Author: "M. Ajaj" / Search Limiters: Full Text - Searchworks@Jio Institute Digital Library Search Results

Your search keyword '"M. Ajaj"' showing total 61 results

Start Over Author "M. Ajaj" Search Limiters Full Text

61 results on '"M. Ajaj"'

1. On the Aeroelasticity of a Cantilever Wing Equipped with the Spanwise Morphing Trailing Edge Concept

Author: Jafar S. Pilakkadan, Rafic M. Ajaj, Zawar Haider, and Mohammadreza Amoozgar
Subjects: spanwise morphing trailing edge, aeroelasticity, gust load alleviation, controller, Motor vehicles. Aeronautics. Astronautics, TL1-4050
Abstract: This paper studies the aeroelastic behavior of a rectangular, cantilever wing equipped with the spanwise morphing trailing edge (SMTE) concept. The SMTE consists of multiple trailing edge flaps that allow controlling the spanwise camber distribution of a wing. The flaps are attached at the wing’s trailing edge using torsional springs. The Rayleigh–Ritz method is used to develop the equations of motion of the wing-flap system. The use of shape functions allows for representing the wing as an equivalent 2D airfoil with generalized coordinates that are defined at the wingtip. Strip theory, based on Theodorsen’s unsteady aerodynamic model, is used to compute the aerodynamic loads acting on the wing. A representative Padé approximation for Theodorsen’s function is utilized to model the aerodynamic behaviors in a state-space form allowing time-domain simulation and analysis. The model is validated using a rectangular cantilever wing and the data are available in the literature. A comprehensive parametric comparison study is conducted to assess the impact of flap stiffness on the aeroelastic boundary. In addition, the potential of the SMTE to provide load alleviation and flutter suppression is assessed for a wide range of flight conditions, using a discrete (1-cosine) gust. Finally, the implementation and validation of a controller for a wing with SMTE for gust load alleviation are studied and controller parameters are tuned for a specific gust model.
Published: 2023
Full Text: View/download PDF

2. Elastomer-based skins for morphing aircraft applications: Effect of biaxial strain rates and prestretch

Author: Dilshad Ahmad, Rafic M. Ajaj, and Mohammadreza Amoozgar
Subjects: Polymers, Biaxial characterization, Prestretch, Morphing wing, Ecoflex, DIC, Polymers and polymer manufacture, TP1080-1185
Abstract: There is an emerging trend in the morphing aircraft research where two or more morphing degrees of freedom are used on a wing which leads to the concept of polymorphing. The skin of the morphing wing must be flexible in the morphing direction but stiff in other directions to withstand the aerodynamic loads and maintain the airfoil shape. Polymorphing changes the loadings profile (from uniaxial to biaxial) and increases the complexity of designing suitable morphing skins. Furthermore, elastomeric materials used on morphing wings are usually prestretched to prevent wrinkling and to increase their out-of-plane stiffness. This paper focuses on elastomeric morphing skins and it studies the effect of biaxial strain rates and prestretch ratios on important mechanical properties such as stiffness, hysteresis losses (%), and stress relaxations (%) from an experimental perspective. Three polymeric materials are considered: Latex, Oppo, and Ecoflex. This study provides a mechanical comparative understanding of the three polymers used in the morphing wing under biaxial loading (two morphing degrees of freedom).
Published: 2022
Full Text: View/download PDF

3. The Effect of Non-Conservative Compressive Force on the Vibration of Rotating Composite Blades

Author: Mohammadreza Amoozgar, Mahdi Bodaghi, and Rafic M. Ajaj
Subjects: free vibration, composite blade, non-conservative force, stability, extension–twist elastic couplings, Physics, QC1-999
Abstract: This paper investigates the effectiveness of a resonance avoidance concept for composite rotor blades featuring extension–twist elastic coupling. The concept uses a tendon, attached to the tip of the blade, to apply a proper amount of compressive force to tune the vibration behavior of the blade actively. The tendon is simulated by applying a non-conservative axial compressive force applied to the blade tip. The main load carrying part of the structure is the composite spar box, which has an antisymmetric layup configuration. The nonlinear dynamic behavior of the composite blade is modelled by using the geometrically exact fully intrinsic beam equations. The resulting nonlinear differential equations are discretized using a time–space scheme, and the stationary and rotating frequencies of the blade are obtained. It is observed that the proposed resonance avoidance mechanism is effective for tuning the vibration behavior of composite blades. The applied compressive force can shift the frequencies and the location at which the frequency veering take place. Furthermore, the compressive force can also cause the composite blade to get unstable depending on the layup ply angle. Finally, the results, highlighting the importance of compressive force and ply angle on the dynamic behavior of composite blades, are presented and discussed.
Published: 2020
Full Text: View/download PDF

4. Multiaxial mechanical characterization of latex skin for morphing wing application

Author: Dilshad Ahmad and Rafic M. Ajaj
Subjects: Polymers, Multiaxial characterization, Hysteresis, Morphing wing, Latex skin, Polymers and polymer manufacture, TP1080-1185
Abstract: A morphing aircraft continuously adjusts its wing geometry to achieve optimal flight characteristics for a wide range of flight conditions. Research on morphing aircraft has focused on developing wings with 1 morphing degree of freedom “monomorphing”. However, nowadays the focus is on developing wings with multiple morphing degrees of freedom “polymorphing”. One of the key design challenges for morphing aircraft technology is the development of skin capable of facilitating morphing whilst maintaining the aerodynamic shape of the wing. Soft polymeric materials represent a potential candidate to act as morphing skin because of their ability to undergo large deformation in multiaxial directions. In this study, latex skin is characterized under all possible deformation modes such as uniaxial, pure shear, biaxial, and equibiaxial to account for monomorphing and polymorphing applications. The effects of strain rate, thickness, and aspect ratio on hysteresis loss, stress relaxation and, stiffness are also studied. The outcomes of this study provide a comprehensive understanding of the mechanical viscoelastic behavior of latex skin under various deformation modes.
Published: 2022
Full Text: View/download PDF

5. On the Aeroelasticity of the Active Span and Passive Pitching Polymorphing Wing: Effect of Morphing Rate

Author: Zawar Haider, Rafic M. Ajaj, and Lakmal Seneviratne
Subjects: aeroelasticity, morphing rate, morphing wing, axially moving beam, flutter, vibration, Motor vehicles. Aeronautics. Astronautics, TL1-4050
Abstract: This paper studies the effect of morphing rate on the aeroelasticity of a polymorphing wing capable of active span extension and passive twist/pitch. A variable domain size finite element model is developed to capture the dynamic effects due to the presence of a variable span in the Euler–Bernoulli beam model, which introduces a structural damping term in the equations of motion. The effect of various morphing rates on the aeroelastic boundaries of the system, namely, flutter velocity and flutter frequency, is examined for a beam undergoing span extension and retraction, from baseline span to 25% span extension and vice versa, respectively. Three points of interest are analyzed: at the start of the span morphing, at the mid-point of morphing, and just before the morphing process ends. The parametric analysis is carried out to determine the effect of varying critical parameters, such as the elastic axis location of the outboard wing section and adjoining spring torsional rigidity on the aeroelastic boundaries of the polymorphing wing.
Published: 2023
Full Text: View/download PDF

6. A Novel Reverse Hinge Spoiler for Flight Loads Control

Author: Rafic M. Ajaj and Kamal Djidjeli
Subjects: aerodynamic loads, reverse hinge spoiler, flow separation, CFD, Technology, Engineering design, TA174
Abstract: This paper presents the reverse hinge spoiler, a novel spoiler concept, for flight load control. The reverse hinge spoiler is a control surface mounted on the upper surface of the wing. Unlike conventional hinged spoilers that are hinged at their front and rotate forward toward the leading edge of the wing, the proposed spoiler concept is hinged at its rear and rotates backward toward the trailing edge of the wing. The aerodynamic performance of the proposed spoiler is compared and contrasted with that of a conventional hinged spoiler for different flight conditions and hinge locations using the two-dimensional Reynolds-Averaged Navier–Stokes (RANS) with the k-omega SST turbulence model-based computational fluid dynamic solver. The results show that the proposed spoiler results in a larger increase in drag and a sharper reduction in the lift for a wide range of spoiler angles and flight conditions. Reversing the spoiler is found to cause a higher adverse pressure gradient in front of the spoiler compared to a conventional spoiler, as it ‘traps’ more flow, thereby increasing drag and reducing lift.
Published: 2022
Full Text: View/download PDF

7. Some Applications of Coding Theory in the Projective Plane of Order Four

Author: Najm A. M. AL-Seraji and Hamza L. M. Ajaj
Subjects: projective plane, coding theory, incidence matrix., Science
Abstract: The main aim of this research is to introduce the relationship between the topic of coding theory and the projective plane of order four. The maximum value of size code M over the finite field of order four and an incidence matrix with the parameters, n (length of code), d (minimum distance of code) and e (error-correcting of code) have been constructed. Some examples and theorems have been given.
Published: 2019
Full Text: View/download PDF

8. On the Aeroelasticity of the Active Span and Passive Pitching Polymorphing Wing: A Parametric Study

Author: Zawar Haider, Rafic M. Ajaj, and Lakmal Seneviratne
Subjects: polymorphing, twist morphing, span morphing, aeroelasticity, flutter, Motor vehicles. Aeronautics. Astronautics, TL1-4050
Abstract: This paper presents an aeroelastic analysis of a polymorphing wing capable of active span extension and passive pitch variation. The wing is split into two segments: an inboard segment responsible for span extension/retraction and an outboard segment capable of pitch variation. The two segments are connected through an overlapping spar and a torsional spring. A finite element aeroelastic model is developed where the wing structure is discretized into Euler–Bernoulli beam elements and the aerodynamic loads are calculated using Theodorsen’s unsteady model. A comprehensive parametric analysis is carried out with and without span extension to analyze the effect of varying critical design parameters, such as elastic axis position of outboard section and torsional spring rigidity, and conditions for aeroelastic phenomena of flutter and divergence are studied. A gust load analysis is carried out to quantify the capability of the outboard wing passive twist mechanism to alleviate loads. Finally, a nonlinear analysis is carried out by replacing the linear torsional spring with a nonlinear cubic spring to study the effects of cubic hardening and softening on the aeroelasticity of the polymorphing wing.
Published: 2022
Full Text: View/download PDF

9. A Polymorphing Wing Capable of Span Extension and Variable Pitch

Author: Muhammed S. Parancheerivilakkathil, Zawar Haider, Rafic M. Ajaj, and Mohammadreza Amoozgar
Subjects: span morphing, variable pitch, flexible skin, UAVs, Motor vehicles. Aeronautics. Astronautics, TL1-4050
Abstract: This paper presents the development of a novel polymorphing wing capable of Active Span morphing And Passive Pitching (ASAPP) for small UAVs. The span of an ASAPP wing can be actively extended by up to 25% to enhance aerodynamic efficiency, whilst its pitch near the wingtip can be passively adjusted to alleviate gust loads. To integrate these two morphing mechanisms into one single wing design, each side of the wing is split into two segments (e.g., inboard and outboard segments). The inboard segment is used for span extension whilst the outboard segment is used for passive pitch. The inboard segment consists of a main spar that can translate in the spanwise direction. Flexible skin is used to cover the inboard segment and maintain its aerodynamic shape. The skin transfers the aerodynamic loads to the main spar through a number of ribs that can slide on the main spar through linear plain bearings. A linear actuator located within the fuselage is used for span morphing. The inboard and outboard segments are connected by an overlapping spar surrounded by a torsional spring. The overlapping spar is located ahead of the aerodynamic center of the outboard segment to facilitate passive pitch. The aero-structural design, analysis, and sizing of the ASAPP wing are detailed here. The study shows that the ASAPP wing can be superior to the baseline wing (without morphing) in terms of aerodynamic efficiency, especially when the deformation of the flexible skin is minimal. Moreover, the passive pitching near the wingtip can reduce the root loads significantly, minimizing the weight penalty usually associated with morphing.
Published: 2022
Full Text: View/download PDF

10. A Parametric Study on the Aeroelasticity of Flared Hinge Folding Wingtips

Author: Rafic M. Ajaj, Erick I. Saavedra Flores, Mohammadreza Amoozgar, and Jonathan E. Cooper
Subjects: folding wingtips, flared hinge, finite element method, aeroelasticity, structural nonlinearities, Motor vehicles. Aeronautics. Astronautics, TL1-4050
Abstract: This paper presents a parametric study on the aeroelasticity of cantilever wings equipped with Flared Hinge Folding Wingtips (FHFWTs). The finite element method is utilized to develop a computational, low-fidelity aeroelastic model. The wing structure is modelled using Euler–Bernoulli beam elements, and unsteady Theodorsen’s aerodynamic strip Theory is used for aerodynamic load predictions. The PK method is used to estimate the aeroelastic boundaries. The model is validated using three rectangular, cantilever wings whose properties are available in literature. Then, a rectangular, cantilever wing is used to study the effect of folding wingtips on the aeroelastic response and stability boundaries. Two scenarios are considered for the aeroelastic analysis. In the first scenario, the baseline, rectangular wing is split into inboard and outboard segments connected by a flared hinge that allows the outboard segment to fold. In the second scenario, a folding wingtip is added to the baseline wing. For both scenarios, the influence of fold angle, hinge-line angle (flare angle), hinge stiffness, tip mass and geometry are assessed. In addition, the load alleviation capability of FHFWT is evaluated when the wing encounters discrete (1-cosine) gusts. Finally, the hinge is assumed to exhibit cubic nonlinear behavior in torsion, and the effect of nonlinearity on the aeroelastic response is assessed and analyzed for three different cases.
Published: 2021
Full Text: View/download PDF

11. Similarity Analytic Solutions of a 3D-Fractal Nanofluid Uncoupled System Optimized by a Fractal Symmetric Tangent Function

Author: Dumitru Balean, Nadia M. G. Al-Saidi, Ahmed M. Ajaj, and Rabha W. Ibrahim
Subjects: Nanofluid, Fractal, Similarity (network science), Modeling and Simulation, Mathematical analysis, Tangent function, Software, Computer Science Applications, Mathematics
Published: 2022
Full Text: View/download PDF

12. FACTORS AFFECTING THE PREFERENCE OF POPULATION IN LOSING WEIGHT BY EITHER BARIATRIC SURGERIES OR CONSERVATIVE STRATEGIES IN SAUDI ARABIA

Author: Ghaida H. Alotaibi, Nada E. Algethami, Yousef M. Ajaj, Rahma A. Algethami, Tamer M. Abd Elrahman, and Raghad S. Aljuaid
Subjects: education.field_of_study, business.industry, Population, Medicine, education, business, Preference, Demography
Abstract: Objectives: To assess factors affecting Saudi population preference in losing weight either by bariatric surgeries or by conservative strategies. Methods: A cross sectional study was done using a self-administered questionnaire distributed online. Study was done on 518 participants (group 1) who did not prefer to undergo bariatric surgery and preferred conservative strategies in weight reduction and group 2 (84 participants) who preferred to undergo bariatric surgery. Results: Participants in group 1 and group 2 represented 86% and 14% of the sample. Group II had a significant higher percent of obese and per-obese individuals, who usually eat basic meals every day, who usually have soft drinks as beverages, who eat fast food for more than 2 times weekly, who had more than 6 attempts to lose weight in the last 5 years and who thought that their families would support their efforts in improving their food habits. Group II had a statistically significant higher percent of those who consider bariatric surgery as an effective tool for weight loss, who believed that they would lose more weight with bariatric surgery, and who believe that surgery will cause a drastic change in their lifestyle. Group 1 had a significant higher percent of those who eat fruit and vegetables every day, who reported always practicing physical activity during the entire year. Conclusion: Factors affecting the preference of weight loss were eating habits, physical activity, and attempt of dieting. An efficient health education programs about bariatric surgeries is needed to correct misconceptions regarding the surgery.
Published: 2021
Full Text: View/download PDF

13. Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins

Author: Nour M. Ajaj-ALKordy and Mohannad H. Alsaadi
Subjects: Medicine, Dentistry, RK1-715
Abstract: Background: Fractures of acrylic resin dentures are a common occurrence in clinical dentistry. The denture may be fractured accidentally when dropped or while in service in the mouth due to flexural fatigue. Objectives: The aim of this study was to compare the elastic modulus and the flexural strength between two heat-cured acrylic resins used in denture bases: a high-impact resin (Lucitone 199) and a traditional resin (Rodex). Materials and methods: Rectangular strips of Lucitone 199 and Rodex (10 samples each) were fabricated and stored in artificial saliva at 37 °C for 2 weeks. The specimens were subjected to a three-point flexural test. The data were statistically analysed with Student’s t-test (p ⩽ .05). Results: The high-impact acrylic resin had a lower elastic modulus (p = .000) and higher flexural strength (p = .001) compared to the traditional acrylic resin. Conclusion: Within the limitations of this study, it can be concluded that the high-impact acrylic resin is a suitable denture base material for patients with clinical fracture of the acrylic denture. Keywords: Denture, Acrylic resin, Fracture, High-impact, Elastic modulus, Flexural strength
Published: 2014
Full Text: View/download PDF

