Search

Covering the full texts of all papers published in MDPI's Remote Sensing between 2009 and 2021, in-depth scientometric analyses were conducted. Trends in publications show an increase in the overall number of papers. A relative increase in papers using SAR sensors and a relative decrease in papers using optical remote sensing can also be seen. The full-text analyses reveal distinctive styles and writing patterns for papers from different sub-fields of remote sensing and for different countries and even cities. While a slight increase in the readability of abstracts is detected over time, the overall readability of papers is decreasing. Institutional co-authorship analysis reveals the ongoing 'scientific decoupling' between China and the USA in remote sensing. Using scientometric full-text analysis, current trends and developments are revealed. [ABSTRACT FROM AUTHOR]

Due to budget and sensor technology constraints, a single sensor cannot simultaneously provide observational images with both a high spatial and temporal resolution. To solve the above problem, the spatiotemporal fusion (STF) method was proposed and proved to be an indispensable tool for monitoring land surface dynamics. There are relatively few systematic reviews of the STF method. Bibliometrics is a valuable method for analyzing the scientific literature, but it has not yet been applied to the comprehensive analysis of the STF method. Therefore, in this paper, we use bibliometrics and scientific mapping to analyze the 2967 citation data from the Web of Science from 1991 to 2023 in a metrological manner, covering the themes of STF, data fusion, multi-temporal analysis, and spatial analysis. The results of the literature analysis reveal that the number of articles displays a slow to rapid increase during the study period, but decreases significantly in 2023. Research institutions in China (1059 papers) and the United States (432 papers) are the top two contributors in the field. The keywords "Sentinel", "deep learning" (DL), and "LSTM" (Long Short-Term Memory) appeared most frequently in the past three years. In the future, remote sensing spatiotemporal fusion research can address more of the limitations of heterogeneous landscapes and climatic conditions to improve fused images' accuracy. [ABSTRACT FROM AUTHOR]

Vegetation indices provide information for various precision-agriculture practices, by providing quantitative data about crop growth and health. To provide a concise and up-to-date review of vegetation indices in precision agriculture, this study focused on the major vegetation indices with the criterion of their frequency in scientific papers indexed in the Web of Science Core Collection (WoSCC) since 2000. Based on the scientific papers with the topic of "precision agriculture" combined with "vegetation index", this study found that the United States and China are global leaders in total precision-agriculture research and the application of vegetation indices, while the analysis adjusted for the country area showed much more homogenous global development of vegetation indices in precision agriculture. Among these studies, vegetation indices based on the multispectral sensor are much more frequently adopted in scientific studies than their low-cost alternatives based on the RGB sensor. The normalized difference vegetation index (NDVI) was determined as the dominant vegetation index, with a total of 2200 studies since the year 2000. With the existence of vegetation indices that improved the shortcomings of NDVI, such as enhanced vegetation index (EVI) and soil-adjusted vegetation index (SAVI), this study recognized their potential for enabling superior results to those of NDVI in future studies. [ABSTRACT FROM AUTHOR]

Most Penman-Monteith-Leuning (PML) evapotranspiration (ET) modeling studies are dominated by consideration of meteorological, energy, and land use information, etc., but the dynamic coupling of soil moisture content (SM), especially in terms of improving accuracy through assimilation, lacks sufficient attention. This paper proposes a research framework for the dynamic coupling simulation of PML model and SM based on data assimilation, i.e., the remote sensing monitored SM is combined with soil evaporation of PML to obtain high-precision time-continuous SM data through data assimilation; simultaneously, dynamical soil evaporation coefficients are generated based on the assimilated SM to improve the simulation accuracy of the PML model. The new scheme was validated at a typical irrigation zone in north China and showed obvious improvements in both SM and ET simulations. Moreover, the effect of the assimilation of SM on the simulation accuracy of ET for different crop growth periods is further analyzed. This research provides a new idea for the coupling simulation of the SM and PML models. [ABSTRACT FROM AUTHOR]

The point cloud segmentation method plays an important role in practical applications, such as remote sensing, mobile robots, and 3D modeling. However, there are still some limitations to the current point cloud data segmentation method when applied to large-scale scenes. Therefore, this paper proposes an adaptive clustering segmentation method. In this method, the threshold for clustering points within the point cloud is calculated using the characteristic parameters of adjacent points. After completing the preliminary segmentation of the point cloud, the segmentation results are further refined according to the standard deviation of the cluster points. Then, the cluster points whose number does not meet the conditions are further segmented, and, finally, scene point cloud data segmentation is realized. To test the superiority of this method, this study was based on point cloud data from a park in Guilin, Guangxi, China. The experimental results showed that this method is more practical and efficient than other methods, and it can effectively segment all ground objects and ground point cloud data in a scene. Compared with other segmentation methods that are easily affected by parameters, this method has strong robustness. In order to verify the universality of the method proposed in this paper, we test a public data set provided by ISPRS. The method achieves good segmentation results for multiple sample data, and it can distinguish noise points in a scene. [ABSTRACT FROM AUTHOR]

Pine wilt disease (PWD) is a forest disease characterized by rapid spread and extremely high lethality, posing a serious threat to the ecological security of China's forests and causing significant economic losses in forestry. Given the extensive forestry area, limited personnel for inspection and monitoring, and high costs, utilizing UAV-based remote sensing monitoring for diseased trees represents an effective approach for controlling the spread of PWD. However, due to the small target size and uneven scale of pine wilt disease, as well as the limitations of real-time detection by drones, traditional disease tree detection algorithms based on RGB remote sensing images do not achieve an optimal balance among accuracy, detection speed, and model complexity due to real-time detection limitations. Consequently, this paper proposes Light-ViTeYOLO, a lightweight pine wilt disease detection method based on Vision Transformer-enhanced YOLO (You Only Look Once). A novel lightweight multi-scale attention module is introduced to construct an EfficientViT feature extraction network for global receptive field and multi-scale learning. A novel neck network, CACSNet(Content-Aware Cross-Scale bidirectional fusion neck network), is designed to enhance the detection of diseased trees at single granularity, and the loss function is optimized to improve localization accuracy. The algorithm effectively reduces the number of parameters and giga floating-point operations per second (GFLOPs) of the detection model while enhancing overall detection performance. Experimental results demonstrate that compared with other baseline algorithms, Light-ViTeYOLO proposed in this paper has the least parameter and computational complexity among related algorithms, with 3.89 MFLOPs and 7.4 GFLOPs, respectively. The FPS rate is 57.9 (frames/s), which is better than the original YOLOv5. Meanwhile, its mAP@0.5:0.95 is the best among the baseline algorithms, and the recall and mAP@0.5 slightly decrease. Our Light-ViTeYOLO is the first lightweight method specifically designed for detecting pine wilt disease. It not only meets the requirements for real-time detection of pine wilt disease outbreaks but also provides strong technical support for automated forestry work. [ABSTRACT FROM AUTHOR]

This review will serve as an entry point for international researchers who would like to tap into the vast scientific potential of Chinese-language literature on oceanic fronts. We focused on observational physical oceanography studies of marine fronts. A thorough bibliographic search netted 95 papers published in 1982–2023, with a sharp increase in the total number of papers from 2006–2010 to 2011–2015, when this number almost tripled. This trend continued unabated through the early 2020s. The sharp increase in Chinese-language publications preceded by several years a rapid increase in English-language publications in the same field. Regionally, the overwhelming majority of papers is focused on the China Seas, particularly the East China Seas and northern South China Sea. Elsewhere, a number of papers were dedicated to the Southern Ocean and North Atlantic. Thematically, papers on remote sensing of ocean fronts dominate the literature, with special attention to the development of front-detection algorithms that can be applied to satellite data on sea surface temperature, salinity, chlorophyll, and sea level anomaly. Numerous papers on marine fronts in the China Seas present important results that have to be considered by international researchers. Overall, this review emphasizes the significant contributions made by Chinese oceanographers, particularly to studies of the frontal oceanography of the China Seas. [ABSTRACT FROM AUTHOR]

Drylands are vast and face threats from climate change and human activities. Traditional reviews cannot capture interdisciplinary knowledge, but bibliometric analysis provides valuable insights. Our study conducted bibliometric research of scientific production on climate change and land degradation in drylands using remote sensing. We examined 1527 Scopus-indexed publications to identify geographic and thematic hotspots, extracting leading authors, journals, and institutions. China leads in publications, followed by the US, Germany, and Australia. The US has the highest citation count. Collaboration networks involve the US, China, and European countries. There has been an exponential increase in remote sensing of land degradation in drylands (RSLDD) publications since 2011. Key journals include "International Journal of Remote Sensing" and "Remote Sensing of Environment". The analysis highlights the growing interest in the field, driven by Australia, the US, and China. Key areas of study are vegetation dynamics and land use change. Future perspectives for this scientific field involve promoting collaboration and exploring emerging technologies for comprehensive land degradation and desertification research. [ABSTRACT FROM AUTHOR]

