Search

Thermoelectric power generation is an emerging renewable energy technology, while its widespread application has been limited by its constrained output capacity. The figure of merit (ZT ) of thermoelectric materials serves as a crucial metric for performance assessment. However, researchers primarily focus on increasing the numerical value of ZT , neglecting the fact that a high ZT does not directly translate into superior performance. In this study, we employed finite element simulations to analyze the temperature-dependent properties of thermoelectric materials and examined the impact of the Seebeck coefficient, electrical and thermal conductivity on output performance of thermoelectric generators (TEG) during operation. The results reveal that a high ZT does not guarantee superior output performance. Conversely, thermal property of materials exerts more influence on output capacity than electrical property. Through appropriate adjustments, the maximum output power can be increased by up to 13%, or the maximum efficiency can be enhanced by 6% even maintaining the same ZT . Furthermore, we discuss the practical scenarios during operation and demonstrate that excessive external loads or low thermal conductivity can induce significant thermal stress on the thermoelectric device. This study would provide valuable reference for future optimal utilization of TEG to achieve high output performance and stable operation. [ABSTRACT FROM AUTHOR]

Gridization is an emerging molecular integration technology that enables the creation of multifunctional organic semiconductors through precise linkages. While Friedel-Crafts gridization of fluorenols is potent, direct linkage among fluorene molecules poses a challenge. Herein, we report an achiral Pd-PPh3-cataylized diastereoselective (>99:1 d.r.) gridization based on the C-H-activation of fluorene to give dimeric and trimeric windmill-type nanogrids (DWGs and TWGs). These non-conjugated stereo-nanogrids showcase intramolecular multiple H...H interactions with a low field shift to 8.51 ppm and circularly polarized luminescence with high luminescent dissymmetry factors (|gPL | = 0.012). Significantly, the nondoped organic light-emitting diodes (OLEDs) utilizing cis-trans-TWG1 emitter present an ultraviolet electroluminescent peak at ~386 nm (CIE: 0.17, 0.04) with a maximum external quantum efficiency of 4.17%, marking the highest record among nondoped ultraviolet OLEDs based on hydrocarbon compounds and the pioneering ultraviolet OLEDs based on macrocycles. These nanohydrocarbon offer potential nanoscafflolds for ultraviolet light-emitting optoelectronic applications. Gridization is useful for creating multifunctional organic semiconductors. Here, the authors report a C-H activatived gridization to synthesize UV-emitting molecular nanohydrocarbon, setting high external quantum efficiency for hydrocarbon-based UV-OLEDs. [ABSTRACT FROM AUTHOR]

Temporal muscle thickness measured on 3D MRI has recently been linked to prognosis in glioblastoma patients and may serve as an independent prognostic indicator. This single-center study looked at temporal muscle thickness and prognosis in patients with primary glioblastoma. Overall survival was the major study outcome. For a retrospective analysis from 2010 to 2020, clinical data from 102 patients with glioblastoma at the Department of Oncology Radiotherapy of the First Affiliated Hospital of Dalian Medical University were gathered. Fifty-five cases from 2016 to 2020 contained glioblastoma molecular typing data, of which 45 were IDH wild-type glioblastomas and were analysed separately. TMT was measured on enhanced T1-weighted magnetic resonance images in patients with newly diagnosed glioblastoma.Overall patient survival (OS) was calculated by the Kaplan–Meier method and survival curves were plotted using the log-rank-sum test to determine differences between groups, and multifactorial analyses were performed using a Cox proportional-risk model.The median TMT for 102 patients was 6.775 mm (range: 4.95–10.45 mm). Patients were grouped according to median TMT, and the median overall survival (23.0 months) was significantly longer in the TMT > median group than in the TMT median group (P 0.001; Log-rank test). Analysing 45 patients with IDH wild type alone, the median overall survival (12 months) of patients in the TMT > median group was significantly longer than that of patients in the TMT ≤ median group (8 months) (P < 0.001; Log-rank test).TMT can serve as an independent prognostic factor for glioblastoma. [ABSTRACT FROM AUTHOR]

High throughput screening (HTS) methods of enzyme variants are essential for the development of robust biocatalysts suited for low impact, industrial scale, biobased synthesis of a myriad of compounds. However, for the majority of enzyme classes, current screening methods have limited throughput, or need expensive substrates in combination with sophisticated setups. Here, we present a straightforward, high throughput selection system that couples sucrose synthase activity to growth. Enabling high throughput screening of this enzyme class holds the potential to facilitate the creation of robust variants, which in turn can significantly impact the future of cost effective industrial glycosylation. [ABSTRACT FROM AUTHOR]

With the continuous increase of mining in depth, the gas extraction faces the challenges of low permeability, great ground stress, high temperature and large gas pressure in coal seam. The controllable shock wave (CSW), as a new method for enhancing permeability of coal seam to improve gas extraction, features in the advantages of high efficiency, eco-friendly, and low cost. In order to better utilize the CSW into gas extraction in coal mine, the mechanism and feasibility of CSW enhanced extraction need to be studied. In this paper, the basic principles, the experimental tests, the mathematical models, and the on-site tests of CSW fracturing coal seams are reviewed, thereby its future research directions are provided. Based on the different media between electrodes, the CSW can be divided into three categories: hydraulic effect, wire explosion and excitation of energetic materials by detonating wire. During the process of propagation and attenuation of the high-energy shock wave in coal, the shock wave and bubble pulsation work together to produce an enhanced permeability effect on the coal seam. The stronger the strength of the CSW is, the more cracks created in the coal is, and the greater the length, width and area of the cracks being. The repeated shock on the coal seam is conducive to the formation of complex network fracture system as well as the reduction of coal seam strength, but excessive shock frequency will also damage the coal structure, resulting in the limited effect of the enhanced gas extraction. Under the influence of ground stress, the crack propagation in coal seam will be restrained. The difference of horizontal principal stress has a significant impact on the shape, propagation direction and connectivity of the CSW induced cracks. The permeability enhancement effect of CSW is affected by the breakage degree of coal seam. The shock wave is absorbed by the broken coal, which may hinder the propagation of CSW, resulting in a poor effect of permeability enhancement. When arranging two adjacent boreholes for CSW permeability enhancement test, the spacing of boreholes should not be too close, which may lead to negative pressure mutual pulling in the early stage of drainage. At present, the accurate method for effectively predicting the CSW permeability enhanced range should be further investigated. [ABSTRACT FROM AUTHOR]

Blood orange (BO) is a rare red-fleshed sweet orange (SWO) with a high anthocyanin content and is associated with numerous health-related benefits. Here, we reported a high-quality chromosome-scale genome assembly for Neixiu (NX) BO, reaching 336.63 Mb in length with contig and scaffold N50 values of 30.6 Mb. Furthermore, 96% of the assembled sequences were successfully anchored to 9 pseudo-chromosomes. The genome assembly also revealed the presence of 37.87% transposon elements and 7.64% tandem repeats, and the annotation of 30,395 protein-coding genes. A high level of genome synteny was observed between BO and SWO, further supporting their genetic similarity. The speciation event that gave rise to the Citrus species predated the duplication event found within them. The genome-wide variation between NX and SWO was also compared. This first high-quality BO genome will serve as a fundamental basis for future studies on functional genomics and genome evolution. [ABSTRACT FROM AUTHOR]

