Search

The Bidirectional Reflectance Distribution Function (BRDF) is a critical spatial distribution parameter in the quantitative research of remote sensing and has a wide range of applications in radiometric correction, elemental inversion, and surface feature estimation. As a new means of BRDF modeling, UAV push-broom hyperspectral imaging is limited by the push-broom imaging method, and the multi-angle information is often difficult to obtain. In addition, the random variation of solar illumination during UAV low-altitude flight makes the irradiance between different push-broom hyperspectral rows and different airstrips inconsistent, which significantly affects the radiometric consistency of BRDF modeling and results in the difficulty of accurately portraying the three-dimensional spatial reflectance distribution in the UAV model. These problems largely impede the application of outdoor BRDF. Based on this, this paper proposes a fast multi-angle information acquisition scheme with a high-accuracy BRDF modeling method considering illumination variations, which mainly involves a lightweight system for BRDF acquisition and three improved BRDF models considering illumination corrections. We adopt multi-rectangular nested flight paths for multi-gray level targets, use multi-mode equipment to acquire spatial illumination changes and multi-angle reflectivity information in real-time, and introduce the illumination correction factor K through data coupling to improve the kernel, Hapke, and RPV models, and, overall, the accuracy of the improved model is increased by 20.83%, 11.11%, and 31.48%, respectively. The results show that our proposed method can acquire multi-angle information quickly and accurately using push-broom hyperspectral imaging, and the improved model eliminates the negative effect of illumination on BRDF modeling. This work is vital for expanding the multi-angle information acquisition pathway and high-efficiency and high-precision outdoor BRDF modeling. [ABSTRACT FROM AUTHOR]

Several deep learning and transformer models have been recommended in previous research to deal with the classification of hyperspectral images (HSIs). Among them, one of the most innovative is the bidirectional encoder representation from transformers (BERT), which applies a distance-independent approach to capture the global dependency among all pixels in a selected region. However, this model does not consider the local spatial-spectral and spectral sequential relations. In this paper, a dual-dimensional (i.e., spatial and spectral) BERT (the so-called D2BERT) is proposed, which improves the existing BERT model by capturing more global and local dependencies between sequential spectral bands regardless of distance. In the proposed model, two BERT branches work in parallel to investigate relations among pixels and spectral bands, respectively. In addition, the layer intermediate information is used for supervision during the training phase to enhance the performance. We used two widely employed datasets for our experimental analysis. The proposed D2BERT shows superior classification accuracy and computational efficiency with respect to some state-of-the-art neural networks and the previously developed BERT model for this task. [ABSTRACT FROM AUTHOR]

The fusion of hyperspectral imagery (HSI) and light detection and ranging (LiDAR) data for classification has received widespread attention and has led to significant progress in research and remote sensing applications. However, existing common CNN architectures suffer from the significant drawback of not being able to model remote sensing images globally, while transformer architectures are not able to capture local features effectively. To address these bottlenecks, this paper proposes a classification framework for multisource remote sensing image fusion. First, a spatial and spectral feature projection network is constructed based on parallel feature extraction by combining HSI and LiDAR data, which is conducive to extracting joint spatial, spectral, and elevation features from different source data. Furthermore, in order to construct local–global nonlinear feature mapping more flexibly, a network architecture coupling together multiscale convolution and a multiscale vision transformer is proposed. Moreover, a plug-and-play nonlocal feature token aggregation module is designed to adaptively adjust the domain offsets between different features, while a class token is employed to reduce the complexity of high-dimensional feature fusion. On three open-source remote sensing datasets, the performance of the proposed multisource fusion classification framework improves about 1% to 3% over other state-of-the-art algorithms. [ABSTRACT FROM AUTHOR]

With the emergence of the Smart City concept, the rapid advancement of urban three-dimensional (3D) reconstruction becomes imperative. While current developments in the field of 3D reconstruction have enabled the generation of 3D products such as Digital Surface Models (DSM), challenges persist in accurately reconstructing shadows, handling occlusions, and addressing low-texture areas in very-high-resolution remote sensing images. These challenges often lead to difficulties in calculating satisfactory disparity maps using existing stereo matching methods, thereby reducing the accuracy of 3D reconstruction. This issue is particularly pronounced in urban scenes, which contain numerous super high-rise and densely distributed buildings, resulting in large disparity values and occluded regions in stereo image pairs, and further leading to a large number of mismatched points in the obtained disparity map. In response to these challenges, this paper proposes a method to refine the disparity in urban scenes based on open-source GIS data. First, we register the GIS data with the epipolar-rectified images since there always exists unignorable geolocation errors between them. Specifically, buildings with different heights present different offsets in GIS data registering; thus, we perform multi-modal matching for each building and merge them into the final building mask. Subsequently, a two-layer optimization process is applied to the initial disparity map based on the building mask, encompassing both global and local optimization. Finally, we perform a post-correction on the building facades to obtain the final refined disparity map that can be employed for high-precision 3D reconstruction. Experimental results on SuperView-1, GaoFen-7, and GeoEye satellite images show that the proposed method has the ability to correct the occluded and mismatched areas in the initial disparity map generated by both hand-crafted and deep-learning stereo matching methods. The DSM generated by the refined disparity reduces the average height error from 2.2 m to 1.6 m, which demonstrates superior performance compared with other disparity refinement methods. Furthermore, the proposed method is able to improve the integrity of the target structure and present steeper building facades and complete roofs, which are conducive to subsequent 3D model generation. [ABSTRACT FROM AUTHOR]

Autonomous Unmanned Aerial Vehicles (UAVs) have possible applications in wildlife monitoring, disaster monitoring, and emergency Search and Rescue (SAR). Autonomous capabilities such as waypoint flight modes and obstacle avoidance, as well as their ability to survey large areas, make UAVs the prime choice for these critical applications. However, autonomous UAVs usually rely on the Global Navigation Satellite System (GNSS) for navigation and normal visibility conditions to obtain observations and data on their surrounding environment. These two parameters are often lacking due to the challenging conditions in which these critical applications can take place, limiting the range of utilisation of autonomous UAVs. This paper presents a framework enabling a UAV to autonomously navigate and detect targets in GNSS-denied and visually degraded environments. The navigation and target detection problem is formulated as an autonomous Sequential Decision Problem (SDP) with uncertainty caused by the lack of the GNSS and low visibility. The SDP is modelled as a Partially Observable Markov Decision Process (POMDP) and tested using the Adaptive Belief Tree (ABT) algorithm. The framework is tested in simulations and real life using a navigation task based on a classic SAR operation in a cluttered indoor environment with different visibility conditions. The framework is composed of a small UAV with a weight of 5 kg, a thermal camera used for target detection, and an onboard computer running all the computationally intensive tasks. The results of this study show the robustness of the proposed framework to autonomously explore and detect targets using thermal imagery under different visibility conditions. Devising UAVs that are capable of navigating in challenging environments with degraded visibility can encourage authorities and public institutions to consider the use of autonomous remote platforms to locate stranded people in disaster scenarios. [ABSTRACT FROM AUTHOR]

Image captioning is a technique that enables the automatic extraction of natural language descriptions about the contents of an image. On the one hand, information in the form of natural language can enhance accessibility by reducing the expertise required to process, analyze, and exploit remote sensing images, while on the other, it provides a direct and general form of communication. However, image captioning is usually restricted to a single sentence, which barely describes the rich semantic information that typically characterizes remote sensing (RS) images. In this paper, we aim to move one step forward by proposing a captioning system that, mimicking human behavior, adopts dialogue as a tool to explore and dig for information, leading to more detailed and comprehensive descriptions of RS scenes. The system relies on a questions–answers scheme fed by a query image and summarizes the dialogue content with ChatGPT. Experiments carried out on two benchmark remote sensing datasets confirm the potential of such an approach in the context of semantic information mining. Strengths and weaknesses are highlighted and discussed, as well as some possible future developments. [ABSTRACT FROM AUTHOR]

