Search

The drawbacks of common anodes in lithium-ion batteries (LIBs) and hybrid supercapacitors (HSCs), such as the high voltage plateau of Li4Ti5O12 (1.55 V vs. Li/Li+) and the moderate capacity of graphite (372 mAh-g-1), have established a need for better materials. Conversion materials, and in particular iron oxide and CaFe2O4 (CFO), have amassed recent attention as potential anode replacements. In this study, we evaluate the material and electrochemical effects of the solution combustion synthesis (SCS) of porous CFO across novel fuel-to-oxidizer ratios and calcination temperatures. We demonstrate that nearly doubling the amount of fuel used during synthesis increases capacities between 120 and 150% at high current densities (~ 1000 mA-g-1) and across 500 additional charging-discharging cycles, an effect brought on in part by enhanced compositional purity in these samples. However, in order to ensure long-term cyclic stability, it is necessary to also calcine porous CFO to 900 °C to enhance crystallite size, particle size and spacing, and compositional purity. [ABSTRACT FROM AUTHOR]

One of the ways to mitigate the world energy crisis is to harvest clean and green energy from waste-heat, which is abundant, ubiquitous, and free. Energy harvesting of this waste-heat is one of the most encouraging methods to capture freely accessible electrical energy. Ferroelectric materials can be used to harvest energy for low power electronic devices, as they exhibit switchable polarization, excellent piezoelectric and pyroelectric properties. The most important characteristic of ferroelectric materials, in the context of energy harvesting, is their ability to generate electric power from a time-dependent temperature change. In this work, we grew highly c-axis oriented heterostructures of BaZr0.2Ti0.8O3 (barium zirconium titanate, BZT)/Ba0.7Ca0.3TiO3 (barium calcium titanate, BCT) on SrRuO3 (strontium ruthenate, SRO) and deposited on SrTiO3 (strontium titanate, STO) single crystalline substrate using pulsed laser deposition (PLD) technique. We investigated the structural, electrical, dielectric, and pyroelectric properties of the above-mentioned fabricated heterostructures. The wide range of θ–2θ X-ray diffraction (XRD) patterns only shows (00l) reflection peaks of heterostructures and the substrate which confirmed that the films are highly c-axis oriented. We are also capable to convert the low-grade waste-heat into electrical energy by measuring various temperature-dependent ferroelectric hysteresis loops of our nanostructure films via pyroelectric Ericsson cycles and the structures show an energy conversion density ~ 10,970 kJ/m3 per cycle. These devices exhibit a large pyroelectric current density of ~ 25 mA/m2 with 11.8 °C of temperature fluctuation and the corresponding pyroelectric coefficient of 3425 μC/m2K. Our research findings suggest that these lead-free relaxor-ferroelectric heterostructures might be the potential candidates to harvest electrical energy from waste low-grade thermal energy. [ABSTRACT FROM AUTHOR]

Combining two materials in a nanoscale level can create a composite with new functionalities and improvements in their physical and chemical properties. Here we present a high-throughput approach to produce a nanocomposite consisting of metal nanoparticles and semiconductor oxide nanostructures. Volmer-Weber growth, though unfavorable for thin films, promotes nucleation of dense and isolated metal nanoparticles on crystalline oxide nanostructures, resulting in new material properties. We demonstrate such a growth of Au nanoparticles on SnO2 nanostructures and a remarkable sensitivity of the nanocomposite for detecting traces of analytes in surface enhanced Raman spectroscopy. Au nanoparticles with tunable size enable us to modify surface wettability and convert hydrophilic oxide surfaces into super-hydrophobic with contact angles over 150°. We also find that charge injection through electron beam exposure shows the same effect as photo-induced charge separation, providing an extra Raman enhancement up to an order of magnitude. [ABSTRACT FROM AUTHOR]

The metal-to-insulator transition (MIT) closest to room temperature of 68–70 °C as shown by vanadium oxide (VO2), compared with other transition metal oxides, makes it a potential candidate for smart window coating. We have successfully fabricated a potential smart window device after the optimum design of a multilayered thin film structure made out of transparent conducting oxide (aluminum doped zinc oxide) and pure VO2 using pulsed laser deposition technique. This comprehensive study is based on two different configurations for multi-layered structure approach, with the intention to reduce the transition temperature, as well as to maintain the MIT properties that would strengthen the potential of the structure to be used for a smart window device. By creating a multi-layered structure, we were able to create a low powered device that can operate less than 15 V that leads to significant decline in the infrared transmission by a magnitude of over 40% and provided sufficient heat to trigger the MIT at a temperature around 60 °C, which is almost 10 °C lower than its bulk counterpart. This finding would positively impact the research on VO2 thin films, not only as smart windows but also for numerous other applications like bolometers, infrared detectors, Mott transistors and many more. [ABSTRACT FROM AUTHOR]

Large area highly crystalline MoS2 and WS2 thin films were successfully grown on different substrates using radio-frequency magnetron sputtering technique. Structural, morphological and thermoelectric transport properties of MoS2, and WS2 thin films have been investigated systematically to fabricate high-efficient thermal energy harvesting devices. X-ray diffraction data revealed that crystallites of MoS2 and WS2 films are highly oriented in 002 plane with uniform grain size distribution confirmed through atomic force microscopy study. Surface roughness increases with substrate temperature and it plays a big role in electron and phonon scattering. Interestingly, MoS2 films also display low thermal conductivity at room temperature and strongly favors achievement of higher thermoelectric figure of merit value of up to 1.98. Raman spectroscopy data shows two distinct MoS2 vibrational modes at 380 cm−1 for E12g and 410 cm−1 for A1g. Thermoelectric transport studies further demonstrated that MoS2 films show p-type thermoelectric characteristics, while WS2 is an n-type material. We demonstrated high efficient pn-junction thermoelectric generator device for waste heat recovery and cooling applications. [ABSTRACT FROM AUTHOR]

We report the electrothermal properties of AAA trilayer on polyethylene terephthalate substrate which allowed the development of low-cost high-performance transparent thin-film flexible heater (TTFFH) using RF magnetron sputtering. The structural, electrical, and optical properties of the AAA trilayer were investigated at different thickness of the Ag interlayer. The AAA trilayer-based TTFFH yielded saturation temperatures beyond 100 °C at 10 V at optimized Ag interlayer thickness of 5 nm. The time-dependent temperature profile along with its highly stable and reversible thermal behavior was studied. Most importantly, the AAA trilayer-based TTFFH provides a high-performance alternative to the conventional and expensive ITO electrodes at a much lower cost. [ABSTRACT FROM AUTHOR]

An amendment to this paper has been published and can be accessed via a link at the top of the paper. [ABSTRACT FROM AUTHOR]

Artificial and engineered nanostructures expand the degrees of freedom with which one can manipulate the intricate interplay of light and matter. Certain nanostructural arrangements in the excited state enable the efficient electromagnetic coupling of propagating light with localized fields. Here, we demonstrate that light transmitted through a nanostructured metal thin film without any apertures can be significantly enhanced. Distinct asymmetric Fano resonances are observed in the zero-order transmission spectra using an incoherent light source. The transmission efficiency surpasses that of a metal thin film with the same area and thickness at the resonance maxima. The transmission minima and the sharp resonance maxima bear a strong resemblance to the extraordinary optical transmission observed in sub-wavelength nanohole array structures The resonance wavelength closely matches the nanostructural periodicity. The sensitivity of the resonances to the surrounding medium and the transmission efficiency demonstrate the potential for use in energy harvesting, imaging, optical processing and sensing applications. [ABSTRACT FROM AUTHOR]