Search

Acetogenic Clostridia are obligate anaerobes that have emerged as promising microbes for the renewable production of biochemicals owing to their ability to efficiently metabolize sustainable single‐carbon feedstocks. Additionally, Clostridia are increasingly recognized for their biosynthetic potential, with recent discoveries of diverse secondary metabolites ranging from antibiotics to pigments to modulators of the human gut microbiota. Lack of efficient methods for genomic integration and expression of large heterologous DNA constructs remains a major challenge in studying biosynthesis in Clostridia and using them for metabolic engineering applications. To overcome this problem, we harnessed chassis‐independent recombinase‐assisted genome engineering (CRAGE) to develop a workflow for facile integration of large gene clusters (>10 kb) into the human gut acetogen Eubacterium limosum. We then integrated a non‐ribosomal peptide synthetase gene cluster from the gut anaerobe Clostridium leptum, which previously produced no detectable product in traditional heterologous hosts. Chromosomal expression in E. limosum without further optimization led to production of phevalin at 2.4 mg/L. These results further expand the molecular toolkit for a highly tractable member of the Clostridia, paving the way for sophisticated pathway engineering efforts, and highlighting the potential of E. limosum as a Clostridial chassis for exploration of anaerobic natural product biosynthesis. [ABSTRACT FROM AUTHOR]

Pseudomonas putida has emerged as a promising host for the conversion of biomass‐derived sugars and aromatic intermediates into commercially relevant biofuels and bioproducts. Most of the strain development studies previously published have focused on P. putida KT2440, which has been engineered to produce a variety of non‐native bioproducts. However, P. putida is not capable of metabolizing pentose sugars, which can constitute up to 25% of biomass hydrolysates. Related P. putida isolates that metabolize a larger fraction of biomass‐derived carbon may be attractive as complementary hosts to P. putida KT2440. Here we describe genetic tool development for P. putida M2, a soil isolate that can metabolize pentose sugars. The functionality of five inducible promoter systems and 12 ribosome binding sites was assessed to regulate gene expression. The utility of these expression systems was confirmed by the production of indigoidine from C6 and C5 sugars. Chromosomal integration and expression of non‐native genes was achieved by using chassis‐independent recombinase‐assisted genome engineering (CRAGE) for single‐step gene integration of biosynthetic pathways directly into the genome of P. putida M2. These genetic tools provide a foundation to develop hosts complementary to P. putida KT2440 and expand the ability of this versatile microbial group to convert biomass to bioproducts. [ABSTRACT FROM AUTHOR]

The increasing demands placed on natural resources for fuel and food production require that we explore the use of efficient, sustainable feedstocks such as brown macroalgae. The full potential of [...]

The past decade has been a golden age for microbiology, marked by the discovery of an unprecedented increase in the number of novel bacterial species. Yet gaining biological knowledge of those organisms has not kept pace with sequencing efforts. To unlock this genetic potential there is an urgent need for generic (i.e. non-species specific) genetic toolboxes. Recently, we developed a method, termed chassis-independent recombinase-assisted genome engineering (CRAGE), enabling the integration and expression of large complex gene clusters directly into the chromosomes of diverse bacteria. Here we expand upon this technology by incorporating CRISPR-Cas9 allowing precise genome editing across multiple bacterial species. To do that we have developed a landing pad that carries one wild-type and two mutant lox sites to allow integration of foreign DNA at two locations through Cre-lox recombinase-mediated cassette exchange (RMCE). The first RMCE event is to integrate the Cas9 and the DNA repair protein genes RecET, and the second RMCE event enables the integration of customized sgRNA and a repair template. Following this workflow, we achieved precise genome editing in four different gammaproteobacterial species. We also show that the inserted landing pad and the entire editing machinery can be removed scarlessly after editing. We report here the construction of a single landing pad transposon and demonstrate its functionality across multiple species. The modular design of the landing pad and accessory vectors allows design and assembly of genome editing platforms for other organisms in a similar way. We believe this approach will greatly expand the list of bacteria amenable to genetic manipulation and provides the means to advance our understanding of the microbial world. [ABSTRACT FROM AUTHOR]

Microbial genomes encode numerous biosynthetic gene clusters (BGCs) that may produce natural products with diverse applications in medicine, agriculture, the environment, and materials science. With the advent of genome sequencing and bioinformatics, heterologous expression of BGCs is of increasing interest in bioactive natural product (NP) discovery. However, this approach has had limited success because expression of BGCs relies heavily on the physiology of just a few commonly available host chassis. Expanding and diversifying the chassis portfolio for heterologous BGC expression may greatly increase the chances for successful NP production. In this review, we first discuss genetic and genome engineering technologies used to clone, modify, and transform BGCs into multiple strains and to engineer chassis strains. We then highlight studies that employed the multi-chassis approach successfully to optimize NP production, discover previously uncharacterized NPs, and better understand BGC function. [ABSTRACT FROM AUTHOR]

