Search

The Tonnoidea Suter, 1913 (1825) is a moderately diverse group of large predatory gastropods, the systematics of which remain unclear. In the present study, the complete mitochondrial genomes of nine Tonnoidean species were sequenced. All newly sequenced mitogenomes contain 13 protein-coding genes (PCGs), 22 transfer RNA genes and two ribosomal RNA genes, showing similar patterns in genome size, gene order and nucleotide composition. The ratio of nonsynonymous to synonymous of PCGs indicated that NADH complex genes of Tonnoideans were experiencing a more relaxed purifying selection compared with the COX genes. The reconstructed phylogeny based on the combined amino acid sequences of 13 protein-coding genes and the nucleotide sequences of two rRNA genes supported that Ficidae Meek, 1864 (1840) is a sister to Tonnoidea. The monophylies of all Tonnoidean families were recovered and the internal phylogenetic relationships were consistent with the current classification. The phylogeny also revealed that Tutufa rebuta (Linnaeus, 1758) is composed of at least two different species, indicating that the species diversity within Bursidae Thiele, 1925 might be underestimated. The present study contributes to the understanding of the Tonnoidean systematics, and it could provide important information for the revision of Tonnoidean systematics in the future.

The complete mitogenomes of Pinctada albina and Pinctada margaritifera were sequenced in this study, with sizes of 23,841 bp and 15,556 bp, respectively. The mitochondrial genome analysis of eight Pterioidea species indicated the existence of gene rearrangements within the superfamily. The ATP8 gene was not detected in the two new mitogenomes, and rrnS was found to be duplicated in P. albina’s mitogenome. The reconstructed phylogeny based on mitogenomes strongly supported the monophyly of Pterioidea and provided robust statistical evidence of the phylogenetic relationships within Pteriomorphia. The analysis of the mitochondrial gene order revealed that of P. margaritifera to be the same as the ancestral order of Pterioidea. The gene orders of the Pterioidea species were mapped to the phylogenetic tree, and the gene rearrangement events were inferred. These results provide important insights that will support future research, such as studies extending the evolutionary patterns of the gene order from P. margaritifera to other species and determining the evolutionary status of Pterioidea within the infraclass Pteriomorphia.

The mitochondrial (mt) genome is an important tool when studying the evolution of metazoan animals. The oyster family Gryphaeidae, together with Ostreidae, is one of the two extant taxa of superfamily Ostreoidea. Up until now, the available mitochondrial genomes of oysters were all limited to family Ostreidae. In the present study, the first complete mtDNA of family Gryphaeidae represented by Hyotissa hyotis was sequenced and compared with other available ostreoid mtDNA. The mtDNA of H. hyotis is 22,185 bp in length, encoding 13 protein-coding-genes (PCGs), two ribosomal RNA (rRNA) and 23 transfer RNA (tRNA) genes. Within all the intergenic regions that range from 2 to 1528 bp, two large non-coding regions were identified. The first large non-coding region, located between Cox1 and trnA, contains 1528 nucleotides, while the second one is 1191 bp in length and positioned between Cytb and Nad2. The nucleotide composition of the whole mtDNA is A + T biased, accounting for 59.2%, with a negative AT skew value of −0.20 and a positive GC skew value of 0.33. In contrast to the mtDNA of Ostreidae, neither the split of rrnL nor rrnS was detected in that of H. hyotis. The duplication of trnW of H. hyotis was also discovered for the first time within Ostreoidea. The gene order of H. hyotis is quite different from those of ostreids, indicating extensive rearrangements within superfamily Ostreoidea. The reconstructed phylogeny supported H. hyotis as sister to Ostreidae, with the latter clade formed by Ostrea + (Saccostrea + Crassostrea). This study could provide important information for further understanding the mitochondrial evolution of oysters.

Titanium alloy is a type of high-strength material that is difficult to process. In particular, in the aerospace field, the processing accuracy of titanium alloy is high. Recently, laser processing has emerged as a new technology with high processing precision. However, the laser processing methods have obvious differences in processing accuracy and effect. Among them, the laser spiral scanning method plays an important role in welding and drilling, but owing to the complexity of the laser molten pool behavior, there have been limited studies on the material removal mechanism based on laser spiral scanning. To understand the variable process of titanium alloy melt pool in laser spiral scanning processing, a light heat conduction model with mass transfer source term was simulated. The effects of laser power, scanning speed, and scanning path on the morphology were studied. The simulation results show that the unit energy density was the main factor for material removal, and the distribution of the material temperature affected the size of the recast layer. The experimental and simulation results were compared, and good agreement between them was observed. This study can provide a research foundation for the further application of laser spiral scanning technology.

