Search

Lactic acid has gained considerable attention globally due to its multi-purpose application. Commercial lactic acid production uses the fungal species Rhizopus oryzae, which produces other organic acids. A crucial point of effective fungal organic acid production is matching the fungal strains' requirements, where the carbon source plays a major role. The highest production rate is achieved when glucose is used as a carbon source. Alternatively, we can apply carbon-rich agricultural residues as carbon sources. Using agricultural waste for lactic acid production provides a sustainable and cost-effective feedstock but also helps to reduce greenhouse gas emissions by diverting waste from landfills and decreasing reliance on fossil fuels. Moreover, polylactic acid (PLA) produced from lactic acid monomers can occur in numerous agricultural applications. We should delve deeper into sustainable methods of using carbon residues to recycle waste, foster the circular economy, and advance sustainable agriculture. Therefore, there is a need for further research on the commercial use of agricultural and food industry wastes for lactic acid production.

Abstract The behavior of 7 polychlorinated biphenyls (PCBs) in agricultural Chernozem and Fluvisol soils from the Czech Republic planted with radishes, onions, and carrots was studied. Only the total biomass yield of carrots was significantly reduced (P

Abstract Background Phytoextraction belongs to environmentally well-accepted remediation technologies to remove metals from contaminated soils. Due to long-time requirement, sufficient data for proper phytoextraction evaluation are missing. Four clones of fast-growing trees: two willow species (S1), Salix viminalis L. (Salix schwerinii E.L.Wolf × S. viminalis) × S. viminalis) and (S2)—Salix smithiana (Salix × smithiana Willd.), and two poplar clones (P1), Populus Max-4 (Populus nigra L. × Populus maximowiczii A. Henry) and (P2) Wolterson (P. nigra L.) were cultivated under field conditions at medium-to-high Cd and Pb, and low Zn soil contamination to assess trees’ long-term ability of biomass production and removal of potentially toxic elements (PTEs). The biomass yield and PTE uptake were measured during 8 years of regular growth under three rotation lengths: four harvests following 2-year periods (4 × 2y), two harvests in 4-year periods (2 × 4y), and one harvest representing 8 years of growth (1 × 8y). Results In most cases, the highest annual dry biomass yield was achieved with a 2 × 4y rotation (P1 = 20.9 t ha−1 y−1, S2 = 18.4 t ha−1y−1), and the yield decreased in order 2 × 4y > 1 × 8y > 4 × 2y of harvesting periods. Only clone S1 showed a different pattern. The differences in biomass yield substantially affected the PTE phytoextraction. The greatest amount of Cd and Zn was removed by willow S2, with the highest biomass yield, and the strongest ability to accumulate PTEs. With 2 × 4y rotation, S2 removed a substantial amount of Cd (9.07%) and Zn (3.43%) from the topsoil horizon (0–20 cm) and 5.62% Cd and 2.04% Zn from horizon 20–40 cm; phytoextraction rate was slightly lower for 1 × 8y rotation. The poplar P1 removed the most Pb in the 1 × 8y rotation, but the overall Pb phytoextraction was negligible. The results indicated that lignin and cellulose contents increased, and hemicellulose content decreased with increased concentrations of Cd, Pb and Zn in poplars wood. Conclusions The data confirmed that phytoextraction over longer harvest periods offered promising results for removing Cd from medium- to high-level contaminated soils; however, the ability of Pb removal was extremely low. The longer harvest period should be more economically feasible. Graphical Abstract

IntroductionSelenium (Se) deficiency, stemming from malnutrition in humans and animals, has the potential to disrupt many vital physiological processes, particularly those reliant on specific selenoproteins. Agronomic biofortification of crops through the application of Se-containing sprays provides an efficient method to enhance the Se content in the harvested biomass. An optimal candidate for systematic enrichment, guaranteeing a broad trophic impact, must meet several criteria: (i) efficient accumulation of Se without compromising crop yield, (ii) effective conversion of mineral Se fertilizer into usable organically bound Se forms (Seorg), (iii) acceptance of a Se-enriched crop as livestock feed, and (iv), interest from the food processing industry in utilization of Se-enriched outputs. Hence, priority should be given to high-protein leafy crops, such as soybean.MethodsA three-year study in the Czech Republic was conducted to investigate the response of field-grown soybean plants to foliar application of Na2SeO4 solutions (0, 15, 40, and 100 g/ha Se); measured outcomes included crop yield, Se distribution in aboveground biomass, and the chemical speciation of Se in seeds.Results and DiscussionSeed yield was unaffected by applied SeO42-, with Se content reaching levels as high as 16.2 mg/kg. The relationship between SeO42-dose and Se content in seeds followed a linear regression model. Notably, the soybeans demonstrated an impressive 73% average recovery of Se in seeds. Selenomethionine was identified as the predominant species of Se in enzymatic hydrolysates of soybean, constituting up to 95% of Seorg in seeds. Minor Se species, such as selenocystine, selenite, and selenate, were also detected. The timing of Se spraying influenced both plant SeO42- biotransformation and total content in seeds, emphasizing the critical importance of optimizing the biofortification protocol. Future research should explore the economic viability, long-term ecological sustainability, and the broad nutritional implications of incorporating Se-enriched soybeans into food for humans and animals.

Biostimulants (Bio-effectors, BEs) comprise plant growth-promoting microorganisms and active natural substances that promote plant nutrient-acquisition, stress resilience, growth, crop quality and yield. Unfortunately, the effectiveness of BEs, particularly under field conditions, appears highly variable and poorly quantified. Using random model meta-analyses tools, we summarize the effects of 107 BE treatments on the performance of major crops, mainly conducted within the EU-funded project BIOFECTOR with a focus on phosphorus (P) nutrition, over five years. Our analyses comprised 94 controlled pot and 47 field experiments under different geoclimatic conditions, with variable stress levels across European countries and Israel. The results show an average growth/yield increase by 9.3% (n=945), with substantial differences between crops (tomato > maize > wheat) and growth conditions (controlled nursery + field (Seed germination and nursery under controlled conditions and young plants transplanted to the field) > controlled > field). Average crop growth responses were independent of BE type, P fertilizer type, soil pH and plant-available soil P (water-P, Olsen-P or Calcium acetate lactate-P). BE effectiveness profited from manure and other organic fertilizers, increasing soil pH and presence of abiotic stresses (cold, drought/heat or salinity). Systematic meta-studies based on published literature commonly face the inherent problem of publication bias where the most suspected form is the selective publication of statistically significant results. In this meta-analysis, however, the results obtained from all experiments within the project are included. Therefore, it is free of publication bias. In contrast to reviews of published literature, our unique study design is based on a common standardized protocol which applies to all experiments conducted within the project to reduce sources of variability. Based on data of crop growth, yield and P acquisition, we conclude that application of BEs can save fertilizer resources in the future, but the efficiency of BE application depends on cropping systems and environments.

