Search

Ceramic materials in Na2O-CaO-P2O5 system were obtained by firing cement-salt stone made from pastes based on powder mixtures including calcium citrate tetrahydrate Ca3(C6H5O7)2∙4H2O, monocalcium phosphate monohydrate (MCPM) Ca(H2PO4)2∙H2O and/or sodium dihydrogen phosphate NaH2PO4. The phase composition of the obtained samples of cement-salt stone after adding water, hardening and drying included brushite CaHPO4∙2H2O, monetite CaHPO4 and also unreacted Ca3(C6H5O7)2∙4H2O, Ca(H2PO4)2∙H2O and/or NaH2PO4. The phase composition of ceramics in Na2O-CaO-P2O5 system obtained by firing cement-salt stone was formed due to thermal conversion of hydrated salt and heterophase reactions between components presented in samples during firing. The phase composition of ceramic samples based on powder mixture of Ca3(C6H5O7)2∙4H2O and Ca(H2PO4)2∙H2O after firing at 900 °C included β-calcium pyrophosphate (CPP) β-Ca2P2O7. The phase composition of ceramic samples based on powder mixture of Ca3(C6H5O7)2∙4H2O, and NaH2PO4 after firing at 900 °C included β-sodium rhenanite β-CaNaPO4. The phase composition of ceramic samples based on powder mixture of Ca3(C6H5O7)2∙4H2O, Ca(H2PO4)2∙H2O and NaH2PO4 after firing at 900 °C included β-Ca2P2O7, β-CaNaPO4, double calcium-sodium pyrophosphate Na2CaP2O7, and Na-substituted tricalcium phosphate Сa10Na(PO4)7. Obtained ceramic materials in Na2O-CaO-P2O5 system including biocompatible and biodegradable phases could be important for treatments of bone tissue defects by means of approaches of regenerative medicine.

Composite powders were synthesized from the water solutions of sodium silicate and different calcium salts (nitrate, chloride, and acetate) at a Ca/Si molar ratio of 1.0. According to the XRD data, all the synthesized powders included hydrated calcium silicate Ca1,5SiO3,5·xH2O (Ca/Si molar ratio = 1.5) and calcium carbonate CaCO3 (Ca/Si molar ratio = ∞). The presence of H2SiO3 or SiO2·xH2O in the synthesized powders was assumed to be due to the difference between the Ca/Si molar ratio of 1.0 specified by the synthesis protocol and the molar ratio of the detected products. Reaction by-products (sodium nitrate NaNO3, sodium chloride NaCl, and sodium acetate NaCH3COO) were also found in the synthesized powders after filtration and drying. According to the XRD data phase composition of all powders after washing four times consisted of the quasi-amorphous phase and calcium carbonate in the form of calcite. Calcium carbonate in the form of aragonite was detected in powders synthesized from calcium chloride CaCl2 and calcium nitrate Ca(NO3)2 before and after washing. Synthesized powders containing reaction by-products and washed powders were used for the preparation of ceramics at 900, 1000, and 1100 °C. The phase composition of the ceramic samples prepared from the washed powders and powder containing NaCl after firing at 900 and 1000 °C consisted of β-wollastonite β-CaSiO3, and, after firing at 1100 °C, consisted of both β-wollastonite β-CaSiO3 and pseudo-wollastonite α-CaSiO3. The phase composition of the ceramic samples prepared from powders containing sodium nitrate NaNO3 and sodium acetate NaCH3COO after firing at 900, 1000, and 1100 °C consisted of calcium sodium silicates, i.e., Na2Ca2Si3O9 (combeite) and Na2Ca3Si2O8. Synthesized and washed composite powders can be used for the preparation of biocompatible materials, in the technology of construction materials, and as components of lunar soil simulants.