Recent developments in intelligent robot systems, especially autonomous vehicles, put forward higher requirements for safety and comfort. Road conditions are crucial factors affecting the comprehensive performance of ground vehicles. Nonetheless, existing environment perception datasets for autonomous driving lack attention to road surface areas. In this paper, we introduce the road surface reconstruction dataset, providing multi-modal, high-resolution, and high-precision data collected by real-vehicle platform in diverse driving conditions. It covers common road types containing approximately 16,000 pairs of stereo images, point clouds, and ground-truth depth/disparity maps, with accurate data processing pipelines to ensure its quality. Preliminary evaluations reveal the effectiveness of our dataset and the challenge of the task, underscoring substantial opportunities of it as a valuable resource for advancing computer vision techniques. The reconstructed road structure and texture contribute to the analysis and prediction of vehicle responses for motion planning and control systems. [ABSTRACT FROM AUTHOR]

Copyright of Advances in Atmospheric Sciences is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Recent years have witnessed great progress in creating vivid audio-driven portraits from monocular videos. However, how to seamlessly adapt the created video avatars to other scenarios with different backgrounds and lighting conditions remains unsolved. On the other hand, existing relighting studies mostly rely on dynamically lighted or multi-view data, which are too expensive for creating video portraits. To bridge this gap, we propose ReliTalk, a novel framework for relightable audio-driven talking portrait generation from monocular videos. Our key insight is to decompose the portrait's reflectance from implicitly learned audio-driven facial normals and images. Specifically, we involve 3D facial priors derived from audio features to predict delicate normal maps through implicit functions. These initially predicted normals then take a crucial part in reflectance decomposition by dynamically estimating the lighting condition of the given video. Moreover, the stereoscopic face representation is refined using the identity-consistent loss under simulated multiple lighting conditions, addressing the ill-posed problem caused by limited views available from a single monocular video. Extensive experiments validate the superiority of our proposed framework on both real and synthetic datasets. Our code is released in (https://github.com/arthur-qiu/ReliTalk). [ABSTRACT FROM AUTHOR]

Carbon fiber-reinforced composites (CFRCs) have been widely used in automotive, aerospace, sports equipment, and other industrial fields, due to the higher strength-to-weight ratio and modulus compared with metals and alloys. Innovations in additive-manufactured CFRCs have opened up new avenues for designing and manufacturing high-performance, low-cost complex composite structures. According to the structure and substrate type of carbon fiber, this paper firstly reviews the existing feasible technologies as well as their key elements and focuses on the research of additive manufactured CFRCs by fused deposition molding (FDM) and selective laser sintering (SLS). Furthermore, the typical applications and envisions of additive manufactured CFRCs were elaborated. Moreover, the existing challenges and problems are summarized from the aspects of materials, equipment, and software. In the future, more interdisciplinary research is needed on advanced materials, multiple processes, advanced equipment, and structural design, and there will be a broader research space for robot-assisted additive manufacturing and green manufacturing methods. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) are mostly used for monitoring the environment; however, they are usually powered by non-rechargeable batteries with limited energy. Solar energy harvesting is an attractive solution to the limit by charging the sensor nodes; however, the harvested solar energy is easily affected by weather conditions. Based on the characteristics of uncertainty and intermittency of solar energy, this paper proposes a plus-profile solar energy prediction algorithm. This algorithm makes the prediction of future available solar energy by finding the data in the dataset that is most similar to the data of the day and combining it with recent weather trend. According to the predicted result, the paper further proposes an adaptive energy management scheme to suit the harvested energy. In the scheme, sensor nodes can adaptively adjust task scheduling to achieve energy neutrality. The simulation results show that compared with other algorithms, the prediction accuracy of the proposed prediction algorithm is improved by 17.7 and 22.4%, respectively, and the proposed energy management scheme reduced energy loss by 6.2 and 46.8%, respectively. [ABSTRACT FROM AUTHOR]

Single cell chromatin accessibility profiling and transcriptome sequencing are the most widely used technologies for single-cell genomics. Here, we present Microwell-seq3, a high-throughput and facile platform for high-sensitivity single-nucleus chromatin accessibility or full-length transcriptome profiling. The method combines a preindexing strategy and a penetrable chip-in-a-tube for single nucleus loading and DNA amplification and therefore does not require specialized equipment. We used Microwell-seq3 to profile chromatin accessibility in more than 200,000 single nuclei and the full-length transcriptome in ~50,000 nuclei from multiple adult mouse tissues. Compared with the existing polyadenylated transcript capture methods, integrative analysis of cell type-specific regulatory elements and total RNA expression uncovered comprehensive cell type heterogeneity in the brain. Gene regulatory networks based on chromatin accessibility profiling provided an improved cell type communication model. Finally, we demonstrated that Microwell-seq3 can identify malignant cells and their specific regulons in spontaneous lung tumors of aged mice. We envision a broad application of Microwell-seq3 in many areas of research. [ABSTRACT FROM AUTHOR]

To investigate the endothelialization of covered and bare stents deployed in the canine carotid arteries and subclavian arteries for treating experimental aneurysms and arteriovenous fistulas, twenty aneurysms were created in 10 dogs, and 20 fistulas in another 10 dogs. The Willis balloon-expandable covered stent and a self-expandable covered stent were used to treat these lesions, and a self-expandable bare stent was deployed in the subclavian artery for comparison. Followed up for up to 12 months, the gross observation, pathological staining, and scanning electronic microscopic data were analyzed. Two weeks after creation of animal model, thirty self-expandable covered stents and ten balloon-expandable covered stents were deployed. Fifteen bare stents were deployed within the left subclavian arteries. Twenty days after stenting, the aneurysm significantly shrank. At 6 months, the thrombi within the aneurysm cavity were organized. Three to 12 months later, most covered and bare stents were covered by a thin transparent or white layer of endothelial intima. Layers of intima or pseudomembrane were formed on the stent 20–40 days after stent deployment. Over three months, the pseudomembrane became organized, thinner, and merged into the vascular wall. Under scanning electronic microscopy, the surface of covered and bare stents had only deposition of collagen fibers and rare endothelial cells 20–40 days after stenting. From three to ten months, the endothelial cells on the internal surface of stent became mature, with spindle, stripe-like or quasi round morphology along the blood flow direction. Over time, the endothelial cells became mature. In conclusion, three months after deployment in canines' arteries, the self-expandable bare and covered stents have mostly been covered by endothelial cells which become maturer over time, whereas the balloon-expandable covered stents do not have complete coverage of endothelial cells at three months, especially for protruding stent struts and areas. Over time, the endothelialization will become mature. [ABSTRACT FROM AUTHOR]

