Search

This study is aimed at identifying potential molecular mechanisms and candidate biomarkers in the left atrial regions for the diagnosis and treatment of valvular atrial fibrillation (VAF). Multibioinformatics methods, including linear models for microarray analysis (LIMMA), an SVA algorithm, CIBERSORT immune infiltration, and DNA methylation analysis, were employed. In addition, the protein-protein interaction (PPI) network, Gene Ontology (GO), and molecular pathways of differentially expressed genes (DEGs) or differential methylation regions were constructed. In all, compared with the normal rhythm group, 243 different mRNAs (29 downregulated and 214 upregulated) and 26 different lncRNAs (3 downregulated and 23 upregulated) were detected in the left atrium (LA) of atrial fibrillation (AF) patients, and the neutrophil and CD8+ T cell were infiltrated. Additionally, 199 different methylation sites (107 downregulated and 92 upregulated) were also identified based on DNA methylation analysis. After integration, ELOVL2, CCR2, and WEE1 were detected for differentially methylated and differentially transcribed genes. Among them, WEE1 was also a core gene identified by the competing endogenous RNA (ceRNA) network that included WEE1-KRBOX1-AS1-hsa-miR-17-5p, in VAF left atrial tissue. We combined the DNA methylation and transcriptional expression differential analysis and found that WEE1 (cg13365543) may well be a candidate gene regulated by DNA methylation modification. Moreover, KRBOX1-AS1 and WEE1 can compete endogenously and may mediate myocardial tissue infiltration into CD8+ T cells and participate in the AF process. [ABSTRACT FROM AUTHOR]

Soft abrasive flow (SAF) finishing has advantages in precise processing for titaniferous alloy parts with large-area surfaces. However, the processing efficiency and surface quality of current SAF methods require to be improved. To address the issues, a novel gas–liquid-solid three-phase rotary abrasive flow polishing method (RGLSP) is proposed based on the microbubble cavitation effect. Referring to the energy conservation principles of bubbles group movement, an improved realizable k-ε turbulence model is set up. Based on the above model, a mechanical dynamic model of the machining apparatus is established to obtain the flow field distribution of different structural parameters. The simulated results show that the pitch-down angle determines the distribution of the rotary flow field, and an optimized processing apparatus is developed. The machining experiments show that the proposed RGLSP method can improve the machining efficiency by 60%, and the surface roughness can reach Ra 0.1 μm with lower surface defects. The RGLSP can provide an important reference direction for low-carbon emission processing. [ABSTRACT FROM AUTHOR]

Mud pulse generators have been widely used for the real-time transmission of valuable directional and formation data from downholes with depths of thousands of meters. There have been numerous studies on the design of mud pulse generators in which the pressure waves were typically nonsinusoidal. Sinusoidal waves provide improved long-distance data transmission and signal noise suppression compared with nonsinusoidal waves. Although sinusoidal pressure wave generators have been studied in the published literature, the influence of the risks of clogging on the design of the generator for producing sinusoidal pressure waves has rarely been considered. To generate sinusoidal pressure waves and to reduce the risks of clogging, a mathematical model for the design of a sinusoidal pressure wave generator is developed in this paper. The effects of the axial and radial clearances between the rotor and stator on the design of the generator are considered in the model. An optimum design method for the generator is provided by combining the developed model and a computational fluid dynamics analysis. Finally, an experimental platform was built and experiments at frequencies 2 Hz and 10 Hz were conducted to validate the design result. The simulation and experimental results show that the optimized pressure waves closely approximate sine waves. Therefore, the developed mathematical model and optimization approach can be used to design a sinusoidal pressure wave generator. [ABSTRACT FROM AUTHOR]

A novel combustion gas and steam mixture cycle (GSMC) power generation system was simulated and studied in this paper. The system integrates the technologies of NG/O 2 combustion, energy storage, peak-shaving and CO 2 capture with LNG/LO 2 cold energy utilization, which has remarkable features such as high efficiency, low first/operation/maintenance costs, zero CO 2 and NO x emission and massive off-peak power shifting. A calculation case is presented and the impacts of turbine inlet parameters, condensing pressure/condenser outlet temperature and feedwater temperature on the net electric efficiency excluding ASU and equivalent net electric efficiency as well as CO 2 capture features are analyzed. The steam content in vapor phase of the condenser outlet is considered which requires more cooling capacity for CO 2 capture. Under the conditions that the condenser outlet temperature/condensing pressure is 30 °C/30 kPa and feedwater temperature is 300 °C, with fully CO 2 capture, the net electric efficiency excluding ASU and equivalent net electric efficiency are 0.4386 and 0.4105 respectively with turbine inlet parameters of 600 °C/30 MPa, and they can reach 0.5327 and 0.5046 respectively with turbine inlet parameters of 1000 °C/40 MPa. [ABSTRACT FROM AUTHOR]

