Search

An investigation on the microflora of home-made Sardinian sausage was carried out. Two batches of sausages produced according to traditional methods by two artisanal producers were analysed during ripening. A total of 91 lactic acid bacteria (LAB) and 60 coagulase-negative staphylococci (CNS) were isolated and identified by species-specific PCR or 16s rDNA sequencing. the lactic microflora was mainly constituted by Lactobacillus sakei (80% of isolates) and Lactobacillus curvatus (15% of isolates), Leuconostoc mesenteroides and Lactobacillus reuteri were also found. Among cNs, Staphylococcus xylosus was the main species isolated. The incidence of Enterobacteriaceae can be considered safe. The pH values were relatively high in both batches. This investigation indicates that home-made Sardinian sausages can be classified as a typical Mediterranean-type of dry, naturally-fermented sausages, characterised by a low acidification rate and high final pH. [ABSTRACT FROM AUTHOR]

Three-dimensional (3D) applications lead the digital transition toward more immersive and interactive multimedia technologies. Point clouds (PCs) are a fundamental element in capturing and rendering 3D digital environments, but they present significant challenges due to the large amount of data typically needed to represent them. Although PC compression techniques can reduce the size of PCs, they introduce degradations that can negatively impact the PC's quality and therefore the object representation's accuracy. This trade-off between data size and PC quality highlights the critical importance of PC quality assessment (PCQA) techniques. In this article, we review the state-of-the-art no-reference (NR) objective quality metrics for PCs, which can accurately estimate the quality of generated and compressed PCs solely based on feature information extracted from the distorted PC. These characteristics make NR PCQA metrics particularly suitable in real-world application scenarios where the original PC data are unavailable for comparison, such as in streaming applications.

Genome-Wide Association Studies (GWASs) have identified a huge number of variants associated with different traits. However, their validation through in vitro and in vivo studies often lags well behind their identification. For variants associated with traits or diseases of biomedical interest, this gap delays the development of possible therapies. This issue also impacts beta-hemoglobinopathies, such as beta-thalassemia and sickle cell disease (SCD). The definitive cures for these diseases are currently bone marrow transplantation and gene therapy. However, limitations regarding their effective use restrict their worldwide application. Great efforts have been made to identify whether modulators of fetal hemoglobin (HbF) and, to a lesser extent, hemoglobin A2 (HbA 2 ) are possible therapeutic targets. Herein, we performed the post-GWAS in vivo validation of two genes, cyclin D3 ( CCND3 ) and nuclear factor I X ( NFIX ), previously associated with HbF and HbA 2 levels. The absence of Ccnd3 expression in vivo significantly increased g (HbF) and d (HbA 2 ) globin gene expression. Our data suggest that CCND3 is a possible therapeutic target in sickle cell disease. We also confirmed the association of Nfix with γ-globin gene expression and present data suggesting a possible role for Nfix in regulating Kruppel-like transcription factor 1 ( Klf1 ), a master regulator of hemoglobin switching. This study contributes to filling the gap between GWAS variant identification and target validation for beta-hemoglobinopathies.

The abnormal deposition of protein in the brain is the central factor in neurodegenerative disorders (NDs). These detrimental aggregates, stemming from the misfolding and subsequent irregular aggregation of α-synuclein protein, are primarily accountable for conditions such as Parkinson's disease, Alzheimer's disease, and dementia. Two-photon-excited (TPE) probes are a promising tool for the early-stage diagnosis of these pathologies as they provide accurate spatial resolution, minimal intrusion, and the ability for prolonged observation. To identify compounds with the potential to function as diagnostic probes using two-photon techniques, we explore three distinct categories of compounds: Hydroxyl azobenzene (AZO-OH); Dicyano-vinyl bithiophene (DCVBT); and Tetra-amino phthalocyanine (PcZnNH 2 ). The molecules were structurally and optically characterized using a multi-technique approach via UV-vis absorption, Raman spectroscopy, three-dimensional fluorescence mapping (PLE), time-resolved photoluminescence (TRPL), and pump and probe measurements. Furthermore, quantum chemical and molecular docking calculations were performed to provide insights into the photophysical properties of the compounds as well as to assess their affinity with the α-synuclein protein. This innovative approach seeks to enhance the accuracy of in vivo probing, contributing to early Parkinson's disease (PD) detection and ultimately allowing for targeted intervention strategies.

