Search

As research proceeds on treatment of the resorbed posterior maxilla, new techniques and innovations continue to be adopted to solve this clinical problem. While the previous edition of this book provided detailed information on the types of grafting materials and procedures available at the time, this completely revised version looks to the future with new strategies for treatment, some of which avoid grafting altogether. This book not only reviews the time-tested lateral window approach for sinus elevation and grafting but also describes a variety of techniques to approach the sinus transcrestally with or without grafting material. One section of the book is devoted entirely to the different types of implants and implant placement techniques available, many of which are designed specifically to avoid sinus elevation. In addition to clinical case studies and descriptions of how to perform specific surgical procedures, this book includes discussions on the science of bone formation and how continued research brings us closer every day to the ultimate goal of using tissue engineering to completely regenerate new teeth.

Implant treatment in an atrophied edentulous posterior maxilla constitutes a challenge for the therapeutic team. The authors of the present study acknowledge that modern micro-rough surface implants in lengths of about 8-10 mm or longer and of different brands are similarly successful. Consequently, the authors propose that the use of different sinus floor elevation techniques should be considered when < 8 mm of bone is available below the maxillary sinus. The type of sinus floor elevation technique selected is mainly based on residual vertical bone height, marginal bone width, local intrasinus anatomy and the number of teeth to be replaced, although other factors (such as surgical training and surgical experience) may have an impact. It is proposed that a transcrestal sinus floor elevation approach can be considered as a first-choice method for single tooth gaps in situations with sufficient width for implant placement and a residual bone height of 5-8 mm, while lateral sinus floor elevation, with or without grafting materials, is indicated when < 5 mm of bone is available and when several teeth are to be replaced. With regard to time of implant placement, a one-stage procedure is preferred provided that high primary stability can be ensured.

Background: Previous studies have shown predictable bone formation in the maxillary sinus after membrane elevation. However, how and where the bone is formed is not well understood. Purpose: The aim of the study was to histologically and immunohistochemically study the early bone formation events in primates after membrane elevation in the maxillary sinus. Materials and Methods: Nine adult male tufted capuchin primates (Cebus apella) were included in the study. Eight animals were subjected to bilateral maxillary sinus membrane elevation using a lateral replaceable bone window technique. One oxidized dental implant was placed into the maxillary sinus cavity on both sides. In four animals, one sinus was left without any additional treatment, whereas the contralateral sinus was filled with autologous bone grafts from the tibia. In two animals, the implants were inserted under the elevated sinus membrane on both sides. In two animals, the sinus membrane was totally removed. The animals were euthanized after 10 or 45 days. One nonoperated animal representing pristine tissue conditions served as control. The maxillary sinuses with implants were retrieved and further processed for light microscopic ground sections or decalcified sections for immune-histochemical analyses. Results: Bone formation started from the bottom of the sinus floor, sprouting into the granulation tissue along the implant surface under the elevated membrane irrespective of time and surgical technique. Bone formation was not seen in direct conjunction with the sinus membrane. A distinct expression of osteopontin was observed in the serous glands of the lamina propria close to the implant within all groups. Conclusion: Bone formation after sinus membrane elevation with or without additional bone grafts starts at the sinus floor and sprouts into the elevated space along the implant surface. The sinus membrane does not seem to present osteoinductive potential in sinus membrane elevation procedures in this, Originally published in manuscript form.

BACKGROUND: Clinical studies on immediate loading of implants in the posterior atrophic maxilla are rare. PURPOSE: The study aims to evaluate immediate loading of implants placed with sinus membrane elevation without additional grafting material for bone augmentation of the maxillary sinus floor. MATERIALS AND METHODS: The study group comprised of 10 patients in whom a total of 10 maxillary sinus floor augmentations were performed. A total of 21 dental implants (1 to 4) were inserted through the residual bone to protrude into the maxillary sinus under the elevated sinus membrane. The implant site was underprepared to improve primary stability. All the implants were inserted with a torque insertion no less than 20 Ncm. Implants were loaded immediately after surgery with a screw-retained temporary acrylic restoration. Intraoral X-rays were taken at implant insertion, after 6 months loading, and after 1st and 2nd year of loading. Resonance frequency analysis (RFA) was performed at the time of initial placement and after 6 months of functional loading. RESULTS: RFA after implant insertion gave an implant stability quotient (ISQ) level with a range from 62 to 72. All implants remained clinically stable during the follow-up period of 2 years. Radiography demonstrated on average 5.7 ± 3.4 mm of intrasinus new bone formation after 6 months of implant loading. RFA measurements showed ISQ mean values of 67 (range: 62-72) and 68 (range: 62-71) at placement and after 6 months of loading, respectively. CONCLUSION: Within the limits of this case series report, it is concluded that maxillary sinus membrane elevation with simultaneous placement and immediate loading of implants without the use of any additional grafting material shows predictable results after 2 years of functional loading. Moreover, evidence of intrasinus bone formation around the implants was found in all patients. Further studies are needed to study the influence of immediate loading on the mineralization of bon

Background: Extensive atrophy of the alveolar process may require a bone-grafting procedure prior to implant treatment. Autogenous bone grafts from the iliac crest, used as onlay block and particulate bone, have been used together with sinus-lift procedure in order to rehabilitate patients with extremely resorbed maxillae. However, there are to our knowledge no 5-year follow-up studies evaluating the extent of bone-level change in patients treated with respectively block and particulate autogenous bone grafts. Purpose: The purpose of this prospective clinical study was to conduct a 5-year follow-up analysis with focus on bone-level alteration in block versus particulate onlay bone grafts. Material and Methods: Fifteen out of originally 19 patients who were treated with iliac bone grafts and oral implants in the maxilla have been followed through the first 5 postoperative years. In a first study conducted on 19 patients, the role of platelet-rich plasma in conjunction with autogenous bone was evaluated. In this 5-year follow-up study, the marginal bone alterations have been documented at base line, 1 year and 5 years of loading to the nearest 0,1 mm at mesial and distal surfaces of the implants. Two implants were installed on each side of the midline in either block or particulate bone grafts giving test and control sides in each patient. Additionally, two implants on each side were installed in residual bone/grafted sinus floor. Result: Marginal bone alteration in the anterior maxilla appeared larger at the side augmented by block bone at baseline, and after 1 and 5 years of loading, but the change was not statistically significant. Moreover, there was a significantly higher degree of marginal alteration during the first year of loading, compared with the examinations after 5 years. Conclusion: The present follow-up study showed that there is no significant difference in the extension of resorption between block- and particulate autogenous bone grafts over a 5-year