14. Gaia Early Data Release 3 The Gaia Catalogue of Nearby Stars

Author: Zoltan Balog, G. Tauran, Vincenzo Ripepi, Gerry Gilmore, M. Barros, Łukasz Wyrzykowski, Alberto Cellino, E. Poggio, P. Gavras, Simchon Faigler, Marc Audard, C. Nicolas, M. Vaillant, A. Mora, Paolo Tanga, Silvio Leccia, Despina Hatzidimitriou, A. Dapergolas, Eva Sciacca, Alberto Krone-Martins, N. Cheek, M. Hauser, Ulrike Heiter, S. Managau, L. Rohrbasser, Mathias Schultheis, E. Utrilla, Minia Manteiga, Marcella Marconi, Xavier Luri, F. De Angeli, Shay Zucker, Paolo Giacobbe, J. Juaristi Campillo, H. I. Siddiqui, J. Torra, F. X. Pineau, Roy Gomel, Thierry Morel, T. Cornez, Eric Gosset, Mario Gai, Jose M Hernandez, G. Giuffrida, A. de Torres, Laszlo Szabados, S. Ragaini, E. van Dillen, D. Semeux, Leanne P. Guy, R. Drimmel, L. M. Sarro, S. Voutsinas, Johannes Sahlmann, Damien Ségransan, S. Liao, Derek W. Morris, Jan Rybizki, André Moitinho, T. Roegiers, Bengt Edvardsson, Tristan Cantat-Gaudin, Martin Altmann, C. Turon, Laurent Chemin, K. Janßen, D. Garabato, Alejandra Recio-Blanco, Michał Pawlak, Lorenzo Rimoldini, Sergei A. Klioner, F. Torra, Carine Babusiaux, Alfred Castro-Ginard, G. Plum, Mariateresa Crosta, Iain A. Steele, A. Yoldas, Alex Lobel, J.-L. Bassilana, Harry Enke, Rosanna Sordo, Francesca Fragkoudi, F. De Luise, M. Bernet, Alessandro Sozzetti, M. Kontizas, Roberto Molinaro, C. Diener, S. Regibo, D. Barbato, T. Pauwels, R. E. de Souza, C. Fabricius, D. Souami, L. Martin Polo, M. Ramos-Lerate, Douglas J. Marshall, A. G. Butkevich, P. Madrero Pardo, P. Re Fiorentin, J. F. Le Campion, Jérôme Berthier, N. Tonello, Ummi Abbas, Y. Lebreton, M. Biermann, D. Munoz, N. Brouillet, David Teyssier, O. Vanel, P. A. Palicio, A. Jean-Antoine Piccolo, A. F. Lanza, Jesus Salgado, E. del Pozo, Antti Penttilä, R. Geyer, Ramachrisna Teixeira, L. Chaoul, Mike Smith, Rossella Cancelliere, J. M. Martín-Fleitas, D. Baines, M. Romero-Gómez, E. Anglada Varela, E. Livanou, X. Peñalosa Esteller, S. Diakite, Alberto Vecchiato, Thomas Wevers, Daniel Hestroffer, Sebastian L. Hidalgo, M. David, Angela Bragaglia, J. De Ridder, Mark Taylor, Roberto Morbidelli, A. Sagristà Sellés, Nigel Hambly, Arnaud Siebert, R. L. Smart, P. Burgess, Y. Le Fustec, Alessandro Bressan, H. Steidelmüller, Alberto Riva, H. E. Huckle, Morgan Fouesneau, N. Bauchet, P. Osborne, S. Marinoni, Krzysztof A. Rybicki, A. Masip, Laia Casamiquela, R. Messineo, A. Garofalo, Antonella Vallenari, R. Mor, Sahar Shahaf, P. de Laverny, G. Sadowski, Peter G. Jonker, A. Kochoska, F. Taris, A. F. Mulone, M. Ajaj, C. Ducourant, T. A. Lister, F. A. Jansen, Ruth Carballo, J. M. Carrasco, Tatiana Muraveva, W. van Reeven, P. Sartoretti, Jordi Portell, Andreas Korn, E. Salguero, Ana Ulla, P. Di Matteo, Coryn A. L. Bailer-Jones, J. Bakker, F. Riclet, G. Altavilla, Ulrich Bastian, P. Esquej, R. Buzzi, M. Segol, A. C. Lanzafame, L. Balaguer-Núñez, Beatrice Bucciarelli, C. Panem, E. Balbinot, T. Carlucci, Davide Massari, P. de Teodoro, Sébastien Lambert, M. I. Carnerero, Amina Helmi, F. Solitro, C. Robin, Carlos Dafonte, Tsevi Mazeh, A. Panahi, C. Fabre, Sergi Blanco-Cuaresma, Deborah Busonero, Maroussia Roelens, O. Marchal, Tomaz Zwitter, B. Holl, G. Holland, William Thuillot, Michael Davidson, E. Licata, Michele Bellazzini, Teresa Antoja, E. Szegedi-Elek, Francesca Figueras, Eric Slezak, Sergio Messina, N. Samaras, E. Poujoulet, Mark Cropper, A. Burlacu, R. Blomme, Elmé Breedt, Annie C. Robin, H. E. Delgado, Z. Kostrzewa-Rutkowska, Georges Kordopatis, Conny Aerts, L. Noval, Daniel Michalik, P. J. Richards, L. Karbevska, Grigori Fedorets, Maria Süveges, F. Crifo, J. Guiraud, D. Eappachen, K. Kruszyńska, Gisella Clementini, P. Yvard, Carme Jordi, L. Bramante, G. Busso, P. David, E. Fraile, Ugo Becciani, A. Lorca, Sanjeev Khanna, Alex Bombrun, Isabella Pagano, C. Dolding, A. M. Piersimoni, Paolo Montegriffo, A. Abreu Aramburu, Anthony G. A. Brown, Simon Hodgkin, Ennio Poretti, M. Fabrizio, I. Gonzalez-Santamaria, N. A. Walton, P. Panuzzo, Benoit Carry, Raphael Guerra, J. J. González-Vidal, T. Lebzelter, Nami Mowlavi, C. Barache, M. M. S. Marcos Santos, S. Cowell, Marco Castellani, J. J. Aguado, N. R. Millar, A. Baudesson-Stella, N. Leclerc, S. Bartolomé, J. Álvarez Cid-Fuentes, F. van Leeuwen, S. Bouquillon, Uwe Lammers, D. W. Evans, L. Eyer, M. van Leeuwen, A. Guerrier, J. González-Núñez, H. E. P. Lindstrøm, Miguel García-Torres, Ilaria Musella, L. Palaversa, W. Roux, W. Löffler, J.-B. Delisle, Dimitri Pourbaix, Timo Prusti, J. Osinde, M. Riello, G. Orrù, C. Crowley, Alessandra Mastrobuono-Battisti, Hector Canovas, D. L. Harrison, Y. Lasne, E. F. del Peloso, Laurent Galluccio, N. Hładczuk, T. Boch, Martin A. Barstow, László Molnár, Aldo Dell'Oro, C. Pagani, Krzysztof Nienartowicz, Stefano Bertone, Patrick Charlot, Eduard Masana, Elisabetta Caffau, N. Robichon, Luciana Bianchi, Federica Spoto, Felix Franke, J. L. Halbwachs, R. Gutiérrez-Sánchez, L. Pulone, Yassine Damerdji, Frédéric Arenou, Richard I. Anderson, Elena Pancino, David Hobbs, P. Castro Sampol, Yves Fremat, Pierre Kervella, C. Zurbach, Sofia Randich, Robert G. Mann, J. C. Segovia, Diego Bossini, D. Katz, Nicholas Rowell, P. Ramos, E. Racero, G. Gracia-Abril, R. Santoveña, R. Haigron, N. Unger, Enrique Solano, S. G. Baker, W. J. Cooper, F. Royer, S. Accart, George M. Seabroke, João Alves, Emese Plachy, Thomas Hilger, Pedro García-Lario, Gérard Jasniewicz, Kevin Benson, Christos Siopis, J. Souchay, Agnes Fienga, Giovanni Comoretto, F. Julbe, A. Hutton, Pierre Fernique, Céline Reylé, F. Pailler, Stefan Jordan, J. H. J. de Bruijne, C. A. Stephenson, E. Gerlach, Elisa Distefano, Karri Muinonen, Y. Viala, H. Zhao, L. Siltala, C. P. Murphy, Maria-Rosa L. Cioni, Andrea Chiavassa, D. Molina, J. Fernández-Hernández, G. Jevardat de Fombelle, Federico Marocco, Nicoletta Sanna, Alexey Mints, Juan Zorec, Ángel Gómez, I. Bellas-Velidis, M. G. Lattanzi, C. M. Raiteri, E. Brugaletta, Mikael Granvik, O. L. Creevey, Guy Rixon, Francois Mignard, P. M. Marrese, M. A. Álvarez, Caroline Soubiran, Rene Andrae, C. Ordénovic, A. Delgado, V. Sanchez Gimenez, J. Castañeda, D. Vicente, R. De March, A. Garcia-Gutierrez, M. Weiler, F. Thévenin, Lennart Lindegren, Isabelle Lecoeur-Taïbi, Jon Marchant, Monica Rainer, Alessandro Spagna, Andrej Prsa, M. Sarasso, Nicolas Rambaux, Paul J. McMillan, Ludovic Delchambre, M. Garcia-Reinaldos, M. Haywood, C. Fouron, S. Girona, Ministerio de Economía y Competitividad (España), Ministerio de Ciencia, Innovación y Universidades (España), Universidad de Barcelona, Xunta de Galicia, Generalitat de Catalunya, INAF - Osservatorio Astrofisico di Torino (OATo), Istituto Nazionale di Astrofisica (INAF), Univers, Transport, Interfaces, Nanostructures, Atmosphère et environnement, Molécules (UMR 6213) (UTINAM), Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université de Franche-Comté (UFC), Université Bourgogne Franche-Comté [COMUE] (UBFC)-Université Bourgogne Franche-Comté [COMUE] (UBFC), Institut de Planétologie et d'Astrophysique de Grenoble (IPAG), Centre National d'Études Spatiales [Toulouse] (CNES)-Observatoire des Sciences de l'Univers de Grenoble (OSUG ), Institut national des sciences de l'Univers (INSU - CNRS)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Université Grenoble Alpes (UGA)-Institut national des sciences de l'Univers (INSU - CNRS)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Université Grenoble Alpes (UGA), Galaxies, Etoiles, Physique, Instrumentation (GEPI), Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de Paris, Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Centre National de la Recherche Scientifique (CNRS), Joseph Louis LAGRANGE (LAGRANGE), Université Nice Sophia Antipolis (... - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de la Côte d'Azur, Université Côte d'Azur (UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS), Centre National d'Études Spatiales [Toulouse] (CNES), Laboratoire d'Astrophysique de Bordeaux [Pessac] (LAB), Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Astronomische Rechen-Institut [Heidelberg] (ARI), Zentrum für Astronomie der Universität Heidelberg (ZAH), Universität Heidelberg [Heidelberg]-Universität Heidelberg [Heidelberg], Systèmes de Référence Temps Espace (SYRTE), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS), Institut de Mécanique Céleste et de Calcul des Ephémérides (IMCCE), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Université de Lille-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS), Observatoire astronomique de Strasbourg (ObAS), Université de Strasbourg (UNISTRA)-Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS), Mésocentre de calcul (MESOCENTRE), Université de Franche-Comté (UFC), Centre de Données Astronomiques de Strasbourg, Partenaires INRAE, Géoazur (GEOAZUR 7329), Université Côte d'Azur (UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Institut de Recherche pour le Développement (IRD [France-Sud])-Centre National de la Recherche Scientifique (CNRS)-Observatoire de la Côte d'Azur, Université Côte d'Azur (UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA), Laboratoire Univers et Particules de Montpellier (LUPM), Centre National de la Recherche Scientifique (CNRS)-Université de Montpellier (UM)-Institut National de Physique Nucléaire et de Physique des Particules du CNRS (IN2P3)-Université Montpellier 2 - Sciences et Techniques (UM2), Laboratoire d'études spatiales et d'instrumentation en astrophysique (LESIA (UMR_8109)), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Université de Paris (UP), Institut de Physique de Rennes (IPR), Université de Rennes 1 (UR1), Université de Rennes (UNIV-RENNES)-Université de Rennes (UNIV-RENNES)-Centre National de la Recherche Scientifique (CNRS), Institut de recherche en astrophysique et planétologie (IRAP), Institut national des sciences de l'Univers (INSU - CNRS)-Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées-Université Fédérale Toulouse Midi-Pyrénées-Observatoire Midi-Pyrénées (OMP), Météo France-Centre National d'Études Spatiales [Toulouse] (CNES)-Université Fédérale Toulouse Midi-Pyrénées-Centre National de la Recherche Scientifique (CNRS)-Institut de Recherche pour le Développement (IRD)-Météo France-Centre National d'Études Spatiales [Toulouse] (CNES)-Centre National de la Recherche Scientifique (CNRS)-Institut de Recherche pour le Développement (IRD)-Centre National de la Recherche Scientifique (CNRS), THALES, Université de Namur [Namur] (UNamur), Institut d'Astrophysique de Paris (IAP), Institut national des sciences de l'Univers (INSU - CNRS)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS), Institut national des sciences de l'Univers (INSU - CNRS)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Université Grenoble Alpes (UGA)-Météo-France -Institut national des sciences de l'Univers (INSU - CNRS)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Université Grenoble Alpes (UGA)-Météo-France, Université Nice Sophia Antipolis (1965 - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS), Universität Heidelberg [Heidelberg] = Heidelberg University-Universität Heidelberg [Heidelberg] = Heidelberg University, Université de Strasbourg (UNISTRA)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS)-Institut de Recherche pour le Développement (IRD [France-Sud]), Institut National de Physique Nucléaire et de Physique des Particules du CNRS (IN2P3)-Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS), Laboratoire d'études spatiales et d'instrumentation en astrophysique = Laboratory of Space Studies and Instrumentation in Astrophysics (LESIA), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Université Paris Cité (UPCité), Université de Rennes (UR)-Centre National de la Recherche Scientifique (CNRS), Université Toulouse III - Paul Sabatier (UT3), Université de Toulouse (UT)-Université de Toulouse (UT)-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire Midi-Pyrénées (OMP), Institut de Recherche pour le Développement (IRD)-Université Toulouse III - Paul Sabatier (UT3), Université de Toulouse (UT)-Université de Toulouse (UT)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National d'Études Spatiales [Toulouse] (CNES)-Centre National de la Recherche Scientifique (CNRS)-Météo-France -Institut de Recherche pour le Développement (IRD)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National d'Études Spatiales [Toulouse] (CNES)-Centre National de la Recherche Scientifique (CNRS)-Météo-France -Centre National de la Recherche Scientifique (CNRS), THALES [France], Université Bourgogne Franche-Comté [COMUE] (UBFC)-Université Bourgogne Franche-Comté [COMUE] (UBFC)-Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS), Université Côte d'Azur (UCA)-Université Nice Sophia Antipolis (... - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Université Montpellier 2 - Sciences et Techniques (UM2)-Institut National de Physique Nucléaire et de Physique des Particules du CNRS (IN2P3)-Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS), Universidad de Cantabria, Gaia Collaboration, Planetary-system research, Department of Physics, Particle Physics and Astrophysics, Astronomy, and ITA
Subjects: trigonometric parallaxes, Solar neighborhood, Stars: luminosity function, mass function, Astronomy, Astrophysics, 01 natural sciences, luminosity function, mass function [Stars], Astronomi, astrofysik och kosmologi, luminosity: mass function [Stars], Astronomy, Astrophysics and Cosmology, MAIN-SEQUENCE, Hertzsprung-Russell-diagram, 010303 astronomy & astrophysics, Stars:low-mass brown-dwarfs, wide binaries, Physics, education.field_of_study, north galactic pole, Astrophysics::Instrumentation and Methods for Astrophysics, Astrometry, BROWN DWARF, Astrophysics - Solar and Stellar Astrophysics, mass function, NORTH GALACTIC POLE, Physical Sciences, symbols, CIRCULAR-VELOCITY CURVE, Halo, astro-ph.SR, Hertzsprung–Russell diagram, stars: luminosity function, astro-ph.GA, Posterior probability, Population, main-sequence, Luminosity-Function, FOS: Physical sciences, Mass-Function, Astronomy & Astrophysics, Computer Science::Digital Libraries, Photometry (optics), DWARF LUMINOSITY-FUNCTION, dwarf luminosity-function, sky-survey, symbols.namesake, Settore FIS/05 - Astronomia e Astrofisica, luminosity function [stars], low-mass [Stars], 0103 physical sciences, Stars: luminosity: mass function, Stars: low-mass, WHITE-DWARFS, education, Solar and Stellar Astrophysics (astro-ph.SR), brown dwarf, catalogs, astrometry, Hertzsprung-Russell and C-M diagrams, stars: low-mass, solar neighborhood, Astrophysics - Astrophysics of Galaxies, SKY-SURVEY, white-dwarfs, Science & Technology, 010308 nuclear & particles physics, Luminosity function, White dwarf, TRIGONOMETRIC PARALLAXES, Astronomy and Astrophysics, Low-mass, 115 Astronomy, Space science, WIDE BINARIES, Stars, Physics::History of Physics, 13. Climate action, Space and Planetary Science, Astrophysics of Galaxies (astro-ph.GA), solar-neighborhood, Catalogs, circular-velocity curve, [PHYS.ASTR]Physics [physics]/Astrophysics [astro-ph]
Abstract: Aims. We produce a clean and well-characterised catalogue of objects within 100 pc of the Sun from the Gaia Early Data Release 3. We characterise the catalogue through comparisons to the full data release, external catalogues, and simulations. We carry out a first analysis of the science that is possible with this sample to demonstrate its potential and best practices for its use., Methods. Theselection of objects within 100 pc from the full catalogue used selected training sets, machine-learning procedures, astrometric quantities, and solution quality indicators to determine a probability that the astrometric solution is reliable. The training set construction exploited the astrometric data, quality flags, and external photometry. For all candidates we calculated distance posterior probability densities using Bayesian procedures and mock catalogues to define priors. Any object with reliable astrometry and a non-zero probability of being within 100 pc is included in the catalogue., Results. We have produced a catalogue of 331 312 objects that we estimate contains at least 92% of stars of stellar type M9 within 100 pc of the Sun. We estimate that 9% of the stars in this catalogue probably lie outside 100 pc, but when the distance probability function is used, a correct treatment of this contamination is possible. We produced luminosity functions with a high signal-to-noise ratio for the main-sequence stars, giants, and white dwarfs. We examined in detail the Hyades cluster, the white dwarf population, and wide-binary systems and produced candidate lists for all three samples. We detected local manifestations of several streams, superclusters, and halo objects, in which we identified 12 members of Gaia Enceladus. We present the first direct parallaxes of five objects in multiple systems within 10 pc of the Sun., Conclusions. We provide the community with a large, well-characterised catalogue of objects in the solar neighbourhood. This is a primary benchmark for measuring and understanding fundamental parameters and descriptive functions in astronomy.
Published: 2021
Full Text: View/download PDF

15. Flight Dynamics of Transport Aircraft Equipped with Flared-Hinge Folding Wingtips

Author: Rafic M. Ajaj
Subjects: Physics, Folding (chemistry), Flight dynamics, business.industry, Hinge, Aerospace Engineering, Wing loading, Mechanics, Computational fluid dynamics, business, Aerodynamic derivatives
Abstract: This paper studies the influence of flared-hinge folding wingtips on the aerodynamic derivatives and flight dynamics of a narrow-body transport aircraft. In addition, the influence of fold angle, h...
Published: 2021
Full Text: View/download PDF

