Search

One important aspect to consider when buying a house or apartment is adequate solar exposure. The same applies to the evaluation of the shadowing effects of existing buildings on prospective construction sites and vice versa. In different climates and seasons, it is not always easy to assess if there will be an excess or lack of sunlight, and both can lead to discomfort and excessive energy consumption. The aim of our project is to design a method to quantify the availability of direct sunlight to answer these questions. We developed a tool in Octave to calculate representative parameters, such as sunlight hours per day over a year and the times of day for which sunlight is present, considering the surrounding objects. The apparent sun position over time is obtained from an existing algorithm and the surrounding objects are surveyed using a picture taken with a 360° camera from a window or other sunlight entry area. The sky regions in the picture are detected and all other regions correspond to obstructions to direct sunlight. The sky detection is not fully automatic, but the sky swap tool in the camera software could be adapted by the manufacturer for this purpose. We present the results for six representative test cases. [ABSTRACT FROM AUTHOR]

The aging population and increasing incidence of trauma among younger age groups have heightened the increasing demand for reliable implant materials. Effective implant materials must demonstrate rapid osseointegration and strong antibacterial properties to ensure optimal patient outcomes and decrease the chance of implant rejection. This study aims to enhance the bone–implant interface by utilizing 45S5 bioglass modified with various concentrations of Fe3O4 as a coating material. The effect of the insertion of Fe3O4 into the bioglass structure was studied using Raman spectroscopy which shows that with the increase in Fe3O4 concentration, new vibration bands associated with Fe-related structural units appeared within the sample. The bioactivity of the prepared glasses was evaluated using immersion tests in simulated body fluid, revealing the formation of a calcium phosphate-rich layer within 24 h on the samples, indicating their potential for enhanced tissue integration. However, the sample modified with 8 mol% of Fe3O4 showed low reactivity, developing a calcium phosphate-rich layer within 96 h. All the bioglasses showed antibacterial activity against the Gram-positive and Gram-negative bacteria. The modified bioglass did not present significant antibacterial properties compared to the bioglass base. [ABSTRACT FROM AUTHOR]

Biodiesel from waste frying oil was produced via methanolysis using biochar-based catalysts prepared by carbonizing banana peels (350 °C and 400 °C) mixed with 20% (wt.) of alkali carbonates (Na, Li, or K). The catalysts exhibited a bi-functional character: acidic and basic. Raman spectroscopy confirmed the alkali's role in char graphitization, influencing morphology and oxygen content. Oxygenated surface sites acted as acidic sites for free fatty acid esterification, while alkali sites facilitated triglyceride transesterification. The best catalyst obtained by carbonization at 350 °C, without alkali modifier, led to 97.5% FAME by processing a waste frying oil with 1.2 mg KOH/g oil acidity. Most of the studied catalysts yielded high-quality glycerin, allowing the significance of homogenous catalyzed processes to be discarded. [ABSTRACT FROM AUTHOR]

Dunaliella salina has been recognized as an excellent biomass source of carotenoid, which can be used as a natural orange coloring agent for food products. The most eco-friendly approach for extracting carotenoid is through supercritical carbon dioxide extraction, as it yields highly concentrated extracts while preventing pigment thermal degradation. However, there are limitations when a lipophilic extract is considered a food ingredient, in particular very difficult handling and low solubility in water-based products. The aim of this study was to develop a hydrosoluble form of a natural carotenoid-rich extract recovered from algae biomass within a biorefinery concept to be incorporated in aqueous-based food products. A two-step process was developed, starting with the emulsification of the supercritical extract into a mixture of maltodextrin and gum arabic, using soy lecithin as an emulsifier. The emulsification was followed by a spray-drying step. The impact of process variables on the encapsulation yield, efficiency, emulsion properties, and particle characteristics was studied. The resulting particles exhibited an intense orange color and good water dispersibility, facilitating uniform yellow coloring when incorporated into an aqueous-based product. Overall, spray-drying emulsions containing carotenoids derived from Dunaliella salina prove to be a promising strategy for the global market demand for natural colorants. [ABSTRACT FROM AUTHOR]