Background: Platelet concentrate/platelet-rich plasma (PRP) has been studied extensively in various experimental models and there is some agreement among workers to its early effect in bone regeneration and healing. We have earlier showed in vitro that titanium in whole blood activates the thrombogenic response to a higher degree than PRP and that a fluoridated test surface augmented the effect compared with control. Purpose: We designed this study to evaluate the effect of PRP and whole blood on bone regeneration in a dog implant defect model and, in addition, the effect of a test surface modified in hydrofluoric acid. A correlation attempt between platelet count, release of growth factors, and bone regeneration was made. Materials and Methods: Six dogs were used and simultaneously with the experimental surgery and implant installation, autologous PRP was prepared. Defects were prepared (6 mm in diameter and 5 mm deep), and implants were installed (TiO2 gritblasted and hydrofluoric acid treated [test] or TiO2 gritblasted [control], 5 mm in diameter and 9 mm long) in defects filled with either PRP or whole blood. Randomization of sides between PRP and whole blood, and sites for test and control implants were made. Blood samples were collected from PRP and whole blood. The dogs were killed after 5 weeks of healing, and samples with implants and surrounding bone were collected and processed for analysis. Enzyme linked immunosorbent assays were used for detection of growth factors in PRP. Results: The mean increase of platelet count was 424% in PRP. A correlation for platelet counts and transforming growth factor β was found in each dog (r2 = 0.857). Approximately 50% of the region of interest (ROI) in the defects was filled with new bone after 5 weeks. No difference could be observed in ROI by using PRP or whole blood in the defects regarding new bone formation, bone in contact with implant, or distance to first bone contact. However, the fluoridated implants exhibite

Purpose: Evaluate correlations between volume change for iliac crest bone grafts in maxillary reconstruction (graft volume change [GVC]) and bone mineral density (BMD), bone volume fraction (BVF), hematologic bone metabolic factors (I), and identify indicators of implant failure (II). Material and Methods: Forty-six consecutive patients had their edentulous atrophic maxilla reconstructed with free autogenous bone grafts from anterior iliac crest. Endosteal implants were placed 6 months after graft healing. Computer tomography was performed after 3 weeks and 6 months after grafting. Bone biopsies were taken from the internal table of donor site for calculation (BVF), and blood samples were collected. Implant stability was measured at placement with resonance frequency analysis and expressed as implant stability quotient (ISQ). Implant failure was registered. Results: GVC in onlay bone graft was 37%. The BVF in iliac crest biopsies was 32%. Serum-IGFBP3 differed with 79% of the samples over normal range. Fifteen patients had one or more implant failures prior to loading (early failures). Forty-two patients were followed for a minimum of 3 years after implant loading and, in addition, 6/42 patients had one or more implants removed during the follow-up (late failures). GVC correlated to decreased BMD of lumbar vertebrae L2-L4 (Kruskal-Wallis test, p=.017). No correlation was found between GVC and hematologic factors (Pearson correlation test) or between GVC and BVF (Kruskal-Wallis test). No correlation was found between ISQ and GVC (Pearson correlation test, p=.865). The association between implant failures and the described factors were evaluated, and no significant correlations were found (unconditional logistic regression). Conclusion: Onlay bone grafts decrease 37% during initial healing period, which correlate to BMD of lumbar vertebrae L2-L4. No other evaluated parameters could explain GVC. The evaluated factors could not explain implant failure.

Background: Maxillary sinus floor augmentation is a procedure that is indicated in cases when the volume of the posterior maxillary bone is inadequate. The goal of this treatment is to obtain sufficient amount of bone tissue in order to gain osseointegration of endosseous implants. Purpose: The purpose of this study was to conduct a clinical and histological analysis of calcium sulfate (CaS) as bone graft substitute in sinus floor augmentation. Material and Methods: Ten patients with edentulous maxillas were included in this study. They had moderate to severe atrophy of the posterior maxilla. Surgiplaster (Classimplant(R), Rome, Italy) was used as graft material in the maxillary sinus and was covered by BioGide(R) (Geistlish Pharmaceutical, Wolhusen, Switzerland). After 4 months of graft healing, 40 dental implants were placed and a biopsy for histomorphometry was taken at these occasions. The specimens were viewed by light microscope, and the extent of bone regeneration and remaining graft material was evaluated. Radiographs were taken at the time of sinus augmentation and after 4 months of graft healing. Results: At the time of abutment surgery, one implant was considered as a failure and was consequently removed, giving a survival rate of 97.5% after 1 year of loading. Radiographs showed a mean of 26.5% shrinkage of the augmented area. A significant resorption of CaS was noted with a mean value of 8.8% of remaining graft material after 4 months of healing. The biopsies also revealed new bone formation with a mean value of 21.2% of the total biopsy area. Histology showed signs of an acellular substitution of CaS with bone-like tissue. Conclusion: The results of this study show that new bone regeneration occurs in the maxillary sinus after augmentation with CaS. This enabled successful placement, integration, and loading of dental implants in the posterior maxilla, as only 1 of 40 implants was lost during 1 year of follow-up.

