Search

This paper presents a series of large-scale wave flume experiments on the scour protection damage around a monopile under combined waves and current conditions with model scales of 1:16.67 and 1:8.33. The main objective is to compare the damage data obtained from these large-scale models with existing monopile scour protection design approaches, which were proposed based on small scale wave flume experiments, and to study the applicability of the existing approaches. The static stability (onset of motion and bed shear stress) and the dynamic stability (three-dimensional damage numbers) of the scour protection are investigated. Both results show that the existing design approaches can be conservative when applied to large scale models, which highlights the need of further investigations on scale and model effects. In addition, this paper also analyses the scour protection damage depth. It is observed that damage depths of the scour protection layer under low Keulegan&ndash, Carpenter number (KC) conditions are smaller than predictions. The study provides valuable large scale experimental data for future research on the monopile scour protection design.

The present work introduces an analysis of the measurement and model effects that exist in monopile scour protection experiments with repeated small scale tests. The damage erosion is calculated using the three dimensional global damage number S3D and subarea damage number S3D,i. Results show that the standard deviation of the global damage number σ(S3D)=0.257 and is approximately 20% of the mean S3D, and the standard deviation of the subarea damage number σ(S3D,i)=0.42 which can be up to 33% of the mean S3D. The irreproducible maximum wave height, chaotic flow field and non-repeatable armour layer construction are regarded as the main reasons for the occurrence of strong model effects. The measurement effects are limited to σ(S3D)=0.039 and σ(S3D,i)=0.083, which are minor compared to the model effects.