Search

We present a highly configurable, low-power, low-area, low-EVM, SAW-less transmitter (TX) architecture that is based on a dynamically biased power mixer. All FDD/TDD bands from 0.7 to 2.7 GHz for 4G LTE Rel-11 and 3G $\bf{HSPA} + $ are supported in addition to 2G quad bands. The power-mixer bias current is dynamically adjusted based on the instantaneous baseband signal swing using a fully-differential hybrid full-wave rectifier/envelope-detector circuit. Dynamic biasing leads to greater than 50% current savings when compared to fixed-biasing while providing a higher output power with better linearity. Implemented in 28 nm CMOS technology, the TX shows better than $- \bf{157}\;\bf{dBc}/\bf{Hz}$ RX-band noise emission and $- \bf{41}\;\bf{dBc}$ ACLR for output powers up-to $+ \bf{4}\;\bf{dBm}$ across all 3G/4G bands, while demonstrating above 80 dB of gain control range. In addition, the TX can be configured to provide better than $- \bf{65}\;\bf{dBc}$ CIM3, allowing it to meet stringent spurious emission specifications when transmitting 1 RB 4G LTE signals in B13/B26/B1.

BSIM6 is the latest industry-standard bulk MOSFET model from the BSIM group developed specially for accurate analog and RF circuit designs. The popular real-device effects have been brought from BSIM4. The model shows excellent source-drain symmetry during both dc and small signal analysis, thus giving excellent results during analog and RF circuit simulations, e.g., harmonic balance simulation. The model is fully scalable with geometry, biases, and temperature. The model has a physical charge-based capacitance model including polydepletion and quantum-mechanical effect thereby giving accurate results in small signal and transient simulations. The BSIM6 model has been extensively validated with industry data from 40-nm technology node.

We present a phenomenological compact model of the inversion charge centroid considering both the structural and electrical confinements in multigate FETs. The developed new model shows a good match with Technology-CAD (TCAD) data for both physical parameters such as fin thickness in FinFET and wire radius in cylindrical FET, channel doping, and electrical bias variation. With the introduction of fitting parameters, the model is capable of handling hole and electron carriers, various channel materials, and process variations, such as fin shape, etc.

Two turn-key surface potential-based compact models are developed to simulate multigate transistors for integrated circuit (IC) designs. The BSIM-CMG (common-multigate) model is developed to simulate double-, triple-, and all-around-gate FinFETs and it is selected as the world's first industry-standard compact model for the FinFET. The BSIM-IMG (independent-multigate) model is developed for independent double-gate, ultrathin body (UTB) transistors, capturing the dynamic threshold voltage adjustment with back gate bias. Starting from long-channel devices, the basic models are first obtained using a Poisson-carrier transport approach. The basic models agree with the results of numerical two-dimensional device simulators. The real-device effects then augment the basic models. All the important real-device effects, such as short-channel effects (SCEs), quantum mechanical confinement effects, mobility degradation, and parasitics are included in the models. BSIM-CMG and BSIM-IMG have been validated with hardware silicon-based data from multiple technologies. The developed models also meet the stringent quality assurance tests expected of production level models.

With aggressive technology scaling and heightened variability, circuits such as SRAMs and DRAMs have become vulnerable to random telegraph noise (RTN). The bias dependence (i.e., non-stationarity), bi-directional coupling, and high inter-device variability of RTN present significant challenges to understanding its circuit-level effects. In this paper, we present two computer-aided design (CAD) tools, SAMURAI and MUSTARD, for accurately estimating the impact of non-stationary RTN on SRAMs and DRAMs. While traditional (stationary) analysis is often overly pessimistic (e.g., it overestimates RTN-induced SRAM failure rates), the predictions made by SAMURAI and MUSTARD are more reliable by virtue of non-stationary analysis.

In this paper, we present an accurate and computationally efficient model for circuit simulation of ultrathin-body silicon-on-insulator MOSFETs with strong back-gate control. This work advances previous works in terms of numerical accuracy, computational efficiency, and behavior of the higher order derivatives of the drain current. We propose a consistent analytical solution for the calculation of front- and back-gate surface potentials and inversion charge. The accuracy of our surface potential calculation is on the order of nanovolts. The drain current model includes velocity saturation, channel-length modulation, mobility degradation, quantum confinement effect, drain-induced barrier lowering, and self-heating effect. The model has correct behavior for derivatives of the drain current and shows an excellent agreement with experimental data for long- and short-channel devices with 8-nm-thin silicon body and 10-nm-thin BOX.

In this letter, we present a thermal network extraction methodology to characterize self-heating effect using two-port RF measurements. We show the technique of determining isothermal condition using only the self-heating (thermal) dominated range of the spectrum. We use a self-consistent self-heating extraction scheme using both the real and imaginary parts of drain port admittance parameters. Appropriate thermal network is investigated, and a large amount of temperature rise due to self-heating is confirmed for short channel silicon-on-insulator MOSFETs with ultrathin body and buried oxide.