Search

Downy mildew of cucumber caused by the oomycete Pseudoperonospora cubensis (P. cubensis) is currently the most destructive disease of this crop, causing high yield losses. Visual evaluation by experts is the most established method for the detection of P. cubensis infection, but depends on visual disease symptoms. Detection of fungal infection before visual symptoms appear is highly desirable, allowing to deploy disease control measures before extensive crop damage occurs. The capacity of remote sensing approaches, such as hyperspectral imaging or high-resolution spectrometry, have proved to be powerful tools for detecting plant fungal diseases at pre-symptomatic stages over the last years. However, these approaches are expensive and processing the massive amount of multidimensional data, in case of spectroscopy and hyperspectral imaging, remains complex. Affordable, easy to handle, devices enabling the identification of P. cubensis infected cucumber plants at the pre-symptomatic stage in-situ may represent a high-value alternative for farmers. This study compared the performance of a high-cost high-resolution spectroradiometer (FieldSpec4) and a lower-cost leaf-clip sensor (DUALEX) for the early detection of P. cubensis infection in cucumber. Screening of cucumber plants, grown in a growth chamber, 24 h and 48 h post inoculation, allowed to identify a subset of spectral bands and leaf pigments for differentiating between infected and healthy cucumber plants at the pre-symptomatic stage. In the case of the FieldSpec 4, models based on spectral bands at 402, 576, 690, 708, and 723 nm differentiated between cucumber plants infected with P. cubensis and healthy plants with a F1 value of 0.67. The use of the lower-cost leaf-clip DUALEX sensor differentiated between infected and healthy cucumber plants with a F1 value of 0.60. Furthermore, the epidermal flavonol content obtained with the + leaf-clip DUALEX sensor was shown to be decreased in cucumber plants infected with

An acceleration of the genetic advances of durum wheat, as a major crop for the Mediterranean region, is required, but phenotyping still represents a bottleneck for breeding. This study aims to define durum wheat ideotypes under Mediterranean conditions by selecting the most suitable phenotypic remote sensing traits among different ones informing on characteristics related with leaf pigments/photosynthetic status, crop water status, and crop growth/green biomass. A set of 24 post-green revolution durum wheat cultivars were assessed in a wide set of 19 environments, accounted as the specific combinations of a range of latitudes in Spain, under different management conditions (water regimes and planting dates), through 3 consecutive years. Thus, red-green-blue and multispectral derived vegetation indices and canopy temperature were evaluated at anthesis and grain filling. The potential of the assessed remote sensing parameters alone and all combined as grain yield (GY) predictors was evaluated through random forest regression models performed for each environment and phenological stage. Biomass and plot greenness indicators consistently proved to be reliable GY predictors in all of the environments tested for both phenological stages. For the lowest-yielding environment, the contribution of water status measurements was higher during anthesis, whereas, for the highest-yielding environments, better predictions were reported during grain filling. Remote sensing traits measured during the grain filling and informing on pigment content and photosynthetic capacity were highlighted under the environments with warmer conditions, as the late-planting treatments. Overall, canopy greenness indicators were reported as the highest correlated traits for most of the environments and regardless of the phenological moment assessed. The addition of carbon isotope composition of mature kernels was attempted to increase the accuracies, but only a few were slightly benefited, as differen

Wheat grain quality characteristics have experienced increasing attention as a central factor affecting wheat end-use products quality and human health. Nonetheless, in the last decades a reduction in grain quality has been observed. Therefore, it is central to develop efficient quality-related phenotyping tools. In this sense, one of the most relevant wheat features related to grain quality traits is grain nitrogen content, which is directly linked to grain protein content and monitorable with remote sensing approaches. Moreover, the relation between nitrogen fertilization and grain nitrogen content (protein) plays a central role in the sustainability of agriculture. Both aiming to develop efficient phenotyping tools using remote sensing instruments and to advance towards a field-level efficient and sustainable monitoring of grain nitrogen status, this paper studies the efficacy of various sensors, multispectral and visible red–greenblue (RGB), at different scales, ground and unmanned aerial vehicle (UAV), and phenological stages (anthesis and grain filling) to estimate grain nitrogen content. Linear models were calculated using vegetation indices at each sensing level, sensor type and phenological stage. Furthermore, this study explores the up-scalability of the best performing model to satellite level Sentinel-2 equivalent data. We found that models built at the phenological stage of anthesis with UAV-level multispectral cameras using red-edge bands outperformed grain nitrogen content estimation (R2 = 0.42, RMSE = 0.18%) in comparison with those models built with RGB imagery at ground and aerial level, as well as with those built with widely used ground-level multispectral sensors. We also demonstrated the possibility to use UAV-built multispectral linear models at the satellite scale to determine grain nitrogen content effectively (R2 = 0.40, RMSE = 0.29%) at actual wheat fields.