16. A compliant polymorphing wing for small UAVs

Author: Kamran A. Khan, Muhammed S. Parancheerivilakkathil, and Rafic M. Ajaj
Subjects: 0209 industrial biotechnology, Computer science, ComputingMethodologies_IMAGEPROCESSINGANDCOMPUTERVISION, Aerospace Engineering, Flexible skin, 02 engineering and technology, Chord morphing, UAVs, 01 natural sciences, GeneralLiterature_MISCELLANEOUS, 010305 fluids & plasmas, 020901 industrial engineering & automation, Camber morphing, Camber (aerodynamics), 0103 physical sciences, Spar, Motor vehicles. Aeronautics. Astronautics, ComputingMethodologies_COMPUTERGRAPHICS, Chord (aeronautics), Wing, business.industry, Mechanical Engineering, TL1-4050, Aerodynamics, Structural engineering, Compliant structures, Rack and pinion, Morphing, Fuselage, business
Abstract: This paper presents the development of a novel compliant polymorphing wing capable of chord and camber morphing for small UAVs. The morphing wing can achieve up to 10% chord extension and ±20° camber changes. The design, modelling, sizing, manufacturing and mechanical testing of the wing are detailed. The polymorphing wing consists of one continuous front spar fixed to the fuselage and a rear spar on each side of the wing. Each rear spar can translate in the chordwise direction (chord morphing) and rotate around itself (camber morphing). A flexible elastomeric latex sheet is used as the skin to cover the wing and maintain its aerodynamic shape whilst allowing morphing. The loads from the skin are transferred to the spars using the compliant cellular ribs that support the flexible skin and facilitate morphing. Pre-tensioning is applied to the skin to minimize wrinkling when subject to aerodynamic and actuation loads. A rack and pinion actuation system, powered by stepper motors, is used for morphing. Aero-structural design, analysis and sizing are conducted. Performance comparison between the polymorphing wing and the baseline wing (non-morphing) shows that chord morphing improves aerodynamic efficiency at low angles of attack while camber morphing improves efficiency at high angles of attack.
Published: 2020
Full Text: View/download PDF

17. Characterization of a Test for Invasive Breast Cancer Using X-ray Diffraction of Hair - Results of a Clinical Trial

Author: Gary L. Corino, Peter W. French, Myungae Lee, Mariam M. Ajaj, Joseph Haklani, Dharmica A.H. Mistry, Kevin Phan, and Phillip G. Yuile
Subjects: Neoplasms. Tumors. Oncology. Including cancer and carcinogens, RC254-282
Abstract: Objective: To assess the performance of a test for breast cancer utilizing synchrotron x-ray diffraction analysis of scalp hair from women undergoing diagnostic radiology assessment. Design and Setting: A double-blinded clinical trial of women who attended diagnostic radiology clinics in Australia. Patients: 1796 women referred for diagnostic radiology, with no previous history of cancer. Main Outcome Measures: Sensitivity, specificity and accuracy of the hair test analysis compared to the gold standard of imaging followed by biopsy where indicated. Results: The hair-based assay had an overall accuracy of >77% and a negative predictive value of 99%. For all women, the sensitivity of both mammography and x-ray diffraction alone was 64%, but when used together the sensitivity rose to 86%. The sensitivity of the hair test for women under the age of 70 was 74%. Conclusion: In this large population trial the association between the presence of breast cancer and an altered hair fibre X-ray diffraction pattern previously reported has been confirmed. It appears that mammography and X-ray diffraction of hair detect different populations of breast cancers, and are synergistic when used together.
Published: 2009

18. FACTORS AFFECTING THE PREFERENCE OF POPULATION IN LOSING WEIGHT BY EITHER BARIATRIC SURGERIES OR CONSERVATIVE STRATEGIES IN SAUDI ARABIA

Author: Tamer M. Abd Elrahman, Nada E. Algethami, Rahma A. Algethami, and Raghad S. Aljuaid , Ghaida H. Alotaibi and Yousef M. Ajaj
Subjects: Bariatric Conservative Factors Population Preference Saudi
Abstract: Objectives:To assess factors affecting Saudi population preference in losing weight either by bariatric surgeries or by conservative strategies. Methods:A cross sectional study was done using a self-administered questionnaire distributed online. Study was done on 518 participants (group 1) who did not prefer to undergo bariatric surgery and preferred conservative strategies in weight reduction and group 2 (84 participants) who preferred to undergo bariatric surgery. Results:Participants in group 1 and group 2 represented 86% and 14% of the sample. Group II had a significant higher percent of obese and per-obese individuals, who usually eat basic meals every day, who usually have soft drinks as beverages, who eat fast food for more than 2 times weekly, who had more than 6 attempts to lose weight in the last 5 years and who thought that their families would support their efforts in improving their food habits. Group II had a statistically significant higher percent of those who consider bariatric surgery as an effective tool for weight loss, who believed that they would lose more weight with bariatric surgery, and who believe that surgery will cause a drastic change in their lifestyle. Group 1 had a significant higher percent of those who eat fruit and vegetables every day, who reported always practicing physical activity during the entire year. Conclusion:Factors affecting the preference of weight loss were eating habits, physical activity, and attempt of dieting. An efficient health education programs about bariatric surgeries is needed to correct misconceptions regarding the surgery.&nbsp
Published: 2021
Full Text: View/download PDF

19. Gaia Early Data Release 3: Updated radial velocities from Gaia DR2

Author: Eric Gosset, Yassine Damerdji, Laurent Chemin, D. Katz, M. Ajaj, K. Janßen, Y. Frémat, Teresa Antoja, R. Blomme, C. Dolding, D. Teyssier, C. Fabricius, F. Crifo, Tomaž Zwitter, Mark Cropper, Alessandra Mastrobuono-Battisti, Leanne P. Guy, N. Brouillet, G. Plum, K. Benson, Alex Lobel, Y. Viala, R. Haigron, O. Marchal, Mike Smith, A. Jean-Antoine, Stephen Baker, C. Allende Prieto, Nigel Hambly, H. Huckle, Frédéric Thévenin, Elisabetta Caffau, P. Sartoretti, Pasquale Panuzzo, F. Royer, George M. Seabroke, A. Guerrier, Gérard Jasniewicz, N. Samaras, M. David, O. Vanel, N. Leclerc, Caroline Soubiran, Ministerio de Ciencia, Innovación y Universidades (España), Universidad de Barcelona, and European Commission
Subjects: Bright star, FOS: Physical sciences, Binary number, Techniques: spectroscopic, Instrumentation: spectrographs, Astrophysics, 01 natural sciences, spectroscopic [Techniques], instruments [Space vehicles], 0103 physical sciences, Space vehicles: instruments, spectrographs [Instrumentation], Instrumentation and Methods for Astrophysics (astro-ph.IM), 010303 astronomy & astrophysics, Solar and Stellar Astrophysics (astro-ph.SR), Physics, radial velocities [Techniques], 010308 nuclear & particles physics, Astronomy and Astrophysics, Astrometry, Astrophysics - Astrophysics of Galaxies, Radial velocity, Stars, Astrophysics - Solar and Stellar Astrophysics, Space and Planetary Science, Astrophysics of Galaxies (astro-ph.GA), Techniques: radial velocities, Astrophysics - Instrumentation and Methods for Astrophysics, Data release
Abstract: Seabroke, G. M., et al., [Context] Gaia's Early Third Data Release (EDR3) does not contain new radial velocities because these will be published in Gaia's full third data release (DR3), expected in the first half of 2022. To maximise the usefulness of EDR3, Gaia's second data release (DR2) sources (with radial velocities) are matched to EDR3 sources to allow their DR2 radial velocities to also be included in EDR3. This presents two considerations: (i) a list of 70 365 sources with potentially contaminated DR2 radial velocities has been published; and (ii) EDR3 is based on a new astrometric solution and a new source list, which means sources in DR2 may not be in EDR3. [Aims] The two aims of this work are: (i) investigate the list in order to improve the DR2 radial velocities being included in EDR3 and to avoid false-positive hypervelocity candidates; and (ii) match the DR2 sources (with radial velocities) to EDR3 sources. [Methods] Thetwo methods of this work are: (i) unpublished, preliminary DR3 radial velocities of sources on the list, and high-velocity stars not on the list, are compared with their DR2 radial velocities to identify and remove contaminated DR2 radial velocities from EDR3; and (ii) proper motions and epoch position propagation is used to attempt to match all sources with radial velocities in DR2 to EDR3 sources. The comparison of DR2 and DR3 radial velocities is used to resolve match ambiguities. [Results] EDR3 contains 7 209 831 sources with a DR2 radial velocity, which is 99.8% of sources with a radial velocity in DR2 (7 224 631). 14 800 radial velocities from DR2 are not propagated to any EDR3 sources because (i) 3871 from the list are found to either not have a DR3 radial velocity or it differs significantly from its DR2 value, and five high-velocity stars not on the list are confirmed to have contaminated radial velocities, in one case because of contamination from the non-overlapping Radial Velocity Spectrometer windows of a nearby, bright star; and (ii) 10 924 DR2 sources could not be satisfactorily matched to any EDR3 sources, so their DR2 radial velocities are also missing from EDR3. [Conclusions] The reliability of radial velocities in EDR3 has improved compared to DR2 because the update removes a small fraction of erroneous radial velocities (0.05% of DR2 radial velocities and 5.5% of the list). Lessons learnt from EDR3 (e.g. bright star contamination) will improve the radial velocities in future Gaia data releases. The main reason for radial velocities from DR2 not propagating to EDR3 is not related to DR2 radial velocity quality. It is because the DR2 astrometry is based on one component of close binary pairs, while EDR3 astrometry is based on the other component, which prevents these sources from being unambiguously matched., This work was supported by the Spanish Ministry of Science, Innovation and University (MICIU/FEDER, UE) through grants RTI2018-095076-B-C21, ESP2016-80079-C2-1-R, and the Institute of Cosmos Sciences University of Barcelona (ICCUB, Unidad de Excelencia ‘María de Maeztu’) through grants MDM-2014-0369 and CEX2019-000918-M. T.A. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska Curie grant agreement no. 745617 and from the Ramon y Cajal Fellowship RYC2018-025968-I. The Digitized Sky Surveys were produced at the Space Telescope Science Institute under US Government grant NAG W-2166.
Published: 2021

20. A Parametric Study on the Aeroelasticity of Flared Hinge Folding Wingtips

Author: Erick I. Saavedra Flores, Mohammadreza Amoozgar, Jonathan E. Cooper, and Rafic M. Ajaj
Subjects: Physics, Cantilever, Wing, business.industry, flared hinge, structural nonlinearities, finite element method, Hinge, Aerospace Engineering, Torsion (mechanics), TL1-4050, Aerodynamics, Structural engineering, Aeroelasticity, Finite element method, folding wingtips, aeroelasticity, business, Beam (structure), Motor vehicles. Aeronautics. Astronautics
Abstract: This paper presents a parametric study on the aeroelasticity of cantilever wings equipped with Flared Hinge Folding Wingtips (FHFWTs). The finite element method is utilized to develop a computational, low-fidelity aeroelastic model. The wing structure is modelled using Euler–Bernoulli beam elements, and unsteady Theodorsen’s aerodynamic strip Theory is used for aerodynamic load predictions. The PK method is used to estimate the aeroelastic boundaries. The model is validated using three rectangular, cantilever wings whose properties are available in literature. Then, a rectangular, cantilever wing is used to study the effect of folding wingtips on the aeroelastic response and stability boundaries. Two scenarios are considered for the aeroelastic analysis. In the first scenario, the baseline, rectangular wing is split into inboard and outboard segments connected by a flared hinge that allows the outboard segment to fold. In the second scenario, a folding wingtip is added to the baseline wing. For both scenarios, the influence of fold angle, hinge-line angle (flare angle), hinge stiffness, tip mass and geometry are assessed. In addition, the load alleviation capability of FHFWT is evaluated when the wing encounters discrete (1-cosine) gusts. Finally, the hinge is assumed to exhibit cubic nonlinear behavior in torsion, and the effect of nonlinearity on the aeroelastic response is assessed and analyzed for three different cases.
Published: 2021

