Search

Special load customers such as electric vehicles are emerging in modern power systems. They lead to a higher penetration of special load patterns, raising difficulty for short-term load forecasting (STLF). We propose a hierarchical STLF framework to improve load forecasting accuracy. An improved adaptive K-means clustering algorithm is designed for load pattern recognition and avoiding local sub-optimal clustering centroids. We also design bi-directional long-short-term memory neural networks with an attention mechanism to filter important load information and perform load forecasting for each recognized load pattern. The numerical results on the public load dataset show that our proposed method effectively forecasts the residential load with a high accuracy.

Inertial Measurement Unit (IMU) sensor-based gait phase recognition is widely used in medical and biomechanics fields requiring gait data analysis. However, there are several limitations due to the low reproducibility of IMU sensor attachment and the sensor outputs relative to a fixed reference frame. The prediction algorithm may malfunction when the user changes their walking direction. In this paper, we propose a gait phase recognition method robust to user body movements based on a floating body-fixed frame (FBF) and bi-directional long short-term memory (bi-LSTM). Data from four IMU sensors attached to the shanks and feet on both legs of three subjects, collected via the FBF method, are processed through preprocessing and the sliding window label overlapping method before inputting into the bi-LSTM for training. To improve the model’s recognition accuracy, we selected parameters that influence both training and test accuracy. We conducted a sensitivity analysis using a level average analysis of the Taguchi method to identify the optimal combination of parameters. The model, trained with optimal parameters, was validated on a new subject, achieving a high test accuracy of 86.43%.

This study proposes a telemanipulation framework with two wearable IMU sensors without human skeletal kinematics. First, the states (intensity and direction) of spatial hand-guiding gestures are separately estimated through the proposed state estimator, and the states are also combined with the gesture’s mode (linear, angular, and via) obtained with the bi-directional LSTM-based mode classifier. The spatial pose of the 6-DOF manipulator’s end-effector (EEF) can be controlled by combining the spatial linear and angular motions based on integrating the gesture’s mode and state. To validate the significance of the proposed method, the teleoperation of the EEF to the designated target poses was conducted in the motion-capture space. As a result, it was confirmed that the mode could be classified with 84.5% accuracy in real time, even during the operator’s dynamic movement; the direction could be estimated with an error of less than 1 degree; and the intensity could be successfully estimated with the gesture speed estimator and finely tuned with the scaling factor. Finally, it was confirmed that a subject could place the EEF within the average range of 83 mm and 2.56 degrees in the target pose with only less than ten consecutive hand-guiding gestures and visual inspection in the first trial.

The accuracy of the wearable inertia-measurement-unit (IMU)-sensor-based gesture recognition may be significantly affected by undesired changes in the body-fixed frame and the sensor-fixed frame according to the change in the subject and the sensor attachment. In this study, we proposed a novel wearable IMU-sensor-based hand-guiding gesture recognition method robust to significant changes in the subject’s body alignment based on the floating body-fixed frame method and the bi-directional long short-term memory (bi-LSTM). Through comparative experimental studies with the other two methods, it was confirmed that aligning the sensor-fixed frame with the reference frame of the human body and updating the reference frame according to the change in the subject’s body-heading direction helped improve the generalization performance of the gesture recognition model. As a result, the proposed floating body-fixed frame method showed a 91.7% test accuracy, confirming that it was appropriate for gesture recognition under significant changes in the subject’s body alignment during gestures.

Depth video sequence-based deep models for recognizing human actions are scarce compared to RGB and skeleton video sequences-based models. This scarcity limits the research advancements based on depth data, as training deep models with small-scale data is challenging. In this work, we propose a sequence classification deep model using depth video data for scenarios when the video data are limited. Unlike summarizing the frame contents of each frame into a single class, our method can directly classify a depth video, i.e., a sequence of depth frames. Firstly, the proposed system transforms an input depth video into three sequences of multi-view temporal motion frames. Together with the three temporal motion sequences, the input depth frame sequence offers a four-stream representation of the input depth action video. Next, the DenseNet121 architecture is employed along with ImageNet pre-trained weights to extract the discriminating frame-level action features of depth and temporal motion frames. The extracted four sets of feature vectors about frames of four streams are fed into four bi-directional (BLSTM) networks. The temporal features are further analyzed through multi-head self-attention (MHSA) to capture multi-view sequence correlations. Finally, the concatenated genre of their outputs is processed through dense layers to classify the input depth video. The experimental results on two small-scale benchmark depth datasets, MSRAction3D and DHA, demonstrate that the proposed framework is efficacious even for insufficient training samples and superior to the existing depth data-based action recognition methods.

Energy storage technologies are being used excessively in industrial applications and in automobiles. Battery state of charge (SOC) is an important metric to be monitored in these applications to ensure proper and safe functionality. Since SOC cannot be measured directly, this paper puts forth a novel machine learning architecture to improve on the existing methods of SOC estimation. This method consists of using combined stacked bi-directional LSTM and encoder–decoder bi-directional long short-term memory architecture. This architecture henceforth represented as SED is implemented to overcome the nonparallel functionality observed in traditional RNN algorithms. Estimations were made utilizing different open-source datasets such as urban dynamometer driving schedule (UDDS), highway fuel efficiency test (HWFET), LA92 and US06. The least Mean Absolute Error observed was 0.62% at 25 °C for the HWFET condition, which confirms the good functionality of the proposed architecture.

Human activity recognition (HAR) remains a challenging yet crucial problem to address in computer vision. HAR is primarily intended to be used with other technologies, such as the Internet of Things, to assist in healthcare and eldercare. With the development of deep learning, automatic high-level feature extraction has become a possibility and has been used to optimize HAR performance. Furthermore, deep-learning techniques have been applied in various fields for sensor-based HAR. This study introduces a new methodology using convolution neural networks (CNN) with varying kernel dimensions along with bi-directional long short-term memory (BiLSTM) to capture features at various resolutions. The novelty of this research lies in the effective selection of the optimal video representation and in the effective extraction of spatial and temporal features from sensor data using traditional CNN and BiLSTM. Wireless sensor data mining (WISDM) and UCI datasets are used for this proposed methodology in which data are collected through diverse methods, including accelerometers, sensors, and gyroscopes. The results indicate that the proposed scheme is efficient in improving HAR. It was thus found that unlike other available methods, the proposed method improved accuracy, attaining a higher score in the WISDM dataset compared to the UCI dataset (98.53% vs. 97.05%).