High dynamic range imaging (HDRI) is an essential task in remote sensing, enhancing low dynamic range (LDR) remote sensing images and benefiting downstream tasks, such as object detection and image segmentation. However, conventional frame-based HDRI methods may encounter challenges in real-world scenarios due to the limited information inherent in a single image captured by conventional cameras. In this paper, an event-based remote sensing HDR imaging framework is proposed to address this problem, denoted as ERS-HDRI, which reconstructs the remote sensing HDR image from a single-exposure LDR image and its concurrent event streams. The proposed ERS-HDRI leverages a coarse-to-fine framework, incorporating the event-based dynamic range enhancement (E-DRE) network and the gradient-enhanced HDR reconstruction (G-HDRR) network. Specifically, to efficiently achieve dynamic range fusion from different domains, the E-DRE network is designed to extract the dynamic range features from LDR frames and events and perform intra- and cross-attention operations to adaptively fuse multi-modal data. A denoise network and a dense feature fusion network are then employed for the generation of the coarse, clean HDR image. Then, the G-HDRR network, with its gradient enhancement module and multiscale fusion module, performs structure enforcement on the coarse HDR image and generates a fine informative HDR image. In addition, this work introduces a specialized hybrid imaging system and a novel, real-world event-based remote sensing HDRI dataset that contains aligned remote sensing LDR images, remote sensing HDR images, and concurrent event streams for evaluation. Comprehensive experiments have demonstrated the effectiveness of the proposed method. Specifically, it improves state-of-the-art PSNR by about 30% and the SSIM score by about 9% on the real-world dataset. [ABSTRACT FROM AUTHOR]

Research on the temporal and spatial changes of the urban heat island effect can help us better understand how urbanization, climate change, and the environment are interconnected. This study uses a spatiotemporal analysis method that couples the Emerging Hot Spot Analysis (EHSA) technique with the Mann–Kendall technique. The method is applied to determine the intensity of the heat island effect in humid subtropical climates over time and space. The data used in this research include thermal bands, red band (RED) and near-infrared band (NIR), and Landsat 7 and 8 satellites, which were selected from 2000 to 2022 for the city of Sari, an Iranian city on the Caspian Sea. Pre-processed spectral bands from the 'Google Earth Engine' database were used to estimate the land surface temperature. The land surface temperature difference between the urban environment and the outer buffer (1500 m) was modeled and simulated. The results of this paper show the accuracy and novelty of using Emerging Hotspot Analysis to evaluate the effect of vegetation cover on the urban heat island intensity. Based on the Normalized Difference Vegetation Index (NDVI), the city's land surface temperature increased by approximately 0.30 °C between 2011 and 2022 compared to 2001 to 2010. However, the intensity of the urban heat island decreased during the study period, with r = −0.42, so an average −0.031 °C/decade decrease has been experienced. The methodology can be transferred to other cities to evaluate the role of urban green spaces in reducing heat stress and to estimate the heat budget based on historical observations. [ABSTRACT FROM AUTHOR]

In the face of complex scenarios, the information insufficiency of classification tasks dominated by a single modality has led to a bottleneck in classification performance. The joint application of multimodal remote sensing data for surface observation tasks has garnered widespread attention. However, issues such as sample differences between modalities and the lack of correlation in physical features have limited the performance of classification tasks. Establishing effective interaction between multimodal data has become another significant challenge. To fully integrate heterogeneous information from multiple modalities and enhance classification performance, this paper proposes a dual-branch cross-Transformer feature fusion network aimed at joint land cover classification of hyperspectral imagery (HSI) and Light Detection and Ranging (LiDAR) data. The core idea is to leverage the potential of convolutional operators to represent spatial features, combined with the advantages of the Transformer architecture in learning remote dependencies. The framework employs an improved self-attention mechanism to aggregate features within each modality, highlighting the spectral information of HSI and the spatial (elevation) information of LiDAR. The feature fusion module based on cross-attention integrates deep features from two modalities, achieving complementary information through cross-modal attention. The classification task is performed using jointly obtained spectral and spatial features. Experiments were conducted on three multi-source remote sensing classification datasets, demonstrating the effectiveness of the proposed model compared to existing methods. [ABSTRACT FROM AUTHOR]

In the field of remote sensing technology, the semantic segmentation of remote sensing images carries substantial importance. The creation of high-quality models for this task calls for an extensive collection of image data. However, the manual annotation of these images can be both time-consuming and labor-intensive. This has catalyzed the advent of semi-supervised semantic segmentation methodologies. Yet, the complexities inherent within the foreground categories of these remote sensing images present challenges in preserving prediction consistency. Moreover, remote sensing images possess more complex features, and different categories are confused within the feature space, making optimization based on the feature space challenging. To enhance model consistency and to optimize feature-based class categorization, this paper introduces a novel semi-supervised semantic segmentation framework based on Mean Teacher (MT). Unlike the conventional Mean Teacher that only introduces perturbations at the image level, we incorporate perturbations at the feature level. Simultaneously, to maintain consistency after feature perturbation, we employ contrastive learning for feature-level learning. In response to the complex feature space of remote sensing images, we utilize entropy threshold to assist contrastive learning, selecting feature key-values more precisely, thereby enhancing the accuracy of segmentation. Extensive experimental results on the ISPRS Potsdam dataset and the challenging iSAID dataset substantiate the superior performance of our proposed methodology. [ABSTRACT FROM AUTHOR]

This paper introduces a new bidirectional integration approach that combines fiber sensor/free space optics (FSO) communication using an intensity and wavelength division multiplexer (IWDM) techniques-based long-distance fiber Bragg grating (FBG) sensor strain-sensing system. By implementing coarse wavelength division multiplexing (CWDM), the system achieves the simultaneous transmission of optical communication and fiber optical sensor (FOS) sensing signals, resulting in a highly capable, flexible, and cost-effective solution. The proposed FSO transmission technique addresses complex fiber cable installation concerns with topographical limitations. This bidirectional structure ensures the reliability and stability of the long-distance FBG sensor system, supported by extensive research and experimentation. A hybrid stacked gated recurrent units and long short-term memory (SGRU-LSTM) model is proposed to enhance strain measurement accuracy by predicting and measuring the central wavelength of overlapped strain-sensing FBG sensor signals. The results demonstrate the superiority of the proposed model in peak wavelength detection accuracy. The primary benefit of integrating communication and sensing is the significant reduction in construction costs by eliminating the requirement for two individual fiber optic systems, as the integration allows for a single system to fulfill both functions, resulting in more efficient and cost-effective implementation. Overall, this paper contributes to advancing long-distance FBG sensor systems by integrating fiber sensor/FSO communication and deep learning techniques, improving transmission distance, multiplexing capacity, measurement accuracy, system survivability, and cost-effectiveness. [ABSTRACT FROM AUTHOR]

As rainfall exhibits high spatiotemporal variability, accurate and real-time rainfall monitoring is vitally important in fields such as hydrometeorological research, agriculture and disaster prevention and control. Nevertheless, the current dedicated rain sensors cannot fulfill the requirement for comprehensive precipitation observation, owing to their respective limitations. Within the last two decades, the utilization of commercial microwave links (CMLs) for rainfall estimation, as an opportunistic sensing method, has generated considerable attention. Relying on CML networks deployed and maintained by mobile network operators can provide near-surface precipitation information over large areas at a low cost. Although scholars have developed several algorithms for obtaining rainfall estimates from CML data, the rainfall estimation technique based on CMLs remains challenging due to the complex effect in the microwave radiation transmission process. In this paper, we provide a comprehensive review of the technical principles, developments and workflows for this technology, alongside its application in environmental monitoring and hydrological modeling. Furthermore, this paper outlines the current challenges and future research directions, which will hopefully draw the attention of researchers and provide valuable guidance. [ABSTRACT FROM AUTHOR]

In this paper, we investigate deep-learning-based image inpainting techniques for emergency remote sensing mapping. Image inpainting can generate fabricated targets to conceal real-world private structures and ensure informational privacy. However, casual inpainting outputs may seem incongruous within original contexts. In addition, the residuals of original targets may persist in the hiding results. A Residual Attention Target-Hiding (RATH) model has been proposed to address these limitations for remote sensing target hiding. The RATH model introduces the residual attention mechanism to replace gated convolutions, thereby reducing parameters, mitigating gradient issues, and learning the distribution of targets present in the original images. Furthermore, this paper modifies the fusion module in the contextual attention layer to enlarge the fusion patch size. We extend the edge-guided function to preserve the original target information and confound viewers. Ablation studies on an open dataset proved the efficiency of RATH for image inpainting and target hiding. RATH had the highest similarity, with a 90.44 % structural similarity index metric (SSIM), for edge-guided target hiding. The training parameters had 1 M fewer values than gated convolution (Gated Conv). Finally, we present two automated target-hiding techniques that integrate semantic segmentation with direct target hiding or edge-guided synthesis for remote sensing mapping applications. [ABSTRACT FROM AUTHOR]

