Search

The kinetics of electron attachment to pyruvic acid (CH

While the dissociative recombination (DR) of ground-state molecular ions with low-energy free electrons is generally known to be exothermic, it has been predicted to be endothermic for a class of transition-metal oxide ions. To understand this unusual case, the electron recombination of titanium oxide ions (TiO+) with electrons has been experimentally investigated using the Cryogenic Storage Ring. In its low radiation field, the TiO+ ions relax internally to low rotational excitation (≲100 K). Under controlled collision energies down to [Formula: see text] meV within the merged electron and ion beam configuration, fragment imaging has been applied to determine the kinetic energy released to Ti and O neutral reaction products. Detailed analysis of the fragment imaging data considering the reactant and product excitation channels reveals an endothermicity for the TiO+ dissociative electron recombination of (+4 ± 10) meV. This result improves the accuracy of the energy balance by a factor of 7 compared to that found indirectly from hitherto known molecular properties. Conversely, the present endothermicity yields improved dissociation energy values for D0(TiO) = (6.824 ± 0.010) eV and D0(TiO+) = (6.832 ± 0.010) eV. All thermochemistry values were compared to new coupled-cluster calculations and found to be in good agreement. Moreover, absolute rate coefficients for the electron recombination of rotationally relaxed ions have been measured, yielding an upper limit of 1 × 10−7 cm3 s−1 for typical conditions of cold astrophysical media. Strong variation of the DR rate with the TiO+ internal excitation is predicted. Furthermore, potential energy curves for TiO+ and TiO have been calculated using a multi-reference configuration interaction method to constrain quantum-dynamical paths driving the observed TiO+ electron recombination.

The kinetics of successive reactions of acetylene (C2H2) initiated on either vanadium or iron atomic cations have been investigated under thermal conditions using the variable-ion source and temperature-adjustable selected-ion flow tube apparatus. Consistent with the literature results, the reaction of Fe+ + C2H2 primarily yields Fe+(m/z = (C2H2)3); however, analysis via quantum chemical calculations and statistical modeling shows that the mechanism does not form benzene upon the third acetylene addition. The kinetics are more consistent with successive addition of three acetylene molecules, yielding Fe+(C2H2)3, followed by an addition of a fourth acetylene molecule, initiating cyclotrimerization, yielding either Fe+(C2H2) + neutral benzene or Fe+(Bz) + acetylene, where Bz is a benzene ligand. In contrast, the reaction of V+ + C2H2 yields products via successive associations V+(m/z = (C2H2)n) either with or without a bimolecular step involving loss of one H2 and V+C2(m/z = (C2H2)m), where n and m extend at least up to 11 under conditions of 0.32 Torr at 300 K. Stabilized V+(Bz) is not a significant intermediate in the association mechanism. We propose a plausible mechanism for the generation of neutral benzene in this reaction and compare with the Fe+ results. The reaction steps that produce benzene result in turnover of the single-atom catalyst, and the large hydrocarbons produced that remain associated to the catalyst are proposed to be polycyclic aromatic hydrocarbons.