Background: Clinical studies have shown a higher degree of implant failures in grafted bone compared with normal nongrafted maxillary bone. Additionally, a prolonged time for integration of titanium implants in grafted block bone has been shown by means of resonance frequency analysis (RFA). Purpose: The aim of this prospective study was to compare the stability of implants placed in particulate bone, onlay block bone, interpositional bone, and nongrafted maxillary bone during the early phase of osseointegration using RFA and implant failure. Material and Methods: Thirty-five patients with edentulism in the maxilla were included in the study. In all, 260 Astra Tech TiOblast™ implants (Astra Tech AB, Mölndal, Sweden) were installed. Twenty-five of these patients had severe maxillary atrophy and were treated with iliac bone grafts 5 to 6 months prior to implant placement, 19 with lateral onlay block grafts on one side (group A, 38 implants) and particulate bone for lateral augmentation on the other (group B, 38 implants). These 19 patients also got bilateral sinus floor augmentation with particulate bone (group C, 76 implants). Six patients had an unfavorable sagittal relation between the jaws and underwent a LeFort I operation with interpositional bone blocks grafted to the nasal and sinus floors (group D, 48 implants). The remaining 10 patients could be treated with implants without bone augmentation and served as control (group E, 60 implants). RFA was performed at implant placement and abutment connection 6 months later and an implant stability quotient (ISQ) value was given for each implant. Results: Four implants (1.5%) were found mobile at abutment connection and removed (two in group A and two in group D). RFA showed a slight increase in stability from installation to abutment connection but the differences were not statistically significant in any of the groups (Wilcoxon signed rank test for comparison of paired data). Implants installed in group D had a sign

BACKGROUND: Extensive alveolar bone resorption in the maxilla limits the possibility of successful placement and osseointegration of endosseous implants for future prosthetic rehabilitation. Autogenous bone from the iliac crest may be used as lateral onlays in the atrophic maxilla, both as block and particulate bone. To our knowledge, there is no three-dimensional 2-year follow-up study measuring the volumetric reduction of the augmented areas comparing particulate and block bone grafts. PURPOSE: The aim of this study was to conduct a radiographic 2-year follow-up study, using computed tomographic (CT) images in order to evaluate and compare the extent of bone graft resorption in the frontal maxillae augmented by particulate (test) and block bone (control). MATERIAL AND METHODS: Eleven patients treated with iliac bone grafts and oral implants in the maxilla were followed with CT examinations directly post grafting and after 2years. RESULT: The volumetric changes after 6months were extensive. Additionally, the changes in particulate bone tended to be larger after 2years compared to block bone, using this protocol. However, the difference was not statistically significant. CONCLUSION: The present follow-up study showed that there is radiographically complete integration and embedding of implants installed in grafted bone despite extensive initial graft resorption. There was no significant difference in the amount of volumetric reduction between particulate bone and block bone grafts.

Background: The bone tissue responses to Cyanoacrylate have been described in the literature, but none used N-butyl-2-cyanoacrilate (NB-Cn) for bone graft fixation. Purpose: The aims of the study were: (a) to analyze the bone grafts volume maintenance fixed either with NB-Cn or titanium screw; (b) to assess the incorporation of onlay grafts on perforated recipient bed; and (c) the differences of expression level of tartrate-resistant acid phosphatase (TRAP) protein involved in bone resorption. Materials and Methods: Eighteen New Zealand White rabbits were submitted to calvaria onlay grafting on both sides of the mandible. On one side, the graft was fixed with NB-Cn, while on the other hand the bone graft was secured with an osteosynthesis screw. The computed tomography (CT) was performed just after surgery and at animals sacrifice, after 1 (n = 9) and 6 weeks (n = 9), in order to estimate the bone grafts volume along the experiments. Histological sections of the grafted areas were prepared to evaluate the healing of bone grafts and to assess the expression of TRAP protein. Results: The CT scan showed better volume maintenance of bone grafts fixed with NB-Cn (p ≤ 0.05) compared with those fixed with screws, in both experimental times (analysis of variance). The immunohistochemical evaluation showed that the TRAP expression in a 6-week period was significantly higher compared with the 1-week period, without showing significant difference between the groups (Wilcoxon and Mann-Whitney). Histological analysis revealed that the NB-Cn caused periosteum damage, but provided bone graft stabilization and incorporation similar to the control group. Conclusion: The perforation provided by screw insertion into the graft during fixation may have triggered early revascularization and remodeling to render increased volume loss compared with the experimental group. These results indicate that the NB-Cn possesses equivalent properties to titanium screw to be used as bone fixation mat, Article first published online: 22 DEC 2010

Background: Previous studies have pointed out that the mere elevation of the maxillary sinus membrane promotes bone formation without the use of augmentation materials. Purpose: This experimental study aimed at evaluating if the two-stage procedure for sinus floor augmentation could benefit from the use of a space-making device in order to increase the bone volume to enable later implant installation with good primary stability. Materials and Methods: Six male tufted capuchin primates (Cebus apella) were subjected to extraction of the three premolars and the first molar on both sides of the maxilla to create an edentulous area. The sinuses were opened using the lateral bone-wall window technique, and the membrane was elevated. One resorbable space-making device was inserted in each maxillary sinus, and the bone window was returned in place. The animals were euthanatized after 6 months, and biopsy blocks containing the whole maxillary sinus and surrounding soft tissues were prepared for ground sections. Results: The histological examination of the specimens showed bone formation in contact with both the schneiderian membrane and the device in most cases even when the device was displaced. The process of bone formation indicates that this technique is potentially useful for two-stage sinus floor augmentation. The lack of stabilization of the device within the sinus demands further improvement of space-makers for predictable bone augmentation. Conclusions: It is concluded that (1) the device used in this study did not trigger any important inflammatory reaction; (2) when the sinus membrane was elevated, bone formation was a constant finding; and (3) an ideal space-making device should be stable and elevate the membrane to ensure a maintained connection between the membrane and the secluded space., Article first published online: 3 Aug 2009.

