Search

Understanding the molecular drivers and feedback loops of osteoarthritis (OA) may provide future therapeutic strategies to modulate the disease progression. The current paradigm of OA is evolving from a purely mechanical disease caused by cartilage wear toward a complex biological response connecting biomechanics, inflammation, and the immune system. The view of OA as a chronic wound highlights the role inflammation plays and also the body's attempts to repair an ongoing injury. Inflammatory signals, including cytokines such as interleukin-1 and tissue necrosis factor α, surface-expressed pattern recognition receptors such as toll-like receptors 2 and 4, complement factors such as C5, as well as pathogen-associated molecular patterns and damage-associated molecular patterns drive the enzymatic cascade that degrades cartilage matrix in OA. Considering the joint as an entire organ, interactions between the cells that reside in the synovium including macrophages and other immune cells, appear to drive enzymatic activity in cartilage, which, in turn, feeds signals back to the synovium that continues stimulating degradation in a feed-forward loop. This review will explore the potential roles of immune cells such as macrophages and T cells in the synovium in both stimulating and modulating the inflammatory response in OA. © 2019 Orthopedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:253-257, 2020.

Poly(ethylene glycol) (PEG) is widely used to modulate the hydration states of biomaterials and is often applied to produce non-fouling surfaces. Here, we present X-ray scattering data which show that it is the surface segregation of PEG, not just its presence in the bulk, that makes this happen by influencing the hydrophilicity of PEG-containing substrates. We demonstrate a temperature-dependent trigger that transforms a PEG-containing substrate from a protein-adsorbing to a protein-repelling state. On films of poly(desaminotyrosyl-tyrosineco-PEG carbonate) with high (20 wt %) PEG content, in which very little protein adsorption would have been expected, quartz crystal microbalance (QCM) data showed significant adsorption of fibrinogen (Fg) and bovine serum albumin (BSA) at 8 °C. The surface became protein-repellent at 37.5 °C. When the same polymer was iodinated, the polymer was protein adsorbent, even when 37 wt % PEG was incorporated into the polymer backbone. This demonstrates that high PEG content by itself is not sufficient to repel proteins. By inhibiting phase separation either with iodine or by lowering the temperature, we show that PEG must phase separate and bloom to the surface in order to create an antifouling surface. These results suggest an opportunity to design materials with high-PEG content that can be switched from a protein-attractant to a protein-repellent state by inducing phase separation through a brief exposure to temperatures above their glass transition temperature.

Biomaterials induce an immune response and mobilization of macrophages, yet identification and phenotypic characterization of functional macrophage subsets in vivo remain limited. We performed single-cell RNA sequencing analysis on macrophages sorted from either a biologic matrix [urinary bladder matrix (UBM)] or synthetic biomaterial [polycaprolactone (PCL)]. Implantation of UBM promotes tissue repair through generation of a tissue environment characterized by a T helper 2 (TH2)/interleukin (IL)-4 immune profile, whereas PCL induces a standard foreign body response characterized by TH17/IL-17 and fibrosis. Unbiased clustering and pseudotime analysis revealed distinct macrophage subsets responsible for antigen presentation, chemoattraction, and phagocytosis, as well as a small population with expression profiles of both dendritic cells and skeletal muscle after UBM implantation. In the PCL tissue environment, we identified a CD9hi+IL-36γ+ macrophage subset that expressed TH17-associated molecules. These macrophages were virtually absent in mice lacking the IL-17 receptor, suggesting that they might be involved in IL-17-dependent immune and autoimmune responses. Identification and comparison of the unique phenotypical and functional macrophage subsets in mouse and human tissue samples suggest broad relevance of the new classification. These distinct macrophage subsets demonstrate previously unrecognized myeloid phenotypes involved in different tissue responses and provide targets for potential therapeutic modulation in tissue repair and pathology.

Urinary bladder matrix (UBM) is used clinically for management of wounds and reinforcement of surgical soft tissue repair, among other applications. UBM consists of the lamina propria and basal lamina of the porcine urinary bladder, and is decellularized as part of the process to manufacture the medical device. UBM is composed mainly of Collagen I, but also contains a wide variety of fibrillar and basement membrane collagens, glycoproteins, proteoglycans and ECM-associated factors. Upon application of the biomaterial in a traumatic or nontraumatic setting in a mouse model, there is a cascade of immune cells that respond to the damaged tissue and biomaterial. Here, through the use of multicolor flow cytometry, we describe the various cells that infiltrate the UBM scaffold in a subcutaneous and volumetric muscle injury model. A wide variety of immune cells are found in the UBM scaffold immune microenvironment (SIM) including F4/80(+) macrophages, CD11c(+) dendritic cells, CD3(+) T cells and CD19(+) B cells. A systemic IL-4 upregulation and a local M2-macrophage response were observed in the proximity of the implanted UBM. The recruitment and activation of these cells is dependent upon signals from the scaffold and communication between the different cell types present.