Monitoring population dynamics in co-culture is necessary in engineering microbial consortia involved in distributed metabolic processes or biosensing applications. However, it remains difficult to measure strain-specific growth dynamics in high-throughput formats. This is especially vexing in plate-based functional screens leveraging whole-cell biosensors to detect specific metabolic signals. Here, we develop an experimental high-throughput co-culture system to measure and model the relationship between fluorescence and cell abundance, combining chassis-independent recombinase-assisted genome engineering (CRAGE) and whole-cell biosensing with a PemrR-green fluorescent protein (GFP) monoaromatic reporter used in plate-based functional screening. CRAGE was used to construct Escherichia coli EPI300 strains constitutively expressing red fluorescent protein (RFP) and the relationship between RFP expression and optical density (OD600) was determined throughout the EPI300 growth cycle. A linear equation describing the increase of normalized RFP fluorescence during deceleration phase was derived and used to predict biosensor strain dynamics in co-culture. Measured and predicted values were compared using flow cytometric detection methods. Induction of the biosensor lead to increased GFP fluorescence normalized to biosensor cell abundance, as expected, but a significant decrease in relative abundance of the biosensor strain in co-culture and a decrease in bulk GFP fluorescence. Taken together, these results highlight sensitivity of population dynamics to variations in metabolic activity in co-culture and the potential effect of these dynamics on the performance of functional screens in plate-based formats. The engineered strains and model used to evaluate these dynamics provide a framework for optimizing growth of synthetic co-cultures used in screening, testing and pathway engineering applications. [ABSTRACT FROM AUTHOR]

The directed evolution of AraC to build an arabinose-inducible system, which is more compatible with (isopropyl-[beta]-D-1-thiogalactopyranoside) induction of a lactose-inducible system is presented.

Diverse soil-resident bacteria can contribute to plant growth and health, but the molecular mechanisms enabling them to effectively colonize their plant hosts remain poorly understood. We used randomly barcoded transposon mutagenesis sequencing (RB-TnSeq) in Pseudomonas simiae, a model root-colonizing bacterium, to establish a genome-wide map of bacterial genes required for colonization of the Arabidopsis thaliana root system. We identified 115 genes (2% of all P. simiae genes) with functions that are required for maximal competitive colonization of the root system. Among the genes we identified were some with obvious colonization-related roles in motility and carbon metabolism, as well as 44 other genes that had no or vague functional predictions. Independent validation assays of individual genes confirmed colonization functions for 20 of 22 (91%) cases tested. To further characterize genes identified by our screen, we compared the functional contributions of P. simiae genes to growth in 90 distinct in vitro conditions by RB-TnSeq, highlighting specific metabolic functions associated with root colonization genes. Our analysis of bacterial genes by sequence-driven saturation mutagenesis revealed a genome-wide map of the genetic determinants of plant root colonization and offers a starting point for targeted improvement of the colonization capabilities of plant-beneficial microbes. [ABSTRACT FROM AUTHOR]

We present 1,003 reference genomes that were sequenced as part of the Genomic Encyclopedia of Bacteria and Archaea (GEBA) initiative, selected to maximize sequence coverage of phylogenetic space. These genomes double the number of existing type strains and expand their overall phylogenetic diversity by 25%. Comparative analyses with previously available finished and draft genomes reveal a 10.5% increase in novel protein families as a function of phylogenetic diversity. The GEBA genomes recruit 25 million previously unassigned metagenomic proteins from 4,650 samples, improving their phylogenetic and functional interpretation. We identify numerous biosynthetic clusters and experimentally validate a divergent phenazine cluster with potential new chemical structure and antimicrobial activity. This Resource is the largest single release of reference genomes to date. Bacterial and archaeal isolate sequence space is still far from saturated, and future endeavors in this direction will continue to be a valuable resource for scientific discovery. [ABSTRACT FROM AUTHOR]

Summary: Nature has balanced most metabolic pathways such that no one enzyme in the pathway controls the flux through that pathway. However, unnatural or nonnative, constructed metabolic pathways may have limited product flux due to unfavorable in vivo properties of one or more enzymes in the pathway. One such example is the mevalonate-based isoprenoid biosynthetic pathway that we previously reconstructed in Escherichia coli. We have used a probable mechanism of adaptive evolution to engineer the in vivo properties of two enzymes (3-hydroxy-3-methylglutaryl-CoA reductase [tHMGR] and many terpene synthases) in this pathway and thereby eliminate or minimize the bottleneck created by these inefficient or nonfunctional enzymes. Here, we demonstrate how we significantly improved the productivity (by ∼1000 fold) of this reconstructed biosynthetic pathway using this strategy. We anticipate that this strategy will find broad applicability in the functional construction (or reconstruction) of biological pathways in heterologous hosts. [Copyright &y& Elsevier]

Summary: The combined approaches of rational design and random mutagenesis were applied to generate a sesquiterpene synthase with an altered activity. Due to the lack of a convenient screen for sesquiterpene synthase activity, a high-throughput dual-activity screen was used by fusing (+)-δ-cadinene synthase to chloramphenicol acetyltransferase (CAT). The gene encoding (+)-δ-cadinene synthase was mutagenized using error-prone PCR. The resulting mutant fusion proteins were screened for CAT activity and altered sesquiterpene selectivity. Twenty-one clones producing (+)-δ-cadinene and germacrene D-4-ol in different ratios were isolated from the library. Analysis using a homology model of (+)-δ-cadinene synthase suggested that the G helix plays a very important role in (+)-δ-cadinene formation. Reconstruction of the G helix using site-directed, saturation mutagenesis yielded a mutant, N403P/L405H, that maintained its specific activity and showed higher selectivity to germacrene D-4-ol in vivo (up to 93%). [Copyright &y& Elsevier]