Transition metal oxides@carbon(C) nanocomposites with hierarchical three-dimensional (3D) core-shell nanoarchitectures, large surface area and high electrical conductivity as anode materials for lithium ion batteries (LIBs) are very desirable. Herein, we developed a simple and feasible route to fabricate novel hierarchical 3D ball-in-ball ZnO/ZnFe 2 O 4 @C nanospheres with well-defined hollow microstructures via one-step carbonization of Zn/Fe-metal organic frameworks for the first time. The as-prepared hierarchical 3D ball-in-ball ZnO/ZnFe 2 O 4 @C nanospheres were carefully characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, thermogravimetric analysis, N 2 adsorption/desorption isotherm, transmission electron microscopy and electrochemical techniques. The results showed ultrafine ZnO and ZnFe 2 O 4 nanocrystals were uniformly encapsulated by few carbon layers which was derived from in-situ carbonization of the organic ligands. Benefiting from their special hollow nanoarchitectures, ultrafine ZnO and ZnFe 2 O 4 nanocrystals encapsulated by a few carbon layers, large specific surface area and high electrical conductivity, the hierarchical 3D ball-in-ball ZnO/ZnFe 2 O 4 @C nanospheres presented high reversible capacities of 1283 and 1100 mA h g −1 after first 100 cycles and the following 100 cycles at current density of 100 and 200 mA g −1 , respectively. A high specific capacity of 155 mA h g −1 was obtained at relatively large current rates of 20 A g −1 . [ABSTRACT FROM AUTHOR]

Inferior specific capacity and sluggish redox kinetics are the most stubborn problems lithium-ion and lithium-sulfur batteries (LIBs and LSBs) are facing, respectively. Here we report a facile fabrication of self-supported hollow Co 3 O 4 @carbon nanotubes on carbon cloth (H-Co 3 O 4 @CNT/CC) through a mild pyrolysis-oxidation process. The additive- and binder-free H-Co 3 O 4 @CNT/CC shows excellent electrochemical performances as both LIBs and LSBs electrodes. As a robust integrated anode for LIBs, the areal capacities are 2.72 mAh cm−2 at the current density of 0.5 C over 1000 cycles. While as a durable cathode host for LSBs, favorable areal capacities of 2.37 mAh cm−2 are maintained with a low capacity decay of 0.11 % per cycle at the sulfur loading of 6 mg cm−2 and current density of 1 C after 400 cycles. Electrochemical technology, ex situ Raman spectroscopy and DFT calculations are performed to comprehensively analyze H-Co 3 O 4 @CNT/CC via thermodynamics and kinetics. It is demonstrated that the hierarchically hollow interior structure, strong adsorb ability of Co 3 O 4 toward polysulfides and three-dimensional (3D) inter-connected conductive carbon framework are responsible for the high areal capacity, fast redox kinetics and cycling durability. [Display omitted] • The integrated electrode possesses the merits of hollow nanostructured Co 3 O 4 and 3D inter-connected conductive network. • Electrochemical technology and DFT calculations are performed to comprehensively analyze H-Co 3 O 4 @CNT/CC. • H-Co 3 O 4 @CNT/CC delivers high areal capacities of 2.72 mAh cm-2 after 1000 cycles at 0.5 C as anode. [ABSTRACT FROM AUTHOR]

The sensitive detection of dipicolinic acid (DPA) as an excellent biomarker of Bacillus anthracis , especially through visual point-of-care testing, is significant for accurate and rapid diagnosis of anthrax to timely prevent anthrax disease or biological terrorist attack. Herein, an acoustofluidics-based colorimetric platform with the integrated ratiometric fluorescence probe (INT-probe) was fabricated, which improved the sensitivity of visual detection for DPA and overcame the poor reproducibility of the existing acoustofluidics-assisted colorimetric analysis. For the design of INT-probe, Eu3+-EDTA complex as sensing moiety was grafted onto the surface of blue organosilane-functionalized carbon dots (SiCDs)-doped SiO 2 nanoparticles (NPs). Upon exposure to DPA, Eu3+ was sensitized by DPA to emit red luminescence, while the SiCDs as reference inside the SiO 2 NPs still kept the blue fluorescence unchanged. Attributed to the acoustic radiation force-driven enrichment of the INT-probe, slight color changes caused by low concentration of DPA could be amplified and distinguished by naked-eyes/smartphone. With the increase of DPA concentration, obvious color variations of INT-probe/DPA aggregates from blue to pink could be observed, and the color information of the fluorescent aggregates was converted to red, green and blue values for quantitative analysis, whose lowest detectable concentration reached 100 nM that is about 2–3 orders of magnitude lower than the infectious dosage of Bacillus anthracis spores (60 μM). Importantly, benefiting from the great color signal enhancement by acoustofluidic sensing platform, the usage of Eu3+ reduced to as low as 0.273 μmol per gram of SiO 2 NPs, providing a meaningful way to utilize lanthanide resource efficiently. [ABSTRACT FROM AUTHOR]

