IEC standards. In an attempt to substantiate the potential superiority of SHE over carrier-based or space-vector pulsewidth modulation (PWM), this paper demonstrates that SHE may allow grid-connected PV inverters to be controlled using a switching frequency of less than 1 kHz, while the inverter is still able to provide necessary operation features such as independent control of active and reactive powers and operation control simplicity. For system validation, experimental results with SHE are compared to the case when the inverter is controlled using third-harmonic injection PWM, with a 2-kHz switching frequency. Furthermore, the paper proposes a new implementation technique for SHE that utilizes the third harmonics to spread the switching angles over 90° instead of being located in a narrow range as generated when using conventional techniques, along with increases in modulation index. The advantages of the proposed technique include simplicity in implementation and flexibility in PWM waveforms. Simulation and experimentation demonstrate agreement, which validates the practicability of the proposed system. [ABSTRACT FROM AUTHOR]

Frequently considered one of the promising solutions for grid connection of the photovoltaic (PV) power generation system, module-integrated converters have been the focus of numerous papers. Most of the proposed approaches thus far have relied on the use of series string of the dc-dc converter to create a high-voltage string connected to the dc-ac inverter. The boost converter is better in this application. However, under inhomogeneous irradiation, the power generated by each PV module and the output dc voltage of each boost become unbalanced so that the output currents of each boost are balanced and equal to the string current. In this case, the boost converter cannot always deliver all the power from a mixture of shaded panels and those delivering full power. In this paper, a nondissipative string current diverter is proposed to overcome this problem. One important feature of the proposed circuit herein is the ability to effectively decouple each converter from the rest of the string, making it insensitive to change in the string current. Hence, it is possible to obtain the maximum power from the PV module with the maximum power point tracking algorithm implemented on each dc-dc converter and to do so at the optimum efficiency. The simulation and experimental results verify that the proposed topology exhibits notable performances despite inhomogeneous irradiation. On the other hand, the string current diverter circuit is very easy to control and does not operate without inhomogeneous irradiation, so the topology efficiency is improved for any type of irradiation. [ABSTRACT FROM AUTHOR]

In this paper, a single-phase grid-connected transformerless photovoltaic inverter for residential application is presented. The inverter is derived from a boost cascaded with a buck converter along with a line frequency unfolding circuit. Due to its novel operating modes, high efficiency can be achieved because there is only one switch operating at high frequency at a time, and the converter allows the use of power MOSFET and ultrafast reverse recovery diode. It also features a robust structure because the phase leg does not have a shoot-through issue. This paper begins with theoretical analysis and modeling of this boost-buck converter-based inverter. And the model indicates that small boost inductance will lead to an increase in the resonant pole frequency and a decrease in the peak of Q, which results in easier control and greater stability. Thus, interleaved multiple phases structure is proposed to have small equivalent inductance; meanwhile, the ripple can be decreased, and the inductor size can be reduced as well. A two-phase interleaved inverter is then designed accordingly. Finally, the simulation and experiment results are shown to verify the concept and the tested efficiency under 1-kW power condition is up to 98.5%. [ABSTRACT FROM AUTHOR]

A novel interleaved dual buck full-bridge three-level inverter (IDBFTI) is proposed for the grid-connected system in this paper. It retains the advantages of interleaved parallel technology for inverter as follows: reducing the output ripple current and the total harmonic distortion of the output current, increasing the power density of system, and reducing the current stress and thermal stress of power devices. Besides, it can solve the problem of zero sequence circulation current (ZSCC) in interleaved inverter system by the circuit structure, and it also has the advantages of no shoot-through problem, no reverse recovery of the body diode, and three-level output. The interleaved inverter circuits share two power-frequency switches, which are resized for each specific application, and it is easier to extend the system by improving current capability of the two switches. The working principle of this system is introduced in detail, and a 2-kW experimental prototype has been established and tested. Test results verify the principle and the excellent performance of IDBFTI. [ABSTRACT FROM PUBLISHER]