Lanzhou City is located in the semi-arid region of northwest China, which experiences serious desertification. Moreover, the high intensity of land development, with the accelerated industrialization and urbanization, causes increasingly aggravated conflict between humans and the environment. Exploring the response of the ecological environment quality to the natural environment and anthropogenic activities is important to protect the sustainable development of urban economic construction and the environment. Based on the Google Earth Engine (GEE) platform, this paper constructed a modified Remote Sensing Ecological Index (MRSEI) model which could reflect the ecological environment quality by integrating the desertification index (DI) into the Remote Sensing Ecological index (RSEI) model. This paper explores the spatiotemporal variation in the environmental quality from 2000 to 2020 in Lanzhou, China, and analyzes the natural and anthropogenic factors affecting the environment quality in terms of temperature, precipitation, gross domestic product (GDP), land use, night lighting, and population. The results showed that the mean value of MRSEI ranged from 0.254 to 0.400. The area undergoing fast growth in ecological quality was in the northwestern part of Lanzhou, and the area of decrease was in the central part. Various factors have different degrees of influence on the ecosystem, with temperature, precipitation, and land use having a greater impact, and GDP and population having a limited impact. Precipitation and temperature showed a strong impact when interacting with other factors, demonstrating that precipitation and temperature were also key factors affecting MRSEI. Overall, climate change and the implementation of ecological restoration projects have led to an improvement in the quality of the ecological environment in Lanzhou. This study provides a reference for understanding the spatiotemporal changes in the ecological environment in semi-arid Lanzhou and is conducive to formulating proper protection strategies. [ABSTRACT FROM AUTHOR]

Data processing of low-altitude remote sensing visible images from UAVs is one of the hot research topics in precision agriculture aviation. In order to solve the problems of large model size with slow detection speed that lead to the inability to process images in real time, this paper proposes a lightweight target detector CURI-YOLOv7 based on YOLOv7tiny which is suitable for individual citrus tree detection from UAV remote sensing imagery. This paper augmented the dataset with morphological changes and Mosica with Mixup. A backbone based on depthwise separable convolution and the MobileOne-block module was designed to replace the backbone of YOLOv7tiny. SPPF (spatial pyramid pooling fast) was used to replace the original spatial pyramid pooling structure. Additionally, we redesigned the neck by adding GSConv and depth-separable convolution and deleted its input layer from the backbone with a size of (80, 80) and its output layer from the head with a size of (80, 80). A new ELAN structure was designed, and the redundant convolutional layers were deleted. The experimental results show that the GFLOPs = 1.976, the parameters = 1.018 M, the weights = 3.98 MB, and the mAP = 90.34% for CURI-YOLOv7 in the UAV remote sensing imagery of the citrus trees dataset. The detection speed of a single image is 128.83 on computer and 27.01 on embedded devices. Therefore, the CURI-YOLOv7 model can basically achieve the function of individual tree detection in UAV remote sensing imagery on embedded devices. This forms a foundation for the subsequent UAV real-time identification of the citrus tree with its geographic coordinates positioning, which is conducive to the study of precise agricultural management of citrus orchards. [ABSTRACT FROM AUTHOR]

Predicting particulate matter with a diameter of 10 μm (PM10) is crucial due to its impact on human health and the environment. Today, aerosol optical depth (AOD) offers high resolution and wide coverage, making it a viable way to estimate PM concentrations. Recent years have also witnessed in-creasing promise in refining air quality predictions via deep neural network (DNN) models, out-performing other techniques. However, learning the weights and biases of the DNN is a task classified as an NP-hard problem. Current approaches such as gradient-based methods exhibit significant limitations, such as the risk of becoming ensnared in local minimal within multi-objective loss functions, substantial computational requirements, and the requirement for continuous objective functions. To tackle these challenges, this paper introduces a novel approach that combines the binary gray wolf optimizer (BGWO) with DNN to improve the optimization of models for air pollution prediction. The BGWO algorithm, inspired by the behavior of gray wolves, is used to optimize both the weight and bias of the DNN. In the proposed BGWO, a novel sigmoid function is proposed as a transfer function to adjust the position of the wolves. This study gathers meteorological data, topographic information, PM10 pollution data, and satellite images. Data preparation includes tasks such as noise removal and handling missing data. The proposed approach is evaluated through cross-validation using metrics such as correlation rate, R square, root-mean-square error (RMSE), and accuracy. The effectiveness of the BGWO-DNN framework is compared to seven other machine learning (ML) models. The experimental evaluation of the BGWO-DNN method using air pollution data shows its superior performance compared with traditional ML techniques. The BGWO-DNN, CapSA-DNN, and BBO-DNN models achieved the lowest RMSE values of 16.28, 19.26, and 20.74, respectively. Conversely, the SVM-Linear and GBM algorithms displayed the highest levels of error, yielding RMSE values of 36.82 and 32.50, respectively. The BGWO-DNN algorithm secured the highest R2 (88.21%) and accuracy (93.17%) values, signifying its superior performance compared with other models. Additionally, the correlation between predicted and actual values shows that the proposed model surpasses the performance of other ML techniques. This paper also observes relatively stable pollution levels during spring and summer, contrasting with significant fluctuations during autumn and winter. [ABSTRACT FROM AUTHOR]

In recent years, there has been a growing interest in remote sensing image–text cross-modal retrieval due to the rapid development of space information technology and the significant increase in the volume of remote sensing image data. Remote sensing images have unique characteristics that make the cross-modal retrieval task challenging. Firstly, the semantics of remote sensing images are fine-grained, meaning they can be divided into multiple basic units of semantic expression. Different combinations of basic units of semantic expression can generate diverse text descriptions. Additionally, these images exhibit variations in resolution, color, and perspective. To address these challenges, this paper proposes a multi-task guided fusion encoder (MTGFE) based on the multimodal fusion encoding method, the progressiveness of which has been proved in the cross-modal retrieval of natural images. By jointly training the model with three tasks: image–text matching (ITM), masked language modeling (MLM), and the newly introduced multi-view joint representations contrast (MVJRC), we enhance its capability to capture fine-grained correlations between remote sensing images and texts. Specifically, the MVJRC task is designed to improve the model's consistency in joint representation expression and fine-grained correlation, particularly for remote sensing images with significant differences in resolution, color, and angle. Furthermore, to address the computational complexity associated with large-scale fusion models and improve retrieval efficiency, this paper proposes a retrieval filtering method, which achieves higher retrieval efficiency while minimizing accuracy loss. Extensive experiments were conducted on four public datasets to evaluate the proposed method, and the results validate its effectiveness. [ABSTRACT FROM AUTHOR]

Object detection in remote sensing images (RSIs) has become crucial in recent years. However, researchers often prioritize detecting small objects, neglecting medium- to large-sized ones. Moreover, detecting objects hidden in shadows is challenging. Additionally, most detectors have extensive parameters, leading to higher hardware costs. To address these issues, this paper proposes a multi-scale and high-precision lightweight object detector named MHLDet. Firstly, we integrated the SimAM attention mechanism into the backbone and constructed a new feature-extraction module called validity-neat feature extract (VNFE). This module captures more feature information while simultaneously reducing the number of parameters. Secondly, we propose an improved spatial pyramid pooling model, named SPPE, to integrate multi-scale feature information better, enhancing the model to detect multi-scale objects. Finally, this paper introduces the convolution aggregation crosslayer (CACL) into the network. This module can reduce the size of the feature map and enhance the ability to fuse context information, thereby obtaining a feature map with more semantic information. We performed evaluation experiments on both the SIMD dataset and the UCAS-AOD dataset. Compared to other methods, our approach achieved the highest detection accuracy. Furthermore, it reduced the number of parameters by 12.7% compared to YOLOv7-Tiny. The experimental results illustrated that our proposed method is more lightweight and exhibits superior detection accuracy compared to other lightweight models. [ABSTRACT FROM AUTHOR]

