4,376 results on '"*TECHNOLOGY transfer"'
Search Results
2. The Coupling Coordination between Digital Economy and Green High-Quality Development of Industries in China’s the Yangtze River Economic Belt.
- Author
-
Li Liu, Hao Wang, Zhisong Wang, Tao Ding, and Min Wu
- Subjects
- *
SUSTAINABLE development , *HIGH technology industries , *TECHNOLOGY transfer , *DIGITAL technology , *TOBITS , *CITIES & towns , *REGIONAL cooperation - Abstract
The coupling coordination of digital economy and green high-quality development of industries is an important way for sustainable and high-quality economic development. This paper constructs an evaluation index system for the digital economy and industrial green high-quality development, and conducts empirical analysis using the coupling coordination model, the spatial autocorrelation model, and the Tobit model. The data from provinces and cities in the Yangtze River Economic Belt spanning from 2008 to 2021 has been analyzed. Results show that both subsystems exhibit a good and rising coupling coordination, and the regional coupling coordination demonstrates a trend of higher values in the east and lower in the west. Moreover, there is interaction between provinces and cities, albeit with a weakening correlation after 2011. Additionally, spatial clustering is evident between regions with high and low coupling coordination. The coupling coordination degree of each region is impacted by important factors, such as economic development level, financial level, opening up, fiscal expenditure, and urbanization. Therefore, the study recommends policies aimed at boosting the coupling coordination level in the Yangtze River Economic Belt. Key policy proposals contain promoting the integration and innovation of digital technology and green low-carbon technology, strengthening regional cooperation through the transfer of industries, and adopting differentiated development strategies tailored to regional advantages and the varied impact. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
3. Design of passive filter based on magnetic integrated technology for single‐phase grid‐connected inverter.
- Author
-
Jiang, Jianbo, Li, Zhenyu, Zhao, Enming, Li, Peng, Qu, Kai, and Yang, Nianting
- Subjects
- *
MAGNETIC separators , *POWER density , *DENSITY currents , *POWER resources , *TECHNOLOGY transfer , *ELECTRON tube grids - Abstract
In response to the need for smaller and lighter power supply equipment, there has been a push towards higher power density in current power electronic converters. This development aligns well with the requirements of photovoltaic grid‐connected inverters. Among various passive filters utilized in these inverters, the LCL filter stands out as a popular choice. Nevertheless, it should be noted that traditional LCL filters have limited core utilization and exhibit significant redundancy. In view of the above problems, this paper proposes a magnetic integrated passive filter based on ripple transfer technology and carries out volume optimization design. Compared to the conventional LCL filter, the magnetic integrated passive filter offers a reduction in size and weight while preserving its capability to ripples attenuate. Finally, a laboratory prototype with a rated power of 2 kW is built to verify the effectiveness of the proposed magnetic integrated passive filter. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
4. Knowledge generation and diffusion in science & technology: an empirical study of SiC-MOSFET based on scientific papers and patents.
- Author
-
Pan, Weiwei, Jian, Lirong, and Liu, Tao
- Subjects
- *
TECHNOLOGY transfer , *CITATION networks , *PATENTS , *EMPIRICAL research , *METAL oxide semiconductor field-effect transistors , *FIELD-effect transistors , *PATH analysis (Statistics) - Abstract
Scientific papers and patents are reliable sources of knowledge carriers for measuring science and technology advances, predicting technological trends, and formulating technology strategies. Although the idea of entirely using the two knowledge carriers is rapidly emerging in academic discussion, a theoretical framing of the comparisons is still not present in literature. This study conducts bibliometrics on 2986 patent families and 4755 scientific papers related to silicon carbide metal–oxide-semiconductor field-effect transistor (SiC-MOSFET) to identify its technological trends and compare the similarities and differences in knowledge generation and diffusion in science and technology. Our methodological framework consists of a combination of geographic distribution (identifying the research developments and distribution), cooperation networks (analyzing organisation collaboration and individual research cooperation), noun phrase co-occurrence clusters (discovering hot research topics), and the global main path analyses of citation networks (tracking the trajectory of knowledge flows). Ultimately, our results contribute to recent bibliometric paradigms beyond discovering the role of scientific papers and patents in promoting science and technology integration. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
5. The impact on knowledge transfer to scientific and technological innovation efficiency of talents: analysis based on institutional environment in China.
- Author
-
Chen, Shujie, Sun, Jing, and Liang, Yan
- Subjects
- *
KNOWLEDGE transfer , *INSTITUTIONAL environment , *SCIENTIFIC knowledge , *PANEL analysis , *ECONOMETRIC models , *TECHNOLOGICAL innovations , *TECHNOLOGY transfer - Abstract
Knowledge transfer is considered the efficient way to improve regional innovation, but relatively little is known about how the innovation efficiency of scientific and technological (S&T) talents is affected by knowledge transfer within institutional environment, particularly, limited studies carried out regional differentiation analysis. Using panel data from 30 provinces in China between 2005 and 2017, this article empirically tests the influence of the institutional environment on knowledge transfer and analyses its impact between knowledge transfer and innovation efficiency of S&T talents in China. The results show knowledge transfer can significantly improve both the scientific and the economic innovation efficiency of S&T talents. Moreover, the effects of knowledge transfer on the innovation efficiency of S&T talents in eastern, central and western China had heterogeneity. Formal and informal institutions play mediating roles between knowledge transfer and innovation efficiency of S&T talents. This study contributes to the literature by constructing an econometric model with identified variables to test the impact of knowledge transfer on the innovation efficiency of S&T talents in China, in addition, the equation about knowledge transfer was explored. The research findings are valuable to regional governments and policymakers; our empirical evidence helps to develop more efficient strategy and policy planning. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
6. On-site hydrogen refuelling station techno-economic model for a fleet of fuel cell buses.
- Author
-
Caponi, R., Bocci, E., and Del Zotto, L.
- Subjects
- *
FUEL cells , *FUELING , *GREEN fuels , *TECHNOLOGY transfer , *ENERGY consumption , *ELECTRIC motor buses , *TRANSPORTATION costs , *PROTON exchange membrane fuel cells - Abstract
Fuel cell electric buses (FCBs) have proven to be a technically viable solution for transportation, owing to various advantages, such as reliability, simplicity, better energy efficiency, and quietness of operation. However, large-scale adoption of FCBs is hindered by the lack of extensive and structured infrastructure and the high cost of clean hydrogen. Many studies agree that one of the significant contributors to the lack of competitiveness of green hydrogen is the cost of electricity for its production, followed by transportation costs. On the one hand, to reduce the investment cost of the electrolyzer, high operating hours should be achieved; on the other, as the number of operating hours decreases, the impact of the electricity costs declines. This paper presents an innovative algorithm for a scalable hydrogen refuelling station (HRS) capable of successfully matching and identifying the most cost-efficient levelized cost of hydrogen (LCOH) produced via electrolysis and connected to the grid, based on the HRS components' cost curves and the hourly average electricity price profile. The objective is to identify the least-cost range of LCOH by considering both the electric energy and the investment costs associated with a hydrogen demand given by different FCB sizes and electrolyzer rated powers. In addition, sensitivity analyses have been conducted to quantify the technology cost margins, and a cost comparison between the refuelling of an FCB fleet and the recharging infrastructure required for an equivalent fleet of Battery Electric Buse (BEB) has been performed. An LCOH of around 10.5 €/kg varying from 12 €/kg (2 FCB) to 10.2 €/kg (30 FCB) has been found for the best-optimized configurations. The final major conclusion of this paper is that FCB technology is currently not economically competitive. Still, a cost contraction of the electric energy price and the electrolyzer capital investment would lead to a 50% decrease in the LCOH. Furthermore, increasing renewable energies into the grid may shift the electricity cost curve, resulting in higher prices when the BEB recharging demand is more significant. This impact, in addition to the peak power load and longer recharging times, might contribute to bridging the gap with FCBs. • Techno-economic model for the sizing of an HRS with grid-connected electrolyzer. • The widespread diffusion of H2 technology in mobility needs both reliability and cost-effectiveness. • Investigation of various electrolysers rated powers and fuel cell buses fleet size. • An action on both CAPEX and OPEX would lead to potential cost margins improvement. • It is found that the best configuration that balances the CAPEX and OPEX coincides with an LCOH ranging from 12 to 10 €/kg. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
7. The multiple relationships among knowledge heterogeneity, knowledge transfer and knowledge innovation as moderated by microstructure holes.