The non-surgical treatments are being required to reconstruct damaged tissue, prioritizing our body's natural healing process. Thus, the use of bioactive materials such as bioactive glass has been studied to support the repair and restoration of hard and soft tissue. Thus, in this work Bioglass 45S5 was developed, adding 1 and 2%mol of SrO or MgO and the physical and biological properties were evaluated. The addition of MgO and SrO at the studied concentrations promoted the slight increase in non-bridging oxygens number, observed through the temperature shift in phase transitions to lower values compared to Bioglass 45S5. The insertion of the ions also showed a positive effect on Saos-2 cell viability, decreasing the cytotoxic of Bioglass 45S5. Besides the Ca/P ratio on the pellets surface demonstrating no evidence of higher reactivity between Bioglass 45S5 and Bioglass with Sr and Mg, micrographs show that at 24 h the Ca/P rich layer is denser than in Bioglass 45S5 after the contact with simulated body fluid. The samples with Sr and Mg show a higher antibacterial effect compared to Bioglass 45S5. The addition of the studied ions may benefit the biological response of Bioglass 45S5 in dental applications as scaffolds or coatings. [ABSTRACT FROM AUTHOR]

Biofilm-related implant infections pose a substantial threat to patients, leading to inflammation in the surrounding tissue, and often resulting in implant loss and the necessity for additional surgeries. Overcoming this implantology challenge is crucial to ensure the success and durability of implants. This study shows the development of antibacterial materials for implant coatings by incorporating copper into 45S5 Bioglass®. By combining the regenerative properties of Bioglass® with the antimicrobial effects of copper, this material has the potential to prevent infections, enhance osseointegration and improve the long-term success of implants. Bioglasses modified with various concentrations of CuO (from 0 to 8 mol%) were prepared with the melt-quenching technique. Structural analysis using Raman and FTIR spectroscopies did not reveal significant alterations in the bioglasses structure with the addition of Cu. The antibacterial activity of the samples was assessed against Gram-positive and Gram-negative bacteria, and the results demonstrated significant inhibition of bacterial growth for the bioglass with 0.5 mol% of CuO. Cell viability studies indicated that the samples modified with up to 4 mol% of CuO maintained good cytocompatibility with the Saos-2 cell line at extract concentrations up to 25 mg/mL. Furthermore, the bioactivity assessment demonstrated the formation of a calcium phosphate (CaP)-rich layer on the surfaces of all bioglasses within 24 h. Our findings show that the inclusion of copper in the bioglass offers a significant enhancement in its potential as a coating material for implants, resulting in notable advancements in both antibacterial efficacy and osteointegration properties. [ABSTRACT FROM AUTHOR]

Implantology is crucial for restoring aesthetics and masticatory function in oral rehabilitation. Despite its advantages, certain issues, such as bacterial infection, may still arise that hinder osseointegration and result in implant rejection. This work aims to address these challenges by developing a biomaterial for dental implant coating based on 45S5 Bioglass® modified by zirconium insertion. The structural characterization of the glasses, by XRD, showed that the introduction of zirconium in the Bioglass network at a concentration higher than 2 mol% promotes phase separation, with crystal phase formation. Impedance spectroscopy was used, in the frequency range of 102–106 Hz and the temperature range of 200–400 K, to investigate the electrical properties of these Bioglasses, due to their ability to store electrical charges and therefore enhance the osseointegration capacity. The electrical study showed that the presence of crystal phases, in the glass ceramic with 8 mol% of zirconium, led to a significant increase in conductivity. In terms of biological properties, the Bioglasses exhibited an antibacterial effect against Gram-positive and Gram-negative bacteria and did not show cytotoxicity for the Saos-2 cell line at extract concentrations up to 25 mg/mL. Furthermore, the results of the bioactivity test revealed that within 24 h, a CaP-rich layer began to form on the surface of all the samples. According to our results, the incorporation of 2 mol% of ZrO2 into the Bioglass significantly improves its potential as a coating material for dental implants, enhancing both its antibacterial and osteointegration properties. [ABSTRACT FROM AUTHOR]

Dental implants have emerged as one of the most consistent and predictable treatments in the oral surgery field. However, the placement of the implant is sometimes associated with bacterial infection leading to its loss. In this work, we intend to solve this problem through the development of a biomaterial for implant coatings based on 45S5 Bioglass® modified with different amounts of niobium pentoxide (Nb2O5). The structural feature of the glasses, assessed by XRD and FTIR, did not change in spite of Nb2O5 incorporation. The Raman spectra reveal the Nb2O5 incorporation related to the appearance of NbO4 and NbO6 structural units. Since the electrical characteristics of these biomaterials influence their osseointegration ability, AC and DC electrical conductivity were studied by impedance spectroscopy, in the frequency range of 102–106 Hz and temperature range of 200–400 K. The cytotoxicity of glasses was evaluated using the osteosarcoma Saos-2 cells line. The in vitro bioactivity studies and the antibacterial tests against Gram-positive and Gram-negative bacteria revealed that the samples loaded with 2 mol% Nb2O5 had the highest bioactivity and greatest antibacterial effect. Overall, the results showed that the modified 45S5 bioactive glasses can be used as an antibacterial coating material for implants, with high bioactivity, being also non-cytotoxic to mammalian cells. [ABSTRACT FROM AUTHOR]