[Display omitted] • The b-SiCDs covalently bind in SiO 2 NPs to exhibit strong internal standard robustness. • The triple-emission probe is constructed by two ratiometric fluorescent composite NPs. • The probe shows more profuse and wider color variations using two-step response strategy. • Sensitivity for colorimetric assay of Hb is further improved by acoustofluidic technology. • RGB values got by chromaticity analysis APP are used for accurate Hb quantification. Acoustofluidics-assisted colorimetric method, a promising point-of-care test (POCT) strategy, has been applied in convenient detection of target molecules using the sensing nanomaterials, but remains a formidable challenge to design fluorescent probe with profuse color evolution, realizing sensitive, simple and accurate determination of analyte. Here, a novel triple-emission fluorescent probe is constructed through a simple blend of two ratiometric fluorescent probes (blue-organosilane-polymerized carbon dots@SiO 2 nanoparticles@red-CdTe/CdS quantum dots (b@SiO 2 @r) and blue-organosilane-polymerized carbon dots@SiO 2 nanoparticles@green-CdTe/CdS quantum dots (b@SiO 2 @g)) at the optimized volume ratio of 11:8. As signal reporters of the triple-emission probe, outer modified "r" and "g" will be quenched in sequence by target via two-step response strategy while the inner "b" as internal standard remains constant. When acoustic field is applied, the effect of acoustofluidics-based nanoparticles concentration makes triple-emission probe aggregate completely, accompanying fluorescence color signal being enhanced, sensitivity of colorimetric assay being improved and multicolor-variation (from orange to dark-goldenrod to dark-olive-green to sea-green to dark-cyan to final steel-blue) with the increase of analyte amount. For POCT demonstration, hemoglobin (Hb) is used as a model target and the captured fluorescence photos of triple-emission probe aggregates are analyzed by a chromaticity analysis application on the smartphone to calculate the red, green and blue values, which are used for accurate Hb quantification with the limit of detection of 1.99 mg/L. Whole test is finished within ∼12 min. The acoustofluidics-manipulated triple-emission probe biosensing strategy has also been applied to the rapid and visual quantitative detection of Hb in human blood. [ABSTRACT FROM AUTHOR]

In this work, we demonstrated an accessible and facile method to prepare hierarchically porous carbon (HPC)/Co 3 O 4 nanocomposites (HPCC). Biomaterials-derived HPC was used as the appropriate carrier to load Co 3 O 4 nanoparticles due to its hierarchically porous structure and high surface area of 163 m 2 g −1 . The HPCC nanocomposites were used as an anode material for lithium-ion batteries (LIBs) and showed good electrochemical performance, delivering an initial discharge of 1566 and charge capacity of 1314 mA h g −1 with a initial coulombic efficiency of 83.9%. Additionally, it could still maintain a high reversible capacity of 1215 mA h g −1 after 100 cycles at a specific current of 100 mA g −1 , which is much better than that of HPC, and Co 3 O 4 and some Co 3 O 4 -based nanocomposites. The good electrochemical performance was mainly attributed to the good distribution of small Co 3 O 4 on HPC, the high surface area and hierarchical pores of HPC to effectively load a number of small Co 3 O 4 , alleviate the severe volume expansion during cycling and improve the electrical conductivity of nanocomposites, and the synergistic effects from the HPC and Co 3 O 4 . Therefore, the HPCC nanocomposites were expected to be an advanced anode material for LIBs. [ABSTRACT FROM AUTHOR]

Periodic pressure waves propagating in drilling fluids along the wellbore are widely used to transmit the downhole information through the drillstring. Although various evaluation models for the wellbore and periodic pipe flows have been studied in published literature, the influence of the frequency and multi-boundary conditions on these models for the non-Newtonian drilling fluid is rarely considered. The paper presents a one-dimensional equivalent model to simulate the propagation of the periodic pressure waves in drilling fluids along the wellbore based on the assumption that the system is isothermal and the internal diameter of drillstring is a constant value. Specially, the periodic pressure waves are divided into low-frequency part (such as pump-on pulse) and high-frequency part (such as pressure wave generated by mud pulse telemetry system). The interactions of these two parts with the turbulence and Bingham fluid are investigated based on the Navier–Stokes equation for a 2D axisymmetric transient flow subjected to the five boundary conditions including the pump, air chamber, mud pulse telemetry system, drill bit and the outlet. A finite difference method with second-order accuracy is used to solve the numerical model. Experiments in the shallow and deep wells are conducted to validate the model. The simulated results are in good agreement with the experiment measurement. Finally, the influence of the frequency on pressure wave attenuation is analyzed and the result is compared with those calculated from acoustic attenuation formula. Both results show consistent trend with increasing frequency. [ABSTRACT FROM AUTHOR]

The widely used fin-and-tube heat exchangers have a low air-side heat transfer capacity. Enhancing the air-side thermo-hydraulic performance is a key point of the relevant research. Vortex generators have been proven to be one of the most promising techniques to improve the air-side heat transfer capacity of the fin-and-tube heat exchangers. Herein, this paper proposed an original sinusoidal wavy winglet type vortex generator to achieve high heat transfer performance with moderate increased pressure drop penalty. A three-dimensional numerical simulation was conducted to explore the air-side thermo-hydraulic performance with Reynolds number ranging from 1027 to 2054. The longitudinal vortex is generated in the channel so as to enhance the intensify of convective heat transfer. Especially, the wave-shaped vortex generators can produce many local small-scale secondary flows. And it is confirmed that the frontal area of the vortex generator can be effectively extended by such wavy shape and a more intensified disturbance can be caused in the air-side. Furthermore, the effects of the attack angle (α), dimensionless height (H p) and especially arrange position of the vortex generator were investigated. Additionally, the ranges of the Nusselt number ratio, friction factor ratio and surafece goodness factor in this study are 1.09–1.52, 1.09–2.31, and 1.06–1.24, respectively. Moreover, it is also very crucial to evalute the grade of energy and to explore the irreversible loss druing the heat tranfer process in view of the second law of thermodynamics. And the thermal dissipation can be reduced by up to 5.85% compared with the plain fins from the perspective of exergy analysis. [ABSTRACT FROM AUTHOR]

