Search

A principal possibility to overcome fundamental (intrinsic) limit of pure optical materials laser light resistance is investigated by designing artificial materials with desired optical properties. We explore the suitability of high band-gap ultra-low refractive index material (n less than 1.38 at 550 nm) in the context of highly reflective coatings with enhanced optical resistance. The new generation all-silica (porous/nonporous) SiO2 thin film mirror with 99% reflectivity was prepared by glancing angle deposition (GLAD). Its damage performance was directly compared with state of the art hafnia/silica coating produced by Ion-Beam-Sputtering. Laser-Induced Damage Thresholds (LIDT) of both coatings were measured in nanosecond regime at 355 nm wavelength. Novel approach indicates the potential for coating to withstand laser fluence of at least 65 J/cm2 without reaching intrinsic threshold value. Reported concept can be expanded to virtually any design thus opening a new way of next generation thin film production well suited for high power laser applications.

A simple procedure is demonstrated for fabrication of waveplates which can be released from substrate by laser cutting. Oblique angle deposition, chemical etching and laser inscription steps were used for the final lift-off and release of micro-waveplates in HCl solution., 3 pages

The nonlinear LBO (LiB3O5) crystal is widely used in many Nd : YAG, Yb : KGW and Nd : YLF lasers in order to generate higher optical harmonics. However, the most limiting factor in such applications is the optical resistance of their coated surfaces described by the so-called Laser Induced Damage Threshold (LIDT) parameter. In this work we investigate the “fatigue” (multi-pulse) behaviour of LIDTs in LBO crystals coated with different types of (single AR@355 nm and triple AR@355+532+1064 nm wavelength) anti-reflective coatings while optimising the refractive index designs and selecting appropriate sub-layer materials. All the coatings were produced of different oxide materials (ZrO2, Al2O3, SiO2) and ZrO2-SiO2 mixtures by using the ion beam sputtering (IBS) deposition technique. The optical damage resistance of both fixed and transient refractive index coatings is of special interest. Besides the spectral properties, the resistance to laser irradiation is characterised at the wavelength of 355 nm with laser pulses of nanosecond duration. The conclusions are drawn about the AR coated LBO with the most successful designs by the means of optical resistance.

We present the flat focusing mirror - the dielectric mirrors capable to focus and image the narrow beams in reflections. The mirrors are flat, and transversally invariant, i.e. have no optical axis. We consider two different configurations of such mirrors: 1) Bragg-like mirrors, consisting of structure of specially designed dielectric layers; 2) periodically modulated surface on a subwavelength scale. We also discuss the combined case - the longitudinally chirped photonic crystals.

The laser damage resistance of an optical element in high power laser systems depends significantly on the surface quality of the optical substrate. In this experiment, commercially polished fused silica substrates were etched in argon plasma generated by a RF source and their surface roughness, flatness and optical properties were investigated. This method can be applied in a vacuum chamber prior to deposition of the multilayer coatings without breaking the vacuum. It was shown that by etching the resistance to 355 nm, laser radiation could be improved more than 8 times. However, it strongly related with primary substrate quality. The etching depth from 100 nm suggests the optimum performance of surface quality in terms of surface low roughness, high flatness, and high laser damage threshold. These results are of significant importance for the manufacture of high quality laser optics on fused silica substrates. As an example of an application of our technology, anti-reflective and polarizing optical interference coatings were deposited on etched substrates and the increase of their resistance to laser radiation was measured.

Achieving higher optical power in UV laser systems is a challenging task due to the limited performance of their built-in optical elements. As a rule of thumb, interference coatings of such elements are found to be the weakest links by the means of laser-induced damage threshold (LIDT). The optical resistance is directly attributed to the fundamental absorption properties of deposited layers. Unfortunately, there are only a limited set of available materials with discrete refractive indices that are also compatible with UV applications. In this study, an attempt is made to employ sculptured layers in order to produce durable anti-reflective (AR) coatings by using the so-called glancing angle deposition (GLAD) method. Spectral, structural, mechanical and stress properties of GLAD coatings were investigated in detail. AR coatings produced by GLAD were found to be three times more laser damage resistant at 355 nm wavelength as compared to those prepared by ion beam sputtering (IBS).

We propose and demonstrate a novel functionality of chirped mirror for monochromatic light beams: a diffraction control in reflections resulting in focusing or imaging of beams. The chirped mirrors, commonly used for manipulating temporal profiles of pulses, here are applied for manipulating the spatial dispersion of a monochromatic beam. By penetrating into dielectric layers of chirped mirror, the monochromatic beam experiences the negative diffraction, therefore the beam diverge propagating in front and behind the structure in normal diffraction region can be compensated inside this structure with negative diffraction. The result is focusing or imaging of the reflected beam from a flat interface of chirped mirror without optical axis.

ZrO2-SiO2 and Nb2O5-SiO2 mixture coatings as well as those of pure zirconia (ZrO2), niobia (Nb2O5), and silica (SiO2) deposited by ion-beam sputtering were investigated. Refractive-index dispersions, bandgaps, and volumetric fractions of materials in mixed coatings were analyzed from spectrophotometric data. Optical scattering, surface roughness, nanostructure, and optical resistance were also studied. Zirconia-silica mixtures experience the transition from crystalline to amorphous phase by increasing the content of SiO2. This also results in reduced surface roughness. All niobia and silica coatings and their mixtures were amorphous. The obtained laser-induced damage thresholds in the subpicosecond range also correlates with respect to the silica content in both zirconia- and niobia-silica mixtures.

A novel application of chirped dielectric mirrors for narrow beam focalization is proposed and demonstrated numerically and experimentally. Analogy to temporal dispersion compensation by chirped dielectric mirrors is discussed.