Polymeric membranes are widely used in guided bone regeneration (GBR), particularly in dentistry. In addition, bioactive glasses can be added to the polymers in order to develop a matrix that is osteoconductive and osteoinductive, increasing cell adhesion and proliferation. The bioactive glasses allow the insertion into its network of therapeutic ions in order to add specific biological properties. The addition of zinc into bioactive glasses can promote antibacterial activity and induce the differentiation and proliferation of the bone cells. In this study, bioactive glasses containing zinc (0.25, 0.5, 1 and 2 mol%) were developed and structurally and biologically characterized. The biological results show that the Zn-containing bioactive glasses do not present significant antibacterial activity, but the addition of zinc at the highest concentration does not compromise the bioactivity and promotes the viability of Saos-2 cells. The cell culture assays in the membranes (PCL, PCL:BG and PCL:BGZn2) showed that zinc addition promotes cell viability and an increase in alkaline phosphatase (ALP) production. [ABSTRACT FROM AUTHOR]

Tuberculosis (TB) is still a major worldwide health problem and models using non-human primates (NHP) provide the most relevant approach for vaccine testing. In this study, we analysed CT images collected from cynomolgus and rhesus macaques following exposure to ultra-low dose Mycobacterium tuberculosis (Mtb) aerosols, and monitored them for 16 weeks to evaluate the impact of prior intradermal or inhaled BCG vaccination on the progression of lung disease. All lesions found (2553) were classified according to their size and we subclassified small micronodules (<4.4 mm) as 'isolated', or as 'daughter', when they were in contact with consolidation (described as lesions ≥ 4.5 mm). Our data link the higher capacity to contain Mtb infection in cynomolgus with the reduced incidence of daughter micronodules, thus avoiding the development of consolidated lesions and their consequent enlargement and evolution to cavitation. In the case of rhesus, intradermal vaccination has a higher capacity to reduce the formation of daughter micronodules. This study supports the 'Bubble Model' defined with the C3HBe/FeJ mice and proposes a new method to evaluate outcomes in experimental models of TB in NHP based on CT images, which would fit a future machine learning approach to evaluate new vaccines. [ABSTRACT FROM AUTHOR]

The main reason for the increased use of dental implants in clinical practice is associated with aesthetic parameters. Implants are also presented as the only technique that conserves and stimulates natural bone. However, there are several problems associated with infections, such as peri-implantitis. This disease reveals a progressive inflammatory action that affects the hard and soft tissues surrounding the implant, leading to implant loss. To prevent the onset of this disease, coating the implant with bioactive glasses has been suggested. In addition to its intrinsic function of promoting bone regeneration, it is also possible to insert therapeutic ions, such as cerium. Cerium has several advantages when the aim is to improve osseointegration and prevent infectious problems with dental implant placement. It promotes increased growth and the differentiation of osteoblasts, improves the mechanical properties of bone, and prevents bacterial adhesion and proliferation that may occur on the implant surface. This antibacterial effect is due to its ability to disrupt the cell wall and membrane of bacteria, thus interfering with vital metabolic functions such as respiration. In addition, its antioxidant effect reverses oxidative stress after implantation in bone. In this work, Bioglass 45S5 with CeO2 with different percentages (0.25, 0.5, 1, and 2 mol%) was developed by the melt-quenching method. The materials were analyzed in terms of morphological, structural, and biological (cytotoxicity, bioactivity, and antibacterial activity) properties. The addition of cerium did not promote structural changes to the bioactive glass, which shows no cytotoxicity for the Saos-2 cell line up to 25 mg/mL of extract concentration for all cerium contents. For the maximum cerium concentration (2 mol%) the bioactive glass shows an evident inhibitory effect for Escherichia coli and Streptococcus mutans bacteria. Furthermore, all samples showed the beginning of the deposition of a CaP-rich layer on the surface of the material after 24 h. [ABSTRACT FROM AUTHOR]