In this work, we propose the using of a transient acoustic imaging technique to analyze blade-vortex interaction (BVI) noise, which is considered as one of the dominant noise sources from rotorcraft. A simplified but representative set-up with a two-bladed rotor in the presence of a moving flow is considered herein. First, we conducted a delayed detached-eddy simulation to reveal the associated flow physics and to identify the distinctive flow structures during the BVI process. The numerical analysis complements the physical understanding gained from the following acoustical imaging analysis, where a recently developed phase-averaged wavelet-based beamforming method in the time-frequency domain is adopted. Compared to transient flow structures, which have been visualized in the numerical study, the acoustic imaging results clearly demonstrate the transient analysis capability of the proposed approach. It is impossible to achieve such a transient analysis capability by simply using the classical beamforming method. In particular, the transient analysis shows that the dominant noise sources would move along the blade in the radial direction, by essentially following the corresponding BVI positions on the blade, which is also consistent with the numerical results. Overall, the proposed method can help achieve a deepened physical understanding of transient aerodynamic and aeroacoustic process and could find applications in low-noise rotorcraft designs. [ABSTRACT FROM AUTHOR]

In recent decades, the Timed Elastic Band (TEB) algorithm is widely used for the AGV local path panning because of its convenient and efficiency. However, it may make a local detour when encountering a curve turn and cause excessive energy consumption. To solve this problem, this paper proposed an improved TEB algorithm to make the AGV walk along the wall when turning, which shortens the planning time and saves energy. Experiments were implemented in the Rviz visualization tool platform of the robot operating system (ROS). Simulated experiment results reflect that an amount of 5% reduction in the planning time has been achieved and the velocity curve implies that the operation was relatively smooth. Practical experiment results demonstrate the effectiveness and feasibility of the proposed method that the robots can avoid obstacles smoothly in the unknown static and dynamic obstacle environment. [ABSTRACT FROM AUTHOR]

Abstract: A visualization study is conducted to investigate condensation flow in wide rectangular silicon microchannels with the hydraulic diameter of 90.6 μm and width/depth ratio of 9.668. Droplet-annular compound flow, injection flow, and vapor slug-bubbly flow are observed along the channel, which differ from that in other cross-sectional shape microchannels. In the droplet-annular compound flow region, the vertical walls (short side) of the channel are completely covered by the condensate, while droplet condensation still exists on the horizontal wall (long side) of the channel. The location of the injection flow will be postponed with the increasing inlet vapor Reynolds number. The injection frequency will increase with the increasing inlet vapor Reynolds number and condensate Weber number. More specifically, the frequency in the wide rectangular microchannels is lower than that in triangular microchannels having the same hydraulic diameter. It is confirmed that the cross-sectional shape of the microchannel plays a significant role on the instability of condensation flow. In addition, the correlation of Nusselt number is also presented. [Copyright &y& Elsevier]

Abstract: A steady one-dimensional model for annular condensation flow in triangular microchannels is developed. The curvature radius distribution of the condensate stream along the channel has been determined numerically. The results indicate that the curvature radius of the liquid phase would increase rapidly at the beginning, and then as the condensation process progresses along the length of the microchannels, the radius increase would proceed more slowly. At the end of the condensation flow, the radius increases rapidly again. A smaller contact angle and heat flux or a larger hydraulic diameter and steam pressure will all result in a longer condensation length. [Copyright &y& Elsevier]

In the contemporary era, energy demands are ever-growing and a significant number of people are concerned about environmental pollution caused by the burning of fossil fuels. Therefore, it is a striking problem for the researchers to pursue renewable energy and sustainable energy to deal with the environmental and energy crisis. In this work, a novel hybrid hollow porous ZnO/C nanocages with high specific surface areas of 256 m 2 g −1 and high carbon content in weight of about 50% used as anode materials for lithium ion batteries (LIBs) were synthesized by a one-step pyrolysis of hollow metal organic framework material MOF-5 as both precursor and self-sacrificing template under N 2 atmosphere. The hollow porous ZnO/C nanocages released an initial discharge capacity of 1928 mA h g −1 at the current density of 100 mA g −1 and remained a high reversible capacity of 750 mA h g −1 after 100 cycles. According to the results of electrochemical measurements, the hollow porous ZnO/C nanocages also showed a good rate capability of 351 mA h g −1 at a relative large current density of 2 A g −1 . The excellent electrochemical performance was mainly due to the special nanostructures of the fabricated materials. Hence, the as-resulted hollow porous ZnO/C nanocages are promising anode materials for LIBs. [ABSTRACT FROM AUTHOR]