Background: The total suspended particles (TSPs) and selected risk element contents were determined in two medium-sized cities, Litvínov and Sokolov (both in North Bohemia, Czech Republic), where the environment is adversely affected by opencast brown coal mining, coal-related industries, and the petrochemical industry. Methods: TSP samples were collected monthly for three years. Results and Discussion: The results showed significant (p < 0.05) differences in the TSP deposition in different seasons of the year, with the highest values in spring, followed by summer, and the lowest in autumn and winter. This is most likely due to increased coal mining activity in the spring and summer. The amount of the elements associated with the TSP showed mostly a similar pattern. The potential risk of these elements for human health was assessed as the average daily dose (ADD) for ingestion of the individual elements and subsequently calculated hazard quotients (HQ). Elevated oral ADD levels were recorded, especially for children. Among the risk elements, arsenic (As) and lead (Pb) were identified as the most hazardous. Conclusions: The results indicated that the TSP-related risk elements do not represent a serious health risk, but many questions concerning the sources of elements in the area and their bioaccessibility remain open for further research.

The Czech Republic has diverse soil conditions, which cause notable differences in crop water balance (WB). To assess the long-term crop WB and crop water stress (CWS) intensity in rainfed conditions, four conventional eight- and ten-year crop rotations (CRs) with perennial forage (alfalfa), cereals, oilseeds, root crops and legumes were proposed for a heterogeneous lowland soil region (six texture classes) in eastern Bohemia. Two of the CRs were selected irrespective of the WB (eight-year, C-8; ten-year, C-10), and the other two were designated according to soil water resources and crop water requirements (CWRs) as water-saving (W-S) and water-demanding (W-D) for this region. All CRs had a negative WB on average (i.e., CWRs exceeded the available water resources), with varying degrees of CWS (categories 1 (low) to 4 (high)). The W-S CR reduced the WB deficit relative to the other CRs by omitting maize, sunflower and sugar beet and including sorghum, and expanded the proportion of the area not affected by CWS (categories 1–2) to 33% for predominantly loamy soils. In contrast, categories 1–2 in the C-8, C-10 and W-D CRs represented only 15%, 14% and 7% of the area, respectively. Other areas were significantly affected by CWS (categories 3–4) and showed a high risk of yield reduction. These results may help in implementing sustainable farming systems that consider environmental perspectives related to agricultural water use in Central Europe.

This review focuses on the behaviour of four psychoactive compounds (carbamazepine, tramadol, sertraline and citalopram) in the environment. The review presents how they may directly affect freshwater systems, soils and living organisms and to which extent. The transformation of these very stable compounds in soils were controlled by oxidation, demethylation, decarboxylation and hydroxylation. Sorption to organic matter and clay particles controlled their mobility. Despite their expected sorption in soils, sediments and sludge, all compounds can be taken up by plants and by fish. In plants, all compounds and several of their metabolites were found in the leaves, indicating the mobility and transformation of the compounds within the plant systems. Factors that control the compounds mobility in plants were found to be the pH of soils and the xylem flow. As for fish, many of the compounds were found in the brain and muscles of fish, some of which, depending on the species, affected the behaviour of the fish. The implications of these compounds so widely present in the environment indicate the need for certain measures to be put into place to prevent these compounds from continuously entering plant and animal systems.

Growing evidence underscores the role of nutrients and fertigation systems in soilless production, influencing medicinal cannabis biomass and secondary metabolite content. This study delves into the impact of enhanced nutrient regimes on the ‘ionome’ and its ramifications for biomass and cannabinoid production in medicinal cannabis, comparing two distinct fertigation systems: recirculation and drain-to-waste. Notably, we assess the optimal harvest time for maximizing profitability. In comparing the experimental variant with elevated levels of phosphorus (P), potassium (K), and iron (Fe) in the nutrient solution to the control variant, we observe distinct patterns in element composition across stems, leaves, and flowers, with significant differences between fertigation systems. Total nitrogen content was determined through the Kjeldahl method. Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma optical emission spectrometry (ICP-OES) were employed for elemental analysis. Cannabinoid identification and quantification used high-performance liquid chromatography with a diode-array detector (HPLC/DAD). Followed statistical analyses included ANOVA and Tukey’s HSD test. Although the augmented nutrient regimen does not substantially increase plant biomass, interesting differences emerge between the two fertigation systems. The recirculation fertigation system proves more profitable during the recommended harvest period. Nonetheless, the altered nutrient regime does not yield statistically significant differences in final inflorescence harvest mass or cannabinoid concentrations in medicinal cannabis. The choice of fertigation system influences the quantity and quality of harvested inflorescence. To optimize the balance between the dry biomass yield of flowers and cannabinoid concentration, primarily total THC yield (sum of tetrahydrocannabinolic acid, Δ9-tetrahydrocannabinol, and Δ8-tetrahydrocannabinol), we propose the 11th week of cultivation as the suitable harvest time for the recirculation system. Importantly, the recirculation system consistently outperformed the drain-to-waste system, especially after the ninth week, resulting in significantly higher total THC yields. Enriched nutrition, when compared with control, increased THC yield up to 50.7%, with a remarkable 182% surge in the recirculation system when compared with the drain-to-waste system.

The effect of soil selenate application to two different soils (Phaeozem and Cambisol) on biomass yield and selenium (Se) uptake by spring wheat (Triticum aestivum L.) was investigated in a pot experiment. Additionally, organic amendment (fugate, i.e. liquid by-product from the biogas plant) was applied to assess (i) the effect of organic matter on the bioavailability of Se and (ii) the fugate (containing 2.3 mg/kg of Se) as a potential source of Se for plants. Selenium was applied at two levels: 6.4 µg/kg (Se1) and 32 µg/kg (Se2) of soil. The efficiency of biofortification and the distribution of selenium within individual plant compartments were assessed in this case. The highest Se contents in the grain were achieved in the treatments receiving NPK fertiliser together with selenate, 455 µg/kg (Se1) and 2 721 µg/kg (Se2) when wheat was planted in Phaeozem. Fugate in co-application with selenate significantly reduced Se content in wheat plants as compared to treatments enriched solely with selenate. The lower Se contents in the wheat plants growing in Phaeozem were due to the biodilution effect, whereas in Cambisol, the decrease in wheat Se uptake was not clearly driven by a particular factor.