We show how the powerful combination of temperature-dependent kinetics coupled with detailed statistical modeling can be used to derive dynamical information about transition state barrier heights, the importance of multiple entrance channel complexes, crossings between spin surfaces, energetics, product states, and other information for metal-ion reactions. The methods are not new, but with improved computers, ion sources, ion transport, and better detection techniques, the ability to derive such parameters from the combination of methods has improved greatly. Temperature-dependent kinetics is very sensitive to the above list of parameters because the energy is varied in a controlled way that can be easily modeled. The present measurements, performed in our variable-ion source temperature-adjustable selected-ion flow tube (VISTA-SIFT), have been enabled by advances in ion transport and injection improvements so that dim sources can be used. Replacing the quadrupole mass spectrometer detector with a time-of-flight mass spectrometer solved additional problems. Quantum chemical calculations have improved greatly and provide details about the surfaces, as well as frequencies, to use as starting points for the statistical modeling. For ion-molecule reactions, incorporation of both energy and angular momentum effects are important and we have developed an in-house computer program, based on the work of Juergen Troe, to rapidly compare statistical modeling predictions to the experimental data. As we show, modeling the kinetics data can often determine the most important parameters controlling the reactivity and deriving them is much simpler and usually more accurate than detailed ab initio calculations or dynamical modeling. Additionally, we show that even without statistical modeling, temperature-dependent rate constants as a function of metal anion cluster size can be used to show that such species react by the same mechanism as surfaces. In this review, we discuss reactions of metallic atomic ions, small metal oxide ions, mixed metal oxide ions, and a series of metallic anionic cluster reactions with small molecules such as CO, O2, CO2, N2O, CH4, and several other species. Particular attention was paid to reactions involving bond activation pertinent to catalysis.

The reactions of anionic metal clusters Mn– with O2 (M = V (n = 1–15), Cr (n = 1–15), Co (n = 1–12), and Ni (n = 1–14)) are investigated from 300 to 600 K using a selected-ion flow tube. All rate c...

The mutual neutralisation of O+ with O- has been studied in a double ion-beam storage ring with combined merged-beams, imaging and timing techniques. Branching ratios were measured at the collision energies of 55, 75 and 170 (+/- 15) meV, and found to be in good agreement with previous single-pass merged-beams experimental results at 7 meV collision energy. Several previously unidentified spectral features were found to correspond to mutual neutralisation channels of the first metastable state of the cation (O+(D-2(o)), tau approximate to 3.6 hours), while no contributions from the second metastable state (O+(P-2(o)), tau approximate to 5 seconds) were observed. Theoretical calculations were performed using the multi-channel Landau-Zener model combined with the anion centered asymptotic method, and gave good agreement with several experimentally observed channels, but could not describe well observed contributions from the O+(D-2(o)) metastable state as well as channels involving the O(3s S-5(o)) state.

The direct formation of

The catalytic oxidation of CO by N2O promoted by Co+ was studied as a function of temperature in a variable-ion source temperature-adjustable selected-ion flow tube (VISTA-SIFT). Each step of the c...

The reactions of Al2O2+ + N2O and Al2O3+ + CO, forming a catalytic cycle oxidizing CO by N2O, have been investigated from 300 to 600 K in a variable ion source, temperature adjustable, selected-ion...

The kinetics of V+ + N2O and VO+ + N2O are studied using a selected-ion flow tube from 300-600 K at pressures of 0.25-0.70 Torr helium. V+ + N2O yields VO+ (k = 4.9 ± 1.0 (T/300 K)-0.3±0.2 × 10-10 cm3 s-1) in both ground and excited states. The secondary reaction VO+ + N2O → VO2+ + N2 proceeds near the collision rate at >10-10 cm3 s-1, whereas thermalized VO+ + N2O studied as a primary reaction proceeds more than 100× more slowly (k = 4.2 ± 1.0 (T/300 K)-1.4±0.2 × 10-12 cm3 s-1). The results are best explained by contributions of competing pathways in V+ + N2O: a spin crossing to the lower energy 3VO+ in the exit well and a spin-conserved reaction yielding an electronically excited 5VO+. The intersystem crossing occurs in 35 ± 20% and 37 ± 15% of reactive interactions at 300 and 600 K, respectively. Statistical modeling of relevant reaction coordinates supports the lack of a temperature dependence, indicates an intersystem crossing rate constant of 1011 s-1, and yields derived bond and transition state energies.