In this paper, the performance of the new three-dimensional space vector-based switching signal generation technique for a grid-connected four-leg voltage source inverter used as a shunt compensator is proposed. The shunt compensator can be used for reactive power compensation, harmonic elimination, load balancing, and neutral current elimination in a three-phase four-wire grid-connected system. It is shown through experimental studies that switching losses in the four-leg voltage source inverter are appreciably reduced to a maximum of 33% in three-dimensional space vector modulation without NULL vector as the number of switches controlled at any instant of time is six out of eight. The new proposed technique is compared with three-dimensional space vector modulation with null vector. Experimental results are given to show the validity of the proposed switching control strategy. [ABSTRACT FROM AUTHOR]

This paper presents a novel double uneven power converter-based dc–dc converter and its design and control methods. The main objectives are to reduce the power losses in the power semiconductor devices and to reduce the output filter inductance in a high-power (megawatt-level) dc–dc converter. The proposed converter utilizes two full-bridge converters in a special way to realize zero-current switching and to reduce the output filter inductance. The advantages of the proposed converter become more significant for high-power applications. A comparative simulation for a dc-grid wind farm application has been performed to verify the effectiveness of the proposed converter in high-power applications. It has been shown that the proposed converter not only requires less filter inductance but also has less power losses in the semiconductor devices. A small-scale prototype has been built to verify the operational principle of the proposed converter. [ABSTRACT FROM PUBLISHER]

In this paper, a model predictive scheme is proposed to control the grid-connected high-power four-level diode-clamped inverter. To predict the future behavior of active and reactive grid power values and dc link capacitor voltages, a discrete-time model of the inverter is developed in synchronous reference frame. The controller uses all the possible switching states of the inverter for the prediction and evaluates them using a cost function. The switching state, which minimizes the cost function, is then chosen and applied at the next sampling interval. The switching frequency minimization is also achieved by including an extra constraint in the cost function. A simplified extrapolation method with reduced computational burden is proposed to safeguard the semiconductor devices during the dynamic changes in reference power values. The performance of the proposed method is investigated with the perturbations in the grid filter and dc link parameters. The feasibility of the proposed method is verified through simulation and experimental results, showing good dynamic and steady-state performance. [ABSTRACT FROM PUBLISHER]

In this paper, a model-predictive control of medium voltage, grid-tied four-level diode-clamped inverter for use in high-power wind energy conversion systems is presented. The control objectives such as regulation of net dc-link voltage, reactive power generation to meet the grid operator request, dc-link capacitor voltages balancing, and switching frequency minimization are included in the cost function. The latter objective is an important requirement for high-power converters, and this has been achieved without any modifications to the software or hardware configuration. The future behavior of the grid currents and dc-link voltages is predicted for all the possible switching states using the discrete-time model of the inverter, dc-link, inductive filter, and grid. The switching state that minimizes the cost function has been chosen and applied to the inverter directly. During different operating conditions, the switching frequency is regulated between 750 and 850 Hz with the help of a lookup-table-based weighting factor, and thus, the proposed methodology appears as a promising tool to control the high-power grid-tied inverters. The results obtained through the MATLAB simulations on 4 MVA/4000 V system and dSPACE DS1103-based experiments on 5 kW/208 V prototype are in a close relationship and thus validate the proposed control strategy. [ABSTRACT FROM AUTHOR]

Grid-connected current control plays an important role in the renewable grid-connected system. This paper investigates the grid-connected current hysteresis control of the asymmetry three-level inverter. In order to effectively utilize asymmetry three-level inverter and conquer the disadvantages of traditional hysteresis control, the multistage hysteresis control and current predict hysteresis control are developed. In the multistage hysteresis control method, the switching times of main switches can be declined by regularly adjusting the bus voltage without altering the inductor and bandwidth. In addition, the current predict hysteresis control is developed, which adapts to proper bus voltage without dividing bus switching time. In order to overcome the invalidation issue of the bandwidth in hysteresis control, virtual sample technology is used without increasing real sample frequency. Both simulation and experimental tests have been conducted to verify the efficacy of the proposed methods. [ABSTRACT FROM AUTHOR]