Excess potentially toxic elements (PTEs), including arsenic (As), cadmium (Cd), lead (Pb), and zinc (Zn), above permissible limits in the environment, have detrimental effects on trophic levels. Hence, imperative to devise advertent measures to address this situation, especially in the soil ecosystem: the major reservoir of many PTEs. Using aerial plant parts (shoot) to accumulate As, Cd, Pb, and Zn - hyperaccumulators are considered a permanent approach to PTE removal from soils. This communication expatiated the principles that govern the hyperaccumulation of plants growing on As, Cd, Pb, and Zn-contaminated soils. The contribution of soil microbial communities during hyperaccumulation is well-elaborated to support the preference for this remediation approach. The study confirms a flow direction involving PTE uptake–translocation–tolerance–detoxification by hyperaccumulators. Rhizosphere microbes exhibit a direct preference for specific hyperaccumulators, which is associated with root exudations, while the resultant formation of chelates and solubility of PTEs, with soil physicochemical properties, including pH and redox potential, promote uptake. Different compartments of plants possess specialized transporter proteins and gene expressions capable of influx and efflux of PTEs by hyperaccumulators. After PTE uptake, many hyperaccumulators undergo cellular secretion of chelates supported by enzymatic catalysis and high transport systems with the ability to form complexes as tolerance and detoxification mechanisms. The benefits of combining hyperaccumulators with beneficial microbes such as endophytes and other rhizosphere microbes for PTE removal from soils are vital in enhancing plant survival and growth, minimizing metal toxicity, and supplying nutrients. Inoculation of suitable rhizosphere microbes can promote efficient cleaning of PTEs contaminated sites utilizing hyperaccumulator plants.

Bracken fern (Pteridium aquilinum (L.) Kuhn) is ubiquitous and acts as a cosmopolitan weed in pastures and similar environments. Despite its historical uses, it presents risks due to toxicity. This study, conducted in the second half of 2023, aimed to assess the environmental and health hazards of P. aquilinum, primarily focusing on its carcinogenic compound, ptaquiloside. The literature was comprehensively reviewed using diverse databases, including PubMed, Web of Science, Scopus, and Google Scholar. Information was synthesized from original research articles, meta-analyses, systematic reviews, and relevant animal studies. Animals grazing on bracken fern face annual production losses due to toxin exposure. The substantial impact on biodiversity, animal health, and human well-being arises from the presence of ptaquiloside and related compounds in milk, meat, and water, along with the increasing global prevalence of P. aquilinum and its swift colonization in acidic soil and fire-damaged areas. The objectives were to identify major bioactive compounds and explore their effects at molecular, cellular, pathological, and population levels. Various cooking techniques were considered to mitigate toxin exposure, although complete elimination remains unattainable. Therefore, the findings emphasize the need for cautious consumption. In conclusion, continued research is necessary to better understand and manage its environmental and health implications.

The use of cannabis for medicinal purposes dates back well before the era of modern medicine, but in recent years research into the use of medical cannabis in the medical and pharmaceutical sciences has grown significantly. In European countries, most cannabis plants have been and still are grown for industrial purposes. For this reason, hemp cultivation technology is relatively well researched, while little is known about the key factors affecting cannabis cultivation for medical purposes. The active substances of cannabis plant targeted by this review are called phytocannabinoids. The biosynthesis of phytocannabinoids is relatively well understood, but the specific environmental factors that influence the type and number of phytocannabinoids have been much less studied. Indoor or greenhouse cultivation, which uses automated lighting, ventilation, irrigation systems and complex plant nutrition has become much more sophisticated and appears to be the most effective method for producing medical cannabis. There are many different cultivation systems for cannabis plants, but one of the essential elements of the process is an optimal plant nutrition and selection of fertilisers to achieve it. This review summarises the existing knowledge about phytocannabinoid biosynthesis and the conditions suitable for growing plants as sources of medical cannabis. This review also attempts to delineate how nutrient type and bioavailability influences the synthesis and accumulation of specific phytocannabinoids based on contemporary knowledge of the topic.

Abstract This study aimed on the increasing nitrogen use efficiency (NUE) of maize via the use of high temperature produced biochar (700 °C). Maize was grown to maturity on two contrasting soils (acidic Cambisol and neutral Chernozem) in pots with a treatment of biochar co-applied with ammonium sulphate stabilised by a nitrification inhibitor (3,4-dimethylpyrazole-phosphate, DMPP) or un-stabilised. The combination of biochar with ammonium sulphate containing DMPP increased maize biomass yield up to 14%, N uptake up to 34% and NUE up to 13.7% compared to the sole application of ammonium sulphate containing DMPP. However, the combination of biochar with un-stabilised ammonium sulphate (without DMPP) had a soil-specific influence and increased maize biomass only by 3.8%, N uptake by 27% and NUE by 11% only in acidic Cambisol. Further, the biochar was able to increase the uptake of phosphorus (P) and potassium (K) in both stabilised and un-stabilised treatments of ammonium sulphate. Generally, this study demonstrated a superior effect from the combined application of biochar with ammonium sulphate containing DMPP, which improved NUE, uptake of P, K and increased maize biomass yield. Such a combination may lead to higher efficiency of fertilisation practices and reduce the amount of N fertiliser to be applied.

Pyrolysis is a promising technology for sewage sludge (SS) treatment providing several improvements of SS properties for soil application. However, information on the influence of pyrolytic temperature on the availability of nutrients in resulting biochar (BC) is limited. In this study, anaerobically stabilised SS was pyrolysed in a laboratory fixed-bed reactor at 220, 320, 420, 520, and 620 °C for 30 min in the N2 atmosphere. Pyrolysis resulted in a higher total content of all studied nutrients in BCs. Aromaticity and hydrophobicity of BCs increased with increasing temperatures while solubility decreased. Relative availability (% from total content) of nutrients in BCs was in order: Ca > Mg ~ K > S > P. Pyrolysis at 220 °C produced acidic BC with a higher content of acetic acid-extractable nutrients compared to non-pyrolysed control. An increment in pH and a significant drop in the content of available Ca, Mg, K and S were found at temperature 320 °C. Pyrolysis at 320 °C increased the content of available P by 28 % compared to non-pyrolysed SS. At the temperature of 420 °C and higher, available contents of all studied nutrients were lower than in non-pyrolysed SS.