- Author
-
Wang, Lubang, Dong, Guohui, Xu, Ying, and Zhang, Xinming
- Subjects
- *
KNOWLEDGE transfer , *HETEROGENEITY , *MICROSTRUCTURE , *GOVERNMENT business enterprises , *ORGANIZATIONAL structure , *TECHNOLOGY transfer , *TECHNOLOGICAL innovations - Abstract
The positive relationship between knowledge transfer and knowledge innovation is recognized by most scholars, while knowledge heterogeneity, as a knowledge situation of the enterprise organization, affects knowledge transfer within enterprise organizations. Therefore, as a state, knowledge transfer can be regarded as a result of knowledge heterogeneity, and it becomes the intermediary state between knowledge heterogeneity and knowledge innovation. The organizational structure of individuals within an enterprise organization may affect these three elements and their interrelationships. In this paper, data are collected by means of on-the-spot investigation and a network questionnaire for analysis. The results show that the microstructure state of the individual in the enterprise organization plays a moderating role for the first three elements. The lower that the micro-restriction of the individual is, the more favorable the knowledge heterogeneity is for the inverted U-shaped impact of knowledge transfer and knowledge innovation and the more favorable the occurrence of knowledge innovation. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
8. A study of blockchain-based liquidity cross-chain model.
- Author
-
Han, Yutong, Wang, Chundong, Wang, Huaibin, Yang, Yi, and Wang, Xi
- Subjects
- *
LIQUIDITY (Economics) , *BORROWING capacity , *TECHNOLOGY transfer - Abstract
Blockchain cross-chaining is about interconnectivity and interoperability between chains and involves both physical to virtual digital aspects and cross-chaining between digital networks. During the process, the liquidity transfer of information or assets can increase the use of items with other chains, so it is worth noting that the enhancement of cross-chain liquidity is of great practical importance to cross-chain technology. In this model, Layerzero is used as the primary secure cross-chain facility to build a full-chain identity by unifying NFT-distributed autonomous cross-chain identity IDs; applying super-contract pairs to enhance cross-chain liquidity; and initiating a dynamic transaction node creditworthiness model to increase the security of the cross-chain model and its risk management. Finally, by verifying three important property metrics timeliness is improved by at least 18%, robustness is increased by at least 50.9%, and radius of convergence is reduced by at least 25%. It is verified that the liquidity cross-chain model can eliminate the authentication transition between hierarchies while saving the cross-chain time cost, as a way to truly realize the liquid interoperability between multiple chains of blockchain. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
9. The development status and future trends of lubricant additives technology: Based on patents analysis.
- Author
-
Wang, Mianqing, He, Hua, Fang, Xi, and Li, Hui
- Subjects
- *
LUBRICANT additives , *PATENTS , *TECHNOLOGY transfer - Abstract
In order to reveal the current status and future trends of lubricant additives, this study analyzes the structured and unstructured data of 77701 lubricant additive patents recorded by Patsnap. The results show that China is the country with the largest number of patents in this field, and the United States is the main exporting country of international technology flow; the current research and development of lubricant additives is dominated by multifunctional composite additives; environmentally friendly additive compositions are the current research hotspot; and more environmentally friendly and economically degradable additives have more development potential in the future. Overall, this study provides a comprehensive understanding of the research and application of lubricant additives and contributes to the future development of the lubricant industry. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
10. CCW-YOLOv5: A forward-looking sonar target method based on coordinate convolution and modified boundary frame loss.
- Author
-
Sun, Yan and Yin, Bo
- Subjects
- *
SONAR imaging , *SONAR , *OBJECT recognition (Computer vision) , *FEATURE extraction , *TECHNOLOGY transfer - Abstract
Multi beam forward looking sonar plays an important role in underwater detection. However, due to the complex underwater environment, unclear features, and susceptibility to noise interference, most forward looking sonar systems have poor recognition performance. The research on MFLS for underwater target detection faces some challenges. Therefore, this study proposes innovative improvements to the YOLOv5 algorithm to address the above issues. On the basis of maintaining the original YOLOv5 architecture, this improved model introduces transfer learning technology to overcome the limitation of scarce sonar image data. At the same time, by incorporating the concept of coordinate convolution, the improved model can extract features with rich positional information, significantly enhancing the model's detection ability for small underwater targets. Furthermore, in order to solve the problem of feature extraction in forward looking sonar images, this study integrates attention mechanisms. This mechanism expands the receptive field of the model and optimizes the feature learning process by highlighting key details while suppressing irrelevant information. These improvements not only enhance the recognition accuracy of the model for sonar images, but also enhance its applicability and generalization performance in different underwater environments. In response to the common problem of uneven training sample quality in forward looking sonar imaging technology, this study made a key improvement to the classic YOLOv5 algorithm. By adjusting the bounding box loss function of YOLOv5, the model's over sensitivity to low-quality samples was reduced, thereby reducing the punishment on these samples. After a series of comparative experiments, the newly proposed CCW-YOLOv5 algorithm has achieved detection accuracy in object detection mAP@0.5 Reached 85.3%, and the fastest inference speed tested on the local machine was 54 FPS, showing significant improvement and performance improvement compared to existing advanced algorithms. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
11. International and Domestic Factors of Battery Electric Vehicle Technology Diffusion in Japan.
- Author
-
Satrio, Jati, Juned, Mansur, and Salam, Syahrul
- Subjects
- *
ELECTRIC vehicles , *TECHNOLOGY transfer , *ELECTRIC vehicle batteries , *INNOVATION adoption , *AUTOMOBILE industry - Abstract
This paper studies the diffusion of battery electric vehicle (BEV) technology in Japan. The diffusion process in this study refers to both the innovation and adoption of BEV technology. While previous studies on BEV technological diffusion focus on policy selection, especially domestic policy, little is known about the connectedness between international and domestic factors in the BEV technological diffusion process. This paper aims to enrich the discussion of technology diffusion by expanding the argument that technology diffusion is not only a domestic problem but also an international relations problem using a case study of BEV technology diffusion in Japan. The findings indicate that two international factors push Japan to diffuse BEV technology: Japanese commitment to the global environmental regime and global competition in BEV manufacturing. However, the domestic institution factor hinders the BEV technology diffusion. The production structures of automobile industries and political economy relations between the automobile industry and the government further complicate the diffusion process of BEV technology. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
12. Research and design of image style transfer technology based on multi‐scale convolutional neural network feature fusion.
- Author
-
Liang, Yongzhen, Lin, Feng, Xie, Wensheng, Wang, Jinzhong, and Nie, Tian
- Subjects
- *
CONVOLUTIONAL neural networks , *TECHNOLOGY transfer , *FEATURE extraction , *ENTROPY (Information theory) , *SIGNAL-to-noise ratio - Abstract
To reduce the occurrence of information loss and distortion in image style transfer, a method is proposed for researching and designing image style transfer technology based on multi‐scale convolutional neural networks (CNNs) feature fusion. Initially, the VGG19 model is designed for coarse and fine‐scale networks to achieve multi‐scale CNN feature extraction of target image information. Subsequently, while setting the corresponding feature loss function, an additional least‐squares penalty parameter is introduced to balance the optimal total loss function. Finally, leveraging the characteristics of stochastic gradient descent iteration, image features are fused and reconstructed to obtain better style transfer images. Experimental evaluations utilize peak signal‐to‐noise ratio (PSNR), structural similarity index (SSIM), information entropy (IE), and mean squared error (MSE) as metrics for assessing the transferred images, comparing them with three typical image style transfer methods. Results demonstrate that the proposed method achieves optimal performance across all metrics, realizing superior image style transfer effects. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
13. The Rise and Fall of Technological Leadership: General-Purpose Technology Diffusion and Economic Power Transitions.
- Author
-
Ding, Jeffrey
- Subjects
- *
POWER (Social sciences) , *TECHNOLOGY transfer , *TECHNOLOGICAL revolution , *TECHNOLOGICAL innovations , *WORLD War I , *INDUSTRY 4.0 - Abstract
How do technological revolutions affect the rise and fall of great powers? Scholars have long observed that major technological breakthroughs disrupt economic power balances, yet they rarely investigate how this process occurs. Existing studies establish that a nation's success in adapting to revolutionary technologies is determined by the fit between its institutions and the demands of these technologies. The standard explanation emphasizes institutions suited for monopolizing innovation in new, fast-growing industries (leading sectors). I outline an alternative pathway based on general-purpose technologies (GPTs), foundational advances that boost productivity only after an extended diffusion process across many sectors. Specifically, GPT diffusion demands institutional adaptations that widen the base of engineering skills associated with a GPT. To test this argument, I set the GPT mechanism against the leading-sector mechanism across three cases, which correspond to past industrial revolutions: Britain's rise to preeminence in the early nineteenth century; the United States's overtaking of Britain before World War I; Japan's challenge to US technological dominance in the late twentieth century. The findings support a novel explanation for technology-driven power transitions, directly bearing on how emerging technologies like AI, which some regard as driving a fourth industrial revolution, could influence a possible US–China power transition. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
14. 'Finprint' technopolitics and the corporatisation of global food governance.