The lack of high-resolution training sets for intelligent landslide recognition using high-resolution remote sensing images is a major challenge. To address this issue, this paper proposes a method for reconstructing low-resolution landslide remote sensing images based on a Super-Resolution Generative Adversarial Network (SRGAN) to fully utilize low-resolution images in the process of constructing high-resolution landslide training sets. First, this paper introduces a novel Enhanced Depth Residual Block called EDCA, which delivers stable performance compared to other models while only slightly increasing model parameters. Secondly, it incorporates coordinated attention and redesigns the feature extraction module of the network, thus boosting the learning ability of image features and the expression of high-frequency information. Finally, a residual stacking-based landslide remote sensing image reconstruction strategy was proposed using EDCA residual blocks. This strategy employs residual learning to enhance the reconstruction performance of landslide images and introduces LPIPS for evaluating the test images. The experiment was conducted using landslide data collected by drones in the field. The results show that compared with traditional interpolation algorithms and classic deep learning reconstruction algorithms, this approach performs better in terms of SSIM, PSNR, and LPIPS. Moreover, the network can effectively handle complex features in landslide scenes, which is beneficial for subsequent target recognition and disaster monitoring. [ABSTRACT FROM AUTHOR]

Accurate building extraction for high-resolution remote sensing images is critical for topographic mapping, urban planning, and many other applications. Its main task is to label each pixel point as a building or non-building. Although deep-learning-based algorithms have significantly enhanced the accuracy of building extraction, fully automated methods for building extraction are limited by the requirement for a large number of annotated samples, resulting in a limited generalization ability, easy misclassification in complex remote sensing images, and higher costs due to the need for a large number of annotated samples. To address these challenges, this paper proposes an improved interactive building extraction model, ARE-Net, which adopts a deep interactive segmentation approach. In this paper, we present several key contributions. Firstly, an adaptive-radius encoding (ARE) module was designed to optimize the interaction features of clicks based on the varying shapes and distributions of buildings to provide maximum a priori information for building extraction. Secondly, a two-stage training strategy was proposed to enhance the convergence speed and efficiency of the segmentation process. Finally, some comprehensive experiments using two models of different sizes (HRNet18s+OCR and HRNet32+OCR) were conducted on the Inria and WHU building datasets. The results showed significant improvements over the current state-of-the-art method in terms of N o C 90 . The proposed method achieved performance enhancements of 7.98% and 13.03% with HRNet18s+OCR and 7.34% and 15.49% with HRNet32+OCR on the WHU and Inria datasets, respectively. Furthermore, the experiments demonstrated that the proposed ARE-Net method significantly reduced the annotation costs while improving the convergence speed and generalization performance. [ABSTRACT FROM AUTHOR]

The airborne hyperspectral remote sensing systems (AHRSSs) acquire images with high spectral resolution, high spatial resolution, and high temporal dimension. While the AHRSS captures more detailed information from the terrain objects, the computational complexity of data processing is greatly increased. As an important application technology in the hyperspectral domain, anomaly detection (AD) processing must be real-time and high-precision in many cases, such as post-disaster rescue, military battlefield search, and natural disaster detection. In this paper, the real-time AD technology for the push-broom AHRSS is studied, the mathematical model is established, and a novel implementation framework is proposed. Firstly, the optimized kernel minimum noise fraction (OP-KMNF) transformation is employed to extract informative and discriminative features between the background and anomalies. Secondly, the Nyström method is introduced to reduce the computational complexity of OP-KMNF transformation by decomposing and extrapolating the sub-kernel matrix to estimate the eigenvector of the entire kernel matrix. Thirdly, the extracted features are transferred to hard disks for data storage. Then, taking the extracted features as input data, the background separation model-based CEM anomaly detector (BSM-CEMAD) is imported to detect anomalies. Finally, graphics processing unit (GPU) parallel computing is utilized in the Nyström-based OP-KMNF (NOP-KMNF) transformation and the BSM-CEMAD to improve the execution efficiency, and the real-time AD for the push-broom AHRSS could be realized. To test the feasibility of the implementation framework proposed in this paper, the experiment is carried out with the Airborne Multi-Modular Imaging Spectrometer (AMMIS) developed by the Shanghai Institute of Technical Physics as the data acquisition platform. The experimental results show that the proposed method outperforms many other state-of-the-art AD methods in anomalies detection and background suppression. Moreover, under the condition that the downlink data could retain most of the hyperspectral data information, the proposed method achieves real-time detection of pixel-level anomalies, with the initial delay not exceeding 1 s, the false alarm rate (FAR) less than 5%, and the true positive rate (TPR) close to 98%. [ABSTRACT FROM AUTHOR]

The main task of remote sensing image target detection is to locate and classify the targets of interest in remote sensing images, which plays an important role in intelligence investigation, disaster relief, industrial application, and other fields. However, the targets in the remote sensing image scene have special problems such as special perspective, scale diversity, multi-direction, small targets, and high background complexity. In this paper, the YOLOv5 target detection algorithm is improved according to the above characteristics. Aiming at the problem of large target size span in remote sensing images, this paper uses K-Means++ clustering algorithm to eliminate the problem in which the original clustering algorithm is sensitive to initial position, noise, and outliers, and optimizes the instability caused by K-Means clustering to obtain preset anchor frames. Aiming at the redundancy of background information around the location of remote sensing image targets, the large number of small targets, and the denseness of targets, a double IoU-aware decoupling head (DDH) is introduced at the output end to replace the coupled yolo head, which eliminates the interference caused by different task sharing parameters. At the same time, the correlation between positioning accuracy and classification accuracy is improved by the IoU-aware method. The attention mechanism is introduced into the backbone network to optimize the detection and small target detection in complex backgrounds. The mAP of the improved YOLOv5 algorithm is improved by 9%, and the detection effect of small targets and dense targets is significantly improved. At the same time, the paper has achieved good results through the verification of the DIOR remote sensing data set and has also achieved good performance advantages in comparison with other models. [ABSTRACT FROM AUTHOR]

Deep learning has gained widespread interest in the task of building semantic segmentation modelling using remote sensing images; however, neural network models require a large number of training samples to achieve better classification performance, and the models are more sensitive to error patches in the training samples. The training samples obtained in semi-supervised classification methods need less reliable weakly labelled samples, but current semi-supervised classification research puts the generated weak samples directly into the model for applications, with less consideration of the impact of the accuracy and quality improvement of the weak samples on the subsequent model classification. Therefore, to address the problem of generating and optimising the quality of weak samples from training data in deep learning, this paper proposes a semi-supervised building classification framework. Firstly, based on the test results of the remote sensing image segmentation model and the unsupervised classification results of LiDAR point cloud data, this paper quickly generates weak image samples of buildings. Secondly, in order to improve the quality of the spots of the weak samples, an iterative optimisation strategy of the weak samples is proposed to compare and analyse the weak samples with the real samples and extract the accurate samples from the weak samples. Finally, the real samples, the weak samples, and the optimised weak samples are input into the semantic segmentation model of buildings for accuracy evaluation and analysis. The effectiveness of this paper's approach was experimentally verified on two different building datasets, and the optimised weak samples improved by 1.9% and 0.6%, respectively, in the test accuracy mIoU compared to the initial weak samples. The results demonstrate that the semi-supervised classification framework proposed in this paper can be used to alleviate the model's demand for a large number of real-labelled samples while improving the ability to utilise weak samples, and it can be used as an alternative to fully supervised classification methods in deep learning model applications that require a large number of training samples. [ABSTRACT FROM AUTHOR]