There is growing evidence to support the involvement of nutrients and biostimulants in plant secondary metabolism. Therefore, this study evaluated the potential of amino acid-based supplements that can influence different hydroponic nutrient cycles (systems) to enhance the cannabinoid and terpene profiles of medical cannabis plants. The results demonstrate that amino acid biostimulation significantly affected ion levels in different plant tissues (the “ionome”), increasing nitrogen and sulfur content but reducing calcium and iron content in both nutrient cycles. A significantly higher accumulation of nitrogen and sulfur was observed during the recirculation cycle, but the calcium level was lower in the whole plant. Medical cannabis plants in the drain-to-waste cycle matured 4 weeks earlier, but at the expense of a 196% lower maximum tetrahydrocannabinolic acid yield from flowers and a significantly lower concentration of monoterpene compounds than in the recirculation cycle. The amino acid treatments reduced the cannabinolic acid content in flowers by 44% compared to control in both nutritional cycles and increased the monoterpene content (limonene) up to 81% in the recirculation cycle and up to 123% in the drain-to-waste cycle; β-myrcene content was increased up to 139% in the recirculation cycle and up to 167% in the drain-to-waste cycle. Our results suggest that amino acid biostimulant supplements may help standardize the content of secondary metabolites in medical cannabis. Further experiments are needed to identify the optimal nutrient dosage and method of administration for various cannabis chemotypes grown in different media.

Plant-based nootropics are a diverse group of natural drugs that can improve cognitive abilities through various physiological mechanisms, especially in cases where these functions are weakened or impaired. In many cases, the nootropics enhance erythrocyte plasticity and inhibit aggregation, which improves the blood’s rheological properties and increases its flow to the brain. Many of these formulations possess antioxidant activity that protects brain tissue from neurotoxicity and improves the brain’s oxygen supply. They can induce the synthesis of neuronal proteins, nucleic acids, and phospholipids for constructing and repairing neurohormonal membranes. These natural compounds can potentially be present in a great variety of herbs, shrubs, and even some trees and vines. The plant species reviewed here were selected based on the availability of verifiable experimental data and clinical trials investigating potential nootropic effects. Original research articles, relevant animal studies, meta-analyses, systematic reviews, and clinical trials were included in this review. Selected representatives of this heterogeneous group included Bacopa monnieri (L.) Wettst., Centella asiatica (L.) Urban, Eleutherococcus senticosus (Rupr. & Maxim.) Maxim., Ginkgo biloba L., Lepidium meyenii Walp., Panax ginseng C.A. Meyer, Paullinia cupana Kunth, Rhodiola rosea L., Schisandra chinensis (Turcz.) Baill., and Withania somnifera (L.) Dunal. The species are depicted and described, together with their active components and nootropic effects, and evidence of their efficacy is presented. The study provides brief descriptions of the representative species, their occurrence, history, and the chemical composition of the principle medicinal compounds, with uses, indications, experimental treatments, dosages, possible side effects, and contraindications. Most plant nootropics must be taken at optimal doses for extended periods before measurable improvement occurs, but they are generally very well tolerated. Their psychoactive properties are not produced by a single molecule but by a synergistic combination of several compounds. The available data suggest that including extracts from these plants in medicinal products to treat cognitive disorders can have substantial potential therapeutic benefits.

A new food and feed self-sufficiency model for the Czech Republic (RESTEP) was applied for the evaluation of possible adverse climate impacts uniformly reducing crop production by 5, 10, 20, and 30%. The situation was simulated for the whole country and four different agriculturally important regions. Biomass production modeling confirmed that for the whole country, the food self-sufficiency is secured up to 20% of yield decline for most crops, but even 5% yield decline of silage maize would lead to its shortage in animal feeding. On the other hand, regional results vary significantly. Regions Jižní Morava and Střední Čechy shown oversupply of feedstuff allowing them to cover the demands of cattle and pigs up to 20% or 30% decline of yield, respectively. The opposite model represents the Vysočina (VY) region which is not able to cover the demands from own sources even at the baseline scenario. The acreage extension of maize is not possible due to erosion risk restrictions at 25% of arable land at VY. The possible solution consists of extension acreage of alfalfa and clover or finding other plants sufficient for feeding as well for biogas facilities in regions rich in biomass energy consumers.

Solid phase of digestate (SD) of agricultural biogas plants, containing undecomposed fibrous fractions of organic matter, is usable as a constituent of growing substrates. The content of soluble salts and available nutrients is limiting for SD addition into growing substrates. For addition of SD with initial 80% moisture its content of ammonium nitrogen and available potassium is limiting. The SD with natural moistness can be used in peat based substrates up to 10% volume. The content of ammonium nitrogen during the drying of SD with the use of waste heat from biogas plants is decreased. Optimal proportion of dry SD (dSD) in peat based substrates ranged from 20 to 40% volume. Peat based substrates with 20% volume of dSD had suitable physical and chemical (e.g. content of available potassium < 300 mg/l) properties. These dSD-peat growing substrates have been successfully tested in greenhouse experiments with pot plants (Petunia, Impatiens, and Pelargonium). The addition of dSD to peat based substrates increased air capacity and decreased easily available water content. However, the basic fertilization of the dSD-peat growing substrates is necessary to optimize the content of nutrients.

The status of macronutrients phosphorus (P), potassium (K), sulphur (S), calcium (Ca) and magnesium (Mg) was assessed 15 years after the establishment of a long-term crop rotation and soil tillage trial with mouldboard ploughing (MP), no-till (NT), deep conservation tillage (CTd) and shallow conservation tillage (CTs). The mobile proportions of macronutrients in an Austrian Chernozem soil were determined to a depth of 50 cm with the single reagent extractant acetic acid (AA) and Mehlich 3 (M3), which uses several reagents as extractants. AA revealed less P and K, but more Ca and Mg compared to M3. Both extractants could capture the distribution pattern of the nutrients in the soil profile, but M3 showed higher differences among the soil layers. In the first 5 cm in NT, the P concentration was higher than in MP, CTd and CTs. The concentration of K was higher in NT, CTd and CTs than in MP in the first 10 cm of the soil. Phosphorus and K concentrations did not differ between tillage treatments below these soil layers, and S, Ca and Mg were similar in all soil layers. As none of the analysed elements except for Ca were fertilized and no accumulation of S, Ca and Mg was observed in the upper soil layer, the higher concentrations are attributed to accumulation through crop residues and then less leaching of P and K. Crop rotation did not affect the distribution of the analysed macronutrients in the soil but affected the nutrient uptake by winter wheat mostly due to the yield differences of winter wheat in the two crop rotations.