Objectives: To investigate the long-term clinical and radiographic results of the maxillary sinus membrane elevation technique where implants were inserted in a void space created by the elevation of the sinus membrane without adding any graft material. Materials and methods: A total of 84 patients were subjected to 96 membrane elevation procedures and simultaneous placement of 239 implants. Changes of intra-sinus and marginal bone height in relation to the implants were measured in intraoral radiographs taken at insertion, after 6 months of healing, after 6 months of loading and then annually. Computerized tomography was performed pre-surgically and 6 months post-surgically. Resonance Frequency Analyses measurements were performed at the time of implants placement, at abutment connection and after 6 months of loading. The implant follow-up period ranged from a minimum of one to a maximum of 6 years after implants loading. Results: All implants were stable after 6 months of healing. A total of three implants were lost during the follow-up period giving a survival rate of 98.7%. Radiography demonstrated on average 5.3±2.1 mm of intra-sinus new bone formation after 6 months of healing. RFA measurements showed adequate primary stability (implant stability quotient 67.4±6.1) and small changes over time. Conclusion: Maxillary sinus membrane elevation and simultaneous placement of implants without the use of bone grafts or bone substitutes result in predictable bone formation with a high implant survival rate of 98.7% during a follow-up period of up to 6 years. The intra-sinus bone formation remained stable in the long-term follow-up. It is suggested that the secluded compartment allowed for bone formation according to the principle of guided tissue regeneration. The high implant survival rate of 98.7% indicated that the implants sufficiently supported the fixed bridges throughout the study period. This technique reduces the risks for morbidity related to harvesting of bo

Objectives: To compare resorption of a synthetic biphasic calcium phosphate (BCP) bone-graft substitute with deproteinized bovine bone (DBB) used for human maxillary sinus augmentation. Materials and methods: Eleven patients underwent bilateral maxillary sinus floor augmentation with DBB in one side and a BCP (40%beta-tricalcium phosphate (beta-TCP) and 60% hydroxyapatite) in the contralateral side. Simultaneously, with the augmentation on each side a microimplant was placed vertically from the top of the alveolar crest penetrating the residual bone and the grafting material. Eight months after initial surgery the microimplants were retrieved with a surrounding bone core. The composition of residual graft material and surrounding bone was analysed by scanning electron microscopy and energy dispersive X-ray spectroscopy. Results: Residual graft material of both types was present as 10-500 mum particles in direct contact with, or completely surrounded by, newly formed bone; smaller particles were also present in non-mineralized tissue. In the case of BCP the bone-graft substitute interface showed evidence of superficial disintegration of particles into individual grains. Median Ca/P ratios (at.%), determined from >200 discreet sites within residual graft particles and adjacent bone, were: DBB: 1.61 (confidence interval [CI] 1.59-1.64); BCP: 1.5 (CI 1.45-1.52); DBB-augmented bone: 1.62 (CI 1.59-1.66); BCP-augmented bone: 1.52 (CI 1.47-1.55); P=0.028 for DBB vs. BCP and DBB- vs. BCP-augmented bone. The reduction in Ca/P ratio for BCP over the healing period is consistent with the dissolution of beta-TCP and reprecipitation on the surface of calcium-deficient hydroxyapatite. Conclusion: The beta-TCP component of BCP may be gradually substituted by calcium-deficient hydroxyapatite over the healing period. This process and superficial degranulation of BCP particles may influence the progress of resorption and healing. To cite this article: Lindgren C, Hallman M, Sennerb

Purpose: This randomized, controlled study was designed to compare bone formation around microimplants with a sandblasted, acid-etched surface placed at the time of maxillary sinus floor augmentation with a synthetic biphasic calcium phosphate (BCP) or deproteinized bovine bone (DBB). Materials and Methods: Nine completely edentulous patients and two partially edentulous patients (six women, five men) with a mean age of 67 years (range, 50 to 79 years) requiring bilateral sinus augmentation were included in the study. The patients were randomized for augmentation with BCP (test) in one side and DBB (control) in the contralateral side. At the time of augmentation, one microimplant on each side was placed vertically from the top of the alveolar crest, penetrating the residual bone and the grafting material. After 8 months of graft healing, at the time of ordinary implant placement, all 22 microimplants were retrieved with a surrounding bone core for histologic analyses. Results: The bone-to-implant contact in the BCP group was 64.6% +/- 9.0%, versus 55.0% +/- 16.0% for the DBB group. The difference was not significant. The corresponding values for the area of newly formed bone in the biopsies were 41.1% +/- 9.8% and 41.6% +/- 14.0% for BCP and DBB, respectively. There were significantly more DBB particles in contact with newly formed bone than BCP particles (87.9 +/- 18.2% versus 53.9 +/- 26.1%; Wilcoxon rank sum test; P = .007). Conclusion: In this randomized, controlled clinical trial, new bone formation and bone-to-implant contact around microimplants with a sandblasted, acid-etched surface was found to be equivalent between sinuses augmented with BCP or DBB. Significantly more DBB particles than BCP particles were in contact with newly formed bone, but the clinical relevance of this has yet to be established.