In the current context of carbon neutrality, afforestation is an effective means of absorbing carbon dioxide. Stock can be used not only as an economic value index of forest wood resources but also as an important index of biomass and carbon storage estimation in forest emission reduction project evaluation. In this paper, we propose a data-driven machine learning framework and method for predicting plantation stock based on airborne LiDAR + satellite remote sensing, and carried out experimental verification at the site of the National Forest emission reduction project in Southern China. We used step-up regression and random forest (RF) to screen LiDAR and Landsat 8 OLI multispectral indicators suitable for the prediction of plantation stock, and constructed a plantation stock model based on machine learning (support vector machine regression, RF regression). Our method is compared with traditional statistical methods (stepwise regression and partial least squares regression). Through the verification of 57 plantation field survey data, the accuracy of the stand estimation model constructed using the RF method is generally better (ΔR2 = 0.01~0.27, ΔRMSE = 1.88~13.77 m3·hm−2, ΔMAE = 1.17~13.57 m3·hm−2). The model evaluation accuracy based on machine learning is higher than that of the traditional statistical method, and the fitting R2 is greater than 0.91, while the fitting R2 of the traditional statistical method is 0.85. The best fitting models were all support vector regression models. The combination of UAV point clouds and satellite multi-spectral images has the best modeling effect, followed by LiDAR point clouds and Landsat 8. At present, this method is only applicable to artificial forests; further verification is needed for natural forests. In the future, the density and quality of higher clouds could be increased. The validity and accuracy of the method were further verified. This paper provides a method for predicting the accumulation of typical Chinese plantations at the forest farm scale based on the "airborne LiDAR + satellite remote sensing" data-driven machine learning modeling, which has potential application value for the current carbon neutrality goal of the southern plantation forest emission reduction project. [ABSTRACT FROM AUTHOR]

Spartina alterniflora (S. alterniflora) has grown rapidly in China since its introduction in 1979, showing the trend of alien species invasion, which has seriously affected the ecosystem balance of coastal wetlands. The temporal and spatial expansion law of S. alterniflora can be obtained through remote sensing monitoring, which can provide a reference and basis for S. alterniflora management. This paper presents a method for extracting and mapping S. alterniflora based on phenological characteristics. The coastal areas of the Yangtze River Delta Urban Agglomeration are selected as the research area, and the Landsat time series data from 1990 to 2022 on the Google Earth Engine (GEE) platform are used to support the experiment in this paper. Firstly, the possible growing area of S. alterniflora was extracted using the normalized differential moisture index (NDMI), normalized differential vegetation index (NDVI), and normalized differential water index (NDWI); Then, the time series curve characterizing the phenological characteristics of vegetation was constructed using the vegetation index to determine the difference phase of phenological characteristics between S. alterniflora and other vegetation. Finally, a decision tree was constructed based on the phenological feature difference phase data to extract S. alterniflora, and it is applied to the analysis of temporal and spatial changes of S. alterniflora in the study area from 1990 to 2022. The results show that the area of S. alterniflora increased from ~1426 ha in 1990 to ~44,508 ha in 2022. However, the area of S. alterniflora began to show negative growth in 2015 due to the construction of nature reserves and ecological management. The results of correlation analysis showed that the growth of C. japonicum was significantly affected by temperature stress and weakly affected by precipitation. This study verified that Landsat time series images can effectively extract vegetation phenological information, which has strong feasibility for extraction and dynamic monitoring of S. alterniflora and provides technical support for the management and monitoring of invasive plants in coastal wetlands. [ABSTRACT FROM AUTHOR]

The timely and accurate acquisition of information on the distribution of the crop planting structure in the Loess Plateau of eastern Gansu Province, one of the most important agricultural areas in Western China, is crucial for promoting fine management of agriculture and ensuring food security. This study uses multi-temporal high-resolution remote sensing images to determine optimal segmentation scales for various crops, employing the estimation of scale parameter 2 (ESP2) tool and the Ratio of Mean Absolute Deviation to Standard Deviation (RMAS) model. The Canny edge detection algorithm is then applied for multi-scale image segmentation. By incorporating crop phenological factors and using the L1-regularized logistic regression model, we optimized 39 spatial feature factors—including spectral, textural, geometric, and index features. Within a multi-level classification framework, the Random Forest (RF) classifier and Convolutional Neural Network (CNN) model are used to classify the cropping patterns in four test areas based on the multi-scale segmented images. The results indicate that integrating the Canny edge detection algorithm with the optimal segmentation scales calculated using the ESP2 tool and RMAS model produces crop parcels with more complete boundaries and better separability. Additionally, optimizing spatial features using the L1-regularized logistic regression model, combined with phenological information, enhances classification accuracy. Within the OBIC framework, the RF classifier achieves higher accuracy in classifying cropping patterns. The overall classification accuracies for the four test areas are 91.93%, 94.92%, 89.37%, and 90.68%, respectively. This paper introduced crop phenological factors, effectively improving the extraction precision of the shattered agricultural planting structure in the Loess Plateau of eastern Gansu Province. Its findings have important application value in crop monitoring, management, food security and other related fields. [ABSTRACT FROM AUTHOR]

The current deformation and stable state of slopes with historical shatter signs is a concern for engineering construction. Suspected landslide scarps were discovered at the rear edge of the Genie slope on the Tibetan Plateau during a field investigation. To qualitatively determine the current status of the surface deformation of this slope, this study used high-resolution optical remote sensing, airborne light detection and ranging (LiDAR), and interferometric synthetic aperture radar (InSAR) technologies for comprehensive analysis. The interpretation of high-resolution optical and airborne LiDAR data revealed that the rear edge of the slope exhibits three levels of scarps. However, no deformation was detected with differential InSAR (D-InSAR) analysis of ALOS-1 radar images from 2007 to 2008 or with Stacking-InSAR and small baseline subset InSAR (SBAS-InSAR) processing of Sentinel-1A radar images from 2017 to 2020. This study verified the credibility of the InSAR results using the standard deviation of the phase residuals, as well as in-borehole displacement monitoring data. A conceptual model of the slope was developed by combining field investigation, borehole coring, and horizontal exploratory tunnel data, and the results indicated that the slope is composed of steep anti-dip layered dolomite limestone and that the scarps at the trailing edges of the slope were caused by historical shallow toppling. Unlike previous remote sensing studies of deformed landslides, this paper argues that remote sensing results with reliable accuracy are also applicable to the study of undeformed slopes and can help make preliminary judgments about the stability of unexplored slopes. The study demonstrates that the long-term consistency of InSAR results in integrated remote sensing can serve as an indicator for assessing slope stability. [ABSTRACT FROM AUTHOR]

Land desertification is a key environmental problem in China, especially in Northwest China, where it seriously affects the sustainable development of natural resources. In this paper, we combine high-resolution satellite remote sensing images and UAV (unmanned aerial vehicle) visible light images to extract desert vegetation data and quickly locate and accurately monitor land desertification in relevant areas according to changes in vegetation coverage. Due to the strong light and dry climate of deserts in Northwest China, which results in deeper vegetation shadow texture and mostly dry shrubs with fewer stems and leaves, the accuracy of the vegetation index commonly used in visible remote sensing image classification is not able to meet the requirements for monitoring and evaluating land desertification. For this reason, in this paper, we took the Hangjin Banner in Bayannur as an example and constructed a new vegetation index, the HSVGVI (hue–saturation–value green enhancement vegetation index), based on the HSV (hue–saturation–value) color space using channel enhancement that can improve the extraction accuracy of desert vegetation and reduce misclassification. In addition, in order to further test the extraction accuracy, samples of densely vegetated and multi-shaded areas were divided in the study area according to the accuracy-influencing factors. At the same time, the HSVGVI was compared with the vegetation indices EXG (excess green index), RGBVI (red–green–blue vegetation index), MGRVI (modified green–red vegetation index), NGBDI (normalized green–red discrepancy index), and VDVI (visible-band discrepancy vegetation index) constructed based on the RGB (red–green–blue) color space. The experimental results show that the extraction accuracy of the EXG and other vegetation indices constructed in RGB color space can only reach 70%, while the extraction accuracy of the HSVGVI can reach more than 95%. In summary, the HSVGVI proposed in this paper can better realize the extraction of desert vegetation data and can provide a reliable technical tool for monitoring and evaluating land desertification. [ABSTRACT FROM AUTHOR]