21. The Galactic Anticentre

Author: Vincenzo Ripepi, A. de Torres, Annie C. Robin, Mariateresa Crosta, C. Diener, L. Noval, Daniel Michalik, P. J. Richards, L. Karbevska, K. Kruszyńska, E. Fraile, André Moitinho, Michał Pawlak, P. Panuzzo, M. Riello, Benoit Carry, A. Yoldas, Harry Enke, N. Tonello, P. Gavras, M. Vaillant, Rosanna Sordo, E. del Pozo, Lorenzo Rimoldini, M. Bernet, G. Orrù, W. van Reeven, J. M. Martín-Fleitas, S. Diakite, P. Burgess, P. Osborne, Derek W. Morris, M. I. Carnerero, Amina Helmi, Mike Smith, Iain A. Steele, Alessandro Sozzetti, M. Kontizas, A. Sagristà Sellés, Roberto Molinaro, B. Holl, D. Baines, D. Molina, J. Fernández-Hernández, S. Marinoni, Michele Bellazzini, Maria Süveges, Teresa Antoja, D. Barbato, Uwe Lammers, Isabella Pagano, Davide Massari, G. Plum, P. Ramos, G. Jevardat de Fombelle, M. Biermann, C. Crowley, Mathias Schultheis, D. W. Evans, P. A. Palicio, Paolo Montegriffo, Ramachrisna Teixeira, R. Blomme, Elmé Breedt, T. A. Lister, F. A. Jansen, Ruth Carballo, Marcella Marconi, A. Abreu Aramburu, J. M. Carrasco, F. Royer, S. Accart, A. Burlacu, S. Regibo, Andrej Prsa, M. Sarasso, Nicolas Rambaux, A. F. Mulone, Ana Ulla, Eric Gosset, Alessandra Mastrobuono-Battisti, George M. Seabroke, H. E. Delgado, Federico Marocco, C. Nicolas, T. Lebzelter, Nami Mowlavi, C. Barache, Nicoletta Sanna, G. Gracia-Abril, R. Santoveña, R. Haigron, N. Unger, Silvio Leccia, A. Jean-Antoine Piccolo, A. F. Lanza, Alberto Vecchiato, Thomas Wevers, F. Figueras, G. Busso, C. Fabre, P. Di Matteo, F. Riclet, F. Solitro, Eric Slezak, N. Samaras, João Alves, Emese Plachy, Timo Prusti, F. van Leeuwen, J. Osinde, O. Marchal, M. Ajaj, C. Ducourant, Tatiana Muraveva, Shay Zucker, H. Steidelmüller, Alberto Riva, D. Semeux, N. Cheek, Laurent Galluccio, Martin A. Barstow, Alex Bombrun, S. Liao, M. van Leeuwen, R. E. de Souza, P. de Laverny, T. Roegiers, Paul J. McMillan, G. Holland, Alexey Mints, G. Giuffrida, L. M. Sarro, Juan Zorec, G. Sadowski, P. Yvard, Carme Jordi, J. L. Halbwachs, Laurent Chemin, Ludovic Delchambre, M. Garcia-Reinaldos, Ugo Becciani, Diego Bossini, Ángel Gómez, Sergi Blanco-Cuaresma, Rossella Cancelliere, C. Fabricius, J. De Ridder, L. Eyer, L. Pulone, Simon Hodgkin, Ennio Poretti, F. De Angeli, M. Haywood, E. Anglada Varela, Antonella Vallenari, F. X. Pineau, D. Garabato, A. Guerrier, H. E. P. Lindstrøm, Thomas Hilger, I. Bellas-Velidis, Frédéric Arenou, Paolo Giacobbe, Ilaria Musella, Tristan Cantat-Gaudin, L. Palaversa, Pedro García-Lario, David Hobbs, C. Turon, E. Balbinot, P. de Teodoro, Sébastien Lambert, D. Katz, Angela Bragaglia, Anthony G. A. Brown, Paolo Tanga, P. Castro Sampol, J. C. Segovia, Alejandra Recio-Blanco, Yves Fremat, Jon Marchant, Jose M Hernandez, S. Ragaini, Sofia Randich, P. Re Fiorentin, J. F. Le Campion, Gisella Clementini, M. Segol, P. David, R. Drimmel, F. Crifo, J. Guiraud, M. David, R. L. Smart, M. Fabrizio, I. Gonzalez-Santamaria, D. Eappachen, M. G. Lattanzi, Miguel García-Torres, Andreas Korn, S. Voutsinas, László Molnár, Simchon Faigler, A. Mora, Nicholas Rowell, Antti Penttilä, R. Geyer, Sanjeev Khanna, Aldo Dell'Oro, H. E. Huckle, C. Dolding, N. Leclerc, Monica Rainer, R. Mor, J. Bakker, Maroussia Roelens, Douglas J. Marshall, A. G. Butkevich, Nigel Hambly, A. Masip, Laia Casamiquela, R. Messineo, Martin Altmann, A. M. Piersimoni, Alessandro Spagna, Gerry Gilmore, Stefano Bertone, Patrick Charlot, O. Vanel, Daniel Hestroffer, Marco Castellani, Sebastian L. Hidalgo, W. Roux, Łukasz Wyrzykowski, Krzysztof A. Rybicki, M. M. S. Marcos Santos, Raphael Guerra, Alberto Cellino, E. Poggio, Gérard Jasniewicz, J. J. González-Vidal, S. Cowell, Peter G. Jonker, C. M. Raiteri, S. Bartolomé, J. Álvarez Cid-Fuentes, Elisabetta Caffau, J. J. Aguado, N. R. Millar, Ulrike Heiter, Federica Spoto, Felix Franke, A. Baudesson-Stella, M. Barros, Tsevi Mazeh, A. Panahi, E. Brugaletta, R. Buzzi, Elena Pancino, G. Altavilla, E. Racero, Enrique Solano, Mikael Granvik, Minia Manteiga, C. Robin, Tomaz Zwitter, Deborah Busonero, Alberto Krone-Martins, Marc Audard, Kevin Benson, Christos Siopis, L. Balaguer-Núñez, C. A. L. Bailer-Jones, E. Poujoulet, O. L. Creevey, E. Szegedi-Elek, C. Fouron, Michael Davidson, E. Licata, Despina Hatzidimitriou, Mark Cropper, Z. Kostrzewa-Rutkowska, S. Managau, A. Dapergolas, Sergio Messina, Laszlo Szabados, H. I. Siddiqui, W. Löffler, Mario Gai, J.-B. Delisle, Leanne P. Guy, S. G. Baker, W. J. Cooper, Alfred Castro-Ginard, Conny Aerts, A. Lorca, Xavier Luri, Damien Ségransan, Grigori Fedorets, A. Garofalo, J. Juaristi Campillo, F. De Luise, F. Pailler, F. Taris, L. Bramante, Thierry Morel, T. Cornez, L. Martin Polo, M. Ramos-Lerate, Jordi Portell, E. Salguero, Sergei A. Klioner, K. Janßen, Ulrich Bastian, Stefan Jordan, P. Esquej, A. C. Lanzafame, Beatrice Bucciarelli, C. Panem, Y. Lebreton, Carlos Dafonte, S. Girona, D. Munoz, Dimitri Pourbaix, William Thuillot, J. H. J. de Bruijne, N. Brouillet, L. Chaoul, F. Torra, Alex Lobel, J.-L. Bassilana, Francesca Fragkoudi, M. Romero-Gómez, C. A. Stephenson, T. Pauwels, Eva Sciacca, Alessandro Bressan, Morgan Fouesneau, E. Livanou, E. Gerlach, X. Peñalosa Esteller, Roberto Morbidelli, L. Rohrbasser, Johannes Sahlmann, Elisa Distefano, P. Sartoretti, Karri Muinonen, Zoltan Balog, Y. Viala, J. Torra, H. Zhao, L. Siltala, G. Tauran, D. Souami, P. Madrero Pardo, David Teyssier, Jesus Salgado, J. Souchay, C. P. Murphy, Maria-Rosa L. Cioni, N. A. Walton, S. Bouquillon, Andrea Chiavassa, Agnes Fienga, Giovanni Comoretto, F. Julbe, A. Hutton, Yassine Damerdji, Richard I. Anderson, Pierre Fernique, Céline Reylé, M. Hauser, E. Utrilla, Pierre Kervella, C. Zurbach, Robert G. Mann, Ummi Abbas, Hector Canovas, D. L. Harrison, Y. Lasne, Mark Taylor, Y. Le Fustec, E. F. del Peloso, N. Bauchet, E. van Dillen, Jan Rybizki, N. Hładczuk, T. Boch, J. González-Núñez, Carine Babusiaux, C. Pagani, Krzysztof Nienartowicz, Eduard Masana, G. Kordopatis, N. Robichon, Luciana Bianchi, R. Gutiérrez-Sánchez, Arnaud Siebert, A. Kochoska, T. Carlucci, Jérôme Berthier, J. Castañeda, D. Vicente, R. De March, A. Garcia-Gutierrez, M. Weiler, F. Thévenin, Lennart Lindegren, Isabelle Lecoeur-Taïbi, Guy Rixon, Francois Mignard, P. M. Marrese, M. A. Álvarez, Caroline Soubiran, Rene Andrae, C. Ordénovic, A. Delgado, V. Sanchez Gimenez, Ministerio de Economía y Competitividad (España), Ministerio de Ciencia, Innovación y Universidades (España), Universidad de Barcelona, Xunta de Galicia, European Commission, Centros de Excelencia Severo Ochoa, BARCELONA SUPERCOMPUTING CENTER (BSC), SEV2015-0493, Krone Martins, A. [0000-0002-2308-6623], McMillan, P. [0000-0002-8861-2620], Carrasco Martínez, J. P. [0000-0002-3029-5853], Sozzetti, A. [0000-0002-7504-365X], Unidad de Excelencia Científica María de Maeztu Centro de Astrobiología del Instituto Nacional de Técnica Aeroespacial y CSIC, MINECO/ICTI2013-2016/MDM-2014-0369, Centrode Excelencia Científica Instituto de Ciencias del Cosmos Universidad de Barcelona, MINECO/ICTI2013-2016/SEV2015-0493, Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), National Natural Science Foundation of China (NSFC), Estonian Ministry of Education and Research, Centre National D'Etudes Spatiales (CNES), Agence Nationale de la Recherche (ANR), Centre National de la Recherche Scientifique (CNRS), European Commission (EC), European Research Council (ERC), Institut des Sciences de l'Univers (INSU), Institut National Polytechnique (INP), Institut National de Physique nucleaire et de Physique des Particules (IN2P3), Deutsches Zentrum für Luft- und Raumfahrt (DLR), Hungarian Academy of Sciences, Hungarian National Research, Development, and Innovation Office (NKFIH), Science Foundation Ireland (SFI), Israel Science Foundation (ISF), Agenzia Spaziale Italiana (ASI), Italian Istituto Nazionale di Astrofisica (INAF), Netherlands Organisation for Scientific Research (NWO), Polish National Science Centre, Ministry of Science and Higher Education (MNiSW), Fundacao para a Ciencia e a Tecnologia (FCT), Slovenian Research Agency, Agencia Estatal de Investigación (AEI), Generalitat de Catalunya, United Kingdom Science and Technology Facilities Council (STFC), United Kingdom Space Agency (UKSA), Gaia Collaboration, Universidad de Cantabria, Astronomy, Kapteyn Astronomical Institute, Institut de Ciencies del Cosmos (ICCUB), Universitat de Barcelona (UB), Joseph Louis LAGRANGE (LAGRANGE), Université Côte d'Azur (UCA)-Université Nice Sophia Antipolis (... - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Kapteyn Astronomical Institute [Groningen], University of Groningen [Groningen], INAF - Osservatorio Astronomico di Padova (OAPD), Istituto Nazionale di Astrofisica (INAF), Institut de recherches sur la catalyse et l'environnement de Lyon (IRCELYON), Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Université de Lyon-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS), M2A 2021, Laboratoire d'Astrophysique de Bordeaux [Pessac] (LAB), Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Laboratoire d'études spatiales et d'instrumentation en astrophysique (LESIA (UMR_8109)), Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de Paris, Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Université de Paris (UP), Institut de Physique de Rennes (IPR), Université de Rennes 1 (UR1), Université de Rennes (UNIV-RENNES)-Université de Rennes (UNIV-RENNES)-Centre National de la Recherche Scientifique (CNRS), Planetary-system research, Department of Physics, Particle Physics and Astrophysics, Université Nice Sophia Antipolis (1965 - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS), Laboratoire d'études spatiales et d'instrumentation en astrophysique = Laboratory of Space Studies and Instrumentation in Astrophysics (LESIA), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Université Paris Cité (UPCité), Université de Rennes (UR)-Centre National de la Recherche Scientifique (CNRS), Université Nice Sophia Antipolis (... - 2019) (UNS), and Université Côte d'Azur (UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS)
Subjects: trigonometric parallaxes, SOLAR NEIGHBORHOOD, Astronomy, SAGITTARIUS DWARF GALAXY, Astrophysics, 01 natural sciences, sagittarius dwarf galaxy, 010303 astronomy & astrophysics, Physics, [SDU.ASTR]Sciences of the Universe [physics]/Astrophysics [astro-ph], solar neighborhood, Astrophysics::Instrumentation and Methods for Astrophysics, Astrometry, Gelexy: kinematics and dynamics, Kinematics and Dynamics, Open clusters and asssociations: individual: Berkeley 29, sky survey, Disk, Physical Sciences, kinematics and dynamics [Gelexy], old open clusters, MILKY-WAY, Astrophysics::Earth and Planetary Astrophysics, open clusters and associations: individual: Berkeley 29, Galaxy: kinematics and dynamics, disk [Galaxy], individual: Berkeley 29 [open clusters and associations], Astrometria, Berkeley 29, EXPLORING HALO SUBSTRUCTURE, LOCAL KINEMATICS, Milky Way, FOS: Physical sciences, Open Clusters and Associations, Individual, exploring halo substructure, Astrophysics::Cosmology and Extragalactic Astrophysics, Astronomy & Astrophysics, Computer Science::Digital Libraries, stellar structure, Galaxy: disk, Open clusters and associations: individual: Saurer 1, Galactic halo, Halo, Settore FIS/05 - Astronomia e Astrofisica, individual: Berkeley 29 [Open clusters and asssociations], 0103 physical sciences, distances [stars], halo [Galaxy], Disc, Stars: distances, milky-way, Saurer 1, Astrophysics::Galaxy Astrophysics, canis-major, Science & Technology, 010308 nuclear & particles physics, TRIGONOMETRIC PARALLAXES, Galaxy: halo, stars: distances, open clusters and associations: individual: Saurer 1, Astrophysics - Astrophysics of Galaxies, Astronomy and Astrophysics, Galactic plane, kinematics and dynamics [Galaxy], 115 Astronomy, Space science, CANIS-MAJOR, Stars, Galaxy, Physics::History of Physics, Estels, individual: Saurer 1 [open clusters and associations], Distances, local kinematics, OLD OPEN CLUSTERS, Space and Planetary Science, Astrophysics of Galaxies (astro-ph.GA), SKY SURVEY, Open cluster, STELLAR STRUCTURE
Abstract: Aims. We aim to demonstrate the scientific potential of the Gaia Early Data Release 3 (EDR3) for the study of different aspects of the Milky Way structure and evolution and we provide, at the same time, a description of several practical aspects of the data and examples of their usage., Methods. We used astrometric positions, proper motions, parallaxes, and photometry from EDR3 to select different populations and components and to calculate the distances and velocities in the direction of the anticentre. In this direction, the Gaia astrometric data alone enable the calculation of the vertical and azimuthal velocities; also, the extinction is relatively low compared to other directions in the Galactic plane. We then explore the disturbances of the current disc, the spatial and kinematical distributions of early accreted versus in situ stars, the structures in the outer parts of the disc, and the orbits of open clusters Berkeley 29 and Saurer 1., Results. With the improved astrometry and photometry of EDR3, we find that: (i) the dynamics of the Galactic disc are very complex with oscillations in the median rotation and vertical velocities as a function of radius, vertical asymmetries, and new correlations, including a bimodality with disc stars with large angular momentum moving vertically upwards from below the plane, and disc stars with slightly lower angular momentum moving preferentially downwards; (ii) we resolve the kinematic substructure (diagonal ridges) in the outer parts of the disc for the first time; (iii) the red sequence that has been associated with the proto-Galactic disc that was present at the time of the merger with Gaia-Enceladus-Sausage is currently radially concentrated up to around 14 kpc, while the blue sequence that has been associated with debris of the satellite extends beyond that; (iv) there are density structures in the outer disc, both above and below the plane, most probably related to Monoceros, the Anticentre Stream, and TriAnd, for which the Gaia data allow an exhaustive selection of candidate member stars and dynamical study; and (v) the open clusters Berkeley 29 and Saurer 1, despite being located at large distances from the Galactic centre, are on nearly circular disc-like orbits., Conclusions. Even with our simple preliminary exploration of the Gaia EDR3, we demonstrate how, once again, these data from the European Space Agency are crucial for our understanding of the different pieces of our Galaxy and their connection to its global structure and history.
Published: 2021
Full Text: View/download PDF

22. Gaia early data release 3: summary of the contents and survey properties (Corrigendum)

Author: Mathias Schultheis, Marcella Marconi, N. Robichon, Luciana Bianchi, F. Crifo, J. Guiraud, D. Eappachen, R. Gutiérrez-Sánchez, Sanjeev Khanna, A. M. Piersimoni, Raphael Guerra, J. J. González-Vidal, J. J. Aguado, N. R. Millar, A. Baudesson-Stella, Tristan Cantat-Gaudin, Alejandra Recio-Blanco, Ummi Abbas, Francesca Figueras, R. Blomme, Elmé Breedt, G. Busso, A. Jean-Antoine Piccolo, Gerry Gilmore, A. Panahi, S. Messina, C. Babusiaux, Łukasz Wyrzykowski, Mark Taylor, Alex Bombrun, M. Barros, M. Riello, M. Ajaj, C. Ducourant, Tatiana Muraveva, Alberto Cellino, E. Poggio, Y. Le Fustec, C. P. Murphy, Maria-Rosa L. Cioni, Hector Canovas, D. L. Harrison, Y. Lasne, Elena Pancino, N. Bauchet, G. Orrù, Sergi Blanco-Cuaresma, Simon Hodgkin, Ennio Poretti, A. F. Lanza, Alberto Vecchiato, Thomas Wevers, Andrea Chiavassa, E. Szegedi-Elek, A. G. A. Brown, Laszlo Szabados, A. Masip, Laia Casamiquela, R. Messineo, C. Crowley, Alessandra Mastrobuono-Battisti, E. Poujoulet, Zoltan Balog, L. Eyer, A. Guerrier, H. E. P. Lindstrøm, Ilaria Musella, Laurent Galluccio, Martin A. Barstow, Aldo Dell'Oro, Mark Cropper, Z. Kostrzewa-Rutkowska, Angela Bragaglia, Arnaud Siebert, Damien Ségransan, A. Kochoska, J. L. Halbwachs, E. F. del Peloso, N. Hładczuk, F. Pailler, Stefan Jordan, Stefano Bertone, L. Pulone, Frédéric Arenou, Patrick Charlot, David Hobbs, P. Castro Sampol, Yves Fremat, Sofia Randich, Marc Audard, Despina Hatzidimitriou, A. Dapergolas, L. Palaversa, W. van Reeven, M. Hauser, E. Utrilla, Georges Kordopatis, Sergei A. Klioner, Alex Lobel, J.-L. Bassilana, G. Tauran, T. Prusti, H. Steidelmüller, Alberto Riva, Diego Bossini, Maria Süveges, Isabella Pagano, J. H. J. de Bruijne, Elisabetta Caffau, Federica Spoto, Felix Franke, T. Boch, M. I. Carnerero, T. Carlucci, Grigori Fedorets, J. Castañeda, W. Löffler, Enrique Solano, Paolo Montegriffo, A. Abreu Aramburu, T. Lebzelter, Nami Mowlavi, C. Barache, C. A. Stephenson, A. Lorca, L. Bramante, Amina Helmi, J.-B. Delisle, B. Holl, D. Molina, J. Fernández-Hernández, G. Jevardat de Fombelle, F. van Leeuwen, C. Robin, D. Katz, E. Gerlach, Elisa Distefano, Michele Bellazzini, P. de Laverny, G. Sadowski, Tomaz Zwitter, A. Burlacu, Teresa Antoja, Rossella Cancelliere, F. Torra, C. Pagani, Annie C. Robin, Johannes Sahlmann, Karri Muinonen, Eva Sciacca, D. Vicente, Krzysztof Nienartowicz, A. F. Mulone, Shay Zucker, Nicholas Rowell, H. E. Delgado, Dimitri Pourbaix, G. Giuffrida, H. E. Huckle, Federico Marocco, L. Noval, Daniel Michalik, P. J. Richards, Y. Viala, E. van Dillen, L. Karbevska, H. Zhao, L. Siltala, Nicoletta Sanna, K. Kruszyńska, E. Fraile, R. De March, Y. Lebreton, C. M. Raiteri, D. W. Evans, Ana Ulla, Francesca Fragkoudi, Jan Rybizki, E. Brugaletta, L. Rohrbasser, Andreas Korn, S. G. Baker, A. Garcia-Gutierrez, L. M. Sarro, R. Buzzi, T. Pauwels, Jérôme Berthier, L. Chaoul, W. J. Cooper, Eduard Masana, M. van Leeuwen, D. Garabato, P. Panuzzo, Maroussia Roelens, Benoit Carry, Deborah Busonero, Michael Davidson, J. González-Núñez, Thomas Hilger, E. Licata, M. Weiler, Mikael Granvik, Alessandro Bressan, Morgan Fouesneau, Miguel García-Torres, W. Roux, Pedro García-Lario, Iain A. Steele, P. Ramos, Alessandro Sozzetti, Roberto Molinaro, O. L. Creevey, D. Barbato, Lorenzo Rimoldini, Uwe Lammers, Alexey Mints, P. Sartoretti, E. Livanou, D. Souami, P. Madrero Pardo, David Teyssier, M. Bernet, Yassine Damerdji, X. Peñalosa Esteller, C. Fabre, F. Thévenin, Gérard Jasniewicz, Roberto Morbidelli, Jesus Salgado, Juan Zorec, Ángel Gómez, Douglas J. Marshall, A. G. Butkevich, M. Biermann, E. Racero, J. Torra, R. Gomel, O. Vanel, Daniel Hestroffer, Sebastian L. Hidalgo, P. A. Palicio, F. De Angeli, Richard L. Smart, J. M. Martín-Fleitas, Derek W. Morris, F. Royer, S. Diakite, S. Accart, C. Dolding, P. Burgess, Richard I. Anderson, A. Garofalo, I. Bellas-Velidis, George M. Seabroke, P. Osborne, Claus Fabricius, Jon Marchant, Ramachrisna Teixeira, João Alves, G. Gracia-Abril, R. Santoveña, R. Haigron, N. Unger, Lennart Lindegren, Isabelle Lecoeur-Taïbi, Paolo Giacobbe, Emese Plachy, M. Fabrizio, I. Gonzalez-Santamaria, F. Taris, Kevin Benson, Christos Siopis, M. M. S. Marcos Santos, S. Cowell, Jose M Hernandez, S. Ragaini, Jordi Portell, Linda K. Molnar, R. Drimmel, Pierre Kervella, C. Zurbach, S. Bartolomé, J. Álvarez Cid-Fuentes, E. Salguero, Ulrich Bastian, Robert G. Mann, Marco Castellani, J. Osinde, E. Balbinot, Caroline Soubiran, Rene Andrae, J. Souchay, M. G. Lattanzi, S. Voutsinas, Agnes Fienga, Giovanni Comoretto, P. Esquej, A. C. Lanzafame, Beatrice Bucciarelli, C. Panem, Carlos Dafonte, Alfred Castro-Ginard, J. C. Segovia, Monica Rainer, F. Julbe, A. Hutton, Peter G. Jonker, William Thuillot, A. de Torres, F. De Luise, Pierre Fernique, Céline Reylé, M. Kontizas, G. Plum, Martin Altmann, L. Martin Polo, M. Ramos-Lerate, P. de Teodoro, Sébastien Lambert, G. Altavilla, André Moitinho, D. Munoz, N. Brouillet, Alessandro Spagna, C. Ordénovic, Gisella Clementini, C. Nicolas, Michał Pawlak, Silvio Leccia, A. Delgado, M. Romero-Gómez, N. Cheek, A. Yoldas, Harry Enke, Rosanna Sordo, V. Sanchez Gimenez, Mike Smith, P. David, D. Baines, Paolo Tanga, Guy Rixon, Alberto Krone-Martins, S. Managau, N. A. Walton, S. Bouquillon, C. Fouron, Francois Mignard, Xavier Luri, J. Juaristi Campillo, S. Girona, Thierry Morel, T. Cornez, P. M. Marrese, M. A. Álvarez, S. Liao, Andrej Prsa, M. Sarasso, Nicolas Rambaux, Paul J. McMillan, Ludovic Delchambre, M. Garcia-Reinaldos, M. Haywood, E. Anglada Varela, Antonella Vallenari, S. Regibo, R. E. de Souza, Sahar Shahaf, J. De Ridder, M. Segol, Simchon Faigler, A. Mora, Ulrike Heiter, Carla Cacciari, Minia Manteiga, H. I. Siddiqui, Mario Gai, Leanne P. Guy, N. Leclerc, T. A. Lister, F. A. Jansen, Ruth Carballo, J. M. Carrasco, Bengt Edvardsson, P. Di Matteo, K. Janßen, F. Riclet, F. Solitro, O. Marchal, G. Holland, F. X. Pineau, C. Turon, P. Re Fiorentin, Tsevi Mazeh, Mariateresa Crosta, C. Diener, J. F. Le Campion, Vincenzo Ripepi, M. David, R. Mor, N. Tonello, E. del Pozo, J. Bakker, Davide Massari, A. Sagristà Sellés, Marco Delbo, Eric Slezak, P. Gavras, N. Samaras, S. Marinoni, M. Vaillant, J. M. Petit, P. Yvard, Carme Jordi, Ugo Becciani, Antti Penttilä, R. Geyer, Nigel Hambly, Krzysztof A. Rybicki, L. Balaguer-Núñez, C. A. L. Bailer-Jones, Conny Aerts, Eric Gosset, D. Semeux, T. Roegiers, and Laurent Chemin
Subjects: Physics, Addenda, 010504 meteorology & atmospheric sciences, Errata, Parallaxes, Astronomy, Astronomy and Astrophysics, Astrophysics, Astrometry, Photometric, 01 natural sciences, Techniques, catalogs, astrometry, parallaxes, proper motions, techniques: photometric, errata, addenda, Settore FIS/05 - Astronomia e Astrofisica, Space and Planetary Science, 0103 physical sciences, Proper motions, Catalogs, 010303 astronomy & astrophysics, Data release, 0105 earth and related environmental sciences
Abstract: We present the early installment of the third Gaia data release, Gaia EDR3, consisting of astrometry and photometry for 1.8 billion sources brighter than magnitude 21, complemented with the list of radial velocities from Gaia DR2. Gaia EDR3 contains celestial positions and the apparent brightness in G for approximately 1.8 billion sources. For 1.5 billion of those sources, parallaxes, proper motions, and the (G_BP-G_RP) colour are also available. The passbands for G, G_BP, and G_RP are provided as part of the release. For ease of use, the 7 million radial velocities from Gaia DR2 are included in this release, after the removal of a small number of spurious values. New radial velocities will appear as part of Gaia DR3. Finally, Gaia EDR3 represents an updated materialisation of the celestial reference frame (CRF) in the optical, the Gaia-CRF3, which is based solely on extragalactic sources. The creation of the source list for Gaia EDR3 includes enhancements that make it more robust with respect to high proper motion stars, and the disturbing effects of spurious and partially resolved sources. The source list is largely the same as that for Gaia DR2, but it does feature new sources and there are some notable changes. The source list will not change for Gaia DR3. Gaia EDR3 represents a significant advance over Gaia DR2, with parallax precisions increased by 30 percent, proper motion precisions increased by a factor of 2, and the systematic errors in the astrometry suppressed by 30--40 percent for the parallaxes and by a factor ~2.5 for the proper motions. The photometry also features increased precision, but above all much better homogeneity across colour, magnitude, and celestial position. A single passband for G, G_BP, and G_RP is valid over the entire magnitude and colour range, with no systematics above the 1 percent level.
Published: 2021