The kinetics of successive reactions of acetylene (C

Electronically excited NdO is a possible product of the chemistry associated with the release of Nd into the ionosphere, and emission from these states may contribute to the observations following such experiments. To better characterize the energetics and spectroscopy of NdO, we report a combined experimental and theoretical study using slow photoelectron velocity-map imaging spectroscopy of cryogenically cooled NdO¯ anions (cryo-SEVI) supplemented by wavefunction-based quantum-chemical calculations. Using cryo-SEVI, we measure the electron affinity of NdO to be 1.0091(7) eV and resolve numerous transitions to low-lying electronic and vibrational states of NdO that are assigned with the aid of the electronic structure calculations. Additionally, temperature-dependent data suggests contributions from the (2)4.5 state of NdO¯ residing 2350 cm-1 above the ground anion state. Photodetachment to higher-lying excited states of NdO is also reported, which may help clarify observations from prior release experiments.

Mass-selected aluminum anion clusters, Aln–, were reacted with O2. Rate constants (300 K) for 2 < n < 30 and product branching fractions for 2 < n < 17 are reported. Reactivity is strongly anticorrelated to Aln– electron binding energy (EBE). Al13– reacts more slowly than predicted by EBE but notably is not inert, reacting at a measurable 0.05% efficiency (2.5 ± 1.5 × 10–13 cm3 s–1). Al6– is also an outlier, reacting more slowly than expected after accounting for other factors, suggesting that high symmetry increases stability. Implications of observed Al13– reactivity, contributions of both electronic shell-closing and geometric homogeneity to Aln– resistance to O2 etching, and future directions to more fully unravel the reaction mechanisms are discussed.

The kinetics of V nO m+ + CCl4 ( n, m = 2, 5; 3, 6-8; 4, 9-11; 5, 12-13) have been measured under thermal conditions using a selected-ion flow tube equipped with a laser vaporization ion source. All reactions proceed at approximately the capture rate limit, yielding three dominant categories of products: CCl3+ + V nO mCl (i.e., chloride transfer), COCl2 (phosgene) formation, and CO2 formation. Both CO2 and COCl2 are products of CCl4 reaction on a bulk vanadium oxide surface, while chloride (or chlorine) transfer is not observed. The product branching fraction of CCl3+ approaches 100% for small (V2) reactants and generally decreases with increasing cluster size down to

The temperature dependencies of the reactions MnO+ + H2/D2 from 150 to 600 K are measured in a selected- ion flow tube apparatus. The reactions are approximately 15% efficient at room temperature with rate constants (k = 2.7 ± 0.7 × 10−10 cm3 s-1 for H2 and 1.5 ± 0.4 × 10−10 cm3 s-1 for D2 at 300 K) that vary as T-1.1±0.2 and T-1.3±0.2, respectively. Both Mn+ and MnOH+/D+ products are observed, with Mn+ being the minority product in the H2 reaction, but the majority product in the D2 reaction. Reaction coordinates are explored using a variety of density functional methods, with quantitative but not qualitative differences in the results. Unlike the analogous FeO+ + H2 reaction, no evidence for spin inversion prior to the rate-limiting transition state is found. A crossing between septet and quintet potential energy surfaces in the product well exists, and the possibility of spin inversion on the way to products is discussed. The reaction coordinates inform a statistical treatment of the reaction, which well reproduces all kinetic results, including the product branching inversion observed due to isotope substitution.

The catalytic oxidation of CO by N

The bond dissociation energies at 0 K (BDE) of Au2+-CH4 and Au2CH4+-CH4 have been determined using two separate experimental methods. Analyses of collision-induced dissociation cross sections for Au2CH4+ + Xe and Au2(CH4)2+ + Xe measured using a guided ion beam tandem mass spectrometer (GIBMS) yield BDEs of 0.71 ± 0.05 and 0.57 ± 0.07 eV, respectively. Statistical modeling of association kinetics of Au2(CH4)0-2+ + CH4 + He measured from 200 to 400 K and at 0.3-0.9 Torr using a selected-ion flow tube (SIFT) apparatus yields slightly higher values of 0.81 ± 0.21 and 0.75 ± 0.25 eV. The SIFT data also place a lower limit on the BDE of Au2C2H8+-CH4 of 0.35 eV, likely an activated isomer, not Au2(CH4)2+-CH4. Particular emphasis is placed on determining the uncertainty in the derivation from association kinetics measurements, including uncertainties in collisional energy transfer, calculated harmonic frequencies, and possible contribution of isomerization of the association complexes. This evaluation indicates that an uncertainty of ±0.2 eV should be expected and that an uncertainty of better than ±0.1 eV is unlikely to be reasonable.