Electrospun scaffolds play important roles in the fields of regenerative medicine and vascular tissue engineering. The aim of the research described here was to develop a vascular scaffold that mimics the structural and functional properties of natural vascular scaffolding. The mechanical properties of artificial vascular tissue represent a key issue for successful transplantation in small diameter engineering blood vessels. We blended silk fibroin (SF) and fibrin to fabricate a composite scaffold using electrospinning to overcome the shortcomings of fibrin with respect to its mechanical properties. Subsequently, we then carefully investigated the morphological, mechanical properties, hydrophilicity, hemocompatibility, degradation, cytocompatibility and biocompatibility of the SF/fibrin (0:100), SF/fibrin (15:85), SF/fibrin (25:75), and SF/fibrin (35:65) scaffolds. Based on these in vitro results, we implanted SF/fibrin (25:75) vascular scaffold subcutaneously and analyzed its in vivo degradation and histocompatibility. The fiber structure of the SF/fibrin hybrid scaffold was smooth and uniform, and its fiber diameters were relatively small. Compared with the fibrin scaffold, the SF/fibrin scaffold clearly displayed increased mechanical strength, but the hydrophilicity weakened correspondingly. All of the SF/fibrin scaffolds showed excellent blood compatibility and appropriate biodegradation rates. The SF/fibrin (25:75) scaffold increased the proliferation and adhesion of MSCs. The results of animal experiments confirmed that the degradation of the SF/fibrin (25:75) scaffold was faster than that of the SF scaffold and effectively promoted tissue regeneration and cell infiltration. All in all, the SF/fibrin (25:75) electrospun scaffold displayed balanced and controllable biomechanical properties, degradability, and good cell compatibility. Thus, this scaffold proved to be an ideal candidate material for artificial blood vessels. [ABSTRACT FROM AUTHOR]

High-power inductors are fundamental components in high-power DC–DC converters, with their performance being a crucial metric of converter efficiency. This paper presents an in-depth analysis of a novel calculation method for the air gap length in such inductors. Taking into account the effects of air gap diffusion and the winding magnetic field, an expression for the air gap diffusion radius is derived, focusing on a distributed air gap structure. Furthermore, models for calculating the air gap and winding reluctance are developed, grounded in electromagnetic field theory. An equivalent magnetic circuit model, formulated based on Kirchhoff's second law, facilitates the proposed method for air gap length calculation. This study also involves the development of 3D models for both discrete and decoupled integrated inductors. The comparison between simulation outcomes and calculated air gap lengths indicates a maximum error of less than 8%, with the minimum error being as low as − 0.79%. Compared with traditional methods, the calculation method proposed in this paper has significant advantages. Additionally, the discrepancy between calculated values and experimental measurements is found to be 1.11%. These results validate the accuracy and applicability of the theoretical analysis and calculation method, underscoring their significance in the design and optimization of high-power DC–DC converters. [ABSTRACT FROM AUTHOR]

Objective: To establish a model for predicting lymph node metastasis in bladder cancer (BCa) patients. Methods: We retroactively enrolled 239 patients who underwent three-phase CT and resection for BCa in two centers (training set, n = 185; external test set, n = 54). We reviewed the clinical characteristics and CT features to identify significant predictors to construct a clinical model. We extracted the hand-crafted radiomics features and deep learning features of the lesions. We used the Minimum Redundancy Maximum Relevance algorithm and the least absolute shrinkage and selection operator logistic regression algorithm to screen features. We used nine classifiers to establish the radiomics machine learning signatures. To compensate for the uneven distribution of the data, we used the synthetic minority over-sampling technique to retrain each machine-learning classifier. We constructed the combined model using the top-performing radiomics signature and clinical model, and finally presented as a nomogram. We evaluated the combined model’s performance using the area under the receiver operating characteristic, accuracy, calibration curves, and decision curve analysis. We used the Kaplan–Meier survival curve to analyze the prognosis of BCa patients. Results: The combined model incorporating radiomics signature and clinical model achieved an area under the receiver operating characteristic of 0.834 (95% CI: 0.659–1.000) for the external test set. The calibration curves and decision curve analysis demonstrated exceptional calibration and promising clinical use. The combined model showed good risk stratification performance for progression-free survival. Conclusion: The proposed CT-based combined model is effective and reliable for predicting lymph node status of BCa patients preoperatively. Critical relevance statement: Bladder cancer is a type of urogenital cancer that has a high morbidity and mortality rate. Lymph node metastasis is an independent risk factor for death in bladder cancer patients. This study aimed to investigate the performance of a deep learning radiomics model for preoperatively predicting lymph node metastasis in bladder cancer patients. Key points: • Conventional imaging is not sufficiently accurate to determine lymph node status. • Deep learning radiomics model accurately predicted bladder cancer lymph node metastasis. • The proposed method showed satisfactory patient risk stratification for progression-free survival. [ABSTRACT FROM AUTHOR]

Phosgene is a highly concealed and highly toxic gas that seriously threatens human health and public security. Therefore, the detection of phosgene is of great significance to world security. Herein, a new type of fluorescent probe based on 2-(2-aminophenyl) imidazo [1,5-a] pyridine is reported for the rapid detection of phosgene. The probe itself only emits a faint green fluorescence, while phosgene allows it to produce a strong blue fluorescence. During the recognition process, phosgene interacts simultaneously with both amino site and imidazole moiety in the probe molecule, resulting in a four-ring-fused rigid structure with high fluorescence quantum yield. The probe not only has the characteristics of high efficiency, high sensitivity (detection limit 2.68 nM), and high selectivity, but also has remarkable spectral changes. Finally, a portable test strip is used to detect phosgene in the gas phase, and the fluorescent color change of the test strip can be easily observed. The most exciting thing is that the portable test strip with the probe PMPY-NH2 can produce a strong fluorescence response to 1 ppm of phosgene, which is far lower than the level of phosgene that seriously threatens to human health. [ABSTRACT FROM AUTHOR]

To evaluate the safety and efficacy of low-intensity focused ultrasound (LIFU) therapy in facilitating fundus descent and relieving postpartum breast pain compared with sham treatment. A multicentre, randomised, sham-controlled, blinded trial was conducted. A cohort of 176 eligible participants, who had normal prenatal check-ups and met the inclusion and exclusion criteria, were recruited from three medical centres and subsequently randomized into either the LIFU or sham group. All participants received three treatment sessions, wherein LIFU signal was applied to the uterus and breast sites using coupling gel, with the absence of ultrasound signal output in the sham group. Fundal height measurement and breast pain score were performed after each treatment. The primary outcome, uterine involution, was presented by measuring the fundal height of the uterus. The visual analogue scale (VAS) score, as a secondary outcome, was used to assess breast pain and determine the correlation between breast pain and fundal height as the outcome simultaneously. All participants were randomly assigned to either the LIFU group (n = 88) or sham group (n = 88), with seven individuals not completing the treatment. Overall, a statistically significant difference was noted in the rate and index of fundus descent after each treatment. The rate and index of fundus descent showed greater significance following the second treatment (rate: 1.5 (1.0, 2.0) cm/d; index: 0.15 (0.1, 0.18), P < 0.001) and third treatment (rate: 1.67 (1.33, 2.0) cm/d; index: 0.26 (0.23, 0.3), P < 0.001) in the LIFU group. VAS scores, which were based on the continuous variables for the baseline, first, second, and third treatments in the LIFU group (2.0 (2.0, 3.0), 1.0 (0.0, 2.0), 0.0 (0.0, 1.0), and 0.0 (0.0, 0.0) points, respectively), and the sham group (2.0 (2.0, 2.0), 2.0 (1.0, 2.0), 2.0 (1.0, 3.0), and 3.0 (1.0, 3.0) points, respectively), showed a statistically significant difference between the two groups. Meanwhile, the discrepancies in VAS score classification variables between the two groups were statistically significant. After the third treatment, a notable correlation was observed between the VAS score decrease and fundus descent rate; the more the VAS score decreased, the faster was the fundal decline rate in the LIFU group. LIFU therapy is safe and effective, contributing to the acceleration of uterine involution and the relief of postpartum breast pain. Trial ID The study has registered in the Chinese Clinical Trial Registry (ChiCTR2100049586) at 05/08/2021. [ABSTRACT FROM AUTHOR]