23. Gaia Early Data Release 3: Acceleration of the solar system from Gaia astrometry

Author: Vincenzo Ripepi, P. Gavras, M. Vaillant, Mathias Schultheis, László Molnár, E. Poujoulet, Mark Cropper, C. Babusiaux, D. Molina, J. Fernández-Hernández, G. Jevardat de Fombelle, A. de Torres, Aldo Dell'Oro, J. Castañeda, Z. Kostrzewa-Rutkowska, A. Bombrun, André Moitinho, Marcella Marconi, Rossella Cancelliere, M. Hauser, M. Ajaj, C. M. Raiteri, L. Eyer, Michał Pawlak, H. I. Siddiqui, C. Ducourant, Tatiana Muraveva, Tsevi Mazeh, A. Panahi, Federico Marocco, Stefano Bertone, D. Vicente, Patrick Charlot, A. Guerrier, R. De March, Mario Gai, J. Souchay, H. E. P. Lindstrøm, Nicoletta Sanna, Agnes Fienga, Giovanni Comoretto, Jon Marchant, A. Lorca, E. Utrilla, A. Garcia-Gutierrez, Ilaria Musella, L. Balaguer-Núñez, Leanne P. Guy, N. Leclerc, E. Brugaletta, A. Yoldas, Harry Enke, Rosanna Sordo, Zoltan Balog, H. E. Huckle, L. Palaversa, Monica Rainer, T. A. Lister, F. A. Jansen, Ruth Carballo, Alessandro Spagna, J. M. Carrasco, Mikael Granvik, Derek W. Morris, F. Julbe, A. Hutton, J. Osinde, D. W. Evans, M. van Leeuwen, M. Weiler, F. Thévenin, F. Torra, Iain A. Steele, Lorenzo Rimoldini, Alessandro Sozzetti, Francesca Fragkoudi, K. Janßen, O. L. Creevey, J. González-Núñez, T. Pauwels, R. Buzzi, Miguel García-Torres, S. Liao, G. Tauran, Lennart Lindegren, C. Fouron, Pierre Fernique, Céline Reylé, P. Di Matteo, E. Szegedi-Elek, F. Pailler, Stefan Jordan, Roberto Molinaro, Elisabetta Caffau, Federica Spoto, Felix Franke, D. Barbato, Isabelle Lecoeur-Taïbi, Tristan Cantat-Gaudin, Alejandra Recio-Blanco, E. Livanou, W. Roux, X. Peñalosa Esteller, P. A. Palicio, J. H. J. de Bruijne, Sergi Blanco-Cuaresma, Deborah Busonero, F. Riclet, Conny Aerts, Georges Kordopatis, Guy Rixon, F. Solitro, Davide Massari, Mike Smith, D. Baines, Roberto Morbidelli, Gerry Gilmore, G. Plum, Alexey Mints, O. Marchal, Juan Zorec, Ángel Gómez, C. A. Stephenson, Michael Davidson, C. Fabricius, E. Licata, Sergio Messina, Laszlo Szabados, M. Biermann, A. Garofalo, G. Holland, F. De Angeli, Andreas Korn, E. Anglada Varela, Grigori Fedorets, S. Girona, E. Gerlach, Antonella Vallenari, M. Riello, Łukasz Wyrzykowski, Damien Ségransan, F. Taris, L. Bramante, Alberto Cellino, S. Regibo, Andrej Prsa, M. Sarasso, E. Poggio, W. Löffler, Paolo Giacobbe, Jordi Portell, Elisa Distefano, Eric Slezak, I. Bellas-Velidis, Nicolas Rambaux, E. Balbinot, J.-B. Delisle, Maroussia Roelens, E. Salguero, P. de Teodoro, E. van Dillen, Y. Lebreton, Francois Mignard, Sergei A. Klioner, Ulrich Bastian, N. Samaras, G. Orrù, R. E. de Souza, P. Esquej, Paul J. McMillan, A. C. Lanzafame, Sébastien Lambert, Beatrice Bucciarelli, Jose M Hernandez, M. Bernet, S. Ragaini, Gisella Clementini, A. F. Mulone, Ludovic Delchambre, C. Panem, Eric Gosset, P. David, M. Garcia-Reinaldos, Ana Ulla, F. Crifo, J. Guiraud, Mariateresa Crosta, L. Chaoul, C. Diener, Carlos Dafonte, Karri Muinonen, Alex Lobel, J.-L. Bassilana, Maria Süveges, Isabella Pagano, Dimitri Pourbaix, D. Eappachen, M. Haywood, R. Drimmel, Y. Viala, S. Voutsinas, D. Semeux, William Thuillot, N. A. Walton, Paolo Montegriffo, A. Abreu Aramburu, C. Fabre, H. Zhao, Alessandro Bressan, S. Bouquillon, Sanjeev Khanna, T. Lebzelter, N. Tonello, L. Siltala, M. G. Lattanzi, C. Crowley, P. Yvard, Carme Jordi, Elena Pancino, E. del Pozo, Jan Rybizki, Nami Mowlavi, C. Barache, Morgan Fouesneau, J. De Ridder, Ugo Becciani, Martin Altmann, F. van Leeuwen, P. M. Marrese, M. A. Álvarez, A. Jean-Antoine Piccolo, A. F. Lanza, Alberto Vecchiato, Thomas Wevers, Caroline Soubiran, C. P. Murphy, A. M. Piersimoni, Alessandra Mastrobuono-Battisti, Peter G. Jonker, A. Sagristà Sellés, T. Roegiers, S. Marinoni, Johannes Sahlmann, Rene Andrae, P. Sartoretti, G. Altavilla, Raphael Guerra, F. X. Pineau, M. Segol, T. Prusti, J. J. González-Vidal, J. J. Aguado, N. R. Millar, A. Baudesson-Stella, Andrea Chiavassa, Laurent Chemin, C. Turon, H. Steidelmüller, Douglas J. Marshall, A. G. Butkevich, Alberto Riva, P. de Laverny, Simchon Faigler, Laurent Galluccio, A. Mora, P. Re Fiorentin, C. Ordénovic, J. F. Le Campion, A. Delgado, V. Sanchez Gimenez, M. David, G. Sadowski, R. L. Smart, A. Masip, Laia Casamiquela, R. Messineo, R. Mor, J. Bakker, C. Dolding, J. M. Martín-Fleitas, S. Diakite, Coryn A. L. Bailer-Jones, D. Souami, P. Madrero Pardo, Martin A. Barstow, David Teyssier, Ummi Abbas, Jesus Salgado, Paolo Tanga, A. Burlacu, O. Vanel, Ulrike Heiter, Daniel Hestroffer, Sebastian L. Hidalgo, H. E. Delgado, Alberto Krone-Martins, C. Robin, Kevin Benson, Christos Siopis, S. Managau, P. Burgess, Tomaz Zwitter, M. M. S. Marcos Santos, S. Cowell, J. L. Halbwachs, Xavier Luri, Antti Penttilä, R. Geyer, Minia Manteiga, Yassine Damerdji, Nigel Hambly, S. Bartolomé, J. Álvarez Cid-Fuentes, P. Osborne, J. Juaristi Campillo, Mark Taylor, Richard I. Anderson, Y. Le Fustec, Thierry Morel, T. Cornez, Krzysztof A. Rybicki, L. Pulone, N. Bauchet, Pierre Kervella, C. Zurbach, Alfred Castro-Ginard, Frédéric Arenou, P. Ramos, Robert G. Mann, Annie C. Robin, J. C. Segovia, M. Barros, Hector Canovas, D. L. Harrison, Y. Lasne, L. Noval, David Hobbs, E. F. del Peloso, P. Castro Sampol, Yves Fremat, F. De Luise, Daniel Michalik, P. J. Richards, L. Karbevska, N. Hładczuk, K. Kruszyńska, T. Boch, Sofia Randich, A. G. A. Brown, C. Pagani, L. Martin Polo, M. Ramos-Lerate, Krzysztof Nienartowicz, Eduard Masana, E. Racero, E. Fraile, Marc Audard, N. Robichon, Luciana Bianchi, G. Gracia-Abril, R. Santoveña, R. Haigron, N. Unger, Jérôme Berthier, Despina Hatzidimitriou, R. Gutiérrez-Sánchez, M. Fabrizio, I. Gonzalez-Santamaria, A. Dapergolas, P. Panuzzo, Benoit Carry, Francesca Figueras, R. Blomme, Elmé Breedt, D. Munoz, Diego Bossini, G. Busso, D. Katz, Simon Hodgkin, Ennio Poretti, N. Brouillet, Marco Castellani, Nicholas Rowell, Arnaud Siebert, M. Romero-Gómez, Shay Zucker, W. van Reeven, A. Kochoska, G. Giuffrida, Eva Sciacca, T. Carlucci, L. M. Sarro, M. I. Carnerero, Amina Helmi, D. Garabato, B. Holl, Michele Bellazzini, L. Rohrbasser, Teresa Antoja, J. Torra, Thomas Hilger, Pedro García-Lario, Gérard Jasniewicz, Enrique Solano, S. G. Baker, W. J. Cooper, F. Royer, S. Accart, George M. Seabroke, João Alves, Emese Plachy, C. Nicolas, Silvio Leccia, N. Cheek, Uwe Lammers, Ramachrisna Teixeira, Techniche Universtât Desden, Joseph Louis LAGRANGE (LAGRANGE), Université Côte d'Azur (UCA)-Université Nice Sophia Antipolis (... - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Lund Observatory, Lund University [Lund], Zentrum für astronomie, Universität Heidelberg [Heidelberg], Department of nuclear medicine, Haukeland University Hospital, University of Bergen (UiB)-University of Bergen (UiB), Merck Serono S.A [Geneva Research Center], Laboratoire d'études spatiales et d'instrumentation en astrophysique (LESIA (UMR_8109)), Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de Paris, Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Université de Paris (UP), Institut de Physique de Rennes (IPR), Université de Rennes 1 (UR1), Université de Rennes (UNIV-RENNES)-Université de Rennes (UNIV-RENNES)-Centre National de la Recherche Scientifique (CNRS), Université Nice Sophia Antipolis (1965 - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS), Universität Heidelberg [Heidelberg] = Heidelberg University, Laboratoire d'études spatiales et d'instrumentation en astrophysique = Laboratory of Space Studies and Instrumentation in Astrophysics (LESIA), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Université Paris Cité (UPCité), Université de Rennes (UR)-Centre National de la Recherche Scientifique (CNRS), Université Nice Sophia Antipolis (... - 2019) (UNS), Université Côte d'Azur (UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS), Planetary-system research, Department of Physics, Particle Physics and Astrophysics, Gaia Collaboration, Unidad de Excelencia Científica María de Maeztu Instituto de Ciencias del Cosmos Universidad de Barcelona, MDM-2014-0369, Centro de Excelencia Científica Severo Ochoa, Instituto de Ciencias del Cosmos de la Universidad de Barcelona, SEV2015-0493, Deliste, J. B. [0000-0001-5844-9888], Sozzeti, A. [0000-0002-7504-365X], Forderung der wissenschaftlichen Forschung (FWF), Belgian federal Science Policy Office (BELSPO), Hertha Firnberg Programme, Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), Comite Francais d'Evaluation de la Cooperation Universitaire et Scientifique avec le Bresil (COFECUB), National Natural Science Foundation of China (NSFC), China Scholarship Council (CSC), European Commission (EC), European Research Council (ERC), Hungarian National Research, Development, and Innovation Office (NKFIH), Science Foundation Ireland (SFI), Israel Science Foundation (ISF), Agenzia Spaziale Italiana (ASI), Istituto Nazionale di Astrofisica (INAF), Netherlands Research School for Astronomy (NOVA), Fundacao para a Ciencia e a Tecnologia (FCT), Agencia Estatal de Investigación (AEI), European Space Agency (ESA), Centre National D'Etudes Spatiales (CNES), Ministero dell'Istruzione, dell'Università e della Ricerca (MIUR), Narodowe Centrum Nauki (NCN), Slovenian Research Agency, Swedish National Space Agency (SNSA), United Kingdom Science and Technology Facilities Council (STFC), Universitat de Barcelona (UB), Generalitat de Catalunya, Xunta de Galicia, Universidad de Cantabria, ITA, European Commission, Ministerio de Ciencia, Innovación y Universidades (España), Ministerio de Economía y Competitividad (España), Astronomy, and Kapteyn Astronomical Institute
Subjects: Data Analysis, Solar System, Astronomy, kinematics and dynamics, virgo cluster, Astrophysics, 01 natural sciences, bar, Astronomi, astrofysik och kosmologi, large-magellanic-cloud, Methods, Astronomy, Astrophysics and Cosmology, 010303 astronomy & astrophysics, Physics, Astrophysics of Galaxies, [SDU.ASTR]Sciences of the Universe [physics]/Astrophysics [astro-ph], Astrophysics::Instrumentation and Methods for Astrophysics, Astrometry, VIRGO CLUSTER, Kinematics and Dynamics, Amplitude, kinematics, Physical Sciences, MILKY-WAY, astrometry, Galaxy: kinematics and dynamics, PROPER MOTION, Proper motion, perturbation, proper motions, reference systems, methods: data analysis, Astrophysics - Astrophysics of Galaxies, FOS: Physical sciences, Context (language use), proper motion, Astronomy & Astrophysics, MASS, Computer Science::Digital Libraries, Gravitational potential, Acceleration, Settore FIS/05 - Astronomia e Astrofisica, 0103 physical sciences, data analysis [methods], Vector spherical harmonics, KINEMATICS, distance, milky-way, Science & Technology, PERTURBATION, 010308 nuclear & particles physics, Astronomy and Astrophysics, kinematics and dynamics [Galaxy], 115 Astronomy, Space science, Physics::History of Physics, BAR, Galaxy, Space and Planetary Science, [SDU]Sciences of the Universe [physics], Astrophysics of Galaxies (astro-ph.GA), DISTANCE, mass, LARGE-MAGELLANIC-CLOUD
Abstract: Context. Gaia Early Data Release 3 (Gaia EDR3) provides accurate astrometry for about 1.6 million compact (QSO-like) extragalactic sources, 1.2 million of which have the best-quality five-parameter astrometric solutions., Aims. The proper motions of QSO-like sources are used to reveal a systematic pattern due to the acceleration of the solar systembarycentre with respect to the rest frame of the Universe. Apart from being an important scientific result by itself, the acceleration measured in this way is a good quality indicator of the Gaia astrometric solution., Methods. Theeffect of the acceleration was obtained as a part of the general expansion of the vector field of proper motions in vector spherical harmonics (VSH). Various versions of the VSH fit and various subsets of the sources were tried and compared to get the most consistent result and a realistic estimate of its uncertainty. Additional tests with the Gaia astrometric solution were used to get a better idea of the possible systematic errors in the estimate., Results. Our best estimate of the acceleration based on Gaia EDR3 is (2.32 +/- 0.16) x 10(-10) m s(-2) (or 7.33 +/- 0.51 km s(-1) Myr-1) towards alpha = 269.1 degrees +/- 5.4 degrees, delta = -31.6 degrees +/- 4.1 degrees, corresponding to a proper motion amplitude of 5.05 +/- 0.35 mu as yr(-1). This is in good agreement with the acceleration expected from current models of the Galactic gravitational potential. We expect that future Gaia data releases will provide estimates of the acceleration with uncertainties substantially below 0.1 mu as yr(-1).
Published: 2020
Full Text: View/download PDF

24. Flutter of Telescopic Span Morphing Wings

Author: Jonathan E. Cooper, Tariq Darabseh, Rafic M. Ajaj, and Farag K. Omar
Subjects: Cantilever, Aerospace Engineering, Ocean Engineering, 02 engineering and technology, Span (engineering), 01 natural sciences, 010305 fluids & plasmas, Physics::Fluid Dynamics, 0203 mechanical engineering, 0103 physical sciences, Civil and Structural Engineering, Physics, Wing, business.industry, Applied Mathematics, Mechanical Engineering, span morphing, Building and Construction, Structural engineering, Aeroelasticity, Morphing, 020303 mechanical engineering & transports, aeroelasticity, flutter, Telescopic wing, Flutter, business, Beam (structure)
Abstract: This paper studies the aeroelastic behavior of telescopic, multi-segment, span morphing wings. The wing is modeled as a linear, multi-segment, stepped, cantilever Euler–Bernoulli beam. It consists of three segments along the axis and each segment has different geometric, mechanical, and inertial properties. The aeroelastic analysis takes into account spanwise out-of-plane bending and torsion only, for which the corresponding shape functions are derived and validated. The use of shape functions allows representing the wing as an equivalent aerofoil whose generalized coordinates are defined at the wingtip according to the Rayleigh–Ritz method. Theodorsen’s unsteady aerodynamic theory is used to estimate the aerodynamic loads. A representative Padé approximation for the Theodorsen’s transfer function is utilized to model the aerodynamic behaviors in state-space form allowing time-domain simulation and analysis. The effect of the segments’ mechanical, geometric, and inertial properties on the aeroelastic behavior of the wing is assessed. Finally, the viability of span morphing as a flutter suppression device is studied.
Published: 2019
Full Text: View/download PDF