In this study, monotonic and reversed-cyclic loading tests were conducted on six diagonally reinforced cold-formed steel (CFS) shear walls sheathed with a gypsum board (GYP) and a magnesium crystal board (MCB), respectively, to evaluate the effects of sheathing panels and different types of diagonal bracings on the shear capacity, lateral stiffness, ductility, and energy dissipation capacity of CFS shear walls. The results revealed that the stiffness of the skeleton, the sheathing material, the performance of the screw connections, and the construction of the splice of the wall panels have a distinct effect on the shear performance of the wall. The cooperative work effect of the rigid and strap bracings was excellent, and the ultimate strength and lateral stiffness of the wall were effectively improved by using an extra steel strap bracing. The shear performance of the wall sheathed with the MCB was higher than that of the wall sheathed with the GYP. When a flat steel strap was used to connect the panel splices, the torsion of the flat steel strap reduced the overall performance of the wall panels. This should be considered in practical engineering applications. • Six full-scale CFS shear walls were tested under monotonic and cyclic load. • The cooperative work effect of rigid and strap bracings was excellent. • The mechanical properties of the wall sheathed with MCB were better. • The diagonal braceing should be strengthened in the joint area. [ABSTRACT FROM AUTHOR]

Rational design of cost-effective and efficient bifunctional oxygen electrocatalysts for sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is urgently desired for rechargeable metal–air batteries and regenerative fuel cells. Here, the Fe3C nanoparticles encapsulated in N and F codoped and simultaneously etched graphene/CNTs architecture catalyst (Fe3C@N-F-GCNTs) was synthesized by a simple yet cost-effective strategy. The as-prepared Fe3C@N-F-GCNTs exhibited excellent ORR and OER performances, with the ORR half-wave potential positive than that of Pt/C by 14 mV, and the OER overpotential lowered to 432 mV at the current density of 10 mA·cm−2. In addition, the ΔE value (oxygen electrode activity parameter) increased to 0.827 V, which is comparable to the performance of the best nonprecious metal catalysts reported to date. When it was applied in a Zn–air battery as a cathode, it achieved a peak power density of 130 mW·cm−2, exhibiting the potential for large-scale applications. [ABSTRACT FROM AUTHOR]

High-accuracy temperature measurement plays a vital role in biomedical, oceanographic, and photovoltaic industries. Here, a highly sensitive temperature sensor is proposed and demonstrated based on cascaded polymer-infiltrated Mach–Zehnder interferometers (MZIs), operating near the dispersion turning point. The MZI was constructed by splicing a half-pitch graded index fiber (GIF) and two sections of single-mode fiber and creating an inner air cavity based on femtosecond laser micromachining. The UV-curable polymer-infiltrated air cavity functioned as one of the interference arms of MZI, and the residual GIF core functioned as the other. Two MZIs with different cavity lengths and infiltrated with the UV-curable polymers, having the refractive indexes on the different sides of the turning point, were created. Moreover, the effects of the length and the bending way of transmission SMF between the first and the second MZI were studied. As a result, the cascaded MZI temperature sensor exhibits a greatly enhanced temperature sensitivity of −24.86 nm/°C based on wavelength differential detection. The aforementioned result makes it promising for high-accuracy temperature measurements in biomedical, oceanographic, and photovoltaic applications. [ABSTRACT FROM AUTHOR]

The feed water heaters in power plants are actually the condensers using turbine extracting steam to heat feed water. The vertical feed water heater occupies less area than the horizontal one and convenient to lift tube bundles out in maintenance. However, the lower heat transfer coefficient due to thick condensate film limits its application. A novel trisection helical baffled vertical condenser (feed water heater) is proposed with liquid dams and gaps for facilitating condensate drainage. The flow and condensation heat transfer characters of two vertical condensers with variable angled trisection helical baffles of both single-thread and dual-threads and a variable spanned segmental baffled one were numerically studied with Mixture model of Fluent software. The distributions of velocity, pressure, volume fraction of condensate, and local heat transfer coefficient in these heat exchangers were demonstrated. The simulation results show that the inclined baffles with liquid dam and drainage gaps could drain condensate effectively from tube bundle surfaces and prevent liquid film from entraining into vapor, and that the variable angled trisection helical baffled vertical condenser with dual-threads could greatly improve the condensation heat transfer coefficient up to 35.7% higher than that of the variable spanned segmental baffled one. [ABSTRACT FROM AUTHOR]

• The power plant feedwater heaters and the countercurrent U-tube heat exchangers all involve half-cylindrical shell space. • Half-cylindrical space heat exchangers with ladder helical, orifice and segmental baffles were experimentally investigated. • The ladder helical baffle scheme has superior heat transfer coefficient and comprehensive index than those of the other ones. • The orifice baffle scheme has higher comprehensive index but lower heat transfer coefficient than those of segmental ones. • The average values of h o Δ p o −1/3 of ladder helical and orifice baffle schemes are about 15% higher than that of segmental one. The superheated steam cooling section and the condensate cooling section of the power plant feedwater heaters and the countercurrent U-tube heat exchangers all involve heat transfer in half-cylindrical shell space. The overall and shell-side heat transfer coefficients (h.t.cs.), pressure drop, and the comprehensive performances of some half-cylindrical space heat exchangers with different baffle structures were experimentally investigated. The investigated structures include three ladder helical baffle types [single inclined ladder helical (SH), dual inclined ladder helical (DH) and folded ladder helical (FH)], three orifice baffle types [fillet triangle orifice (F), trefoil-orifice (T) and quatrefoil-orifice (Q)], and segmental baffles (S), and all schemes are of two baffle pitches. Under the same baffle pitch and working condition, the experimental results show that the shell-side h.t.cs. of the ladder helical baffle schemes are higher than those of the orifice baffle schemes and segmental baffle ones; and the shell-side pressure drops of the orifice baffle schemes are much lower than those of the ladder helical baffle schemes and the segmental ones. The values of average comprehensive index h o Δ p o −1/3 of the ladder helical schemes FH-40, DH-40 and the orifice baffle schemes F-40 and T-40 are respectively 14.26%, 17.58%, 15.62% and 12.82% higher than that of the segmental scheme S-40. [ABSTRACT FROM AUTHOR]

