Search

The main focus of this review is to illustrate the amenability of self-assembled monolayers (SAMs) for functionalisation with different receptors, catalytic materials, biomolecules, enzymes, antigen-antibody, etc for various applications. The review discusses initially about the preparation and characterization of SAMs and tailoring of SAMs by incorporation of suitable recognition elements. A description of how the molecular recognition is achieved through forces like electrostatic, covalent and host-guest interactions is included in the review.

We report here the synthesis of palladium (Pd) nanoparticles incorporated poly-(3,4)ethylenedioxythiophene (PEDOT) matrix in aqueous medium and its catalytic performance towards 4-nitrophenol reduction. This simple one-pot synthesis involving a redox reaction between 3,4-ethylenedioxythiophene and palladium chloride (PdCl2) precursor, leads to the formation of Pd nanoparticles supported on particulate PEDOT. Pd nanoparticles of size 1–9 nm were found to distribute uniformly over the PEDOT matrix. Morphology of the Pd–PEDOT nanocomposite was characterized by field emission-scanning electron microscopy and transmission electron microscopy and the crystallographic details obtained using X-ray diffraction. The chemical nature of the PEDOT support matrix was analyzed using Fourier transform-infra red (FT-IR) spectroscopy. The catalytic activity of the composite was demonstrated using a model reaction, i.e., reduction of 4-nitrophenol to 4-aminophenol. The value of the apparent rate constant, ca. 65.8 × 10−3 s−1 obtained using UV visible spectroscopy of the reduction of 4-nitrophenol at the Pd–PEDOT nanocomposite is comparable to those reported for other catalytic systems.

Palladium (Pd) incorporated poly (3,4-ethylenedioxythiophene) (PEDOT) films were synthesized through an electrochemical route and characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The electrochemical study showed catalytic oxidation of dopamine (DA) with optimum loading of Pd. DA and uric acid (UA) were detected using differential pulse voltammetry (DPV). In the presence of ascorbic acid (AA), DA-AA showed peak potential separation of 0.19 V while 0.32 V between UA-AA on Pd-incorporated PEDOT. These peak separations are large enough for sensing DA and UA in the presence of AA. DA and UA exhibited linear calibration plots and the minimum detection limits are 0.5 and 7 µM respectively. On Pd-PEDOT, the reversibility of DA oxidation was found to increase compared to bare glassy carbon electrode (GCE) and PEDOT modified GCE. Fouling effects were also found to be minimal making Pd-PEDOT composite suitable for electroanalysis.

In this communication, we report a strategy for the preparation of Pt nanoparticles encapsulated in Generation 4.5 (Polyamido amine) PAMAM dendrimer and subsequent chemical linking of the nanocomposite to the gold electrode through a self assembled cystamine monolayer. The modification resulted in the formation of a robust electrochemically active thin film with very high surface area, reflected by the enhanced hydrogen adsorption coverage. Interestingly, TEM images revealed self-assembly of Pt nanoparticles and the SAED (Selected Area Electron Diffraction) patterns showed the presence of Pt single crystals (111). The Pt-dendrimer nanocomposite film obtained using the novel modification procedure exhibited high electrocatalytic activity for the oxidation of organic fuels like methanol, ethanol and ethylene glycol. The film did not suffer from degradation even after repeated use in solution-phase voltammetry. It is however observed that the intermediate SAM layer and the bulky PAMAM dendrimer (generation 4.5) have slowed down the electron transfer kinetics which is reflected by a relatively high overpotential for methanol oxidation. Nevertheless this shortcoming is more than compensated by the existence of Pt(111) planes, which alleviate CO poisoning.

There is a growing interest in devising wet chemical alternatives for physical deposition methods for applications involving thin films, e.g., catalysis. Deposition of platinum on thin gold films is often a problem leading to incomplete coverage and improper adhesion to solid surfaces. Gold substrates often need pre-activation for achieving complete coverage. We demonstrate here that dendrimers with proper functionalities and size work as well-defined nucleating agents and adhesion promoters. This feature is demonstrated using an amine-terminated dendrimer of generation 4.0. This approach allows one to obtain adherent nanoparticulate films of platinum on gold. Unlike other nucleating agents and adhesion promoting compounds, dendrimers have a well-defined ordered structure in terms of their space filling ability. The stability of the films obtained with adsorbed dendrimers is demonstrated using the electrocatalytic reactions of fuels like methanol. The films formed without dendrimers cannot sustain the electro-oxidation currents due to the instability of the films while the films formed with dendrimers can sustain currents for longer duration and for several cycles. The dendrimer-derived Pt films exhibit higher catalytic activity compared to other methods