Currently, there is a wealth of data and expert knowledge available on monitoring agro-meteorological disasters. However, there is still a lack of technical means to organically integrate and analyze heterogeneous data sources in a collaborative manner. This paper proposes a method for monitoring agro-meteorological disasters based on a spatio-temporal knowledge graph. It employs a semantic ontology framework to achieve the organic fusion of multi-source heterogeneous data, including remote sensing data, meteorological data, farmland data, crop information, etc. And it formalizes expert knowledge and computational models into knowledge inference rules, thereby enabling monitoring, early warning, and disaster analysis of agricultural crops within the observed area. The experimental area for this research is the wheat planting region in three counties in Henan Province. The method is tested using simulation monitoring, early warning, and impact calculation of the past two occurrences of dry hot wind disasters. The experimental results demonstrate that the proposed method can provide more specific and accurate warning information and post-disaster analysis results compared to raw records. The statistical results of NDVI decline also validate the correlation between the severity of wheat damage caused by dry hot winds and the intensity and duration of their occurrences. Regarding remote sensing data, this paper proposes a method that directly incorporates remote sensing data into spatio-temporal knowledge inference calculations. By integrating remote sensing data into the regular monitoring process, the advantages of remote sensing data granted by continuous observation are utilized. This approach represents a beneficial attempt to organically integrate remote sensing and meteorological data for monitoring, early warning, and evaluation analysis of agro-meteorological disasters. [ABSTRACT FROM AUTHOR]

Remote sensing (RS) technology has significantly contributed to geological exploration and mineral resource assessment. However, its effective application in vegetated areas encounters various challenges. This paper aims to provide a comprehensive overview of the challenges and opportunities associated with RS-based lithological identification in vegetated regions which includes the extensively reviewed prior research concerning the identification of lithology in vegetated regions, encompassing the utilized remote sensing data sources, and classification methodologies. Moreover, it offers a comprehensive overview of the application of remote sensing techniques in the domain of lithological mapping. Notably, hyperspectral RS and Synthetic Aperture Radar (SAR) have emerged as prominent tools in lithological identification. In addition, this paper addresses the limitations inherent in RS technology, including issues related to vegetation cover and terrain effects, which significantly impact the accuracy of lithological mapping. To propel further advancements in the field, the paper proposes promising avenues for future research and development. These include the integration of multi-source data to improve classification accuracy and the exploration of novel RS techniques and algorithms. In summary, this paper presents valuable insights and recommendations for advancing the study of RS-based lithological identification in vegetated areas. [ABSTRACT FROM AUTHOR]

In order to obtain high-quality images, the application of low-illumination image enhancement techniques plays a vital role in enhancing the overall visual appeal. However, it is particularly difficult to enhance an image while maintaining the original information of the scene. The augmentation method based on Retinex theory is widely considered as one of the representative techniques for such problems, but this method still has some limitations. First of all, noise is easily ignored in the process of model building, and the robustness of the model needs to be improved. Secondly, the image decomposition is less effective, so that part of the image information is not effectively presented. Finally, the optimization procedure is computationally complicated. This paper introduces a novel approach for enhancing low-illumination images by utilizing the relative deviation of local gradients. The proposed method aims to address the challenges associated with low-illumination images and offers a solution to these issues. In this paper, local gradient relative deviation is used as a constraint term and a noise term is added to highlight the image texture and structure and improve the robustness of the models, considering that L P achieves piecewise smoothing with better sparsity compared to the sum norm commonly used by L 1 and L 2 norms. In this paper, the L 2 − L P norm is used to constrain the model, which smooths the illumination component and better preserves the details of the reflectance component. In addition, to efficiently solve the optimization problem, the alternating direction multiplier method is chosen to transform the optimization process into the solution of several sub-problems. In comparison to traditional Retinex models, the proposed method excels in its ability to simultaneously enhance the image and suppress noise effectively. The experimental outcomes demonstrate the effectiveness of the proposed model in enhancing both simulated and real data. This approach can be applied to low-illumination remote sensing images to obtain high-quality remote sensing image data. [ABSTRACT FROM AUTHOR]

At present, a variety of global remote sensing surface downwelling longwave radiation (SDL) products are used for atmospheric science research; however, there are few studies on the quantitative evaluation of differences among different SDL products. In order to evaluate the differences among different SDL products quantitatively, we have selected three commonly used SDL products—Clouds and the Earth's Radiant Energy System-Synoptic Radiative Fluxes and Clouds (CERES-SYN), the European Centre for Medium Range Weather Forecasts-Surface Radiation Budget (ECMWF-SRB) and the Global Energy and Water Exchanges Project-Surface Radiation Budget (GEWEX-SRB)—to comprehensively study in this paper. The results show that there are significant differences among the three SDL products in some areas, such as in the Arctic, the Antarctic, the Sahara, the Tibet Plateau, and Greenland. The maximum absolute root mean square error (RMSEab) in these areas is greater than 20 Wm−2, the maximum relative root mean square error (RMSEre) is greater than 20%, the maximum and minimum absolute mean bias error (MBEab) are about 20 Wm−2 and −20 Wm−2, respectively, and the maximum and minimum relative mean bias error (MBEre) are about 10% and −10%, respectively. Among the three SDL products, the difference between the ECMWF-SRB and GEWEX-SRB is the most significant. In addition, this paper also analyzed the differences among different SDL products based on three aspects. Firstly, the differences among the three SDL products show that there is significant seasonality, and the differences among different months may vary greatly. However, the differences are not sensitive to years. Secondly, there are some differences in cloud-forcing radiative fluxes (CFRFs) of different SDL products, which is also an important factor affecting the difference between different SDL products. Finally, in the process of converting high temporal resolution SDL products into monthly SDL products, data processing also affects the difference between different SDL products. [ABSTRACT FROM AUTHOR]

Earth observation (EO) techniques have significantly evolved over time, covering a wide range of applications in different domains. The scope of this study is to review the research conducted on EO in the Eastern Mediterranean, Middle East, and North Africa (EMMENA) region and to identify the main knowledge gaps. We searched through the Web of Science database for papers published between 2018 and 2022 for EO studies in the EMMENA. We categorized the papers in the following thematic areas: atmosphere, water, agriculture, land, disaster risk reduction (DRR), cultural heritage, energy, marine safety and security (MSS), and big Earth data (BED); 6647 papers were found with the highest number of publications in the thematic areas of BED (27%) and land (22%). Most of the EMMENA countries are surrounded by sea, yet there was a very small number of studies on MSS (0.9% of total number of papers). This study detected a gap in fundamental research in the BED thematic area. Other future needs identified by this study are the limited availability of very high-resolution and near-real-time remote sensing data, the lack of harmonized methodologies and the need for further development of models, algorithms, early warning systems, and services. [ABSTRACT FROM AUTHOR]

Forest fires are one of the most devastating natural disasters, and technologies based on remote sensing satellite data for fire prevention and control have developed rapidly in recent years. Early forest fire smoke in remote sensing images, on the other hand, is thin and tiny in area, making it difficult to detect. Satellites with high spatial resolution sensors can collect high-resolution photographs of smoke, however the impact of the satellite's repeat access time to the same area means that forest fire smoke cannot be detected in time. Because of their low spatial resolution, photos taken by satellites with shorter return durations cannot capture small regions of smoke. This paper presents an early smoke detection method for forest fires that combines a super-resolution reconstruction network and a smoke segmentation network to address these issues. First, a high-resolution remote sensing multispectral picture dataset of forest fire smoke was created, which included diverse years, seasons, areas, and land coverings. The rebuilt high-resolution images were then obtained using a super-resolution reconstruction network. To eliminate data redundancy and enhance recognition accuracy, it was determined experimentally that the M11 band (2225–2275 nm) is more sensitive to perform smoke segmentation in VIIRS images. Furthermore, it has been demonstrated experimentally that improving the accuracy of reconstructed images is more effective than improving perceptual quality for smoke recognition. The final results of the super-resolution image segmentation experiment conducted in this paper show that the smoke segmentation results have a similarity coefficient of 0.742 to the segmentation results obtained using high-resolution satellite images, indicating that our method can effectively segment smoke pixels in low-resolution remote sensing images and provide early warning of forest fires. [ABSTRACT FROM AUTHOR]