The spike protein (S) plays a crucial role in porcine epidemic diarrhea virus (PEDV) infection and induces neutralizing antibodies. Mutations of the S protein are supposed to provide the main antigenic shift leading to the antigenic escape of PEDVs. It is therefore a significant question how much accumulation of antigenic shift could lead to the antigenic escape of the variant PEDV. To provide an answer in the study, B cell epitopes (BCEs) on the S protein of the PEDV vaccine strain CV777 (SCV777) and variant strain SD2014 (SSD2014) were mapped using biosynthetic peptides and rabbit anti-PEDV S serum. Seventy-nine and 68 linear BCEs were identified from SCV777 and SSD2014, respectively. While 66.2% of the BCEs of SSD2014 could be recognized by anti-SCV777 serum and 67.1% of SCV777 BCEs could be recognized by anti-SSD2014 serum, more than 40% of the BCEs identified using anti-SCV777 serum on SCV777 could not be recognized by anti-SSD2014 serum and vice versa. The completely shared BCEs took low percentages of 29.4% and 25.3% for SSD2014 and SCV777, respectively. These results indicate a low conservation of antigenicity of the S protein compared to a relatively high amino acid sequence similarity of 92.2% between the two strains. The study provided a BCE shift reference of PEDV antigenic escape and surveillance control.

Flexible pressure sensors have received much attention due to their widespread potential applications in electronic skins, health monitoring, and human–machine interfaces. Graphene and its derivatives hold great promise for two-dimensional sensing materials, owing to their superior properties, such as atomically thin, transparent, and flexible structure. The high performance of most graphene-based pressure piezoresistive sensors relies excessively on the preparation of complex, post-growth transfer processes. However, the majority of dielectric substrates cannot hold in high temperatures, which can induce contamination and structural defects. Herein, a credibility strategy is reported for directly growing high-quality vertical graphene (VG) on a flexible and stretchable mica paper dielectric substrate with individual interdigital electrodes in plasma-enhanced chemical vapor deposition (PECVD), which assists in inducing electric field, resulting in a flexible, touchable pressure sensor with low power consumption and portability. Benefitting from its vertically directed graphene microstructure, the graphene-based sensor shows superior properties of high sensitivity (4.84 KPa−1) and a maximum pressure range of 120 KPa, as well as strong stability (5000 cycles), which makes it possible to detect small pulse pressure and provide options for preparation of pressure sensors in the future.

A quickly tunable wettability pattern plays an important role in regulating the surface behavior of liquids. Light irradiation can effectively control the pattern to achieve a specific wettability pattern on the photoresponsive material. However, metal oxide materials based on light adjustable wettability have a low regulation efficiency. In this paper, zinc (Zn) superhydrophobic surfaces can be obtained by femtosecond-laser-ablated microholes. Owing to ultraviolet (UV) irradiation increasing the surface energy of Zn and heating water temperature decreasing the surface energy of water, the wettability of Zn can be quickly tuned photothermally. Then, the Zn superhydrophobic surfaces can be restored by heating in the dark. Moreover, by tuning the pattern of UV irradiation, a specific wettability pattern can be transferred by the Zn microholes, which has a potential application value in the field of new location-controlled micro-/nanofluidic devices, such as microreactors and lab-on-chip devices.

Microholes have crucial applications in aerospace, the automotive industry, and other industries. In this study, the microhole processing technology based on the femtosecond-laser spiral trepanning method was investigated. By adjusting the spiral scanning path, laser power distribution, and defocusing amount to control laser energy distribution, an inverted cone hole, straight hole, and normal cone hole were obtained finally. The morphology and element of the microhole were investigated by scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX). The experimental results of the femtosecond-laser spiral trepanning method could achieve fewer impurities. Finally, the formation mechanisms of different microholes are explained in detail. The method is simpler and more efficient than the traditional microhole processing technology. The femtosecond-laser spiral trepanning method with controllable hole roundness, accuracy, and taper has important practical significance in microhole processing.

Surface roughness and the material removal rate (MRR) are two important indicators during the grinding process. The former determines the surface quality while the latter reflects the grinding efficiency directly. In this paper, the two indicators are taken into consideration simultaneously and differently by converting them into a comprehensive goal with using weighting objective method. A prediction model was established for each comprehensive goal with each different combination of surface roughness and MRR weighting coefficient. The optimal value of abrasive size, contact force, belt linear speed, and feed speed were obtained under different grinding situations by using a central composite design (CCD) combined with response surface analysis. The experimental results showed that the comprehensive goal can be used effectively as an indicator to control the grinding performance and improve the optimization process.