Lanzhou City is located in the semi-arid region of northwest China, which experiences serious desertification. Moreover, the high intensity of land development, with the accelerated industrialization and urbanization, causes increasingly aggravated conflict between humans and the environment. Exploring the response of the ecological environment quality to the natural environment and anthropogenic activities is important to protect the sustainable development of urban economic construction and the environment. Based on the Google Earth Engine (GEE) platform, this paper constructed a modified Remote Sensing Ecological Index (MRSEI) model which could reflect the ecological environment quality by integrating the desertification index (DI) into the Remote Sensing Ecological index (RSEI) model. This paper explores the spatiotemporal variation in the environmental quality from 2000 to 2020 in Lanzhou, China, and analyzes the natural and anthropogenic factors affecting the environment quality in terms of temperature, precipitation, gross domestic product (GDP), land use, night lighting, and population. The results showed that the mean value of MRSEI ranged from 0.254 to 0.400. The area undergoing fast growth in ecological quality was in the northwestern part of Lanzhou, and the area of decrease was in the central part. Various factors have different degrees of influence on the ecosystem, with temperature, precipitation, and land use having a greater impact, and GDP and population having a limited impact. Precipitation and temperature showed a strong impact when interacting with other factors, demonstrating that precipitation and temperature were also key factors affecting MRSEI. Overall, climate change and the implementation of ecological restoration projects have led to an improvement in the quality of the ecological environment in Lanzhou. This study provides a reference for understanding the spatiotemporal changes in the ecological environment in semi-arid Lanzhou and is conducive to formulating proper protection strategies. [ABSTRACT FROM AUTHOR]

Using a shape model (SM) is a typical method to determine the phenological phases of crops with long-time-series satellite remote sensing data. The average AGDD-based shape model (AAGDD-SM) takes temperature into account compared to SM, however, the commonly used daily average temperature is not sufficient to determine the exact AGDD owing to the possibly significant changes in temperatures throughout the day. In this paper, a modified shape model was proposed for the better estimation of phenological dates and it is incorporated into the continuous AGDD (CAGDD) which was calculated based on temperatures from a continuous 24 h within a day, different from the calendar day or the average AGDD indicators. In this study, the CAGDD replaced the abscissa of the NDVI growth curve over a 5-year period (2014 to 2018, excluding 2015) for a test site of early rice in Jiangxi province of China. Four key phenological phases, including the reviving, tillering, heading and anthesis phases, were selected and determined with reference to the field-observed phenological data. The results show that compared with the AAGDD-SM, the method proposed in this paper has basically improved the prediction of each phenological period. For those cases where the average temperature is lower than the minimum temperatures (K1) but the effective accumulated temperature is not zero, more accurate AGDD can be calculated according to the method in this paper. [ABSTRACT FROM AUTHOR]

With escalating human activities and the substantial emissions of greenhouse gases, global warming intensifies. This phenomenon has led to increased occurrences of various extreme hydrological events, precipitating significant changes in lakes and rivers across the Qinghai Tibet Plateau. Therefore, accurate information extraction about and delineation of water bodies are crucial for lake monitoring. This paper proposes a methodology based on the Normalized Difference Water Index (NDWI) and Gumbel distribution to determine optimal segmentation thresholds. Focusing on Qinghai Lake, this study utilizes multispectral characteristics from the US Landsat satellite for analysis. Comparative assessments with seven alternative methods are conducted to evaluate accuracy. Employing the proposed approach, information about water bodies in Qinghai Lake is extracted over 38 years, from 1986 to 2023, revealing trends in area variation. Analysis indicates a rising trend in Qinghai Lake's area following a turning point in 2004. To investigate this phenomenon, Pearson correlation analysis of temperature and precipitation over the past 38 years is used and unveils the fact that slight precipitation impacts on area and that there is a positive correlation between temperature and area. In conclusion, this study employs remote sensing data and statistical analysis to comprehensively investigate mechanisms driving changes in Qinghai Lake's water surface area, providing insights into ecological shifts in lake systems against the backdrop of global warming, thereby offering valuable references for understanding and addressing these changes. [ABSTRACT FROM AUTHOR]

Wildfires cause great losses to the ecological environment, economy, and people's safety and belongings. As a result, it is crucial to establish wildfire susceptibility models and delineate fire risk levels. It has been proven that the use of remote sensing data, such as meteorological and topographical data, can effectively predict and evaluate wildfire susceptibility. Accordingly, this paper converts meteorological and topographical data into fire-influencing factor raster maps for wildfire susceptibility prediction. The continuous convolutional neural network (CCNN for short) based on coordinate attention (CA for short) can aggregate different location information into channels of the network so as to enhance the feature expression ability; moreover, for different patches with different resolutions, the improved CCNN model does not need to change the structural parameters of the network, which improves the flexibility of the network application in different forest areas. In order to reduce the annotation of training samples, we adopt an active learning method to learn positive features by selecting high-confidence samples, which contributes to enhancing the discriminative ability of the network. We use fire probabilities output from the model to evaluate fire risk levels and generate the fire susceptibility map. Taking Chongqing Municipality in China as an example, the experimental results show that the CA-based CCNN model has a better classification performance; the accuracy reaches 91.7%, and AUC reaches 0.9487, which is 5.1% and 2.09% higher than the optimal comparative method, respectively. Furthermore, if an accuracy of about 86% is desired, our method only requires 50% of labeled samples and thus saves about 20% and 40% of the labeling efforts compared to the other two methods, respectively. Ultimately, the proposed model achieves the balance of high prediction accuracy and low annotation cost and is more helpful in classifying fire high warning zones and fire-free zones. [ABSTRACT FROM AUTHOR]

Traditionally, the assessment of heavy metal concentrations using remote sensing technology is sample-intensive, with expensive model development. Using a mining area case study of Daxigou, China, we propose a cross-time-domain transfer learning model to monitor heavy metal pollution using samples collected from different time domains. Specifically, spectral indices derived from Landsat 8 multispectral images, terrain, and other auxiliary data correlative to soil heavy metals were prepared. A cross time-domain sample transfer learning model proposed in the paper based on the TrAdaBoost algorithm was used for the Cu content mapping in the topsoil by selective use of soil samples acquired in 2017 and 2019. We found that the proposed model accurately estimated the concentration of Cu in the topsoil of the mining area in 2019 and performed better than the traditional TrAdaBoost algorithms. The goodness of fit (R2) of the test set increased from 0.55 to 0.66; the relative prediction deviation (RPD) increased from 1.37 to 1.76; and finally, the root-mean-square deviation (RMSE), decreased from 8.33 to 7.24 mg·kg−1. The proposed model is potentially applicable to more accurate and inexpensive monitoring of heavy metals, facilitating remediation-related efforts. [ABSTRACT FROM AUTHOR]

In the context of global sustainable development, solar energy is very widely used. The installed capacity of photovoltaic panels in countries around the world, especially in China, is increasing steadily and rapidly. In order to obtain accurate information about photovoltaic panels and provide data support for the macro-control of the photovoltaic industry, this paper proposed a hierarchical information extraction method, including positioning information and shape information, and carried out photovoltaic panel distribution mapping. This method is suitable for large-scale centralized photovoltaic power plants based on multi-source satellite remote sensing images. This experiment takes the three northwest provinces of China as the research area. First, a deep learning scene classification model, the EfficientNet-B5 model, is used to locate the photovoltaic power plants on 16-m spatial resolution images. This step obtains the area that contains or may contain photovoltaic panels, greatly reducing the study area with an accuracy of 99.97%. Second, a deep learning semantic segmentation model, the U2-Net model, is used to precisely locate photovoltaic panels on 2-m spatial resolution images. This step achieves the exact extraction results of the photovoltaic panels from the area obtained in the previous step, with an accuracy of 97.686%. This paper verifies the superiority of a hierarchical information extraction method in terms of accuracy and efficiency through comparative experiments with DeepLabV3+, U-Net, SegNet, and FCN8s. This meaningful work identified 180 centralized photovoltaic power plants in the study area. Additionally, this method makes full use of the characteristics of different remote sensing data sources. This method can be applied to the rapid extraction of global photovoltaic panels. [ABSTRACT FROM AUTHOR]