Four clones of short rotation coppice (SRCs) were investigated for phytoextraction of soil contaminated by risk elements (REs), especially Cd, Pb and Zn. As a main experimental factor, the influence of rotation length on the removal of REs was assessed. The field experiment with two Salix clones (S1 - (Salix schwerinii × Salix viminalis) ×S. viminalis; S2 - S. × smithiana) and two Populus clones (P1 - Populus maximowiczii × Populus nigra; P2 - P. nigra) was established in April 2008 on moderately contaminated soil. For the first time, all clones were harvested in February 2012 (20124y) after 4 years. Subsequently each plot was equally split into halves. The first half of the SRC clones was harvested in February 2014 after 2 years (20142y) and again it was harvested in February 2016 after further 2 years (20162y). The second half was harvested in February 2016 after 4 years (20164y). The results showed that the biomass production for the second 4-year harvest period was significantly higher for all clones but the metal concentration was lower in the mentioned period. 4-year rotation seems to be more advantageous for the phytoextraction than two 2-year rotations. The highest metal removal presented by remediation factors (RFs) per 4 years for Cd (6.39%) and for Zn (2.55%) were found for S2 in the harvest 20164y treatment. Removal of Pb was the highest by P1 clone with very low RF per 4 years (0.04%). Longer rotation is also economically superior.

Phytoremediation using maize (Zea mays L.) assisted by the compost or vermicompost amendments was the most appropriate strategy for bioremediation of soil contaminated by polycyclic aromatic hydrocarbons (PAHs) derived from biomass fly ash. Higher removal of low molecular weight PAHs than medium and high molecular weight PAHs within the same treatment were observed. The total PAH content in planted soil with compost or vermicompost was decreased in a range between 62.9-64.9%. There were no significant differences (P < 0.05) between the compost and vermicompost amendments on the total removal of ash-PAHs. The content of PAH derived by ash did not have adverse effect on maize cultivation and biomass yield. The contribution of PAH reduction by maize roots on the soil total PAH removal was negligible. Therefore, maize significantly boosted the PAH removal in soil. The harvested maize shoots did not represent any environmental risk.

In a two-year vegetation field experiment, the fertilizing effects of by-products from the agricultural biogas plant—a solid phase of digestate (SPD) and a liquid phase of digestate (LPD)—were studied and compared with mineral fertilization (NPK) on the biomass yield, content and nutrient uptake by Cannabis sativa L. plants. Furthermore, the agrochemical properties of the soil were evaluated at the end of the experiment. In all variants of the experiment, a uniform nitrogen dose of 150 kg/ha was applied. The dose of other nutrients corresponded to the fertilizer used. The biggest fertilizing effect, and therefore the greatest hemp biomass yield and nutrient uptake, was demonstrated when combining SPD and LPD fertilization in one treatment. However, the differences were statically insignificant (p ≤ 0.05). The applied amount appeared to be sufficient for the nutrition of hemp plants and was comparable to mineral fertilization. The distribution of nutrients between leaves and stems varied depending on the nutrient monitored. Analyses after the end of the experiment did not show different contents of accessible nutrients in the soil on the studied variants. The content of accessible risk elements in the soil was not affected by the application of the SPD and the LPD. The experiment showed that cannabis plants are able to achieve equivalent biomass yields (8.68 t/ha) using the combination of LPD and SPD by-products from a biogas plan compared to commercial mineral fertilizer (7.43 t/ha). Therefore, we can recommend a split application of LPD and SPD as a suitable alternative to mineral fertilization. Due to prolonged nutrient release from SPD, we can expect a smaller negative environmental impact than current fertilization practices.

The objective of this study was to assess the effect of biochar on growth and metabolism of spinach (Spinacia oleracea L.) and mustard (Sinapis alba L.) planted in crop rotation: spinach (spring)-mustard-spinach (autumn). The impact of biochar soil application (5% per mass of soil) on the availability of Ca, Fe, K, Mg, Na and P to plants as well as the content of free proline and total amino acids contents were evaluated at degraded Chernozem soil. The results showed that biochar soil addition significantly increased spinach growth by 102% and 353% in spring and autumn, respectively. Biochar limited plant content of Ca, Mg and Na, however K content increased in all plants. Inconsistent effect was determined for Fe and P content in plants biomass. Total content of free amino acids was higher in plants harvested at amended treatments, except autumn spinach. Biochar increased proline content in all plants in comparison to control. The highest increase was obtained in mustard - by 186%. The results showed a more sensitive reaction of mustard to biochar application than spinach.

Application of biomass ash to soil can save mineral nutrients due to its relatively high contents of Ca, K, and P. The study assessed the effect of powdered ash and pellets made from wood fly ash (WFA), combined moreover with additives rich in S (flue gas desulfurization gypsum - FGDG) and P (single superphosphate - SP) on the yield and uptake of nutrients (Ca, K, P, and S) by ryegrass (Lolium perenne L.), the accumulation of nutrients in plant biomass at individual four cuttings, and the available nutrients amount in the acidic loamy soil after the last harvest. Plants grown in pots enriched by wood ash showed significantly higher yield and nutrient uptake than in the unamended treatments. The uptake of nutrients by plants, content of nutrients in plants and in soil was substantially positively influenced by both components added to the wood ash, especially by FGD gypsum. The combination of wood ash with additives proved to be effective. The soil enrichment by WFA + SP + FGDG increased the availability of SP-contained P and available P content in soil even after harvest.

The purpose of the study was to understand the mechanisms of biochar-induced changes in the available content of aluminum (Al), cadmium (Cd), zinc (Zn), copper (Cu), and manganese (Mn) in a wide range of soils. Five soils from different regions of the Czech Republic were incubated for 12 weeks with four rates of biochar (0.5%, 2%, 4%, and 8% w/w). The available concentrations of Al, Cd, Zn, Cu, and Mn were determined on the 7th and 84th day of incubation. There was a significant decline in the available content of Al, Zn, Cu, Mn, and Cd except in the available content of Al in one soil, which is characterized by very low Al content, higher cation exchange capacity (CEC), and neutral pH = 7.0. The decline in the mobile contents of Al, Zn, Cu, Mn, and Cd was significant in all cases of 8% biochar rate. The decline in the content of Al, Zn, Cu, Mn, and Cd was mainly due to the increment in soil pH and increment in CEC, decline in dissolved organic carbon (DOC), and the release of exchangeable Ca2+ and K+ from biochar. The application of high amounts of biochar to soil could increase the available content of some metals like Al. On the other hand, biochar could efficiently reduce the mobility of Al, Zn, Cu, Mn, and Cd in soil, while the decline is mainly caused by biochar-induced changes in soil pH, CEC, DOC, and exchangeable Ca2+ and K+ content of treated soils.