BACKGROUND: Previous studies have shown that membrane elevation results in predictable bone formation in the maxillary sinus provided that implants can be placed as tent poles. In situations with an extremely thin residual crest which impairs implant placement, it is possible that a space-making device can be used under the sinus membrane to promote bone formation prior to placement of implants. PURPOSE: The present study was conducted to test the hypothesis that the use of a space-making device for elevation of the sinus membrane will result in predictable bone formation at the maxillary sinus floor to allow placement of dental implants. MATERIALS AND METHODS: Eight tufted capuchin primates underwent bilateral sinus membrane elevation surgery, and a bioresorbable space-making device, about 6 mm wide and 6 mm in height, was placed below the elevated membrane on the sinus floor. An oxidized implant (Nobel Biocare AB, Gothenburg, Sweden) was installed in the residual bone protruding into the created space at one side while the other side was left without an implant. Four animals were sacrificed after 6 months of healing. The remaining four animals received a second implant in the side with a space-making device only and followed for another 3 months before sacrifice. Implant stability was assessed through resonance frequency analysis (RFA) using the Osstell (Osstell AB, Gothenburg, Sweden) at installation, 6 months and 9 months after the first surgery. The bone-implant contact (BIC) and bone area inside the threads (BA) were histometrically evaluated in ground sections. RESULTS: Histologically there were only minor or no signs of bone formation in the sites with a space-making device only. Sites with simultaneous implant placement showed bone formation along the implant surface. Sites with delayed implant placement showed minor or no bone formation and/or formation of a dense fibrous tissue along the apical part of the implant surface. In the latter group the apical p

OBJECTIVES: The overall aim was to compare the clinical outcomes of early and delayed implant loading in the totally edentulous maxilla during 5 years of function. MATERIALS AND METHODS: Twenty-four patients with edentulous maxillae were randomized in two groups and subjected to early (test, n=16) or delayed (control, n=8) loading. A total of 142 implants were placed and 139 implants (Straumann AG) were loaded with full-arch bridges and followed for 5 years. RESULTS: All patients received and maintained a fixed bridge throughout the study period. Five (5.3%) test implants in three patients and two (4.3%) control implants in two patients were lost during the 5 years (NS). There were no differences in implant stability as measured with resonance frequency analysis at 5 years. More bone loss occurred at test than at control implants, -0.8 mm (SD 1.2) vs. -0.3 mm (SD 1.1), respectively. However, test implants showed a more coronal marginal bone level than control implants after 5 years, 2.9 mm (SD 1.1) vs. 3.7 mm (SD 1.2) from the implant shoulder, respectively. No control implants and four (4.4%) test implants in three (18.8%) patients showed >3 mm bone loss after 5 years. Two of the latter implants in one patient also showed increased probing depths, bleeding at probing and plaque accumulation. Tooth fracture was the most common prosthetic complication. The use of lingual gold onlay effectively reduced the number of resin-related complications as opposed to a resilient mouth guard. CONCLUSIONS: The present randomized controlled trial showed no important differences between early and delayed loading of implants in the edentulous maxilla after 5 years of function. A favourable long-term marginal bone response to the sandblasted large-grit acid-etched (SLA) surface was observed. Technical complications were mainly resin-related which could be avoided by the use of a lingual gold onlay. It is concluded that early loading of SLA-surface implants for support of full-arch

Background: In cases when the alveolar crest is too narrow to host an implant, lateral augmentation is required. The use of autogenous bone blocks harvested from the iliac crest is often demanded. One disadvantage is the associated patient morbidity. Purpose: The purpose of this study was to clinically and histologically evaluate the use of morselized impacted bone allograft, a novel technique for reconstruction of the narrow alveolar crest. Materials and methods: Two patients with completely edentulous maxillae and one partially edentulous, with a mean age of 77 years (range 76-79 years) were included in the study. The alveolar crest width was < 3 mm without possibility to place any implant. Bone grafts were taken from a bone bank in Gavle Hospital. Bone from the neck of femur heads was milled to produce bone chips. The milled bone was partially defatted by rinsing in 37 degrees C saline solution. After compression of the graft pieces with a size of 15 mm (height), 30 mm (length), and 6 mm (width), they were then fit to adapt to the buccal surface of the atrophied alveolar crest. One piece was placed to the right and one to the left side of the midline. On both sides fibrin glue was used (Tisseel (R), Baxter AG, Vienna, Austria) to stabilize the graft. After 6 months of graft healing, dental implants were placed, simultaneously biopsies were harvested and in one patient two oxidized microimplants were placed. At the time of abutment connection, microimplants were retrieved with surrounding bone for histology. Fixed screw-retained bridges were fabricated in mean of 7 months after implant surgery. Radiographs were taken before and after implant surgery and after 1 year of loading. Results: Sixteen implants with an oxidized surface were placed (TiUnite (R), Nobel Biocare AB, Goteborg, Sweden). After 1 year of functional loading, all implants were clinically stable. The marginal bone loss was 1.4 mm (SD 0.3) after 1 year of loading. The histological examination show

PURPOSE: Restoration of lost dentition in the severely artrophic posterior maxilla has for the last 2 decades been successfully treated with various sinus augmentation techniques and installation of dental implants. The use of graft material is anticipated to be necessary; however, recent studies have demonstrated that the mere lifting of the sinus mucosal lining and simultaneous placement of implants result in bone formation. This study was conducted in order to evaluate simultaneous sinus mucosal lining elevation and installation of dental implants without any graft material. PATIENTS AND METHODS: Twenty patients were consecutively included from November 2001 to June 2004. Forty-four Astra ST dental implants (Astra Tech AB, Mölndal, Sweden) with a diameter of 4.5 mm or 5 mm were installed in 27 sinuses. A sinus lift was performed where a cortical window was removed from the maxillary anterior sinus wall. The sinus mucosal lining was elevated and implants installed in the residual subantral bone. The cortical window was thereafter replaced and the incision closed. The remaining bone height was recorded during surgery as well as perforations of the sinus mucosal lining. After 6 months of healing, abutments were connected (the series included 5 1-stage procedures). Clinical and radiological follow-up after loading was performed up to 4 years after implant installation. RESULTS: Patients tolerated the procedure well as few complications were observed. Firm primary stability was achieved for all implants at installation with bone levels in residual bone of 2 to 9 mm. Perforations of the maxillary sinus mucosal lining occurred in 11 of the 27 operated sinuses (41%). One implant was lost during a mean follow-up of 27.5 months (range, 14 to 45 months) giving an implant survival rate of 97.7%. The average gain of bone at the sinus floor was 6.51 mm (SD = 2.49, 44 implants) including all measured implants after a minimum of 1 year follow-up. Marked bone formation was observ