• A novel helical baffle with small inclined angle and folded structure is proposed. • The new helical baffles can be created by cheap 2D laser cutting and folding. • The leakage between two folded helical baffles can be greatly decreased. • The novel electric heaters have excellent flow and heat transfer performances. • Folded helical baffles are more excellent at large equivalent angles in this work. The difficult manufacturing of helical baffles hinders the widespread application of the enhancement technology and the shortcut leakage between adjacent baffles impairs the enhancement effects. To solve these two issues, the promising anti-leakage and easy-to-manufacture helical baffles with small inclined angle and folded structure are proposed, which can be produced by 2D laser cutting and simple mechanical folding. The influence of different helical baffle configurations, including three normal helical schemes, three axial separation helical schemes, three novel folded axial separation helical baffle schemes and a segmental scheme on the performance of electric heaters are numerically investigated. The equivalent angles of helical schemes adopted in this work are 15°, 20° and 25°, and the inclined angle of helical baffles under axial separation connection style is 10°. Compared with the corresponding axial separation scheme without folding, the leakage can be significantly decreased, the heat transfer coefficients h and the comprehensive indices h ⋅Δ p −1/3 of FH15(10)°, FH20(10)° and FH25(10)° are increased by 6.5%/2.3%, 12.2%/7.3% and 20.4%/13.0%, and the averaged tube wall temperatures T w are decreased by 12.5 K, 25.4 K and 54.7 K, respectively. This research can provide feasibility for the extended application of helical baffles in electric heaters or heat exchangers. [ABSTRACT FROM AUTHOR]

• A novel helical baffle with small inclined angle and folded structure is proposed. • The new helical baffles can be created by cheap 2D laser cutting and folding. • The leakage between two folded helical baffles can be greatly decreased. • The novel electric heaters have excellent flow and heat transfer performances. • Folded helical baffles are more excellent at large equivalent angles in this work. The difficult manufacturing of helical baffles hinders the widespread application of the enhancement technology and the shortcut leakage between adjacent baffles impairs the enhancement effects. To solve these two issues, the promising anti-leakage and easy-to-manufacture helical baffles with small inclined angle and folded structure are proposed, which can be produced by 2D laser cutting and simple mechanical folding. The influence of different helical baffle configurations, including three normal helical schemes, three axial separation helical schemes, three novel folded axial separation helical baffle schemes and a segmental scheme on the performance of electric heaters are numerically investigated. The equivalent angles of helical schemes adopted in this work are 15°, 20° and 25°, and the inclined angle of helical baffles under axial separation connection style is 10°. Compared with the corresponding axial separation scheme without folding, the leakage can be significantly decreased, the heat transfer coefficients h and the comprehensive indices h ⋅Δ p −1/3 of FH15(10)°, FH20(10)° and FH25(10)° are increased by 6.5%/2.3%, 12.2%/7.3% and 20.4%/13.0%, and the averaged tube wall temperatures T w are decreased by 12.5 K, 25.4 K and 54.7 K, respectively. This research can provide feasibility for the extended application of helical baffles in electric heaters or heat exchangers. [ABSTRACT FROM AUTHOR]

• A novel square-tube-layout coupling-vortex scheme is proposed in TETHX. • More uniform temperature fields are observed in coupling-vortex schemes. • Nu, f reduce but Nu∙f −1/3 rises with rising S , but all increase with rising A / B. • The smaller S and the closer A / B is to 1, the more obvious advantage of TETHX-CV. • Nu / f / Nu ∙ f −1/3 of C12.3S50 are 12.8%/15.2%/7.6% higher than those of P12.3S50. The twisted elliptical tube heat exchangers with the novel coupling-vortex chessboard tube layout (TETHXs-CV) were simulated with the RNG k - ε model in software Fluent 15.0. The shell-side flow pattern at the tangential points between adjacent tubes in traditional TETHX is countercurrent while that in TETHX-CV is concurrent, which helps enhance heat transfer capability without any extra manufacturing cost. The impacts of the ratio A / B of the major axis to the minor axis and the twist pitch S were also investigated. The results indicate that with the increase of A / B and the decrease of S , the secondary flow behaves more intensely, the Nusselt number Nu and the friction factor f increase, while with the increase of A / B and S , the comprehensive evaluation index Nu∙f −1/3 increases. The Nu, f and Nu ∙ f −1/3 of all twisted tube schemes are higher than those of the smooth round tube schemes R10.8. Compared with corresponding parallel-vortex schemes, the coupling-vortex schemes possess more uniform temperature fields, and the average Nu, f and Nu ∙ f −1/3 of the coupling-vortex schemes C12.3S50/C12.3S100 increase by 12.8%/9.9%, 15.2%/10.5% and 7.6%/6.3%, respectively; the smaller S or the closer A / B is to 1, the more advantageous the TETHX-CV. [ABSTRACT FROM AUTHOR]