Monitoring mine activities can help management track the status of mineral resource exploration and mine rehabilitation. It is crucial to the sustainable development of the mining industry and the protection of the geological environment in mining areas. To monitor the mining activities of shallow surface outcrops in the arid and semi-arid regions of northwest China, this paper proposes a remote sensing monitoring approach of mining activities based on deep learning and integrated interferometric synthetic aperture radar technique. This approach uses the DeepLabV3-ResNet model to identify and extract the spatial location of the mine patches and then uses object-oriented analysis and spatial analysis methods to optimize the mine patch boundaries. SBAS-InSAR technique is used to obtain the time-series deformation information of the mine patches and is combined with the multi-temporal optical imagery to analyze the mining activities in the study area. The proposed approach has a recognition accuracy of 95.80% for the identification and extraction of mine patches, with an F1-score of 0.727 at the pixel level, and the average area similarity for all patches is 0.78 at the object-oriented level. The proposed approach possesses the capability to analyze mining activities, indicating promising prospects for engineering applications. It provides a reference for monitoring mining activities using multisource satellite remote sensing. [ABSTRACT FROM AUTHOR]

The evaluation of satellite soil moisture is a big challenge owing to the large spatial mismatch between pixel-based satellite soil moisture products and point-based in situ measurements. Upscaling in situ measurements to obtain the "true value" of soil moisture content at the satellite grid/footprint scale can make up for the scale difference and improve the validation. Many existing upscaling methods have strict requirements regarding the spatial distribution and quantity of soil moisture sensors. However, in reality, soil-moisture-monitoring networks are commonly sparse with low sensor density, which increases the difficulty of obtaining accurate upscaled soil moisture data and limits the validation of satellite products. For this reason, this paper proposes a scheme to upscale in situ measurements using five machine learning methods along with Landsat 8 datasets and DEM data to validate the accuracy of a SMAP-enhanced passive soil moisture product for a sparse network on the Qinghai–Tibet Plateau. The proposed scheme realizes the upscaling of in situ soil moisture data to the pixel scale (30 m × 30 m) and then to the coarse grid scale (9 km × 9 km) by using multi-source remote sensing data as the bridge of scale conversion. The long-time SMAP SM products since April 2015 on the Qinghai–Tibet Plateau were validated based on upscaled soil moisture data. The results show that (1) random forest regression performs the best, and the upscaled soil moisture data reflect the region-average soil moisture conditions that can be used for evaluating SMAP data; (2) the SMAP product meets its scientific measurement requirements; and (3) the SMAP product generally underestimates the soil moisture in the study area. [ABSTRACT FROM AUTHOR]

The analysis of marine environmental parameters plays a significant role in various aspects, including sea surface target detection, the monitoring of the marine ecological environment, marine meteorology and disaster forecasting, and the monitoring of internal waves in the ocean. In particular, for sea surface target detection, the accurate and high-resolution input of marine environmental parameters is crucial for multi-scale sea surface modeling and the prediction of sea clutter characteristics. In this paper, based on the low-resolution wind speed, significant wave height, and wave period data provided by ECMWF for the surrounding seas of China (specified latitude and longitude range), a deep learning model based on a residual structure is proposed. By introducing an attention module, the model effectively addresses the poor modeling performance of traditional methods like nearest neighbor interpolation and linear interpolation at the edge positions in the image. Experimental results demonstrate that with the proposed approach, when the spatial resolution of wind speed increases from 0.5° to 0.25°, the results achieve a mean square error (MSE) of 0.713, a peak signal-to-noise ratio (PSNR) of 49.598, and a structural similarity index measure (SSIM) of 0.981. When the spatial resolution of the significant wave height increases from 1° to 0.5°, the results achieve a MSE of 1.319, a PSNR of 46.928, and an SSIM of 0.957. When the spatial resolution of the wave period increases from 1° to 0.5°, the results achieve a MSE of 2.299, a PSNR of 44.515, and an SSIM of 0.940. The proposed method can generate high-resolution marine environmental parameter data for the surrounding seas of China at any given moment, providing data support for subsequent sea surface modeling and for the prediction of sea clutter characteristics. [ABSTRACT FROM AUTHOR]

The net primary productivity (NPP) of vegetation is an important indicator reflecting the vegetation dynamics and carbon sequestration capacity in a region. In recent years, China has implemented policies to carry out ecological protection. To understand the changes in the distribution of vegetation NPP in China and the influence of climate factors, the Carnegie–Ames–Stanford approach (CASA) model was used to estimate the NPP from 2001 to 2020. In this paper, several sets of measurement datasets and products were collected to evaluate the effectiveness of the model and suggestions were provided for the modification of the CASA model based on the evaluation results. In addition to the correlation analysis, this paper presents a statistical method for analyzing the quantitative effects in individual climatic factors on NPP changes in large regions. The comparison found that the model has a better estimation effect on grassland and needleleaf forest. The estimation error for the evergreen needleleaf forest (ENF) and deciduous broadleaf forest (DBF) decreases with the warming of the climatic zone, while the evergreen broadleaf forest (EBF) and deciduous needleleaf forest (DNF) do the opposite. The changes in total CASA NPP were consistent with the trends of other products, showing a dynamic increasing trend. In terms of the degree of correlation between the NPP changes and climatic factors, the NPP changes were significantly correlated with temperature in about 10.39% of the vegetation cover area and with precipitation in about 26.92% of the vegetation cover area. It was found that the NPP variation had a negative response to the temperature variation in Inner Mongolia grasslands, while it had a positive but small effect (±10 g C) in the Qinghai–Tibet Plateau grasslands. Precipitation had a facilitative effect on the grassland NPP variation, while an increase in the annual precipitation of more than 200 mm had an inhibitory effect in arid and semi-arid regions. This study can provide data and methodological reference for the ecological assessment of large-scale regional and climate anomalous environments. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

Thermodynamic and liquid water profiles can be retrieved by a ground-based microwave radiometer (MWR) in nearly all weather conditions, which is useful for detecting mesoscale phenomena. This paper reviews the advances in remote sensing of atmospheric profiles and cloud properties by MWR in central China. Comparative studies indicate that MWR retrieval accuracy is different under various skies, especially those that decay under precipitation. The off-zenith method is proven to be capable of reducing the impact of precipitation and snow on MWR retrieval accuracy. Application studies demonstrate that MWR retrievals are helpful for early warning of rainstorms, hailstorms, and thunderstorms. Moreover, MWR retrievals provide a way to study cloud properties. The temporal variations of cloud occurrence frequency (COF) and liquid water path (LWP) are different for low, middle, and high clouds, and the vertical distribution of COF is also different in autumn and other seasons. Note that MWR can infer valid retrievals over the eastern Tibetan Plateau due to the weak precipitation over there. Also, cloud properties over the eastern Tibetan Plateau present differences from those over central China, and this is related to the different characteristics of atmospheric water vapor between these two regions. To bring more benefits for mechanism study and early warning of severe weather and numerical weather prediction, the decayed accuracy of MWR zenith retrievals under precipitation should be resolved. And combining MWR with other instruments is necessary for MWR application in detecting multi-layer clouds and ice clouds. [ABSTRACT FROM AUTHOR]

This study investigates the application of hyperspectral image space–spectral fusion technology in lithologic classification, using data from China's GF-5 and Europe's Sentinel-2A. The research focuses on the southern region of Tuanjie Peak in the Western Kunlun Range, comparing five space–spectral fusion methods: GSA, SFIM, CNMF, HySure, and NonRegSRNet. To comprehensively evaluate the effectiveness and applicability of these fusion methods, the study conducts a comprehensive assessment from three aspects: evaluation of fusion effects, lithologic classification experiments, and field validation. In the evaluation of fusion effects, the study uses an index analysis and comparison of spectral curves before and after fusion, concluding that the GSA fusion method performs the best. For lithologic classification, the Random Forest (RF) classification method is used, training with both area and point samples. The classification results from area sample training show significantly higher overall accuracy compared to point samples, aligning well with 1:50,000 scale geological maps. In field validation, the study employs on-site verification combined with microscopic identification and comparison of images with actual spectral fusion, finding that the classification results for the five lithologies are essentially consistent with field validation results. The "GSA+RF" method combination established in this paper, based on data from GF-5 and Sentinel-2A satellites, can provide technical support for lithological classification in similar high-altitude regions. [ABSTRACT FROM AUTHOR]