Context: This work theoretically demonstrates a catalyst of copper monatomic wire supported on graphene nanoribbons (Cu-GNR) with a high efficiency for nitric oxide electroreduction reaction (NORR). This not only decreases the usage rate of noble metals but also possesses superior limiting potential comparable to pure Cu (− 0.69 and − 0.61 V, vs. reversible hydrogen electrode (RHE)). The key is that Cu-GNR will have more efficient catalytic activity for NORR when fully covered by NO, since these weaken the adsorption ability of the reduction steps at the beginning. In sum, our findings may offer a platform for clarifying the effects of the concentration of reactants on catalytic process. Methods: Spin-polarized DFT with ultrasoft pseudopotentials as implemented in the CASTEP code was used in this work. The exchange correlation effects were described by generalized gradient approximation (GGA) with Perdew-Burke-Ernzerhof (PBE) functional. The dispersion correction within Grimme scheme (DFT-D2) was employed to accurately describe the van der Waals (vdW) interactions. The Hirshfeld population analysis was adopted to evaluate the charge transfer. [ABSTRACT FROM AUTHOR]

Carbon films have been considered suitable to be applied in water lubrication since they exhibit excellent friction-reducing and wear resistance, chemical inertness, etc. However, the basic understanding of tribological behaviors of carbon-based films under water lubrication still needs to be explored. In the present work, carbon films with different nanostructures were prepared by the electron cyclotron resonance (ECR) plasma nano-surface manufacturing system, and micro-textures with different sizes were prepared on the surface of carbon films by plasma etching. The influence of nanostructure and surface texture on the tribological properties of carbon films was investigated. The results show that different nanostructured carbon films can obtain lower friction coefficients and longer wear life under water lubrication than under dry condition. Due to low surface roughness, high hardness, and compact structure, the tribological properties of amorphous carbon (a-C) films under water lubrication are much better than those of graphene sheet-embedded carbon (GSEC) films. The prepared surface texture has a negative effect on the hard a-C film, but it can make the soft GSEC film generate soft wear debris at the initial stage. With the action of water, the soft wear debris is bonded on the surface of the contacting ball to form a silt-like transfer film, which increases the wear life by nearly three orders of magnitude. These results extend the basic understanding of the tribological behavior of carbon film under water lubrication, which is crucial in both fundamental and applied science. [ABSTRACT FROM AUTHOR]

Pathological cardiac hypertrophy (CH) is featured by myocyte enlargement and cardiac malfunction. Multiple signaling pathways have been implicated in diverse pathological and physiological processes in CH. However, the function of LOC102549726/miR-760-3p network in CH remains unclear. Here, we characterize the functional role of LOC102549726/miR-760-3p network in CH and delineate the underlying mechanism. The expression of LncRNA LOC102549726 and hypertrophic markers was significantly increased compared to the control, while the level of miR-760-3p was decreased. Next, we examined ER stress response in a hypertrophic cardiomyocyte model. The expression of ER stress markers was greatly enhanced after incubation with ISO. The hypertrophic reaction, ER stress response, and increased potassium and calcium ion channels were alleviated by genetic downregulation of LOC102549726. It has been demonstrated that LOC102549726 functions as a competitive endogenous RNA (ceRNA) of miR-760-3p. Overexpression of miR-760-3p decreased cell surface area and substantially mitigated ER stress response; protein levels of potassium and calcium channels were also significantly up-regulated compared to the NC control. In contrast, miR-760-3p inhibition increased cell size, aggravated CH and ER stress responses, and reduced ion channels. Collectively, in this study we demonstrated that the LOC102549726/miR-760-3p network was a crucial regulator of CH development. Ion channels mediate the ER stress response and may be a downstream sensor of the LOC102549726/miR-760-3p network. Therefore, these findings advance our understanding of pathological CH and provide new insights into therapeutic targets for cardiac remodeling. [ABSTRACT FROM AUTHOR]

The degradation process of returned straw in rice fields can improve soil organic matter and promote sustainable agriculture. The degradation process of returned straw is a humification process as well as a mineralization process involving microorganisms and enzymes. However, the degradation process of returned straw, the effect on straw decomposing microorganisms and the regulatory mechanism on potential functionality under cool climate flooding conditions are currently unknown.For this purpose, we investigated the biodegradation of straw from a biodegradation point of view at 20, 40, 71, 104, and 137 d after return under conventional (130 kg hm−2), 1/3 straw return (2933 kg hm−2), 2/3 straw return (5866 kg hm−2), and full straw return (8800 kg hm−2) applications in cool climate rice fields.. The test found Paludibacteraceae and Archaeaceae were the dominant bacteria for straw degradation, and their relative abundance was highest when 2/3 of straw was returned to the field. The straw degradation extracellular enzyme activity was higher in the late return period (104 d). At this time, the potential functionality of the soil differed significantly among the different return amounts, with the best extracellular enzyme activity and potential functionality at the 2/3 straw return amount. Therefore, the optimal amount of rice straw returned to the field is 5866 kg hm−2 at the current conventional N application rate (130 kg hm−2) in the cold zone. [ABSTRACT FROM AUTHOR]

Oxaliplatin is widely used in chemotherapy for colorectal cancer (CRC), but its sensitivity has become a major obstacle to limiting efficacy. Many literatures reported that Nrf2 activation promoted tumor chemoresistance. In this study, we explored the role and mechanism of Nrf2 inhibition in oxaliplatin-based chemosensitivity of CRC. In vitro experiments, we applied 4-octyl itaconate (4-OI) to activate Nrf2, and used lentivirus to knock down Nrf2 in CRC cell lines. By measuring cell viability, colony formation, apoptosis, reactive oxygen species production, and western blot, we found that oxaliplatin and lobaplatin suppressed the growth of HCT-116 and LOVO cells in a dose-dependent manner, and promoted the expression of Nrf2. 4-OI, an Nrf2 activator, reduced the sensibility of CRC cells to oxaliplatin and lobaplatin, while the knockdown of Nrf2 promoted the sensibility of CRC cells to oxaliplatin and lobaplatin. Through the public databases, we found that the expression of GPX4 in normal tissues was lower compared with cancer tissues in CRC, and the high GPX4 expression predicted a poor prognosis. Meanwhile, we found that oxaliplatin reduced the expression of GPX4 in vitro. The knockdown of Nrf2 enhanced the effects of oxaliplatin to reduce the expression of GPX4 and GSH content, and increase the MDA content, which enhanced oxaliplatin-induced ferroptosis. Subsequently, we found that oxaliplatin promoted the expression of GSDME-N, and induced LDH, IL-1β, and TNF-a release, and the knockdown of Nrf2 aggravated the occurrence of GSMDE-mediated pyroptosis. Finally, we found that the knockdown of Nrf2 enhanced the inhibition of oxaliplatin on HCT116 xenograft tumor growth in vivo. Thus, our study showed that Nrf2 inhibition improved sensitivity to oxaliplatin of CRC cells by promoting ferroptosis and pyroptosis, which provided a new target for overcoming chemoresistance in CRC. [ABSTRACT FROM AUTHOR]