The silver loaded adsorbents has been demonstrated to be an exciting approach towards Hg 0 removal from natural gas streams, its Hg 0 removal efficiency and capacity is closely related to the valence state, particle size and dispersity of silver particles. This study focused on chemical reduction methods in aqueous solutions to synthesize Ag/4A zeolite, and the influences of ultrasonic and protective additives were investigated to reduce the size of silver particles. The characterization results showed that silver particles are loaded on the surface of 4A zeolite with highly dispersed elemental form, ultrasonic and addition of stearic acid as protective additives are the effective ways to produce small nano-scale silver particles close to 15 nm. Meanwhile, the silver particles on the surface of Ag/4A zeolite are the active sites for Hg 0 adsorption which can react with Hg 0 to form Ag-Hg amalgam alloy. The silver lattices disappeared from the outer boundary to the interior of the particles after Hg 0 adsorption, which indicated that the Hg 0 firstly reacts with the nano-scale silver on the surfaces and then gradually penetrates into the interior of silver particles. The Hg 0 removal efficiency of prepared Ag/4A zeolite adsorbents was higher than 96% after 200 min adsorption at 30 °C, and adsorption capacity reached to 5.985 mg/g. Furthermore, the regeneration and reutilization results indicated that the Hg 0 adsorption performance remained stable after 5 reuse cycles. [ABSTRACT FROM AUTHOR]

In this paper, AlGaN/GaN Fin-HEMTs with different fin configurations are theoretically and experimentally investigated. A simple physical-based threshold voltage model for AlGaN/GaN Fin-HEMTs is built for qualitative analysis. It is shown that the threshold voltage of AlGaN/GaN Fin-HEMTs depends on the width and height of the fin structure. The peak value and linearity of transconductance and current gain cutoff frequency are improved by reducing the fin length. It is also found that the linearity of transconductance is sensitive to the fin height, which can be attributed to the capacitance control from sidewalls. [ABSTRACT FROM AUTHOR]

To explore the sulfur transformation in the grading utilization of coal, the forms and distributions of sulfur at different operation parameters and foreign minerals were investigated in coal pyrolysis with solid heat carrier and combustion, respectively. The results show that the increasing pyrolysis temperature increases the sulfur content in the gaseous phase. For the coal with larger particle size, more sulfur will residue in char. The change of the mass ratio of quartz sand to coal and heating rate have little effect on the sulfur distribution in gas, tar and char products. After 3 wt% CaO is introduced to the raw coal, sulfur in gas and tar decreases from 29.68 and 12.16 wt% of the raw coal to 22.31 and 10.66 wt%, respectively. Fe 2 O 3 mainly affects the migration of gaseous sulfur to solid phase sulfur during coal pyrolysis. MgO, NaOH, and KOH have no sulfur fixation effect. The sulfur-fixed efficiencies for 3 wt% CaO and 3 wt% Fe 2 O 3 are 17.17 and 38.16 wt%, respectively. When the contents of CaO and Fe 2 O 3 increase, the sulfate sulfur and sulfide sulfur in the char increase, and the sulfur fixed in ash which obtained from the combustion of char increases. The inhibitory effect of CaO on the secondary release of SO 2 in the combustion stage is stronger than that of Fe 2 O 3 . This paper provides a basic reference for the removal of sulfur during the step conversion of coal pyrolysis and combustion. [ABSTRACT FROM AUTHOR]

Hollow multicomponent transition metal oxide nanostructures have caused extensive attention due to their enhanced performances in lithium-ion batteries (LIBs). Herein, a hybrid of multicomponent 3NiO·2Ni 3/2 Co 1/2 ZnO 4 nanocomposite with porous hollow dodecahedron nanostructures (3NiO·2Ni 3/2 Co 1/2 ZnO 4 -HD) was fabricated by carbonization of NiCoZn-layered double hydroxides which were derived from multimetallic zeolitic imidazolate frameworks (Zn/Co-ZIFs) as both self-sacrificial template and precursors. The 3NiO·2Ni 3/2 Co 1/2 ZnO 4 -HD nanocomposites were carefully characterized by various techniques including scanning electron microscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy, thermogravimetric analysis, N 2 adsorption/desorption, transmission electron microscopy, Four-Point Probes and electrochemical techniques. When the 3NiO·2Ni 3/2 Co 1/2 ZnO 4 -HD nanocomposites were acted as anode materials for LIBs, a capacity of about 1337 mA h g −1 could be obtained after 100 cycles. The improved electrochemical performances might originate from synergistic effect of multicomponents, enhanced electrical conductivity and porous hollow dodecahedron nanostructures which could effectively alleviate volume deformation in the process of discharge/charge, accelerate mass transfer and increase the active sites for Li + storage. [ABSTRACT FROM AUTHOR]

Porous MnO@C core-shell nanowires were prepared via a simple and facile method. The morphologies, the phase purity, the mass contents, and the BET surface area of the composite were characterized by SEM, XRD, TGA, and N2 adsorption test, respectively. When the composite served as an anode for lithium-ion batteries, it showed superior electrochemical performances. The MnO@C composite presented a reversible capacity of 448.1 mAh g−1 after 100 cycles at the current rate of 200 mA g−1. [ABSTRACT FROM AUTHOR]

