Search

Reinforced concrete structures in the marine environment face serious corrosion risks. Coating protection and adding corrosion inhibitors are the most economical and effective methods. In this study, a nano-composite anti-corrosion filler with a mass ratio of CeO2:GO = 4:1 was prepared by hydrothermally growing cerium oxide on the surface of graphene oxide. The filler was mixed with pure epoxy resin at a mass fraction of 0.5% to prepare a nano-composite epoxy coating. The basic properties of the prepared coating were evaluated from the aspects of surface hardness, adhesion grade, and anti-corrosion performance on Q235 low carbon steel subjected to simulated seawater and simulated concrete pore solutions. Results showed that after 90 days of service, the corrosion current density of the nanocomposite coating mixed with corrosion inhibitor was the lowest (Icorr = 1.001 × 10−9 A/cm2), and the protection efficiency was up to 99.92%. This study provides a theoretical foundation for solving the corrosion problem of Q235 low carbon steel in the marine environment. [ABSTRACT FROM AUTHOR]

The lamellar structure of graphene oxide and the filling effect of nano-cerium oxide particles together provide a good barrier and stability to coating. In this paper, cerium oxide-graphene oxide (4:1) nanocomposite was prepared by the hydrothermal synthesis method. The effect of cerium oxide–graphene oxide (4:1) nanocomposite on the anticorrosion properties of epoxy coating in simulated acid rain solution was studied by open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), Mott–Schottky curve, Tafel curve, and micromorphological characterization, in order to compare it with pure epoxy coating, graphene oxide epoxy coating, and cerium oxide epoxy coating. The obtained results showed that cerium oxide–graphene oxide (4:1) epoxy coating's protection efficiency was as high as 98.62%. These results indicated that cerium oxide–graphene oxide modified anticorrosive coating had an excellent application prospect in an acid rain environment. Meanwhile, owing to the poor protection ability of epoxy resin and unstably hydrolysis product of CeO2 to the acidic medium, the resistance of CeO2–GO (4:1)/EP coating to acidic corrosive medium was relatively poorer than that of neutral and saline-alkali corrosive medium. [ABSTRACT FROM AUTHOR]

In the marine service environment, metal materials have a serious risk of corrosion. The corrosion rate of metal materials will be accelerated by the dual action of temperature change and alkali salt in saline-alkali environment. In order to delay the metal materials' corrosion rate and prolong their service life, this paper used a CeO2–GO (4:1) nanocomposite prepared by the hydrothermal synthesis method to make an anticorrosion coating. The anticorrosion performance was evaluated by stereo microscope and 3D images of the corrosion site were fitted for calculation. The state evolution of the CeO2–GO (4:1)/EP coating immerged in a simulated saline-alkali solution was studied by open circuit potential (OCP), electrochemical alternating current impedance spectroscopy (EIS), Mott–Schottky curve and Tafel curve. The results indicated that CeO2–GO (4:1) nanocomposites exhibited good resistance compared with graphene oxide and nano cerium oxide in a simulated saline-alkali environment. The research in this paper lays a firm theoretical foundation for the application of nano cerium-oxide-modified graphene oxide anticorrosive coating in saline-alkali environment engineering. [ABSTRACT FROM AUTHOR]

Graphene is a two-dimensional sheet of regular hexagonal honeycomb lattice formed by sp2 hybrid orbital bonding, with only one layer thickness of a single atom, which is known as the "super king" of the 21st century. Previous studies have shown that cerium oxide-graphene oxide (CeO2-GO(4:1)) nanocomposites eliminated the agglomeration of graphene to some extent and the CeO2-GO(4:1) epoxy coating could be prepared with good anti-corrosion performance. In this paper, CeO2-GO(4:1) nanocomposites were prepared by the hydrothermal synthesis method, and the three-electrode method was used for electrochemical tests. The state evolution of CeO2-GO(4:1)/EP coating and the synergy between CeO2-GO(4:1)/EP and corrosion inhibitor in simulated seawater solution with different concentrations (20%, 40%, 60%) were analyzed and illustrated by Optical Microscope (OM) characterization, Open Circuit Potential (OCP), Electrochemical alternating current Impedance Spectroscopy (EIS), Mott–Schottky curve and Tafel curve. The results indicated that CeO2-GO(4:1) nanocomposites showed good corrosion resistance in a marine environment. This research lays a solid theoretical foundation for the application of cerium oxide-modified graphene oxide anticorrosive coating in marine engineering. [ABSTRACT FROM AUTHOR]

Due to its special two-dimensional lamellar structure, graphene possesses an excellent shielding effect, hydrophobic characteristics and large specific surface area, which can effectively isolate the internal structure from the external corrosive media. However, lamellar graphene is easy to stack and agglomerate, which limits its anti-corrosion performance. In this paper, cerium oxide-graphene oxide (CeO2-GO) nanocomposites were prepared by a hydrothermal synthesis method. Field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM) were applied for microstructure examination, showing that a large number of nanoscale granular cerium oxide grew on the lamellar graphene oxide surface, which improved the dispersion performance of graphene inside the matrix. The anti-corrosion properties of the coating were analyzed and illustrated by open circuit potential (OCP), frequency response analysis, Tafel curve and Mott–Schottky curve. The results indicated that the CeO2-GO (4:1) nanocomposite not only eliminated the agglomeration of graphene to some extent, but also prepared the graphene epoxy coating with good dispersion, which further promoted its anti-corrosion performance. The paper proposed a feasible solution for GO dispersion in cement-based materials and lays a solid theoretical foundation for the engineering application of cerium oxide-graphene oxide modified anticorrosive coating. [ABSTRACT FROM AUTHOR]