Remote detection and monitoring of the vegetation responses to stress became relevant for sustainable agriculture. Ongoing developments in optical remote sensing technologies have provided tools to increase our understanding of stress-related physiological processes. Therefore, this study aimed to provide an overview of the main spectral technologies and retrieval approaches for detecting crop stress in agriculture. Firstly, we present integrated views on: i) biotic and abiotic stress factors, the phases of stress, and respective plant responses, and ii) the affected traits, appropriate spectral domains and corresponding methods for measuring traits remotely. Secondly, representative results of a systematic literature analysis are highlighted, identifying the current status and possible future trends in stress detection and monitoring. Distinct plant responses occurring under short-term, medium-term or severe chronic stress exposure can be captured with remote sensing due to specific light interaction processes, such as absorption and scattering manifested in the reflected radiance, i.e. visible (VIS), near infrared (NIR), shortwave infrared, and emitted radiance, i.e. solar-induced fluorescence and thermal infrared (TIR). From the analysis of 96 research papers, the following trends can be observed: increasing usage of satellite and unmanned aerial vehicle data in parallel with a shift in methods from simpler parametric approaches towards more advanced physically-based and hybrid models. Most study designs were largely driven by sensor availability and practical economic reasons, leading to the common usage of VIS-NIR-TIR sensor combinations. The majority of reviewed studies compared stress proxies calculated from single-source sensor domains rather than using data in a synergistic way. We identified new ways forward as guidance for improved synergistic usage of spectral domains for stress detection: (1) combined acquisition of data from multiple sensors for analys

Remote detection and monitoring of the vegetation responses to stress became relevant for sustainable agriculture. Ongoing developments in optical remote sensing technologies have provided tools to increase our understanding of stress-related physiological processes. Therefore, this study aimed to provide an overview of the main spectral technologies and retrieval approaches for detecting crop stress in agriculture. Firstly, we present integrated views on: i) biotic and abiotic stress factors, the phases of stress, and respective plant responses, and ii) the affected traits, appropriate spectral domains and corresponding methods for measuring traits remotely. Secondly, representative results of a systematic literature analysis are highlighted, identifying the current status and possible future trends in stress detection and monitoring. Distinct plant responses occurring under short-term, medium-term or severe chronic stress exposure can be captured with remote sensing due to specific light interaction processes, such as absorption and scattering manifested in the reflected radiance, i.e. visible (VIS), near infrared (NIR), shortwave infrared, and emitted radiance, i.e. solar-induced fluorescence and thermal infrared (TIR). From the analysis of 96 research papers, the following trends can be observed: increasing usage of satellite and unmanned aerial vehicle data in parallel with a shift in methods from simpler parametric approaches towards more advanced physically-based and hybrid models. Most study designs were largely driven by sensor availability and practical economic reasons, leading to the common usage of VIS-NIR-TIR sensor combinations. The majority of reviewed studies compared stress proxies calculated from single-source sensor domains rather than using data in a synergistic way. We identified new ways forward as guidance for improved synergistic usage of spectral domains for stress detection: (1) combined acquisition of data from multiple sensors for analys

Main conclusion: By combining hyperspectral signatures of peanut and soybean, we predicted V and J with 70 and 50% accuracy. The PLS was the model that better predicted these photosynthetic parameters. Abstract: One proposed key strategy for increasing potential crop stability and yield centers on exploitation of genotypic variability in photosynthetic capacity through precise high-throughput phenotyping techniques. Photosynthetic parameters, such as the maximum rate of Rubisco catalyzed carboxylation (V) and maximum electron transport rate supporting RuBP regeneration (J), have been identified as key targets for improvement. The primary techniques for measuring these physiological parameters are very time-consuming. However, these parameters could be estimated using rapid and non-destructive leaf spectroscopy techniques. This study compared four different advanced regression models (PLS, BR, ARDR, and LASSO) to estimate V and J based on leaf reflectance spectra measured with an ASD FieldSpec4. Two leguminous species were tested under different controlled environmental conditions: (1) peanut under different water regimes at normal atmospheric conditions and (2) soybean under high [CO] and high night temperature. Model sensitivities were assessed for each crop and treatment separately and in combination to identify strengths and weaknesses of each modeling approach. Regardless of regression model, robust predictions were achieved for V (R = 0.70) and J (R = 0.50). Field spectroscopy shows promising results for estimating spatial and temporal variations in photosynthetic capacity based on leaf and canopy spectral properties.