Background and aimsHigh Al resistance of Rumex obtusifolius together with its ability to accumulate Al has never been studied in weakly acidic conditions (pH > 5.8) and is not sufficiently described in real soil conditions. The potential elucidation of the role of organic acids in plant can explain the Al tolerance mechanism.MethodsWe established a pot experiment with R. obtusifolius planted in slightly acidic and alkaline soils. For the manipulation of Al availability, both soils were untreated and treated by lime and superphosphate. We determined mobile Al concentrations in soils and concentrations of Al and organic acids in organs.ResultsAl availability correlated positively to the extraction of organic acids (citric acid < oxalic acid) in soils. Monovalent Al cations were the most abundant mobile Al forms with positive charge in soils. Liming and superphosphate application were ambiguous measures for changing Al mobility in soils. Elevated transport of total Al from belowground organs into leaves was recorded in both lime-treated soils and in superphosphate-treated alkaline soil as a result of sufficient amount of Ca available from soil solution as well as from superphosphate that can probably modify distribution of total Al in R. obtusifolius as a representative of "oxalate plants." The highest concentrations of Al and organic acids were recorded in the leaves, followed by the stem and belowground organ infusions.ConclusionsIn alkaline soil, R. obtusifolius is an Al-hyperaccumulator with the highest concentrations of oxalate in leaves, of malate in stems, and of citrate in belowground organs. These organic acids form strong complexes with Al that can play a key role in internal Al tolerance but the used methods did not allow us to distinguish the proportion of total Al-organic complexes to the free organic acids.

Both soil organic matter and sulfur (S) can reduce or even suppress mercury (Hg) mobility and bioavailability in soil. A batch incubation experiment was conducted with a Chernozem and a Luvisol artificially contaminated by 440 mg·kg−1 Hg showing wide differences in their physicochemical properties and available nutrients. The individual treatments were (i) digestate from the anaerobic fermentation of biowaste; (ii) fly ash from wood chip combustion; and (iii) ammonium sulfate, and every treatment was added with the same amount of S. The mobile Hg portion in Chernozem was highly reduced by adding digestate, even after 1 day of incubation, compared to control. Meanwhile, the outcome of these treatments was a decrease of mobile Hg forms as a function of incubation time whereas the contents of magnesium (Mg), potassium (K), iron (Fe), manganese (Mn), copper (Cu), zinc (Zn), and phosphorus (P) were stimulated by the addition of digestate in both soils. The available calcium (Ca) contents were not affected by the digestate addition. The experiment proved digestate application as the efficient measure for fast reduction of mobile Hg at extremely contaminated soils. Moreover, the decrease of the mobile mercury portion was followed by improvement of the nutrient status of the soils.

Abstract Background The application of a biochar in agronomical soil offers a dual benefit of improving soil quality and sustainable waste recycling. However, utilizing new organic waste sources requires exploring the biochar’s production conditions and application parameters. Woodchips (W) and bone-meat residues (BM) after mechanical deboning from a poultry slaughterhouse were subjected to pyrolysis at 300 °C and 500 °C and applied to cambisol and luvisol soils at ratios of 2% and 5% (w/w). Results Initially, the impact of these biochar amendments on soil prokaryotes was studied over the course of one year. The influence of biochar variants was further studied on prokaryotes and fungi living in the soil, rhizosphere, and roots of Triticum aestivum L., as well as on soil enzymatic activity. Feedstock type, pyrolysis temperature, application dose, and soil type all played significant roles in shaping both soil and endophytic microbial communities. BM treated at a lower pyrolysis temperature of 300 °C increased the relative abundance of Pseudomonadota while causing a substantial decrease in soil microbial diversity. Conversely, BM prepared at 500 °C favored the growth of microbes known for their involvement in various nutrient cycles. The W biochar, especially when pyrolysed at 500 °C, notably affected microbial communities, particularly in acidic cambisol compared to luvisol. In cambisol, biochar treatments had a significant impact on prokaryotic root endophytes of T. aestivum L. Additionally, variations in prokaryotic community structure of the rhizosphere depended on the increasing distance from the root system (2, 4, and 6 mm). The BM biochar enhanced the activity of acid phosphatase, whereas the W biochar increased the activity of enzymes involved in the carbon cycle (β-glucosidase, β-xylosidase, and β-N-acetylglucosaminidase). Conclusions These results collectively suggest, that under appropriate production conditions, biochar can exert a positive influence on soil microorganisms, with their response closely tied to the biochar feedstock composition. Such insights are crucial for optimizing biochar application in agricultural practices to enhance soil health.

Abstract Antibiotic resistance in staphylococcal strains and its impact on public health and agriculture are global problems. The development of new anti-staphylococcal agents is an effective strategy for addressing the increasing incidence of bacterial resistance. In this study, ethanolic extracts of Cannabis sativa L. made from plant parts harvested during the whole vegetation cycle under various nutritional treatments were assessed for in vitro anti-staphylococcal effects. The results showed that all the cannabis extracts tested exhibited a certain degree of growth inhibition against bacterial strains of Staphylococcus aureus, including antibiotic-resistant and antibiotic-sensitive forms. The highest antibacterial activity of the extracts was observed from the 5th to the 13th week of plant growth across all the nutritional treatments tested, with minimum inhibitory concentrations ranging from 32 to 64 µg/mL. Using HPLC, Δ9-tetrahydrocannabinolic acid (THCA) was identified as the most abundant cannabinoid in the ethanolic extracts. A homolog of THCA, tetrahydrocannabivarinic acid (THCVA), reduced bacterial growth by 74%. These findings suggest that the cannabis extracts tested in this study can be used for the development of new anti-staphylococcal compounds with improved efficacy.