Multi-class geospatial object detection in high-resolution remote sensing images has significant potential in various domains such as industrial production, military warning, disaster monitoring, and urban planning. However, the traditional process of remote sensing object detection involves several time-consuming steps, including image acquisition, image download, ground processing, and object detection. These steps may not be suitable for tasks with shorter timeliness requirements, such as military warning and disaster monitoring. Additionally, the transmission of massive data from satellites to the ground is limited by bandwidth, resulting in time delays and redundant information, such as cloud coverage images. To address these challenges and achieve efficient utilization of information, this paper proposes a comprehensive on-board multi-class geospatial object detection scheme. The proposed scheme consists of several steps. Firstly, the satellite imagery is sliced, and the PID-Net (Proportional-Integral-Derivative Network) method is employed to detect and filter out cloud-covered tiles. Subsequently, our Manhattan Intersection over Union (MIOU) loss-based YOLO (You Only Look Once) v7-Tiny method is used to detect remote-sensing objects in the remaining tiles. Finally, the detection results are mapped back to the original image, and the truncated NMS (Non-Maximum Suppression) method is utilized to filter out repeated and noisy boxes. To validate the reliability of the scheme, this paper creates a new dataset called DOTA-CD (Dataset for Object Detection in Aerial Images-Cloud Detection). Experiments were conducted on both ground and on-board equipment using the AIR-CD dataset, DOTA dataset, and DOTA-CD dataset. The results demonstrate the effectiveness of our method. [ABSTRACT FROM AUTHOR]

Antarctica is of great importance in terms of global warming, the sustainability of resources, and the conservation of biodiversity. However, due to 99.66% of the continent being covered in ice and snow, geological research and geoscientific study in Antarctica face huge challenges. Geophysical surveys play a crucial role in enhancing comprehension of the fundamental structure of Antarctica. This study used bibliometric analysis to analyze citation data retrieved from the Web of Science for the period from 1982 to 2022 with geophysical research on Antarctica as the topic. According to the analysis results, the amount of Antarctic geophysical research has been steadily growing over the past four decades as related research countries/regions have become increasingly invested in issues pertaining to global warming and sustainability, and international cooperation is in sight. Moreover, based on keyword clustering and an analysis of highly cited papers, six popular research topics have been identified: Antarctic ice sheet instability and sea level change, Southern Ocean and Sea Ice, tectonic activity of the West Antarctic rift system, the paleocontinental rift and reorganization, magmatism and volcanism, and subglacial lakes and subglacial hydrology. This paper provides a detailed overview of these popular research topics and discusses the applications and advantages of the geophysical methods used in each field. Finally, based on keywords regarding abrupt changes, we identify and examine the thematic evolution of the nexus over three consecutive sub-periods (i.e., 1990–1995, 1996–2005, and 2006–2022). The relevance of using geophysics to support numerous and diverse scientific activities in Antarctica becomes very clear after analyzing this set of scientific publications, as is the importance of using multiple geophysical methods (satellite, airborne, surface, and borehole technology) to revolutionize the acquisition of new data in greater detail from inaccessible or hard-to-reach areas. Many of the advances that they have enabled be seen in the Antarctic terrestrial areas (detailed mapping of the geological structures of West and East Antarctica), ice, and snow (tracking glaciers and sea ice, along with the depth and features of ice sheets). These valuable results help identify potential future research opportunities in the field of Antarctic geophysical research and aid academic professionals in keeping up with recent advances. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel shape-sensing method based on deep learning with a multi-core optical fiber for the accurate shape-sensing of catheters and guidewires. Firstly, we designed a catheter with embedded multi-core fiber containing three sensing outer cores and one temperature compensation middle core. Then, we analyzed the relationship between the central wavelength shift, the curvature of the multi-core Fiber Bragg Grating (FBG), and temperature compensation methods to establish a Particle Swarm Optimization (PSO) BP neural network-based catheter shape sensing method. Finally, experiments were conducted in both constant and variable temperature environments to validate the method. The average and maximum distance errors of the PSO-BP neural network were 0.57 and 1.33 mm, respectively, under constant temperature conditions, and 0.36 and 0.96 mm, respectively, under variable temperature conditions. This well-sensed catheter shape demonstrates the effectiveness of the shape-sensing method proposed in this paper and its potential applications in real surgical catheters and guidewire. [ABSTRACT FROM AUTHOR]

The rapid advancement of remote sensing technology has significantly enhanced the temporal resolution of remote sensing data. Multitemporal remote sensing image classification can extract richer spatiotemporal features. However, this also presents the challenge of mining massive data features. In response to this challenge, deep learning methods have become prevalent in machine learning and have been widely applied in remote sensing due to their ability to handle large datasets. The combination of remote sensing classification and deep learning has become a trend and has developed rapidly in recent years. However, there is a lack of summary and discussion on the research status and trends in multitemporal images. This review retrieved and screened 170 papers and proposed a research framework for this field. It includes retrieval statistics from existing research, preparation of multitemporal datasets, sample acquisition, an overview of typical models, and a discussion of application status. Finally, this paper discusses current problems and puts forward prospects for the future from three directions: adaptability between deep learning models and multitemporal classification, prospects for high-resolution image applications, and large-scale monitoring and model generalization. The aim is to help readers quickly understand the research process and application status of this field. [ABSTRACT FROM AUTHOR]

In recent years, the tensor completion algorithm has played a vital part in the reconstruction of missing elements within high-dimensional remote sensing image data. Due to the difficulty of tensor rank computation, scholars have proposed many substitutions of tensor rank. By introducing the smooth rank function (SRF), this paper proposes a new tensor rank nonconvex substitution function that performs adaptive weighting on different singular values to avoid the performance deficiency caused by the equal treatment of all singular values. On this basis, a novel tensor completion model that minimizes the SRF as the objective function is proposed. The proposed model is efficiently solved by adding the hot start method to the alternating direction multiplier method (ADMM) framework. Extensive experiments are carried out in this paper to demonstrate the resilience of the proposed model to missing data. The results illustrate that the proposed model is superior to other advanced models in tensor completeness. [ABSTRACT FROM AUTHOR]

Hyperspectral image (HSI) classification is one of the hotspots in remote sensing, and many methods have been continuously proposed in recent years. However, it is still challenging to achieve high accuracy classification in applications. One of the main reasons is the lack of labeled data. Due to the limitation of spatial resolution, manual labeling of HSI data is time-consuming and costly, so it is difficult to obtain a large amount of labeled data. In such a situation, many researchers turn their attention to the study of HSI classification with small samples. Focusing on this topic, this paper provides a systematic review of the research progress in recent years. Specifically, this paper contains three aspects. First, considering that the taxonomy used in previous review articles is not well-developed and confuses the reader, we propose a novel taxonomy based on the form of data utilization. This taxonomy provides a more accurate and comprehensive framework for categorizing the various approaches. Then, using the proposed taxonomy as a guideline, we analyze and summarize the existing methods, especially the latest research results (both deep and non-deep models) that were not included in the previous reviews, so that readers can understand the latest progress more clearly. Finally, we conduct several sets of experiments and present our opinions on current problems and future directions. [ABSTRACT FROM AUTHOR]

In deep learning-based hyperspectral remote sensing image classification tasks, random sampling strategies are typically used to train model parameters for testing and evaluation. However, this approach leads to strong spatial autocorrelation between the training set samples and the surrounding test set samples, and some unlabeled test set data directly participate in the training of the network. This leaked information makes the model overly optimistic. Models trained under these conditions tend to overfit to a single dataset, which limits the range of practical applications. This paper analyzes the causes and effects of information leakage and summarizes the methods from existing models to mitigate the effects of information leakage. Specifically, this paper states the main issues in this area, where the issue of information leakage is addressed in detail. Second, some algorithms and related models used to mitigate information leakage are categorized, including reducing the number of training samples, using spatially disjoint sampling strategies, few-shot learning, and unsupervised learning. These models and methods are classified according to the sample-related phase and the feature extraction phase. Finally, several representative hyperspectral image classification models experiments are conducted on the common datasets and their effectiveness in mitigating information leakage is analyzed. [ABSTRACT FROM AUTHOR]