In this paper, multi-source observation, such as aircraft, ground-based remote sensing, and satellite-retrieved data, has been utilized to compare and analyze the vertical characteristics of aerosol optical properties and the planetary boundary layer height (HPBL) over the North China Plain (NCP) region during May–June 2016. Aircraft observations show the vertical profiles of aerosol absorption coefficients (σabs), scattering coefficients (σsca), and extinction coefficients (σext) gradually decrease with altitude, with their maximum values near HPBL. The vertical profiles of σext depended most on the vertical distribution of measured σsca, indicating a significant contribution of scattering aerosols. In addition, the prominent characteristic of the inverse relationship between σext and moisture profile could serve as a reference for predicting air quality in the NCP region. The lower layer pollution during the field experiment was likely caused by the accumulation of fine-mode aerosols, characterized by the vertical distribution of the Ångström exponent and the Aerosol Robotic Network (AERONET) products. Typically, HPBL derived from aircraft and surface Micro Pulse Lidar (MPL) was approximate, while the predicted HPBL by meteorological data indicates an underestimation of ~192 m. Aerosol optical depth (AOD) calculated from aircraft and ground-based remote sensing (such as MPL and AERONET) experienced a strong correlation, and both of them exhibited a similar tendency. However, the AOD retrieved from satellites was significantly larger than that from aircraft and ground-based remote sensing. Overall, the inversion algorithm, cloud identification algorithm, representativeness of the space, and time of the observation may lead to an overestimation or underestimation of AOD under certain circumstances. This study may serve as a re-evaluation of AOD retrieved from multi-source observations and provide a reference to uncover the actual atmospheric environment in the NCP regions. [ABSTRACT FROM AUTHOR]

Globally, forest ecosystems, especially subtropical forests, play a central role in biogeochemical cycles and climate regulation, demonstrating their irreplaceable function. The subtropical region of China, characterized by its unique forest ecosystem, complex terrain, climate heterogeneity, diverse vegetation types, and frequent human activities, underscores the importance of the in-depth study of its net primary productivity (NPP). This paper employs the eddy covariance–light use efficiency (EC-LUE) model to quantitatively estimate the gross primary productivity (GPP) of this region from 2001 to 2018, followed by an estimation of the actual net primary productivity (ANPP) using the carbon use efficiency (CUE). The results showed that over these 18 years, the annual average ANPP was 677.17 gC m−2 a−1, exhibiting an overall increasing trend, particularly in mountainous areas, reserves, and the cultivated lands of the northeastern plains, whereas a significant decrease was observed around the urban agglomerations on the southeast coast. Furthermore, the Thornthwaite memorial model was applied to calculate the potential net primary productivity (PNPP), and diverse scenarios were set to quantitatively evaluate the impact of climate change and human activities on the vegetation productivity in the study area. It was found that in areas where the ANPP increased, both human activities and climate change jointly influenced ANPP dynamics; in areas with a decreased ANPP, the impact of human activities was particularly significant. Additionally, the heterogeneous distribution of ANPP across different altitudinal gradients and the driving effects of various climatic factors were analyzed. Finally, a partial correlation analysis was used to examine the relationships between the temperature, precipitation, and ANPP. This study indicated that temperature and precipitation have a substantial impact on the growth and distribution of vegetation in the region, yet the extent of this influence shows considerable variation among different areas. This provides a robust scientific basis for further research and understanding of the carbon dynamics of subtropical forest ecosystems and their role in the global carbon cycle. [ABSTRACT FROM AUTHOR]

Mountainous terrains are typical over southeast China, with complex and diverse topography, large terrain undulations, rich geographic features, and meteorological variations. Previous studies show that ERA5 meteorological variables are generally accurate with respect to large plains or urban agglomerations, while their applicability to mountainous areas remains inconclusive. In this paper, using high-precision measurements probed by ground-based remote sensing instruments in May–July 2023 at a typical mountainous Shanghuang site in southeast China, the vertical accuracy of the ERA5 reanalysis datasets were comparatively evaluated. Our findings depict that the horizontal wind speeds of the ERA5 reanalysis data show a good performance compared to the Doppler lidar observations. In quantitative terms, ERA5 horizontal wind speeds are about 8% higher than the observed values below a height of 400 m, while above 400 m, an increasing negative bias is observed along as altitude increases. Differing from the horizontal wind speeds, there is a large discrepancy in the vertical wind speeds between the ERA5 and the observations, with a deviation of −150% to 40%. In terms of the thermal variables, the temperature extracted from ERA5 are consistent with the measurements in the low troposphere. Nevertheless, large systematic errors occur at 2000–3000 m, and the overall presentation shows that the errors gradually increase with the increase in altitude. Concerning the relative humidity, the general trend in ERA5 is similar to that observed by the microwave radiometer, but the relative errors from 500 to 2500 m range from 40% to 100%. This study also reveals that ERA5 is poorly representative and requires further improvements during extreme weather events such as rainstorms and typhoons. In particular, the horizontal wind speeds at the middle and lower levels deviate strongly from the observations. Given the importance of atmospheric thermodynamic stratifications in terms of both environmental and climatic issues, the results expand the application of the ERA5 reanalysis datasets in the mountainous areas of southeast China. More importantly, it provides credible reference data for the meteorological predictions and climate modelings in the southeast China mountainous region. [ABSTRACT FROM AUTHOR]

Forest stock volume is the main factor to evaluate forest carbon sink level. At present, the combination of multi-source remote sensing and non-parametric models has been widely used in FSV estimation. However, the biodiversity of natural forests is complex, and the response of the spatial information of remote sensing images to FSV is significantly reduced, which seriously affects the accuracy of FSV estimation. To address this challenge, this paper takes China's Baishanzu Forest Park with representative characteristics of natural forests as the research object, integrates the forest survey data, SRTM data, and Landsat 8 images of Baishanzu Forest Park, constructs a time series dataset based on survey time, and establishes an FSV estimation model based on the CNN-LSTM-Attention algorithm. The model uses the convolutional neural network to extract the spatial features of remote sensing images, uses the LSTM to capture the time-varying characteristics of FSV, captures the feature variables with a high response to FSV through the attention mechanism, and finally completes the prediction of FSV. The experimental results show that some features (e.g., texture, elevation, etc.) of the dataset based on multi-source data feature variables are more effective in FSV estimation than spectral features. Compared with the existing models such as MLR and RF, the proposed model achieved higher accuracy in the study area (R2 = 0.8463, rMSE = 26.73 m3/ha, MAE = 16.47 m3/ha). [ABSTRACT FROM AUTHOR]

Ponds constitute a pivotal component of aquatic ecosystems. The aquatic ecosystem of the Huai River Basin (HRB) in China was once damaged by severe pollution, and numerous ponds in the basin have not been secured. In this paper, Shenqiu County, a typical county in HRB with many ponds, is selected. Based on high-resolution images with ALOS in 2010, GF-2 in 2016, and GF-1 in 2022, we employed discriminant analysis (DA), classification and regression tree, support vector machine, and random forest to extract the ponds based on object-oriented and further analyzed the spatial-temporal variations of the ponds in this county. The results of the DA in these three years exhibited a higher kappa coefficient (>0.7), and overall accuracy (>75%), signifying superior performance when compared to the other three methods. There were 4625, 5315, and 4748 ponds in 2010, 2016, and 2022, with a total area of 12.87, 11.99, and 9.37 km2, respectively. The number of ponds had a trend of rising in the initial period (2010–2016) and falling later (2016–2022), while the total area revealed a continuous decline. Meanwhile, these ponds showed a clustering phenomenon with three main clustering areas, and the scope of the clustering areas also changed to a certain extent from 2010 to 2022. Our study offers valuable methodological support for the ecological monitoring and management of water environments in regions characterized by a dense concentration of ponds. The crucial data related to ponds in this study will help inform both environmental and social development initiatives within the area. [ABSTRACT FROM AUTHOR]

It is normally difficult to identify the ground deformation of potential landslides in highly vegetation-covered areas in terms of field investigation or remote sensing interpretation. In order to explore a methodology to effectively identify potential landslides in highly vegetation-covered areas, this paper established an integrated identification method, including sliding prone area identification based on regional geological environment analysis, target area identification of potential landslides in terms of comprehensive remote sensing methods, and landslide recognition through engineering geological survey. The Miaoyuan catchment in Quzhou City, Zhejiang Province, southeastern China, was taken as an example to validate the identification methods. Particularly, the Shangfang landslide was successfully studied in terms of comprehensive methods, such as geophysical survey, drilling, mineral and chemical composition analysis, and microstructure scanning of the sliding zone. In order to assess the landslide risk, the potential runout of the Shangfang landslide was evaluated in a quantitative simulation. This paper suggests a methodology to identify potential landslides from a large area to a specific slope covered by dense vegetation. [ABSTRACT FROM AUTHOR]