25. Gaia Data Release 2: Properties and validation of the radial velocities

Author: U. Munari, M. Ajaj, Thierry Morel, F. Pailler, L. Chemin, Steve Boudreault, A. E. Gomez, Y. Lasne, C. Panem, G. Plum, Y. Viala, Mark Cropper, F. Crifo, Tomaz Zwitter, R. Blomme, F. Meynadier, M. J. S. Smith, S. G. Baker, H. Huckle, Leanne P. Guy, K. Janßen, Vincent Lemaitre, P. Sartoretti, C. Delle Luche, Antonella Vallenari, A. Jean-Antoine, G. Tauran, M. David, Frédéric Arenou, Yves Fremat, C. Dolding, C. Fabre, P. Panuzzo, Yassine Damerdji, C. Allende Prieto, C. Zurbach, A. Gueguen, K. Benson, N. Leclerc, O. Marchal, Diego Bossini, Nigel Hambly, Carine Babusiaux, Eric Gosset, J. Gerssen, Gérard Jasniewicz, F. Royer, George M. Seabroke, A. Guerrier, M. Žerjal, C. Turon, R. Haigron, F. Thévenin, Caroline Soubiran, D. Katz, Galaxies, Etoiles, Physique, Instrumentation (GEPI), Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de Paris, PSL Research University (PSL)-PSL Research University (PSL)-Centre National de la Recherche Scientifique (CNRS), Astrophysique Interprétation Modélisation (AIM (UMR_7158 / UMR_E_9005 / UM_112)), Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Institut national des sciences de l'Univers (INSU - CNRS)-Université Paris Diderot - Paris 7 (UPD7)-Centre National de la Recherche Scientifique (CNRS), Mullard Space Science Laboratory (MSSL), University College of London [London] (UCL), Royal Observatory of Belgium [Brussels], Laboratoire Univers et Particules de Montpellier (LUPM), Université de Montpellier (UM)-Université Montpellier 2 - Sciences et Techniques (UM2)-Institut National de Physique Nucléaire et de Physique des Particules du CNRS (IN2P3)-Centre National de la Recherche Scientifique (CNRS), Centre National d'Études Spatiales [Toulouse] (CNES), Centre d'étude spatiale des rayonnements (CESR), Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées-Université Fédérale Toulouse Midi-Pyrénées-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire Midi-Pyrénées (OMP), Université Fédérale Toulouse Midi-Pyrénées-Centre National de la Recherche Scientifique (CNRS), Université de Picardie Jules Verne (UPJV), Laboratory of the Institute for Fiscal Studies (IFS), Institute for Fiscal Studies, Probabilités, statistique, physique mathématique (PSPM), Institut Camille Jordan [Villeurbanne] (ICJ), École Centrale de Lyon (ECL), Université de Lyon-Université de Lyon-Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Institut National des Sciences Appliquées de Lyon (INSA Lyon), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Université Jean Monnet [Saint-Étienne] (UJM)-Centre National de la Recherche Scientifique (CNRS)-École Centrale de Lyon (ECL), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Université Jean Monnet [Saint-Étienne] (UJM)-Centre National de la Recherche Scientifique (CNRS), Laboratoire d'Astrophysique de Bordeaux [Pessac] (LAB), Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Joseph Louis LAGRANGE (LAGRANGE), Université Nice Sophia Antipolis (... - 2019) (UNS), Université Côte d'Azur (UCA)-Université Côte d'Azur (UCA)-Observatoire de la Côte d'Azur, Université Côte d'Azur (UCA)-Centre National de la Recherche Scientifique (CNRS), Institut de Planétologie et d'Astrophysique de Grenoble (IPAG), Centre National d'Études Spatiales [Toulouse] (CNES)-Université Grenoble Alpes (UGA)-Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire des Sciences de l'Univers de Grenoble (OSUG), Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP)-Institut national de recherche en sciences et technologies pour l'environnement et l'agriculture (IRSTEA)-Université Joseph Fourier - Grenoble 1 (UJF)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes (UGA)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP)-Institut national de recherche en sciences et technologies pour l'environnement et l'agriculture (IRSTEA)-Université Joseph Fourier - Grenoble 1 (UJF)-Centre National de la Recherche Scientifique (CNRS), Max-Planck-Institut für Sonnensystemforschung (MPS), Max-Planck-Gesellschaft, Laboratoire national de métrologie et d'essais - Systèmes de Référence Temps-Espace (LNE - SYRTE), Systèmes de Référence Temps Espace (SYRTE), PSL Research University (PSL)-PSL Research University (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de Paris, PSL Research University (PSL)-PSL Research University (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS), Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS)-Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Université Paris Diderot - Paris 7 (UPD7), Centre National de la Recherche Scientifique (CNRS)-Université Jean Monnet [Saint-Étienne] (UJM)-École Centrale de Lyon (ECL), Université de Lyon-Université de Lyon-Institut National des Sciences Appliquées de Lyon (INSA Lyon), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Centre National de la Recherche Scientifique (CNRS)-Université Jean Monnet [Saint-Étienne] (UJM)-École Centrale de Lyon (ECL), Université de Lyon, ITA, Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Centre National de la Recherche Scientifique (CNRS), Royal Observatory of Belgium [Brussels] (ROB), Université Montpellier 2 - Sciences et Techniques (UM2)-Institut National de Physique Nucléaire et de Physique des Particules du CNRS (IN2P3)-Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS), Observatoire Midi-Pyrénées (OMP), Météo France-Centre National d'Études Spatiales [Toulouse] (CNES)-Université Fédérale Toulouse Midi-Pyrénées-Centre National de la Recherche Scientifique (CNRS)-Institut de Recherche pour le Développement (IRD)-Météo France-Centre National d'Études Spatiales [Toulouse] (CNES)-Université Fédérale Toulouse Midi-Pyrénées-Centre National de la Recherche Scientifique (CNRS)-Institut de Recherche pour le Développement (IRD)-Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS)-Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées, M2A 2019, Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Université Côte d'Azur (UCA)-Université Nice Sophia Antipolis (... - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Institut national des sciences de l'Univers (INSU - CNRS)-Centre National d'Études Spatiales [Toulouse] (CNES)-Centre National de la Recherche Scientifique (CNRS)-Observatoire des Sciences de l'Univers de Grenoble (OSUG ), Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Institut national des sciences de l'Univers (INSU - CNRS)-Institut national de recherche en sciences et technologies pour l'environnement et l'agriculture (IRSTEA)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes [2016-2019] (UGA [2016-2019])-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP )-Institut national de recherche en sciences et technologies pour l'environnement et l'agriculture (IRSTEA)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes [2016-2019] (UGA [2016-2019]), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de Paris, and Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS)
Subjects: FOS: Physical sciences, Context (language use), Astrophysics, 01 natural sciences, Spectral line, surveys, techniques: radial velocities, 0103 physical sciences, Range (statistics), 010303 astronomy & astrophysics, Instrumentation and Methods for Astrophysics (astro-ph.IM), Physics, Spectrometer, 010308 nuclear & particles physics, Astronomy and Astrophysics, Effective temperature, [SDU.ASTR.IM]Sciences of the Universe [physics]/Astrophysics [astro-ph]/Instrumentation and Methods for Astrophysic [astro-ph.IM], Radial velocity, Stars, 13. Climate action, Space and Planetary Science, Magnitude (astronomy), [PHYS.ASTR]Physics [physics]/Astrophysics [astro-ph], Astrophysics - Instrumentation and Methods for Astrophysics, techniques: spectroscopic, catalogs, astro-ph.IM
Abstract: For Gaia DR2 (GDR2), 280 million spectra, collected by the RVS instrument on-board Gaia, were processed and median radial velocities were derived for 9.8 million sources brighter than Grvs = 12 mag. This paper describes the validation and properties of the median radial velocities published in GDR2. Quality tests and filters are applied to select, from the 9.8 million radial velocities, those with the quality to be published in GDR2. The accuracy of the selected sample is assessed with respect to ground-based catalogues. Its precision is estimated using both ground-based catalogues and the distribution of the Gaia radial velocity uncertainties. GDR2 contains median radial velocities for 7 224 631 stars, with Teff in the range [3550, 6900] K, which passed succesfully the quality tests. The published median radial velocities provide a full sky-coverage and have a completness with respect to the astrometric data of 77.2\% (for $G \leq 12.5$ mag). The median radial velocity residuals with respect to the ground-based surveys vary from one catalogue to another, but do not exceed a few 100s m/s. In addition, the Gaia radial velocities show a positive trend as a function of magnitude, which starts around Grvs $\sim 9$ mag and reaches about $+500$ m/s at Grvs $= 11.75$ mag. The overall precision, estimated from the median of the Gaia radial velocity uncertainties, is 1.05 km/s. The radial velocity precision is function of many parameters, in particular the magnitude and effective temperature. For bright stars, Grvs in [4, 8] mag, the precision is in the range 200-350 m/s, which is about 3 to 5 times more precise than the pre-launch specification of 1 km/s. At the faint end, Grvs = 11.75 mag, the precisions for Teff = 5000 K and 6500 K are respectively 1.4 km/s and 3.7 km/s., Comment: Submitted to A&A
Published: 2019
Full Text: View/download PDF

26. Recent developments in the aeroelasticity of morphing aircraft

Author: Muhammed S. Parancheerivilakkathil, Wesley J. Cantwell, Rafic M. Ajaj, Michael I. Friswell, and Mohammadreza Amoozgar
Subjects: 020301 aerospace & aeronautics, Computer science, Mechanical Engineering, Stability (learning theory), Aerospace Engineering, 02 engineering and technology, Aerodynamics, Aeroelasticity, 01 natural sciences, 010305 fluids & plasmas, Morphing, 0203 mechanical engineering, Flight dynamics, Mechanics of Materials, 0103 physical sciences, Systems engineering, Flutter
Abstract: This paper presents an extensive review of the developments in the aeroelasticity of morphing aircraft that occurred in the last decade (from 2009 to 2020). It focuses mainly on fixed-wing aircraft and highlights some representative examples from rotary-wing aircraft. Morphing wings are usually associated with significant changes in the aerodynamic loads, structural/elastic properties, and inertial properties and hence the aeroelastic behavior. Changes in aeroelastic behavior can also affect the flight dynamics, stability, and control of air-vehicles. The main motivation for this paper is the fact that it is not fully possible to assess and quantify the benefits of morphing technologies without accounting for aeroelastic effects. The literature on the aeroelasticity of morphing aircraft can be split into two main themes: Aeroelastic Stability and Aeroelastic Control. The first theme (Aeroelastic Stability) includes studies conducted on morphing concepts to ensure that they satisfy certain aeroelastic requirements/constraints and that such requirements/constraints do not limit the potential benefits of morphing. The second theme (Aeroelastic Control) includes studies that utilized morphing technologies to improve aeroelastic characteristics and/or control flight loads. It is evident that in both themes, the aeroelasticity of morphing aircraft has been analyzed using analytical, numerical, and/or computational tools with a very limited number of wind-tunnel and/or flight tests. In this paper, research activities and studies are categorized according to the morphing degree of freedom they address. For each degree of freedom, research activities are arranged according to the theme they fit under. Aeroelastic frameworks developed for generic morphing applications are also reviewed. In addition, the aeroelastic models used are highlighted and discussed. Finally, trends and research gaps are identified and discussed and main conclusions are drawn.
Published: 2021
Full Text: View/download PDF

27. Span morphing using the GNATSpar wing

Author: Rafic M. Ajaj, Wail Harasani, Michael I. Friswell, and Mostefa Bourchak
Subjects: Worm drive, Engineering, business.product_category, Wing, Lift-induced drag, business.industry, Aerospace Engineering, Mechanical engineering, 02 engineering and technology, Aerodynamics, Span (engineering), 01 natural sciences, 010305 fluids & plasmas, Morphing, 020303 mechanical engineering & transports, 0203 mechanical engineering, Control theory, Range (aeronautics), 0103 physical sciences, business, Wingspan
Abstract: Rigid wings usually fly at sub-optimal conditions generating unnecessary aerodynamic loses represented in flight time, fuel consumption, and unfavourable operational characteristics. High aspect ratio wings have good range and fuel efficiency, but lack manoeuvrability. On the other hand, low aspect ratio wings fly faster and are more manoeuvrable, but have poor aerodynamic performance. Span morphing technology allows integrating both features in a single wing design and allows continuously adjusting the wingspan to match the instantaneous flight conditions and mission objectives. This paper develops, a novel span morphing concept, the Gear driveN Autonomous Twin Spar (GNATSpar) for a mini-UAV. The GNATSpar can be used to achieve span extensions up to 100% but for demonstration purposes it is used here to achieve span extensions up to 20% to reduce induced drag and increase flight endurance. The GNATSpar is superior to conventional telescopic and articulated structures as it uses the space available in the opposite sides of the wing instead of relying on overlapping structures and bearings. In addition, it has a self-locking actuation mechanism due to the low lead angle of the driving worm gear. Following the preliminary aero-structural sizing of the concept, a physical prototype is developed and tested in the 7 ′ × 5 ′ wind-tunnel at the University of Southampton. Finally, benefits and drawbacks of the design are highlighted and analysed.
Published: 2016
Full Text: View/download PDF

28. The Transformer aircraft: a multimission unmanned aerial vehicle capable of symmetric and asymmetric span morphing

Author: Rafic M. Ajaj and Girish K. Jankee
Subjects: Aircraft flight mechanics, business.industry, Computer science, Aerospace Engineering, Structural integrity, 02 engineering and technology, 01 natural sciences, Rack and pinion, 010305 fluids & plasmas, law.invention, Morphing, 020303 mechanical engineering & transports, 0203 mechanical engineering, law, 0103 physical sciences, Aerospace engineering, Transformer, business
Abstract: This paper presents the development and extensive testing of the Transformer aircraft, a multimission UAV capable of symmetric and asymmetric span morphing. The UAV utilises a novel actuation system based on a rack and pinion mechanism to achieve span extensions up to 50%. The Transformer can morph symmetrically to enhance flight performance and asymmetrically to provide roll control. Extensive mechanical testing followed by wind-tunnel testing in the RJ Mitchell Wind-tunnel at the University of Southampton were conducted to ensure structural integrity and assess the behaviour of the UAV. Finally, a series of flight-testing were performed and the flight mechanics aspects associated with both symmetric and asymmetric span morphing were investigated.
Published: 2018

29. Aeroelasticity of compliant span morphing wings

Author: Rafic M. Ajaj and Michael I. Friswell
Subjects: 020301 aerospace & aeronautics, Wing, Cantilever, Computer science, business.industry, 02 engineering and technology, Aerodynamics, Bending, Structural engineering, Condensed Matter Physics, Aeroelasticity, Span (engineering), 01 natural sciences, Atomic and Molecular Physics, and Optics, 010305 fluids & plasmas, Morphing, 0203 mechanical engineering, Mechanics of Materials, 0103 physical sciences, Signal Processing, Flutter, General Materials Science, Electrical and Electronic Engineering, business, Civil and Structural Engineering
Abstract: A low-fidelity aeroelastic model is developed to study the dynamic behaviour of uniform, cantilever span morphing wings. The wing structure is modelled using the shape functions of the bending and torsional modes of a uniform cantilever wing according to the Rayleigh–Ritz method. Theodorsen's unsteady aerodynamic theory is used to model the aerodynamic loads. A Pade approximation for the Theodorsen's transfer function is utilised to allow time-domain simulation and analysis. The sensitivity of the aeroelastic behaviour of span morphing wings to different geometric parameters and mechanical properties is considered. Furthermore, the impact of morphing rate on the aeroelastic behaviour is studied. Finally, the use of two novel span morphing concepts for flutter suppression is assessed.
Published: 2018