- Author
-
Martin, Sarah J. and Mather, Charles
- Subjects
- *
SALMON farming , *TECHNOLOGY transfer , *AQUACULTURE industry , *AQUACULTURE ,DEVELOPING countries - Abstract
Our concern in this paper is the environmental 'footprinting' of food and its role as a source of technopolitical power in global food governance. Our case is the highly industrialised farmed salmon sector which currently generates metrics and carefully curated visualisations to promote this fish as a more sustainable and 'climate friendly' protein relative to animal protein produced on land. We show how these metrics and visualisations depend on an industrial production and measurement infrastructure. Significantly, this infrastructure and the metrics that it generates is being promoted as a 'climate smart' solution to small‐scale and extensive aquaculture in the Global South. Salmon aquaculture industry proposals for the transfer of technology from salmon farming to global aquaculture are explicitly articulated in global food governance and other institutional spaces. While there may be frictions in the transfer of salmon aquaculture's infrastructure of measurement to aquaculture in the Global South, our analysis suggests that environmental footprinting of food—and its associated measurement infrastructure—may be an emerging source of technopolitical power in increasingly corporatised global food governance systems. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
15. Transfer of ESTs in international law: A climate justice approach.
- Author
-
Gupta, Vindhya, Jadhav, Dhanaji, and Ronald, Bindu
- Subjects
- *
CLIMATE justice , *GREENHOUSE gas mitigation , *TECHNOLOGY transfer , *INTERNATIONAL law , *TECHNOLOGICAL innovations , *INTELLECTUAL property ,DEVELOPING countries - Abstract
Early industrialization of the developed countries has enabled their leadership in technological innovation, including environmentally sound technologies. ESTs are technologies that help prevent, control, or reduce greenhouse gas emissions. Endorsed as an integral part of climate action, a binding obligation to ensure access for global south to these technologies remains missing from international environment law and international intellectual property rights law. Transfer of technology also faces certain economic barriers such as lack of infrastructure and human resources that enable adoption and absorption of ESTs. Moreover, there exists ideological differences between developed countries and developing and least developed countries regarding mechanism of technology transfer, creating an impasse in international negotiations to achieve EST transfer. In this paper the author has attempted to reframe the discussion on transfer of ESTs through a climate justice perspective. An incorporation of the practical aspects of the common but differentiated responsibilities of the developed countries into the TRIPS regime, in the form of binding obligations to technology transfer and financial assistance, or relaxations in patent protections, may provide adequate resolution. A balanced and rational approach to EST transfer, beyond the exigencies of global politics, is necessary for the continued prosperity of the Earth. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
16. SETL: a transfer learning based dynamic ensemble classifier for concept drift detection in streaming data.
- Author
-
Arora, Shruti, Rani, Rinkle, and Saxena, Nitin
- Subjects
- *
MACHINE learning , *PLURALITY voting , *TECHNOLOGY transfer , *CHARGE transfer , *COHEN'S kappa coefficient (Statistics) - Abstract
Concept drift is one of the most prominent issues in streaming data that machine learning models need to address. Most of the research in the field of concept drift targets updating the prediction model for recovery from concept drift. A little effort has been put into the development of a learning system that can learn drifting concepts with minimal overhead. In this paper, a dynamic ensemble classifier is designed to detect and adapt the concept drifts in streaming data. Thereupon, a novel approach- Selective Ensemble using Transfer Learning (SETL) is proposed that has the ability to adapt the new concept of data. It employs a transfer learning and a weighted majority voting scheme to enable resource optimization. It also overcomes the issues, such as negative transfer and overfitting that may occur during the process of transfer learning. The experiments are performed using real-world open-source datasets. The results indicate that SETL outperforms existing state-of-the-art algorithms for most of the datasets in terms of performance metrics such as Accuracy, F1-score, Kappa measure, precision and recall. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
17. Challenges and progress in applying space technology in support of the sustainable development goals.
- Author
-
Wood, Danielle, Rathnasabapathy, Minoo, Stober, Keith Javier, and Menon, Pranav
- Subjects
- *
ASTRONAUTICS , *HUMAN space flight , *ARTIFICIAL satellites in navigation , *TELECOMMUNICATION satellites , *TECHNOLOGY transfer , *SATELLITE positioning , *ARTIFICIAL satellites - Abstract
The global community, with coordination from the United Nations, is energized to pursue the Sustainable Development Goals (SDGs), a list of 17 important aspirations that summarize the key challenges of our era. The SDGs apply to every nation and represent an international effort to eliminate extreme poverty, ensure access to safe drinking water, strengthen food security, and produce clean and reliable energy, among other pursuits. Space technology is already being used around the world to advance progress toward the SDGs and monitor their related Indicators. This paper explores how six technologies related to space—satellite Earth observation, satellite communication, satellite navigation and positioning, human spaceflight and microgravity research, space technology transfer, and basic scientific research—are being used to realize the vision that the SDGs represent. The paper also discusses the obstacles that limit the application of these technologies for the SDGs and provides an overview of potential paths to overcome these barriers. The paper finally studies the historical and potential roles that four distinct types of entities involved in global sustainable development—governments, non- and inter-governmental organizations, entrepreneurial companies, and universities— have played or may play in the application of space technologies towards the SDGs. • Six space technology areas are shown to support the U.N. Sustainable Development Goals. • Examples of space projects that support the SDGs are found in many sectors. • New designs for technology are needed to improve effectiveness of space applications for the SDGS. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
18. Inbound and outbound strategies to overcome technology transfer barriers from university to industry: a compendium for technology transfer offices.
- Author
-
Pohlmann, Jaime Roberto, Duarte Ribeiro, Jose Luis, and Marcon, Arthur
- Subjects
- *
TECHNOLOGY transfer , *OFFICES , *TECHNOLOGICAL innovations , *RESEARCH questions , *SOCIOCULTURAL factors - Abstract
This study identifies and discusses strategies for enhancing the efficiency of technology transferring from university to the industrial sector, concerning activities carried out by Technology Transfer Offices (TTOs). The study answers two research questions: (i) What barriers hamper academic research transferring to industry? (ii) What are the inbound and outbound strategies for transferring academic research results to industry? Our findings show that the main barriers that hamper technology transfer are related to organisational, technical, human, and cultural factors comprising the academic and industrial environments. Regarding strategies, our findings reveal a comprehensive list of inbound and outbound strategies that might be implemented to cope with the ambidextrous nature of the TTOs and increase technology transfer. Finally, we discuss our findings and the relationship between the main barriers and the boundary-spanning strategies to support a more effective Technology Transfer process. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
19. The role of nanoparticles in non‐invasive electrochemical immunosensor technology and recent developments.
- Author
-
Sanko, Vildan, Erkmen, Cem, and Kuralay, Filiz
- Subjects
- *
NANOPARTICLES , *CHARGE exchange , *WEARABLE technology , *BIOMARKERS , *TECHNOLOGY transfer - Abstract
Electrochemistry has been one of the important tools in determining or evaluating vital conditions with the help of powerful and influential electrode designs. The fundamentals of electrochemical determination are simply based on direct or indirect electron transfer that occurs during the process such as the recognition of target molecules by biorecognition elements. Therefore, electrochemical biosensors have been a significant development for promising analytical applications, particularly in the field of biomedicine. In this context, electrochemical immunosensors, which can detect important biomarkers, provide many advantages with their good analytical performance and practicability. Innovation in electrochemical immunosensors continues rapidly, and non‐invasive wearable sensor technologies, especially personal equipment, come to the fore. Developments in the field of nanotechnology can easily be cited as an important driving force of these advances. Therefore, in this review, the design technology of non‐invasive immunosensors used for electrochemical biomarker detection is briefly reviewed and the contribution of nanoparticles to the efficiency of the process is examined to provide a basis for future applications. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
20. Safety TransfEr Methodology (STEM): a structured methodology for transferring safety innovation across sectors.
- Author
-
Liston, Paul M., Silvagni, Sara, and Ducci, Marco
- Subjects
- *
TECHNOLOGY transfer , *DATABASES , *DATABASE industry , *ACTION research , *SOCIOTECHNICAL systems , *AERONAUTICAL safety measures , *TECHNOLOGICAL innovations - Abstract
This research sought to develop a structured methodology for transferring resilience resources and safety innovation across industrial sectors, specifically, from aviation to maritime. As transportation sectors struggle to adapt to new economic realities and seek to prosper in new operational contexts there is a need to preserve resources and invest in change initiatives which will derive meaningful impact. A structured methodology to guide a principled transfer of safety solutions across sectors would be a sustainable method of improving the resilience of the sector. An action research approach was adopted. A five-step methodology was developed in cooperation with three maritime organisations to identify challenges and resilience resources from aviation which could be feasibly transferred and implemented. Five steps were identified as being key to a principled transfer of resilience resources from aviation to maritime. They were as follows: (1) industry comparison and database of aviation resilience resources; (2) maritime user needs and gap analysis, and resilience resources evaluation and selection; (3) scenarios production and resources mapping onto scenarios; (4) feasibility analysis; and (5) implementation plan. The results highlight the utility of combining bottom-up (identifying problems) and top-down (identifying a database of resources) approaches at the outset. A comprehensive workshop-based feasibility analysis is also key to ensuring the identified resources can be effectively implemented in the destination sector. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
21. Multidimensional evolutionary analysis of China's BIM technology policy based on quantitative mapping.
- Author
-
Chen, Yonghong and Ding, Chenyongjun
- Subjects
- *
NATURAL language processing , *DIGITAL transformation , *TECHNOLOGICAL innovations , *DIGITAL technology , *BUILDING information modeling , *TECHNOLOGY transfer - Abstract
In the wave of the digital era, Building Information Modelling (BIM) has emerged as the primary tool for intelligent construction and digital transformation in the Architecture, Engineering, and Construction (AEC) industry. China's focus on policy guidance for the dissemination and application of BIM technology has promoted high-quality development and technological innovation in the AEC industry. However, few studies have described the multi-dimensional evolution picture of BIM technology policy in China, and lack of effective grasp and prediction of policy evolution law and future direction. An improved policy quantitative analysis framework is built using natural language processing (NLP) based on deep learning in this paper. The dynamic characteristics of 242 Chinese BIM technology policy documents from 1998 to 2022 in the PKULAW database are quantitatively analyzed by the framework, and the four-stage integrated evolution of Chinese BIM technology policy is quantitatively mapped in a visual form through network analysis and dynamic topic model (DTM). Furthermore, this research conducts a comprehensive discussion from three dimensions, providing valuable insights for policy makers and industry participants in China. The findings contribute to the deep integration of policy optimization and the construction industry, while also aiming to share China's experience in BIM technology governance with other countries and regions. Ultimately, this study seeks to support the global AEC industry in its digital transformation and development by offering valuable knowledge and perspectives. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
22. How do the Substance Abuse and Mental Health Services Administration's Technology Transfer Centers Decide What Evidence-Based Practices to Disseminate and Determine How to Do So? A Cross-Sectional Study of a National Network.