The rapid and accurate extraction of wide-area coseismic landslide locations is critical in earthquake emergencies. At present, the extraction of coseismic landslides is mainly based on post-earthquake site investigation or the interpretation of human–computer interactions based on remote sensing images. However, the identification efficiency is low, which seriously delays the earthquake emergency response. On the basis of the available multisource and multiscale remote sensing data, numerous studies have been carried out on the methods of coseismic landslide extraction, such as pixel analysis, object-oriented analysis, change detection, and machine learning. However, the effectiveness of coseismic landslide extraction was low in wide areas with complex topographic and geomorphic backgrounds. Therefore, this paper offers a comprehensive study of the factors influencing coseismic landslides and researches rapid and accurate wide-area coseismic landslide extraction methods with multisource remote sensing and geoscience technology. These techniques include digital elevation modeling (DEM) and its derived slopes and aspects. An embedded multichannel spectral–topographic feature fusion model for coseismic landslide extraction based on DeepLab V3+ is proposed, and a knowledge-enhanced deep learning information extraction method integrating geological knowledge is formed. Using the Jiuzhaigou Ms7.0 earthquake (seismic intensity VIII) in Sichuan Province, China, a comparison of landslide extraction models and strategies is carried out. The results show that the model proposed in this paper achieves the best balance in the accuracy and efficiency of wide-area extractions. Using multiple feature data of coseismic landslides, the problem of mixed pixels is solved. The rate of the misidentification of landslides as clouds, snow, buildings, and roads is significantly lower than in other methods. The identified landslide boundaries are smoother and more accurate, and the connectivity is better. Compared with other methods, ours can more accurately eliminate landslides not triggered by the Jiuzhaigou earthquake. While using the image block strategy to ensure extraction efficiency, it also improves the extraction accuracy of wide-area coseismic landslides in complex backgrounds. [ABSTRACT FROM AUTHOR]

Corn is an important food crop worldwide, and its yield is directly related to Chinese food security. Accurate remote sensing extraction of corn can realize the rational application of land resources, which is of great significance to the sustainable development of modern agriculture. In the field of large-scale crop remote sensing classification, single-period optical remote sensing images often cannot achieve high-precision classification. To improve classification accuracy, multiple time series image combinations have gradually been adopted. However, due to the influence of cloudy and rainy weather, it is often difficult to obtain complete time series optical images. Synthetic aperture radar (SAR) data are imaged by microwaves, which have strong penetrating power and are not affected by clouds. A critical way to solve this problem is to use SAR images to compensate for the lack of optical images and obtain a complete time series image in the corn-growing season. However, SAR images have limited wavelengths and cannot provide important wavelengths, such as visible light bands and near-infrared information. To solve this problem, this study took Zhaodong City, a vital corn-planting base in China, as the research area; took GF-6/GF-3 and Sentinel-1/Sentinel-2 as remote sensing data sources; designed12 classification scenarios; analyzed the best classification period and the best time series combination of corn classification; studied the influence of SAR images on the classification results of time series images; and compared the classification differences between GF-6/GF-3 and Sentinel-1/Sentinel-2. The results show that the classification accuracy of time series combinations is much higher than that of single-period images. The polarization characteristics of SAR images can improve the classification accuracy with time series images. The classification accuracy of GF series images from China is obviously higher than that of Sentinel series images. The research performed in this paper can provide a reference for agricultural classification by using remote sensing data. [ABSTRACT FROM AUTHOR]

Air-quality monitoring and forecasting are crucial for atmosphere pollution control and management. We propose an innovative data-driven framework for air quality index (AQI) prediction by integrating GNSS radio occultation (GNSS-RO) observation and weather modeling. Empowered by the state-of-the-art machine learning approach, our method can effectively predict regional AQI with a comparable accuracy much more quickly than the traditional numerical modeling and simulation approach. In a real case study using a representative region of China, our data-driven approach achieves a 2000 times speedup; meanwhile, the prediction error measured by rRMSE is only 2.4%. We investigate further the effects of different models, hyperparameters, and meteorological factors on the performance of our AQI prediction framework, and reveal that wind field and atmospheric boundary-layer height are important influencing factors of AQI. This paper showcases a direct application of GNSS-RO observation in assisting in forecasting regional AQI. From a machine learning point of view, it provides a new way to leverage the unique merits of GNSS atmospheric remote sensing technology with the help of the more traditional weather forecasting modeling approach. [ABSTRACT FROM AUTHOR]

Through the reasonable calculation of water resources, evaluating the irrigation carrying capacity of farmland under the constraints of water resources is crucial for optimizing the spatial distribution of agricultural production and ecology and rationally adjusting the scale of agricultural production. This paper proposes an optimization framework based on Type 2 fuzzy chance-constrained programming (T2FCCP) to solve the problem of regional water resources optimal allocation and evaluation of farmland irrigation carrying capacity under uncertain conditions. To illustrate the applicability of the proposed framework, this paper conducts a case study on Lancang County, Puer City, Yunnan Province. Methods, such as watershed harmony evaluation method, remote sensing data, and shared socioeconomic pathways (SSPs), are applied and integrated into the proposed optimization framework to systematically deal with uncertainties in water resource systems and agricultural systems. The results include the costs and benefits of regional water and soil resources systems, water resources optimal allocation, and crop planting structure results under different SSPs in Lancang County, Puer City. The results also show that the total cost under T2FCCP is about 5% lower than that under fuzzy chance-constrained programming (FCCP) and about 17% lower than that under chance-constrained programming (CCP). By 2025, the water resources carrying capacity of different tributaries in Lancang County, Puer City will increase, and based on the evaluation results of agricultural production irrigation carrying capacity, suggestions are given to ensure agricultural production carrying capacity. [ABSTRACT FROM AUTHOR]

Sea surface temperature (SST), a critical parameter of the global ocean–atmosphere system, is an essential element in the study and in the application of marine science. Satellite–infrared observations currently represent the only available method for continuous, large-scale observation of SST. Although passive microwave observations are not blocked by clouds, allowing for data collection in all weather conditions, this technological tool is characterized by low spatial resolution. Conversely, infrared observations offer high resolution but are susceptible to cloud obscuration. Accordingly, a technique that effectively fuses microwave and infrared satellite observations into a high-resolution SST field with global coverage close to the actual distribution is of practical significance. This paper describes fusing MODIS infrared remote sensing and AMSR-2 microwave remote sensing SST data with an optimal interpolation (OI) approach to produce a high-resolution SST data. The study chose the coastal Kuroshio region of China to establish an appropriate scale for examining the spatial structure of SST and attaining a more realistic picture of SST observations and impacts. The included discussion of the sources of error in the fusion process provides a reference for improving the accuracy of fused marine remote sensing data. The study also compared the fused SST results and the current international mainstream multi-temporal resolution of the three using the OI algorithm. We compared the fusion product with ARGO data with and without typhoon impact to explore and practice the OI in SST fusion when evaluating the accuracy of different data in the case of external disturbance being present. The research results have great significance for improving regional SST forecast accuracy while ensuring the applicability of various approaches to fusing SST data by incorporating the influence of typhoons in the offshore region of the East China Sea (ECS). Implications for the future development of SST fusion data are also included in the discussion. [ABSTRACT FROM AUTHOR]

The mining area in the Muli region, Qinghai Province, China, is an important source of water and an ecological security barrier in the Qilian Mountains region and has a very important ecological status. A series of ecological problems such as vegetation degradation and loss of biodiversity caused by mining have attracted widespread attention. In this paper, we used Landsat secondary data from 2000 to 2021 from the Muli region to obtain the spatial and temporal distribution characteristics of the vegetation in the Muli region by inversion of the fractional vegetation cover, above-ground biomass and the land surface phenology to comprehensively analyze the ecological changes in the vegetation in the Muli region. The results showed the following: (1) the above-ground biomass and cover of grassland in the Muli region showed a decreasing trend between 2000 and 2021, with a particularly pronounced decrease in grassland cover between 2009 and 2016; (2) the start of the vegetation growth cycle, i.e., the beginning of the vegetation growing season (SOG) became more advanced, the end of the vegetation growing season (EOG) was delayed, and the length of the growing cycle (LOG) became longer for most of the vegetation in the Muli region; (3) the results of this comprehensive analysis showed that the grassland in the Muli region showed dynamic changes with complex characteristics from 2000 to 2021, and anthropogenic disturbances had some influence on ecological indicators such as fractional vegetation cover and biomass. The extension of the vegetation growing season might be related to climate change. Based on the results of this paper, it is recommended to utilize biomass and fractional vegetation cover as indicators to assess the grass growth status of mining sites. This study analyzed the spatial and temporal characteristics of grasslands in the Muli area with several indicators, which will help relevant departments continue to improve and optimize ecological restoration measures. In addition, this study provides a reference for achieving comprehensive restoration of the ecological environment and ecological functions in mining areas. [ABSTRACT FROM AUTHOR]