Objective: To analyze the effectiveness of combining immune checkpoint inhibitors (ICIs) with first-line therapy in patients with advanced biliary tract cancer (BTC) and explore the biomarkers affecting the prognosis of immunotherapy, to construct a nomogram for the prediction of survival. Methods: A retrospective study was conducted to include a total of 209 patients with advanced BTC treated in the first line from 2018 to 2022, divided into a combination therapy group (n = 129) and a chemotherapy-only group (n = 80) according to whether ICIs were applied in combination. Univariate and multifactorial COX regression analyses were performed on variables that may affect prognosis to identify independent influences on patient prognosis, and this was used to create nomograms, which were then prospectively validated and calibrated. Results: The median progression-free survival (mPFS) and median overall survival (mOS) of patients in the combination therapy group were higher than those in the chemotherapy alone group [hazard ratio (HR) = 1.152, 95% confidence interval (CI): 0.7848–1.692, p = 0.0004, and HR = 1.067, 95% CI: 0.7474–1.524, p = 0.0016]. The objective response rate (ORR) of patients in the combination therapy and chemotherapy alone groups was 39.5% (51/129) vs. 27.5% (22/80), and the disease control rate (DCR) between the two groups was 89.9% (116/129) vs. 83.8% (67/80). Univariate analysis revealed the gender, presence of long-term tobacco and alcohol, degree of histological differentiation, serum albumin level, presence of liver metastases, presence of multi-visceral metastases, response, neutrophil-to-lymphocyte ratio (NLR), platelet-to-lymphocyte ratio (PLR), monocyte-to-lymphocyte ratio (MLR), glycoprotein antigen 19-9 (CA19-9), systemic inflammatory index (SII), and controlling nutritional status (CONUT) scores were statistically significant with patient prognosis (all P values < 0.05). Multi-factor COX regression analysis was continued for the above variables, and the results showed that NLR, MLR, PLR, SII, and CONUT scores were independent influences on patients' OS (all p values < 0.05). A nomogram (C-index 0.77, 95% CI: 0.71–0.84) was created based on these independent influences and later validated using a validation cohort (C-index 0.75, 95% CI: 0.68–0.81). The time-dependent receiver operator characteristic curve (ROC) showed that the area under curve (AUC) of the training cohort patients at 12, 18, and 24 months was 0.72 (95% CI: 0.63–0.81), 0.75 (95% CI: 0.67–0.85), and 0.77 (95% CI: 0.66–0.87) and the AUC of the validation cohort was 0.69 (95% CI: 0.58–0.79), 0.74 (95% CI: 0.65–0.87), and 0.71 (95% CI: 0.64–0.89), respectively. Finally, calibration was performed using calibration curves, and the results showed that nomograms based on inflammatory metrics and CONUT scores could be used to assess survival (12, 18, and 24 months) in patients with advanced BTC treated with ICIs in the first line. Conclusion: Patients with advanced BTC benefit more from first-line treatment with standard chemotherapy in combination with ICIs than with chemotherapy alone. In addition, nomograms based on inflammatory metrics and CONUT scores can be used to predict survival at 12, 18, and 24 months in patients with advanced BTC treated with ICIs. [ABSTRACT FROM AUTHOR]

Context: Dihydroxylammonium 5,5'-biotetrazolium-1,1'-diolate (TKX-50) has two important properties of typical azole energy-containing ionic salts, including high energy and safety. Therefore, in today's era where more emphasis is placed on explosive performance and explosive detonation control conditions, TKX-50 is a very important object of research, and its reaction process in the initial stage of detonation is gradually receiving more and more attention from researchers in the field of energy-containing materials research. Methods: In this paper, based on first-principles density-functional theory (DFT), the mechanism of chemical bond breakage of TKX-50 under pressure was determined based on the analysis of the strength and stability of chemical bonds inside the TKX-50 molecules using Raman spectroscopy relative intensity analysis. The results show that TKX-50 is dominated by N–H bond breaking and followed by H–O bond breaking in the initial reaction stage. These reactions lead to the reorganization and structural changes within the molecule, which eventually lead to the decomposition of TKX-50. [ABSTRACT FROM AUTHOR]

Objectives: The microbial community structure of the saccharifying starter, Nongxiangxing Daqu(Daqu), is a crucial factor in determining Baijiu's quality. Lactic acid bacteria (LAB), are the dominant microorganisms in the Daqu. The present study investigated the effects of LAB on the microbial community structure and its contribution to microbial community function during the fermentation of Daqu. Methods: The effect of LAB on the structure and function of the microbial community of Daqu was investigated using high-throughput sequencing technology combined with multivariate statistical analysis. Results: LAB showed a significant stage-specific evolution pattern during Daqu fermentation. The LEfSe analysis and the random forest learning algorithm identified LAB as vital differential microorganisms during Daqu fermentation. The correlation co-occurrence network showed aggregation of LAB and Daqu microorganisms, indicating LAB's significant position in influencing the microbial community structure, and suggests that LAB showed negative correlations with Bacillus, Saccharopolyspora, and Thermoactinomyces but positive correlations with Issatchenkia, Candida, Acetobacter, and Gluconobacter. The predicted genes of LAB enriched 20 functional pathways during Daqu fermentation, including Biosynthesis of amino acids, Alanine, aspartate and glutamate metabolism, Valine, leucine and isoleucine biosynthesis and Starch and sucrose metabolism, which suggested that LAB had the functions of polysaccharide metabolism and amino acid biosynthesis. Conclusion: LAB are important in determining the composition and function of Daqu microorganisms, and LAB are closely related to the production of nitrogenous flavor substances in Daqu. The study provides a foundation for further exploring the function of LAB and the regulation of Daqu quality. [ABSTRACT FROM AUTHOR]

In this paper, pure Zn, as-cast and as-homogenized Zn-xMg (x = 0.5, 0.8, 1) alloys, and as-extruded Zn-0.8 Mg alloy were systematically studied. Microstructural analysis proved that the as-cast alloys were composed of Zn matrix, MgZn2 phase and Mg2Zn11 phase, while MgZn2 phase dissolved into the matrix after homogenization heat treatment. Compared with the as-cast alloys, the grains of as-homogenized alloys became coarser with the decrease in hardness values. Finally, the Zn-0.8 Mg alloy with outstanding comprehensive performance was selected for hot extrusion processing, thus further refining the structure. Specifically, the comprehensive mechanical properties were much improved for as-extruded Zn-0.8 Mg alloy. However, the corrosion resistance of as-extruded Zn-0.8 Mg alloy reduced slightly. [ABSTRACT FROM AUTHOR]