RGB imagery has been widely used for crop management practices and phenotyping applications in recent years. Although RGB wavelengths (400-700 nm) are not able to capture all essential plant data (such as with full ultraviolet, near and long infrared wavelength coverage), RGB cameras are the most common types of cameras and are among the versatile imaging devices for proximal remote sensing applications. Deep learning strategies have improved a wide range of processes and deep learning concepts can be included in many applications. This work uses the Very Deep Super-Resolution (VDSP) technique to improve low-resolution RGB images in order to study grain yield assessment in wheat using vegetation indexes. The results show no significant differences between indexes calculated from low-resolution images and low-resolution images processed using VDSP with grain yield.

Although the relevance of spike bracts in stress acclimation and contribution to wheat yield was recently revealed, the metabolome of this organ and its response to water stress is still unknown. The metabolite profiles of flag leaves, glumes and lemmas were characterized under contrasting field water regimes in five durum wheat cultivars. Water conditions during growth were characterized through spectral vegetation indices, canopy temperature and isotope composition. Spike bracts exhibited better coordination of carbon and nitrogen metabolisms than the flag leaves in terms of photorespiration, nitrogen assimilation and respiration paths. This coordination facilitated an accumulation of organic and amino acids in spike bracts, especially under water stress. The metabolomic response to water stress also involved an accumulation of antioxidant and drought tolerance related sugars, particularly in the spikes. Furthermore, certain cell wall, respiratory and protective metabolites were associated with genotypic outperformance and yield stability. In addition, grain yield was strongly predicted by leaf and spike bracts metabolomes independently. This study supports the role of the spike as a key organ during wheat grain filling, particularly under stress conditions and provides relevant information to explore new ways to improve wheat productivity including potential biomarkers for yield prediction.

Durum wheat is an important cereal that is widely grown in the Mediterranean basin. In addition to high yield, grain quality traits are of high importance for farmers. The strong influence of climatic conditions makes the improvement of grain quality traits, like protein content, vitreousness, and test weight, a challenging task. Evaluation of quality traits post-harvest is time- and labor-intensive and requires expensive equipment, such as near-infrared spectroscopes or hyperspectral imagers. Predicting not only yield but also important quality traits in the field before harvest is of high value for breeders aiming to optimize resource allocation. Implementation of efficient approaches for trait prediction, such as the use of high-resolution spectral data acquired by a multispectral camera mounted on unmanned aerial vehicles (UAVs), needs to be explored. In this study, we have acquired multispectral image data with an 11-band multispectral camera mounted on a UAV and analyzed the data with machine learning (ML) models to predict grain yield and important quality traits in breeding micro-plots. Combining 11-band multispectral data for 34 cultivars and 16 environments allowed to develop ML models with good prediction capability. Applying the trained models to test sets explained a considerable degree of phenotypic variance with good accuracy showing r squared values of 0.84, 0.69, 0.64, and 0.61 and normalized root mean squared errors of 0.17, 0.07, 0.14, and 0.03 for grain yield, protein content, vitreousness, and test weight, respectively.

Progress in high-throughput phenotyping and genomics provides the potential to understand the genetic basis of plant functional differentiation. We developed a semi-automatic methodology based on unmanned aerial vehicle (UAV) imagery for deriving tree-level phenotypes followed by genome-wide association study (GWAS). An RGB-based point cloud was used for tree crown identification in a common garden of Pinus halepensis in Spain. Crowns were combined with multispectral and thermal orthomosaics to retrieve growth traits, vegetation indices and canopy temperature. Thereafter, GWAS was performed to analyse the association between phenotypes and genomic variation at 235 single nucleotide polymorphisms (SNPs). Growth traits were associated with 12 SNPs involved in cellulose and carbohydrate metabolism. Indices related to transpiration and leaf water content were associated with six SNPs involved in stomata dynamics. Indices related to leaf pigments and leaf area were associated with 11 SNPs involved in signalling and peroxisome metabolism. About 16-20% of trait variance was explained by combinations of several SNPs, indicating polygenic control of morpho-physiological traits. Despite a limited availability of markers and individuals, this study is provides a successful proof-of-concept for the combination of high-throughput UAV-based phenotyping with cost-effective genotyping to disentangle the genetic architecture of phenotypic variation in a widespread conifer.

