Search

Discrete-time filters represent a promising solution for pulse-processing in high-energy physics experiments due to their flexibility, reliability, and their capability to synthesize weighting functions with virtually any shape. One of the major concerns when designing one of these filters is to calculate the filter parameters that maximize the signal-to-noise ratio. The classic way to address this problem is to perform the noise analysis using a continuous-time domain approach based on the weighting function concept. However, when addressing the problem from an inadequate time domain, the analysis is not insightful and the resulting expressions are complex and difficult to use for design purposes. In this work, a mathematical framework for a design-oriented analysis of discrete-time filters in the discrete-time domain is presented. This analysis is based on treating the sampled noise as a discrete-time signal, which can be manipulated to obtain a closed-form expression for the front-end noise, suitable for computer automatic evaluation and filter optimization procedures. An example of the optimum filter formulation and computation is presented, in addition to several conclusions about optimum digital filtering. [ABSTRACT FROM PUBLISHER]

Charge amplifiers represent the standard solution to amplify signals from capacitive detectors in high energy physics experiments. In a typical front-end, the noise due to the charge amplifier, and particularly from its input transistor, limits the achievable resolution. The classic approach to attenuate noise effects in MOSFET charge amplifiers is to use the maximum power available, to use a minimum-length input device, and to establish the input transistor width in order to achieve the optimal capacitive matching at the input node. These conclusions, reached by analysis based on simple noise models, lead to sub-optimal results. In this work, a new approach on noise analysis for charge amplifiers based on an extension of the gm/ID methodology is presented. This method combines circuit equations and results from SPICE simulations, both valid for all operation regions and including all noise sources. The method, which allows to find the optimal operation point of the charge amplifier input device for maximum resolution, shows that the minimum device length is not necessarily the optimal, that flicker noise is responsible for the non-monotonic noise versus current function, and provides a deeper insight on the noise limits mechanism from an alternative and more design-oriented point of view. [ABSTRACT FROM PUBLISHER]

Presents information on a study which discussed a modeling approach for integrated capacitors based on the partial-element-equivalent-circuit formulation. Modeling methodology; Electrical measurements and model verification; Simulation case studies on the 3M C-Ply technology.