- Author
-
Reho, Kaitlyn, Agley, Jon, Gassman, Ruth, Roberts, Jeffrey, Heil, Susan K. R., and Katara, Jharna
- Abstract
It is important to use evidence-based programs and practices (EBPs) to address major public health issues. However, those who use EBPs in real-world settings often require support in bridging the research-to-practice gap. In the US, one of the largest systems that provides such support is the Substance Abuse and Mental Health Services Administration's (SAMHSA's) Technology Transfer Center (TTC) Network. As part of a large external evaluation of the Network, this study examined how TTCs determine which EBPs to promote and how to promote them. Using semi-structured interviews and pre-testing, we developed a "Determinants of Technology Transfer" survey that was completed by 100% of TTCs in the Network. Because the study period overlapped with the onset of the COVID-19 pandemic, we also conducted a retrospective pre/post-pandemic comparison of determinants. TTCs reported relying on a broad group of factors when selecting EBPs to disseminate and the methods to do so. Stakeholder and target audience input and needs were consistently the most important determinant (both before and during COVID-19), while some other determinants fluctuated around the pandemic (e.g., public health mandates, instructions in the funding opportunity announcements). We discuss implications of the findings for technology transfer and frame the analyses in terms of the Interactive Systems Framework for Dissemination and Implementation. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
23. Novel Technologies towards the Implementation and Exploitation of "Green" Wireless Agriculture Sensors.
- Author
-
Vassiliou, Loukia, Nadeem, Adnan, Chatzichristodoulou, David, Vryonides, Photos, and Nikolaou, Symeon
- Subjects
- *
WIRELESS sensor networks , *TRANSMITTERS (Communication) , *TECHNOLOGY transfer , *WIRELESS power transmission , *DETECTORS , *ENERGY harvesting , *PRECISION farming , *ARTIFICIAL intelligence - Abstract
This manuscript presents the use of three novel technologies for the implementation of wireless green battery-less sensors that can be used in agriculture. The three technologies, namely, additive manufacturing, energy harvesting, and wireless power transfer from airborne transmitters carried from UAVs, are considered for smart agriculture applications, and their combined use is demonstrated in a case study experiment. Additive manufacturing is exploited for the implementation of both RFID-based sensors and passive sensors based on humidity-sensitive materials. A number of energy-harvesting systems at UHF and ISM frequencies are presented, which are in the position to power platforms of wireless sensors, including humidity and temperature IC sensors used as agriculture sensors. Finally, in order to provide wireless energy to the soil-based sensors with energy harvesting features, wireless power transfer (WPT) from UAV carried transmitters is utilized. The use of these technologies can facilitate the extensive use and exploitation of battery-less wireless sensors, which are environmentally friendly and, thus, "green". Additionally, it can potentially drive precision agriculture in the next era through the implementation of a vast network of wireless green sensors which can collect and communicate data to airborne readers so as to support, the Artificial Intelligence and Machine Learning-based decision-making with data. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
24. LJCD-Net: Cross-Domain Jamming Generalization Diagnostic Network Based on Deep Adversarial Transfer.
- Author
-
Zhang, Zhichao, Deng, Zhongliang, Liu, Jingrong, Ding, Zhenke, and Liu, Bingxun
- Subjects
- *
GLOBAL Positioning System , *RADAR interference , *IMAGE recognition (Computer vision) , *DISTRIBUTION (Probability theory) , *TECHNOLOGY transfer , *CONVOLUTIONAL neural networks , *GENERALIZATION - Abstract
Global Navigation Satellite Systems (GNSS) offer comprehensive position, navigation, and timing (PNT) estimates worldwide. Given the growing demand for reliable location awareness in both indoor and outdoor contexts, the advent of fifth-generation mobile communication technology (5G) has enabled expansive coverage and precise positioning services. However, the power received by the signal of interest (SOI) at terminals is notably low. This can lead to significant jamming, whether intentional or unintentional, which can adversely affect positioning receivers. The diagnosis of jamming types, such as classification, assists receivers in spectrum sensing and choosing effective mitigation strategies. Traditional jamming diagnosis methodologies predominantly depend on the expertise of classification experts, often demonstrating a lack of adaptability for diverse tasks. Recently, researchers have begun utilizing convolutional neural networks to re-conceptualize a jamming diagnosis as an image classification issue, thereby augmenting recognition performance. However, in real-world scenarios, the assumptions of independent and homogeneous distributions are frequently violated. This discrepancy between the source and target distributions frequently leads to subpar model performance on the test set or an inability to procure usable evaluation samples during training. In this paper, we introduce LJCD-Net, a deep adversarial migration-based cross-domain jamming generalization diagnostic network. LJCD-Net capitalizes on a fully labeled source domain and multiple unlabeled auxiliary domains to generate shared feature representations with generalization capabilities. Initially, our paper proposes an uncertainty-guided auxiliary domain labeling weighting strategy, which estimates the multi-domain sample uncertainty to re-weight the classification loss and specify the gradient optimization direction. Subsequently, from a probabilistic distribution standpoint, the spatial constraint imposed on the cross-domain global jamming time-frequency feature distribution facilitates the optimization of collaborative objectives. These objectives include minimizing both the source domain classification loss and auxiliary domain classification loss, as well as optimizing the inter-domain marginal probability and conditional probability distribution. Experimental results demonstrate that LJCD-Net enhances the recognition accuracy and confidence compared to five other diagnostic methods. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
25. Navigating intellectual property (IP): A comparative analysis of Australian universities' IP policies.
- Author
-
Jamali, Hamid R.
- Subjects
- *
INTELLECTUAL property , *CULTURAL property , *COMPARATIVE studies , *PUBLIC universities & colleges , *GRADUATE students , *TECHNOLOGY transfer , *INTERNET protocols - Abstract
The push towards research commercialisation at universities has highlighted the importance of intellectual property (IP) policies in fostering innovation and guiding and managing research commercialisation activities. This paper undertakes a content analysis of intellectual property policies of all (37) Australian public universities, focusing on policy objectives, definition of IP, ownership of IP created by different creators, and distribution of net commercialisation revenues. It is found that all universities assert ownership over staff-created IP, particularly when related to employment or utilisation of university resources. For students, policies tend to balance their rights with university interests, with nuanced approaches for different types of student participation, but the focus of most policies was on postgraduate students engaging in research activities. While some policies had clear arrangements for IP created by visitors and affiliates and Indigenous cultural and intellectual property (ICIP), about a quarter of policies did not specify arrangements for these groups. Revenue sharing arrangements vary but generally award something between a third to a half of net revenue to creators, to both acknowledge their contribution and incentivise further innovation. Policies included a broad spectrum of objectives, from protecting and commercialising IP to fostering innovation and societal benefit, reflecting varying strategies across the higher education sector. Policies could benefit from further clarity in certain areas such as the rights of students or other creator groups. Research is needed to assess the effectiveness of these policies and their influence on innovation and commercialisation activities. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
26. On the nature of ceramics technology: from Empedocles to Dawkins.
- Author
-
Heimann, Robert B.
- Abstract
This contribution discusses salient aspects of the development of ceramics technology from its invention to the present, and the role ceramics have played during the cultural development and technological progress of ancient and modern societies. The conjecture is being advanced that the transformation of ceramic production modes from holistic, that is, individualistic processes to prescriptive, that is, cooperative industrially determined technologies had a profound and lasting impact on the social, economic, and cultural fabric of all societies. In addition, the chaotic and thus, nondeterministic interaction of ceramic technology and society, and the transfer of information among potters will be described in terms of the concept of strange attractors as well as sets of self‐normalizing ‘memes’ (ideas) in a Lamarckian and/or Darwinian mode. Such specific ideas drive cultural and, by inference, technological evolution of societies. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
27. Mass Transfer System of a Large Number of Small Objects Based on Conjunction of Triboelectric Nanogenerators and Photo‐Responsive Interface.