The reactions of Al

The kinetics of MgO + + CH 4 was studied experimentally using the variable ion source, temperature adjustable selected ion flow tube (VISTA-SIFT) apparatus from 300 − 600 K and computationally by running and analyzing reactive atomistic simula- tions. Rate coefficients and product branching fractions were determined as a function of temperature. The reaction proceeded with a rate of k = 5 . 9 ± 1 . 5 × 10 − 10 ( T/ 300 K) − 0 . 5 ± 0 . 2 cm 3 s − 1 . MgOH + was the dominant product at all temperatures, but Mg + , the co-product of oxygen-atom transfer to form methanol, was observed with a product branching fraction of 0 . 08 ± 0 . 03( T/ 300 K) − 0 . 8 ± 0 . 7 . Reactive molecular dynamics simulations using a reactive force field, as well as a neural network trained on thousands of structures yield rate coefficients about one order of magnitude lower. This underestimation of the rates is traced back to the multireference character of the transition state [MgOCH 4 ] + . Statistical modeling of the temperature-dependent kinetics provides further insight into the reactive potential surface. The rate limiting step was found to be consistent with a four-centered activation of the C-H bond, consistent with previous calculations. The product branching was modeled as a competition between dissociation of an insertion intermediate directly after the rate- limiting transition state, and traversing a transition state corresponding to a methyl migration leading to a Mg-CH 3 OH + complex, though only if this transition state is stabilized significantly relative to the dissociated MgOH + + CH 3 product channel. An alternative non-statistical mechanism is discussed, whereby a post-transition state bifurcation in the potential surface could allow the reaction to proceed directly from the four-centered TS to the Mg-CH 3 OH + complex thereby allowing a more robust competition between the product channels .

The mechanisms involved in catalytic oxidation of CO by N2 O promoted by the AlVO3+ and AlVO4+ ions are evaluated using temperature-dependent rate constants and statistical modeling. Reactions were studied from 300-600 K using a selected ion flow tube (SIFT) apparatus, and the data compared to statistical modeling of proposed mechanisms previously identified by density functional theory (DFT) calculations. Reduction of N2 O by AlVO3+ was found to take place only by complexation to the Al site; however, attack on the V site also occurred and led to stable association complexes, reducing the overall efficiency of the reaction. As the AlVO3+ (N2 O) complex resulted from approach on the V site, it did not block the reactive Al site and was observed to further react with N2 O to form AlVO4+ (N2 O). The oxidation of CO by AlVO4+ was found to proceed solely by activation on the Al-O site; however, isomerization of complexes formed with CO initially complexed to the V site were found to add to the reactivity, especially at lower temperatures.

The kinetics of V

The temperature-dependent kinetics for reactions of V+, Fe+, and Co+ with OCS are measured using a selected ion flow tube apparatus heated to 300–600 K. All three reactions proceed solely by C–S activation at thermal energies, resulting in metal sulfide cation formation. Previously calculated reaction pathways were employed to inform statistical modeling of these reactions for comparison to the data. As surmised previously, all three reactions at thermal energies require spin crossing, with the Fe+ reaction crossing once circumventing a prohibitive transition state, before crossing again to form ground state products. The Fe+ and Co+ reaction efficiencies increase with energy. For the Co+ reaction, and to a lesser extent the Fe+ reaction, the apparent activation energies are less than the reaction endothermicities, possibly indicating increasing diabatic behavior of the spin crossings with energy. The V+ reaction was well modeled assuming an entirely adiabatic spin crossing, such that the resultant avoide...