Biofilm-associated infections are a public health concern especially in the context of healthcare-associated infections such as catheter-related bloodstream infections (CRBSIs). We evaluated the biofilm formation and antimicrobials resistance (AMR) of Enterobacter cloacae complex and Candida parapsilosis co-isolated from a CRBSI patient. Antimicrobial susceptibility of central venous catheters (CVCs) and hemoculture (HC) isolates was evaluated, including whole genome sequencing (WGS) resistome analysis and evaluation of gene expression to obtain insight into their AMR determinants. Crystal violet assay was used to assess dual biofilm biomass and microscopy was used to elucidate a microorganism's distribution within biofilms assembled on different materials. Bacteria were multidrug-resistant including resistance to colistin and beta-lactams, likely linked to the mcr-9-like phosphoethanolamine transferase and to an ACT family cephalosporin-hydrolyzing class C beta-lactamase, respectively. The R398I and Y132F mutations in the ERG11 gene and its differential expression might account for C. parapsilosis resistance to fluconazole. The phenotype of dual biofilms assembled on glass, polystyrene and polyurethane depends on the material and how biofilms were initiated by one or both pathogens. Biofilms assembled on polyurethane were denser and richer in the extracellular polymeric matrix, and microorganisms were differently distributed on the inner/outer surface of the CVC. [ABSTRACT FROM AUTHOR]

Applying the correct set of Boolean operations is a fundamental task in constructive solid geometry (CSG), which is a staple in automated manufacturing systems. Although textual buttons and icons are the most common interfaces to apply such operations, these require an unnecessary cognitive load that hampers the solid modeling process. This study presents VennPad, a novel CSG widget that gathers all Boolean operations under the same user interface control element and is represented as a two-set Venn diagram. Contrary to conventional CSG widgets, VennPad supports a graphical interface that gives simultaneous access to several types of Boolean operations (intersection, union, difference, symmetric difference and split). A usability study was conducted to ascertain whether VennPad is a more natural interface compared to textual buttons and icon-based widgets for different solid modeling tasks. VennPad proved to be an effective interface to perform Boolean operations. Qualitative feedback places VennPad as the preferred interface, but efficiency results are operation dependent, thus, opening the way to new design iterations. [ABSTRACT FROM AUTHOR]

Simple Summary: Besides showing the antibacterial activity of the Preyssler-type polyoxotungstate (POT) P5W30 with the ability to affect MRSA cells, we demonstrated that P5W30 also displays other proprieties, such as anti-quorum sensing and antibiofilm. These are biological activities that are reported for a POT for the first time. Quorum sensing and biofilm facilitate the bacterial colonization, antibiotic resistance and persistence in both the environment and host, and its impairment by POTs can greatly contribute to the control of bacterial infections, such as those caused by multiresistant bacteria. Moreover, antiviral activity was also observed using the enterovirus Qβ. NMR stability studies of P5W30 demonstrate that it remains intact, suggesting its responsibility in the described biological activities. Taken together, our results emphasize the potential biomedical use of POTs, particularly the Preyssler-type POT, to fight antibiotic-resistant MRSA strains and their ability to form biofilm, besides being a promising antiviral agent. The increase in bacterial resistance to antibiotics has led researchers to find new compounds or find combinations between different compounds with potential antibacterial action and with the ability to prevent the development of antibiotic resistance. Polyoxotungstates (POTs) are inorganic clusters that may fulfill that need, either individually or in combination with antibiotics. Herein, we report the ability of the polyoxotungstates (POTs) with Wells-Dawson P2W18, P2W17, P2W15, and Preyssler P5W30 type structures to differently affect Gram-negative and Gram-positive microorganisms, either susceptible or resistant to antibiotics. The compound P5W30 showed the highest activity against the majority of the tested bacterial strains in comparison with the other tested POTs (P2W15, P2W17 and P2W18) that did not show inhibition zones for the Gram-negative bacteria, A. baumanii I73775, E. coli DSM 1077, E. coli I73194, K. pneumoniae I7092374, and P. aeruginosa C46281). Generally, the results evidenced that Gram-positive bacteria are more susceptible to the POTs tested. The compound P5W30 was the one most active against S. aureus ATCC 6538 and MRSA16, reaching <0.83 mg·mL−1 (100 μM) and 4.96 mg·mL−1 (600 μM), respectively. Moreover, it was verified by NMR spectroscopy that the most promising POT, P5W30, remains intact under all the experimental conditions, after 24 h at 37 °C. This prompted us to further evaluate the anti-quorum sensing activity of P5W30 using the biosensor Chromobacterium violaceum CV026, as well as its antibiofilm activity both individually and in combination with the antibiotic cefoxitin against the methicillin-resistant Staphylococcus aureus 16 (MRSA16). P5W30 showed a synergistic antibacterial effect with the antibiotic cefoxitin and chloramphenicol against MRSA16. Moreover, the antibiofilm activity of P5W30 was more pronounced when used individually, in comparison with the combination with the antibiotic cefoxitin. Finally, the antiviral activity of P5W30 was tested using the coliphage Qβ, showing a dose-dependent response. The maximum inactivation was observed at 750 μM (6.23 mg·mL−1). In sum, P5W30 shows anti-quorum sensing and antibiofilm activities besides being a potent antibacterial agent against S. aureus and to exhibit antiviral activities against enteric viruses. [ABSTRACT FROM AUTHOR]