- Author
-
Dong, Xuanyi, Yang, Peng, Liu, Zhaoqi, Tao, Xinglin, Qin, Siyao, Hu, Jun, Chu, Xiangcheng, Wang, Zhong Lin, and Chen, Xiangyu
- Subjects
- *
NANOGENERATORS , *INTEGRATED circuits , *NUMBER systems , *TECHNOLOGY transfer , *MINIATURE objects , *MASS transfer , *PHOTOTHERMAL effect - Abstract
Mass transfer technology for large quantities of tiny substances, such as electronic chips and drug particles, plays a crucial role in many industries. This study proposes a transferring system for large quantities of small objects based on the synergism of triboelectric nanogenerators (TENGs) and photo‐responsive dielectric materials. TENG device can provide an output voltage of over 8 kV within a rotation time of 40 ms and the titanium oxide phthalocyanine (TiOPc) photoconductive films are fabricated as the photo‐responsive interface, in order to match the output impedance of TENG. The transfer system enables a maximum adsorption load of 98 mg mm−2, which is enough for handling all common electronics chips/wafers. Under the stimulation of laser light, the conductivity of the TiOPc interface can be increased by two orders of magnitude within 1 ms, which leads to the vanish of the surface potential on the laser spot and the release of patterned or pointed object. This photo‐responsive strategy can achieve both large quantity transfer of tiny objects and highly selective release of the element at designed position. This collaborative mechanism of electrostatic force and photoconductivity provides a different approach for realizing efficient and precise Mass transfer system of semiconductor and chip industry. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
28. Rethinking Technology Transfer in a Colonial Milieu: Railways and Shifting Meanings of Travel in Late Colonial India.
- Author
-
Mukhopadhyay, Aparajita
- Abstract
The article reappraises nature of technology transfer in a colonial context by underlining how the colonised mediated and shaped what was ostensibly an imposition by the imperial administration. This wider point is illustrated by demonstrating the ways in which in the late nineteenth and early twentieth centuries, different groups of Indians used newly introduced railways to reconceptualise meanings of travel by adding new categories of travel while significantly modifying the extant ones. Crucially deviating from both ‘technology as imperialism’ and ‘technology as subversion’ historiographical paradigms, this article argues for a more nuanced appraisal of technology transfer, especially emphasising the role of users in shaping the impact of technology. Examining a diverse range of sources, viz., railway records (Annual Railway Reports and railway passenger statistics), newspaper reports and travelogues and pamphlets written by Indian railway travellers, the article claims Indians not only mediated the impact of trains on travel in late colonial India; but they shaped the outcome of this technology transfer in ways that reveals agency and remarkable involvement with a new mode of transit. In short, the article demonstrates dynamic interaction between imperial policies and responses of the colonised through the lens of technology transfer. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
29. Electronic knowledge books (eK-Books) as a medium to capitalise on and transfer scientific, engineering, operational, technological and craft knowledge.
- Author
-
Baudrit, Cédric, Fernandez, Christophe, Couteaux, Julien, and Ndiaye, Amadou
- Subjects
- *
ELECTRONIC books , *SCIENTIFIC knowledge , *TECHNOLOGY transfer , *KNOWLEDGE transfer , *ENGINEERING - Abstract
The capitalisation on and transfer of technological, engineering and scientific knowledge associated with empirical know-how is an important issue for the sustainability and development of manufacturing. Indeed, certain sectors of industry are facing the increasing ageing of the labour force, recruitment difficulties and high staff turnover, leading to a loss of knowledge and know-how. In a context of numerical and digital transition and the migration of processes to industry 4.0, one of major challenges manufacturers face today is their capacity to build intelligent platforms for acquiring, storing and transferring their know-how and knowledge. It is crucial to create new media and tools for staff training and development capable of capturing knowledge and reusing it to create a project history through expertise and data collection. This paper presents the methodology and guidelines for implementing electronic knowledge books (eK-Books), along with their uses. The eK-Book is a semantic web-based hypertext medium (channel) allowing stakeholders to capitalise on, structure and transfer knowledge by using concept maps, process maps, influence graphs, downloadable documents, web pages and hypermedia knowledge sheets. They are intended for engineers, expert or novice technicians, manufacturers, sector coordinators and plant managers, as well as trainers and learners. They are usable and manageable in all types of environments and with different levels of accessibility. This paper highlights (1) the transfer knowledge capacity of eK-Books and (2) their usability in two agri-food sectors namely (1) the cheese sector with protected designation of origin (PDO) and protected geographical indication (PGI), and (2) the butchery and cold meat sectors. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
30. Narrowband Organic/Inorganic Hybrid Afterglow Materials.
- Author
-
Xia, Wen, Li, Xun, Li, Junbo, Yan, Qianqian, Wang, Guangming, Piao, Xixi, and Zhang, Kaka
- Subjects
- *
TECHNOLOGY transfer , *PHOSPHORESCENCE , *ENERGY transfer , *GAMMA ray bursts , *ORGANIC bases - Abstract
Narrowband afterglow materials display interesting functions in high-quality anti-counterfeiting and multiplexed bioimaging. However, there is still a limited exploration of these afterglow materials, especially for those with a full width at half maxima (FWHM) around 30 nm. Here, we report the fabrication of narrowband organic/inorganic hybrid afterglow materials via energy transfer technology. Coronene (Cor) with a long phosphorescence feature and broad phosphorescence band is selected as the donor for energy transfer, and inorganic quantum dots (QDs) of CdSe/ZnS with a narrowband emission are used as acceptors. Upon doping into the organic matrix, the resultant three-component materials exhibit a narrowband afterglow with an afterglow lifetime of approximately 3.4 s and an FWHM of 31 nm. The afterglow wavelength of the afterglow materials can be controlled by the QDs. This work based on organic/inorganic hybrids provides a facile approach for developing multicolor and narrowband afterglow materials, as well as opens a new way for expanding the features of organic afterglow for multifunctional applications. It is expected to rely on narrowband afterglow emitters to solve the "spectrum congestion" problem of high-density information storage in optical anti-counterfeiting and information encryption. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
31. Wireless Power Transfer for Unmanned Underwater Vehicles: Technologies, Challenges and Applications.
- Author
-
Martínez de Alegría, Iñigo, Rozas Holgado, Iñigo, Ibarra, Edorta, Robles, Eider, and Martín, José Luís
- Subjects
- *
REMOTE submersibles , *WIRELESS power transmission , *TECHNOLOGY transfer , *CARBON emissions , *LEAD , *COST control , *AUTONOMOUS underwater vehicles - Abstract
Unmanned underwater vehicles (UUVs) are key technologies to conduct preventive inspection and maintenance tasks in offshore renewable energy plants. Making such vehicles autonomous would lead to benefits such as improved availability, cost reduction and carbon emission minimization. However, some technological aspects, including the powering of these devices, remain with a long way to go. In this context, underwater wireless power transfer (UWPT) solutions have potential to overcome UUV powering drawbacks. Considering the relevance of this topic for offshore renewable plants, this work aims to provide a comprehensive summary of the state of the art regarding UPWT technologies. A technology intelligence study is conducted by means of a bibliographical survey. Regarding underwater wireless power transfer, the main methods are reviewed, and it is concluded that inductive wireless power transfer (IWPT) technologies have the most potential. These inductive systems are described, and their challenges in underwater environments are presented. A review of the underwater IWPT experiments and applications is conducted, and innovative solutions are listed. Achieving efficient and reliable UWPT technologies is not trivial, but significant progress is identified. Generally, the latest solutions exhibit efficiencies between 88% and 93% in laboratory settings, with power ratings reaching up to 1–3 kW. Based on the assessment, a power transfer within the range of 1 kW appears to be feasible and may be sufficient to operate small UUVs. However, work-class UUVs require at least a tenfold power increase. Thus, although UPWT has advanced significantly, further research is required to industrially establish these technologies. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
32. 外泌体研究态势和前瞻的计量与可视化分析.
- Author
-
郑 颖 and 黄珂敏
- Subjects
- *
QUANTITATIVE research , *INTELLECTUAL property , *MEDICAL research , *RESEARCH & development , *EXOSOMES , *TECHNOLOGY transfer - Abstract
BACKGROUND: Exosomes have become one of the frontiers of biomedical research in recent years because of their promising applications in clinical diagnosis and therapy. OBJECTIVE: To reveal the basic research and technology development trend of exosomes at home and abroad, and provide suggestions for related scientific and technological research and development in China. METHODS: This paper presented a quantitative analysis of the overall research and development situation, the frontier hotspots and future development trends in this research area by means of bibliometric methods and tools. RESULTS AND CONCLUSION: The research and development hotspots in this area have entered a high growth phase with the application of new tools and methods. Many new technologies and products are facing clinical applications and markets with the development of a large number of clinical translation experiments. Comparative analysis at home and abroad reveals that China has made more remarkable achievements in basic research in this field, but there are still weaknesses in the possession of independent intellectual property rights, clinical technology translation, and regulatory system standardization and management, which need to be further strengthened in the future. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