30. Gaia Data Release 2: Processing the spectroscopic data

Author: R. Haigron, Y. Lasne, U. Munari, C. Delle Luche, M. Ajaj, Vincent Lemaitre, C. Turon, L. Chemin, A. Guerrier, M. Zerjal, F. Crifo, Yassine Damerdji, K. Janssen, R. Blomme, Thierry Morel, M. J. S. Smith, C. Zurbach, F. Riclet, Eric Gosset, A. Jean-Antoine, Mark Cropper, H. Huckle, Carine Babusiaux, C. Fabre, Frédéric Arenou, Yves Fremat, Steve Boudreault, C. Allende Prieto, Tomaz Zwitter, S. G. Baker, F. Meynadier, O. Marchal, Nigel Hambly, A. E. Gomez, K. Benson, C. Panem, Leanne P. Guy, Gérard Jasniewicz, G. Plum, D. Katz, P. Panuzzo, A. Gueguen, C. Dolding, F. Royer, George M. Seabroke, P. Sartoretti, M. David, F. Pailler, G. Tauran, Y. Viala, Caroline Soubiran, F. Thévenin, N. Leclerc, Galaxies, Etoiles, Physique, Instrumentation (GEPI), Centre National de la Recherche Scientifique (CNRS)-Institut national des sciences de l'Univers (INSU - CNRS)-Université Paris Diderot - Paris 7 (UPD7)-Observatoire de Paris, Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL), Mullard Space Science Laboratory (MSSL), University College of London [London] (UCL), Royal Observatory of Belgium [Brussels] (ROB), Laboratoire Univers et Particules de Montpellier (LUPM), Université Montpellier 2 - Sciences et Techniques (UM2)-Institut National de Physique Nucléaire et de Physique des Particules du CNRS (IN2P3)-Université de Montpellier (UM)-Centre National de la Recherche Scientifique (CNRS), Centre National d'Études Spatiales [Toulouse] (CNES), Centre de Recherche en Astronomie Astrophysique et Géophysique (CRAAG), Institut d'Astrophysique et de Géophysique [Liège], Université de Liège, Littoral, Environnement, Télédétection, Géomatique (LETG - Nantes), Institut de Géographie et d'Aménagement Régional de l'Université de Nantes (IGARUN), Université de Nantes (UN)-Université de Nantes (UN)-Université de Rennes 2 (UR2), Université de Rennes (UNIV-RENNES)-Université de Rennes (UNIV-RENNES)-Université de Brest (UBO)-Université de Caen Normandie (UNICAEN), Normandie Université (NU)-Normandie Université (NU)-École pratique des hautes études (EPHE), Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Centre National de la Recherche Scientifique (CNRS), Thales Services, THALES, University of Geneva [Switzerland], Leibniz Institute for Astrophysics Potsdam (AIP), Probabilités, statistique, physique mathématique (PSPM), Institut Camille Jordan [Villeurbanne] (ICJ), École Centrale de Lyon (ECL), Université de Lyon-Université de Lyon-Université Claude Bernard Lyon 1 (UCBL), Université de Lyon-Université Jean Monnet [Saint-Étienne] (UJM)-Institut National des Sciences Appliquées de Lyon (INSA Lyon), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-École Centrale de Lyon (ECL), Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS), M2A 2018, Laboratoire d'Astrophysique de Bordeaux [Pessac] (LAB), Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université de Bordeaux (UB)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Joseph Louis LAGRANGE (LAGRANGE), Université Côte d'Azur (UCA)-Université Nice Sophia Antipolis (... - 2019) (UNS), COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Observatoire de la Côte d'Azur, COMUE Université Côte d'Azur (2015-2019) (COMUE UCA)-Université Côte d'Azur (UCA)-Institut national des sciences de l'Univers (INSU - CNRS)-Centre National de la Recherche Scientifique (CNRS), Institut de Planétologie et d'Astrophysique de Grenoble (IPAG), Centre National d'Études Spatiales [Toulouse] (CNES)-Observatoire des Sciences de l'Univers de Grenoble (OSUG ), Institut national des sciences de l'Univers (INSU - CNRS)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Université Grenoble Alpes (UGA)-Institut national des sciences de l'Univers (INSU - CNRS)-Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry])-Centre National de la Recherche Scientifique (CNRS)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Université Grenoble Alpes (UGA), Max-Planck-Institut für Sonnensystemforschung (MPS), Max-Planck-Gesellschaft, Unidad de Astronomia, Universidad de Antofagasta, ATOS for CNES, Max Planck Institute for Extraterrestrial Physics (MPE), Systèmes de Référence Temps Espace (SYRTE), Institut national des sciences de l'Univers (INSU - CNRS)-Observatoire de Paris, Université Paris sciences et lettres (PSL)-Université Paris sciences et lettres (PSL)-Sorbonne Université (SU)-Centre National de la Recherche Scientifique (CNRS), University of Ljubljana, Laboratoire des Matériaux, Surfaces et Procédés pour la Catalyse (LMSPC), Institut de chimie et procédés pour l'énergie, l'environnement et la santé (ICPEES), Université de Strasbourg (UNISTRA)-Matériaux et nanosciences d'Alsace (FMNGE), Institut de Chimie du CNRS (INC)-Université de Strasbourg (UNISTRA)-Université de Haute-Alsace (UHA) Mulhouse - Colmar (Université de Haute-Alsace (UHA))-Institut National de la Santé et de la Recherche Médicale (INSERM)-Centre National de la Recherche Scientifique (CNRS)-Institut de Chimie du CNRS (INC)-Université de Strasbourg (UNISTRA)-Université de Haute-Alsace (UHA) Mulhouse - Colmar (Université de Haute-Alsace (UHA))-Institut National de la Santé et de la Recherche Médicale (INSERM)-Centre National de la Recherche Scientifique (CNRS)-Centre National de la Recherche Scientifique (CNRS)-Université de Strasbourg (UNISTRA)-Matériaux et nanosciences d'Alsace (FMNGE), and Institut de Chimie du CNRS (INC)-Université de Strasbourg (UNISTRA)-Université de Haute-Alsace (UHA) Mulhouse - Colmar (Université de Haute-Alsace (UHA))-Institut National de la Santé et de la Recherche Médicale (INSERM)-Centre National de la Recherche Scientifique (CNRS)-Institut de Chimie du CNRS (INC)-Université de Strasbourg (UNISTRA)-Université de Haute-Alsace (UHA) Mulhouse - Colmar (Université de Haute-Alsace (UHA))-Institut National de la Santé et de la Recherche Médicale (INSERM)-Centre National de la Recherche Scientifique (CNRS)-Centre National de la Recherche Scientifique (CNRS)
Subjects: Accuracy and precision, Pipeline (computing), FOS: Physical sciences, Astrophysics, Astrophysics::Cosmology and Extragalactic Astrophysics, 01 natural sciences, Spectral line, surveys, techniques: radial velocities, 0103 physical sciences, data analysis [methods], Calibration, Astrophysics::Solar and Stellar Astrophysics, 010303 astronomy & astrophysics, Instrumentation and Methods for Astrophysics (astro-ph.IM), Astrophysics::Galaxy Astrophysics, Solar and Stellar Astrophysics (astro-ph.SR), Physics, Data processing, Spectrometer, 010308 nuclear & particles physics, radial velocities [techniques], Astronomy and Astrophysics, methods: data analysis, Astrophysics - Astrophysics of Galaxies, Radial velocity, Stars, Astrophysics - Solar and Stellar Astrophysics, Space and Planetary Science, Astrophysics of Galaxies (astro-ph.GA), spectroscopic [techniques], Astrophysics::Earth and Planetary Astrophysics, [PHYS.ASTR]Physics [physics]/Astrophysics [astro-ph], Astrophysics - Instrumentation and Methods for Astrophysics, techniques: spectroscopic, catalogs
Abstract: The Gaia Data Release 2 contains the 1st release of radial velocities complementing the kinematic data of a sample of about 7 million relatively bright, late-type stars. Aims: This paper provides a detailed description of the Gaia spectroscopic data processing pipeline, and of the approach adopted to derive the radial velocities presented in DR2. Methods: The pipeline must perform four main tasks: (i) clean and reduce the spectra observed with the Radial Velocity Spectrometer (RVS); (ii) calibrate the RVS instrument, including wavelength, straylight, line-spread function, bias non-uniformity, and photometric zeropoint; (iii) extract the radial velocities; and (iv) verify the accuracy and precision of the results. The radial velocity of a star is obtained through a fit of the RVS spectrum relative to an appropriate synthetic template spectrum. An additional task of the spectroscopic pipeline was to provide 1st-order estimates of the stellar atmospheric parameters required to select such template spectra. We describe the pipeline features and present the detailed calibration algorithms and software solutions we used to produce the radial velocities published in DR2. Results: The spectroscopic processing pipeline produced median radial velocities for Gaia stars with narrow-band near-IR magnitude Grvs < 12 (i.e. brighter than V~13). Stars identified as double-lined spectroscopic binaries were removed from the pipeline, while variable stars, single-lined, and non-detected double-lined spectroscopic binaries were treated as single stars. The scatter in radial velocity among different observations of a same star, also published in DR2, provides information about radial velocity variability. For the hottest (Teff > 7000 K) and coolest (Teff < 3500 K) stars, the accuracy and precision of the stellar parameter estimates are not sufficient to allow selection of appropriate templates. [Abridged], 25 pages, 17 figures, accepted for publication in A&A as part of the Gaia 2nd data release special issue
Published: 2018
Full Text: View/download PDF

31. Analysis of cross-laminated timber by computational homogenisation and experimental validation

Author: E.I. Saavedra Flores, Iman Dayyani, Raj Das, F.A. DiazDelaO, P. González Soto, Rafic M. Ajaj, and Rafael Castro-Triguero
Subjects: Engineering, Finite element procedure, business.industry, Modulus, Structural engineering, Experimental validation, Bending, Compression (physics), Finite element method, Shear (sheet metal), Ceramics and Composites, Cross laminated timber, business, Civil and Structural Engineering
Abstract: In this paper we investigate the mechanical behaviour of cross-laminated timber panels by a computational homogenisation approach. A finite element procedure is adopted within a multi-scale modelling framework to determine the constitutive response of timber. As some of the microstructural parameters of wood are either not well-known or susceptible to considerable variation, we introduce uncertainty in the definition of the material. In order to validate the present multi-scale model, we measure experimentally the longitudinal Young’s modulus and density of sawn wood beams made of radiata pine. In addition, we carry out several experimental tests on cross-laminated timber panels subject to bending, shear and compression loads. Our numerical predictions are compared with the experiments and are validated successfully, revealing the potential predictive capabilities of the present multi-scale modelling for the analysis of wood materials and timber structures.
Published: 2015
Full Text: View/download PDF

32. Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis

Author: Rafic M. Ajaj, F.A. DiazDelaO, Michael I. Friswell, and E.I. Saavedra Flores
Subjects: Materials science, business.industry, Composite number, Structural engineering, Extensibility, Finite element method, symbols.namesake, Ultimate tensile strength, Ceramics and Composites, Range (statistics), symbols, Composite material, business, Gaussian process, Uncertainty analysis, Civil and Structural Engineering, Parametric statistics
Abstract: This paper investigates the extensibility of the wood cell-wall composite in the presence of parametric uncertainty by means of a multi-scale finite element approach. Normally, the three fundamental phases in wood, that is, cellulose, lignin and hemicellulose, present considerable scatter in their microstructure and mechanical properties. Nevertheless, by considering uncertainty in their properties, a significant computational cost is added to the solution of a large set of realisations represented by expensive fully-coupled multi-scale analyses. In order to tackle this high cost, we build a statistical approximation to the output of the computer model. Following this strategy, several micromechanical parameters are perturbed to study their influence on the extensibility of the material under tensile loading conditions. By reducing the cost of performing uncertainty analysis of the homogenised mechanical response, we are able to estimate the 5-th, 50-th, and 95-th percentile of the ultimate tensile strains of the material. We contrast our numerical predictions with experimental data, finding a good agreement for a wide range of initial microfibril angles.
Published: 2014
Full Text: View/download PDF

33. Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins

Author: Mohannad H. Al-Saadi and Nour M. Ajaj-ALKordy
Subjects: Flexural fatigue, Acrylic resin, Materials science, medicine.medical_treatment, Dentistry, lcsh:Medicine, High-impact, Flexural strength, stomatognathic system, medicine, Composite material, General Dentistry, Elastic modulus, business.industry, Dentistry(all), lcsh:R, technology, industry, and agriculture, Denture, lcsh:RK1-715, Fracture, visual_art, lcsh:Dentistry, visual_art.visual_art_medium, Fracture (geology), Denture base, Original Article, Dentures, business
Abstract: Background: Fractures of acrylic resin dentures are a common occurrence in clinical dentistry. The denture may be fractured accidentally when dropped or while in service in the mouth due to flexural fatigue. Objectives: The aim of this study was to compare the elastic modulus and the flexural strength between two heat-cured acrylic resins used in denture bases: a high-impact resin (Lucitone 199) and a traditional resin (Rodex). Materials and methods: Rectangular strips of Lucitone 199 and Rodex (10 samples each) were fabricated and stored in artificial saliva at 37 °C for 2 weeks. The specimens were subjected to a three-point flexural test. The data were statistically analysed with Student’s t-test (p ⩽ .05). Results: The high-impact acrylic resin had a lower elastic modulus (p = .000) and higher flexural strength (p = .001) compared to the traditional acrylic resin. Conclusion: Within the limitations of this study, it can be concluded that the high-impact acrylic resin is a suitable denture base material for patients with clinical fracture of the acrylic denture. Keywords: Denture, Acrylic resin, Fracture, High-impact, Elastic modulus, Flexural strength
Published: 2014

34. Morphing aircraft: The need for a new design philosophy

Author: Michael I. Friswell, C.S. Beaverstock, and Rafic M. Ajaj
Subjects: Engineering drawing, Engineering, Philosophy of design, Exploit, business.industry, Aerospace Engineering, 02 engineering and technology, 01 natural sciences, 010305 fluids & plasmas, Morphing, 020303 mechanical engineering & transports, 0203 mechanical engineering, 0103 physical sciences, business
Abstract: This paper proposes a novel framework for classification of morphing technology based on its functionality, operation, and the structural layout. In addition, it highlights the limitations of the conventional design approach to exploit the benefits of the technology using representative examples and results.
Published: 2016

35. Twist Morphing Using the Variable Cross Section Spar: Feasibility Study

Author: Mostefa Bourchak, Rafic M. Ajaj, and W. Harasani
Subjects: Airfoil, Engineering, Wing, business.industry, Mechanical Engineering, Aerospace Engineering, Torsion (mechanics), Structural engineering, Aerodynamics, Aeroelasticity, Morphing, General Materials Science, Spar, business, Aerodynamic center, Civil and Structural Engineering
Abstract: This paper presents the variable cross section spar (VCSpar) concept that facilitates varying the shear center position relative to the aerodynamic center, allowing the external aerodynamic loads to twist the structure and maintain its deformed shape. The VCSpar is considered in this paper as integrated within the wing of a representative unmanned aerial vehicle (UAV) to enhance its flight performance and control authority. A preliminary design study was conducted to assess the potential benefits of the concept using a low-fidelity design tool. Then, aeroelastic modeling of the concept was performed where the VCSpar was modeled as a two-dimensional equivalent aerofoil using bending and torsion shape functions to express the equations of motion in terms of the twist angle and plunge displacement at the wingtip. The aerodynamic lift and moment acting on the equivalent aerofoil were modeled using Theodorsen’s unsteady aerodynamic theory. A low-dimensional state-space representation of an empirical Theodorsen’s transfer function was adopted to allow time-domain analyses.
Published: 2015
Full Text: View/download PDF

36. Flight Dynamics and Control Using Folding Wingtips: An Experimental Study

Author: Rafic M. Ajaj and Josh Mills
Subjects: 020301 aerospace & aeronautics, Engineering, morphing aircraft, flight control, wingtips, Wing, business.industry, Directional stability, Aerospace Engineering, 02 engineering and technology, Flight control surfaces, Structural engineering, Folding (DSP implementation), law.invention, 020303 mechanical engineering & transports, 0203 mechanical engineering, Aileron, Flight dynamics, law, Control theory, Range (aeronautics), Dynamic pressure, business
Abstract: This paper presents an experimental investigation on using FOLDing wingtips sERving as cONtrol effectorS (FOLDERONS) for a mini Unmanned Aerial Vehicle (UAV). A representative off-the-shelf mini-UAV with a conventional configuration was selected. The main theme of this paper is to utilise FOLDERONS as a control effector (mainly in roll) to augment the control authority of conventional control surfaces. Furthermore, the impact of actuation rate on the effectiveness of FOLDERONS is assessed. The paper describes the preliminary and detailed design and sizing of the morphing wing. In addition, the manufacturing of the wing system and its integration with the UAV are addressed. Wind-tunnel testing in the RJ Mitchell wind-tunnel at the University of Southampton was performed. Both static (straight and sideslip) and dynamic (straight flight) tests are conducted at a range of airspeeds and Angles Of Attack (AOAs). The impact of folding wingtips on the lateral and directional stability is analysed. The main finding of this paper is that FOLDERONS are effective (especially at large dynamic pressure and AOAs) in controlling the lateral and directional stability. Finally, this study shows that FOLDERONS cannot fully replace conventional ailerons especially at low dynamic pressures, and their strong dependence on the AOA makes them prone to a roll reversal phenomena when the wing (and FOLDERONS) is operating at negative AOAs.
Published: 2017
Full Text: View/download PDF

37. Span morphing using the compliant spar

Author: R. M. Ajaj, E. I. Saavedra Flores, M. I. Friswell, and F. A. Diaz De la O
Subjects: Universal joint, Engineering, business.industry, Mechanical Engineering, Aerospace Engineering, Mechanical engineering, Stiffness, Structural engineering, Bending, Span (engineering), law.invention, Morphing, law, medicine, General Materials Science, Spar, medicine.symptom, business, Wingspan, Joint (geology), Civil and Structural Engineering
Abstract: This paper develops and models the Compliant Spar concept that allows the wing span to be varied to provide roll control and enhance the operational performance for a medium altitude long endurance (MALE) UAV. The wing semi-span is split into morphing partitions and the concept maybe incorporated in each partition; however only the tip partition is considered here. The Compliant Spar is made of compliant joints arrange in series to allow the partition to be flexible under axial (spanwise) loads but at the same time stiff enough to resist bending loads. Each compliant joint consists of two concentric overlapping AL 2024-T3 tubes joined together using elastomeric material. Under axial (spanwise) loading, the elastomeric material deforms in shear allowing the overlapping distance between the tubes to vary and hence the length (in the spanwise direction) of the joint/spar to vary. High fidelity modelling of the concept is performed. Then, structural optimisation studies are performed to minimise the axial stiffness and the structural mass of the concept for various design constraints. The flexible skin and actuation system to be used are also addressed.
Published: 2014

38. Design and Optimisation of Composite Corrugated Skin for a Span Morphing Wing

Author: Rafic M. Ajaj, Michael I. Friswell, and Yuying Xia
Subjects: XFOIL, Engineering, business.industry, Stiffness, Structural engineering, Aerodynamics, Finite element method, Morphing, Camber (aerodynamics), Parametric model, medicine, medicine.symptom, business, Lattice multiplication
Abstract: The concept of span morphing aircraft is attracting a lot of attention due to the demands to enhance flight performance and control authority. Corrugated laminates provide a good solution for the skin of a span morphing wing due to their extremely anisotropic behaviour. Although corrugated skins have been proposed for camber morphing, they have not been proposed for span morphing. Hence the main focus of this paper is to optimise the geometry of the corrugated skin to minimize the axial stiffness, with constraints of material strength limits and out-of-plane deformations due to the aerodynamics. Two aerodyanic solvers, Tornado Vortex Lattice Method (VLM) and XFOIL, are compared and a Genetic Algorithm (GA) is used as the optimizer. Parametric modeling and calculation by ANSYS APDL was used to generate the finite element model and perform the analysis automatically based on the global and local geometric parameters. The parameter sensitivity is also analyzed and discussed. The optimization results show that XFOIL is more accurate than VLM for this analysis. The maximum displacement constraint causes the optimizer to choose fewer corrugations rather than increase the sheet thickness. This implies that the thickness has a higher impact than the number of corrugations on the axial stiffness. The optimization results show that the corrugation height and angle are maximized as they seem to have less influence on the maximum out-of-plane displacement.
Published: 2014
Full Text: View/download PDF

39. An integrated conceptual design study using span morphing technology

Author: Andy J. Keane, Erick I. Saavedra Flores, Sondipon Adhikari, Giuliano Allegri, Rafic M. Ajaj, Askin T. Isikveren, and Michael I. Friswell
Subjects: 020301 aerospace & aeronautics, 0209 industrial biotechnology, Operational performance, Engineering, business.industry, Mechanical Engineering, Control engineering, 02 engineering and technology, Span (engineering), Morphing, 020901 industrial engineering & automation, 0203 mechanical engineering, Conceptual design, Systems engineering, General Materials Science, business
Abstract: A comprehensive conceptual design study is performed to assess the potential benefits of span morphing technology and to determine its feasibility when incorporated on medium altitude long endurance unmanned air vehicles. A representative medium altitude long endurance unmanned air vehicle based on the BAE Systems Herti unmanned air vehicle was selected. Stability and control benefits are investigated by operating the morphing span asymmetrically to replace conventional ailerons. The Tornado vortex lattice method was incorporated for aerodynamic predictions. The sensitivity of rolling moment generated by span morphing for different flight parameters (instantaneous vehicular weight and angle of attack) is studied. The variation of roll rate (steady and transient response) with span morphing (for constant rolling moment) for different rolling strategies (extension and retraction) is investigated. It turns out that the optimum rolling strategy is to extend one side of the wing by 22% while retract the other by 22%. Operational performance benefits are investigated by operating the morphing span symmetrically to reduce drag, increase endurance and reduce take-off and landing distances. Twenty-two per cent symmetric span morphing reduces the total drag by 13%, enhances the endurance capability by 6.5% and reduces the take-off field length and landing distance by 28% and 10%, respectively.
Published: 2014