Long afterglow phosphors constitute an emerging class of compounds with wide application in several fields, from photonic to dosimetry, solar energy storage and photocatalysis. In this study, we synthesized and thoroughly characterized a new class of persistent emitting materials, Ca 3 Ga 4 O 9 : xBi 3+ , yZn 2+ , zTb 3+ . Through the utilization of X-ray and Raman spectroscopy, as well as optical measurements including static and time-resolved luminescence, thermoluminescence, and phosphorescence, the effects of the Tb concentration on the optical and structural properties of the material has been deeply studied. A suitable mechanism was proposed to account for the long afterglow emission, wherein Tb3+ and Bi3+ ions occupying the Ca2+ sites serve as recombination centers, facilitating the generation of oxygen defects. Zn 2+ in the Ga 3+ sites, contribute to the charge balance and generates hole traps in the matrix. The enduring phosphorescence persists for over 3 h following the cessation of UV irradiation, discernible to the naked eye in low-light conditions., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author(s).)

Fluorescent lighting and optical techniques have been widely utilized to enhance the detection of latent fingerprints. However, the development of new techniques is imperative to expand the range of surfaces from which latent fingerprints can be detected. When relying on traditional methods, fingerprint evidence can remain undetected or even disregarded due to insufficient detection and limited detail, especially when dealing with a luminescent background. In this study, we propose the utilization of optically stimulated luminescence (OSL) applied to a Ba 2 SiO 4 matrix, co-doped with Eu 2+ and Dy 3+ , as a powerful method for visualizing latent fingerprints on various surfaces, including thin plastic bags, rigid duct tape, thin aluminum foil, and glass slices. This technique effectively eliminates any luminescent background and significantly enhances optical imaging. This represents the first successful application of OSL in the development of latent fingerprints, thus paving the way for more efficient and effective forensic techniques in the future., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

Sickle cell disease (SCD) is caused by the homozygous beta-globin gene mutation that can lead to ischemic multi-organ damage and consequently reduce life expectancy. On the other hand, sickle cell trait (SCT), the heterozygous beta-globin gene mutation, is still considered a benign condition. Although the mechanisms are not well understood, clinical evidence has recently shown that specific pathological symptoms can also be recognized in SCT carriers. So far, there are still scant data regarding the morphological modifications referable to possible multi-organ damage in the SCT condition. Therefore, after genotypic and hematological characterization, by conventional light microscopy and transmission electron microscopy (TEM), we investigated the presence of tissue alterations in 13 heterozygous Townes mice, one of the best-known animal models that, up to now, was used only for the study of the homozygous condition. We found that endothelial alterations, as among which the thickening of vessel basal lamina, are ubiquitous in the lung, liver, kidney, and spleen of SCT carrier mice. The lung shows the most significant alterations, with a distortion of the general tissue architecture, while the heart is the least affected. Collectively, our findings contribute novel data to the histopathological modifications at microscopic and ultrastructural levels, underlying the heterozygous beta-globin gene mutation, and indicate the translational suitability of the Townes model to characterize the features of multiple organ involvement in the SCT carriers.

It is well known that viruses cannot replicate on their own but only inside the cells of target tissues in the organism, resulting in the destruction of the cells or, in some cases, their transformation into cancer cells. While viruses have relatively low resistance in the environment, their ability to survive longer is based on environmental conditions and the type of substrate on which they are deposited. Recently, the potential for safe and efficient viral inactivation by photocatalysis has garnered increasing attention. In this study, the Phenyl carbon nitride/TiO 2 heterojunction system, a hybrid organic-inorganic photocatalyst, was utilized to investigate its effectiveness in degrading the flu virus (H1N1). The system was activated by a white-LED lamp, and the process was tested on MDCK cells infected with the flu virus. The results of the study demonstrate the hybrid photocatalyst's ability to cause the virus to degrade, highlighting its effectiveness for safe and efficient viral inactivation in the visible light range. Additionally, the study underscores the advantages of using this hybrid photocatalyst over traditional inorganic photocatalysts, which typically only work in the ultraviolet range.