In the solar reflective band, an on-board calibration method based on a solar diffuser (SD) can realize full aperture, full field of view, and end-to-end absolute radiometric calibration of optical remote sensors. The SD's bidirectional reflectance distribution function (BRDF) is a key parameter that affects the accuracy of the on-board calibration. High-accuracy measurement of the SD BRDF is required in the laboratory before launch. Due to the uncertainty of the goniometer system, polarization effects, and other factors, the measurement uncertainty of the SD BRDF at large incident angles is much higher than that at a 0° incident zenith angle and 45° reflection zenith angle. In this paper, an absolute BRDF measurement facility is reported. The goniometric system consists of a high-brightness integrating sphere as a radiation source, a six-axis robot arm, and a large rotation stage. The measurement wavelength range was from 350 nm to 2400 nm. An improved data processing method based on the reciprocity theorem was proposed to reduce the measurement uncertainty of the SD BRDF at large incident angles. At an incident zenith angle of 75°, the improved data processing method reduced the measurement uncertainty of the SD BRDF by 52% at 410 nm to 480 nm, by 70% at 480 nm to 1000 nm, and by 20% at other bands compared to the absolute measurement method. The influence of the radiation source, goniometer system, detection system, and other factors on the measurement uncertainty are analyzed in this paper. The results show that the measurement uncertainty (coverage factor k = 2) of the SD BRDF was better than 1.04% at 350 nm to 410 nm, 0.60% at 410 nm to 480 nm, 0.43% at 480 nm to 1000 nm, and 0.86% at 1000 nm to 2400 nm. [ABSTRACT FROM AUTHOR]

Over the past two decades, advances in remote sensing methods and technology have enabled larger and more sophisticated datasets to be collected. Due to these advances, the need to effectively and efficiently communicate and visualize data is becoming increasingly important. We demonstrate that the use of mixed- (MR) and virtual reality (VR) systems has provided very promising results, allowing the visualization of complex datasets with unprecedented levels of detail and user experience. However, as of today, such visualization techniques have been largely used for communication purposes, and limited applications have been developed to allow for data processing and collection, particularly within the engineering–geology field. In this paper, we demonstrate the potential use of MR and VR not only for the visualization of multi-sensor remote sensing data but also for the collection and analysis of geological data. In this paper, we present a conceptual workflow showing the approach used for the processing of remote sensing datasets and the subsequent visualization using MR and VR headsets. We demonstrate the use of computer applications built in-house to visualize datasets and numerical modelling results, and to perform rock core logging (XRCoreShack) and rock mass characterization (EasyMineXR). While important limitations still exist in terms of hardware capabilities, portability, and accessibility, the expected technological advances and cost reduction will ensure this technology forms a standard mapping and data analysis tool for future engineers and geoscientists. [ABSTRACT FROM AUTHOR]

The article announces several research papers related to sensing technology that has received the Best Paper Award in 2013 from this very journal including "Metal-Organic Frameworks for Sensing Applications in the Gas Phase," by Sabine Achmann and colleagues, "Miniaturized pH Sensors Based on Zinc Oxide Nanotubes/Nanorods," by Alimujiang Fulati and colleagues and "Applications and Advances in Electronic-Nose Technologies," by Alphus D. Wilson and Manuela Baietto.

This document, titled "Computational Intelligence in Remote Sensing," discusses the application of computational intelligence (CI) methods in the field of remote sensing. It highlights recent research and progress in this area, categorizing the papers into four sections: computational intelligence methods in hyperspectral remote sensing images, object detection techniques in remote sensing images, deep learning approaches in remote sensing image classification, and intelligent optimization and control in satellite image applications. The document emphasizes the potential of CI in addressing the challenges of remote sensing and encourages further interdisciplinary cooperation to solve real-world problems. The authors express their gratitude to the contributors and highlight the achievements of the research papers in this journal. [Extracted from the article]

With the wide application of remote sensing technology, target detection based on deep learning has become a research hotspot in the field of remote sensing. In this paper, aimed at the problems of the existing deep-learning-based desert land intelligent extraction methods, such as the spectral similarity of features and unclear texture features, we propose a multispectral remote sensing image desert land intelligent extraction method that takes into account band information. Firstly, we built a desert land intelligent interpretation dataset based on band weighting to enhance the desert land foreground features of the images. On this basis, we introduced the deformable convolution adaptive feature extraction capability to U-Net and developed the Y-Net model to extract desert land from Landsat remote sensing images covering the Inner Mongolia Autonomous Region. Finally, in order to analyze the spatial and temporal trends of the desert land in the study area, we used a structural equation model (SEM) to evaluate the direct and indirect effects of natural conditions and human activities, i.e., population density (PD), livestock volume (LS), evaporation (Evp), temperature (T), days of sandy wind conditions (LD), humidity (RH), precipitation (P), anthropogenic disturbance index (Adi), and cultivated land (CL). The results show that the F1-score of the Y-Net model proposed in this paper is 95.6%, which is 11.5% more than that of U-Net. Based on the Landsat satellite images, the area of desert land in the study area for six periods from 1990 to 2020 was extracted. The results show that the area of desert land in the study area first increased and then decreased. The main influencing factors have been precipitation, humidity, and anthropogenic disturbance, for which the path coefficients are 0.646, 0.615, and 0.367, respectively. This study will be of great significance in obtaining large-scale and long-term time series of desert land cover and revealing the inner mechanism of desert land area change. [ABSTRACT FROM AUTHOR]

Temperature is an important environmental factor for long-span bridges because it induces thermal loads on structural components that cause considerable displacements, stresses, and structural damage. Hence, it is critical to acquire up-to-date information on the status, sustainability, and serviceability of long-span bridges under daily and seasonal temperature fluctuations. This paper intends to investigate the effects of temperature variability on structural displacements obtained from remote sensing and represent their relationship using supervised regression models. In contrast to other studies in this field, one of the contributions of this paper is to leverage hybrid sensing as a combination of contact and non-contact sensors for measuring temperature data and structural responses. Apart from temperature, other unmeasured environmental and operational conditions may affect structural displacements of long-span bridges separately or simultaneously. For this issue, this paper incorporates a correlation analysis between the measured predictor (temperature) and response (displacement) data using a linear correlation measure, the Pearson correlation coefficient, as well as nonlinear correlation measures, namely the Spearman and Kendall correlation coefficients and the maximal information criterion, to determine whether the measured environmental factor is dominant or other unmeasured conditions affect structural responses. Finally, three supervised regression techniques based on a linear regression model, Gaussian process regression, and support vector regression are considered to model the relationship between temperature and structural displacements and to conduct the prediction process. Temperature and limited displacement data related to three long-span bridges are used to demonstrate the results of this research. The aim of this research is to assess and realize whether contact-based sensors installed in a bridge structure for measuring environmental and/or operational factors are sufficient or if it is necessary to consider further sensors and investigations. [ABSTRACT FROM AUTHOR]

This paper presents a new Remote Hyperspectral Imaging System (RHIS) embedded on an Unmanned Aquatic Drone (UAD) for plastic detection and identification in coastal and freshwater environments. This original system, namely the Remotely Operated Vehicle of the University of Littoral Côte d'Opale (ROV-ULCO), works in a near-field of view, where the distance between the hyperspectral camera and the water surface is about 45 cm. In this paper, the new ROV-ULCO system with all its components is firstly presented. Then, a hyperspectral image database of plastic litter acquired with this system is described. This database contains hyperspectral data cubes of different plastic types and polymers corresponding to the most-common plastic litter items found in aquatic environments. An in situ spectral analysis was conducted from this benchmark database to characterize the hyperspectral reflectance of these items in order to identify the absorption feature wavelengths for each type of plastic. Finally, the ability of our original system RHIS to automatically recognize different types of plastic litter was assessed by applying different supervised machine learning methods on a set of representative image patches of marine litter. The obtained results highlighted the plastic litter classification capability with an overall accuracy close to 90%. This paper showed that the newly presented RHIS coupled with the UAD is a promising approach to identify plastic waste in aquatic environments. [ABSTRACT FROM AUTHOR]