Reactions of the cations Ar+, O2+, CO2+, and CF3+ with the C2 radicals C2H5, H2C2F3, C2F3, and C2F5 were investigated using the variable electron and neutral density attachment mass spectrometry technique in a flowing afterglow–Langmuir probe apparatus at room temperature. Rate coefficients for observed product channels for these 16 reactions are reported as well as rate coefficients and product branching fractions for the 16 reactions of the same cations with each of the stable neutrals used as radical precursors (the species RI, where R is the radical studied). Reactions with the stable neutrals proceed by charge transfer at or near the collisional rate coefficient where energetically allowed; where charge transfer is endothermic, bond-breaking/bond-making chemistry occurs. While also efficient, reactions with the radicals are more likely to occur at a smaller fraction of the collisional rate coefficient, and bond-breaking/bond-making chemistry occurs even in some cases where charge transfer is exotherm...

The pressure and temperature dependences of the reactions of Fe+ with methyl halides CH3X (X = Cl, Br, I) in He were measured in a selected ion flow tube over the ranges 0.4 to 1.2 Torr and 300-600 K. FeX+ was observed for all three halides and FeCH3+ was observed for the CH3I reaction. FeCH3X+ adducts (for all X) were detected in all reactions. The results were interpreted assuming two-state reactivity with spin-inversions between sextet and quartet potentials. Kinetic modeling allowed for a quantitative representation of the experiments and for extrapolation to conditions outside the experimentally accessible range. The modeling required quantum-chemical calculations of molecular parameters and detailed accounting of angular momentum effects. The results show that the FeX+ products come via an insertion mechanism, while the FeCH3+ can be produced from either insertion or SN2 mechanisms, but the latter we conclude is unlikely at thermal energies. A statistical modeling cannot reproduce the competition between the bimolecular pathways in the CH3I reaction, indicating that some more direct process must be important.

Atomic samarium has been injected into the neutral atmosphere for production of electron clouds that modify the ionosphere. These electron clouds may be used as high-frequency radio wave reflectors or for control of the electrodynamics of the F region. A self-consistent model for the photochemical reactions of Samarium vapor cloud released into the upper atmosphere has been developed and compared with the Metal Oxide Space Cloud (MOSC) experimental observations. The release initially produces a dense plasma cloud that that is rapidly reduced by dissociative recombination and diffusive expansion. The spectral emissions from the release cover the ultraviolet to the near infrared band with contributions from solar fluorescence of the atomic, molecular, and ionized components of the artificial density cloud. Barium releases in sunlight are more efficient than Samarium releases in sunlight for production of dense ionization clouds. Samarium may be of interest for nighttime releases but the artificial electron cloud is limited by recombination with the samarium oxide ion.

We present rate constants and product branching ratios for the reactions of FeOx+ (x = 0–4) with ozone at 500 K. Fe+ is observed to react with ozone at the collision rate to produce FeO+ + O2. The FeO+ in turn reacts with ozone at the collision rate to yield both Fe+ and FeO2+ product channels. Ions up to FeO4+ display similar reactivity patterns. Three-body clustering reactions with O2 prevent us from measuring accurate rate constants at 300 K although the data do suggest that the efficiency is also high. Therefore, it is probable that little to no temperature dependence exists over this range. Implications of our measurements to the regulation of atmospheric iron and ozone are discussed. Density functional calculations on the reaction of Fe+ with ozone show no substantial kinetic barriers to make the FeO+ + O2 product channel, which is consistent with the reaction’s efficiency. While a pathway to make FeO2+ + O is also found to be barrierless, our experiments indicate no primary FeO2+ formation for this...