Detection of dopamine (DA) in the presence of excess of ascorbic acid (AA) has been demonstrated using a conducting polymer matrix, poly (3,4-ethylenedioxythiophene) (PEDOT) film in neutral buffer (PBS 7.4) solution. The PEDOT film was deposited on a glassy carbon electrode by electropolymerization of EDOT from acetonitrile solution. Atomic force microscopy studies revealed that the electrodeposited film was found to be approximately 100 nm thick with a roughness factor of 2.6 nm. Voltammetric studies have shown catalytic oxidation of DA and AA on PEDOT modified electrode and can afford a peak potential separation of ∼0.2 V. It is speculated that the cationic PEDOT film interacts with the negatively charged ascorbate anion through favorable electrostatic interaction, which results in pre-concentration at a less anodic value. The positively charged DA tends to interact with the hydrophobic regions of PEDOT film through hydrophobic–hydrophobic interaction thus resulting in favorable adsorption on the polymer matrix. Further enhancement in sensitivity to micro molar level oxidation current for DA/AA oxidation was achieved by square wave voltammetry (SWV) which can detect DA at its low concentration of 1 μM in the presence of 1000 times higher concentration of AA (1 mM). Thus the PEDOT modified electrode exhibited a stable and sensitive response to DA in the presence of AA interference.

Self-assembled monolayers (SAMs) of thiols with carboxylic acid terminal groups were formed on gold substrates. The electron transfer characteristics of redox species on the above SAM-modified electrodes were studied in acid and neutral media with the help of voltammetry under two different conditions: (1) solution phase electron transfer and (2) bridge mediated electron transfer. Two redox systems, viz., [Fe(CN)6]4-/3− and Ru[(NH3)6]2+/3+ were chosen for the solution phase study. Investigations of bridge mediated electron transfer were carried out by functionalising the SAM with redox moieties and then studying their redox behaviour. For this study, ferrocene carboxylic acid and 1,4-diamino anthraquinone were used and they were linked to carboxylic acid terminated thiols by covalent linkage. The voltammetric results with mercaptoundecanoic acid SAM demonstrate the difference in behaviour between solution phase and bridge mediated electron transfer processes.

The behaviour of a poly (aniline boronic acid) (PABA) modified glassy carbon electrode (GCE) for the detection of dopamine (DA) in the presence of excess of ascorbic acid (AA) using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques is investigated. On bare GCE, both DA and AA are oxidized at ~0.16 V, whereas on PABA modified GCE they are oxidized at 0.2 and 0.054 V, respectively. Though PABA favours DA oxidation through ester formation with boronic acid motif, the AA oxidation is also promoted by polyaniline backbone through the involvement of AA in the redox of polyaniline. Since both DA and AA undergo oxidation at closely spaced potentials at a PABA electrode, Nafion®-incorporation into the PABA film was examined for selective determination of DA in the presence of AA. The selectivity was due to accumulation of DA on the electrode surface through ester formation with the boronic acid group and suppression of AA oxidative current through charge discrimination by Nafion.

In this paper, the electrochemical current rectification phenomenon exhibited at an electrochemical interface constituted by a glassy carbon electrode covered with a bilayer of polymer films is discussed. The authors have shown that Methylene Blue (MB) redox species can be confined to a very thin insulating polymer film formed from orthophenylene diamine. The poly(opd) film exhibited excellent blocking properties to redox molecules in solution. On the other hand, the insulating poly(opd) film trapped with MB could mediate electron transfer between the redox molecules in solution and the electrode. Further, a second polymeric layer (Nafion film) trapped with ferrocene redox species was formed as the outer layer over the inner poly (opd) film containing MB. This bilayer-modified electrode, due to the significant difference in the redox potentials of the MB and ferrocene species immobilized in the inner and outer layers, respectively, exhibits unidirectional current flow and the results of the voltammetric investigations on the modified electrodes are described in this communication.