Glacial debris flow is a common natural disaster, and its frequency has been increasing in recent years due to the continuous retreat of glaciers caused by global warming. To reduce the damage caused by glacial debris flows to human and physical properties, glacier susceptibility assessment analysis is needed. Most research efforts consider the effect of existing glacier area and ignore the effect of glacier ablation volume change. In this paper, we consider the impact of glacier ablation volume change to investigate the susceptibility of glacial debris flow. The susceptibility to mudslide was evaluated by taking the glacial mudslide-prone ditch of G318 Linzhi section of Sichuan-Tibet Highway as the research object. First, by using a simple band ratio method with manual correction, we produced a glacial mudslide remote sensing image dataset, and second, we proposed a deep-learning-based approach using a weight-optimized glacial mudslide semantic segmentation model for accurately and automatically mapping the boundaries of complex glacial mudslide-covered remote sensing images. Then, we calculated the ablation volume by the change in glacier elevation and ablation area from 2015 to 2020. Finally, glacial debris flow susceptibility was evaluated based on the entropy weight method and Topsis method with glacial melt volume in different watersheds as the main factor. The research results of this paper show that most of the evaluation indices of the model are above 90%, indicating that the model is reasonable for glacier boundary extraction, and remote sensing images and deep learning techniques can effectively assess the glacial debris flow susceptibility and provide support for future glacial debris flow disaster prevention. [ABSTRACT FROM AUTHOR]

Considering the problem that the timing synchronization calculation in high-speed remote sensing signal reception is complex and it is difficult for it to be parallel, this paper deduces and designs a parallel timing error estimation and correction scheme. This paper presents the design of polyphase DFT filter banks with non-maximum decimation. The feedforward timing error estimation and correction method is then improved to enhance synchronization performance. Finally, an implementation scheme for parallel timing error estimation and correction is proposed using the polyphase filter bank time domain decomposition method and the filter polyphase model. In the estimation module, the parallel implementation structure of the joint second-order and fourth-order cyclic statistics methods is designed, which improves the estimation accuracy. In the correction module, a fractional delay filtering method with higher accuracy is adopted in order to improve the calibration accuracy and reduce the computational complexity. The timing synchronization of a high-speed remote sensing signal with timing error is simulated and verified. The experimental results show that the parallel method proposed in this paper greatly reduces the processing speed of subband data, and has a good synchronization performance, which is close to the theoretical limit in the demodulation error rate. This paper utilizes a multi-phase DFT filter bank architecture to achieve parallel timing synchronization, which presents a novel approach for the future parallel reception of high-speed remote sensing signals. [ABSTRACT FROM AUTHOR]

With the accelerated development of artificial intelligence, remote-sensing image technologies have gained widespread attention in smart cities. In recent years, remote sensing object detection research has focused on detecting and counting small dense objects in large remote sensing scenes. Small object detection, as a branch of object detection, remains a significant challenge in research due to the image resolution, size, number, and orientation of objects, among other factors. This paper examines object detection based on deep learning and its applications for small object detection in remote sensing. This paper aims to provide readers with a thorough comprehension of the research objectives. Specifically, we aggregate the principal datasets and evaluation methods extensively employed in recent remote sensing object detection techniques. We also discuss the irregularity problem of remote sensing image object detection and overview the small object detection methods in remote sensing images. In addition, we select small target detection methods with excellent performance in recent years for experiments and analysis. Finally, the challenges and future work related to small object detection in remote sensing are highlighted. [ABSTRACT FROM AUTHOR]

Flood events are becoming more severe, causing significant problems to human communities, including physical, psychological, and material damage. For both flood forecasting in emergency response situations and flood mapping, georeferencing and data curation are paramount in the context of prevention or preparedness. Hence, data display, data management, and articulation with numerical simulation results must occur on GIS platforms. Our research is motivated by recent advances in Web and GIS technologies, social sensing and high-performance computing, and an envisaged wider availability of remote sensing data. This paper presents and discusses an innovative Web GIS platform named "RiverCure Portal" or "RCP" for short. This platform combines observations and hydrodynamic modelling tools to support various stages of the flood risk management cycle, including operational response, emergency preparedness, and risk assessment. RCP is a multi-organization, multi-context digital platform with flexible configuration features to define and support multiple sensor types and modelling options, satisfying the various needs of different organizations and stakeholders. In addition, this paper discusses the RiverCure Approach, which encompasses the following tasks directly supported by the RCP platform: defining the context and involved geometries, associating sensors to the context, pre-processing and generating the context mesh, defining the simulation event, running the simulation event, and analyzing the results from the simulation event. Thus, the RCP streamlines and simplifies data analysis and simulation procedures to meet decision-makers' needs. The novelties discussed in this paper include the design and discussion of a Web GIS platform that allows (i) to manage flood data and results of simulations at several contextual levels by different stakeholders such as domain experts, decision-makers, researchers, or students; (ii) to process and curate sensed data obtained from physical and social sensors; and (iii) update the state and values of the parameters of simulation tools through continuous data assimilation techniques for forecasting purposes. Finally, this paper supports the explanation and discussion with a running example, "Águeda 2016 flood" event, which dataset is publicly available for further study and experimentation. [ABSTRACT FROM AUTHOR]

The Qinghai–Tibet Plateau is a proven essential water conservation region in Asia. However, various factors, such as anthropogenic activities, climate, and vegetation significantly affect its water conservation. Along these lines, a deep understanding of the spatiotemporal patterns of water conservation for this plateau and relevant influencing elements is considered of great importance. This paper calculates the water conservation on the Qinghai–Tibet Plateau based on the InVEST model, and given that the evapotranspiration data are an important parameter of the InVEST model, this study selects the mainstream evapotranspiration data to compare the accuracy of the simulated water yield, and also selects the most accurate remote sensing evapotranspiration data examined in the study to carry out the study of water conservation on the Qinghai–Tibet Plateau. Due to the large area of the Qinghai–Tibet Plateau and the various types of climate and ecological zones, this paper analyzes the spatial and temporal variations of water conservation on the Qinghai–Tibet Plateau in each ecological zone and climate zone division and detects the factors affecting water conservation on the Qinghai–Tibet Plateau by using the geo-detector method. From our analysis, the following outcomes are proven: on the Qinghai–Tibet Plateau, (1) the overall water conservation decreased from southeast to northwest; (2) the water conservation of the studied plateau in 1990, 2000, 2010, and 2020 was 656.56, 590.85, 597.4, and 651.85 mm, respectively; (3) precipitation, evapotranspiration, and NDVI exhibited a positive relationship with water conservation; (4) the precipitation factor had the biggest impact on the spatial distinctions of the water resource governance; (5) the above factors are combined with the slope factor and the interaction of each factor to improve water conservation. Our work provides valuable insights for the further implementation of ecological projects with a view to enhancing water resource management methods. [ABSTRACT FROM AUTHOR]

Spaceborne GNSS-R technology is a new remote sensing method for soil moisture monitoring. Focusing on the significant influence of water on the surface reflectivity of CYGNSS, this paper improved the removal method of water influence according to the spatial resolution of CYGNSS data. Due to the disturbance effect of the incident angle, microwave frequency and soil type on the Fresnel reflection coefficient in surface reflectivity, a normalization method of Fresnel reflection coefficient was proposed after analyzing the data characteristics of variables in the Fresnel reflection coefficient. Finally, combined with the soil moisture retrieval method of linear equation, the accuracy was compared and verified by using measured data, SMAP products and official CYGNSS products. The results indicate that the normalization method of the Fresnel reflection coefficient could effectively reduce the influence of relevant parameters on the Fresnel reflection coefficient, but the normalization effect became worse at large incident angles (greater than 65°). Compared with the official CYGNSS product, the retrieval accuracy of optimized soil moisture was improved by 10%. The method proposed in this paper will play an important reference role in the study of soil moisture retrieval using spaceborne GNSS-R data. [ABSTRACT FROM AUTHOR]

In this paper, I will show and describe a method of integrating infrared images with a 3D model of the front of an excavation in the longwall type of workings. I will also test the created 3D model for its potential usefulness in geological prospecting, used for looking for changes in geological layout at the front of the excavation. Geological information on the amount of coal in the front is important for the economic side of the excavation. The mine does not want to take out waste rock, but mostly for the safety of operations. The longwall shearers and plows are not designed for excavation in extremely changeable conditions, so if too much shale appears, this might change the speed and economic results of excavation. In addition, if a fold appears, this can destroy the excavating complex. Currently, the geological survey requires a geologist to get to the front, often to the unsupported roof part of the wall, clean the front and sample, and measure the geology. This is dangerous for the geologist. Thus, remote, infrared measurements would improve the safety of the staff and allow the survey to be taken in more places along the longwall. In this paper, I will also propose how such a system could be implemented and what the limitations are. [ABSTRACT FROM AUTHOR]