33. Can new urbanization pilot policies promote green technology innovation in cities: Empirical evidence from China.
- Author
-
Cheng, Jing and Chen, Jiarui
- Subjects
- *
CITIES & towns , *ENVIRONMENTAL policy , *GREEN technology , *URBANIZATION , *TECHNOLOGICAL innovations , *POLLUTION , *TECHNOLOGY transfer - Abstract
The development of urbanization has brought new challenges to the ecological environment, and the promotion of green technology innovation and development is widely recognized as an essential method to achieve cities' economic benefits and environmental protection. This paper examines whether the new urbanization pilot policies (NUP) increase green technology innovation (GTI) from both theoretical and empirical perspectives. This paper examines the impact of new urbanization on GTI by analyzing data from 285 cities in China between 2010 and 2021, using the multi-period DID model with the implementation of NUP as an exogenous policy shock. The study results indicate that NUP significantly affects GTI, and the conclusion still holds after the parallel trend test, placebo test, and other robustness tests. Heterogeneity analysis shows that the NUP significantly enhances GTI in low environmental pollution, non-resource-based, Medium-sized, and Central Region cities. The test of moderating effect shows that NUP has a "linkage effect" with the government's environmental attention, financial investment in innovation, and regional talent pooling. The findings of this paper provide empirical evidence and decision-making reference for promoting NUP and sustainable development of cities. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
34. Seventy years of sweet potato [Ipomoea batatas L. (LAM)] research in South Africa.
- Author
-
Laurie, Sunette M., Mulabisana, Julia, Sutherland, Rene, Sivakumar, Dharini, Pofu, Kgabo, Mphela, Whelma M., Truter, Mariette, du Plooy, Ian, Araya, Nadia, Araya, Hintsa, Nyathi, Melvin, Kistnasamy, Ashika, Cloete, Michele, Nkosi, Brightness, Shimelis, Hussein, Laing, Mark D., Malebane, Mmapaseka E., and Bairu, Michael W.
- Subjects
- *
SWEET potatoes , *GENOME-wide association studies , *SEED technology , *WILT diseases , *CROP development , *TECHNOLOGY transfer - Abstract
The 2030 Agenda for Sustainable Development Goals of the United Nations puts forward a transformational vision to cope with food security, nutrition, and health challenges, in which sweet potato can play an important role. Globally, sweet potato production is valued at $53.83 billion. The Agricultural Research Council of South Africa (ARC) sweet potato research and development (R&D) program over the past seven decades delivered 31 genetically improved cultivars via demand‐led breeding, managed the collection and maintenance of 375 accessions, contributed toward the optimization of cultivation practices, developed crop protection and diagnostic services, and provided streamlined seed systems and technology transfer in processing and enterprise development. The ARC's work is part of a large number of interdependent global programs committed to improving livelihoods and nutrition through sweet potato. This review shares and analyses major achievements, highlights unique research contributions achieved through partnerships, and discusses bottlenecks on funding and uptake of technologies. New research imperatives will involve root phenotyping, employing marker‐based technologies, and genome‐wide association studies through new funding received recently. Exploration of the commercialization potential of processed products made from orange‐fleshed sweet potato will be a major focus of the R&D program. Expansion of partnerships, marketing, and financing will be important for future contribution of sweet potato to the economy. Core Ideas: Sweet potato has great potential to address several Sustainable Development Goals of the United Nations.A comprehensive sweet potato research and development program described herein provided technology across the full value chain.Screening methods for wilt disease, nematodes, protein content, virus, and crop development are highlighted.Expansion of partnerships and financing is essential to retain research momentum.Modern technologies must be key in new research imperatives.This article provides important lessons for public breeding efforts. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
35. Analyzing the nexus between Chinese industrial policy and cross-border M&As.
- Author
-
Dong, Zhiyong, Zhu, Zhigan, Song, Dawei, and An, Hongyu
- Subjects
- *
INDUSTRIAL policy , *MERGERS & acquisitions , *ECONOMIC expansion , *BUSINESS planning , *TECHNOLOGY transfer - Abstract
In recent years, as China experiences economic expansion and its corporations become more global, it has notably become a central hub for cross-border mergers and acquisitions (M&A) on the world stage. The Chinese government, in tandem, leverages these international M&A operations to drive industrial transformation and progress in technology. This research investigates the role of China's industrial policies in shaping cross-border M&A activities by examining recent instances. Findings indicate that relaxing financial barriers and applying specific industrial tactics bolster companies' abilities to secure funding, consequently energizing cross-border M&A initiatives. Several firms in these international mergers and acquisitions are intricately connected to political strategies, markedly affecting the formulation of industrial policies. This assertion is corroborated through the analysis of relevant statistical evidence. The study methodically collects and scrutinizes data to quantitatively depict the current landscape and influencing elements of cross-border M&A, thus providing concrete evidence for policy and business strategy formulation. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
36. High‐gain tapered monopulse antenna based on octuple excitation method in diffusion bonding technology at W‐band.
- Author
-
Mahmoud, Adham, Tomura, Takashi, Ettorre, Mauro, González‐Ovejero, David, Sauleau, Ronan, and Hirokawa, Jiro
- Subjects
- *
SEALING (Technology) , *ANTENNAS (Electronics) , *TECHNOLOGY transfer , *MONOPULSE radar , *ANTENNA feeds , *COPPER - Abstract
The authors present the design, fabrication and testing of a W‐band monopulse antenna. This antenna consists of three main building blocks: an array with 48 × 48 slots, a tapered corporate‐feed network and a comparator. The comparator has four input ports to generate sum and difference patterns in orthogonal cardinal planes for monopulse operation. A novel octuple excitation is adopted for the corporate network to achieve a side lobe level lower than −20 dB for the sum patterns and simultaneously reduce drastically the manufacturing complexity. Diffusion bonding technology is used for fabrication. Twenty‐four etched copper sheets with a thickness of 0.2 mm are stacked to realise the prototype. The total size of the antenna is 40.76×40.76×1.51λ03 $40.76\times 40.76\times 1.51{\lambda }_{0}^{3}$, with λ0 being the wavelength at the centre frequency (94 GHz). The antenna presents an isolation better than 12 dB among the input ports in the 84–100 GHz band. The realised measured gain is 40.7 dBi at 94 GHz. The measured 3‐dB gain bandwidth is 17.4%. The difference patterns at 94.0 GHz present null depths of −24.0, −18.0, −17.5, and −17.4 dB, in the E‐, H‐, 45°‐, and 135°‐planes, respectively. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
37. Comprehensive Analysis of Renewable Energy Technologies Adoption in Remote Areas Using the Integrated Delphi-Fuzzy AHP-VIKOR Approach.
- Author
-
Abdul, Daud, Wenqi, Jiang, Tanveer, Arsalan, and Sameeroddin, Mohd.
- Subjects
- *
RENEWABLE energy sources , *CLEAN energy , *INNOVATION adoption , *ANALYTIC hierarchy process , *DELPHI method , *ENVIRONMENTAL quality , *TECHNOLOGY transfer - Abstract
A slew of economic, environmental, and social concerns has pushed policymakers and governments to embrace renewable energy (RE) technologies in order to ensure a sustainable energy future. RE technologies have a beneficial effect on the environment and social well-being. Therefore, this study presents a method for systematically determining and ranking the benefits of adopting RE technologies in remote areas and possible solutions. The present analysis is structured into four distinct levels. The benefits of RE technologies were identified through a comprehensive review of relevant literature. The Delphi technique was employed to reach a consensus and classify the advantages. Fourteen benefits were determined and classified according to seven primary criteria. Furthermore, the Fuzzy Analytic Hierarchy Process was employed to determine the weights and rankings. The Fuzzy VIekriterijumsko KOmpromisno Rangiranje method was ultimately used to evaluate the potential alternatives. The integrated method result significantly reveals that the environmental criteria are the most critical factor, with a weight of (0.1727), and are followed by the quality of energy aspect, with a weight of (0.1617). Moreover, the global weights show that Sustainability is ranked highest, followed by Skill development, then the other sub-benefits within different categories. These two benefits have relative weights of (9.9164%) and (9.4924%), respectively. Furthermore, the most effective solution facilitating local and foreign investors was the most promising among the four recommended alternatives. The quote has proven that it benefits the government and policymakers in deploying RE technologies and resolving energy challenges in remote areas of developing nations like Pakistan. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
38. Striving for Fairness: A Critical Examination of the 'Common but Differentiated Responsibilities and Capabilities' Principle in International Health Law.