Abstract Biochar made-up of dry olive residue (DOR), a biomass resulting from the olive oil extraction industry, has been proposed to be used as a reclamation agent for the recovery of metal contaminated soils. The aim of the present study was to investigate whether the soil application of DOR-based biochar alone or in combination with arbuscular mycorrhizal fungi (AMF) leads to an enhancement in the functionality and abundance of microbial communities inhabiting metal contaminated soils. To study that, a greenhouse microcosm experiment was carried out, where the effect of the factors (i) soil application of DOR-based biochar, (ii) biochar pyrolysis temperature (considering the variants 350 and 500 °C), (iii) soil application dose of biochar (2 and 5%), (iv) soil contamination level (slightly, moderately and highly polluted), (v) soil treatment time (30, 60 and 90 days) and (vi) soil inoculation with Funneliformis mosseae (AM fungus) on β-glucosidase and dehydrogenase activities, FA (fatty acid)-based abundance of soil microbial communities, soil glomalin content and AMF root colonization rates of the wheat plants growing in each microcosm were evaluated. Biochar soil amendment did not stimulate enzyme activities but increased microbial abundances. Dehydrogenase activity and microbial abundances were found to be higher in less contaminated soils and at shorter treatment times. Biochar pyrolysis temperature and application dose differently affected enzyme activities, but while the first factor did not have a significant effect on glucosidase and dehydrogenase, a higher biochar dose resulted in boosted microbial abundances. Soil inoculation with F. mosseae favored the proliferation of soil AMF community and increased soil glomalin content as well as rates of AMF root colonization. This factor also interacted with many of the others evaluated to significantly affect soil enzyme activities, microbial abundances and AMF community. Our results indicate that the application of DOR-based biochar along with AMF fungi is an appropriate approach to improve the status of microbial communities in soils with a moderate metal contamination at short-term.

Abstract Background Although fertilization and crop rotation practices are commonly used worldwide in agriculture to maximize crop yields, their long-term effect on the structures of soil microorganisms is still poorly understood. This study investigated the long-term impact of fertilization and crop rotation on soil microbial diversity and the microbial community structure in four different locations with three soil types. Since 1996, manure (MF; 330 kg N/ha), sewage sludge (SF; 330 and SF3x; 990 kg N/ha), and NPK (NPK; 330 kg N/ha) fertilizers were periodically applied to the soils classified as chernozem, luvisol and cambisol, which are among the most abundant or fertile soils used for agricultural purposes in the world. In these soils, potato (Solanum tuberosum L.), winter wheat (Triticum aestivum L.), and spring barley (Hordeum vulgare L.) were rotated every three years. Results Soil chemistry, which was significantly associated with location, fertilization, crop rotation, and the interaction of fertilization and location, was the dominant driver of soil microbial communities, both prokaryotic and fungal. A direct effect of long-term crop rotation and fertilization on the structure of their communities was confirmed, although there was no evidence of their influence on microbial diversity. Fungal and bacterial communities responded differently to fertilization treatments; prokaryotic communities were only significantly different from the control soil (CF) in soils treated with MF and SF3x, while fungal communities differed across all treatments. Indicator genera were identified for different treatments. These taxa were either specific for their decomposition activities or fungal plant pathogens. Sequential rotation of the three crops restricted the growth of several of the indicator plant pathogens. Conclusions Long-term fertilization and crop rotation significantly altered microbial community structure in the soil. While fertilization affected soil microorganisms mainly through changes in nutrient profile, crop rotations lead to the attraction and repulsion of specific plant pathogens. Such changes in soil microbial communities need to be considered when planning soil management.

Soil salinity and heavy metal (HM) pollution of soil is an ongoing threat to the plants’ survival that adversely affect the crop productivity and global food security. Therefore, an eco-friendly solution is highly desirable for mitigating the adverse affect of toxic pollutants in plants and soils. This study was aimed to explore how municipal solid waste compost (CO) or farmyard manure (M) supplementation regulates biomass yield, mineral nutritions under salinity, and distribution profile of toxic pullutants of (Medicago sativa L.) and sorghum [Sorghum bicolor (L.) Moench]. The CO and M were supplemented with saline (NaCl) soils, the total experiments were conducted for the three consecutive harvestings (H1, H2 and H3) of sorghum and alfalfa. In this study, the CO supplementation highly enhanced biomas yield (dry weight basis in sorghum during H2, while it showed higher in alfalfa during H3., Interestingly, the M significantly increased nitrogen (N2) and potassium (K+) but reduced sodium (Na+) in alfalfa, while the higher Na+ and phosphorus (P) were accumulated in sorghum fertilizer. As a consequence of these finding, a positive correlation was observed among the plant biomass yield, N and K+ content in alfalfa. Conversely, the high Na+ present in soil declined plant biomass in surghum, indicating that CO supplemetaton was not fully effective under high saline soil conditions. However, the N-P-K distribution improved due to CO and/or M supplementation in saline soils, while Cd accumulation was higher in sorghum compared to alfalfa. Therefore, sorghum can be used to clean up contaminated environments. The PCA results showed the same clusters of treatments and amedments were grouped in same plot, which indicated positive correlation beteween the treatment groups and plants, repectively. These results suggest that M supplementation is useful to mitigate saline stress compared to CO in alfalfa, while sorghum can be recommended as to clean up heavy metals (HMs) from soils. This study further suggest a correlation of minerals (N-P-K) boosting and salinity stress reduction in plants. Therefore, organic amendment-based ecofriendly approach can be useful to mitigate salinity stress in plants as well as effective for clean environment and smart agriculture.

Abstract  The Ruzyně Fertilizer Experiment (RFE, the Czech Republic) was established on a permanent arable field (illimerized Luvisol) in 1955. The effects of long-term application of several organic fertilizers (dung water, farmyard manure, poultry litter) and mineral N, P and K fertilizers on plant-available (extracted by CaCl2), easily mobilizable (extracted by EDTA), potentially mobilizable (extracted by HNO3) and total concentrations of trace elements were investigated in 2008. Concentrations of all analyzed trace elements in the applied fertilizers did not exceed the limits permitted by Czech national legislation. Concentrations of As, Cd and Cr were highest in single superphosphate, those of Cu, Mn and Ni were highest in poultry litter and those of Pb and Zn were highest in dung water. Poultry litter had the second highest concentration of As and Zn. Poultry litter supplied the soils with considerable amounts of Cu, Mn and Zn and increased their concentrations in the soil. There was also a significant increase in plant availability of Mn, Ni and Zn and a decrease in soil pH. Although all fertilizers were applied for five decades, total concentrations of As, Cr, Cu, Ni, Pb and Zn in soil remained far below Czech legislation limits. For Cu and Zn this was probably due to the relatively low mean annual application rates of poultry litter. Total Cd concentrations in soil exceeded the legislative limit even in the control (without any fertilizer inputs) and the effect of treatment was not significant. This indicates that fertilizers were not the main source of Cd in the experimental area. Therefore, common cropping practices do not induce soil contamination by trace elements even if they have been applied for more than 50 years. [ABSTRACT FROM AUTHOR]