This paper addresses the question of whether there has been any genetic gain in yield for durum wheat released in Spain after the Green Revolution and assesses the agronomical and physiological traits associated with evolution of the crop during this time. Field experiments were carried out with a wide range of durum wheat cultivars (released in Spain from 1980 to 2009) and were conducted in different sites embracing a wide range of growing temperatures and water regimes at Aranjuez and Zamadueñas during three consecutive growing seasons (2013/14, 2014/15, 2015/16) under rainfed and supplemental irrigation and at Coria for two consecutive seasons (2014/15 and 2015/16) under rainfed conditions alone. Grain yield increased with the year of release of cultivars at a rate of 24 kg ha−1 y−1 (0.44% y−1) from 1980 to 2003, with no clear additional improvements thereafter. The moderate grain yield improvement from 1980 and 2003 was associated with kernels m−2 and kernels spike−1, with an increase of 117 kernels m−2 y−1 and 0.24 kernels spike−1 y−1, respectively. Moreover, aerial biomass at harvest and grain nitrogen yield increased with the year of release of cultivars for the entire period. However, no differences were found for thousand kernel weight, number of spikes m−2, days to heading, plant height, harvest index, canopy temperature depression, carbon isotope discrimination or grain nitrogen concentration. Overall, these results indicated that the rate of genetic progress in the yield of durum wheat in Spain after the Green Revolution has been low and has even stopped during the last decade, while no clear trend in some grain quality traits (TKW and grain N concentration) was recorded. However, the absolute and relative genetic gains estimated for yield were positively associated with the average mean and maximum daily temperatures from sowing to harvest of the testing site, which suggest that breeding has been performed under high-temperature environments.

[Background], The number of ears per unit ground area (ear density) is one of the main agronomic yield components in determining grain yield in wheat. A fast evaluation of this attribute may contribute to monitoring the efficiency of crop management practices, to an early prediction of grain yield or as a phenotyping trait in breeding programs. Currently the number of ears is counted manually, which is time consuming. Moreover, there is no single standardized protocol for counting the ears. An automatic ear-counting algorithm is proposed to estimate ear density under field conditions based on zenithal color digital images taken from above the crop in natural light conditions. Field trials were carried out at two sites in Spain during the 2014/2015 crop season on a set of 24 varieties of durum wheat with two growing conditions per site. The algorithm for counting uses three steps: (1) a Laplacian frequency filter chosen to remove low and high frequency elements appearing in an image, (2) a Median filter to reduce high noise still present around the ears and (3) segmentation using Find Maxima to segment local peaks and determine the ear count within the image. [Results], The results demonstrate high success rate (higher than 90%) between the algorithm counts and the manual (image-based) ear counts, and precision, with a low standard deviation (around 5%). The relationships between algorithm ear counts and grain yield was also significant and greater than the correlation with manual (field-based) ear counts. In this approach, results demonstrate that automatic ear counting performed on data captured around anthesis correlated better with grain yield than with images captured at later stages when the low performance of ear counting at late grain filling stages was associated with the loss of contrast between canopy and ears. [Conclusions], Developing robust, low-cost and efficient field methods to assess wheat ear density, as a major agronomic component of yield, is hig

The effects of leaf dorsoventrality and its interaction with environmentally induced changes in the leaf spectral response are still poorly understood, particularly for isobilateral leaves. We investigated the spectral performance of 24 genotypes of field-grown durum wheat at two locations under both rainfed and irrigated conditions. Flag leaf reflectance spectra in the VIS-NIR-SWIR (visible–near-infrared–short-wave infrared) regions were recorded in the adaxial and abaxial leaf sides and at the canopy level, while traits providing information on water status and grain yield were evaluated. Moreover, leaf anatomical parameters were measured in a subset of five genotypes. The spectral traits studied were more affected by the leaf side than by the water regime. Leaf dorsoventral differences suggested higher accessory pigment content in the abaxial leaf side, while water regime differences were related to increased chlorophyll, nitrogen, and water contents in the leaves in the irrigated treatment. These variations were associated with anatomical changes. Additionally, leaf dorsoventral differences were less in the rainfed treatment, suggesting the existence of leaf-side-specific responses at the anatomical and biochemical level. Finally, the accuracy in yield prediction was enhanced when abaxial leaf spectra were employed. We concluded that the importance of dorsoventrality in spectral traits is paramount, even in isobilateral leaves.