PURPOSE: The purpose of this study was to perform a longitudinal follow-up study of implant stability in grafted maxillae with the aid of clinical, radiological, and resonance frequency analysis (RFA) parameters. MATERIALS AND METHODS: The atrophic edentulous maxillae in 29 patients were reconstructed with free iliac crest grafts using onlay/inlay or interpositional grafting techniques. The endpoint of the resorption pattern in the maxilla determined the grafting technique used. Endosteal implants were placed after 6 months of bone-graft healing. Implant stability was measured four times using RFA: when the implants were placed, after 6 to 8 months of healing, after 6 months and 3 years of bridge loading. Individual checkups were performed at the two later RFA registrations after removal of the supraconstructions (Procera Implant Bridge, Nobel Biocare AB, Goteborg, Sweden). Radiological follow up of marginal bone level was performed annually. RESULTS: Twenty-five patients remained for the follow-up period. A total of 192 implants were placed and with a survival rate of 90% at the 3-year follow up. Women and an implant position with a class 6 resorption prior to reconstruction were factors with significant increased risk for implant failure (multivariate logistic regression). Twelve of the 20 failed implants were lost before loading (early failures). The change in the marginal bone level was 0.3 +/- 0.3 mm between baseline (bridge delivery) and the 3-year follow up. The implant stability quotient (ISQ) value for all implants differed significantly between abutment connection (60.2 +/- 7.3) and after 6 months of bridge loading (62.5 +/- 5.5) (Wilcoxon signed ranks test for paired data, p=.05) but were nonsignificant between 6 months of bridge loading and 3 years of bridge loading (61.8 +/- 5.5). There was a significant difference between successful and failed implants when the ISQ values were compared for individual implants at placement (Mann-Whitney U test, p=.004).

PURPOSE: To analyze the bone graft-implant interface of titanium microimplants (MIs) placed at the time of bone grafting or after a healing period of 6 months and retrieved after another 6 to 14 months of healing. Integration of MIs placed in interpositional bone grafts (IBGs) in conjunction with a Le Fort I osteotomy was compared with the integration of those placed in onlay/inlay bone grafts (OBGs). MATERIALS AND METHODS: The severely atrophied edentulous maxillae of 23 patients (14 women, 9 men) were restored with autogenous bone grafts (either IBG [n=8] or OBG [n=15]) and titanium implants. Six-month periods were allowed between grafting, implant placement, and abutment connection. The bone-implant interface was studied histologically with the use of unloaded titanium MIs. RESULTS: Sixty-eight MIs were either (1) placed simultaneously with grafting and retrieved after 6, 12, or 14 months or (2) placed after 6 months of healing and retrieved after another 6 to 8 months. Histomorphometry indicated equal degrees of osseointegration for the 2 intraoral reconstruction techniques when looking at bone-implant contact, bone area in threads, and newly formed bone (NFB) (Student t test for unpaired observations). There was a significant difference between simultaneous and delayed implant placement with respect to BIC and NFB (Student t test for paired observations). Three additional MIs placed in the nongrafted residual alveolar ridge and retrieved after 6 months showed significantly more bone in threads and NFB (Student t test for paired observations; P = .003 and P = .009, respectively) compared to MIs placed at graft placement (6 months' healing). DISCUSSION: Timing of implant placement appeared more important than healing time or surgical technique. The delayed approach resulted in better implant integration, probably because of the initial revascularization of the graft. CONCLUSIONS: Implant integration was similar in the IBG and OBG groups. Placement of MIs after an

The aim of this prospective study was to compare implants placed in grafted and normal non-grafted maxilla by means of resonance frequency analysis (RFA), clinical stability and implant failure. Twenty-nine patients with severe atrophy of the edentulous maxilla were treated with autogenous bone grafts as onlay (24 patients) or as interpositional grafts in conjunction with a Le Fort I osteotomy (five patients) 6 months prior to placement of 222 implants. Ten non-grafted patients treated with 75 Brånemark implants in the edentulous maxillae served as a control group. RFA was performed at implant placement, abutment connection and after 6 months of bridge loading. Seventeen (8%) implants were lost in the grafted bone and one (1%) in normal bone. RFA revealed a similar pattern in both grafted and normal maxillae, i.e. increasing resonance frequency (RF) with time (Wilcoxon Signed Rank test for paired data). Twenty implants that were rotation mobile (low primary stability) at the time of insertion showed a significantly lower value at implant placement according to RFA (Mann-Whitney U-test, P = 0.020). The RF for the failed implants revealed a tendency towards lower values (Mann-Whitney U-test, P = 0.072), compared to the successful implants. It is concluded that implants placed in grafted bone when using a two-stage technique achieve a stability similar to that of implants placed in normal non-grafted bone.