Hyaluronic acid (HA) solutions effectively lubricate the ocular surface and are used for the relief of dry eye related symptoms. However, HA undergoes rapid clearance due to limited adhesion, which necessitates frequent instillation. Conversely, highly viscous artificial tear formulations with HA blur vision and interfere with blinking. Here, we developed an HA-eye drop formulation that selectively binds and retains HA for extended periods of time on the ocular surface. We synthesized a heterobifunctional polymer-peptide system with one end binding HA while the other end binding either sialic acid-containing glycosylated transmembrane molecules on the ocular surface epithelium, or type I collagen molecule within the tissue matrix. HA solution was mixed with the polymer-peptide system and tested on both ex vivo and in vivo models to determine its ability to prolong HA retention. Furthermore, rabbit ocular surface tissues treated with binding peptides and HA solutions demonstrated superior lubrication with reduced kinetic friction coefficients compared to tissues treated with conventional HA solution. The results suggest that binding peptide-based solution can keep the ocular surface enriched with HA for prolonged times as well as keep it lubricated. Therefore, this system can be further developed into a more effective treatment for dry eye patients than a standard HA eye drop. Statement of Significance Eye drop formulations containing HA are widely used to lubricate the ocular surface and relieve dry eye related symptoms, however its low residence time remains a challenge. We designed a polymer-peptide system for the targeted delivery of HA to the ocular surface using sialic acid or type I collagen as anchors for HA immobilization. The addition of the polymer-peptide system to HA eye drop exhibited a reduced friction coefficient, and it can keep the ocular surface enriched with HA for prolonged time. This system can be further developed into a more effective treatment for dry eye than a standard HA eye drop.

Functionalization of surfaces with poly(sodium styrenesulfonate) (poly(NaSS)) has recently been found to enhance osteointegration of implantable materials. Radical polymerization of poly(NaSS) on titanium (Ti)-based substrates has been used to improve their long-term performance by preventing fibrosis and consequently implant loosening. However, the influence of the sulfonate groups on the early cell behavior and the associated molecular phenomena remains to be understood. In this work, we used quartz crystal microbalance with dissipation (QCM-D) to elucidate the role of poly(NaSS) in enhancing osteoblastic cell attachment. This was measured by following the cell attachment using the MC3T3-E1 cell line, on fetal bovine serum (FBS) preadsorbed surfaces and on substrates adsorbed with a series of relevant proteins, bovine serum albumin (BSA), fibronectin (Fn), and collagen type I (Col I). Comparison of the performance of poly(NaSS) with other clinically important substrates such as Ti alloy Ti6Al4V, gold, and poly(desamino-tyrosyl-tyrosine ethyl ester carbonate) (poly(DTEc)) indicates poly(NaSS) to be a superior substrate for MC3T3-E1 cells attachment. This attachment was found to be integrin mediated in the presence of Fn and Col I. Antibodies specific to the RGD peptide and the N- and C-terminal HB-binding domains reacted more intensively with Fn adsorbed on poly(NaSS). Fn adapts a conformation favorable to RGD mediated cell attachment when adsorbed onto poly(NaSS).

This article focuses on elucidating the key presentation features of neurotrophic ligands at polymer interfaces. Different biointerfacial configurations of the human neural cell adhesion molecule L1 were established on two-dimensional films and three-dimensional fibrous scaffolds of synthetic tyrosine-derived polycarbonate polymers and probed for surface concentrations, microscale organization, and effects on cultured primary neurons and neural stem cells. Underlying polymer substrates were modified with varying combinations of protein A and poly-d-lysine to modulate the immobilization and presentation of the Fc fusion fragment of the extracellular domain of L1 (L1-Fc). When presented as an oriented and multimeric configuration from protein A-pretreated polymers, L1-Fc significantly increased neurite outgrowth of rodent spinal cord neurons and cerebellar neurons as early as 24 h compared to the traditional presentation via adsorption onto surfaces treated with poly-d-lysine. Cultures of human neural progenitor cells screened on the L1-Fc/polymer biointerfaces showed significantly enhanced neuronal differentiation and neuritogenesis on all protein A oriented substrates. Notably, the highest degree of βIII-tubulin expression for cells in 3-D fibrous scaffolds were observed in protein A oriented substrates with PDL pretreatment, suggesting combined effects of cell attachment to polycationic charged substrates with subcellular topography along with L1-mediated adhesion mediating neuronal differentiation. Together, these findings highlight the promise of displays of multimeric neural adhesion ligands via biointerfacially engineered substrates to “cooperatively” enhance neuronal phenotypes on polymers of relevance to tissue engineering.