Mass-selected aluminum anion clusters, Al

The kinetics of V

The role of collisional energy transfer in ion-molecule association reactions is analyzed. Rate constants for the formation of adducts between HCl and NO3−(HNO3)x (H2SO4)y or HSO4−(HNO3)x (H2SO4)y (with x = 0–2 and y = 0–2) in the buffer gases H2, He, and N2 and at temperatures between 150 and 300 K are considered. Quantum-chemical calculations of molecular parameters and statistical unimolecular rate theory are combined to model low-pressure rate constants whereas ion-molecule capture theory provides high-pressure rate constants. The comparison with experimental results indicates that energy transfer is dominated by overall collision numbers while weak-collision effects are only of minor importance. On the other hand, often neglected falloff effects between termolecular and bimolecular reaction behavior have to be taken into account.

We present 300 K rate constants for the ion-ion reactions of O + a n d N + with the atomic halide anions: C l - , B r - , a n d I - measured using a flowing afterglow – Langmuir probe apparatus. All six rate constants were > 1 × 10 - 8 c m 3 s - 1 , larger than those typical for atomic ion – atomic ion reactions, approaching the rate constants of more complex ion-ion systems. Evaluation of literature atomic ion – atomic ion rate constants shows variation over orders of magnitude, but limited to below the expected value for a polyatomic ion-ion reaction of the same reduced mass, fitting into an expected physical picture. Unlike for polyatomic systems, estimation of rate constant for atomic ion – atomic ion reaction rates by simple means does not seem effective.

Limiting high pressure rate constants for the association of H with C6H5+ and of CH3, C2H5, and n-C3H7 radicals with C7H7+ molecular ions are analyzed in terms of “rigidity factors” arising from the anisotropy of the interaction potentials and “collision rate constants” in the absence of anisotropy (the latter corresponding to phase space theory, PST). Model calculations based on ab initio potential energy surfaces show that the PST rate constants kPST(T) exceed collision rate constants from conventional ion-molecule capture theory (in this case given by Langevin rate constants kL). They can be represented by kPST(T) = kL + kh.sph. where kh.sph. denotes hard-sphere collision numbers with collision radii r0. The r0 derived from the modelled kPST(T) are related to properties of the interaction potentials. Applications to other ion-molecule reactions are proposed.

An orthogonally accelerated time-of-flight mass spectrometer has been added to a flowing afterglow–Langmuir probe apparatus, coupled by a rectilinear ion guide. The TOF has improved the signal-to-noise (S/N) ratio by about an order of magnitude over a quadrupole mass filter/electron multiplier detection typical for flow tube instruments of this type and used previously. The improved S/N reduces our data acquisition time commensurately. Additionally, mass discrimination is low enough that it is minimal for ions heavier than ∼10 amu. The lack of mass discrimination not only reduces experiment time but also leads to greater accuracy in the measurement of reaction rate coefficients. Finally, simultaneous detection of both heavy and light ions is improved. H + can now be detected and WF 5 + isotopes can be separated without reducing sensitivity. We have found that discrimination against low-mass ions can occur when certain electron-attaching reactants are used (e.g. SF 6 ), and possibly due to radicals formed after certain other reactants attach electrons. Evidence points to adsorption of these species on surfaces of the ion guide immediately behind the flowing afterglow sampling orifice, which separates the flow tube and TOF region. The adsorption follows a Langmuir isotherm profile and is greatly reduced by heating the gas in the flow tube.

Electron attachment to phosphoryl chloride (phosphorus oxychloride) POCl 3 has been studied in the gas phase by mass spectrometry at several low temperatures (47.7, 74.5, 169.7 and 199.5 K) with the CRESU method. By measuring over this temperature range and data from [8] , we have demonstrated the inversion of the branching ratio between the exothermic non-dissociative exit channel POCl 3 − and the thermo-neutral dissociative exit channel POCl 2 − + Cl. A kinetic model in terms of statistical theory is used to fit the experimental data.