Abstract  The Rengen Grassland Experiment (RGE) was established in the Eifel Mts. (Germany) on a low productive Nardetum in 1941. Since then, the following fertiliser treatments have been applied along with a two cut system: unfertilised control, Ca, CaN, CaNP, CaNP–KCl and CaNP–K2SO4 with basic slag (syn. Thomas phosphate) as the only P fertiliser. The effect of long-term fertilisation on plant-available (extracted with 0.01 mol l−1 CaCl2), easily-mobilisable (extracted with 0.05 mol l−1 EDTA), potentially-mobilisable (extracted with 2 mol l−1 HNO3) and total concentrations of trace elements (As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in the top 0–10 and 10–20 cm of soil were investigated in 2006. According to redundancy analysis (RDA), the effect of treatment on the concentrations of risk elements was significant and explained 82.3 and 90.6% of the variability in the data in the 0–10 and 10–20 cm soil layers, respectively. Basic slag supplied the soil with considerable amounts of As, Cr, Cu, Fe, Mn and Zn. Following 65 years of fertiliser application the concentrations of risk elements in the soil profile had increased substantially, especially with basic slag. However, threshold limits for total trace element concentration in soil permitted by Czech national legislation were exceeded only in the case of As. The increase in plant-available As concentrations was most critical as it increased the potential uptake of As by plants in plots fertilised with P. Although P treatments received more than 300 g of Cr ha−1 annually, no effect on plant-available Cr soil content was detected. This contrasted with the accumulation of total Cr in the 0–10 and 10–20 cm soil layers. Furthermore, plant availability of Cd, Fe, Mn and Zn was affected by soil pH and generally decreased with the application of quick lime. Plant availability of these elements was not correlated with amounts supplied by fertilisers. [ABSTRACT FROM AUTHOR]

Abstract  In the soil solutions obtained in situ with suction cups from soils (Cambisol and Fluvisol) of pot experiment with Salix smithiana Smith, Lolium perenne L. and Thlaspi caerulescens J. & C. Presl heavy metals species (Cd, Pb and Cu) were assayed by differential pulse anodic stripping voltammetry and diffusive gradient in thin films. Prediction of accumulation performed best at free metal ion concentrations in unchanged pH (in 10−3 mol L−1 NaClO4 base electrolyte). The speciation provided by differential pulse anodic stripping voltammetry according to pH can provide a detailed description of the soil solution matrix. The concentration of free metals in unchanged pH represents a small part of the total content and varied from 0.04 to 0.75% with two exceptions found for accumulating plants (the content of Cd2+ in the soil solution from T. caerulescens was about 6% and the content of Cu2+ in the soil solution from S. smithiana was about 30%). The available concentration as determined by diffusive gradient in thin films was not in correlation with the heavy metals concentration in plant biomass. [ABSTRACT FROM AUTHOR]

Twelve soil samples differing in physicochemical properties and total element contents were extracted by three sequential extraction procedures to determine As, Cd, Pb, and Zn bound to individual soil fractions and are defined by individual operational procedures. In the case of arsenic, two additional sequential extraction schemes were designed entirely for fractionation of soil containing arsenic were tested. The results confirmed that determination of element proportions bound to individual soil fractions is strongly dependent on the extracting agent and/or procedure applied within individual extracting schemes. As expected, absolute values of the elements released among the individual extracting procedures are weakly comparable. More reliable results were determined for the more mobile soil elements i.e. cadmium and zinc, in the fractions characterizing the most mobile proportions of investigated elements where significant correlations with basic soil characteristics were observed. In contrast, ambiguous results were observed for As and Pb, for both the individual extraction procedures and the effect of the soil characteristics. Regardless of the studied element, the poorest results were determined for reducible and oxidizable soil fractions. The application of at least two independent procedures or modification of the extraction scheme according to element investigated and/or particular soil characteristics can also be helpful in definition of element pattern in soils in further research. [ABSTRACT FROM AUTHOR]

Fertilization is a worldwide agricultural practice used in agronomy to increase crop yields. Fertilizer application influences overall soil characteristics, including soil microbial community composition and metabolic processes mediated by microbial enzymatic activity. Changes in the structure of microbial communities and their metabolic activity after long-term fertilization were studied in this research. We hypothesized that the different types of fertilization regimes affect nutrient levels in the soil which subsequently influence the metabolic processes and microbial diversity and community structure. Manure (MF; 330 kg N/ha), sewage sludge at two application doses (SF; 330 kg N/ha and SF3x; 990 kg N/ha) and chemical (NPK; N-P-K nutrients in concentrations of 330-90-300 kg/ha) fertilizers have been applied regularly to an experimental field since 1996. The microbial diversity increased in all soils amended with both organic (MF, SF, SF3x) and chemical (NPK) fertilizers. The shifts in microbial communities were observed, which were mainly caused by less abundant genera that were mostly associated with one or more fertilization treatment(s). Fertilization also influenced soil chemistry and the activity of β-xylosidase, β-N-acetylglucosaminidase (NAG), acid phosphatase and FDA-hydrolases. Specifically, all fertilization treatments were associated with a higher activity of β xylosidase and lower NAG activity. Only the NPK treatment was associated with a higher activity of acid phosphatase.

Salt stress is one of the most serious environmental stressors that affect productivity of salt-sensitive crops. Medicago ciliaris is an annual legume whose adaptation to agroclimatic conditions has not been well described. This study focused on the salinity tolerance of M. ciliaris genotypes compared to M. intertexta and M. scutellata in terms of plant growth, physiology, and biochemistry. Salt tolerance was determined at both germination and early seedling growth. Germination and hydroponic assays were used with exposing seeds to 0, 50, 100, 150, and 200 mM NaCl. Among seven genotypes of M. ciliaris studied, Pop1, 355, and 667, were most salt tolerant. Populations like 355 and 667 showed marked tolerance to salinity at both germination and seedling stages (TI ≤1, SI(FGP) > 0 increased FGP ≥ 20% and SI(DW) < 0 (DW decline ≤ 20%); at 100 mM); while Pop1 was the most salt tolerant one at seedling stages with (TI =1.79, SI(FGP) < 0 decline of FGP ≤ 40% and with increased DW to 79%); at 150 mM NaCl). The genotypes, 306, 773, and M. scutellata, were moderately tolerant to salt stress depending on salt concentration. Our study may be used as an efficient strategy to reveal genetic variation in response to salt stress. This approach allows selection for desirable traits, enabling more efficient applications in breeding methods to achieve stress-tolerant M. ciliaris populations.