Forests are threatened globally by deforestation. Forest restoration at the landscape scale can reduce these threats. Ground-based and remote sensing inventories are needed to assess restoration success. Fractional canopy cover estimated from forest algorithms can be used to monitor forest loss, growth, and health via remote sensing. Various studies on the fractional cover of forest have been published. However, none has yet conducted a bibliometric analysis. Bibliometrics provide a detailed examination of a topic, pointing academics to new research possibilities. To the best of the authors' knowledge, this is the first bibliometric study screening publications to assess the incidence of studies of the fractional cover of forests in Web of Science (WoS) and Scopus databases. This research analyses WoS and Scopus publications on the fractional cover of forest dating from 1984 to 2021. The current study uses the Bibliometrix R-package for citation metrics and analysis. The first paper on the fractional cover of forest was published in 1984 and annual publication numbers have risen since 2002. USA and China were the most active countries in the study of fractional cover of forests. A total of 955 documents from 69 countries with multiple languages were retrieved. Vegetation, forestry, and remote sensing were the most discussed topics. Findings suggest more studies on the fractional cover of forests algorithms should be conducted in tropical forest from developing countries. [ABSTRACT FROM AUTHOR]

Landslide susceptibility mapping based on static influence factors often exhibits issues of low accuracy and classification errors. To enhance the accuracy of susceptibility mapping, this study proposes a refined approach that integrates categorical boosting (CatBoost) with small baseline subset interferometric synthetic-aperture radar (SBAS-InSAR) results, achieving more precise and detailed susceptibility mapping. We utilized optical remote sensing images, the information value (IV) model, and fourteen influencing factors (elevation, slope, aspect, roughness, profile curvature, plane curvature, lithology, distance to faults, land use type, normalized difference vegetation index (NDVI), topographic wetness index (TWI), distance to rivers, distance to roads, and annual precipitation) to establish the IV-CatBoost landslide susceptibility mapping method. Subsequently, the Sentinel-1A ascending data from January 2021 to March 2023 were utilized to derive the deformation rates within the city of Lishui in the southern region of China. Based on the outcomes derived from IV-CatBoost and SBAS-InSAR, a discernment matrix was formulated to rectify inaccuracies in the partitioned regions, leading to the creation of a refined information value CatBoost integration (IVCI) landslide susceptibility mapping model. In the end, we utilized optical remote sensing interpretations alongside surface deformations obtained from SBAS-InSAR to cross-verify the excellence and accuracy of IVCI. Research findings indicate a distinct enhancement in susceptibility levels across 165,784 grids (149.20 km2) following the integration of SBAS-InSAR correction. The enhanced susceptibility classes and the spectral characteristics of remote sensing images closely correspond to the trends of SBAS-InSAR cumulative deformation, reflecting a high level of consistency with field-based conditions. These improved classifications effectively enhance the refinement of landslide susceptibility mapping. The refined susceptibility mapping approach proposed in this paper effectively enhances landslide prediction accuracy, providing valuable technical reference for landslide hazard prevention and control in the Lishui region. [ABSTRACT FROM AUTHOR]

Land desertification is one of the serious ecological and environmental problems facing mankind today, which threatens the survival and development of human society. China is one of the countries with the most serious land desertification problems in the world. Therefore, it is of great theoretical value and practical significance to carry out accurate identification and monitoring of land desertification and its influencing factors in ecologically fragile areas of China. This is conducive to curbing land desertification and ensuring regional ecological security. Minqin County, Gansu Province, located in northwestern China, is one of the most serious areas of land desertification, which is also one of the four sandstorm sources in China. Based on ENVINet5, this paper constructs a high-precision land desertification identification method with an accuracy of 93.71%, which analyzes the trend and reasons of land desertification in this area, provides suggestions for disaster prevention in Minqin County. and provides a reference for other similar areas to make corresponding desertification control policies. [ABSTRACT FROM AUTHOR]

Continuous evapotranspiration (ET) data with high spatial resolution are crucial for water resources management in irrigated agricultural areas in arid regions. Many global ET products are available now but with a coarse spatial resolution. Spatial-temporal fusion methods, such as the spatial and temporal adaptive reflectance fusion model (STARFM), can help to downscale coarse spatial resolution ET products. In this paper, the STARFM model is improved by incorporating the temperature vegetation dryness index (TVDI) into the data fusion process, and we propose a spatial and temporal adaptive evapotranspiration downscaling method (STAEDM). The modified method STAEDM was applied to the 1 km SSEBOP ET product to derive a downscaled 30 m ET for irrigated agricultural fields of Northwest China. The STAEDM exhibits a significant improvement compared to the original STARFM method for downscaling SSEBOP ET on Landsat-unavailable dates, with an increase in the squared correlation coefficients (r2) from 0.68 to 0.77 and a decrease in the root mean square error (RMSE) from 10.28 mm/10 d to 8.48 mm/10 d. The ET based on the STAEDM additionally preserves more spatial details than STARFM for heterogeneous agricultural fields and can better capture the ET seasonal dynamics. The STAEDM ET can better capture the temporal variation of 10-day ET during the whole crop growing season than SSEBOP. [ABSTRACT FROM AUTHOR]

The rapid and precise acquisition of the agricultural plastic greenhouse (PG) spatial distribution is essential in understanding PG usage and degradation, ensuring agricultural production, and protecting the ecological environment and human health. It is of great practical significance to realize the effective utilization of remote sensing images in the agricultural field and improve the extraction accuracy of PG remote sensing data. In this study, Landsat operational land imager (OLI) remote sensing images were used as data sources, and Shandong Province, which has the largest PG distribution in China, was selected as the study area. PGs in the study area were identified by means of contour recognition, feature set construction of the spatial structure, and machine learning. The results were as follows. (1) Through an optimal segmentation parameter approach, it was determined that the optimal segmentation scale for size, shape, and compactness should be set at 20, 0.8, and 0.5, respectively, which significantly improved PG contour recognition. (2) Among the 72 feature variables for PG spatial recognition, the number of features and classification accuracy showed a trend of first gradually increasing and then decreasing. Among them, fifteen feature variables, including the mean of bands 2 and 5; six index features (NDWI, GNDVI, SWIR1_NIR, NDVI, and PMLI); two shape features, the density and shape index; and two texture features, the contrast and standard deviation, played an important role. (3) According to the recall rate, accuracy rate, and F-value of three machine learning methods, random forest (RDF), CART decision tree (CART), and support vector machine (SVM), SVM had the best classification effect. The classification method described in this paper can accurately extract continuous plastic greenhouses through remote sensing images and provide a reference for the application of facility agriculture and non-point-source pollution control. [ABSTRACT FROM AUTHOR]

Phaeocystis globose (P. glo) are the most frequent harmful algae responsible for red tides in Qinzhou Bay, Guangxi. They pose a significant threat to the coastal marine ecosystem, making it essential to develop an efficient indicator method tailored to P. glo outbreaks. In remote sensing water quality monitoring, there is a strong correlation between P. glo and cyanobacteria, with phycocyanin (PC) serving as an indicator of cyanobacterial biomass. Consequently, existing research has predominantly focused on remote sensing monitoring of medium to high PC concentrations. However, it is still challenging to monitor low PC concentrations. This paper introduced the BP neural network (BPNN) and particle swarm optimization algorithm (PSO). It selects spectral bands and indices sensitive to PC concentrations and constructs a PC concentration retrieval model, in combination with meteorological factors, offering a comprehensive exploration of the indicative role of low PC concentrations in predicting P. glo red tide outbreaks in Qinzhou Bay. The results demonstrated that the PC concentration retrieval model, based on the backpropagation neural network optimized by the particle swarm optimization algorithm (PSO-BPNN), demonstrated better performance (MAE = 0.469, RMSE = 0.615). In Qinzhou Bay, PC concentrations were mainly concentrated around 2~5 μg/L. During the P. glo red tide event, the area with undetectable PC concentrations (PC < 0.04 μg/L) increased by 4.97 km2, with regions below 0.9 μg/L experiencing exponential growth. Considering the variations in PC concentrations along with meteorological factors, we proposed a straightforward early warning threshold for P. glo red tides: PC < 0.9 μg/L and T < 20 °C. This method, from a remote sensing perspective, analyzes the process of P. glo outbreaks, simplifies PC concentration monitoring, and provides a reasonably accurate prediction of the risk of P. glo red tide disasters. [ABSTRACT FROM AUTHOR]