- Author
-
Di Lullo, Ludovica
- Subjects
- *
WORLD health , *INTERNATIONAL environmental law , *HUMAN rights , *SUSTAINABLE development , *TECHNOLOGY transfer - Abstract
The 'Common but Differentiated Responsibilities and Respective Capabilities' ('CBDRC') is a traditional yet rather controversial principle of International Law. It stems from the need to establish an equitable approach to global concerns through non-reciprocal obligations. Despite the quasi-universal acceptance of the principle since its first appearance in the 1992 Rio Declaration on Environment and Development, certain legal challenges persist regarding its formal status, the rationale for the differentiation of legal obligations, and its implementation. The CBDRCs principle continues to play a crucial role in the ongoing post-pandemic negotiations aimed at reshaping the international health legal architecture. This article argues that translating the principle of CBDRCs into operational tools for a comprehensive system of pandemic prevention, preparedness and response, could address inequalities between the Global North and the Global South, thus changing the narrative on fairness in international health law. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
39. Combining transfer learning and hyperspectral imaging to identify bruises of pears across different bruise types.
- Author
-
Liu, Dayang, Zhang, Huiting, Lv, Feng, Tao, Yanrong, and Zhu, Liangkuan
- Subjects
- *
ODORS , *SUPPORT vector machines , *TECHNOLOGY transfer - Abstract
Mechanical bruise is one of the most crucial factors affecting the quality of pears, which has a huge influence on postharvest transportation, storage, and sale of pears. To rapidly detect early bruises of pears across different bruise types, hyperspectral imaging technology coupled with transfer learning methods was performed in this study. Two transfer learning methods, that is, transfer component analysis (TCA) and manifold embedded distribution alignment (MEDA), were applied for two tasks (impact bruise → crush bruise, crush bruise → impact bruise). Supporting vector machine (SVM) was set as a baseline to conduct analysis and comparison of the transferability of the models. The result showed that, for task 1 (impact bruise → crush bruise), MEDA and TCA‐SVM model achieved a classification accuracy of 93.33% and 91.11% in target domain, individually. For task 2 (crush bruise →impact bruise), MEDA and TCA‐SVM model achieved an accuracy of 88.89% and 85.19% in target domain, respectively. Both the two models improved the accuracy compared with SVM models (84.44% for task 1; 77.04% for task 2). Overall, the results indicated that transfer learning approaches could perform pear bruise detection across different bruise types. Hyperspectral imaging in combination with transfer learning methods is a promising possibility for the efficient and cost‐saving field detection of fruit bruises among different bruise types. Practical Application: The production and export of pears are faced with problems of mechanical damage due to vibration, collision, impact, and other factors, which cause chemical changes in color, odor, and taste. Sometimes the bruise was too slight to be ignored which would infect with other fruits in the future. In this study, we used hyperspectral imaging combined with transfer learning method could detect these slight bruises caused by different factors. Distinguishing different types of damage can provide a reference for quick judgment of the process causing damage and take prompt measures to reduce economic losses. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
40. Using the lens of assistive technology to develop a technology translation readiness assessment tool (TTRAT)™ to evaluate market readiness.
- Author
-
Zorrilla, Michelle, Ao, Jingning, Terhorst, Lauren, Cohen, Susan K., Goldberg, Mary, and Pearlman, Jonathan
- Subjects
- *
CRONBACH'S alpha , *RESEARCH funding , *RESEARCH methodology evaluation , *TRANSLATIONS , *DESCRIPTIVE statistics , *PROBLEM solving , *ASSISTIVE technology , *EXPERIMENTAL design , *RESEARCH methodology , *PSYCHOMETRICS ,RESEARCH evaluation - Abstract
Assistive Technologies encompass a wide array of products, services, healthcare standards, and the systems that support them. Product/market fit is necessary for a technology to be transferred successfully. Current tools lack variables that are key to technology transfer, and current trainings do not have a validated tool to assess the effectiveness of a training, increasing innovators' readiness for technology transfer. The goal was to develop a tool to evaluate the readiness of a technology by incorporating other models and focusing beyond just commercialization. The development involved five stages: 1. Review of current tools used in technology transfer in academic, government, and industry settings; 2. Development of the draft version of the tool with internal review; 3. Alpha version review and refinement, 4. Content validation of the tool's beta version; 5. Assessment of the readiness tool for reliability and preparedness for wide-use dissemination. The tool was revised and validated to 6 subscales and 25 items. The assistive technology subscale was removed from the final version to eliminate repetitive questions and taking into consideration that the tool could be used across technologies. We developed a flexible assessment tool that looked beyond just commercial success and considered the problem being solved, implications on or input from stakeholders, and sustainability of a technology. The resulting product, the Technology Translation Readiness Assessment Tool (TTRAT)TM, has the potential to be used to evaluate a broad range of technologies and assess the success of training programs. Quality of life can be substantially impacted when an assistive technology does not meet the needs of an end-user. Thus, effective Assistive Technology Tech Transfer (ATTT) is needed. The use of the TTRAT may help to inform NIDILRR and other funding agencies that invest in rehabilitation technology development on the overall readiness of a technology, but also the impact of the funding on technology readiness. The TTRAT may help to educate novice rehabilitation technology innovators on appropriate considerations for not only technology readiness, but also general translation best practices like assembling a diverse team with appropriate skillsets, understanding of the market and its size, and sustainability strategies. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
41. LazyFrog : Advancing Security and Efficiency in Commercial Wireless Charging with Adaptive Frequency Hopping.
- Author
-
Ahn, Sungkyu, Jung, Hyelim, and Park, Ki-Woong
- Subjects
- *
WIRELESS power transmission , *INFRASTRUCTURE (Economics) , *TECHNOLOGY transfer , *RADIO technology , *POWER resources , *ELECTRONIC equipment , *POWER transmission - Abstract
With the proliferation of electronic devices and electricity-based mobility solutions, the significance of wireless power transfer technology has increased substantially. However, ensuring secure and reliable power transmission to authorized users remains a significant challenge. Addressing this complex issue requires an integrated approach that balances efficiency, stability, and security considerations. While current efforts primarily focus on improving charging efficiency and user convenience, integrating robust security measures into wireless charging infrastructure is challenging due to its inherently open nature and susceptibility to external interference. Technical advancements are required to strengthen the security of the wireless charging infrastructure; however, these should be balanced with power loss management. This study tackles two core issues: the increasing hardware requirements for billing system authentication protocols and the interception of wireless charging signals by unauthorized users, leading to power theft and subsequent losses. To address these challenges, we propose a mechanism termed "LazyFrog". This mechanism dynamically adjusts the frequency hopping schedule, activating frequency changes only in response to detected threats during remote charging or upon identifying unauthorized access attempts. The proposed mechanism compares the expected power reception at the device with the actual power supplied by the charging station, enabling the detection of abnormal power losses. By minimizing unnecessary frequency changes and optimizing energy consumption, LazyFrog reduces hardware requirements. Moreover, we have implemented a relative distance estimation mechanism to facilitate efficient power transfer as wireless devices move within the charging environment. With these features, LazyFrog demonstrates a secure, flexible, and energy-efficient wireless charging system ready for practical application. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
42. The role of defence countertrade in Chinese geoeconomic diplomacy.
- Author
-
Matthews, Ron and Anicetti, Jonata
- Abstract
Since the launch of the Belt and Road Initiative, many studies have analysed Beijing’s geoeconomic diplomacy. However, analysis has principally focused on the investment and financial aspects, ignoring the strategic dimensions of military technology exports and the means of financing them. This paper seeks to fill this scholarship gap by critically exploring Chinese defence countertrade deals, especially barter and offset, as a component of geoeconomic diplomacy. The findings suggest that while China’s geoeconomic diplomacy reflects traditional Western mercantilist goals, it also displays uniquely Chinese characteristics. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
43. Metalcasting Industry Research.
- Subjects
- *
FOUNDING , *TECHNOLOGY transfer , *DENTAL metallurgy , *CAREER development , *ALUMINUM castings , *FOUNDRY sand , *SAND casting - Abstract
The International Journal of Metalcasting provides information on the funding and involvement of the American Foundry Society (AFS) in metalcasting research projects. AFS collaborates with government funding, industry contributions, and other means to support research in the metalcasting industry. They are currently involved in partnerships such as the American Metalcasting Consortium (AMC) funded by the Defense Logistics Agency (DLA). AFS also funds research projects on various topics including virtual knowledge transfer platforms, cost-effective fast response and sustainability for critical castings, and refining austenite in gray irons. The text also mentions resources like the AFS Casting Alloy Data Search and the Peters-Robison AFS Metalcasting Library, as well as upcoming conferences and workshops organized by AFS. [Extracted from the article]
- Published
- 2024
- Full Text
- View/download PDF
44. INSTITUTIONAL FRAMEWORKS THAT GUIDE RESEARCH INTEGRITY AND SECURITY TOWARDS PROTECTION OF IP AND MANAGEMENT OF TECHNOLOGY TRANSFER IN UNIVERSITIES IN KENYA.
- Author
-
Musembi, S., Oduor, R., and Kimiywe, J.