Abstract: A three-dimensional model of heat transfer and fluid flow in noncircular microchannel heat sinks is developed and analyzed numerically. It is found that Nusselt number has a much higher value at the inlet region, but quickly approaches the constant fully developed value. The temperature in both solid and fluid increases along the flow direction. In addition, the comparison of thermal efficiencies is conducted among triangular, rectangular and trapezoidal microchannels. The result indicates that the triangular microchannel has the highest thermal efficiency. [Copyright &y& Elsevier]

Abstract: A visualization experiment is conducted to investigate the condensation of steam in a series of triangular silicon microchannels. The results indicate that droplet, annular, injection and slug-bubbly flow are the dominant flow patterns in these triangular silicon microchannels. With increased mass flow rate, or an increase in the hydraulic diameter under the same Reynolds number, the location at which the injection occurred is observed to move towards the channel outlet. The frequency of the injection increases, i.e. the flow of condensation instability is higher with increased inlet vapor Reynolds number, condensate Weber number and the prolongation of the injection location, or with a decrease in the hydraulic diameter of the channel. In addition, the wall temperature of the channel decreases along the condensation stream. The total pressure drop, the average condensation heat transfer coefficient and the average Nusselt number are observed to be larger with increased inlet vapor Reynolds number. Moreover, it is found that the condensation heat transfer is enhanced by a reduction in the channel scale. [Copyright &y& Elsevier]

Abstract: A theoretical model of fluid flow and heat transfer in a heat pipe with axial “Ω”-shaped grooves has been conducted to study the maximum heat transport capability of these types of heat pipes. The influence of variations in the capillary radius, liquid–vapor interfacial shear stress and the contact angle are all considered and analyzed. The effect of vapor core and wick structure on the fluid flow characteristics and the effect of the heat load on the capillary radius at the evaporator end cap, as well as the effect of the wick structure on the heat transfer performance are all analyzed numerically and discussed. The axial distribution of the capillary radius, fluid pressure and mean velocity are obtained. In addition, the calculated maximum heat transport capability of the heat pipe at different working temperatures is compared with that obtained from a traditional capillary pressure balance model, in which the interfacial shear stress is neglected. The accuracy of the present model is verified by experimental data obtained in this paper. [Copyright &y& Elsevier]

• Coupling-vortex triangular tube layout is proposed without extra manufacturing cost. • Concurrent flow, larger A / B and smaller S cause stronger secondary flow. • The Nu and Nu · f −1/3 of C14.2S50 is 132.8% and 47.1% higher than R10.8. • Smaller S and smaller A / B lead to greater advantage of TETHXs-AVRCV. • The averaged Nu / Nu · f −1/3 of C12.3S50 are 7.8%/4.9% higher than those of P12.3S50. An innovative alternating V-rows triangular tube layout was devised for the twisted elliptical tube heat exchangers to enhance heat transfer between adjacent tubes. Under the same tube circumference, altogether eleven twisted elliptical tube heat exchangers with two tube layouts, diverse aspect ratios of twisted elliptical tubes and different twisted pitches were constructed and simulated, including five coupling-vortex schemes, five parallel-vortex schemes and a smooth round tube scheme R10.8. Water with constant physical properties was adopted as the working fluid. Shell-side Reynolds number varies from 2000 to 10,000. The results show that the concurrent flow and the irregular channel in coupling-vortex schemes, and the larger aspect ratio and the smaller twisted pitch of twisted elliptical tubes help intensify turbulence and secondary flow. Compared with R10.8, the averaged Nu and Nu · f −1/3 of coupling-vortex scheme C14.2S50 are improved by 132.8% and 47.1%, respectively. Under shorter twisted pitch, smaller aspect ratio and lower Reynolds number, coupling-vortex schemes can acquire superior heat transfer capability than corresponding parallel-vortex schemes but will not increase manufacturing cost. Compared with P12.3S50, the maximum and averaged Nu of C12.3S50 are increased by 9.5% and 7.8% while the maximum and averaged Nu · f −1/3 are increased by 6.4% and 4.9%. [ABSTRACT FROM AUTHOR]

• Thuja sutchuenensis , an endangered China native plant, has been systematically investigated focusing on secondary metabolites. • Eight novel sesquiterpenes (1 – 8) with diverse skeletons were isolated from the stems and roots of T. sutchuenensis. • Compounds 5 (thujasutchin J) and 9 exhibited considerable antibacterial activities with MIC ranging from 6.25 to 25 μg/mL. Eight new sesquiterpenes with diverse skeletons involving four cuparenes, denominated thujasutchins F-I (1 – 4), one eudesmane and one cedrol, named thujasutchin J (5) and thujasutchin K (6), as well as two thujopsenes thujasutchins L-M (7 – 8) together with three known congener compounds (9 – 11) were isolated from EtOAc soluble fraction of ethanolic extract of the stems and roots of Thuja sutchuenensis. Their structures including absolute configurations were unambiguously established by extensive interpretation of the NMR and mass spectroscopic data, X-ray diffractions, and ECD measurements powered by molecular calculations. The biological assays disclosed that 5 and 9 displayed potent inhibitory effect against Staphylococcus. aureus (CMCC 26003), methicillin-resistant Staphylococcus aureus (JCSC 4744), Bacillus cereus (ATCC 10876), and Staphylococcus epidermidis (ATCC 12228) with MICs ranging from 6.25 to 25 μg/mL. [ABSTRACT FROM AUTHOR]