Rate constants for the reactions of C+ + Cl-, Br-, and I- were measured at 300 K using the variable electron and neutral density electron attachment mass spectrometry technique in a flowing afterglow Langmuir probe apparatus. Upper bounds of

The temperature dependent kinetics of Ni+ + O3 and of NiO+ + CH4/CD4 are measured from 300 to 600 K using a selected-ion flow tube apparatus. Together, these reactions comprise a catalytic cycle converting CH4 to CH3OH. The reaction of Ni+ + O3 proceeds at the collisional limit, faster than previously reported at 300 K. The NiO+ product reacts further with O3, also at the collisional limit, yielding both higher oxides (up to NiO5+ is observed) as well as undergoing an apparent reduction back to Ni+. This apparent reduction channel is due to the oxidation channel yielding NiO2+* with sufficient energy to dissociate. 4NiO+ + CH4 (CD4) (whereas 4NiO+ refers to the quartet state of NiO+) proceeds with a rate constant of (2.6 ± 0.4) × 10–10 cm3 s–1 [(1.8 ± 0.5) × 10–10 cm3 s–1] at 300 K and a temperature dependence of ∼T–0.7±0.3 (∼T–1.1±0.4), producing only the 2Ni+ + 1CH3OH channel up to 600 K. Statistical modeling of the reaction based on calculated stationary points along the reaction coordinate reproduces ...

The temperature-dependent kinetics for reactions of V

Reactions of samarium cations with carbonyl sulfide are examined using a guided ion beam tandem mass spectrometer and a variable temperature selected ion flow tube apparatus. Formation of SmS+ + CO is observed in both instruments with a kinetic energy and temperature dependence demonstrating a barrierless reaction occurring with an efficiency of 26 ± 9%. Formation of SmO+ + CS is also observed at high kinetic energies and exhibits a threshold determined as 2.81 ± 0.32 eV, substantially higher than expected from known thermochemistry. The potential energy surfaces for these reactions along sextet and octet spin surfaces are also examined theoretically at the MP2 and CCSD(T) levels. The observed barrier for oxidation is shown to likely correspond to the energy of the crossing between surfaces corresponding to the ground state electronic configuration of Sm+ (8F,4f66s1) and an excited surface having two electrons in the valence space (excluding 4f), which are needed to form the strong SmO+ bond. In contrast,...

A new ion detection scheme incorporating both time-of-flight and quadrupole instrumentation has been implemented on a variable temperature selected ion flow tube and is described here. The new detection region retains typical quadrupole detection for the study of most systems, and adds time-of-flight capability to study systems over a wide mass range while minimizing the effects of mass discrimination. Experiments verify the accuracy of the kinetics obtained with time-of-flight detection. We find excellent agreement with previously published rate constants and product branching for the reactions of Ar+ with SF6 and C2H4. Additionally, new results are presented for the reaction of Ar+ with WF6, observing a rate constant of 1.23 × 10−9 cm3 s−1, with product branching of 0.9 and 0.1 to WF5+ and WF6+ respectively.

The rates of the reactions Fe(+) + N2O → FeO(+) + N2 and FeO(+) + CO → Fe(+) + CO2 are modeled by statistical rate theory accounting for energy- and angular momentum-specific rate constants for formation of the primary and secondary cationic adducts and their backward and forward reactions. The reactions are both suggested to proceed on sextet and quartet potential energy surfaces with efficient, but probably not complete, equilibration by spin-inversion of the populations of the sextet and quartet adducts. The influence of spin-inversion on the overall reaction rate is investigated. The differences of the two reaction rates mostly are due to different numbers of entrance states (atom + linear rotor or linear rotor + linear rotor, respectively). The reaction Fe(+) + N2O was studied either with (6)Fe(+) or with (4)Fe(+) reactants. Differences in the rate constants of (6)Fe(+) and (4)Fe(+) reacting with N2O are attributed to different contributions from electronically excited potential energy surfaces, such as they originate from the open-electronic shell reactants.