- Subjects
- *
RESEARCH integrity , *TECHNOLOGY transfer , *INTELLECTUAL property theft - Abstract
This article discusses the institutional frameworks that guide research integrity and security in universities in Kenya, with a focus on the protection of intellectual property (IP) and the management of technology transfer. The expansion of Kenya's higher education system has led to an increased emphasis on universities contributing to solving social and environmental challenges and generating economically relevant knowledge. However, universities face challenges in ensuring research integrity and security, particularly in STEM subjects and commercially sensitive research areas. The article highlights the need for universities to establish research compliance structures and implement policies and guidelines to protect IP and manage technology transfer. Recommendations include sensitizing faculty and administration on potential risks, providing effective tools for research administrators, and implementing research integrity and security education and training programs. The study was approved by the Kenyatta University Ethics Review Committee and supported by CRDF Global and CNS. [Extracted from the article]
- Published
- 2024
- Full Text
- View/download PDF
45. Evaluation index system of science and technology innovation think tank talents based on competency model.
- Author
-
Qi, Shaobo
- Subjects
- *
RESEARCH institutes , *SYSTEMS theory , *HOUSE construction , *TECHNOLOGY transfer , *TECHNOLOGICAL innovations ,ECONOMIC conditions in China - Abstract
As China's economy progresses towards high-quality development, the construction of science and technology think tanks, with talent construction as the key, has become an important supporting force and occupies a unique position in the national innovation system. In recent years, with the rapid expansion of the number of think tank talents, how to evaluate and manage think tank talents has become a key factor in the development of think tank influence and competitiveness. Based on the experience of talent team construction at home and abroad, Taking the typical science and technology innovation think tanks of Henan Province as an example, this paper analyzes the current situation and status quo of science and technology innovation think tank talents, and finds problems in the talents, Summarize the factors that affect the talent construction and development of science and technology innovation think tanks, From the perspective of six dimensions of competency model, four first-level indicators of talent quantity, talent quality, talent ability and talent contribution of science and technology innovation think tank and 16 subordinate second-level indicators are constructed for talent evaluation of think tank. Ahp is adopted to set questionnaires and collect data with Likert5-level scale, and yaahp software is used to verify the weight verification evaluation effect. Invite experts in the field to score the evaluation indicators. The research results show that the talent evaluation index of science and technology innovation think tank based on competency model pays more attention to the standardization, integration and systematization of the talent evaluation of the think tank, and the system is scientific and reasonable. It can provide reference and reference for promoting the construction, evaluation and development management of scientific and technological innovation think tanks. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
46. Technology Transfer from China to Kenya for Transport Infrastructure: The Case of International Trunk Roads.
- Author
-
MULAKU, LEMMY NYONGESA, SABALA, KIZITO, and KAMAU, PAUL
- Subjects
- *
TECHNOLOGY transfer , *EXTERNALITIES , *CLIMATE change , *AGRICULTURAL economics - Abstract
Literature on technology transfer to Africa is dominated by studies on agribusiness, military technology, information and communication technology, energy, climate change, health, and manufacturing, while it is scanty on others like transport infrastructure. In this article, we reviewed literature and carried out key informant interviews to collect data on technology transfer for Chinese-built roads in Kenya. Our objective was to examine the extent of technology transfer from Chinese multinational corporations to Kenyan institutions and organizations. We established that there was little technology transfer mostly because of Kenya's internal obstacles such as inadequate absorptive capacity, weak competition culture, and weak legal and institutional frameworks on technology transfer. Multinational corporations transferred technology primarily to fulfil their commercial objectives and to meet the domestic labour training requirements. The technology transferred was not sufficient to simulate innovation and technology development in Kenya. We recommend reviewing Kenya's legal and institutional frameworks on international technology transfer in order to improve the participation in and enforcement of technology transfer by government institutions. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
47. Denoising Diffusion Probabilistic Model with Adversarial Learning for Remote Sensing Super-Resolution.
- Author
-
Sui, Jialu, Wu, Qianqian, and Pun, Man-On
- Subjects
- *
REMOTE sensing , *DISTANCE education , *HIGH resolution imaging , *LEARNING strategies , *SIGNAL-to-noise ratio , *IMAGE encryption , *TECHNOLOGY transfer - Abstract
Single Image Super-Resolution (SISR) for image enhancement enables the generation of high spatial resolution in Remote Sensing (RS) images without incurring additional costs. This approach offers a practical solution to obtain high-resolution RS images, addressing challenges posed by the expense of acquisition equipment and unpredictable weather conditions. To address the over-smoothing of the previous SISR models, the diffusion model has been incorporated into RS SISR to generate Super-Resolution (SR) images with enhanced textural details. In this paper, we propose a Diffusion model with Adversarial Learning Strategy (DiffALS) to refine the generative capability of the diffusion model. DiffALS integrates an additional Noise Discriminator (ND) into the training process, employing an adversarial learning strategy on the data distribution learning. This ND guides noise prediction by considering the general correspondence between the noisy image in each step, thereby enhancing the diversity of generated data and the detailed texture prediction of the diffusion model. Furthermore, considering that the diffusion model may exhibit suboptimal performance on traditional pixel-level metrics such as Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity (SSIM), we showcase the effectiveness of DiffALS through downstream semantic segmentation applications. Extensive experiments demonstrate that the proposed model achieves remarkable accuracy and notable visual enhancements. Compared to other state-of-the-art methods, our model establishes an improvement of 189 for Fréchet Inception Distance (FID) and 0.002 for Learned Perceptual Image Patch Similarity (LPIPS) in a SR dataset, namely Alsat, and achieves improvements of 0.4%, 0.3%, and 0.2% for F1 score, MIoU, and Accuracy, respectively, in a segmentation dataset, namely Vaihingen. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
48. Technology Transfer of a Validated RP-HPLC Method for the Simultaneous Estimation of Andrographolide and Paclitaxel in Application to Pharmaceutical Nanoformulation.
- Author
-
Kumar, Abhiram, Rana, Rafquat, Saklani, Ravi, Kumar, Madhaw, Yadav, Pavan Kumar, Tiwari, Amrendra, and Chourasia, Manish Kumar
- Subjects
- *
PACLITAXEL , *TECHNOLOGY transfer , *HYDROCHLOROTHIAZIDE , *GRADIENT elution (Chromatography) , *HIGH performance liquid chromatography , *DOSAGE forms of drugs , *RF values (Chromatography) - Abstract
Many analytical methods are reported for simultaneous estimation of pharmaceutical dosages form. However, only a few are reproducible at an industrial scale. The proposed research aims to establish a technology transfer (TT) protocol between two laboratories (Lab-X, originator) with binary and (Lab-Y, receiver) with quaternary high-performance liquid chromatography (HPLC) system. Thus, utilizing reverse-phase HPLC (RP-HPLC), a robust, sensitive and repeatable analytical method has been developed, validated and TT between two laboratories for simultaneous estimation of Andrographolide (AG) and Paclitaxel (PTX). The method has been developed on a Phenomenex Luna C18 column (150 x 4.6, 5) sustained at 40°C and validated under the International Conference on Harmonisation (ICH) Q2 (R1) regulatory guideline and TT USP chapter 1224. The mobile phase consisted of MilliQ (pH = 3) and a combination of acetonitrile and methanol (1:1) in the ratio 50:50 with a flow rate of 0.45 mL/min, linear gradient elution in both labs. The AG and PTX were detected on the PDA detector at 224 and 227 nm wavelength with retention time of 4.5 ± 0.34 and 8.2 ± 0.02 min and limit of detection was found 0.028 ± 0.004 μg/mL, and 0.028 ± 0.0007 μg/mL, whereas limit of quantification as 0.086 ± 0.011 μg/mL and 0.088 ± 0.0014 μg/mL respectively in both labs. Throughout, this approach we have proved that proposed method is repeatable in both labs, and it can be used to quantify AG and PTX in developed pharmaceutical nano-formulations. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
49. Do universities matter for the location of foreign R&D?
- Author
-
Añón Higón, Dolores and Díez-Minguela, Alfonso
- Subjects
- *
TECHNOLOGY transfer , *KNOWLEDGE transfer , *HIGHER education , *UNIVERSITIES & colleges , *RESEARCH & development - Abstract
This article explores the extent to which the regional higher education system (HES) influences the location of foreign research and development (R&D). To do so, we use a dataset with information on the location choices of new foreign R&D establishments within Spain from 2005 to 2013. Similarly, we use a multiple measure of the three university missions, distinguishing between research capacity training, scientific research, and technology transfer. We find that the probability of a foreign R&D establishment being located in a region is positively affected by the strength of the region's HES missions, and more specifically by the quality of its scientific research, while its research training capacity and knowledge transfer activities do not seem to play a significant role. Moreover, the strength of the research mission has a positive influence on the location choice of foreign units conducting research activities but is weak to explain the location of those performing development activities. JEL CLASSIFICATION F21; F23; O32 [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
50. Tackling Infectious Diseases with Rapid Molecular Diagnosis and Innovative Prevention.
- Author
-
Omar, Rabeea F., Boissinot, Maurice, Huletsky, Ann, and Bergeron, Michel G.
- Subjects
- *
COMMUNICABLE diseases , *MOLECULAR diagnosis , *RAPID diagnostic tests , *BIOENGINEERING , *MEDICAL practice , *EMERGING infectious diseases - Abstract
Infectious diseases (IDs) are a leading cause of death. The diversity and adaptability of microbes represent a continuing risk to health. Combining vision with passion, our transdisciplinary medical research team has been focussing its work on the better management of infectious diseases for saving human lives over the past five decades through medical discoveries and innovations that helped change the practice of medicine. The team used a multiple-faceted and integrated approach to control infectious diseases through fundamental discoveries and by developing innovative prevention tools and rapid molecular diagnostic tests to fulfill the various unmet needs of patients and health professionals in the field of ID. In this article, as objectives, we put in context two main research areas of ID management: innovative infection prevention that is woman-controlled, and the rapid molecular diagnosis of infection and resistance. We also explain how our transdisciplinary approach encompassing specialists from diverse fields ranging from biology to engineering was instrumental in achieving success. Furthermore, we discuss our vision of the future for translational research to better tackle IDs. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.