In this work, we examine the electrocatalytic activity of electrodeposited Platinum (Pt)-Nickel (Ni) alloy layers on an inert substrate electrode for methanol oxidation reaction. Analyses using energy-dispersive fluorescent X-ray analysis and powder X-ray diffractometry confirm alloying of Pt with Ni in a range of compositions. Steady-state polarisation measurements in 0.5 M methanol+0.5 M H2SO4 solutions clearly show that the onset of electro-oxidation shifts to less anodic potential values (approximately 160 mV), while also exhibiting current enhancements up to ~15 times the currents obtained for the pure Pt electrodeposit. A linear relationship between the cyclic voltammetric peak (oxidation) current and [MeOH] is observed at a scan rate of 50 mVs−1, thus indicating reduced influence of adsorbed CO (COads) surface poison. A critical composition, Pt (92%)/Ni (8%) [denoted Pt-Ni(3) alloy] is found to exhibit maximum electrocatalytic activity, beyond which the activity drops, whereas pure Ni does not catalyse the reaction. While the promotion of electro-oxidation is understood to be largely due to the alloy catalyst, surface redox species of Ni oxide formed during the electro-oxidation process may also contribute to the oxygenation of COads, thereby enhancing the oxidation current. Plausible mechanisms of methanol oxidation on Pt/ transition metal alloy electrocatalysts are discussed in terms of electron transfer (in the alloy) and the role of Ni oxide species.

Electrochemical studies on gold electrodes covered with self-assembled monolayers (SAM) of aminoethane thiol (AET), mercaptobenzothiazole (MBT) and octadecyl mercaptan (ODM) have been carried out using cyclic voltammetry. Study of the influence of these monolayers on the double layer capacity of the interfaces involving the Au/SAM electrodes and of the electron transfer kinetics of chosen redox reaction probes, viz., Fe(CN) 6 4−/3− , Fe2+/3+, hydroquinone/quinone(H2 Q/Q) and Cu underpotential deposition, offers a wealth of information that can throw light on the role of SAMs in allowing/moderating/blocking the electron transfer at such interfaces. These details are presented and discussed in the paper.

Electrochemical reactions occur at electrode/electrolyte interfaces. Hence, manipulation and design of electrochemical interfaces accompanied by surface modifications have assumed vital importance. Molecular level modification, either at the monolayer or multilayer level of electrode surfaces and leading to functionalization of electrodes, is being actively pursued by researchers. Modification based on the self-assembled monolayer approach has enabled electrodes to acquire molecular recognition and molecular electronic characteristics. Functionalization of electrode surfaces using polymeric materials and enzymes has facilitated electrodes in exhibiting properties like catalysis, molecular recognition, electrochromism and birefringence. The results of such molecular level functionalization studies of electrode surfaces carried out recently in our laboratories are presented in this overview. Besides, some representative results reported from elsewhere are also included.

Simultaneous underpotential deposition of lead and thallium from a tartrate medium on a polycrystalline silver electrode is reported. Results of cyclic voltammetric investigations of the effects of concentration and sweep rate on the codeposition behaviour are discussed. Further investigations of the codeposition behaviour through voltammetric experiments using programmed potential inputs are described and discussed in terms of formation of a two-dimensional alloy. Finally, the validity of the existing models of electrochemical phase formation has been investigated under the codeposition conditions.

The formation and characterization of self-assembled monolayers of organosulfur compounds like alkanethiols and dialkyl (di)sulfides on metal surfaces such as gold are areas of current research interest. The presence of an aromatic ring in a thiol molecule can enhance the binding between Au and the thiol, resulting in the formation of compact and impervious self-assembled monolayers. The formation of a monolayer of 2-mercaptobenzothiazole (MBT), containing an aromatic group with a fused thiazole ring but no long alkyl chain, is achieved on a gold electrode surface. Voltammetric investigations of ferro/ferricyanide and ferrous/ferric redox systems carried out on this Au|MBT electrode are reported. Further, the possibility of using such an Au|MBT electrode to distinguish between inner and outer sphere electron transfer reactions is indicated.

In this work, gold-incorporated polyethylenedioxythiophene nanocomposite material has been synthesized chemically, employing reverse emulsion polymerization method. Infrared and Raman spectroscopic studies revealed that the polymerization of ethylenedioxythiophene leads to the formation of polymer polyethylenedioxythiophene incorporating gold nanoparticles. Scanning electron microscope studies showed the formation of polymer nanorods of 50–100 nm diameter and the X-ray diffraction analysis clearly indicates the presence of gold nanoparticles of 50 nm in size.

Results on the simulated η-t transient response of an ‘actively’ corroding system under accelerated Tafel plot (ATP) conditions have revealed the influence of input parameters (Δi, τ) and system parameters (C dl,i corr andb) and explained the observed dependence of kinetic parameters (arrived at on the basis of the intercept-slope method) on τ in certain time domains. New improved methods, which eliminate such dependence and give uniform corrosion rate data over all time domains, are described in the paper.