There have been high demands of high-quality, highly efficient processing methodologies on "difficult-to-cut" titanium alloys. The current methods for dealing with this kind of materials are mainly mechanical cutting ones. However, because of high processing costs, poor surface qualities, and restrictive machining operations, the costs of mechanical cutting methods are high. Electrical discharge machining (EDM), because of its flexibility, was considered as a supplement. However, serious difficulties arose while machining titanium alloys by EDM. Because of low thermo-conductivity of titanium alloys, the liquid temperature in gap between electrode and workpiece rose quickly after a series of pulse discharges. The high temperature of gap liquid usually led to gap liquid breakdown strength to decline. The consequence was discharging pulses tended out to be stable arc pulses or short pulses, burning workpiece surface and wearing electrode. The machining process became unstable. The low thermal conductivity of titanium alloys was the inherent property which could be hardly changed, and at present, the only way to settle the hard-to-cut problem of machining titanium alloys by EDM was to seek a way to keep gap liquid breakdown strength not go down so fast but still be suitable for effective pulse discharges. To solve this problem, this paper first listed three conditions to be met and analyzed the reasons to affect gap liquid breakdown strength in detail and concluded with three factors, gap distance, amount of chips left in gap, and gap liquid deionization after pulse discharges and then came up with a proposition to the problem. Technically, the proposition was accomplished by constructing a multiple-variable adaptive control system in which gap servo-voltage proportional to gap distance was in charge of discharging extent of pulses, electrode-discharging time decided the amount of chips produced in an electrode discharging cycle, and pulse-off time decided gap liquid deionization after discharges. These variables were timely regulated to keep the liquid breakdown strength suitable for discharging and meanwhile avoiding arcing in machining. The verification test demonstrated that the multivariable control system really helped electrical discharge machining titanium alloys in severe machining situations and proved its usefulness in applications. [ABSTRACT FROM AUTHOR]

MSB2311 is a novel pH-dependent humanized anti-programmed death-ligand 1 (PD-L1) monoclonal antibody. This phase I study primarily aimed to determine the maximum tolerated dose (MTD)/recommended phase 2 dose level (RP2D) of MSB2311 in patients with advanced solid tumors or lymphoma. MSB2311 was intravenously administered at 3, 10, and 20 mg/kg every 3 weeks (Q3W) and 10 mg/kg every 2 weeks (Q2W) using 3 + 3 design. During expansion phase, eligible patients with either PD-L1 overexpression, Epstein-Barr Virus positive, microsatellite instability high/mismatch repair deficient, or high tumor mutation burden tumors were treated at RP2D. A total of 37 Chinese patients were treated, including 31 with solid tumors and 6 lymphoma. No dose limiting toxicity was reported and MTD was not reached. The trial was expanded at 20 mg/kg Q3W or 10 mg/kg Q2W, both of which were determined as RP2D. Most common drug-related treatment-emergent adverse events were anemia (43.2%), aspartate aminotransferase increase (27.0%), proteinuria (21.6%), alanine aminotransferase increase and hypothyroidism (18.9% each), thyroid stimulating hormone increased and hyperglycemia (16.2% each). Out of 20 efficacy evaluable patients with biomarker positive solid tumors, 6 achieved confirmed partial response with the median duration of response of 11.0 months (95% CI 7.0–11.4) and 4 had stable disease, resulting an objective response rate of 30.0% (95% CI 11.9, 54.3) and disease control rate of 50.0% (95% CI 27.2, 72.8). One partial response was also observed among 6 patients with lymphoma. MSB2311 demonstrated a manageable safety profile and promising antitumor activity in patients with advanced solid tumors and lymphomas. [ABSTRACT FROM AUTHOR]

Inhibin subunit beta A (INHBA) is a member of the transforming growth factor-beta (TGF-β) superfamily that plays a fundamental role in various cancers. However, a systematic analysis of the exact role of INHBA in patients with gastric cancer (GC) has not yet been conducted. We evaluated the expression levels of INHBA and the correlation between INHBA and GC prognosis in GC. The relationship between INHBA expression, immune infiltration levels, and type markers of immune cells in GC was also explored. In addition, we studied INHBA mutations, promoter methylation, and functional enrichment analysis. Besides, high expression levels of INHBA in GC were significantly related to unfavorable prognosis. INHBA was negatively correlated with B cell infiltration, but positively correlated with macrophage and most anticancer immunity steps. INHBA expression was positively correlated with the type markers of CD8+ T cells, neutrophils, macrophages, and dendritic cells. INHBA has a weak significant methylation level change between tumor and normal tissues and mainly enriched in cancer-related signaling pathways. The present study implies that INHBA may serve as a potential biomarker for predicting the prognosis of patients with GC. INHBA is a promising predictor of immunotherapy response, with higher levels of INHBA indicating greater sensitivity. [ABSTRACT FROM AUTHOR]

Generation of stable gene-edited plant lines using clustered regularly interspaced short palindromic repeats (CRISPR)–CRISPR-associated protein 9 (Cas9) requires a lengthy process of outcrossing to eliminate CRISPR–Cas9-associated sequences and produce transgene-free lines. We have addressed this issue by designing fusions of Cas9 and guide RNA transcripts to tRNA-like sequence motifs that move RNAs from transgenic rootstocks to grafted wild-type shoots (scions) and achieve heritable gene editing, as demonstrated in wild-type Arabidopsis thaliana and Brassica rapa. The graft-mobile gene editing system enables the production of transgene-free offspring in one generation without the need for transgene elimination, culture recovery and selection, or use of viral editing vectors. We anticipate that using graft-mobile editing systems for transgene-free plant production may be applied to a wide range of breeding programs and crop plants. Gene-edited plants free of CRISPR-associated sequences are generated by grafting. [ABSTRACT FROM AUTHOR]

Double-sided lapping process with fixed abrasive shows a strong capability of achieving high efficiency and high surface quality due to its controllable movement of the abrasive and determined material removal modes, and it can be as an alternative technology for fabricating ultra-precision optical components. However, the formation and evolution of the surface topography and roughness (Ra) were rarely clarified in the previous research due to the complicity of the double-sided lapping process. This paper established a new mathematical analytical model to provide a better scientific understanding of the formation and evolution of the surface topography and roughness, in which the spatial location and protrusion height of abrasive particles, each abrasive-material interaction, kinematics trajectory of abrasive particles, and force balance on the workpiece were considered. A series of lapping experiments on the Y3Al5O12 (YAG) wafer were conducted to verify the feasibility of the proposed model and analyze the influence of processing parameters on surface topography and roughness evolution. The results indicated that the proposed analytical model can be effectively used to predict surface topography and optimize the process parameters of double-sided planetary lapping for better surface roughness. The variation of processing time and rotational speed of the lapping plate (pad) possesses a significant influence on surface topography and Ra values. Better surface Ra values can be achieved by selecting the proper processing time and rotational speed of the lapping plate. [ABSTRACT FROM AUTHOR]