Neurotoxicity induced in fish by domoic acid (DA) was assessed with respect to occurrence of neurotoxic signs, lethality, and histopathology by light microscopy. Sparus aurata were exposed to a single dose of DA by intraperitoneal (i.p.) injection of 0, 0.45, 0.9, and 9.0 mg DA kg-1 bw. Mortality (66.67 ± 16.67%) was only observed in dose of 9.0 mg kg-1 bw. Signs of neurological toxicity were detected for the doses of 0.9 and 9.0 mg DA kg-1 bw. Furthermore, the mean concentrations (±SD) of DA detected by HPLC-UV in extracts of brain after exposure to 9.0 mg DA kg-1 bw were 0.61 ± 0.01, 0.96 ± 0.00, and 0.36 ± 0.01 mg DA kg-1 tissue at 1, 2, and 4 hours. The lack of major permanent brain damage in S. aurata, and reversibility of neurotoxic signs, suggest that lower susceptibility to DA or neuronal recovery occurs in affected individuals. [ABSTRACT FROM AUTHOR]

The valorization of Atlantic cod (Gadus morhua) frames from a filleting industry was investigated using subcritical water extraction and hydrolysis (SBW) at different temperatures (90, 140, 190 and 250 °C) and 100 bar to obtain extracts rich in proteins, peptides and amino acids. Up to 57.7 g of extract per 100 g of codfish frames were obtained, with nearly total recovery of the protein fraction. At each temperature, protein extracts of decreasing molecular weight were obtained, according to SEC-GPC results. Most of the protein present in the raw material and extracts was collagen and collagen fragments, as suggested by the amino acid profile. Codfish SBW extracts did not show cytotoxicity in the range of concentrations tested and the protein extract obtained at the lowest temperature (90 °C) showed the highest anti-inflammatory potential in human intestinal epithelium cell model. The mineralized residue left after SBW treatment of cod frames was identified as practically pure, crystalline, hydroxyapatite, that may find applications in biomedical field and hard-tissue engineering. This study shows the possible valorization of cod frames using green extraction methods such as SBW process to obtain protein extracts for food and nutraceutical applications. [ABSTRACT FROM AUTHOR]

Ten million cases of tuberculosis (TB) were reported in 2018 with a further 1.5 million deaths attributed to the disease. Improved vaccination strategies are urgently required to tackle the ongoing global TB epidemic. In the absence of a validated correlate of protection, highly characterised pre-clinical models are required to assess the protective efficacy of new vaccination strategies. In this study, we demonstrate the application of a rhesus macaque ultra-low dose (ULD) aerosol M. tuberculosis challenge model for the evaluation of TB vaccination strategies by directly comparing the immunogenicity and efficacy of intradermal (ID) and aerosol BCG vaccination delivered using a portable vibrating mesh nebulizer (VMN). Aerosol- and ID-delivered Bacille Calmette-Guérin (BCG) induced comparable frequencies of IFN-γ spot forming units (SFU) measured in peripheral blood mononuclear cells (PBMCs) by ELISpot, although the induction of IFN-γ SFU was significantly delayed following aerosol immunisation. This delayed response was also apparent in an array of secreted pro-inflammatory and chemokine markers, as well as in the frequency of antigen-specific cytokine producing CD4 and CD8 T-cells measured by multi-parameter flow cytometry. Interrogation of antigen-specific memory T-cell phenotypes revealed that vaccination-induced CD4 and CD8 T-cell populations primarily occupied the central memory (TCM) and transitional effector memory (TransEM) phenotype, and that the frequency of CD8 TCM and TransEM populations was significantly higher in aerosol BCG-vaccinated animals in the week prior to M. tuberculosis infection. The total and lung pathology measured following M. tuberculosis challenge was significantly lower in vaccinated animals relative to the unvaccinated control group and pathology measured in extra-pulmonary tissues was significantly reduced in aerosol BCG-vaccinated animals, relative to the ID-immunised group. Similarly, significantly fewer viable M. tuberculosis CFU were recovered from the extra-pulmonary tissues of aerosol BCG-vaccinated macaques relative to unvaccinated animals. In this study, a rhesus macaque ULD M. tuberculosis aerosol challenge model was applied as a refined and sensitive system for the evaluation of TB vaccine efficacy and to confirm that aerosol BCG vaccination delivered by portable VMN can confer a significant level of protection that is equivalent, and by some measures superior, to intradermal BCG vaccination. [ABSTRACT FROM AUTHOR]