Unbalanced grids introduce performance deterioration for Vienna rectifier topology by producing twice fundamental frequency ripples in dc-link voltage and input active/reactive power. A common current reference generation for the purpose of eliminating the input power ripple, such as dual-frame hybrid vector control, can maintain constant input power and eliminate ripples in dc-link voltage under light voltage unbalanced grids. Under severe unbalanced grids, this type of a control method will fail to work. This paper first analyzes the theoretical operation area of a constant power control method under unbalanced grids, and then a novel control method is proposed. The proposed control method can work under severe unbalanced grids by injecting a small amount of input power ripple and balance the performance of working area and output dc voltage ripples. Finally, the experiment results using the constant power control method are given and validate the performance of the proposed control method. [ABSTRACT FROM PUBLISHER]

Characterized by the low leakage current and high efficiency, a three-level neutral point clamped (3L-NPC) inverter becomes more popular for a transformerless photovoltaic grid connected system. The three-level-stacked neutral point clamped (3L-SNPC) structure is a derivative of 3L-NPC providing more advantages such as a double apparent switching frequency and parallel load current paths. In this paper, the power loss distribution and features of 3L-SNPC are analyzed first when applied to solar inverters. Based on the analysis, a novel 3L-SNPC leg structure is proposed for solar applications in order to reduce the power loss particularly for the low power range, given the fact that solar inverters generally operate in the low power range during most of the daytime. Then, a two-stage solar inverter topology, applying the proposed structure to the phase leg, is described. Further, a split phase controller is applied for the two-stage solar inverter, consisting of the maximum power point tracking control, optimized dc-link voltage control, and grid current control. Finally, a new dead-time elimination pulsewidth modulation strategy is proposed and conveniently implemented to each phase based on the split phase controller. Experimental results are illustrated to demonstrate the applicability of the proposed topology and controller. [ABSTRACT FROM AUTHOR]

This paper presents a new microinverter topology that is intended for single-phase grid-connected PV systems. The proposed microinverter topology is based on a flyback converter, where an extra switch is added to separate the decoupling capacitor from the PV Module, which allows for a high voltage and voltage ripples across its terminals. This results in reducing the power decoupling required capacitance. In this manner, long life-time low power density film capacitors can be used instead of life-time limited high power density electrolytic capacitors, resulting in remarkable increase of microinverter's lifespan. The main advantages of the proposed topology are summarized as: 1) eliminating the double-frequency power ripple using a small film capacitor; 2) using long lifetime film capacitors, which will improve the reliability of the inverter; and 3) requiring no additional circuitry to manage the transformer leakage energy. A 100-W microinverter prototype was built to verify the proposed topology. Experimental results show that the proposed topology and its control scheme can realize the power decoupling, while maintaining very good conversion efficiency numbers. [ABSTRACT FROM AUTHOR]

This paper presents a new methodology for optimal design of transformerless photovoltaic (PV) inverters targeting a cost-effective deployment of grid-connected PV systems. The optimal switching frequency as well as the optimal values and types of the PV inverter components is calculated such that the PV inverter LCOE generated during the PV system lifetime period is minimized. The LCOE is also calculated considering the failure rates of the components, which affect the reliability performance and lifetime maintenance cost of the PV inverter. A design example is presented, demonstrating that compared to the nonoptimized PV inverter structures, the PV inverters designed using the proposed optimization methodology exhibit lower total manufacturing and lifetime maintenance cost and inject more energy into the electric-grid and by that minimizing LCOE. [ABSTRACT FROM AUTHOR]