High-concentration organic wastewater has become a great challenge for wastewater treatment due to its toxicity and non-biodegradability. Traditional water treatment methods focus on removing or destroying organic pollutants rather than considering the high-concentration organic wastewater as a resource. As an ambitious sustainability goal, resource recovery from wastewater to achieve zero liquid discharge (ZLD) has attracted widespread attention. Here, a hydrate-based method is proposed to treat textile wastewater to facilitate the reuse of dyes and enhance water reclamation. The mechanism of interaction between hydrate and organic pollutants was invested. The results show that organic pollutants are rejected from the growing hydrate lattice and concentrated in the residual solution. This method can achieve a max removal efficiency of 93.6% and a water production rate of 80%. In the range of 0–2000 mg/L, the concentration of organic pollutants does not affect the removal effect and water production rate. The concentrated dye can be reused again. The proposed method exhibits potential for recovering resource and clean water from wastewater while achieving ZLD. [ABSTRACT FROM AUTHOR]

The discovery and application of genome editing introduced a new era of plant breeding by giving researchers efficient tools for the precise engineering of crop genomes1. Here we demonstrate the power of genome editing for engineering broad-spectrum disease resistance in rice (Oryza sativa). We first isolated a lesion mimic mutant (LMM) from a mutagenized rice population. We then demonstrated that a 29-base-pair deletion in a gene we named RESISTANCE TO BLAST1 (RBL1) caused broad-spectrum disease resistance and showed that this mutation caused an approximately 20-fold reduction in yield. RBL1 encodes a cytidine diphosphate diacylglycerol synthase that is required for phospholipid biosynthesis2. Mutation of RBL1 results in reduced levels of phosphatidylinositol and its derivative phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P2). In rice, PtdIns(4,5)P2 is enriched in cellular structures that are specifically associated with effector secretion and fungal infection, suggesting that it has a role as a disease-susceptibility factor3. By using targeted genome editing, we obtained an allele of RBL1, named RBL1Δ12, which confers broad-spectrum disease resistance but does not decrease yield in a model rice variety, as assessed in small-scale field trials. Our study has demonstrated the benefits of editing an LMM gene, a strategy relevant to diverse LMM genes and crops.Editing of a rice gene that has a role in phospholipid synthesis has endowed rice plants with broad-spectrum resistance to disease, including protection from common bacterial and fungal pathogens, without decreasing the yield. [ABSTRACT FROM AUTHOR]

Automatic modulation classification plays a critical role in the intelligent reception of unknown wireless signals. In practice, the dynamic wireless environment brings a great challenge, and the actual test model is inconsistent with the training model. Therefore, aiming at the problem of noise mismatch, this paper proposes a new modulation classification method based on KD-GoogLeNet and Squeeze-Excitation (KD-GSENet). Using the k-dimensional tree, the complex wireless signals are converted into color images rather than normal constellations, which can enhance the classification features. Considering the attention block has the inherent advantage of assigning more weights to important features, this paper further uses it to improve the GoogLeNet. Finally, extensive experiments are presented including Gaussian noise, non-Gaussian noise, and the scenarios of noise mismatch. Numerical results verify the superior classification performance of the proposed KD-GSENet under different scenarios. [ABSTRACT FROM AUTHOR]

ZnAl/epoxy resin (ZnAl/EP) composite coating with a thickness of 30.5 μm was prepared on bonded NdFeB magnetic ring. The morphologies and composition of ZnAl-EP/NdFeB were characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). The surface roughness of samples was measured by 3D Laser Confocal Scanning Microscope (LCSM). The samples of prepared EP/NdFeB and ZnAl-EP/NdFeB were used for corrosion tests in potentiodynamic polarization method, electrochemical impedance spectroscopy (EIS) and neutral salt spray (NSS) test. The magnetic properties of samples were measured with a permanent magnet material measuring instrument. The corrosion current density (Jcorr) of ZnAl-EP/NdFeB is 1 order of magnitude lower than that of EP/NdFeB, reflecting the corrosion resistance of ZnAl-EP/NdFeB is much higher in contrast with the EP/NdFeB. Compared with the EP/NdFeB, the NSS test time of ZnAl-EP/NdFeB is increased from 72 to 936 h. In addition, the ZnAl-EP coating has no significant effect on the magnetic properties of NdFeB magnetic ring. [ABSTRACT FROM AUTHOR]

Accurate and efficient methods for identifying and tracking each animal in a group are needed to study complex behaviors and social interactions. Traditional tracking methods (e.g., marking each animal with dye or surgically implanting microchips) can be invasive and may have an impact on the social behavior being measured. To overcome these shortcomings, video-based methods for tracking unmarked animals, such as fruit flies and zebrafish, have been developed. However, tracking individual mice in a group remains a challenging problem because of their flexible body and complicated interaction patterns. In this study, we report the development of a multi-object tracker for mice that uses the Faster region-based convolutional neural network (R-CNN) deep learning algorithm with geometric transformations in combination with multi-camera/multi-image fusion technology. The system successfully tracked every individual in groups of unmarked mice and was applied to investigate chasing behavior. The proposed system constitutes a step forward in the noninvasive tracking of individual mice engaged in social behavior. [ABSTRACT FROM AUTHOR]

Land system intensification has substantially enhanced crop production; however, it has also created soil antibiotic pollution, undermining crop production. Here, we projected soil antibiotic pollution risks to crop production at multiple geographical scales in China and linked them to land system intensification (including arable land expansion and input increase). Our projections suggest that crop production will substantially decrease when the soil antibiotic pollution risk quotient exceeds 8.30–9.98. Land systems explain most of the variability in antibiotic pollution risks (21–66%) across spatial scales. The convex nonlinearities in tradeoffs between antibiotic pollution risk and crop production indicate that vegetable and wheat production have higher thresholds of land system intensification at which the risk–yield tradeoffs will peak than do maize and rice production. Our study suggests that land system intensification below the minimum thresholds at multiple scales is required for acceptable antibiotic pollution risks related to crop yield reduction.Crop intensification has increased agricultural production albeit with an increase in field antibiotic pollution. Here, Chen et al. project how antibiotic pollution undermines production and how intensification needs to be kept below a threshold. [ABSTRACT FROM AUTHOR]

Hepatocellular carcinoma (HCC) has a desmoplastic and hypoxic tumor microenvironment (TME), resulting in poor prognosis and treatment resistance. This study aimed to construct a novel prognostic classifier to investigate the degree of hypoxia and immune profiles in HCC. Patients with HCC from public databases were classified into three HIF-1α clusters according to 16 reported HIF-1α-related genes. Then, an HIF-1α score system was constructed based on nine overlapping differentially expressed genes (ODEGs) among various HIF-1α clusters. Then, an HIF-1α score system was constructed based on nine overlapping differentially expressed genes (ODEGs) among various HIF-1α cluster. Besides, oncologic pathways and immune infiltration profiles were also investigated among HCCs with different HIF-1α scores. The reliable predictive abilities of the HIF-1α score system for patients' survival were impressively suggested by the significant C-indexes and ROC analysis. All enrolled tumors were divided into high-, medium-, and low-HIF-1α score groups. Compared with the other two groups, the high HIF-1α score group exhibited highest enrichment of multiple oncogenic pathways, such as TNF-α signaling via NF-кB, IL6-JAK-STAT3 signaling, mTORC1 signaling, MYC signaling, Hedgehog signaling. Notably, higher HIF-1α scores correlated with advanced immunosuppressive TME. Besides, tumors with high HIF-1α scores represented high non-response rate to transcatheter arterial chemoembolization (TACE) and immune checkpoint blockade (ICB). In conclusion, we developed a novel HIF-1α score system to distinguish HCC with different degree of hypoxia and immune infiltration profiles. [ABSTRACT FROM AUTHOR]