Background: Studies indicate that implants placed at the time of extraction have high success rates. Implants must be stable at the time of insertion. Presently there are no data indicating the degree of implant stability when implants are placed at the time of extraction. This study evaluated changes in stability of implants from implant placement to abutment connection utilizing resonance frequency analysis (RFA). The unit of measurement was the international stability quotient (ISQ). Methods: Prior to treatment, patients were given medical history and dental evaluations. Periapical and panogram radiographs were taken. Fifty-two patients requiring extraction of one or two teeth and implant placement immediately after extraction were enrolled in this study. Under conscious sedation and local anesthesia or local anesthesia alone, teeth were atraumatically removed and the extraction sockets were debrided. A total of 73 dental implants (57 in the maxilla, 16 in the mandible) were placed. Using a one-stage approach, all implants were placed within the patient's alveolar envelope and were never placed directly into extraction sockets. All implants were placed into contained extraction sites. Bone augmentation procedures were not performed. After implant insertion, the RFA electronic transducer was attached to the head of the implant with the retaining screw. The device was attached to a computer designed to register RFA scores in ISQ units. RFA measurements were taken at implant placement and abutment connection. Bone qualities, quantity, implant length and width as well as site of placement were recorded. Results: The average interval between implant insertion and abutment connection was 5.6 months (SD 2.05). Two implants were lost between implant insertion and 1 year. At 2 to 3 years, the cumulative survival was 97.2%. Resonance frequency measurements at implant placement showed a mean primary stability of 62.0 (SE 1.1; range 43 to 83 ISQ) and a mean secondary stabili

PURPOSE: The purposes of this study were 1) to evaluate the survival rate of implants placed in maxillary sinuses augmented with bovine hydroxyapatite and autogenous bone 6 months before implant surgery and 2) to estimate dimensional changes of the bone graft with time using a new radiographic method. PATIENTS AND METHODS: Thirty maxillary sinuses in 20 consecutive patients with severe resorption (mean, 3.8 mm of remaining alveolar bone) were augmented with a mixture of 80% bovine hydroxyapatite and 20% autogenous bone mixed with fibrin glue to enable the placement of screw-shaped dental implants. After 6 months of primary healing, 108 implants were placed and followed with clinical and radiographic examinations during the first year of loading. Measurements of changes in height, width, and length of the grafted material were made on tomographic Scanora (Soredex Orion Corporation Ltd, Helsinki, Finland) and panoramic radiographs taken 3 and 12 months after grafting and after 1 year of bridge loading. RESULTS: Ten implants in 6 patients were lost during the study (9 before loading and 1 after 1 year of functional loading), for a survival rate of 90.7%. All patients received fixed restorations, and the bridge survival rate was 100% after 1 year of loading. Small (<10%) but statistically significant dimensional changes in the grafted material were seen during the study period. CONCLUSIONS: Acceptable short-term results can be obtained with implants placed after the use of bovine hydroxyapatite and autogenous bone for maxillary sinus floor augmentation. These grafts show good resistance to resorption.

PURPOSE: This study was designed to clinically and histologically evaluate the integration of titanium implants in different grafting materials used for maxillary sinus augmentation procedures. MATERIALS AND METHODS: A total of 21 patients and 36 maxillary sinuses were augmented with (1) autogenous particulated bone from the mandibular ramus, (2) bovine hydroxyapatite (BH) with membrane coverage, or (3) an 80/20 mixture of BH and autogenous bone. The grafts were allowed to heal for 6 to 9 months prior to placement of microimplants for histology and standard implants for prosthetic rehabilitation. After another 6 months of healing, when abutments were connected, the microimplants were retrieved for histologic and morphometric analyses. The outcome of the standard implants was clinically evaluated after 1 year of loading. RESULTS: The mean bone-implant contact was 34.6 +/- 9.5%, 54.3 +/- 33.1%, and 31.6 +/- 19.1% for autogenous bone, mixture of 20% autogenous bone/80% BH, and 100% BH, respectively. The corresponding values for the bone area parameter were 37.7 +/- 31.3%, 39.9 +/- 8%, and 41.7 +/- 26.6%. The BH area was found to be 12.3 +/- 8.5% and 11.8 +/- 3.6% for 20% autogenous bone/80% BH and 100% BH, respectively. There were no statistically significant differences for any parameter between any of the groups. After 1 year of loading, 6 of the 33 implants placed in autogenous bone grafts, 2 of the 35 implants placed in the BH/autogenous bone mixture, and 2 of 43 implants placed in BH were lost. There were no statistically significant differences between any of the groups. DISCUSSION: The histomorphometric analysis showed no differences between the 3 groups, indicating that autogenous bone graft can be substituted with bovine hydroxyapatite to 80% or 100% when used for maxillary sinus floor augmentation. The effect of adding autogenous bone remains unclear but may allow for a reduction of the healing time. CONCLUSION: The results from this clinical and histologic s

Biopsies were taken from 16 out of 20 consecutive referral patients 6 to 8 months after maxillary sinus floor augmentation with a mixture of bovine hydroxyapatite (BH), autogenous bone particles and fibrin glue. Four days prior to biopsy retrieval the patients were given a single dose of tetracycline to label bone forming sites. Fluorescence microscopy of 100 microm thick sections revealed active bone formation in conjunction with the BH particles in 14 of 15 specimens analysed. Light microscopy and morphometry of ground sections from 16 patients showed various amounts of mineralised bone tissue in all except one specimen. In the latter case, the BH particles were encapsulated by a dense fibrous connective tissue. Sections from the augmented areas were occupied by non-mineralized tissue (54.1+12.6%), lamellar bone (21.2+24.5%), BH particles (14.5+10.3%) and woven bone (10.2+13.4%). The non-mineralized tissue seen in bone forming areas consisted of a loose connective tissue, rich of vessels and cells, and in the periphery of a more dense fibrous connective tissue. Woven bone with large and scattered osteocyte lacunae was bridging between the BH particles and the lamellar trabecular bone. There were no signs of resorption of the BH particles. The lamellar bone appeared to have originated from the recipient site and was seldom in contact with the BH particles. It is concluded that the tested implant material has bone conducting properties. The bone associated with the BH particles after 6 to 8 months of healing was mainly woven.