Recent developments in lighting and display technologies have led to an increased focus on materials and phosphors with high efficiency, chemical stability, and eco-friendliness. Mechanoluminescence (ML) is a promising technology for new lighting devices, specifically in pressure sensors and displays. CaZnOS has been identified as an efficient ML material, with potential applications as a stress sensor. This study focuses on optimizing the mechanoluminescent properties of CaZnOS:Tb through microwave-assisted synthesis. We successfully synthesized CaZnOS doped with Tb3+ using this method and compared it with samples obtained through conventional solid-state methods. We analyzed the material's characteristics using various techniques to investigate their structural, morphological, and optical properties. We then studied the material's mechanoluminescent properties through single impacts with varying energies. Our results show that materials synthesized through microwave methods exhibit similar optical and, primarily, mechanoluminescent properties, making them suitable for use in photonics applications. The comparison of the microwave and conventional solid-state synthesis methods highlights the potential of microwave-assisted methods to optimize the properties of mechanoluminescent materials for practical applications.

The differences between bare carbon dots (CDs) and nitrogen-doped CDs synthesized from citric acid as a precursor are investigated, aiming at understanding the mechanisms of emission and the role of the doping atoms in shaping the optical properties. Despite their appealing emissive features, the origin of the peculiar excitation-dependent luminescence in doped CDs is still debated and intensively being examined. This study focuses on the identification of intrinsic and extrinsic emissive centers by using a multi-technique experimental approach and computational chemistry simulations. As compared to bare CDs, nitrogen doping causes the decrease in the relative content of O-containing functional groups and the formation of both N-related molecular and surface centers that enhance the quantum yield of the material. The optical analysis suggests that the main emission in undoped nanoparticles comes from low-efficient blue centers bonded to the carbogenic core, eventually with surface-attached carbonyl groups, the contribution in the green range being possibly related to larger aromatic domains. On the other hand, the emission features of N-doped CDs are mainly due to the presence of N-related molecules, with the computed absorption transitions calling for imidic rings fused to the carbogenic core as the potential structures for the emission in the green range.

In this work, we unveil the fluorescence features of citric acid and urea-based Carbon Dots (CDs) through a photo-physical characterization of nanoparticles synthesized, under solvent-free and open-air conditions, within silica-ordered mesoporous silica, as a potential host for solid-state emitting hybrids. Compared to CDs synthesized without silica matrices and dispersed in water, silica-CD hybrids display a broader emission in the green range whose contribution can be increased by UV and blue laser irradiation. The analysis of hybrids synthesized within different silica (MCM-48 and SBA-15) calls for an active role of the matrix in directing the synthesis toward the formation of CDs with a larger content of graphitic N and imidic groups at the expense of N-pyridinic molecules. As a result, CDs tuned in size and with a larger green emission are obtained in the hybrids and are retained once extracted from the silica matrix and dispersed in water. The kinetics of the photo-physics under UV and blue irradiation of hybrid samples show a photo-assisted formation process leading to a further increase of the relative contribution of the green emission, not observed in the water-dispersed reference samples, suggesting that the porous matrix is involved also in the photo-activated process. Finally, we carried out DFT and TD-DFT calculations on the interaction of silica with selected models of CD emitting centers, like surface functional groups (OH and COOH), dopants (graphitic N), and citric acid-based molecules. The combined experimental and theoretical results clearly indicate the presence of molecular species and surface centers both emitting in the blue and green spectral range, whose relative contribution is tuned by the interaction with the surrounding media., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Porous organic polymers are versatile platforms, easily adaptable to a wide range of applications, from air filtering to energy devices. Their fabrication via vat photopolymerization enables them to control the geometry on a multiscale level, obtaining hierarchical porosity with enhanced surface-to-volume ratio. In this work, a photocurable ink based on 1,6 Hexanediol diacrylate and containing a high internal phase emulsion (HIPE) is presented, employing PLURONIC F-127 as a surfactant to generate stable micelles. Different parameters were studied to assess the effects on the morphology of the pores, the printability and the mechanical properties. The tests performed demonstrates that only water-in-oil emulsions were suitable for 3D printing. Afterwards, 3D complex porous objects were printed with a Digital Light Processing (DLP) system. Structures with large, interconnected, homogeneous porosity were fabricated with high printing precision (300 µm) and shape fidelity, due to the addition of a Radical Scavenger and a UV Absorber that improved the 3D printing process. The formulations were then used to build scaffolds with complex architecture to test its application as a filter for CO 2 absorption and trapping from environmental air. This was obtained by surface decoration with NaOH nanoparticles. Depending on the surface coverage, tested specimens demonstrated long-lasting absorption efficiency.