Mangroves are a key type of protected coastal wetland, with a range of benefits such as protection from wave damage, sand fixation, water purification and ecological tourism. As the academic knowledge of mangroves has gradually increased, the use of remote sensing to monitor their dynamic changes in China has become a hot topic of discussion and has received attention in academic circles. Remote sensing has also provided necessary auxiliary decision-making suggestions and data support for the scientific and rational conservation, restoration and management of mangrove resources. In this paper, we used Landsat satellite series data combined with the normalized difference vegetation index (NDVI) and adaptive threshold partitioning (OTSU method) to monitor mangrove dynamics in coastal China from 1986 to 2021 based on Google Earth Engine (GEE), with three main results. (1) Based on the massive data and efficient computational capability of the GEE platform, we achieved large-scale interannual mangrove distribution extraction. The overall classification accuracy for 2019 exceeded 0.93, and the mangrove distribution extraction effect was good. (2) The total mangrove area and the mean patch size in China showed overall increasing trends, and Guangdong and Guangxi were the top two provinces in China in terms of the largest mangrove area. (3) Except for Dongzhaigang National Nature Reserve, the mangrove areas in other national mangrove reserves mainly showed increasing trends, confirming the effectiveness of the reserves. Data on the spatial structure and area trends of mangroves in China can provide scientific references for mangrove conservation and development, and serve in the further restoration of mangrove ecosystems. [ABSTRACT FROM AUTHOR]

Mountain areas in China account for 69% of the total land area; however, it is still an urgent that we grasp the special ecological structure of mountain areas and maximize the resource advantages of mountain areas under the principle of maintaining a certain ecological level. In this paper, Landsat 5, Landsat 8 and Sentinel-2A images were used as data sources to monitor and analyze land development and ecological change in Gui 'an in 2010, 2013, 2016, 2019 and 2021, so as to explore ecological maintenance mechanisms. Firstly, random forest classification based on multi-source remote sensing data was used to classify land, and the five phases of land-use change were assessed using quantitative analysis, in order to analyze the mountain region's land-use-change characteristics at different stages of development. The results show that Gui 'an has the "two-stage", rapid-development, rapid-recovery mode. Each stage includes a development-and-expansion period and a construction-and-protection period. In the construction period, ecological recovery construction will be emphasized, and the change intensity and rate of the second stage are lower than that of the first stage. Secondly, using a remote sensing ecological index, vegetation coverage, and a landscape index, an ecological evaluation model of the study area was constructed to analyze changes in the ecological environment and its protection in the process of land development. The ecological maintenance status of the five stages was quantitatively monitored using the analysis methods of difference change and coefficient of variation. The results showed that in the first stage of land development and expansion, the landscape pattern and ecological quality fluctuated greatly, and the proportion of ecological quality of an excellent grade decreased by 28.46%. However, in the second stage, the change slowed down and remained unchanged, and gradually moved to the middle and upper level. The results show that there is a close relationship between ecological maintenance and the land development mode, and new mountain towns can maintain ecological quality and achieve sustainable development through a reasonable land development mode. At the end of this paper, the factors affecting the ecological maintenance capacity of Gui 'an are discussed, providing effective reference material and development models for the development of mountainous areas. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) are platforms that have been increasingly used over the last decade to collect data for forest insect pest and disease (FIPD) monitoring. These machines provide flexibility, cost efficiency, and a high temporal and spatial resolution of remotely sensed data. The purpose of this review is to summarize recent contributions and to identify knowledge gaps in UAV remote sensing for FIPD monitoring. A systematic review was performed using the preferred reporting items for systematic reviews and meta-analysis (PRISMA) protocol. We reviewed the full text of 49 studies published between 2015 and 2021. The parameters examined were the taxonomic characteristics, the type of UAV and sensor, data collection and pre-processing, processing and analytical methods, and software used. We found that the number of papers on this topic has increased in recent years, with most being studies located in China and Europe. The main FIPDs studied were pine wilt disease (PWD) and bark beetles (BB) using UAV multirotor architectures. Among the sensor types, multispectral and red–green–blue (RGB) bands were preferred for the monitoring tasks. Regarding the analytical methods, random forest (RF) and deep learning (DL) classifiers were the most frequently applied in UAV imagery processing. This paper discusses the advantages and limitations associated with the use of UAVs and the processing methods for FIPDs, and research gaps and challenges are presented. [ABSTRACT FROM AUTHOR]

Models for bathymetry retrieval from multispectral images have not considered the errors caused by tidal fluctuation. A rigorous bathymetric model that considers the variation in tide height time series, including the tide height calculation and instantaneous tide height correction at the epoch of satellite flight into the bathymetric retrieval model, is proposed in this paper. The model was applied on Weizhou Island, located in Guangxi Province, China, and its accuracy verificated with four check lines and seven checkpoints. A scene from the Landsat 8 satellite image was used as experimental data. The reference ("true") water depth data collected by a RESON SeaBat 7125 multibeam instrument was used for comparison analysis. When satellite-derived bathymetry is compared, it is found that maximum absolute error, mean absolute error, and RMSE have decreased 54, 45, and 30% relative to that of the traditional model in the entire test field. The accuracy of the water depths retrieved by our model increased 30 and 56% when validated using four check lines and seven checkpoints, respectively. Therefore, it can be concluded that the model proposed in this paper can effectively improve the accuracy of bathymetry retrieved from Landsat 8 images. [ABSTRACT FROM AUTHOR]

The significant heterogeneity in the spatial distribution of point of interest (POI) data, the absence of human socio-economic activity information in remote sensing images (RSI), and the high cost of land use (LU) data acquisition restrict their application in PLES spatial identification. Utilizing easily accessible data for detailed spatial identification of PLES remains an urgent challenge, especially when selecting a study area that encompasses both urban built-up areas (UBUA) and non-urban built-up areas (NUBUA). To address this issue, we proposed a PLES spatial identification method that combines POI data and land cover (LC) data in this paper. The proposed method first classified spatial analysis units (SAUs) into agricultural production space (APS), ecological space (ES), and ambiguous space (AS) based on the rich surface physical information from LC data. Subsequently, the AS was further classified into living space (LS) and non-agricultural production space (NAPS) based on the rich human socioeconomic information from POI data. For the AS that contains no POI, a simple rule was established to differentiate it into LS or NAPS. The effectiveness of the method was verified by accuracy evaluation and visual comparison. Applying the method to the Jiaodong Peninsula, we identified the PLES of the Jiaodong Peninsula for 2018 and 2022, further explored their spatial distribution characteristics, and analyzed their changes. Finally, we conducted a discussion on the real-world situations and driving mechanisms of the PLES changes and proposed several policy insights. The results indicated that both the spatial distribution characteristics of PLES and PLES change in the Jiaodong Peninsula were obvious and showed significant differentiation between UBUA and NUBUA. Climatic and natural resource conditions, geographic location, macro-policies, and governmental behaviors drove the PLES changes. [ABSTRACT FROM AUTHOR]

Going beyond previous work, this paper presents a systematic literature review that explores the deployment of satellites, drones, and ground-based sensors for yield prediction in agriculture. It covers multiple aspects of the topic, including crop types, key sensor platforms, data analysis techniques, and performance in estimating yield. To this end, datasets from Scopus and Web of Science were analyzed, resulting in the full review of 269 out of 1429 retrieved publications. Our study revealed that China (93 articles, >1800 citations) and the USA (58 articles, >1600 citations) are prominent contributors in this field; while satellites were the primary remote sensing platform (62%), followed by airborne (30%) and proximal sensors (27%). Additionally, statistical methods were used in 157 articles, and model-based approaches were utilized in 60 articles, while machine learning and deep learning were employed in 142 articles and 62 articles, respectively. When comparing methods, machine learning and deep learning methods exhibited high accuracy in crop yield prediction, while other techniques also demonstrated success, contingent on the specific crop platform and method employed. The findings of this study serve as a comprehensive roadmap for researchers and farmers, enabling them to make data-driven decisions and optimize agricultural practices, paving the way towards a fully digitized yield prediction. [ABSTRACT FROM AUTHOR]