This paper presents an improved full-bridge three-level (IFBTL) dc/dc converter for a wind turbine in a dc grid by inserting a passive filter into the dc/dc converter to improve the performance of the converter. The passive filter can effectively reduce the voltage stress of the medium frequency transformer in the IFBTL dc/dc converter. A modulation strategy, including two operation modes, is proposed for the IFBTL dc/dc converter. Then, a voltage balancing control strategy is proposed for the IFBTL dc/dc converter. Furthermore, the control of the wind turbine based on the IFBTL dc/dc converter in a dc-grid system is presented. Finally, a small-scale IFBTL dc/dc converter prototype was built and tested in the laboratory, and the results verify the theoretical analysis. [ABSTRACT FROM AUTHOR]

This paper presents a dead-beat predictive direct power control (DPC) strategy and its improved voltage-vector sequences for reversible three-phase grid-connected voltage-source converters (VSCs). The instantaneous variation rates of active and reactive powers, by applying each converter voltage vector in 12 different sectors, are deduced and analyzed. Based on the power variation rates, it is found that the values of the predicted duration times for the two conventional active converter voltage vectors are less than zero when the grid-connected VSC operates as either a rectifier or an inverter. In order to solve this issue, two new alternative vector sequences are proposed and compared. Experimental results on a 1.5 kW reversible grid-connected VSC system are presented to validate the feasibility of the proposed voltage-vector sequences on the dead-beat predictive DPC strategy. [ABSTRACT FROM AUTHOR]

This paper proposes a fault-detection method for an open-switch fault in the switches of grid-connected neutral-point-clamped inverter systems. The proposed method can not only detect the fault condition but also identify the location of the faulty switch. In the proposed method, which is designed by incorporating a simple switching control in the conventional method, the fault condition is detected on the basis of the radius of the Concordia current pattern, and the location of the faulty switch can be identified. By using the proposed method, it is possible to detect the open-switch fault and identify the faulty switch within two fundamental periods, without using additional sensors or performing complex calculations. Simulations and experiments are carried out to confirm the reliability of the proposed fault-detection method. [ABSTRACT FROM AUTHOR]

This paper proposes a novel transformerless grid-connected power converter with negative grounding for a photovoltaic generation system. The negative terminal of the solar cell array can be directly connected to the ground in the proposed grid-connected power converter to avoid the transparent conducting oxide corrosion that occurs in some types of thin-film solar cell array. The proposed grid-connected power converter consists of a dc-dc power converter and a dc-ac inverter. The salient features of the proposed power converter are that some power electronic switches are simultaneously used in both the dc-dc power converter and dc-ac inverter, and only two power electronic switches operate at high switching frequency at the same time (one is in the dc-dc power converter and the other is in the dc-ac inverter). The leakage current of the photovoltaic generation system is reduced because the negative terminal of the solar cell array is connected directly to the ground. Finally, a prototype was developed to verify the performance of the proposed grid-connected power converter. The experimental results show that the performance of the proposed grid-connected power converter is as expected. [ABSTRACT FROM AUTHOR]

The Shangdu power plant has four 600-MW turbine-generators connected to the North-China Grid through two 500-kV transmissions, which are compensated with 45% fixed series capacitors. Extensive studies conducted on the system model indicate that the system suffers from multimodal subsynchronous resonance (SSR). To solve the problem, a countermeasure is developed by combining the supplementary excitation damping control (SEDC) and the torsional stress relay (TSR). In this paper, the characteristics of the SSR problem are investigated. Then the developed SEDC is presented. To validate the effectiveness of the proposed SEDC as well as the results of model studies, field tests were conducted under various operating conditions. The tests fully exposed the realistic threat of SSR in the system. Meanwhile, it is demonstrated that the developed SEDC can improve torsional damping significantly, and thus solve the multimodal SSR problem effectively. This is the first time in China that practical SEDCs have been developed and their ability to mitigate multimodal SSR has been verified in a real series-compensated system. [ABSTRACT FROM AUTHOR]