The straightforward, continuous-flow synthesis of cyclopropyl carbaldehydes and ketones has been developed starting from 2-hydroxycyclobutanones and aryl thiols. This acid-catalyzed mediated procedure allows access to the multigram and easily scalable synthesis of cyclopropyl adducts under mild conditions, using reusable Amberlyst-35 as a catalyst. The resins, suitably ground and used for filling steel columns, have been characterized via TGA, ATR, SEM and BET analyses to describe the physical-chemical properties of the packed bed and the continuous-flow system in detail. To highlight the synthetic versatility of the arylthiocyclopropyl carbonyl compounds, a series of selective oxidation reactions have been performed to access sulfoxide and sulfone carbaldehyde cyclopropanes, oxiranes and carboxylic acid derivatives.

Heterogeneous photocatalysts have garnered extensive attention as a sustainable way for environmental remediation and energy storage process. Water splitting, solar energy conversion, and pollutant degradation are examples of nowadays applications where semiconductor-based photocatalysts represent a potentially disruptive technology. The exploitation of solar radiation for photocatalysis could generate a strong impact by decreasing the energy demand and simultaneously mitigating the impact of anthropogenic pollutants. However, most of the actual photocatalysts work only on energy radiation in the Near-UV region (<400 nm), and the studies and development of new photocatalysts with high efficiency in the visible range of the spectrum are required. In this regard, hybrid organic/inorganic photocatalysts have emerged as highly potential materials to drastically improve visible photocatalytic efficiency. In this review, we will analyze the state-of-art and the developments of hybrid photocatalysts for energy storage and energy conversion process as well as their application in pollutant degradation and water treatments.

Cadmium yellow degradation afflicts numerous paintings realized between the XIXth and XXth centuries. The degradation process and its kinetics is not completely understood. It consists of chalking, lightening, flaking, spalling, and, in its most deteriorated cases, the formation of a crust over the original yellow paint. In order to improve the comprehension of the process, mock-up samples of CdS in yellow and orange tonalities were studied by means of structural analysis and optical characterization, with the principal techniques used in the field of cultural heritage. Mock ups were artificially degraded with heat treatment and UV exposure. Relevant colorimetric variation appears in CIE Lab coordinates from reflectance spectra. XRD, SEM-EDS, and Raman spectroscopy revealed the formation of cadmium sulfate, whilst time-resolved photoluminescence and pump-probe transient absorption spectroscopy suggest the formation of a defective phase, compatible with Cd vacancies and the formation of both CdO and CdSO 4 superficial clusters.

The introduction of N doping atoms in the carbon network of Carbon Dots is known to increase their quantum yield and broaden the emission spectrum, depending on the kind of N bonding introduced. N doping is usually achieved by exploiting amine molecules in the synthesis. In this work, we studied the possibility of introducing a N-N bonding in the carbon network by means of hydrothermal synthesis of citric acid and hydrazine molecules, including hydrated hydrazine, di-methylhydrazine and phenylhydrazine. The experimental optical features show the typical fingerprints of Carbon Dots formation, such as nanometric size, excitation dependent emission, non-single exponential decay of photoluminescence and G and D vibrational bands in the Raman spectra. To explain the reported data, we performed a detailed computational investigation of the possible products of the synthesis, comparing the simulated absorbance spectra with the experimental optical excitation pattern. The computed Raman spectra corroborate the hypothesis of the formation of pyridinone derivatives, among which the formation of small polymeric chains allowed the broad excitation spectra to be experimentally observed.

The photoreduction of 4-nitrophenol to 4-aminophenol by means of protonated and exfoliated phenyl-doped carbon nitride is reported. Although carbon nitride-based materials have been recognized as efficient photocatalysts, the photoreduction of 4-nitrophenol to 4-aminophenol is not allowed because of the high recombination rate of the photogenerated electron-hole pairs. In this paper, we show the morphology effects on the photoactivity in phenyl-doped carbon nitride. Structural (TEM, XRD, Raman) and optical characterization (absorption, photoluminescence) of the protonated and exfoliated phenyl-doped carbon nitride (hereafter pePhCN) is reported. The increased photocatalytic efficiency, with respect to the bulk material, is underlined by the calculation of the kinetic constant of the photoreduction process (2.78 × 10 -1 min -1 and 3.54 × 10 -3 min -1 ) for pePhCN and bulk PhCN, respectively. Finally, the detailed mechanism of the photoreduction process of 4-nitrophenol to 4-aminophenol by modified phenyl carbon nitride is proposed.