An in-depth understanding of the anisotropic characteristics of shale is the basis for improving the production capability of shale gas. Therefore, the cracking behavior of shales under compression and tension was investigated experimentally from macroscopic and microscopic perspectives. Uniaxial compression tests were carried out, and the effects of bedding on the generation of microcracks were analyzed through nuclear magnetic resonance (NMR). Then, Brazilian splitting and confocal laser scanning microscopy (CLSM) tests were performed, and the corresponding relationship between the failure mode and the fracture surface morphology was discussed. The results reveal that the mechanical properties and failure modes of shales are affected significantly by the existence of bedding planes. The total volume and size of microflaws after failure increase, and the highest porosity of newly generated microcracks is that of the 0° specimen. The microflaws are classified into two categories, including capillary and seepage microflaws. The newly generated microflaws in the 0°, 30°, and 90° specimens are mainly due to seepage microflaws, while those in the 60° specimen are mainly due to capillary microflaws. In the Brazilian splitting test, the fracture surface morphology of the specimen is closely related to the failure mode and mechanism. [ABSTRACT FROM AUTHOR]

We construct a sovereign default network by employing high-dimensional vector autoregressions obtained by analyzing connectedness in sovereign credit default swap markets. We develop four measures of centrality, namely, degree, betweenness, closeness, and eigenvector centralities, to detect whether network properties drive the currency risk premia. We observe that closeness and betweenness centralities can negatively drive currency excess returns but do not exhibit a relationship with forward spread. Thus, our developed network centralities are independent of an unconditional carry trade risk factor. Based on our findings, we develop a trading strategy by taking a long position on peripheral countries' currencies and a short position on core countries' currencies. The aforementioned strategy generates a higher Sharpe ratio than the currency momentum strategy. Our proposed strategy is robust to foreign exchange regimes and the coronavirus disease 2019 pandemic. [ABSTRACT FROM AUTHOR]

In this work, near-infrared light responsive upconversion nanoparticles TiO2/(Ca,Y)F2:Tm,Yb were hydrothermally prepared for tumor control. Moreover, femtosecond laser was adopted to reduce particle size and aggregation of TiO2/(Ca,Y)F2:Tm,Yb, as a strategy to enhance its dispersity. In vitro studies of the biocompatibility and tumor control efficacy of TiO2/(Ca,Y)F2:Tm,Yb were carried out via co-culturing human pancreatic carcinoma cells (CFPAC-1). It was found in the absence of near-infrared light, TiO2/(Ca,Y)F2:Tm,Yb showed no toxicity to CFPAC-1 cells. On contrast, when exposed to near-infrared light, particles exhibited irradiation time, irradiation interval and particle concentration dependent suppression of CFPAC-1 cells proliferation along with portion of S phase cells increase. A nude mouse model with CFPAC-1 cells injection was established and TiO2/(Ca,Y)F2:Tm,Yb was subsequently applied for in vivo tumor control. A 15 days tracking confirmed the antitumor capability of near-infrared light excited TiO2/(Ca,Y)F2:Tm,Yb. Overall, we anticipate that the here-introduced TiO2/(Ca,Y)F2:Tm,Yb can serve as an effective agent for photodynamic antitumor therapy. [ABSTRACT FROM AUTHOR]

Serine proteases (SPs) and their homologs (SPHs) are among the best-characterized gene families. They are involved in several physiological processes, including digestion, embryonic development and immunity. In the current study, a total of 177 SPs-related genes were characterized in the genome of Ostrinia furnacalis. The activation site of SPs/SPHs and enzyme specificity of SPs were identified, and the findings showed that most of the SPs analyzed possessed trypsin substrate specificity. Several SPs/SPHs with similar simple gene structures had tandem repeat-like distributions on the scaffold, indicated that gene expansion has occurred in this large family. Furthermore, we constructed 30 RNA sequencing libraries including four with developmental stage and four middle larval stage tissues to study the transcript levels of these genes. Differentially upregulated and downregulated genes were obtained via data analysis. More than one-quarter of the genes were specifically identified as highly expressed in the midgut in compared to the other three tissues evaluated. In the current study, the domain structure, gene location and phylogenetic relationship of genes in O. furnacalis were explored. Orthologous comparisons of SPs/SPHs between model insects and O. furnacalis indicated their possible functions. This information provides a basis for understanding the functional roles of this large family. [ABSTRACT FROM AUTHOR]

Major historical events often trigger the rapid flourishing of a few lineages, which in turn shape established biodiversity patterns. How did this process occur and develop? This study provides a window into this issue. The endemic East Asian carps (EEAC) dominated the ichthyofauna of East Asia and exhibited a high degree of adaptation to monsoonal river-lake ecosystems. A series of evidence, including ecogeography, phylogenetics, and macroevolution, suggests that the EEAC is a lineage that arose with the East Asian monsoon and thrived intimately with subsequent monsoon activities. We further deduce the evolution of the EEAC and find that a range of historical events in the monsoon setting (e.g., marine transgression and regression and glacial-interglacial cycle) have further reshaped the distribution patterns of EEAC's members. Comparative genomics analyses reveal that introgressions during the initial period of EEAC radiation and innovations in the regulation of the brain and nervous system may have aided their adaptation to river-lake ecosystems in a monsoon setting, which boosted radiation. Overall, this study strengthens knowledge of the evolutionary patterns of freshwater fishes in East Asia and provides a model case for understanding the impact of major historical events on the evolution of biota. [ABSTRACT FROM AUTHOR]

With the expansion of database, the complexity of concept lattices grows rapidly. Therefore, the compression of formal concepts becomes particularly important. To solve this problem, we present neighborhood based concept lattice. Firstly, two pairs of approximation operators are presented to construct 1-neighborhood object-induced concept lattice and 1-neighborhood attribute-induced concept lattice. Then, the pseudo similarity between objects and the pseudo similarity between attributes are introduced. 1-neighborhood object-induced concept lattice based on coverings and 1-neighborhood attribute-induced concept lattice based on coverings are proposed based on pseudo similarities. The neighborhoods are adjusted by the pseudo similarity, and the number of the neighborhood based concepts can be compressed. Besides, the relationship between neighborhood based concept lattice and Wille's concept lattice is discussed. We prove that the intents of 1-neighborhood object-induced concepts based on minimal (resp. maximal) intersection neighborhood are the intents of Wille's formal concepts. Meanwhile, the extents of 1-neighborhood attribute-induced concepts based on minimal (resp. maximal) intersection neighborhood are the extents of Wille's formal concepts. In addition, the multi-neighborhood concept lattice is presented, the relationship between 1-neighborhood concept lattice and multi-neighborhood concept lattice is discussed. Finally, the experimental results show that the compressing of neighborhood based concept lattice is more effective when parameter values are smaller. [ABSTRACT FROM AUTHOR]