BACKGROUND: In clinical situations with peri-implant bone resorption, re-integration of the exposed implant surface is sometimes preferable, which requires a clean surface. Previous investigations have shown that cleaning of contaminated titanium surfaces using chemical and abrasive methods is difficult. PURPOSE: The aim of this investigation was to evaluate the efficacy of different combinations of chemical and physical methods (citric acid, hydrogen peroxide, and carbon dioxide [CO2] laser irradiation) for removal of contaminants and subsequent reconstruction of the surface oxide of intraorally contaminated titanium foils. MATERIALS AND METHODS: Commercially pure titanium foils (99.6%, 5 x 5 mm in size) were contaminated by placement on dentures in volunteering patients, simulating a peri-implantitis situation. The contaminated foils and clean control foils were treated by seven and six combinations of citric acid, hydrogen peroxide, and CO2 laser irradiation, respectively. The effect of the cleaning procedures was evaluated by x-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). RESULTS: The initial elemental composition of the contaminated foils was 70% carbon (C), 20% oxygen (O), 10% nitrogen (N), and only traces of titanium (Ti) (< 1%). One treatment proved to be more effective than the others: irradiations by 5-second cycles of superpulsed CO2 laser at a power of 7 W, 10-millisecond pulse width, and with an 80-Hz frequency on a wet surface, followed by repeated application of supersaturated citric acid for 30 seconds, each time followed by rinsing with ultrapure water until all tissue remnants had been removed. Finally, hydrogen peroxide of 10-mM concentration was added to the implant surface and evaporated by CO2 laser at the same settings. This treatment protocol resulted in 10% Ti, 45% O, 41% C, and 2 to 3% N, a composition comparable to that of unused foils: 9% Ti, 40% O, 48% C, and traces of N and chlorine (CI). X-ray photoelect, SCOPUS: ar.j, FLWIN, info:eu-repo/semantics/published

The soft tissue response to clinically retrieved and decontaminated cover screws was evaluated in a rat model. The cover screws were cleaned by using citric acid, sterile water, hydrogen peroxide and CO2 laser alone or with a combination of these. In addition, decontaminated but not cleaned and unused cover screws were used as negative and positive controls, respectively. After cleaning the cover screws were implanted in the abdominal wall of the rat for 6 weeks. The thickness of the fibrous capsule and the number of macrophages within the capsule were measured by means of light microscopical morphometry. As compared to the negative control, CO2 laser on dry surface, CO2 laser+hydrogen peroxide and the positive control had statistically significant thinner fibrous capsules. As compared to the positive, only laser alone resulted in a similar tissue response. It is concluded that CO2 laser used alone or in combination with hydrogen peroxide may be used clinically for sufficient decontamination of titanium surfaces. © Munksgaard 2000., SCOPUS: ar.j, FLWIN, info:eu-repo/semantics/published

The aim of the present study was to histologically analyse the bone graft-titanium implant interface after six and twelve months of healing for a simultaneous approach and after six months for a delayed approach. For this purpose, screw-shaped c.p. titanium microimplants, 2 mm in diameter and 5 mm long, were placed and retrieved at different time intervals in ten consecutive patients with severely resorbed maxillae and treated with iliac cortico-cancellous bone grafts and titanium implants in a two-stage procedure. The histomorphometrical analyses of ground sections of the specimens showed a higher degree of bone-implant contact and more bone filling the implant threads in the delayed approach microimplants. This was probably due to the partly revascularized grafted bone in the delayed approach being able to respond to the surgical trauma, resulting in interfacial bone formation. It is concluded that the results from the present study favour the use of a delayed approach when using free autogenous bone grafts and titanium implants for reconstruction of the severely atrophied maxilla.

The purpose of the present in vitro investigation was to measure temperature changes at the implant surface when using pulsed CO2 laser in a simulated implant surface decontamination protocol. Six threaded titanium implants were placed in a fresh resected pig mandible. A 4×4 mm defect was created buccally to each implant in order to expose the implant head and approximately 5 threads. Temperature changes were monitored by two thermocouples placed near the dehiscence and at the apical part of the implant. Several setting combinations of the CO2 laser with regard to output power, pulse width, pulse repetition rate and irradiation time were tested on dry and wet (distilled water) surfaces. Only minor temperature increases were measured when lasing wet titanium surfaces, while the temperature at dry surfaces exceeded the proposed thresholds for bone damage at clinically relevant settings. It is concluded that the CO2 laser when used on a wet implant surface in a pulsed mode at 8 W/10 ms/20 hz during 5 s induces a temperature increase of less than 3°C. This would minimize the risk of temperature induced tissue damage as a result of lasing implant surfaces. © Munksgaard 1999., SCOPUS: ar.j, FLWIN, info:eu-repo/semantics/published

The purpose of the present study was to analyse clinically failed and retrieved implants prior to and after cleaning by means of scanning electron microscopy (SEM) and X-ray induced photoelectron spectroscopy (XPS) as compared to unused controls. Six different chemical and physical techniques for cleaning of contaminated titanium implants were evaluated: 1) rinsing in absolute ethanol for 10 min, 2) cleaning in ultrasonic baths containing trichloroethylene (TRI) and absolute ethanol, 10 min in each solution, 3) abrasive cleaning for 30 s, 4) cleaning in supersaturated citric acid for 30 s, 5) cleaning with continuous CO 2-laser in dry conditions at 5 W for 10 s, 6) cleaning with continuous CO 2-laser in wet conditions (saline) at 5 W for 10 s. SEM of failed implants showed the presence of contaminants of varying sizes and XPS showed almost no titanium but high carbon signals. XPS of unused titanium implants showed lower levels of titanium as previously reported, probably due to contamination of carbon which increased with time in room air. Cleaning of used implants in citric acid followed by rinsing with deionized water for 5 min followed by cleaning in ultrasonic baths with TRI and absolute ethanol gave the best results with regard to macroscopical appearance and surface composition. However, as compared to the unused implants the results from an element composition point of view were still unsatisfactory. It is concluded that further development and testing of techniques for cleaning of organically contaminated titanium is needed. © Munksgaard 1998., SCOPUS: ar.j, FLWIN, info:eu-repo/semantics/published