Beta hemoglobinopathies are widely spread monogenic lethal diseases. Delta-globin gene activation has been proposed as a possible approach for curing these pathologies. The therapeutic potential of delta-globin, the non-alpha component of Hemoglobin A 2 (α2δ2; HbA2), has been demonstrated in a mouse model of beta thalassemia, while its anti-sickling effect, comparable to that of gamma globin, was established some time ago. Here we show that the delta-globin mRNA level is considerably increased in a Deoxyribonuclease II-alpha knockout mouse model in which type 1 interferon (interferon beta, IFNb) is activated. IFNb activation in the fetal liver improves the delta-globin mRNA level, while the beta-globin mRNA level is significantly reduced. In addition, we show that HbA2 is significantly increased in patients with multiple sclerosis under type 1 interferon treatment. Our results represent a proof of principle that delta-globin expression can be enhanced through the use of molecules. This observation is potentially interesting in view of a pharmacological approach able to increase the HbA2 level., (Copyright © 2020 Manchinu, Simbula, Caria, Musu, Perseu, Porcu, Steri, Poddie, Frau, Cocco, Manunza, Barella and Ristaldi.)

Citrazinic acid (CZA) is a weakly fluorescent molecular compound whose optical properties are dependent on aggregation states and chemical environment. This molecule and its derivatives have been recently identified as the source of the intense blue emission of carbon dots obtained from citric acid with a nitrogen source, such as ammonia or urea. Citrazinic acid has a strong tendency to aggregate and form tautomers whose optical properties are largely unexplored. At extreme acidic and basic pH values, we have observed an "anomalous" optical response of citrazinic acid, attributed to the formation of aggregates from the tautomers. We have characterized the molecule, both at pH = 1 and 14, using UV-vis, NMR, steady-state, and time-resolved fluorescence spectroscopy. At extremely low pH values, the protonation causes luminescence quenching and the appearance of new emissions. On the contrary, high pH values are responsible for deprotonation and splitting of the excitation spectra., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

In medical terminology, it has become more and more common the use of the expression "Quality of Life" (QoL) to define a series of aspects that go beyond the traditional, clinical and "objective" evaluation of the medical intervention. The attention to QoL comes from the need to find tools that are able to reveal important aspects of the life of the patient that cannot be measured by a laboratory exam and/or a radiological procedure. The QoL is measured through multidimensional questionnaires on, at the very least, the domains of physical, psychological and social health. The improvement of the health care standards and the technological progress in medical matters have brought about an increase in the average age of the population, and as a consequence, an increase of the chronic and degenerative disease, which can negatively influence the patient's quality of life. Amongst these pathologies, heart failure (HF) has a high prevalence in patients who are at least 70 years old, and it's the cause of frequent and repeated hospitalizations. The estimate of the QoL becomes then a very important piece of the puzzle to figure out, as important as the clinical parameters, to allow the patient to become an integral part of the physician's decisions and to reach more quickly and with better results the therapeutic objectives.

A key regulatory gene in definitive erythropoiesis is the transcription factor Krüppel-like factor 1 (Klf1). Klf1 null mice die in utero by day 15.5 (E15.5) due to impaired definitive erythropoiesis and severe anemia. Definitive erythropoiesis takes place in erythroblastic islands in mammals. Erythroblastic islands are formed by a central macrophage (Central Macrophage of Erythroblastic Island, CMEI) surrounded by maturating erythroblasts. Interferon-β (IFN-β) is activated in the fetal liver's CMEI of Klf1 null mice. The inhibitory effect of IFN-β on erythropoiesis is known and, therefore, we speculated that IFN-β could have contributed to the impairment of definitive erythropoiesis in Klf1 knockout (KO) mice fetal liver. To validate this hypothesis, in this work we determined whether the inactivation of type I interferon receptor (Ifnar1) would ameliorate the phenotype of Klf1 KO mice by improving the lethal anemia. Our results show a prolonged survival of Klf1/Ifnar1 double KO embryos, with an improvement of the definitive erythropoiesis and erythroblast enucleation, together with a longer lifespan of CMEI in the fetal liver and also a restoration of the apoptotic program. Our data indicate that the cytotoxic effect of IFN-β activation in CMEI contribute to the impairment of definitive erythropoiesis associated with Klf1 deprivation.