40. The Zigzag wingbox for a span morphing wing

Author: Wulf G. Dettmer, E.I. Saavedra Flores, Benjamin K.S. Woods, Askin T. Isikveren, Giuliano Allegri, Michael I. Friswell, and Rafic M. Ajaj
Subjects: 020301 aerospace & aeronautics, Engineering, Wing, business.industry, Aerospace Engineering, 02 engineering and technology, Aerodynamics, Structural engineering, Span (engineering), 7. Clean energy, Morphing, 020303 mechanical engineering & transports, 0203 mechanical engineering, Fuselage, Zigzag, Fuel tank, business, Wingspan
Abstract: This paper presents the Zigzag wingbox concept that allows the wing span to be varied by 44% (22% extension and 22% retraction). The Zigzag wingbox consists of a rigid part and a morphing part. The rigid part is a semi-monocoque construction that houses the fuel tank and transfers the aerodynamic loads from the morphing part to the fuselage. The morphing part consists of various morphing partitions where in each partition there are two spars each consisting of two beams hinged together. Each morphing partition is covered by flexible skin and is bounded by two ribs through which the spars are connected. The ribs transfer the loads between the spars of adjacent morphing partitions and serves as the main structure to which the flexible skins are to be attached. The Zigzag wingbox concept is then incorporated in the rectangular wing of a medium altitude long endurance (MALE) UAV to enhance its operational performance and provide roll control. Equivalent modelling and preliminary sizing of the concept are performed to assess its feasibility and quantify its potential benefits.
Published: 2013

41. Multi-Objective Optimization for the Multiphase Design of Active Polymorphing Wings

Author: Rafic M. Ajaj, Michael I. Friswell, D. D. Smith, and Askin T. Isikveren
Subjects: Lift-to-drag ratio, 020301 aerospace & aeronautics, Engineering, business.industry, Multidisciplinary design optimization, Aerospace Engineering, 02 engineering and technology, Wing fence, 01 natural sciences, Multi-objective optimization, 010305 fluids & plasmas, 0203 mechanical engineering, Flight envelope, Landing performance, 0103 physical sciences, Climb, Wingtip device, Aerospace engineering, business
Abstract: Advanced studies have been undertaken using Multidisciplinary Design Optimization (MDO) on the retrofitting of an outboard morphing wing system to an existing conventionally designed commercial passenger jet. Initial studies focusing on the single objective of specific air range improvement for a number of flight phases revealed increases of approximately 4-5% over the baseline aircraft with wing fences across each case. This validated the advantage of re-optimizing the geometric schedules for off-design conditions in comparison with fixed winglets, for which negative effects were observed. Due to the high number of design sensitivities of the outboard wing geometry it has now become necessary to conduct refined studies to analyse the effects of the wing system on additional operational performance metrics, such as take-off, initial climb, approach-climb and landing performance parameters, in order to ascertain a truly holistic representation of the benefits of morphing wing technology. In addition, further effort has been expended to couple the effects of each phase within a multiobjective framework. Thus, refined studies have been performed, incorporating a number of multiobjective optimization methods into a high-end, low fidelity aero-structural-control analysis together with a full engine model and integrated operational performance algorithm. Furthermore, updated aeroelastic functionality and improved aero-structural wing sizing allows for investigation of C-wing configurations. Results reveal the potential for significant field length reductions and climb performance enhancements, while maintaining improvements in cruise performance throughout the entire flight envelope and across multiple stage lengths.
Published: 2012

42. A Review of Morphing Aircraft

Author: Onur Bilgen, Rafic M. Ajaj, Michael I. Friswell, Silvestro Barbarino, and Daniel J. Inman
Subjects: Airfoil, Chord (aeronautics), 020301 aerospace & aeronautics, Engineering, Shape change, Wing, business.industry, Mechanical Engineering, 02 engineering and technology, Structural engineering, Morphing wing, Planform, GeneralLiterature_MISCELLANEOUS, Morphing, 020303 mechanical engineering & transports, 0203 mechanical engineering, Camber (aerodynamics), General Materials Science, business, ComputingMethodologies_COMPUTERGRAPHICS
Abstract: Aircraft wings are a compromise that allows the aircraft to fly at a range of flight conditions, but the performance at each condition is sub-optimal. The ability of a wing surface to change its geometry during flight has interested researchers and designers over the years as this reduces the design compromises required. Morphing is the short form for metamorphose; however, there is neither an exact definition nor an agreement between the researchers about the type or the extent of the geometrical changes necessary to qualify an aircraft for the title ‘shape morphing.’ Geometrical parameters that can be affected by morphing solutions can be categorized into: planform alteration (span, sweep, and chord), out-of-plane transformation (twist, dihedral/gull, and span-wise bending), and airfoil adjustment (camber and thickness). Changing the wing shape or geometry is not new. Historically, morphing solutions always led to penalties in terms of cost, complexity, or weight, although in certain circumstances, these were overcome by system-level benefits. The current trend for highly efficient and ‘green’ aircraft makes such compromises less acceptable, calling for innovative morphing designs able to provide more benefits and fewer drawbacks. Recent developments in ‘smart’ materials may overcome the limitations and enhance the benefits from existing design solutions. The challenge is to design a structure that is capable of withstanding the prescribed loads, but is also able to change its shape: ideally, there should be no distinction between the structure and the actuation system. The blending of morphing and smart structures in an integrated approach requires multi-disciplinary thinking from the early development, which significantly increases the overall complexity, even at the preliminary design stage. Morphing is a promising enabling technology for the future, next-generation aircraft. However, manufacturers and end users are still too skeptical of the benefits to adopt morphing in the near future. Many developed concepts have a technology readiness level that is still very low. The recent explosive growth of satellite services means that UAVs are the technology of choice for many investigations on wing morphing. This article presents a review of the state-of-the-art on morphing aircraft and focuses on structural, shape-changing morphing concepts for both fixed and rotary wings, with particular reference to active systems. Inflatable solutions have been not considered, and skin issues and challenges are not discussed in detail. Although many interesting concepts have been synthesized, few have progressed to wing tunnel testing, and even fewer have flown. Furthermore, any successful wing morphing system must overcome the weight penalty due to the additional actuation systems.
Published: 2011

43. Special Issue: Adaptive/Smart Structures and Multifunctional Materials with Application to Morphing Aircraft

Author: Rafic M. Ajaj
Subjects: Engineering, business.industry, lcsh:Motor vehicles. Aeronautics. Astronautics, Aerospace Engineering, ComputerApplications_COMPUTERSINOTHERSYSTEMS, GeneralLiterature_MISCELLANEOUS, Morphing, n/a, Systems engineering, Aerospace engineering, lcsh:TL1-4050, business, Aerospace, ComputingMethodologies_COMPUTERGRAPHICS
Abstract: Recent advances in smart structures and multifunctional materials have facilitated many novel aerospace technologies such as morphing aircraft. A morphing aircraft, bio-inspired by natural fliers, has gained a lot of interest as a potential technology to meet the ambitious goals of the Advisory Council for Aeronautics Research in Europe (ACARE) Vision 2020 and the FlightPath 2050 documents. A morphing aircraft continuously adjusts its wing geometry to enhance flight performance, control authority, and multi-mission capability.[...]
Published: 2014

44. Characterization of a Test for Invasive Breast Cancer Using X-ray Diffraction of Hair—Results of a Clinical Trial

Author: Phillip G. Yuile, Dharmica A.H. Mistry, Myungae Lee, Peter William French, Joseph Haklani, Kevin Phan, Mariam M. Ajaj, and Gary L. Corino
Subjects: Cancer Research, medicine.medical_specialty, lcsh:RC254-282, law.invention, Breast cancer, breast cancer, Randomized controlled trial, law, Biopsy, synchrotron, Medicine, Mammography, Original Research, medicine.diagnostic_test, business.industry, Cancer, hair, Gold standard (test), medicine.disease, randomized clinical trial, lcsh:Neoplasms. Tumors. Oncology. Including cancer and carcinogens, X-ray diffraction, Clinical trial, medicine.anatomical_structure, Oncology, Scalp, Radiology, business, Biomedical engineering
Abstract: Objective: To assess the performance of a test for breast cancer utilizing synchrotron x-ray diffraction analysis of scalp hair from women undergoing diagnostic radiology assessment. Design and Setting: A double-blinded clinical trial of women who attended diagnostic radiology clinics in Australia. Patients: 1796 women referred for diagnostic radiology, with no previous history of cancer. Main Outcome Measures: Sensitivity, specificity and accuracy of the hair test analysis compared to the gold standard of imaging followed by biopsy where indicated. Results: The hair-based assay had an overall accuracy of >77% and a negative predictive value of 99%. For all women, the sensitivity of both mammography and x-ray diffraction alone was 64%, but when used together the sensitivity rose to 86%. The sensitivity of the hair test for women under the age of 70 was 74%. Conclusion: In this large population trial the association between the presence of breast cancer and an altered hair fibre X-ray diffraction pattern previously reported has been confirmed. It appears that mammography and X-ray diffraction of hair detect different populations of breast cancers, and are synergistic when used together.
Published: 2009

45. Hyperelastic tension of graphene

Author: Rafic M. Ajaj, Michael I. Friswell, Rafael Castro-Triguero, E.I. Saavedra Flores, Iman Dayyani, and Sondipon Adhikari
Subjects: Materials science, Physics and Astronomy (miscellaneous), Ogden, Continuum mechanics, Quantitative Biology::Tissues and Organs, Physics::Medical Physics, Interatomic potential, Context (language use), Elasticity (physics), Poisson's ratio, symbols.namesake, Molecular dynamics, Classical mechanics, Hyperelastic material, symbols
Abstract: In this paper, we investigate the hyperelastic tensile behaviour of single layer graphene sheets (SLGSs). A one-term incompressible Ogden-type hyperelastic model is chosen to describe the mechanical response of C-C bonds. By establishing equality between the Ogden strain-energy and the variation of the Tersoff-Brenner interatomic potential, three different geometries of SLGSs are studied under tensile loading. We compute the Young's modulus, the finite-deformation Poisson's ratio, ultimate strains, total reactions, and the variation of the potential energy per carbon atom for large strains. Numerical simulations are compared with results obtained by molecular mechanics and molecular dynamics simulations, finite elements, continuum mechanics theory, and experiments. Our predictions are validated, revealing the potential predictive capabilities of the present hyperelastic framework for the analysis of graphene in the context of infinitesimal and large deformations. The good agreement found between our calculations and the published data suggests that graphene may be described as a hyperelastic material.
Published: 2015
Full Text: View/download PDF

46. A review on shape memory alloys with applications to morphing aircraft

Author: Iman Dayyani, Silvestro Barbarino, Rafic M. Ajaj, E.I. Saavedra Flores, and Michael I. Friswell
Subjects: Materials science, Iterative method, business.industry, Bandwidth (signal processing), Shape-memory alloy, Structural engineering, Condensed Matter Physics, Smart material, Atomic and Molecular Physics, and Optics, Nonlinear system, Morphing, Mechanics of Materials, Power consumption, Signal Processing, General Materials Science, Electrical and Electronic Engineering, business, Actuator, ComputingMethodologies_COMPUTERGRAPHICS, Civil and Structural Engineering
Abstract: Shape memory alloys (SMAs) are a unique class of metallic materials with the ability to recover their original shape at certain characteristic temperatures (shape memory effect), even under high applied loads and large inelastic deformations, or to undergo large strains without plastic deformation or failure (super-elasticity). In this review, we describe the main features of SMAs, their constitutive models and their properties. We also review the fatigue behavior of SMAs and some methods adopted to remove or reduce its undesirable effects. SMAs have been used in a wide variety of applications in different fields. In this review, we focus on the use of shape memory alloys in the context of morphing aircraft, with particular emphasis on variable twist and camber, and also on actuation bandwidth and reduction of power consumption. These applications prove particularly challenging because novel configurations are adopted to maximize integration and effectiveness of SMAs, which play the role of an actuator (using the shape memory effect), often combined with structural, load-carrying capabilities. Iterative and multi-disciplinary modeling is therefore necessary due to the fluid–structure interaction combined with the nonlinear behavior of SMAs.
Published: 2014
Full Text: View/download PDF

47. Humanitarian Intervention: Second Reading of the Charter of the United Nations

Author: Ahmad M. Ajaj
Subjects: United Nations Charter, Law, Political science, Charter, Customary international law, International law, Humanitarian intervention, Legitimacy, Use of force, Peacekeeping
Abstract: 1 he theory of humanitarian intervention has never enjoyed as much legitimacy as it does today. Nevertheless, the theory was not wholeheartedly accepted as a rule of contemporary international law but was criticised and rejected by many scholars as inadequate because it represents a violation of the complete and explicit ban on the use of force found in the United Nations Charter. This article investigates the validity of the theory under both customary and contemporary international law. It starts with determining the meaning of the theory and its legal basis in customary international law and the Charter of the United Nations. It also attempts to set up criteria designed to safeguard the theory from potential misuse.
Published: 1993
Full Text: View/download PDF

48. Prevalence and Predictors of Tunneled Dialysis Catheter Dysfunction.

Author: Rozenberg I, Benchetrit S, Zitman-Gal T, Ajaj M, Shehab M, Nacasch N, and Cohen-Hagai K
Subjects: Humans, Retrospective Studies, Male, Female, Prevalence, Middle Aged, Aged, Jugular Veins, Central Venous Catheters adverse effects, Equipment Failure statistics & numerical data, Risk Factors, Kidney Failure, Chronic therapy, Kidney Failure, Chronic epidemiology, Israel epidemiology, Follow-Up Studies, Renal Dialysis methods, Renal Dialysis adverse effects, Catheterization, Central Venous adverse effects, Catheterization, Central Venous methods, Catheters, Indwelling adverse effects
Abstract: Background: Hemodialysis requires reliable, recurrent access to the circulatory system. Central venous tunneled dialysis catheters (TDC) are frequently used for patients receiving hemodialysis as a bridge to permanent vascular access or as a final option. TDC are prone to complications such as infection and dysfunction., Objectives: To assess the prevalence and predictors of TDC dysfunction in a cohort of chronic hemodialysis patients., Methods: This single-center, retrospective study was based on data from an electronic database of chronic hemodialysis patients during 5 years of follow-up., Results: A total of 625 TDC were inserted in 361 patients, of which 234 (37.4%) were replaced due to dysfunction. The main insertion site was the right internal jugular vein. Diabetes mellitus was an important predictor of TDC dysfunction and was significantly correlated with TDC extraction. Chronic anticoagulation and antiplatelet treatment did not affect the rate of TDC dysfunction or replacement., Conclusions: TDC use for chronic dialysis patients is increasing and dysfunction is a major problem. In our study, we highlighted the high prevalence of TDC dysfunction and the need for further research to improve hemodialysis access as well as TDC patency and function.
Published: 2024

49. Low-level laser therapy effectiveness in reducing initial orthodontic archwire placement pain in premolars extraction cases: a single-blind, placebo-controlled, randomized clinical trial.

Author: AlSayed Hasan MMA, Sultan K, Ajaj M, Voborná I, and Hamadah O
Subjects: Adolescent, Adult, Bicuspid, Humans, Orthodontic Wires, Pain etiology, Retrospective Studies, Single-Blind Method, Young Adult, Low-Level Light Therapy
Abstract: Background: The objective of this randomized clinical trial was to evaluate Low-Level Laser Therapy (LLLT) effectiveness in spontaneous and chewing pain reduction following initial orthodontic archwire placement., Methods: 26 patients (mean age 20.07 ± 3.13 years) with maxillary Little's Irregularity Index (LII) of 7 mm or more that indicates first maxillary premolars extraction and no medications intake were eligible for this trial. Patients were randomly assigned with 1:1 ratio using simple randomization technique to receive either LLL or placebo treatment. Blinding was applicable for patients only. In the laser group, patients received a single LLL dose (wavelength 830 nm, energy 2 J/point) in four points (2 buccal, 2 palatal) for each maxillary anterior tooth root. Patients in the placebo group had the same laser application procedure without emitting the laser beam. Patients were asked to score spontaneous and chewing pain intensity by filling out a questionnaire with a 100-mm Visual Analogue Scale (VAS) after 1, 6, 24, 48, and 72 h of treatment application. Independent t-test was used to compare the mean pain scores between the laser and placebo groups for both spontaneous and chewing pain at each studied time point., Results: No dropout occurred so the results of the 26 patients were statistically analyzed. Despite some clinical differences observed between the two groups, no statistical significance was found for each studied time point (p > 0.05) for both spontaneous and chewing pain except after 72 h for chewing pain with a VAS score of (18.84 ± 13.44) mm for the laser group compared to (38.15 ± 27.06) mm for the placebo group., Conclusions: LLLT, with the suggested parameters, is not effective in pain reduction following initial orthodontic archwire placement., Trial Registration: Name of the registry: Clinicaltrials.gov Trial registration number: NCT02568436. Date of registration: 26 September 2015 'Retrospectively registered'.
Published: 2020
Full Text: View/download PDF

50. Ultrasound-Guided Thrombin Injection for Iliopsoas Pseudoaneurysm.

Author: Weissmann J, Griton Y, Mahajna S, Ajaj M, and Fajer S
Abstract: Bilateral iliopsoas hematoma is an uncommon phenomenon, which has been described in individuals receiving anticoagulation therapy. The hematoma is caused by bleeding of arteries to the muscle. In rare cases, pseudoaneurysms can also be formed. We present a case of an adolescent, with partial factor XI deficiency, who experienced a mild fall. Imaging studies revealed large bilateral iliopsoas hematomas and bilateral iliopsoas pseudoaneurysms. One pseudoaneurysm was demonstrated by angiography and was embolized with micro coils. The second, more persistent one, was sealed via ultrasound-guided thrombin injection, with excellent morphological and clinical results.
Published: 2019
Full Text: View/download PDF

Catalog

Books, media, physical & digital resources

See catalog results

Searchworks

Select search scope, currently: Articles Catalog books, media & more in Jio Institute collections Articles journal articles & other e-resources

Search

Search Constraints

Refine your results

Search Limiters

Topic

Publication Year Range

Language

Publication Type

Journal

Database

Publisher

61 results on '"M. Ajaj"'

Search Results

Catalog

Select search scope, currently: Articles

Catalog

books, media & more in Jio Institute collections

Articles

journal articles & other e-resources