Reliable methods for estimating wheat grain yield before harvest could help improve farm management and, if applied on a regional level, also help identify spatial factors that influence yield. Regional grain yield can be estimated using conventional methods, but the typical process is complex and labor-intensive. Here we describe the development of a streamlined approach using publicly accessible agricultural data, field-level yield, and remote sensing data from Sentinel-2 satellite to estimate regional wheat grain yield. We validated our method on wheat croplands in Navarre in northern Spain, which features heterogeneous topography and rainfall. First, this study developed stepwise multilinear equations to estimate grain yield based on various vegetation indices, which were measured at various phenological stages in order to determine the optimal timings. Second, the most suitable model was used to estimate grain yield in wheat parcels mapped from Sentinel-2 satellite images. We used a supervised pixel-based random forest classification and the estimates were compared to government-published post-harvest yield statistics. When tested, the model achieved an R2 of 0.83 in predicting grain yield at field level. The wheat parcels were mapped with an accuracy close to 86% for both overall accuracy and compared to official statistics. Third, the validated model was used to explore potential relationships of the mapped per-parcel grain yield estimation with topographic features and rainfall by using geographically weighted regressions. Topographic features and rainfall together accounted for an average for 11 to 20% of the observed spatial variation in grain yield in Navarre. These results highlight the ability of our method for estimating wheat grain yield before harvest and determining spatial factors that influence yield at the regional scale.

The biotrophic fungus Puccinia striiformis f. sp. tritici is the causal agent of the yellow rust in wheat. Between the years 2010–2013 a new strain of this pathogen (Warrior/Ambition), against which the present cultivated wheat varieties have no resistance, appeared and spread rapidly. It threatens cereal production in most of Europe. The search for sources of resistance to this strain is proposed as the most efficient and safe solution to ensure high grain production. This will be helped by the development of high performance and low cost techniques for field phenotyping. In this study we analyzed vegetation indices in the Red, Green, Blue (RGB) images of crop canopies under field conditions. We evaluated their accuracy in predicting grain yield and assessing disease severity in comparison to other field measurements including the Normalized Difference Vegetation Index (NDVI), leaf chlorophyll content, stomatal conductance, and canopy temperature. We also discuss yield components and agronomic parameters in relation to grain yield and disease severity. RGB-based indices proved to be accurate predictors of grain yield and grain yield losses associated with yellow rust (R2 = 0.581 and R2 = 0.536, respectively), far surpassing the predictive ability of NDVI (R2 = 0.118 and R2 = 0.128, respectively). In comparison to potential yield, we found the presence of disease to be correlated with reductions in the number of grains per spike, grains per square meter, kernel weight and harvest index. Grain yield losses in the presence of yellow rust were also greater in later heading varieties. The combination of RGB-based indices and days to heading together explained 70.9% of the variability in grain yield and 62.7% of the yield losses.

A Bayesian network classifier-based algorithm was applied to map the burned area (BA) in the North American boreal region using the 0.05\circ (\sim5\nbsp\hbox{km} ) Advanced Very High Resolution Radiometer (AVHRR) Long-Term Data Record (LTDR) data version 3 time series. The results showed an overall good agreement compared to reference maps (slope = 0.62;\ {R2} = 0.75 ). The study site was divided into six sub-regions, where south-western Canada performed the worst (slope = 0.25;\ {R2} = 0.47 ). The algorithm achieved good results as long as a year with high fire incidence was employed to train the Bayesian network, and the vegetation response to fire remained consistent across the region. Years with higher fire activity and larger fires, which were easier to detect at the LTDR spatial scale, matched the reference maps better. The LTDR postfire signal remained detectable for 6-9 years, extending opportunities to map the full fire extent with Landsat Thematic Mapper (TM). For fires larger than 1000\nbsp\hbox{km}2 , Landsat TM mapped 99%, whereas LTDR caught 69% of the reference BA reported. Landsat TM took four satellite overpasses (2 months) to map these large fires, and in some cases even until the following year, but LTDR detected them within days. Thus, results suggest that LTDR could be used to trigger the search for fires and then map their perimeter with Landsat TM. This study demonstrates an LTDR BA algorithm that could be extrapolated to other boreal regions using a similar methodology, although reference fire perimeters would be needed to train the Bayesian classifier and its thresholds. © 2008-2012 IEEE.